STM32L053R8T7 vs STM32L053R8T6 Comparison

Detailed side-by-side comparison of STM32L053R8T7 by STMicroelectronics and STM32L053R8T6 by STMicroelectronics. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

STMicroelectronics
STM32L053R8T7 STM32L053R8T7 - 32MHz Cortex-M0+ 64KB MCU | STMicroelectronics

STM32L053R8T7 - 32MHz Cortex-M0+ 64KB MCU | STMicroelectronics

STM32L053R8T7 ✓ Active
STMicroelectronics
STM32L053R8T6 STM32L053R8T6 - 32MHz Ultra-Low-Power Cortex-M0+ MCU | ST

STM32L053R8T6 - 32MHz Ultra-Low-Power Cortex-M0+ MCU | ST

STM32L053R8T6 ✓ Active

Specification Comparison

Parameter STM32L053R8T7 STM32L053R8T6
Brand STMicroelectronics STMicroelectronics
Category Microcontrollers Microcontrollers
Lifecycle Status Active Active
Product Type 32-bit ultra-low-power microcontroller —
Processor Core Arm Cortex-M0+ —
Architecture 32-bit —
Maximum CPU Frequency 32 MHz 32 MHz
Flash Memory 64 KB —
Flash Organization 64K x 8 —
RAM Capacity [DATA_NEEDED: RAM capacity] —
USB Version USB 2.0 —
USB Clocking Crystal-less —
Display Support LCD —
Supply Voltage 2.5 V / 3.3 V —
Package 64-LQFP (10 x 10 mm) —
Pin Count 64 pins —
Mounting Type Surface mount Surface Mount
Power Class Ultra-low-power —
Series STM32L0 —
RoHS Status [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Core Processor — ARM Cortex-M0+
Core Architecture — 32-bit
Flash Memory Size — 64 KB (64K x 8)
SRAM Size — 8 KB
Supply Voltage Range — 1.8 V to 3.6 V (BOR enabled; down to 1.65 V in power-down without BOR)
Operating Temperature Range — -40 C to +125 C
Package / Case — 64-LQFP (10x10 mm)
Number of Pins — 64
USB Controller — USB 2.0 full-speed crystal-less device
ADC — 12-bit with hardware oversampling up to 16-bit resolution
DAC — 12-bit
Comparators — 2 ultra-low-power comparators
LCD Driver — Up to 8x28 segments
Communication Interfaces — I2C, SPI, USART
Run Mode Current — 84 uA/MHz (typical)
Standby Current with RTC — 0.29 uA (typical)
Number of GPIOs — [DATA_NEEDED: Number of GPIOs]
RoHS — Compliant

Datasheets & Resources

Browse All Products Create BOM Request Quote