TCAN330DCNR vs TCAN334DCNR Comparison

Detailed side-by-side comparison of TCAN330DCNR by Texas Instruments and TCAN334DCNR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Texas Instruments
TCAN330DCNR TCAN330DCNR - 3.3V 1Mbps CAN Transceiver | Texas Instruments

TCAN330DCNR - 3.3V 1Mbps CAN Transceiver | Texas Instruments

TCAN330DCNR ✓ Active

Specification Comparison

Parameter TCAN330DCNR TCAN334DCNR
Brand Texas Instruments Texas Instruments
Category Interface ICs Interface ICs
Lifecycle Status Active Active
Product Type 1/1 CAN bus transceiver CAN Transceiver (CAN FD, High-Speed)
Supply Voltage Range 3V to 3.6V —
Maximum CAN Data Rate 1Mbps —
Transmitter Count 1 —
Receiver Count 1 —
Low-Power Current 20uA —
Supply Current 60mA —
Operating Temperature Range -40°C to +125°C -40 C to +125 C
Package 8-pin SOT-23 (DCN) SOT-23-8 (DCN)
Pin Count 8 pins 8
Mounting Type Surface mount Surface Mount
Protection Features ESD protection, undervoltage protection, thermal shutdown protection, bus fault protection, short-circuit protection —
Operating Modes Low-power shutdown, standby, silent mode —
TXD Fault Feature TXD dominant timeout —
Interface Type Controller Area Network (CAN) —
Supply Voltage 3.3V —
RoHS Status Compliant Compliant
Device Marking 330 —
Exact Package Dimensions [DATA_NEEDED: package dimensions] —
CAN Transceiver Loop Delay [DATA_NEEDED: loop delay] —
Receiver Common-Mode Range [DATA_NEEDED: receiver common-mode range] —
Standby Current [DATA_NEEDED: standby current] —
Shutdown Current [DATA_NEEDED: shutdown current] —
ESD HBM withstand Voltage [DATA_NEEDED: ESD HBM withstand voltage] —
IEC ESD withstand Voltage [DATA_NEEDED: IEC ESD withstand voltage] —
Number of Drivers/Receivers — 1/1
Protocol — ISO 11898-1 (CAN / CAN FD)
Supply Voltage (VCC) — 3.0 V to 3.6 V (typical 3.3 V)
Data Rate (max) — 1 Mbps
CAN Bus Fault Tolerance — [DATA_NEEDED: exact bus fault voltage]
Low-Power Modes — Shutdown, Standby
Logic Input Compatibility — 3.3-V CMOS / TTL (5-V tolerant)
ESD Protection (HBM, bus pins) — [DATA_NEEDED: HBM rating]
Dominant Time-out — Yes (integrated)
Thermal Shutdown — Yes (integrated)
MSL Level — [DATA_NEEDED: MSL level]
Automotive Grade — No (industrial / consumer); see TCAN334-Q1 for AEC-Q100

Datasheets & Resources

Browse All Products Create BOM Request Quote