TPS2375PW-1 vs TPS2370PW Comparison
Detailed side-by-side comparison of TPS2375PW-1 by Texas Instruments and TPS2370PW by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
TPS2375PW-1 - IEEE 802.3af PoE PD Controller, 100V | Texas Instruments
TPS2375PW-1 ✓ ActiveTexas Instruments
TPS2370PW - IEEE 802.3af PoE PD Interface, 8-TSSOP | Texas Instruments
TPS2370PW ✓ ActiveSpecification Comparison
| Parameter | TPS2375PW-1 | TPS2370PW |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Function | IEEE 802.3af PoE Powered Device (PD) Controller with Auto-Retry | IEEE 802.3af Power Interface Switch for PoE Powered Devices |
| PoE Standard | IEEE 802.3af | — |
| Number of Channels | 1 | — |
| Input Voltage Range | 0 V to 57 V | — |
| Absolute Maximum Rating | 100 V (second-generation silicon) | — |
| Max Power Class Supported | Class 3, 12.95 W at PD (13 W class rating) | — |
| Fault Recovery | Auto-retry after current-limit fault | — |
| Power Good Output | True open-drain (PGB) | — |
| Internal Sense Element | 0.58 ohm integrated | — |
| Threshold Offset | 1.5 V offset from IEEE 802.3af limits (diode-bridge compensation) | — |
| Operating Temperature | -40C to +85C | — |
| Package | TSSOP-8 (PW) | 8-pin TSSOP (PW) |
| Mounting Type | Surface Mount | Surface Mount |
| Quiescent Current | [DATA_NEEDED: quiescent current] | — |
| On-Resistance (External FET dependent) | [DATA_NEEDED: Rds on] | — |
| RoHS Status | Compliant | Compliant |
| Standards Compliance | — | IEEE 802.3af (PoE Type 1) |
| Input Voltage Range (VCC) | — | 0 V to 67 V (operating) |
| Maximum Switch Voltage (VPORT to GND) | — | 100 V |
| Internal Pass FET RDS(on) | — | 0.3 ohm |
| Detection Signature | — | 25 kohm standard (802.3af) |
| Classification Classes | — | Class 0 through Class 4 |
| Inrush Current Limiting | — | Programmable via external components |
| Operating Temperature Range | — | -40 C to +85 C |
| MSL Level | — | 1 (unlimited floor life at <30 C / 85 % RH) |
| Power Good Output | — | Open-drain, active low |
| Enable Logic | — | Active-high (PG output gates downstream DC/DC) |
| Lead-Free Finish | — | Yes (NiPdAu) |