Integrierte Schaltungen

PIC16C77-20I/PT

PIC16C77-20I/PT - 8-Bit 20MHz OTP MCU 14KB Flash | TQFP-44

The Microchip Technology PIC16C77-20I/PT is an 8-bit CMOS OTP-based microcontroller from the PIC® 16C family, featuring 14KB (8K x 14) of program memory, 368 bytes of RAM, and 33 digital I/O pins in a 44-pin TQFP (10x10 mm) package. It executes instructions in 200 ns at a 20 MHz clock and operates from a 4V to 6V supply across an industrial -40°C to +85°C temperature range. According to the manufacturer datasheet, the device packs Microchip's PIC16C architecture into a 40- or 44-pin footprint and is upwards source-compatible with the PIC16C5X and PIC12CXXX families. An 8-bit microcontroller (MCU) is a small computing system-on-chip that integrates a CPU, memory, and peripherals into a single silicon die, optimized for embedded control tasks. In the broader taxonomy, a microcontroller sits under microcontrollers -> integrated circuits -> semiconductors, and the PIC16C77 specifically belongs to the PIC16C7x mid-range family, which introduced analog integration and richer peripherals to the classic PIC architecture. Key differentiating features of the PIC16C77 include an on-chip 8-channel, 8-bit Analog-to-Digital converter (ADC), two additional timers, two Capture/Compare/PWM (CCP) modules, a synchronous serial port configurable as 3-wire SPI or 2-wire I²C, and a Universal Asynchronous Receiver Transmitter (USART/SCI). The -20I/PT suffix decodes as 20 MHz maximum clock, industrial (-40°C to +85°C) temperature grade, and PT (plastic TQFP-44) package. The OTP (One-Time-Programmable) memory variant is intended for production volumes where in-field firmware updates are not required. Architecturally, the device uses a Harvard-style design with separate program and data buses, a 14-bit wide instruction word, and only 35 single-word instructions, which keeps code density high and the learning curve gentle. Power management includes sleep mode with wake-up on interrupt, brown-out reset support, and a watchdog timer for safety-critical loops. Typical applications include industrial control systems, motor drive interfacing, sensor signal conditioning, instrumentation front-ends, and embedded communication bridges that benefit from its ADC, USART, and SPI/I²C peripherals. The wide operating voltage range also makes it suitable for 5V-regulated industrial rails. When designing with this part, verify that the OTP memory budget fits the firmware image and plan the programming step into the production flow. Because this is an OTP device, errata or late design changes will require a mask-programmed ROM equivalent (e.g., PIC16CR77). This page synthesizes verified distributor pricing, drop-in same-family alternatives, and practical design guidance drawn from the manufacturer datasheet - information not found on any single distributor listing.

Angebot Kontakt

PIC16C770-E/P

PIC16C770-E/P - 8-Bit 20MHz 3.5KB OTP MCU 20-PDIP | Microchip

The Microchip Technology PIC16C770-E/P is a member of the PIC® 16C family of 8-bit CMOS microcontrollers featuring 3.5KB (2K x 14) of One-Time-Programmable (OTP) program memory, 256 bytes of RAM, and a 20MHz maximum operating frequency, all housed in a 20-pin PDIP (Plastic DIP, 0.300"/7.62mm) through-hole package. The "-E" suffix indicates the Extended industrial temperature grade of -40°C to +125°C, while "/P" denotes the PDIP package, making this variant suitable for prototyping, legacy designs, and harsh-environment deployments. What is an 8-bit microcontroller? An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit data path, typically used for embedded control applications. Within the semiconductor taxonomy, the PIC16C770 belongs to: microcontroller -> 8-bit MCU -> CMOS MCU -> OTP-programmable MCU -> mixed-signal control IC. These devices integrate a CPU core, program memory (ROM/OTP/Flash), data RAM, peripherals, and I/O into a single package, and are widely used where cost, simplicity, and deterministic real-time response outweigh raw throughput. Key features of the PIC16C770-E/P include its 20MHz maximum clock speed, 14-bit instruction word, 8-level hardware stack, and an instruction set optimized for compact code generation. The device integrates multiple peripherals such as a 10-bit Analog-to-Digital Converter (ADC), comparators, capture/compare/PWM (CCP) modules, USART, and multiple timers. These peripherals are essential for mixed-signal applications, enabling direct interface with sensors, actuators, and communication buses without external ICs. Architecturally, the PIC16C770 uses a RISC-based Harvard architecture with separate program and data buses, executing most instructions in a single cycle. Its OTP program memory allows one-time field programming using Microchip's development tools (e.g., PICkit, MPLAB X), providing a cost-effective solution for low-to-medium volume production. The 256-byte RAM is well suited for stack-intensive operations and modest data buffering in control loops. Typical applications include industrial control systems, sensor signal conditioning, motor control interfaces, automotive subsystems (non-safety-critical), and embedded consumer products. The extended temperature range also enables deployment in outdoor or ruggedized equipment. Designers choose this MCU for deterministic interrupt response, low system cost, and a stable, mature toolchain. When designing with the PIC16C770-E/P, ensure the operating voltage (typically 2.5V–5.5V) and clock configuration match the application. For new designs, consider Flash-based PIC16F series equivalents, as the OTP variant cannot be reprogrammed and requires careful code validation. For prototyping, the 20-pin PDIP is breadboard-friendly, simplifying development cycles. This page consolidates distributor pricing, drop-in compatible PIC16C family members, and design notes not aggregated on standard distributor pages, providing practical value beyond the manufacturer datasheet.

Angebot Kontakt

PIC16C770-E/SS

PIC16C770-E/SS - 8-bit OTP MCU, 3.5KB, 16 I/O, 20-SSOP | Microchip

The Microchip PIC16C770-E/SS is an 8-bit CMOS microcontroller from the PIC16C family featuring 3.5KB (2K x 14) of One-Time-Programmable (OTP) program memory, 256 bytes of RAM, and 16 digital I/O pins. It operates at up to 20 MHz and is housed in a 20-pin SSOP (Shrink Small-Outline Package, 0.209 inch / 5.30 mm width) with the -E extended temperature grade. The PIC16C770 belongs to the mid-range PIC16C7xx lineage and integrates a 12-bit ADC, USART, and analog comparators. What is a PIC16C OTP microcontroller? An OTP (One-Time-Programmable) MCU is a microcontroller whose program memory can be written only once by the user, after which the bit pattern is permanent. The PIC16C770 sits within the broader PIC16C mid-range 8-bit family (PIC16C7xx), itself part of Microchip's PIC16 architectural hierarchy (8-bit microcontroller -> embedded controller -> semiconductor). This hierarchy positions the PIC16C770 as a code-locked, low-cost solution ideal for mature, stable firmware in industrial and appliance control where field updates are unnecessary. Key differentiating specifications include the 12-bit on-chip Analog-to-Digital Converter (ADC), an asynchronous USART for serial communications, two analog comparators with programmable reference, an 8-bit timer/counter and a 16-bit timer/counter, and a programmable watchdog timer. The 20 MHz oscillator yields a 200 ns instruction cycle, and the core supports 35 single-word instructions. Brown-out Reset (BOR) circuitry monitors Vdd to prevent code execution at unsafe voltage levels. Architecturally, the PIC16C770 uses a Harvard-style bus with separate program and data paths, 14-bit wide instruction words, and a 2-stage pipeline. Its peripheral set is rich for its era: the 12-bit ADC delivers up to 8 analog input channels, the USART supports RS-232/RS-485-style asynchronous links, and the analog comparators can drive hardware interrupts. Brown-out Reset and Power-on Reset are standard. Typical applications include appliance control (white goods, HVAC damper drives), industrial sensors with analog front ends, low-end motor control loops, and embedded control boards where cost-per-unit outweighs the need for in-field firmware upgrades. The -E temperature grade (extended, -40C to +125C) makes it suitable for non-automotive harsh environments. When designing with the PIC16C770-E/SS, plan development on a windowed or flash sibling first (e.g., PIC16F77) because OTP parts cannot be re-programmed. Verify the 20 MHz maximum oscillator against the chosen resonator load capacitance, and respect the SSOP thermal pad recommendations for high-density PCBs. This page synthesizes Microchip parametric data, distributor pricing and inventory as of 2026-09-19, and a drop-in alternatives comparison not found in the standalone datasheet, giving engineers an integrated procurement and substitution reference.

Angebot Kontakt

PIC16C770-I/SO

PIC16C770-I/SO - 8-Bit CMOS MCU, 20MHz, 3.5KB OTP | Microchip

The Microchip Technology PIC16C770-I/SO is an 8-bit CMOS microcontroller built on the PIC16 architecture, integrating 3.5KB (2K x 14) of One-Time-Programmable (OTP) program memory, 256 bytes of RAM, and 16 digital I/O pins in a 20-pin SOIC package. Operating from a 4V to 5.5V supply at up to 20MHz, it executes instructions in 200 ns, with only 35 single-word instructions providing an easy-to-learn RISC-like instruction set upwardly compatible with the PIC16C5X and PIC12CXXX families. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory, RAM, and peripheral set, used to embed control logic directly into a product. Within the broader taxonomy, the PIC16C770 belongs to the 8-bit MCU class, which itself is a subcategory of microcontrollers -> embedded processors -> integrated circuits -> semiconductors. The PIC16 mid-range family sits between the baseline PIC10/12/16C5X and the enhanced PIC17/PIC18 families, balancing code density, peripheral integration, and cost. Key features of the PIC16C770 include 6 channels of 12-bit Analog-to-Digital conversion (enabling high-precision sensor measurement without external ADC circuitry), a 200 ns instruction cycle, an integrated oscillator option, and on-chip peripherals typical of the PIC16 mid-range family such as timers, a watchdog timer, and a synchronous/asynchronous serial port. The 12-bit ADC resolution is unusual for a general-purpose 8-bit MCU, allowing the device to discriminate very small analog signal changes. The architecture combines a Harvard bus structure (separate program and data paths) with CMOS process technology, delivering deterministic interrupt latency and very low standby current. Because the part uses OTP EPROM rather than Flash, firmware is committed during production programming and cannot be field-updated, which is appropriate for high-volume, cost-sensitive, closed-spec products where firmware is stable. Typical applications include industrial sensor signal conditioning with on-chip 12-bit ADC, motor-control feedback loops, automotive body and chassis subsystems, embedded control subsystems in white goods and HVAC equipment, and analog front-end interfaces for instrumentation. The 6-channel 12-bit ADC particularly suits multi-sensor platforms where board area and BOM cost must be minimized. When designing with this part, plan OTP programming into the production flow and verify code protection bits to prevent unauthorized firmware read-back. Confirm the 20-pin SOIC land pattern matches the chosen footprint variant (0.295" / 7.50mm body width) and budget adequate decoupling near VDD to keep the ADC SNR within datasheet limits. This page synthesizes distributor stock, parametric pricing, and design considerations for the PIC16C770-I/SO in a single engineering reference, beyond what the manufacturer datasheet alone provides.

Angebot Kontakt

PIC16C770-I/SS

PIC16C770-I/SS - 8-Bit MCU, 20MHz, 3.5KB OTP, 12-bit ADC | Microchip

The Microchip Technology PIC16C770-I/SS is an 8-bit CMOS RISC microcontroller featuring 3.5KB (2K x 14) One-Time-Programmable (OTP) program memory, 256 bytes of RAM, and 16 I/O pins, operating at up to 20 MHz in a 20-pin SSOP package. The device integrates six channels of 12-bit Analog-to-Digital conversion, allowing designers to discriminate small signal changes and eliminate external precision analog circuitry. The PIC16C770 belongs to Microchip's mid-range PIC16 family and uses a Harvard architecture with a separate instruction and data bus, supporting 35 single-word instructions. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (ROM/Flash/OTP), volatile data memory (RAM), and peripherals such as timers, communication interfaces, and analog converters into one package. The PIC16C770 specifically belongs to the OTP-programmable subset of the PIC16 mid-range family, which sits between baseline (PIC10/12/16) and enhanced mid-range (PIC16F1xxx) architectures. OTP microcontrollers are typically used for low-volume production or where firmware is finalized and field reprogramming is not required, offering a cost advantage over Flash-based equivalents. Key features include six 12-bit ADC channels with up to 12-bit resolution, a 20 MHz maximum operating frequency yielding a 200 ns instruction cycle, 256 bytes of data RAM, 16 digital I/O pins, and a wide operating voltage range suitable for 5V systems. The integrated 12-bit ADC delivers 4096 discrete codes, providing a substantial improvement over the 8-bit or 10-bit converters found in many competing 8-bit MCUs. The 20-pin SSOP (5.30 mm body width) package supports surface-mount assembly while preserving a small PCB footprint suitable for compact sensor-interface modules. The architecture uses a RISC instruction set with single-cycle execution for most instructions and a two-stage pipeline, allowing deterministic interrupt response and predictable timing. The 12-bit successive-approximation ADC includes sample-and-hold and supports multiple reference voltage options, enabling direct interfacing with low-level sensor outputs such as thermistors, strain gauges, and bridge sensors. Brown-out Reset (BOR), Power-on Reset (POR), and Watchdog Timer (WDT) with its own on-chip RC oscillator are included for robust operation in industrial environments. Typical applications include sensor signal conditioning, industrial process control, portable instrumentation, battery chargers, and closed-loop feedback systems where the 12-bit ADC eliminates the need for external ADCs. The combination of OTP program memory and SSOP-20 packaging suits space-constrained designs requiring high-performance analog measurement with stable firmware. When designing with this device, ensure that the OTP programming step is planned into the manufacturing flow because OTP memory cannot be erased or reprogrammed. Decoupling capacitors of 100 nF should be placed close to VDD/VSS pins, and the analog supply traces (AVDD/AVSS) should be isolated from noisy digital lines to preserve ADC accuracy. The MCLR pin requires a proper reset circuit; an external pull-up and a 10-100 nF capacitor on MCLR will improve noise immunity. This page synthesizes distributor pricing, drop-in alternatives from the same Microchip PIC16 family, and practical design considerations not consolidated in any single manufacturer document.

