TL074CDR vs LM324ANG Comparison
Detailed side-by-side comparison of TL074CDR by Texas Instruments and LM324ANG by onsemi. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
TL074CDR - Quad Low-Noise JFET Op-Amp 14-SOIC | Texas Instruments
TL074CDR ✓ ActiveSpecification Comparison
| Parameter | TL074CDR | LM324ANG |
|---|---|---|
| Brand | Texas Instruments | onsemi |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Amplifier Type | JFET-Input Operational Amplifier | — |
| Number of Channels | 4 (Quad) | 4 channels |
| Gain Bandwidth Product (GBW) | 3 MHz (typical) | — |
| Slew Rate | 13 V/us (typical) | [DATA_NEEDED: slew rate] |
| Input Bias Current | 30 pA (typical) | [DATA_NEEDED: input bias current] |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage for TL074C grade] | 3 mV |
| Equivalent Input Noise Voltage | 18 nV/sqrt(Hz) at 1 kHz (typical) | — |
| Total Harmonic Distortion (THD) | <= 0.003% (typical) | — |
| Supply Voltage - Single Supply | 7 V to 36 V | — |
| Supply Voltage - Dual Supply | +/-3.5 V to +/-18 V | — |
| Operating Temperature | 0C to +70C | — |
| Output Current (per channel) | [DATA_NEEDED: short-circuit output current spec] | — |
| Package | 14-SOIC (D) 3.90 mm | 14-PDIP |
| Mounting Type | Surface Mount | Through-hole |
| MSL Level | 1 (unlimited) | — |
| RoHS Status | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free | Yes | — |
| Frequency Compensation | Internal (unity-gain stable) | — |
| Device Type | — | Quad operational amplifier |
| Supply Voltage Range | — | 3 V to 32 V |
| Common-Mode Rejection Ratio | — | 65 dB minimum |
| Gain-Bandwidth Product | — | 1 MHz |
| Input Type | — | True differential inputs |
| Operating Temperature Grade | — | Commercial temperature grade |
| Number of Pins | — | 14 pins |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Output Current | — | [DATA_NEEDED: output current] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode range] |
| Output Swing | — | [DATA_NEEDED: output swing] |
| Supply Current | — | [DATA_NEEDED: supply current] |