STM32L412RBT6P vs STM32L433RBT6 Comparison
Detailed side-by-side comparison of STM32L412RBT6P by STMicroelectronics and STM32L433RBT6 by STMicroelectronics. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
STMicroelectronics
STM32L412RBT6P - 80MHz Cortex-M4 MCU 128KB Flash LQFP-64 | STMicroelectronics
STM32L412RBT6P ✓ ActiveSpecification Comparison
| Parameter | STM32L412RBT6P | STM32L433RBT6 |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Category | Microcontrollers | Microcontrollers |
| Lifecycle Status | Active | Active |
| Core Architecture | Arm Cortex-M4 with FPU (single precision) | — |
| Maximum Clock Frequency | 80 MHz (100 DMIPS) | — |
| Program Flash Memory | 128 KB (single bank) | — |
| SRAM | 40 KB | 64 KB |
| Supply Voltage (VDD) | 1.71 V to 3.6 V | — |
| Operating Temperature Range | -40 C to +85 C | -40 °C to 85 °C, 105 °C, or 125 °C |
| Package | 64-LQFP (10x10 mm) | 64-LQFP (10 mm × 10 mm) |
| Pin Count | 64 | — |
| ADC | 1 x 12-bit, 5 Msps (up to 16 channels) | — |
| DAC | 2 x 12-bit | — |
| Comparators | 2 x rail-to-rail | — |
| Operational Amplifiers | 2 x on-chip OPAMP | — |
| USB | USB 2.0 Full-Speed Device (with dedicated 48 MHz OSC) | — |
| CAN | 1 x CAN 2.0B | — |
| Communication Peripherals | 3x I2C, 3x SPI, 3x USART + 1x UART | — |
| Timers | 4x 16-bit, 2x 16-bit low-power, 2x watchdog, SysTick | — |
| RTC | Yes, with calendar and alarm | — |
| TRNG | True Random Number Generator (AES-256 capable) | — |
| Low-Power Modes | Shutdown ~30 nA, Standby ~120 nA, Stop with RTC ~420 nA | — |
| Internal Voltage Regulator | Integrated LDO and SMPS step-down | — |
| Backup Domain | VBAT pin for RTC and backup register retention | — |
| RoHS / REACH | ROHS3 compliant (per distributor data) | — |
| Product Type | — | 32-bit ultra-low-power microcontroller |
| Processor Core | — | Arm Cortex-M4 with FPU |
| Architecture | — | 32-bit RISC |
| Maximum CPU Frequency | — | 80 MHz |
| Peak Performance | — | 100 DMIPS |
| Flash Memory | — | 128 KB (128K × 8 bits) |
| Supply Voltage Range | — | 1.71 V to 3.6 V |
| VBAT Mode Current | — | 200 nA |
| Backup Registers | — | 32 × 32 bits |
| USB Interface | — | USB full-speed |
| LCD Controller | — | Integrated |
| External SMPS Support | — | Supported |
| Mounting Type | — | Surface mount |
| Power Management Technology | — | FlexPowerControl |
| RoHS Status | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |