TLE9104SHXUMA1 vs ITS4200SMEPHUMA1 Comparison
Detailed side-by-side comparison of TLE9104SHXUMA1 by Infineon and ITS4200SMEPHUMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | TLE9104SHXUMA1 | ITS4200SMEPHUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Product Type | Multi-Channel Low-Side Power Switch | Smart High-Side Power Switch |
| Number of Channels | 4 | 1 |
| Load Current per Channel | 3 A (continuous) | — |
| Topology | 1:1 N-Channel Low-Side Switch | High-Side, N-Channel MOSFET |
| Supply Voltage Range (VDD) | 4.5 V to 28 V | — |
| Logic Reference (VIO) | 3.3 V / 5 V compatible | — |
| Communication Interface | 16-bit SPI | — |
| R_DS(on) per Channel | [DATA_NEEDED: typical R_DS(on) in mohm] | — |
| Operating Temperature | -40 °C to +150 °C (junction) | -40C to +125C (automotive grade) |
| Package | PG-DSO-20-88 (20-pin BFSOP with exposed pad) | PG-SOT223-4 (4-pin, 3+Tab) |
| Mounting Type | Surface Mount | Surface Mount |
| Protection Features | Over-current, Over-temperature, Over-load, short-to-ground, open-load detection | — |
| Diagnostic Output | SPI status registers (per-channel fault flags) | — |
| Automotive Qualification | AEC-Q100 qualified (automotive grade) | — |
| MSL Level | MSL3 (per JEDEC J-STD-020) | — |
| RoHS / Lead-Free | RoHS compliant, lead-free | — |
| Reset Pin (RESN) | Active-low with configurable reset duration | — |
| Continuous Load Current | — | 1.4 A |
| On-State Resistance (Rdson) | — | 150 milliohm (typical) |
| Supply Voltage Range | — | -3 V to 45 V |
| Overvoltage Protection | — | Yes (load-dump resilient) |
| Undervoltage Shutdown | — | Yes |
| Short Circuit Protection | — | Yes |
| Thermal Shutdown | — | Yes (with auto-restart) |
| Current Limitation | — | Yes |
| Input Logic Type | — | Current-Controlled, CMOS-compatible |
| Inductive Load Switching | — | Yes |
| AEC-Q100 Qualification | — | Yes |
| Technology | — | Smart Power (vertical N-DMOS + charge pump + CMOS logic) |
| RoHS Status | — | Compliant |