TUSB213RGYR vs TUSB215RGYR Comparison
Detailed side-by-side comparison of TUSB213RGYR by Texas Instruments and TUSB215RGYR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
TUSB213RGYR - USB 2.0 HS Redriver with DC Boost | Texas Instruments
TUSB213RGYR ✓ ActiveTexas Instruments
TUSB215RGYR - USB 2.0 HS Signal Conditioner | Texas Instruments
TUSB215RGYR ✓ ActiveSpecification Comparison
| Parameter | TUSB213RGYR | TUSB215RGYR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | USB Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Product Type | USB 2.0 high-speed redriver with DC boost | USB 2.0 high-speed signal conditioner |
| USB Compatibility | USB 2.0, OTG 2.0, and BC 1.2 | — |
| Maximum USB Data Rate | 480 Mbit/s | — |
| High-Speed Channel Count | 1 channel | — |
| Supported Signaling Modes | Low-speed, full-speed, and high-speed | — |
| Supply Voltage Range | 4.4 V to 5.5 V | — |
| AC Boost Settings | 4 selectable settings | — |
| Configuration Interface | Pin strap or I2C | — |
| Maximum Pre-Channel Cable Length | 5 m | — |
| Maximum Post-Channel Cable Length | 2 m | — |
| Data Pair Routing | Interchangeable D1P/M and D2P/M | — |
| Host and Device Operation | Host-agnostic and device-agnostic | — |
| Daisy-Chain Support | Yes | — |
| Low-Speed and Full-Speed Behavior | Automatically bypassed | — |
| Power Management Features | Ultra-low USB disconnect and shutdown | — |
| Package | 14-pin VQFN (RGY), 3.5 mm x 3.5 mm | — |
| Mounting Type | Surface mount | Surface mount |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | — |
| RoHS Status | RoHS3 compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | [DATA_NEEDED: AEC-Q100 qualification] |
| USB Data Rate | — | USB 2.0 high speed |
| Supply Voltage | — | 5 V |
| DC Boost | — | Supported |
| Charging Function | — | Integrated CDP |
| VBUS Supply | — | Supported |
| Differential Impedance Target | — | 90 ohm |
| Package Type | — | VQFN-14 (RGY) |
| Package Dimensions | — | 3.5 mm x 3.5 mm |
| Pin Count | — | 14 pins |
| Exposed Pad | — | Present |
| Operating Temperature | — | 0 °C to 70 °C |
| Signal Processing | — | Compensation for ISI signal loss |
| Compliance Objective | — | Help passing USB electrical compliance tests |
| REACH Status | — | [DATA_NEEDED: REACH status] |