TCA9554DWR vs TCA9554DWT Comparison

Detailed side-by-side comparison of TCA9554DWR by Texas Instruments and TCA9554DWT by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Texas Instruments
TCA9554DWR TCA9554DWR - 8-Bit I2C I/O Expander | Texas Instruments

TCA9554DWR - 8-Bit I2C I/O Expander | Texas Instruments

TCA9554DWR ✓ Active
Texas Instruments
TCA9554DWT TCA9554DWT - 8-Bit I/O Expander, 400 kHz | Texas Instruments

TCA9554DWT - 8-Bit I/O Expander, 400 kHz | Texas Instruments

TCA9554DWT ✓ Active

Specification Comparison

Parameter TCA9554DWR TCA9554DWT
Brand Texas Instruments Texas Instruments
Category Interface ICs Interface ICs
Lifecycle Status Active Active
Number of I/O Ports 8 ports —
I/O Direction Configurable input or output —
Interface Type I2C/SMBus —
Operating Supply Voltage Range 1.65 V to 5.5 V 1.65 V to 5.5 V
Maximum I2C Clock Frequency 400 kHz 400 kHz
Hardware Address Inputs 3 inputs, A0/A1/A2 —
Maximum Devices per I2C Bus 8 devices —
Interrupt Output 1 open-drain interrupt output Yes
Configuration Registers 8-bit input and output configuration registers Input, output, and polarity-inversion configuration registers
Input Pull-Up Capability Weak pull-ups —
Package 16-pin SOIC 16-pin SOIC
Mounting Type Surface mount Surface mount
Operating Temperature Range [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Supply Current [DATA_NEEDED: typical and maximum supply current] [DATA_NEEDED: typical and maximum supply current]
Input Logic Levels [DATA_NEEDED: input voltage thresholds] —
Output Logic Levels [DATA_NEEDED: output voltage levels] —
Output Drive Current [DATA_NEEDED: output sink and source current] —
Standby Current [DATA_NEEDED: standby current] —
Power-On Reset Device returns to default state when supply voltage is cycled —
RoHS Status unknown [DATA_NEEDED: RoHS status]
REACH Status unknown [DATA_NEEDED: REACH status]
Device Type — 8-bit I2C/SMBus I/O expander
Number of I/O Lines — 8 lines
Interface — I2C/SMBus
Supported Standard-Mode Clock Frequency — 100 kHz
Supported Fast-Mode Clock Frequency — 400 kHz
Number of Pins — 16 pins
General-Purpose Input Ports — 8 configurable input lines
General-Purpose Output Ports — 8 configurable output lines
Address Configuration Inputs — 3 address pins
Internal Pull-Up Capability — Weak pull-ups
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification status]

Datasheets & Resources

Browse All Products Create BOM Request Quote