TUSB213RGYR vs TUSB213RGYT Comparison
Detailed side-by-side comparison of TUSB213RGYR by Texas Instruments and TUSB213RGYT by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
TUSB213RGYR - USB 2.0 HS Redriver with DC Boost | Texas Instruments
TUSB213RGYR ✓ ActiveTexas Instruments
TUSB213RGYT - USB 2.0 HS Signal Conditioner | Texas Instruments
TUSB213RGYT ✓ ActiveSpecification Comparison
| Parameter | TUSB213RGYR | TUSB213RGYT |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | USB Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Product Type | USB 2.0 high-speed redriver with DC boost | USB 2.0 high-speed signal conditioner with DC boost |
| USB Compatibility | USB 2.0, OTG 2.0, and BC 1.2 | USB 2.0 |
| Maximum USB Data Rate | 480 Mbit/s | — |
| High-Speed Channel Count | 1 channel | — |
| Supported Signaling Modes | Low-speed, full-speed, and high-speed | — |
| Supply Voltage Range | 4.4 V to 5.5 V | 4.4 V to 5.5 V |
| AC Boost Settings | 4 selectable settings | 4 selectable settings |
| Configuration Interface | Pin strap or I2C | Pin strap or I2C |
| Maximum Pre-Channel Cable Length | 5 m | 5 m |
| Maximum Post-Channel Cable Length | 2 m | 2 m |
| Data Pair Routing | Interchangeable D1P/M and D2P/M | — |
| Host and Device Operation | Host-agnostic and device-agnostic | Host-agnostic and device-agnostic |
| Daisy-Chain Support | Yes | Supported |
| Low-Speed and Full-Speed Behavior | Automatically bypassed | — |
| Power Management Features | Ultra-low USB disconnect and shutdown | — |
| Package | 14-pin VQFN (RGY), 3.5 mm x 3.5 mm | — |
| Mounting Type | Surface mount | Surface mount |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS Status | RoHS3 compliant | [DATA_NEEDED: RoHS compliance status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| OTG Compatibility | — | USB OTG 2.0 |
| Battery Charging Compatibility | — | Battery Charging 1.2 |
| Supported USB Signaling | — | Low-speed, full-speed, and high-speed |
| D1P/M and D2P/M Support | — | Interchangeable |
| Package Type | — | 14-pin VQFN (RGY) |
| Package Dimensions | — | 3.5 mm x 3.5 mm |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |