VND7E050AJTR vs VND7050AJTR Comparison
Detailed side-by-side comparison of VND7E050AJTR by STMicroelectronics and VND7050AJTR by STMicroelectronics. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
STMicroelectronics
VND7E050AJTR - Dual 50A High-Side Driver | STMicroelectronics
VND7E050AJTR ✓ ActiveSTMicroelectronics
VND7050AJTR - Dual 70mOhm High-Side Driver | STMicroelectronics
VND7050AJTR ✓ ActiveSpecification Comparison
| Parameter | VND7E050AJTR | VND7050AJTR |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Category | Motor Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $1.68 | $2.19 |
| Topology | Dual-channel high-side driver (HSD) | — |
| Technology | STMicroelectronics VIPower M0-7 | — |
| Number of Channels | 2 | 2 |
| Continuous Load Current per Channel | 50 A | — |
| Operating Voltage (VCC) | 4 V to 28 V (automotive 12 V nominal) | — |
| Logic Input Compatibility | 3 V and 5 V CMOS | — |
| Standby Current | [DATA_NEEDED: standby current value] | 0.5 uA (typical) |
| On-State Resistance (Ron) per Channel | [DATA_NEEDED: Ron value] | — |
| Current Sense Output | Analog multiplexed CS pin (load current, VCC, temperature) | — |
| Fault Reset (FaultRST) | Active-low CMOS-compatible input | — |
| Protections | Load current limitation, overload active power limitation, overtemperature shutdown with configurable latch-off, reverse battery, load dump | — |
| Diagnostics | Open-load, short-to-ground, short-to-VCC, overload, overtemperature | — |
| Package | PowerSSO-16 (16-pin exposed-pad) | PowerSSO-16 |
| Operating Temperature | -40 C to +150 C junction | — |
| Automotive Qualification | AEC-Q100 targeted (VND7E050AJ family automotive grade) | — |
| Mounting Type | Surface Mount | Surface Mount |
| RoHS Status | Compliant | Compliant |
| Output Type | — | High-Side |
| Supply Voltage Range | — | 4 V to 28 V |
| Continuous Output Current per Channel | — | 9 A |
| Maximum Current Limitation | — | 14 A (typical) |
| On-State Resistance (RDS(on)) | — | 70 mOhm (typical) |
| Supply Current (Active) | — | 5 mA |
| Interface | — | 3 V and 5 V CMOS compatible |
| Diagnostic Output | — | Open-drain, MultiSense analog feedback |
| Protection Features | — | Overcurrent, overtemperature, short-circuit, overvoltage clamping, reverse battery (with external resistor) |
| Thermal Resistance, Junction-to-Ambient | — | 40 C/W |
| Operating Temperature Range | — | -40C to +150C |
| AEC-Q100 Qualified | — | Yes |