TJA1050 vs SN65HVD230DR Comparison
Detailed side-by-side comparison of TJA1050 by NXP Semiconductors and SN65HVD230DR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
SN65HVD230DR - 3.3V CAN Transceiver 1Mbps 8-SOIC | Texas Instruments
SN65HVD230DR ✓ ActiveSpecification Comparison
| Parameter | TJA1050 | SN65HVD230DR |
|---|---|---|
| Brand | NXP Semiconductors | Texas Instruments |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | NRND | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $0.84 | $0.94 |
| Product Type | High-speed CAN transceiver | CAN Bus Transceiver |
| Supply Voltage (VCC) | 4.75 V to 5.25 V | — |
| Maximum Data Rate | 1 Mbit/s | 1 Mbps |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Protocol | CAN 2.0A/B (classic CAN); controller-side interface only | CANbus (ISO 11898-2) |
| Bus Fault Protection | Short to battery, short to ground, thermal shutdown | — |
| Operating Temperature | -40 C to +150 C | -40C to +85C |
| Quiescent Current (Recessive) | [DATA_NEEDED: Iq typical] | — |
| Standby/Mode Pin | Yes (S pin, silent mode) | — |
| Differential Bus Voltage (Dominant) | [DATA_NEEDED: Vdiff_dom min/max] | — |
| Package | SOIC-8 (TJA1050T/CM,118) | 8-SOIC (D) |
| Mounting Type | Surface Mount | Surface Mount |
| MSL Level | 1 | — |
| RoHS Status | Compliant | Compliant |
| Automotive Grade | TJA1050T/CM variant referenced; AEC-Q100 status [DATA_NEEDED] | — |
| Supply Voltage | — | 3 V to 3.6 V (3.3 V nominal) |
| Driver/Receiver Configuration | — | Half-Duplex |
| Standby Mode Supply Current | — | 370 uA typical |
| ESD Protection (Bus Pins, HBM) | — | Exceeds 16 kV |
| Maximum Nodes on Bus | — | 120 nodes |
| Receiver Common-Mode Range | — | -2 V to 7 V |
| RS Pin Function | — | Slew-rate control via external resistor |