TL072CP vs LM258PG4 Comparison
Detailed side-by-side comparison of TL072CP by Texas Instruments and LM258PG4 by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
TL072CP - Dual JFET-Input Low-Noise Op Amp, 8-PDIP | Texas Instruments
TL072CP ✓ ActiveSpecification Comparison
| Parameter | TL072CP | LM258PG4 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Manufacturer | Texas Instruments | — |
| Part Status | Active | — |
| Amplifier Type | JFET-Input Operational Amplifier | General-purpose dual operational amplifier |
| Number of Circuits | 2 (Dual) | — |
| Slew Rate | 13 V/µs (typical) | 0.3 V/µs |
| Gain Bandwidth Product | 3 MHz (typical) | — |
| Input Bias Current | 30 pA (typical) | [DATA_NEEDED: input bias current] |
| Input Offset Voltage | 3 mV (typical, C grade) | [DATA_NEEDED: input offset voltage] |
| Input Noise Voltage Density | 18 nV/√Hz (typical at 1 kHz) | — |
| Total Harmonic Distortion | 0.003% (typical) | — |
| Supply Voltage Range (Dual) | ±3.5 V to ±18 V | — |
| Supply Voltage Range (Single) | 7 V to 36 V | — |
| Operating Temperature Range | 0°C to +70°C (C grade) | -25°C to +85°C |
| Package / Case | 8-PDIP (Plastic DIP, through-hole) | — |
| Mounting Type | Through Hole | Through-hole |
| Pin Count | 8 | — |
| Output Short-Circuit Protection | Yes | — |
| Internal Frequency Compensation | Yes | — |
| Latch-up Free Operation | Yes | — |
| RoHS Status | Compliant | [DATA_NEEDED: RoHS status] |
| Number of Channels | — | 2 channels |
| Maximum Supply Voltage | — | 30 V |
| Single-Supply Operating Range | — | 3 V to 32 V |
| Gain-Bandwidth Product | — | 700 kHz |
| Quiescent Current | — | 500 µA per channel |
| Frequency Compensation | — | Internally compensated |
| Package | — | 8-pin PDIP |
| Operating Voltage | — | 3 V to 32 V |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Output Current | — | [DATA_NEEDED: output current] |
| Noise Density | — | [DATA_NEEDED: noise density] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |