TLV2620ID vs TLV2620IP Comparison
Detailed side-by-side comparison of TLV2620ID by Texas Instruments and TLV2620IP by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
TLV2620IP - 11 MHz RRO CMOS Op Amp with Shutdown | Texas Instruments
TLV2620IP ✓ ActiveSpecification Comparison
| Parameter | TLV2620ID | TLV2620IP |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Amplifier Type | Single operational amplifier | Single CMOS operational amplifier |
| Gain-Bandwidth Product | 11 MHz | — |
| Maximum Supply Voltage | 5.5 V | 5.5 V |
| Output Topology | Rail-to-rail output | — |
| Shutdown Function | Yes | — |
| Process Technology | CMOS | — |
| Number of Channels | 1 channel | — |
| Input Offset Voltage | 4500 uV maximum | [DATA_NEEDED: input offset voltage] |
| Supply Current | 800 uA per channel | — |
| Operating Temperature Range | -40 C to +125 C | [DATA_NEEDED: operating temperature range] |
| Package | 8-pin SOIC | 8-PDIP (0.300 inch, 7.62 mm pitch) |
| Mounting Type | Surface mount | Through hole |
| Number of Inputs | 2 inputs | — |
| Number of Outputs | 1 output | — |
| Input Common-Mode Range | [DATA_NEEDED: Input common-mode range] | — |
| Output Voltage Range | [DATA_NEEDED: Output voltage range] | — |
| Slew Rate | [DATA_NEEDED: Slew rate] | 9.5 V/us |
| Rail-to-Rail Input | [DATA_NEEDED: Rail-to-Rail input configuration] | — |
| Open-Loop Gain | [DATA_NEEDED: Open-loop gain] | — |
| Input Bias Current | [DATA_NEEDED: Input bias current] | [DATA_NEEDED: input bias current] |
| Shutdown Supply Current | [DATA_NEEDED: Shutdown supply current] | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | Compliant (RoHS) - manufacturer product page |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Number of Amplifiers | — | 1 |
| Minimum Supply Voltage | — | [DATA_NEEDED: minimum operating supply voltage] |
| Gain Bandwidth Product | — | 11 MHz |
| Input Common Mode Range | — | Rail-to-rail input |
| Output Swing | — | Rail-to-rail output |
| Shutdown Control | — | Yes, dedicated shutdown pin |
| Quiescent Current | — | [DATA_NEEDED: quiescent/supply current per amplifier] |
| Equivalent Input Noise Density | — | [DATA_NEEDED: input noise density] |
| Common Mode Rejection Ratio | — | [DATA_NEEDED: CMRR] |
| Open Loop Gain | — | [DATA_NEEDED: open-loop gain] |