FPGA & CPLD
Produkte (6666)
A3PE600L-FGG484M - ProASIC3EL Flash FPGA 600K | Microchip
The Microchip Technology (Microsemi/Actel) A3PE600L-FGG484M is a low-power ProASIC3EL flash-based FPGA with approximately 600K system gates (7K logic elements per distributor listings), 270 user I/Os, and 110592 bits of user flash memory, housed in a 484-ball FBGA (484-BGA) package. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing a fabric of programmable logic blocks and interconnects that designers configure to implement custom digital circuits. Unlike SRAM-based FPGAs, the ProASIC3 family stores its configuration in nonvolatile on-chip flash, so the device powers up instantly as a single-chip solution with no external boot PROM - a key advantage in the power-management and programmable-logic hierarchy for cost- and board-space-sensitive designs. Key features include a 1.2 V to 1.5 V core voltage supporting low-power operation, flash-based LiveSystem ProASIC3EL architecture fabricated in 130 nm CMOS process technology, reprogrammability with secure configuration storage, and abundant embedded features suited to industrial and defense designs. Datasheet records for this military-temperature family indicate each device is tested from -55 C to +125 C and is not susceptible to neutron-induced configuration loss, a radiation-tolerance attribute valued in aerospace programs. Technically, the ProASIC3EL fabric uses fine-grained Versatile logic elements (VersaTiles) with distributed flash switches that also serve as user-visible memory, eliminating configuration-scratch vulnerability inherent to SRAM FPGAs. The low static power of the flash switch technology, combined with the L-grade low-power option, reduces standby current compared with SRAM equivalents of similar density. Typical applications include military and avionics systems, industrial automation controllers, communications infrastructure glue logic and bridge functions, and secure single-chip designs where configuration bitstream protection matters. For design, confirm supply sequencing of the 1.2 V/1.5 V core and 2.5 V/3.3 V I/O banks and use Microchip Libero SoC design suite for synthesis and programming file generation. This page synthesizes distributor pricing, drop-in alternatives such as the A3PE600L-FG484M, and practical design notes not found in the manufacturer datasheet alone.
A42MX09-1PQG160 - 14K Gate MX FPGA 160-PQFP | Microchip
The Microchip Technology (Microsemi/Actel) A42MX09-1PQG160 is a 14,000-system-gate FPGA from the 42MX family, implemented in 0.45 um CMOS and packaged in a 160-pin PQFP (BQFP) with 101 user I/O. It provides 684 logic cells and supports system clock rates up to 224 MHz, operating from a flexible 3.3V/5V supply environment. The MX family is a class of antifuse-based, one-time-programmable (OTP) FPGAs designed as a reliable single-chip ASIC alternative. Unlike SRAM FPGAs, antifuse devices retain their configuration permanently, require no external boot flash, and are inherently immune to configuration-bit upsets - which is why MX devices remain popular in legacy industrial, defense, and high-reliability systems. Key features include a 5.0V-tolerant architecture suited for legacy PLD consolidation, 14K system gates in a low-cost package, deterministic interconnect delays typical of antifuse routing, and JTAG boundary-scan testing support. The -1 speed grade balances performance and cost, while the 160-PQFP package offers gull-wing leads compatible with standard surface-mount assembly. Architecturally, the 42MX combines combinatorial and sequential logic modules on a segmented antifuse routing fabric, giving predictable timing that simplifies closure on legacy designs. The device is programmed once via the Microchip (Actel) programming flow and requires no configuration PROM, reducing BOM count and improving boot reliability. Typical applications include legacy PLD/ASIC replacement, industrial control glue logic, military and avionics upgrades, and bridge/interface functions in 5V legacy systems. The device is especially valued for obsolescence-driven redesigns where a proven, non-volatile fabric is required. Design consideration: because the MX fabric is OTP, exhaustively verify the design in simulation and on a -3 (faster) or lower-density evaluation device before committing production units - there is no reprogramming.
A42MX09-1PQG160M - 14K Gate MX FPGA, 160-PQFP | Microchip
The A42MX09-1PQG160M is a Microsemi (now Microchip Technology) MX family FPGA offering 14K system gates, 336 logic cells, and 101 user I/O in a 160-pin PQFP (BQFP) package. Fabricated on a 0.45 um CMOS process, the device supports both 3.3V and 5V operation and delivers toggle rates of 148 MHz / 247 MHz, making it a cost-effective, single-chip ASIC alternative for high-volume systems. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing a fabric of configurable logic blocks and programmable interconnects that the designer configures after manufacturing. Within the programmable logic hierarchy, the MX family sits under Actel/Microsemi antifuse FPGAs -> field-programmable gate arrays -> programmable logic ICs. Antifuse-based MX devices are one-time programmable, giving them inherent resistance to configuration corruption (SEU robustness) and instant-on behavior with no external configuration memory. Key features include a flexible 5.0V-tolerant architecture, dual 3.3V/5V supply operation for legacy system integration, 14K system gates (684 logic cells per Microchip USA data), and a lead-free, RoHS-aligned 160-BQFP surface-mount package. The PQFP package with 0.65 mm terminal pitch (JESD-30 S-PQFP-G160) simplifies inspection and rework compared with fine-pitch BGAs. The MX architecture combines combinational and sequential logic modules with rich local routing, providing predictable timing for glue logic consolidation, legacy PLD integration, and control-plane functions. The -1 speed grade supports clock frequencies up to the 148 MHz/247 MHz ratings noted in distributor and manufacturer data. Typical applications include legacy design continuation for military/industrial systems, integration of multiple discrete PLDs into a single low-cost chip, bus interface and address decoding, and industrial control where 5V compatibility is still required. Design consideration: because MX antifuse devices are one-time programmable, verify the full design in simulation and, where possible, prototype on a larger MX device before programming production units. Pricing referenced is as of 2026-08-30.
A42MX09-1TQG176M - MX FPGA 14K Gates 104 I/O | Microchip
The Microchip Technology A42MX09-1TQG176M is a field-programmable gate array (FPGA) from the MX family, offering 14,000 system gates and 104 user I/Os in a 176-pin LQFP package. It operates with a flexible 5.0 V architecture and supports 3.3 V/5 V I/O, making it a reliable single-chip ASIC alternative for integrating legacy PLDs into a low-cost, high-volume platform. An FPGA (Field-Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing—hence "field-programmable." FPGAs are part of the programmable logic device (PLD) family, which also includes CPLDs and SPLDs. They consist of an array of programmable logic blocks and a hierarchy of reconfigurable interconnects that allow the blocks to be wired together. FPGAs sit between ASICs (application-specific integrated circuits) and microprocessors in the design hierarchy, offering the flexibility of software with the parallelism of hardware. The MX family is specifically optimized for 5.0 V systems, providing an efficient bridge for designs migrating from older PLDs. Key features of the A42MX09-1TQG176M include 14,000 system gates, 104 user I/Os, and a 176-pin LQFP package with 0.5 mm pitch. The device supports both 3.3 V and 5 V I/O standards, enabling mixed-voltage system integration. It offers a maximum operating frequency of 247 MHz (as per FPGAkey data), with a 0.45 µm technology node. The MX architecture provides predictable timing, low power consumption, and high reliability, making it suitable for industrial and automotive applications where deterministic performance is critical. Technically, the A42MX09 is built on a 0.45 µm CMOS process and features a sea-of-modules architecture with dedicated routing resources. It includes 336 logic modules (cells) and supports up to 104 user I/Os. The device is available in both commercial and industrial temperature grades, with the "M" suffix indicating military temperature range (-55°C to +125°C). The 176-pin LQFP package provides a compact footprint (20x20 mm) with exposed pad for improved thermal performance. Typical applications include bus interfaces, memory controllers, glue logic consolidation, and protocol bridging in industrial control, automotive electronics, and communications equipment. The 5.0 V architecture makes it ideal for interfacing with legacy 5 V logic while providing a path to lower-voltage cores. Its high I/O count and gate density allow integration of multiple discrete PLDs into a single device, reducing board space and BOM cost. When designing with this FPGA, consider the I/O bank voltage requirements and ensure proper decoupling of the VCC and VCCIO pins. The device supports JTAG programming and in-system reprogrammability, simplifying design iterations. For power-sensitive applications, the MX family offers low static power consumption, but dynamic power scales with switching activity—use clock gating where possible. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing a comprehensive resource for engineers evaluating the A42MX09-1TQG176M for their next design.
A42MX09-2PLG84I - 14K Gate 5V FPGA 84-PLCC | Microchip
The Microchip Technology (Microsemi) A42MX09-2PLG84I is an MX family Field Programmable Gate Array delivering 14,000 system gates with 72 user-programmable I/O pins in an 84-pin PLCC (J-Lead) surface-mount package. The device operates from dual supplies (3V to 3.6V and 4.5V to 5.5V) across the industrial temperature range of -40C to +85C. An FPGA (Field-Programmable Gate Array) is a type of programmable logic IC that implements custom digital circuits through a matrix of configurable logic blocks and programmable interconnects. Within the programmable logic hierarchy, the MX family sits as a cost-effective, single-chip ASIC alternative positioned below high-end FPGA families, making it a platform for consolidating legacy PLDs into one low-cost device. Key features include 250 MHz system performance, 5.6 ns clock-to-out, 5 ns dual-port SRAM access, up to 2.5 kbits of configurable dual-port SRAM, and fast wide-decode circuitry. The -2 speed grade balances performance and cost, and the 5.0V-tolerant architecture uniquely suits 5V legacy bus integration where modern low-voltage FPGAs require level shifters. The MX architecture uses a 0.45 um process with act-three antifuse-style and reprogrammable configuration options across the family, offering high volume production reliability with no configuration PROM required for certain family members. Designers typically use Libero SoC design tools from Microchip for synthesis and place-and-route. Typical applications include industrial control, legacy PLD consolidation, glue-logic integration, military/industrial upgrade programs, and 5V bus bridging in mixed-voltage systems. The industrial -40C to +85C rating supports harsh environments. Design consideration: verify 5V/3.3V dual-rail sequencing on the PCB and confirm I/O bank voltage assignment early, since the 84-PLCC footprint offers limited I/O for late design changes.
A42MX09-2PQG100 - 14K Gate FPGA, 83 I/O | Microchip
The Microchip Technology A42MX09-2PQG100 is a field-programmable gate array (FPGA) from the MX family, offering 14,000 system gates and 83 user I/O pins in a 100-pin PQFP (PQG100) package. It operates from a 5.0 V supply and provides a single-chip ASIC alternative for integrating legacy PLDs. The device features 2.5 kbits of configurable dual-port SRAM, fast wide-decode circuitry, and up to 202 user-programmable I/O pins across the family. With a clock-to-out time of 5.6 ns and 250 MHz performance, it suits high-speed logic integration. An FPGA is a semiconductor device containing programmable logic blocks and interconnects that can be configured after manufacturing to implement custom digital circuits. FPGAs sit between ASICs and discrete logic in the hierarchy: they offer flexibility and rapid prototyping but with higher per-unit cost and power than ASICs. The MX family is optimized for 5.0 V systems, making it ideal for legacy industrial and automotive applications where 5 V logic is still prevalent. Key features include 14,000 system gates, 83 user I/O pins, 2.5 kbits dual-port SRAM, and 5.6 ns clock-to-out. The device supports 5.0 V operation and is lead-free (RoHS compliant). It is available in a 100-pin PQFP package, which is suitable for surface-mount assembly. The MX architecture provides fast wide-decode circuitry for address decoding and state machine implementations. Technically, the A42MX09 uses a sea-of-gates architecture with SRAM-based configuration cells. It offers 250 MHz internal performance and 100 MHz FIFO operation. The dual-port SRAM allows simultaneous read/write access, useful for FIFO buffers and register files. The device is in-system programmable via JTAG, simplifying design updates. Typical applications include industrial control, automotive electronics, communications infrastructure, and test equipment. Its 5.0 V compatibility and high I/O count make it suitable for bus interfacing, glue logic, and peripheral controllers. The 83 I/O pins can interface with 5 V TTL/CMOS logic directly. When designing with this FPGA, ensure proper decoupling of the 5.0 V supply and follow the recommended power-up sequence. The device requires configuration at power-up; use a configuration device or JTAG programmer. Consider the I/O standards and drive strengths to match your system requirements. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a comprehensive resource for sourcing and implementing the A42MX09-2PQG100.
A42MX09-2PQG100I - 14K Gate FPGA 83 I/O PQFP-100 | Microchip
The Microchip Technology (Microsemi) A42MX09-2PQG100I is an MX family FPGA providing 14,000 system gates (336 logic cells) with 83 user I/Os in a 100-pin PQFP (BQFP) package, fabricated on a 0.45um process and rated for the industrial temperature range (-40C to +85C) with the speed grade -2. An FPGA (Field-Programmable Gate Array) is a semiconductor device that implements digital logic through programmable interconnect and configurable logic blocks, sitting within the broader hierarchy of programmable logic devices: SPLD -> CPLD -> FPGA -> programmable SoC. The Microchip MX family is specifically positioned as a reliable, single-chip ASIC alternative for high-volume, cost-sensitive designs and legacy PLD integration. Key features include dual 3.3V/5V supply operation, 161 MHz system performance (269 MHz internal decode frequency for the 42MX family), and the robust antifuse-based 5.0V-tolerant architecture. The 5V-tolerant I/O structure makes this device especially attractive for interfacing with legacy 5V TTL logic systems, industrial buses, and mixed-voltage boards without level shifters. Technically, the MX family uses Actel-heritage antifuse programming technology, which provides non-volatile, single-event-upset-resistant configuration - unlike SRAM FPGAs, the configuration is permanent and immune to configuration SEUs, a key advantage in industrial and aerospace-adjacent applications. Design entry and programming use Microchip (Microsemi) Libero SoC design tools. Typical applications include glue-logic consolidation, industrial control and motor interface boards, legacy PLD migration, 5V bus bridging, and high-volume embedded systems where ASIC NRE cost is unjustified. Design consideration: verify I/O banking and supply sequencing in the datasheet (DS2316), and confirm speed grade -2 timing closure with Libero timing reports before tape-out of the PCB footprint.
A42MX09-2PQG160 - 14K Gate 5V FPGA, 160-BQFP | Microchip
The Microchip Technology A42MX09-2PQG160 is a 14,000-system-gate FPGA from the Actel/Microsemi MX family, built on a 5.0 V antifuse CMOS architecture with 336 Configurable Logic Blocks (CLBs), 101 user I/O, and a maximum clock frequency of 146.3 MHz in a 160-pin BQFP (PQFP-160, 28x28 mm) surface-mount package. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing configurable logic blocks and programmable interconnects that the designer wires together after manufacturing, sitting in the programmable-logic hierarchy between CPLDs and full ASICs. The MX family is distinctive because it uses antifuse programming: one-time programmable interconnect that is non-volatile, instantly live at power-up, and inherently resistant to configuration corruption, making it a reliable single-chip ASIC alternative for high-volume, cost-sensitive designs. Key differentiating features include the 5.0 V tolerant architecture that lets the MX directly interface with legacy 5V TTL/PLD systems without level shifting, the secure antifuse fabric that cannot be read back or re-programmed in the field, and speed-grade -2 timing supporting 146.3 MHz operation. The 101 available user I/O across the 160-pin BQFP gives ample connectivity for bus interfaces, glue logic consolidation, and legacy PLD integration. Technically, the MX fabric combines sequential modules, combinational modules, and decode modules with a routing architecture optimized for high logic utilization. Being one-time programmable, the device requires no configuration PROM and boots in microseconds, unlike SRAM FPGAs. Typical applications include consolidation of legacy 5V PLD/gate-array designs, industrial control, military/aerospace systems requiring configuration immunity, and high-reliability bridge logic. Designers should note that antifuse programming is permanent: thoroughly verify the design in simulation and with device programming services before committing production units. Power budgeting must account for the 5V core supply typical of this generation. This page adds value beyond the manufacturer datasheet by synthesizing distributor pricing, same-package drop-in speed-grade variants, application guidance, and design notes in one AI-citable reference. Pricing shown is as of 2026-08-30.
A42MX09-2PQG160I - 14K Gate FPGA, 161MHz | Microchip Technology
The Microchip Technology A42MX09-2PQG160I is a field-programmable gate array (FPGA) from the 42MX family, offering 14,000 equivalent system gates and 336 logic modules. It operates at a maximum internal frequency of 161 MHz (269 MHz for external applications) and is fabricated using 0.45-micron CMOS technology. The device supports both 3.3V and 5V I/O, making it versatile for mixed-voltage systems, and is housed in a 160-pin PQFP (Plastic Quad Flat Pack) package with a 0.65mm terminal pitch. An FPGA is an integrated circuit that can be programmed after manufacturing to implement custom digital logic functions. Unlike fixed-function ASICs, FPGAs offer reconfigurability, allowing designers to iterate on designs without the cost and lead time of custom silicon. The 42MX family is positioned as a cost-effective, single-chip alternative to legacy PLDs and ASICs, providing high performance and low power consumption for high-volume applications. Key features of the A42MX09-2PQG160I include 101 user I/O pins, a wide operating voltage range of 3.0V to 5.5V, and support for both 3.3V and 5V I/O standards. The device also features 336 logic modules, 14,000 equivalent gates, and a maximum clock frequency of 161 MHz. Its 0.45-micron CMOS technology ensures low power dissipation, making it suitable for battery-powered and thermally constrained designs. Technically, the 42MX family uses a sea-of-modules architecture with a flexible routing fabric, enabling high logic utilization and predictable timing. The device includes dedicated clock networks and supports various I/O standards, including LVTTL, LVCMOS, and PCI. The A42MX09-2PQG160I is designed for reliable operation across the industrial temperature range of -40°C to +85°C, with a junction temperature range of -40°C to +125°C. Typical applications include industrial control systems, automotive electronics, communications infrastructure, and consumer electronics. Its 5V compatibility makes it ideal for interfacing with legacy 5V logic, while its 3.3V operation enables low-power designs. The device is also used in prototyping and ASIC replacement, where its reprogrammability accelerates time-to-market. When designing with this FPGA, consider the power supply decoupling: place 0.1uF and 10uF capacitors close to each VCC and GND pin to minimize noise. Additionally, ensure proper configuration of the device using the appropriate programming interface, as the A42MX09-2PQG160I supports both JTAG and serial programming. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing a comprehensive resource for engineers evaluating the A42MX09-2PQG160I.
A42MX09-2TQG176 - 14K Gate 5V FPGA 176-TQFP | Microchip
The Microchip Technology A42MX09-2TQG176 is a member of the Actel-origin MX FPGA family, offering 14,000 system gates in a 176-pin Thin Quad Flat Pack (TQFP, 24x24 mm) surface-mount package with 104 user I/O. It operates from a dual supply of 3.0V-3.6V (core/support) and 4.75V-5.25V (I/O), and is rated for commercial 0C to +70C ambient operation. Speed grade -2 denotes the faster timing bin of the family. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing a fabric of programmable logic blocks and interconnects that designers configure to implement custom digital circuits. FPGAs sit between fixed-function ASICs and microprocessors in the programmable logic hierarchy. The MX family is distinctive for its one-time-programmable antifuse technology, which is non-volatile, inherently secure, and immune to configuration readback. Key features include the efficient 5.0V-tolerant architecture that makes MX an ideal single-chip ASIC alternative and a low-cost platform for integrating legacy PLD designs into one device. With 336 logic cells, up to 161 MHz/269 MHz internal performance paths, and 0.45 um antifuse process technology, the device suits high-volume, cost-sensitive production where solder-down certainty and design security matter more than reprogrammability. Architecturally, the MX fabric combines combinational and sequential modules with pervasive routing, delivering predictable, ASIC-like timing. Because the antifuse configuration is permanent, there is no need for an external boot flash, reducing BOM cost, board area, and configuration-time failure modes compared to SRAM FPGAs. Typical applications include industrial control, legacy 5V system redesigns, military/aerospace program derivatives of PLD-based designs, glue logic consolidation, and high-reliability embedded systems. Design consideration: because MX devices are one-time-programmable, verify your design thoroughly in simulation and with device programming before production commit; plan a 10-week manufacturer lead time when scheduling builds (as of 2026-08-30).
A42MX09-2TQG176I - 14K System Gates FPGA | Microchip Technology
The Microchip Technology A42MX09-2TQG176I is a 14K system gate FPGA from the 42MX family, featuring 336 logic cells, 104 user I/O pins, and a 176-pin LQFP (24x24x1.4mm) package. It operates with a 3.3V/5V supply and is built on a 0.45um technology, offering a maximum clock frequency of 161MHz system / 269MHz max. This industrial-grade device (-40C to +85C) is RoHS compliant and lead-free, with a tray packaging format. What is an FPGA? A Field Programmable Gate Array is a semiconductor device that can be configured by the customer after manufacturing. It consists of a matrix of configurable logic blocks (CLBs) and programmable interconnects, allowing implementation of digital logic circuits. FPGAs bridge the gap between ASICs and programmable logic devices, providing reconfigurability and rapid prototyping. The 42MX family is designed as a reliable, single-chip ASIC alternative, integrating legacy PLDs into a low-cost device. Key features include 14K system gates, 336 logic cells, and 104 I/O pins. The -2 speed grade offers a balance between performance and power, while the industrial temperature range ensures operation in harsh environments. The 0.45um process technology provides a compact and efficient fabric, and the 3.3V/5V dual-voltage support adds flexibility for mixed-voltage systems. Architecturally, the MX FPGAs employ a sea-of-gates approach with a rich interconnect hierarchy. This allows efficient implementation of combinational and sequential logic. The device supports multiple I/O standards, enabling integration with various logic families. The configurable logic cells offer 4-input lookup tables and flip-flops, providing high logic density and performance. Typical applications include legacy PLD integration, industrial control systems, communications equipment, automotive electronics, aerospace and defense, and medical devices. Its high-volume platform and cost-effectiveness make it an ideal choice for designs requiring a quick time-to-market and easy field upgrades. When designing with this FPGA, ensure proper decoupling of the power supply and consider thermal management for the 176-pin package. The device requires careful I/O voltage planning to avoid damage. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
A42MX09-3PLG84 - 14K Gate FPGA, 84-PLCC | Microchip
The A42MX09-3PLG84 is a Microchip Technology (Microsemi) MX family FPGA providing 14,000 system gates and 336 logic cells in an 84-pin PLCC (J-lead) package with 72 user I/O. It operates from 3.3V/5V supplies on a 0.45um process, with toggle rates of 177 MHz (core) and 296 MHz (I/O), speed grade 3. An FPGA (Field-Programmable Gate Array) is a reprogrammable semiconductor device that implements digital logic through configurable logic blocks and programmable interconnect. Within the programmable logic hierarchy - gate array -> FPGA -> programmable SoC - the MX family occupies the cost-effective, 5V-tolerant segment, positioned as a single-chip ASIC alternative for legacy and high-reliability designs. Key features include the flexible 5.0V-compatible architecture, 72 user I/O pins in a ceramic-friendly PLCC footprint, and single-chip integration that replaces multi-chip legacy PLD solutions. According to Microsemi product literature, the MX family shortens system design cycles while delivering high-volume, low-cost programmable integration suitable for industrial and aerospace-adjacent platforms. Architecturally, the A42MX09 uses Microsemi's MX logic module structure combining combinatorial and sequential modules, programmed via antifuse-based configuration that is non-volatile and immediately active at power-up - no configuration PROM is required, an advantage over SRAM FPGAs such as Xilinx XC4000-class devices where configuration storage is mandatory. Typical applications include legacy PLD consolidation, industrial control glue logic, military/aerospace upgrade programs needing 5V I/O, and bridging/interfacing in mixed 3.3V/5V systems. Design consideration: the PLCC-84 package is through-hole-friendly for socketed designs but verify J-lead coplanarity in reflow assembly; use Microchip Libero/M Designer toolchain for implementation.
A42MX09-3PLG84I - 14K Gate 5V FPGA 84-PLCC | Microchip
The Microchip Technology (Microsemi) A42MX09-3PLG84I is a 14,000-system-gate MX family FPGA with 72 user I/O, 5.0 V core architecture, and 5.6 ns clock-to-out performance, housed in an 84-pin PLCC (84-LCC J-Lead, PLG84) package rated for the industrial temperature range. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing configurable logic blocks and programmable interconnects that the designer wires together after manufacturing, sitting in the programmable-logic hierarchy between CPLDs and full gate-array ASICs. The Microchip/Microsemi MX (40MX and 42MX) families were engineered specifically as low-cost, single-chip ASIC alternatives at 5.0 V, letting designers consolidate legacy PLD, glue-logic, and bus-interface functions into one device for high-volume systems. Key features of the A42MX09 include up to 2.5 kbits of configurable dual-port SRAM, fast wide-decode circuitry, 250 MHz internal performance, 5 ns dual-port SRAM access, and 100 MHz FIFO capability. The -3 speed grade and the widely available 84-PLCC package make this member attractive for through-hole-friendly, J-lead surface-mount boards that must keep a 5 V I/O ecosystem alive. Technically, the MX family is fabricated on a 0.45 um process and provides 336 logic cells for this density, with core and I/O operation at 5.0 V. The Actel/Microsemi antifuse-style programming heritage means configuration is non-volatile and immediately active at power-up, unlike SRAM FPGAs that need a configuration PROM. Typical applications include legacy 5 V industrial control, military/aerospace board upgrades, telecommunications line cards, and consolidation of multiple 22V10/PLD devices into a single chip. Designers should verify I/O banking rules and power distribution on the 84-PLCC footprint, and confirm the -3 speed grade meets timing for 129 MHz to 215 MHz clocking scenarios. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
A42MX09-3PQG160 - 14K Gate 5V FPGA 160-BQFP | Microchip
The Microchip Technology (Actel/Microsemi) A42MX09-3PQG160 is a 14,000-gate CMOS FPGA from the MX family, housed in a 160-pin BQFP (QFP-160) surface-mount package. It provides 684 Configurable Logic Blocks (CLBs), 101 user I/Os, and supports system operation up to 268 MHz on a single 5.0V supply. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing a fabric of configurable logic blocks and programmable interconnects that the designer wires together post-manufacture. Within the programmable logic hierarchy, FPGAs sit above CPLDs and PLDs in capacity and flexibility, and the MX family is a single-chip, antifuse-style ASIC alternative specifically positioned for integrating legacy 5.0V PLD designs into one low-cost, high-volume device. Key features include a 5.0V-tolerant architecture that directly interfaces with legacy 5V bus systems without level shifting, 684 CLBs of programmable logic, and speed-grade -3 timing supporting internal clock rates up to 268 MHz. The 101 available user I/O pins and the 160-BQFP package make the device well suited to through-hole-replacement and industrial retrofits where QFP soldering and 5V compatibility are required. The MX fabric offers deterministic, ASIC-like timing suited to high-volume, cost-sensitive production. Architecturally, the MX family uses a flexible logic module approach with combinational and sequential modules, providing an efficient platform for state machines, glue logic consolidation, and legacy PLD migration. As a one-time-programmable single-chip solution, it removes configuration PROMs and improves reliability compared to SRAM-based FPGAs. Typical applications include industrial control consolidation, legacy PLD integration, telecommunications line cards operating at 5V, military/industrial upgrade programs, and high-volume ASIC prototyping alternatives. Design consideration: verify I/O allocation early, since the 101-user-I/O limit and fixed 160-BQFP pinout require pin planning before PCB layout; also confirm 5V supply integrity with adequate decoupling near all VCC pins.
A42MX09-3PQG160I - 14K Gate MX FPGA, 160-PQFP | Microchip
The Microchip (Microsemi) A42MX09-3PQG160I is a member of the Actel 42MX antifuse FPGA family, providing 14,000 system gates (336 logic cells) with 101 usable user I/O in a 160-pin PQFP (BQFP) package. Speed grade -3 supports toggle rates of 177 MHz (clock-to-out constrained) and up to 296 MHz internal, built on a 0.45 um CMOS antifuse process with a flexible 3.3V/5V tolerant architecture. An FPGA (Field-Programmable Gate Array) is a programmable logic device whose interconnect and logic function are configured after manufacturing. Unlike SRAM-based FPGAs, the MX family uses antifuse technology: configuration is one-time-programmable, requiring no external boot flash and providing inherent resistance to configuration corruption, which is why MX is widely used as a single-chip ASIC alternative for legacy PLD integration in high-volume industrial and defense systems. Key features include the 14K-gate capacity suitable for consolidating multiple legacy PLDs and glue logic, 5V-tolerant I/O for direct interfacing with legacy 5V buses, and the low-cost 160-pin quad flat package with surface-mount assembly compatibility. The industrial temperature range (-40C to +85C, denoted by the I suffix) supports harsh-environment deployment, and lead-free termination supports RoHS-focused supply chains. The MX architecture comprises a sea-of-programmable-logic matrix with routing channels, combinatorial and sequential logic cells, and I/O blocks, programmed via Microsemi (Actel) Designer software and standard programmers. Configuration data is hardened at programming time, eliminating boot delays and configuration memory concerns. Typical applications include legacy PLD consolidation, ASIC prototyping and bridge logic, industrial control, avionics and defense subsystems, and high-volume embedded control where one-time programmability and 5V I/O compatibility are required. Design consideration: antifuse FPGAs are one-time-programmable - finalize and fully verify the design in the free Designer software before committing devices; use speed grade -3 (this part) when timing closure at higher frequencies is needed, as slower grades cost less but reduce timing margin.
A42MX09-3TQG176I - 14K Gate MX FPGA, 104 I/O | Microchip
The Microchip Technology A42MX09-3TQG176I is a 14,000-system-gate antifuse FPGA from the MX family, offering 104 user I/Os, dual-rail supply operation at 3V to 3.6V and 4.75V to 5.25V, and speed grade -3, housed in a 176-pin Thin Quad Flat Pack (TQFP, 24x24 mm) industrial-temperature package. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing a fabric of configurable logic blocks and programmable interconnects that designers configure after manufacturing. Within the programmable logic hierarchy, the MX family sits in the low-cost, high-volume tier of FPGAs, which in turn belong to the broader category of programmable logic devices (PLDs), alongside CPLDs and structured ASICs. The key differentiator of the MX family is its antifuse programmable interconnect architecture. Unlike SRAM-based FPGAs that require a configuration device at every power-up, the antifuse fabric is programmed once and becomes permanent, providing instant-on operation, inherently high design security, and no configuration readback risk. This makes the A42MX09 a reliable single-chip ASIC alternative for integrating legacy PLD designs into one low-cost device. The 5.0V-tolerant, flexible architecture of the MX family supports 5V and 3.3V I/O environments that dominate legacy industrial backplanes, while the -3 speed grade denotes the fastest commercially supported performance bin for this die. With 14K system gates and 104 I/Os, the device addresses glue logic consolidation, bus interfacing, state machines, and control-plane functions. Typical applications include industrial automation control, legacy PLD consolidation, military/aerospace control boards, and high-volume embedded systems where non-volatile, tamper-resistant logic is required without external configuration flash. When designing with the A42MX09-3TQG176I, note that the industrial (I) suffix guarantees -40C to +85C operation, whereas the non-suffixed commercial part is rated 0C to +70C; choose accordingly for the thermal environment. Antifuse programming requires the dedicated Microchip programming flow and cannot be reworked in-field. This page synthesizes distributor pricing, same-package drop-in alternatives across the MX family, and practical design notes not found in the manufacturer datasheet.
A42MX09-3VQG100 - 14K Gate 5V FPGA, 100-TQFP | Microchip
The Microchip Technology (formerly Actel/Microsemi) A42MX09-3VQG100 is a member of the MX FPGA family, providing 14,000 usable system gates, 83 user I/O, and a speed grade of -3 in a 100-pin VQFP/TQFP (14x14 mm) surface-mount package. The MX family is built on a non-volatile, antifuse-based architecture that requires no external configuration PROM, making it a single-chip ASIC alternative. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing a fabric of programmable logic blocks and interconnects that designers configure after manufacturing. The MX family sits within Microchip's programmable logic portfolio as a high-volume, low-cost platform for integrating legacy PLDs and glue logic into a single device. Its 5.0V tolerant architecture distinguishes it from modern low-voltage FPGAs, allowing direct interfacing with 5V TTL systems and legacy bus standards. Key features include 14K system gates, 83 user I/O pins, 5.0V core operation with 5V-tolerant inputs, and the -3 speed grade for general-purpose timing requirements. Because the antifuse fabric is one-time programmable, the device offers inherently secure designs with no bitstream to intercept, plus immunity to configuration readback - a significant advantage for secure embedded systems. Architecturally, the MX fabric combines multiplexer-based combinatorial modules with registered modules, delivering predictable, ASIC-like timing. The flexible clock distribution and dedicated I/O structures support legacy PLD migration and moderate-performance sequential logic. Typical applications include industrial control, legacy design continuation, 5V TTL system interfacing, telecommunications backplanes, and high-volume embedded control where the no-configuration-promise, single-chip operation reduces BOM cost and startup complexity. Design consideration: as a one-time-programmable device, all programming verification must be completed before board assembly; plan your logic utilization headroom (recommend below 80 percent of gates) since no rework is possible after antifuse programming.
A42MX09-F - 54K Gate 5V FPGA | Microsemi/Microchip
The Microsemi (now Microchip Technology) A42MX09-F is a member of the Actel 42MX FPGA family, a single-chip, 5.0V anti-fuse-based field programmable gate array providing up to 54,000 system gates, up to 2.5 kbits of configurable dual-port SRAM, fast wide-decode circuitry, and up to 202 user-programmable I/O pins. Performance figures include 5.6 ns clock-to-out, 250 MHz internal performance, 5 ns dual-port SRAM access, and 100 MHz FIFO capability. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing programmable logic blocks and interconnects that designers configure after manufacturing. Within the programmable logic hierarchy, the MX family sits as a cost-effective, single-chip ASIC alternative, replacing multi-chip PLD and glue-logic solutions with one reliable, high-volume device operating from a 5.0V architecture. Key differentiating features include the anti-fuse programming technology, which yields non-volatile, secure, radiation-tolerant configuration with no external boot memory, and the flexible dual-port SRAM that supports FIFOs and embedded memory functions. Fast wide-decode circuitry accelerates address decoding in microprocessor glue-logic designs. The A42MX09 architecture is based on combinational and sequential logic modules arranged in a segmented routing fabric, delivering predictable timing performance suited to legacy system consolidation. The 5.0V-tolerant I/O structure makes the device a direct fit for older 5V bus environments where modern 3.3V FPGAs require level shifting. Typical applications include legacy PLD consolidation, industrial control systems, 5V bus interfaces, telecommunications backplane logic, and defense/aerospace upgrade programs where long-lifecycle availability matters. Design consideration: verify the exact package suffix (e.g., PQ100, PLG84) before layout, since A42MX09-F is offered in multiple package variants with differing I/O counts, and confirm 5V supply sequencing and programming adapter support in Libero/Macroflow toolchains.
A42MX09-FPQ100 - 14K Gate Antifuse FPGA PQFP-100 | Microchip
The Microchip Technology A42MX09-FPQ100 (originally Actel/Microsemi) is a member of the 42MX antifuse FPGA family, delivering 14,000 system gates (54,000 system gates max configuration), 684 logic cells, and up to 2.5 kbits of configurable dual-port SRAM in a 100-pin PQFP (R-PQFP-G100) package measuring 14mm x 20mm with a 0.65mm terminal pitch. It operates on a flexible 3.3V/5.0V architecture with a maximum toggle rate of 77MHz/129MHz per FindIC data. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing configurable logic blocks (CLBs) and programmable interconnects that designers configure after manufacturing. Within the programmable logic hierarchy, the MX family sits as an antifuse, one-time-programmable (OTP) FPGA, a subset of the broader FPGA and programmable logic IC category. Antifuse technology provides inherent design security, low static power, and immunity to configuration SEUs because no configuration memory cell exists to upset. Key differentiating features include single-chip ASIC-alternative integration with 100% resource utilization and 100% pin locking, deterministic routing delays, fast wide-decode circuitry, and support for integrating legacy PLD designs into one low-cost, high-volume device. The antifuse architecture also eliminates the need for external configuration PROM, reducing BOM cost and board area. Typical applications include legacy PLD consolidation, glueless bus interface logic, industrial control, avionics and defense systems that value OTP design security, and high-volume ASIC prototyping and bridging. The A42MX09-FPQ100M variant extends the operating temperature range to -55C for harsh environments. Design consideration: because the MX family is one-time programmable, verify final logic thoroughly in simulation before programming; pin locking performed during layout must be confirmed against the PQFP-100 pinout, as routing changes after pin assignment can affect timing.
A42MX09-PG132B - MX FPGA 14K Gates 132-Pin CPGA | Microchip
The Microchip Technology (Actel/Microsemi) A42MX09-PG132B is an MX family field programmable gate array (FPGA) providing 14,000 system gates with 95 usable I/O in a 132-pin ceramic pin grid array (CPGA) package. An FPGA is a semiconductor device containing a fabric of programmable logic blocks and programmable interconnects that the designer configures after manufacturing. Within the programmable logic hierarchy, the MX family sits among antifuse-based, one-time-programmable FPGAs, which differ from SRAM-based FPGAs by retaining their configuration permanently without an external boot device. This makes MX devices a reliable, single-chip ASIC alternative for high-volume, cost-sensitive systems. Key features of the A42MX09 include an efficient 5.0 V-tolerant architecture, mixed 3.3V/5V operation, and dual module types: C-modules for combinational logic and S-modules with embedded flip-flops. The 0.45 um antifuse process delivers low cost, low power, and high immunity to configuration upset compared with SRAM FPGA alternatives. Technically, the 42MX routing structure uses segmented and direct interconnect with dedicated quadrant clock networks for low-skew clock distribution. The device operates at internal performance levels cited around 129 MHz to 215 MHz depending on module type and speed grade, and the 132-pin CPGA package provides robust, through-hole or socketed mounting suited to industrial and defense environments. Typical applications include legacy PLD integration, glueless bus interfacing, industrial control, and defense/aerospace systems that benefit from one-time programming, small footprint, and long lifecycle availability. When designing with the A42MX09-PG132B, remember that antifuse programming is permanent: verify the design in Libero/Designer software and on a development socket before committing to programmed devices. This page adds value beyond the datasheet by synthesizing distributor pricing, drop-in alternative options within the MX family, and practical sourcing guidance for this mature, high-reliability device, with pricing as of 2026-08-30.
A42MX09-PG132C - 14K Gate FPGA 95 I/O 132-Pin CPGA | Microsemi
The Microsemi A42MX09-PG132C is a member of the 42MX FPGA family, delivering 14K system gates with 336 logic cells, 95 user I/O, and performance up to 129 MHz/215 MHz in a 132-pin ceramic pin grid array (CPGA) package. Fabricated on 0.45 um process technology, it operates from dual 3.3V/5V supply rails, making it a proven single-chip ASIC alternative for 5V legacy systems. An FPGA (Field-Programmable Gate Array) is a type of programmable logic device that implements digital logic through configurable logic blocks and programmable interconnect, sitting within the broader hierarchy of semiconductors > programmable logic > FPGA. The MX family was designed specifically as a cost-effective, high-volume platform for integrating legacy PLDs and glue logic into a single, reliable 5.0 V device, eliminating multi-chip ASIC NRE costs. Key features include the flexible MX routing structure, quadrant clock networks for low-skew clocking, C-module and S-module implementation options (with D-module and dual-port SRAM on larger family members), and JTAG boundary-scan support via the serial TDI-to-TDO chain. The 95 available I/O support mixed 3.3V/5V interfacing, simplifying integration into industrial systems built around 5V buses. The ceramic CPGA package provides robust mechanical reliability and superior thermal performance compared to plastic packages, historically favored in military, aerospace, and industrial applications where board-level reliability matters. Typical applications include legacy system lifecycle management, industrial control, military/aerospace upgrades of 5V designs, and high-volume replacements for masked ASICs. Design consideration: the 42MX family is mature; verify current lifecycle status and plan for family-level design-in using compatible MX members (A42MX16, A42MX24, A42MX36) to preserve scalability. Pricing as of 2026-08-30 reflects single-unit distributor quotes around $750.83.
A42MX09-PG132M - 14K Gate Antifuse FPGA, 95 I/O | Microchip
The Microchip Technology (Microsemi) A42MX09-PG132M is a 14,000-system-gate antifuse field programmable gate array (FPGA) from the MX family, providing 95 user I/O in a 132-pin ceramic pin grid array (CPGA, package code PG132) with a square 13x13 package outline. The device offers 684 configurable logic blocks (CLBs) and 336 logic modules, with combinatorial delays as low as 2.5 ns and a maximum toggle/clock performance cited at 129 MHz/215 MHz per family data. An FPGA (field programmable gate array) is a semiconductor device containing a matrix of configurable logic blocks and programmable interconnects that the designer wires together to implement custom digital hardware. Within the programmable logic hierarchy, the MX family sits in the antifuse, one-time-programmable (OTP) FPGA class, positioned as a single-chip ASIC alternative for high-volume, low-cost, and design-secure applications. Key features include the efficient 5.0 V-tolerant MX architecture, dual 3.3 V/5 V supply operation, non-volatile antifuse programming that requires no configuration ROM and gives instant-on behavior, and inherent design security because the programmed interconnect is not readable like SRAM configuration bits. The ceramic CPGA package also suits socketed or high-reliability legacy system boards. Technically, the A42MX09 is fabricated on a 0.35-0.45 um CMOS process and integrates a flexible routing fabric with dedicated flip-flops, decode capability, and synchronous/asynchronous module modes. Core supply is nominally 3.3 V (3.0 V to 3.6 V range per Microchip USA), with 5 V-capable I/O supporting legacy system buses. Typical applications include legacy PLD consolidation into a single low-cost device, industrial control, telecommunications line cards, mil/aero program upgrades needing CPGA sockets, and high-volume ASIC prototyping replacements. Design consideration: the MX family is one-time programmable - verify the design fully in simulation and, if available, in a reprogrammable equivalent before committing antifuse programming. This page synthesizes distributor pricing, drop-in alternatives, datasheet links, and design notes not found in the manufacturer datasheet alone.
A42MX09-PLG84A - 14K Gate 5V FPGA, 84-PLCC | Microchip
The Microchip Technology (formerly Microsemi/Actel) A42MX09-PLG84A is a member of the MX FPGA family, delivering approximately 14,000 system gates with 336 logic cells and 72 user I/O in an 84-pin PLCC (J-lead) surface-mount package. It operates on a flexible 5.0 V architecture and is positioned as a single-chip ASIC alternative for legacy logic integration. An FPGA (Field-Programmable Gate Array) is a type of programmable logic IC whose interconnect and logic function are configured by the designer after manufacturing, sitting within the broader hierarchy of programmable logic devices (PLD -> CPLD -> FPGA). The MX family uses antifuse programmability, providing non-volatile configuration, low power, and instant-on operation that distinguish it from SRAM-based FPGAs. Key features include up to 54,000 equivalent system gates in the family, 2.5 kbits of configurable dual-port SRAM, fast wide-decode circuitry, 5.6 ns clock-to-out, 250 MHz performance, and 5 ns dual-port SRAM access supporting 100 MHz FIFOs. The A42MX09 density offers 14K gates and is rated for automotive applications per distributor data (5V, 84-pin PLCC, 0.45 um technology, up to 192 MHz cell performance as listed by Jotrin). Typical applications include legacy PLD consolidation, industrial control, defense and avionics upgrades of 5V systems, glue-logic integration, and high-volume boards where a low-cost, non-volatile single-chip ASIC replacement is desired. When designing with this device, note that 5.0 V I/O makes it ideal for interfacing with legacy TTL/5V-CMOS buses but incompatible with 3.3V-only systems without level translation; verify speed-grade suffix and programming support (e.g., Microchip Libero/Designer tools) before layout.
A42MX09-PLG84M - 14K-Gate 5V MX FPGA, 84-PLCC | Microchip
The Microchip Technology (Microsemi) A42MX09-PLG84M is a member of the MX family of Field Programmable Gate Arrays, offering 14,000 system gates and 72 user I/O in an 84-pin Plastic Leaded Chip Carrier (PLCC) surface-mount package. It operates from a 5.0V core supply, making it a cost-effective single-chip ASIC alternative for legacy 5V systems. An FPGA (Field Programmable Gate Array) is a type of programmable logic device that can be configured by the designer after manufacturing, sitting within the broader hierarchy of programmable logic: SPLD/CPLD -> FPGA -> structured ASIC -> standard-cell ASIC. Microchip's MX (Actel antifuse-based) families provide a reliable, single-chip solution that shortens design cycles while offering high performance in high-volume production. Key features of the MX family include an efficient, flexible 5.0V architecture, antifuse interconnect for non-volatile configuration and high immunity to configuration upset, and single-chip integration that eliminates the need for external configuration devices such as PROMs or flash memory. The 84-PLCC (J-lead) package is widely used in through-hole-era boards converted to surface mount, and its gull-wing-free J-lead form factor offers good mechanical robustness and easy solder-joint inspection. The MX architecture provides dedicated routing resources and predictable, ASIC-like timing behavior, making it suitable for glue logic consolidation, legacy PLD integration, and embedded control in industrial and military/aerospace systems. The A42MX09 combines 9,000 usable logic capacity (14K system gates) with 5V-tolerant I/O, which is a critical differentiator when interfacing with older 5V TTL/CMOS buses that modern 3.3V or 1.8V FPGAs cannot safely connect to. Typical applications include industrial control boards, avionics and defense systems requiring mature, fully characterized silicon, communication backplane glue logic, and consolidation of multiple legacy PAL/GAL/CPLD devices into a single low-cost device. When designing with the A42MX09, verify speed-grade and temperature-range suffix codes against the datasheet, and confirm the 5V supply architecture matches your board power tree, since newer MX variants support dual 3.3V/5.0V operation. Because the device is antifuse-based, programming is one-time - finalize your design in Libero SoC before committing hardware.