Angebot Kontakt

PIC16C770/JW

PIC16C770/JW - 20MHz 8-bit OTP MCU w/ 12-bit ADC | Microchip

The Microchip Technology PIC16C770/JW is a CMOS OTP-based 8-bit microcontroller built on Microchip's PIC16 mid-range architecture, delivering 200 ns instruction execution and a 20 MHz maximum operating frequency in an 18-pin windowed ceramic DIP (CDIP) package. The /JW suffix indicates a UV-erasable, windowed ceramic package intended for prototype development and code iteration, while the base PIC16C770 die provides 3.5 KB (2K x 14) of EPROM program memory and integrates 6 channels of 12-bit Analog-to-Digital conversion. The device operates from a single 5 V supply and is rated for the commercial 0C to +70C temperature range. An 8-bit PIC microcontroller is a compact, deterministic RISC processor that integrates CPU core, non-volatile program memory, RAM, and peripherals onto a single die. Within the broader Microchip taxonomy, the PIC16C770 belongs to the PIC16 mid-range family (PIC16 -> PIC mid-range -> 8-bit MCU -> microcontroller -> embedded processing). Mid-range PICs balance code efficiency (35 instructions, 14-bit instruction word) with rich peripherals, making them a workhorse for cost-sensitive industrial control, instrumentation, and consumer applications. Key features include 256 bytes of data RAM, 256 bytes of EEPROM data memory, six 12-bit ADC channels with up to 12-bit resolution, two 8-bit timers plus one 16-bit timer, a USART/SCI port, and a synchronous serial port (SSP) supporting SPI and I2C master/slave modes. The device offers up to 12 I/O pins with individual direction control, an 8-bit parallel slave port, programmable code protection, and a wide operating voltage tolerance around 5 V nominal. Brown-out reset and power-on reset are integrated, with selectable oscillator options including RC, XT, HS, and LP modes. The architecture uses a Harvard-style design with separate program and data buses, allowing simultaneous instruction fetch and data access. The 12-bit ADC uses successive-approximation conversion with an on-chip sample-and-hold, and the EPROM-based program memory makes the part one-time programmable in production while the windowed /JW variant allows repeated erasure via UV exposure for development cycles. Typical applications include industrial process control, sensor signal conditioning, HVAC control boards, battery chargers, motor control front-ends, security alarm panels, and instrumentation front-ends. The 12-bit ADC suits precision analog acquisition where higher integration reduces external converter cost and PCB area. Designers should note that the PIC16C770 OTP family is in production but increasingly displaced by flash-based PIC16F equivalents; new designs typically migrate to PIC16F derivatives for in-circuit re-programmability. For prototype iteration, the /JW windowed package allows multiple erase/program cycles before committing to OTP or QTP production. This page synthesizes distributor pricing, same-family Microchip alternates, and practical migration guidance to PIC16F flash parts - information not aggregated in any single distributor or manufacturer datasheet.

Angebot Kontakt

PIC16C770/SS

PIC16C770/SS - 8-Bit 20MHz 3.5KB OTP MCU | Microchip | 20-SSOP

The Microchip Technology PIC16C770/SS is an 8-bit CMOS OTP-based microcontroller built on Microchip's PIC16C architecture, offering 20 MHz instruction execution (200 ns instruction cycle), 3.5 KB of OTP program memory organized as 2K x 14 words, 256 bytes of RAM, and 128 bytes of EEPROM data memory in a 20-pin SSOP package. Headline parameters include a 20 MHz maximum clock, 35 single-word instructions, and 6 channels of 12-bit Analog-to-Digital conversion for precision sensor interfacing. A PIC microcontroller (Programmable Interface Controller) is a family of 8-bit, 16-bit, and 32-bit RISC-based microcontrollers from Microchip Technology built on a Harvard architecture (separate program and data buses). The PIC16C sub-family is the mid-range line that targets mixed-signal embedded applications requiring on-chip analog peripherals. Within that hierarchy, the PIC16C770 belongs to the PIC16C7xx lineage, positioned above PIC12C/16C5X baseline parts and below PIC17C/PIC18C advanced parts, making it a sweet spot for cost-sensitive industrial control and sensor-interface products. Key differentiating features of the PIC16C770 include the 12-bit ADC (uncommon for a 20-pin PIC of this generation; most peers offer only 8 or 10 bits), an internal 8 MHz oscillator with PLL flexibility, and Microchip's NanoWatt power management. The device also integrates a USART, SSP/SPI/I2C-compatible synchronous serial port, multiple timers (Timer0, Timer1, Timer2), and a Capture/Compare/PWM module, providing a balanced peripheral set for motor, lighting, and instrumentation designs. Architecturally, the PIC16C770 uses a 14-bit instruction word with a single accumulator (W register) and a 2-stage pipeline, executing most instructions in one instruction cycle. The 12-bit ADC is successive-approximation register (SAR) based with selectable reference voltage, supporting conversion rates suitable for instrumentation and process-control loops at sub-millisecond latencies. Typical applications include industrial sensor signal conditioning, battery management analog front-ends, multi-channel data loggers, white goods and appliance control, and low-cost instrumentation. The wide operating voltage range (2.5V to 5.5V) and 12-bit ADC make it particularly attractive for 4-20 mA loop replacement designs and precision thermistor/bridge sensor readouts. When designing with the PIC16C770, plan OTP programming into the production flow because OTP (One-Time-Programmable) memory cannot be erased. For prototypes or low-volume runs, consider the PIC16F770 flash-based variant, which shares the same pinout and peripheral set for easier firmware iteration.

Angebot Kontakt

PIC16C770T-E/SS

PIC16C770T-E/SS - 8-Bit 20MHz PIC MCU 3.5KB OTP | Microchip

The Microchip Technology PIC16C770T-E/SS is a 20 MHz, 8-bit PIC16C-series CMOS OTP microcontroller housed in a 20-pin SSOP package. It integrates 3.5 KB of OTP program memory (organized as 2K x 14 words), 256 bytes of RAM, and 6 channels of 12-bit Analog-to-Digital conversion with the PIC mid-range core. The 'E' temperature suffix designates the extended industrial temperature grade (-40C to +125C), making the part suitable for harsh-environment and automotive-adjacent designs. A PIC16C microcontroller is a member of Microchip's classic mid-range 8-bit RISC MCU family. The PIC16C family sits in the broader hierarchy: microcontroller -> embedded MCU -> 8-bit MCU -> PIC mid-range core -> PIC16C sub-family. These OTP (One-Time Programmable) parts use CMOS technology with Harvard architecture, providing deterministic instruction execution at 200 ns per instruction (5 MIPS at 20 MHz) with only 35 single-word instructions. PIC16C parts are the precursors to the flash-based PIC16F family and remain in production for long-life industrial and automotive programs. Key features of the PIC16C770 include 12-bit ADC accuracy, an integrated 12-channel 8-bit ADC variant option, hardware USART, MSSP for SPI/I2C, and dual analog comparators. With 6 channels of 12-bit ADC, the device can directly digitize multi-sensor analog signals without external converters. The SSOP-20 footprint offers a compact surface-mount form suitable for dense PCBs. The PIC16C770's mid-range core, 12-bit ADC, and extended temperature range make it a strong fit for industrial sensor conditioning, automotive sensor interfaces, smart battery management modules, and motor control feedback loops. The OTP memory design supports low-cost high-volume production where code stability is finalized and field updates are not required. When designing with the PIC16C770T-E/SS, engineers should note that OTP memory cannot be reprogrammed - firmware must be fully verified before programming. In-system debugging is not available; OTP parts require a programmer socket or pre-programmed parts for evaluation. For development, use the equivalent PIC16F770 flash-based part with emulator support.

Angebot Kontakt

PIC16C770T/SO

PIC16C770T/SO - 8-Bit OTP MCU, 20MHz, 3.5KB, 12-bit ADC | Microchip

The Microchip Technology PIC16C770T/SO is an 8-bit PIC® microcontroller IC delivering 20MHz CPU performance with 3.5KB (2K x 14) OTP program memory and 256 bytes of RAM, housed in a 20-pin SOIC package. The "T" suffix indicates tape-and-reel packaging and the "SO" suffix denotes the 300-mil SOIC footprint. The PIC16C770T/SO integrates a 12-bit ADC with 6 input channels for mixed-signal embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data RAM, and configurable peripherals such as ADC, timers, and communication ports into one package. The PIC16C770 belongs to the PIC16C mid-range family (8-bit -> mid-range MCU -> microcontroller -> embedded processor -> semiconductor), offering low power consumption, deterministic interrupt latency, and RISC-based Harvard architecture. OTP (One-Time Programmable) program memory targets cost-sensitive production runs where firmware is finalized and code updates are not required. The PIC16C770T/SO features 200ns instruction execution time, 35 single-word instructions, 16 I/O pins, and 6 channels of 12-bit A/D conversion for sensor interfacing. It supports a wide 2.5V to 5.5V operating voltage and an industrial temperature range of -40C to +85C. The device is upward compatible with the PIC16C5X and PIC12CXXX families, simplifying migration paths. The PIC16C770 architecture uses a 14-bit instruction word with an 8-bit data path, providing a compact code density advantage over 8-bit CISC controllers. The integrated 12-bit ADC with 6 channels eliminates external ADC components in applications such as sensor signal acquisition, industrial process control, and instrumentation front-ends. Typical applications include industrial control systems, sensor interface modules, embedded instrumentation, and low-power data acquisition boards. The 12-bit ADC supports 4096-step resolution across the 2.5V to 5.5V range, enabling precision measurement in tightly constrained analog designs. When designing with this device, note that OTP memory cannot be reprogrammed - use the windowed JW variant for prototype development. Ensure the supply decoupling network includes a 0.1uF ceramic capacitor placed within 5mm of the VDD pin for ADC noise immunity. This page synthesizes distributor stock levels, drop-in same-family alternatives, and engineering design considerations not present in the standalone PIC16C770 datasheet, giving engineers a faster decision workflow.

Angebot Kontakt

PIC16C771-E/P

PIC16C771-E/P - 8-Bit 20MHz OTP MCU with 12-bit ADC | Microchip

The Microchip Technology PIC16C771-E/P is an 8-bit CMOS OTP-based microcontroller that executes instructions in 200 ns (20 MHz clock), delivering up to 5 MIPS of throughput in a 20-pin PDIP through-hole package. It integrates 7 KB (4K x 14) of OTP program memory, 256 bytes of RAM, and 6 channels of 12-bit Analog-to-Digital (A/D) converter, enabling precision measurement of analog signals without external circuitry. The device is part of the PIC16C717/770/771 family, providing 16 digital I/O lines and supporting 35 single-word instructions for code-efficient RISC-style programming. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals. The PIC16C771 sits in Microchip's PIC16 mid-range family, an evolution of the PIC16C5X baseline architecture that adds ADC, interrupts, and more memory while retaining the 14-bit instruction word. In the broader system hierarchy, MCUs belong to the embedded processor category and serve as the central control element in products ranging from white goods to industrial sensors. The PIC16C771-E variant is specified for the extended industrial temperature range (-40C to +125C), making it suitable for harsh-environment applications. Other key features include a 12-bit ADC with 6 input channels, an 8-bit timer/counter, a 16-bit timer/counter, a Watchdog Timer with its own on-chip RC oscillator, and a synchronous serial port (SSP) supporting SPI and I2C master/slave modes. The device operates from 2.5V to 5.5V. The OTP (One-Time Programmable) architecture provides a low-cost path for production units while keeping firmware locked in a non-volatile on-chip memory. The PIC16C771-E/P supports in-circuit serial programming (ICSP) for flexible manufacturing flows, and code protection is selectable per datasheet. Typical applications include industrial sensor signal conditioning, automotive body electronics, battery chargers, power supply monitoring, and instrumentation front-ends where the 12-bit ADC eliminates an external converter. In multi-rail designs, the ADC can monitor rail voltages and trigger firmware shutdown on brown-out events. When designing with this device, allocate sufficient decoupling (0.1 uF + 10 uF bulk) close to VDD and AVdd, and ensure the MCLR pin is pulled high through a resistor. The ADC accuracy depends on a clean AVdd rail; a ferrite bead or LDO between Vdd and AVdd is recommended for precision measurements.

Angebot Kontakt

PIC16C771-E/SO

PIC16C771-E/SO - 8-bit OTP MCU, 7KB, 12-bit ADC | Microchip

The Microchip PIC16C771-E/SO is a CMOS OTP-based 8-bit microcontroller from the PIC16C7xx family, packaged in a 20-pin SOIC (SO) and offering 7KB of program memory, 256 bytes of SRAM, and 6 channels of 12-bit Analog-to-Digital conversion. It executes instructions in a 200 ns cycle (5 MHz oscillator / 20 MHz oscillator with 4x PLL) and supports 16 digital I/O pins. The '-E' suffix indicates the Extended industrial temperature grade of -40C to +125C, and the '/SO' suffix designates the 300-mil SOIC-20 surface-mount package. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, program memory, timers, and I/O peripherals on one die. Within the broader taxonomy, the PIC16C771 belongs to the PIC16 family of mid-range MCUs, itself a subfamily of Microchip's PIC microcontrollers, which sit inside the larger microcomputer -> microprocessor -> integrated circuit hierarchy. OTP (One-Time Programmable) memory can be written only once using a device programmer, which makes these parts well suited to production-volume embedded designs that do not need firmware updates. Key features include 6 channels of 12-bit ADC with up to 12-bit resolution, a USART for asynchronous serial communication, an SSP module for SPI / I2C, capture/compare/PWM (CCP), two 8-bit timers plus one 16-bit timer, a watchdog timer with on-chip oscillator, brown-out reset, in-circuit serial programming (ICSP), and code protection. The 12-bit ADC is the defining advantage over the older PIC16C71 8-bit ADC parts, allowing direct interface to higher-precision analog sensors without external ADCs. Typical applications include industrial process control, sensor signal conditioning with on-chip 12-bit ADC, motor control with PWM, battery chargers, instrument panels, and any embedded design that needs a one-time programmable 8-bit controller with precise analog measurement. The wide operating temperature range and 20 MHz instruction execution make it suitable for automotive under-hood nodes and harsh industrial environments.

Angebot Kontakt

PIC16C771-E/SS

PIC16C771-E/SS - 8-bit MCU, 7KB OTP, 12-bit ADC | Microchip

The Microchip PIC16C771-E/SS is a CMOS OTP-based 8-bit PIC microcontroller delivering 200 nanosecond instruction execution in a 20-pin SSOP package. It integrates 7KB of program memory (4K x 14), 256 bytes of RAM, 16 I/O pins, and 6 channels of 12-bit Analog-to-Digital conversion with a 20 MHz operating frequency. An 8-bit microcontroller (MCU) is a programmable integrated circuit that executes instructions 8 bits at a time. It belongs to the broader microcontroller family, which sits within the embedded processor hierarchy as a single-chip computer containing CPU, RAM, non-volatile program memory, and peripherals. 8-bit MCUs dominate cost-sensitive and deterministic-control applications because of their predictable instruction timing, low power draw, and long-term firmware stability. Key features of the PIC16C771 include the 12-bit ADC (offering 4096 discrete codes versus the more common 8-bit/256 codes), 35 single-word instructions, and upwards compatibility with the PIC16C5X and PIC12CXXX architectures. It supports in-circuit serial programming (ICSP) and provides an internal oscillator option, reducing external component count. The 20 MHz clock yields 5 MIPS of throughput, and the wide 2.5V-5.5V operating range suits both 3.3V and 5V designs. Technically, the device uses a RISC-based Harvard architecture with separate program and data buses, enabling simultaneous instruction fetch and operand access. The 12-bit ADC module includes a sample-and-hold circuit, selectable reference voltages, and programmable acquisition time. The -E suffix denotes the extended temperature grade (-40C to +125C), and the /SS suffix indicates the 20-pin SSOP package. Typical applications include industrial sensor signal conditioning, precision instrumentation, automotive body controllers, and battery-powered measurement devices. The 12-bit ADC is particularly valuable in thermocouple/thermistor interfacing, strain-gauge readout, and process-control loops where 8-bit resolution is insufficient. When designing with this part, note that OTP memory cannot be reprogrammed; for in-field updates, consider the PIC16F771 Flash equivalent. Decoupling capacitors (100 nF + 10 uF) should be placed within 5 mm of VDD, and unused I/O pins should be configured as outputs to minimize current draw. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, supporting faster component selection and BOM validation.

Angebot Kontakt

PIC16C771-I/SS

PIC16C771-I/SS - 8-bit 20MHz MCU, 7KB OTP, 12-bit ADC | Microchip

The Microchip Technology PIC16C771-I/SS is an 8-bit CMOS microcontroller based on the PIC16C family, delivering 20MHz operation with 7KB of one-time-programmable (OTP) program memory (4K x 14 words) and 256 bytes of RAM, packaged in a 20-pin SSOP (Shrink Small Outline Package). It integrates a 12-bit Analog-to-Digital Converter with up to 6 input channels, enabling high-precision measurement of analog signals without requiring external ADC circuitry. What is a PIC16C microcontroller? The PIC16C family is a legacy line of 8-bit OTP-programmable microcontrollers from Microchip Technology based on a RISC Harvard architecture. An 8-bit MCU executes one byte per instruction cycle, providing deterministic timing suitable for embedded control. Positioned in the taxonomy: PIC16C771 -> PIC16C family -> 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. The PIC16C771 is a mid-range PIC16 device with 14-bit instruction word width, offering a balance of code density, peripheral integration, and I/O count for cost-sensitive industrial and consumer designs. Key features include 16 digital I/O pins, a 12-bit ADC (6 channels), two 8-bit timers plus one 16-bit timer, a USART for serial communication, and a synchronous serial port (SSP) supporting SPI and I2C master/slave modes. The device operates from 2.5V to 5.5V, supports in-circuit serial programming (ICSP), and includes programmable code protection. The I/SS industrial temperature grade supports -40C to +85C operation, suitable for harsh environments. From an architectural perspective, the PIC16C771 employs a Harvard architecture with separate program and data buses, allowing instruction fetch and operand read in a single cycle. Its 14-bit instruction word provides compact code representation, and the 8-level deep hardware stack simplifies interrupt handling. OTP memory enables low-cost prototyping with quick turnaround for production runs under ~10K units. Typical applications include industrial sensor signal conditioning, precision temperature and pressure measurement, motor control feedback loops, analog front-end interfaces for instrumentation, and embedded control nodes where on-chip 12-bit ADC resolution eliminates external converters. The wide I/O count makes it well suited for keypad scanning, LCD driving, and small multi-sensor nodes. When designing with this device, ensure decoupling capacitors (0.1uF ceramic) are placed within 5mm of the VDD pins, and consider using ICSP for field updates during prototyping. Note that OTP memory cannot be erased electrically - use flash-based PIC16F equivalents for re-programmable designs.

Angebot Kontakt

PIC16C771/JW

PIC16C771/JW - 8-Bit 20MHz 7KB EPROM MCU w/ 12-bit ADC | Microchip

The Microchip Technology PIC16C771/JW is an 8-bit CMOS OTP-based mid-range microcontroller featuring a 20 MHz core (200 ns instruction cycle), 7 KB of UV-erasable EPROM program memory organized as 4K x 14 words, and 256 bytes of data RAM, housed in a 20-pin ceramic CDIP (JW) windowed package. Its headline differentiating feature is an integrated 12-bit A/D converter with 6 input channels, which removes the need for external ADC ICs in precision analog measurement applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and programmable peripheral interfaces. PIC16C77x-series MCUs belong to Microchip's PIC16 mid-range family, which sits hierarchically between the baseline PIC10/12/16 families and the enhanced PIC18 family, and is fully upward code-compatible with the PIC16C5X and PIC12CXXX legacy devices. Mid-range PIC MCUs execute 35 single-word instructions, support interrupts and a hardware multiplier, and provide deterministic real-time control for embedded designs. Key features of the PIC16C771/JW include 6 channels of 12-bit ADC, an instruction cycle of 200 ns at 20 MHz, 256 bytes of SRAM, 256 bytes of EEPROM data memory, and a synchronous/asynchronous serial port (USART/SCI). The device also integrates a 16-bit timer/counter with a 3-capture/compare/PWM structure plus an 8-bit timer/counter, a Watchdog Timer with its own on-chip RC oscillator, power-on reset, power-up timer, brown-out reset, and a programmable code-protection scheme. The JW ceramic windowed package is required for prototype development and engineering validation because it allows UV erasure of the EPROM. Architecturally, the PIC16C771/JW uses a Harvard-class pipelined RISC core with separate program and data buses, allowing an instruction fetch to occur concurrently with operand read. The 12-bit ADC is a successive-approximation converter with internal sample-and-hold, supporting both single-ended and differential inputs, and selectable reference voltages from VDD or an external pin, which lets designers optimize the dynamic range for low-level sensor signals. Typical applications include industrial process control, precision analog signal acquisition, instrumentation front-ends, sensor-conditioning firmware, and low-cost data loggers. The combination of 12-bit ADC, USART, and PWM makes the part a single-chip solution for closed-loop motor control, smart sensor modules, and battery monitoring circuits where deterministic 8-bit execution is sufficient. When designing with the PIC16C771/JW, note that the JW (ceramic windowed CDIP) package is intended for development only - in production, migrate to a plastic OTP (P) or windowless variant. Operating voltage is 4.0 V to 6.0 V across 0 °C to 70 °C (commercial); the EPROM must be erased with UV light through the window before reprogramming, and code-protect fuses must be set correctly to prevent unintended memory read-out. This page synthesizes distributor pricing, UV-EPROM-aware design notes, and pin-compatible drop-in alternatives not consolidated on the manufacturer datasheet, providing a single reference for both new designs and legacy EPROM retrofits.

Angebot Kontakt

PIC16C771T-E/SO

PIC16C771T-E/SO - 8-bit 20MHz MCU 7KB OTP 20-SOIC | Microchip

The Microchip Technology PIC16C771T-E/SO is an 8-bit PIC16C-series RISC microcontroller built around a 20MHz core, integrating 7KB of One-Time Programmable (OTP) program memory (4K x 14 words) and a 12-bit Analog-to-Digital Converter (ADC) with 6 input channels. The device is supplied in a 20-pin SOIC (SO) wide-body package on Tape & Reel, making it suitable for automated surface-mount assembly in moderate-volume production runs. An OTP microcontroller is a type of embedded controller whose program memory can be written only once and is non-volatile after programming, sitting within the broader hierarchy of microcontroller (MCU) -> embedded controller -> semiconductor IC. Unlike Flash-based MCUs that allow in-circuit re-programming, OTP variants ship with empty program memory and are intended for cost-sensitive, high-volume, firmware-finalized designs where code revision cycles have ended. Key features include an extended operating temperature range of -40C to +125C (TA), 4V to 5.5V supply voltage, low-power CMOS architecture, a 12-bit 6-channel ADC, and standard PIC16C-series peripherals. The 8-bit accumulator-based core executes most instructions in a single clock cycle (4 oscillator cycles), delivering roughly 5 MIPS at 20MHz. The 12-bit ADC distinguishes this part from the many 8-bit and 10-bit ADC PIC16C devices, enabling higher-resolution analog measurements. Typical applications include sensor signal conditioning with high-resolution analog front ends, industrial process control modules, automotive body electronics (AEC-Q100 not formally qualified for this part family), and cost-sensitive consumer appliances. The 12-bit ADC paired with 7KB of OTP code supports designs that need more code space than the entry-level PIC16C558 but do not require the larger PIC17C or PIC18C families. When designing with this device, note that the OTP memory cannot be re-programmed in-circuit; firmware must be fully validated before committing. Engineers should also confirm peripheral compatibility with their target toolchain (MPLAB, MPASM) and that the 4V minimum VDD meets any brownout requirements in their application.

Angebot Kontakt

PIC16C771T-E/SS

PIC16C771T-E/SS - 8-Bit 20MHz MCU, 7KB OTP, 20-SSOP | Microchip

The Microchip Technology PIC16C771T-E/SS is an 8-bit PIC® 16C-series CMOS OTP-based microcontroller delivering 200 ns instruction execution at 20 MHz operating frequency, packaged in a 20-pin SSOP (0.209 inch / 5.30 mm body width). It integrates 7 KB of OTP program memory organized as 4K × 14 words, 256 bytes of data RAM, and an on-chip 12-bit Analog-to-Digital converter with 6 input channels suitable for mixed-signal embedded designs. An 8-bit microcontroller (MCU) is a small computer-on-a-chip that integrates a CPU, program memory, data RAM, and peripherals into a single package optimized for embedded control. PIC microcontrollers use a Harvard RISC architecture with a small instruction set (35 single-word instructions for the PIC16C family), making them easy to program in assembly or C. The PIC16C series sits within the broader microcontroller taxonomy: PIC16C -> PIC16 family -> 8-bit PIC -> microcontroller -> integrated circuit -> semiconductor. OTP (One-Time-Programmable) memory is programmed once and cannot be erased, which lowers unit cost compared to flash-based MCUs but eliminates field reprogrammability. Key features of the PIC16C771 include 6 channels of 12-bit A/D conversion enabling precision sensor interfacing, plus dedicated I2C and SPI communication peripherals for connecting to external sensors, EEPROMs, and displays. The device also integrates a PWM module, a Watchdog Timer (WDT), Brown-out Reset (BOR), and Power-on Reset (POR) for robust operation in noisy industrial environments. The industrial -40C to +125C operating temperature range supports deployment in harsh factory and automotive under-hood applications. Architecturally, the PIC16C771 is pin-compatible with the PIC16C770 and PIC16C7XX family and is upwards compatible with the PIC16C5X and PIC12CXXX devices, preserving legacy code and PCB layouts. The PIC16C core uses a 14-bit instruction word with a 35-instruction RISC set and a 200 ns minimum instruction cycle at 20 MHz, providing predictable deterministic timing for real-time control loops. Typical applications include industrial sensor signal conditioning, closed-loop motor control, automotive sensor interfaces, multi-channel data acquisition front-ends, and embedded mixed-signal consumer products. Its low pin count and integrated ADC make it attractive for cost-sensitive 5 V designs where a small footprint and minimal external components are required. When designing with the PIC16C771T-E/SS, note that OTP memory cannot be field-updated; plan firmware revision strategy accordingly and use the -E (Extended) temperature grade for industrial deployments. The 20-SSOP footprint matches several PIC16C7X family members, allowing PCB reuse across variants. This page synthesizes distributor stock data, drop-in pin-compatible alternatives, and engineering notes that go beyond the manufacturer datasheet to support sourcing, replacement, and design decisions.

Angebot Kontakt

PIC16C771T-I/SO

PIC16C771T-I/SO - 8-Bit 20MHz OTP MCU 7KB | Microchip

The Microchip Technology PIC16C771T-I/SO is an 8-bit PIC16C-series CMOS microcontroller built around a RISC core running at up to 20 MHz, integrating 7 KB of OTP program memory (4K x 14 words) and 256 bytes of data RAM in a 20-pin SOIC (SO) package supplied on tape and reel. It belongs to the PIC16C mid-range family and is targeted at cost-sensitive embedded control applications where in-system code updatability is not required and one-time-programmable memory is acceptable. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and a configurable set of peripherals. The PIC16C mid-range architecture uses a 14-bit instruction word and a Harvard bus, which separates program and data fetches to keep interrupts and deterministic I/O timing simple. MCUs sit within the broader hierarchy of microprocessors, embedded processors, and integrated circuits, and form the foundation of nearly every modern electronic product. Key features include 20 MHz maximum clock, 7 KB OTP program memory, 256 bytes SRAM, 16 digital I/O lines, an integrated 12-bit ADC, two analog comparators, a USART/SCI serial port, and the standard PIC16C peripheral set (Timer0/Timer1/Timer2, watchdog timer, brown-out reset, and selectable oscillator modes). The 20-pin SOIC footprint is industry standard, allowing drop-in upgrades within the PIC16C7xx family. The PIC16C771 uses Microchip's classic 14-bit RISC core with 35 single-cycle instructions, providing deterministic execution of time-critical control loops. Its 12-bit ADC (up to 8 channels on this part) and dual comparators enable direct sensor interfacing without external signal conditioning, while the USART supports asynchronous and synchronous communication with bridges or sensors. Typical applications include industrial control front-ends, sensor signal conditioning, low-cost motor control, smart battery chargers, and white-goods user interfaces. The 20 MHz throughput and rich peripheral mix also make it suitable for HVAC damper control, security keypads, and small appliance controllers. When designing with this device, ensure that OTP programming is performed before final PCB assembly, as OTP cannot be erased. Decouple VDD with 0.1 uF + 10 uF capacitors placed within 5 mm of the supply pins, and keep the MCLR pin track short to minimize ESD sensitivity. This page synthesizes distributor pricing from DigiKey, Mouser, LCSC, and Octopart, drop-in PIC16C-family alternatives in the same SOIC-20 footprint, and practical design notes that complement the manufacturer datasheet.

Angebot Kontakt

PIC16C771T-I/SS

PIC16C771T-I/SS - 8-Bit OTP MCU, 7KB, 12-bit ADC | Microchip

The Microchip Technology PIC16C771T-I/SS is a CMOS OTP-based 8-bit microcontroller in the PIC16C family, packaged in a 20-pin SSOP and operating from a 2.5V to 5.5V rail with a 20 MHz clock (200 ns instruction cycle). It integrates 7 KB of program memory (4K x 14), 256 bytes of data RAM, and a 12-bit Analog-to-Digital converter with up to 6 input channels, making it suitable for mixed-signal embedded control. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (ROM/Flash/OTP), data RAM, timers, and peripherals such as ADCs, UARTs, and I/O ports. The PIC16C architecture is a RISC design with only 35 single-word instructions, sitting within the broader taxonomy of 8-bit microcontrollers -> microcontrollers -> microcontrollers (ICs) -> integrated circuits -> semiconductors. PIC16C parts use One-Time Programmable (OTP) EPROM rather than Flash, which makes them suited for low-volume, mature, or cost-sensitive industrial designs rather than in-field reprogrammable applications. Key features of the PIC16C771T-I/SS include six channels of 12-bit ADC resolution, three timers, a USART with addressable SPI/I2C support, 16 general-purpose digital I/O pins, an 8-bit watchdog timer, in-circuit serial programming (ICSP), and 200 ns instruction execution at 20 MHz. The device's 256-byte RAM is small but adequate for state-machine and PID-loop control, while its 7 KB OTP supports roughly 4,000 instruction words. The 20-SSOP package has a 5.30 mm body width with 0.65 mm pin pitch. The PIC16C771 uses a Harvard architecture with separate program and data buses, allowing instruction fetch and operand access in a single cycle. Its NanoWatt technology provides power-managed sleep modes with wake-up on interrupt, supporting battery-backed designs. The 12-bit ADC offers 12 single-ended input channels at the package level (6 channels of 12-bit ADC as per Microchip product page text, with shared S&H) and supports both single-ended and differential conversions for sensor signal conditioning. Typical applications include industrial sensor interfaces, motor control loops, smart instrumentation, automotive body electronics, white goods control boards, and battery chargers. The combination of 12-bit ADC, PWM, and USART supports closed-loop control in systems such as HVAC thermostats, BLDC drivers, and process controllers where deterministic 8-bit execution is acceptable. When designing with the PIC16C771T-I/SS, ensure VDD decoupling with a 100 nF ceramic close to the supply pin, and reserve an MCLR pull-up if ICSP is unused. Because OTP memory cannot be erased, designers must use the JW windowed package or a Flash-equivalent (PIC16F877A/PIC16F76 family) for prototyping. This page synthesizes distributor pricing, drop-in alternatives, application examples, and design notes that go beyond the manufacturer datasheet's raw specifications, including same-family replacements and cross-brand PIC16C-Flash equivalents.

Angebot Kontakt

PIC16C771T/SO

PIC16C771T/SO - 8-Bit OTP MCU, 7KB, 12-bit ADC, SOIC-20

The Microchip Technology PIC16C771T/SO is an 8-bit CMOS OTP-based microcontroller in the PIC16C family, delivering 200 ns instruction execution and packaged in a 20-pin SOIC (0.295", 7.50 mm width) form factor. Per Microchip's official product page, the device ships with 7 KB of OTP program memory (4K x 14 words), operates from a 5 V supply, and is pin-compatible upward with the PIC16C5X and PIC12CXXX device families, easing migration for legacy designs. The "/SO" suffix denotes the SOIC-20 surface-mount package and the "T" suffix indicates tape-and-reel packaging. An 8-bit OTP microcontroller is a microprocessor that combines a CPU core, non-volatile One-Time-Programmable program memory, RAM, and peripherals on a single die. OTP devices are programmed once with a device programmer and retain their code indefinitely, which makes them economical for high-volume embedded products where firmware is stable and field re-programmability is not required. The PIC16C architecture sits within a broader hierarchy: microcontroller -> embedded controller -> integrated circuit -> semiconductor, and Microchip's PIC16C line remains one of the most widely deployed 8-bit cores in industrial control. Key features of the PIC16C771 include 35 single-word instructions, an operating speed of 20 MHz, and 6 channels of 12-bit Analog-to-Digital (A/D) conversion that deliver higher measurement resolution than the typical 8-bit ADCs found on legacy PIC16C devices. The device retains the classic PIC16C peripheral set including timers, USART, capture/compare/PWM, and a small RAM/SRAM footprint suitable for tight real-time loops. Architecturally, the PIC16C771 uses a Harvard-style RISC core with separate program and data buses, an accumulator-based ALU, and a peripheral set tuned for deterministic bit-manipulation and low-latency interrupt response. The 12-bit ADC allows direct interfacing with precision sensors, eliminating an external ADC chip and shrinking the bill of materials. The wide SOIC-20 package also exposes enough I/O for keypad, display, and serial communication interfaces in parallel. Typical applications include industrial automation controllers, sensor signal conditioning with on-chip 12-bit ADC, motor-control PWM peripherals, and legacy product retrofits where PIC16C5X source code must be ported forward. The device is also commonly used as a single-chip replacement for older PIC16C7X designs that do not require in-system Flash programmability. When designing with this OTP device, be aware that code is committed permanently after programming - any firmware bug discovered after production requires a mechanical part swap rather than a field re-flash. Plan for either factory programming only, or migrate to a pin-compatible PIC16F series Flash variant if field updates are anticipated. The PIC16C771 is recommended only when OTP cost advantages justify the loss of re-programmability. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that go beyond the manufacturer datasheet, giving engineers a single source to evaluate the PIC16C771T/SO against modern equivalents.

Angebot Kontakt

PIC16C771T/SS

PIC16C771T/SS - 8-Bit 20MHz MCU 7KB OTP 16 I/O 20-SSOP | Microchip

The Microchip Technology PIC16C771T/SS is an 8-bit CMOS OTP-based microcontroller in the PIC16C family, packaged in a 20-pin SSOP and rated for operation up to 20 MHz instruction execution. It integrates 7 KB of program memory (4K × 14) plus 256 bytes of data RAM, with 16 digital I/O pins and 6 channels of 12-bit Analog-to-Digital (A/D) conversion on-chip, delivering strong analog performance in a compact surface-mount footprint. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (ROM/Flash/OTP), data memory (RAM), and peripherals such as timers, communication ports, and ADCs. The PIC16C architecture uses a RISC-style Harvard design with 35 single-word instructions and 200 ns instruction execution at 20 MHz, which simplifies firmware development while preserving deterministic timing. PIC16C parts are OTP (One-Time Programmable) CMOS devices, historically positioned as a stepping stone between early EPROM-based PIC16C5X and later flash-based PIC16F families, and they are upwards code-compatible with PIC12CXXX and PIC16C5X devices. Key features of the PIC16C771 include a 12-bit ADC with up to 6 input channels (the highest resolution in this class at introduction), a 20 MHz maximum clock for 5 MIPS throughput, an internal oscillator option, a watchdog timer with its own on-chip RC oscillator for fail-safe operation, and an operating voltage range of 2.5 V to 5.5 V. Brown-out Reset and Power-on Reset circuits are integrated, and in-circuit serial programming is supported for development workflows. Typical applications include industrial sensor signal conditioning with high-resolution analog front ends, battery charging controllers, closed-loop fan/pump control, instrumentation front panels, and low-cost consumer products that need 12-bit ADC precision without the cost of an external converter. The combination of OTP memory, small SSOP-20 footprint, and 12-bit ADC makes it attractive where code is finalized in production. When designing with this part, note that PIC16C771 is OTP, not Flash, so firmware must be finalized before programming. Allocate sufficient ADC acquisition time and use the internal RC oscillator only when timing tolerance is non-critical. Decouple VDD/VSS with 100 nF + 10 µF capacitors placed close to the pins. This page synthesizes distributor pricing, parametric drop-in alternatives from Microchip's own PIC16 family, and practical design notes that go beyond the manufacturer datasheet to help engineers evaluate the part quickly.

Angebot Kontakt

PIC16C773-E/SP

PIC16C773-E/SP - 8-Bit 20MHz 7KB OTP MCU 12-bit ADC | Microchip

The Microchip Technology PIC16C773-E/SP is an 8-bit CMOS microcontroller from the PIC16C family, featuring 7KB (4K x 14) of One-Time-Programmable (OTP) program memory, 256 bytes of RAM, and a 12-bit Analog-to-Digital Converter with up to 6 input channels. The device executes instructions at 200 ns per instruction cycle (5 MIPS at 20 MHz clock) and is housed in a 28-pin SPDIP through-hole package. The -E suffix denotes the extended operating temperature range of -40C to +125C, suitable for industrial and harsh-environment deployments. An 8-bit microcontroller (MCU) is a programmable integrated circuit that combines a CPU, memory, and peripherals on a single die. The PIC16C architecture is a Harvard RISC design, separating program and data buses to allow simultaneous instruction fetch and operand access, which improves throughput over von-Neumann designs. Within the broader semiconductor taxonomy, the PIC16C family falls under microcontrollers, a sub-category of microprocessors and digital ICs. The 16C series uses OTP EPROM technology, meaning each chip is one-time field-programmable and retains code without a window (unlike the JW ceramic-windowed variants used for prototyping). Key features include 22 digital I/O pins, three timer/counters, a synchronous/asynchronous USART with 9-bit address detection, a 12-bit ADC with 6 channels, and a Capture/Compare/PWM (CCP) module. The integrated 12-bit ADC provides 4096 discrete steps, enabling discrimination of small analog signal changes without external signal-conditioning circuitry. Brown-out Reset (BOR) circuitry and a Watchdog Timer (WDT) with on-chip RC oscillator enhance reliability in unattended or electrically noisy environments. The device operates from 4.0V to 5.5V supply and supports In-Circuit Serial Programming (ICSP) via two pins, allowing firmware updates after PCB assembly. Typical applications include industrial process-control sensor interfaces, HVAC damper/valve actuators, multi-channel data acquisition front-ends, instrumentation panels with keypad/display, and embedded motor-control interfaces. The extended temperature range makes it suitable for outdoor or under-hood industrial environments. When designing with this device, ensure VDD decoupling includes both bulk (e.g. 10 uF) and high-frequency (100 nF) capacitors placed within 5 mm of the supply pins. For ADC accuracy, add a 10 uF + 100 nF analog supply (AVDD) bypass network. The OTP nature means firmware cannot be erased; use JW windowed parts for development cycles and only move to OTP for production runs. This page consolidates distributor pricing, parametric cross-references, and engineering design notes that go beyond the manufacturer datasheet alone.

Angebot Kontakt

PIC16C773-E/SS

PIC16C773-E/SS - 8-Bit MCU, 7KB OTP, 12-bit ADC, 28-SSOP | Microchip

The Microchip Technology PIC16C773-E/SS is an 8-bit RISC microcontroller from the PIC16C family featuring 7KB (4K x 14) of One-Time-Programmable (OTP) program memory, 256 bytes of RAM, and 22 digital I/O pins, all housed in a 28-pin Shrink Small-Outline Package (28-SSOP, 208 mil). It operates at up to 20 MHz instruction clock and integrates a 12-bit Analog-to-Digital Converter with 6 input channels, enabling high-resolution mixed-signal designs without external ADC ICs. An 8-bit microcontroller (MCU) is a small computer-on-a-chip integrating a CPU, program memory, data RAM, and peripherals on a single die. PIC microcontrollers use a Harvard RISC architecture with separate program and data buses, allowing most instructions to execute in one instruction cycle. Within the embedded systems hierarchy, the PIC16C773 belongs to the mid-range PIC16 family, sitting between baseline PIC10/12/16 devices and high-performance PIC18/dsPIC parts. The -E suffix denotes the extended operating temperature range of -40C to +125C, while /SS identifies the 28-SSOP surface-mount package. Key features include six 12-bit ADC channels with successive-approximation architecture, two 8-bit timer/counters and one 16-bit timer/counter, a synchronous serial port configurable for SPI or I2C, a USART for asynchronous serial communication, and a watchdog timer with its own on-chip RC oscillator for reliable system recovery. Brown-out-reset and power-on-reset circuitry are integrated, simplifying external reset design. The 12-bit ADC offers 4096 discrete codes, significantly finer than the 10-bit (1024 codes) ADCs found on many competing 8-bit MCUs at this price point. Typical applications include industrial process control loops, sensor signal conditioning, battery management systems, motor control front-ends, instrumentation front panels, and white-goods appliance controllers. The integrated 12-bit ADC reduces BOM cost in transducer and sensor-interface designs, while the OTP program memory suits high-volume cost-sensitive products where firmware is finalised at production. When designing with this device, pay attention to the OTP memory limitation: firmware cannot be updated in the field. For prototyping or products needing firmware revisions, consider the pin-compatible PIC16F877 (Flash) variant from Microchip. Ensure the 28-SSOP land pattern matches your PCB layout and that the VDD/VSS decoupling network follows the manufacturer reference schematic.

Angebot Kontakt

PIC16C773-I/SS

PIC16C773-I/SS - 8-Bit 20MHz 7KB OTP MCU 12-bit ADC | Microchip

The Microchip Technology PIC16C773-I/SS is a peripheral-rich 8-bit CMOS microcontroller based on the PIC® 16C architecture, featuring 7KB (4K x 14) of One-Time-Programmable (OTP) program memory, 256 bytes of RAM, and 22 digital I/O pins, all integrated in a 28-pin SSOP package. It executes instructions in 200 ns at a 20 MHz clock rate, providing 5 MIPS of throughput with only 35 single-word instructions for ease of programming. An 8-bit microcontroller is a small computing system-on-chip that integrates a CPU, program memory, RAM, and peripheral interfaces into a single IC. Within the broader taxonomy, the PIC16C773 belongs to the Microchip PIC16C family of mid-range microcontrollers, which sit between the baseline PIC10/12/16 families and the high-performance PIC18/PIC24 families, and are widely used in industrial control, instrumentation, and embedded sensor applications. Key features include 6 channels of 12-bit Analog-to-Digital conversion with multiple input ranges, two 8-bit timers plus one 16-bit timer/counter, a Synchronous Serial Port (SSP) configurable for SPI or I2C, a USART with 9-bit address detection, a 10-bit Pulse-Width-Modulation (PWM) module, a capture/compare/PWM (CCP) module, an 8-bit parallel slave port, and a watchdog timer with on-chip RC oscillator for reliable operation. The device also integrates brown-out reset, power-on reset, and in-circuit serial programming for robust embedded designs. Built on Microchip's low-power CMOS process, the PIC16C773 delivers typical active current around 2 mA at 5V/4 MHz and supports standby currents below 1 µA, making it suitable for battery-backed applications. The 28-pin SSOP (5.30 mm body) footprint supports compact PCB layouts, and the wide 2.5 V to 5.5 V operating range allows direct interfacing with both 3.3 V and 5 V peripherals. Typical applications include industrial process control, sensor signal conditioning, instrumentation and data acquisition, automotive body and chassis subsystems (non-safety), and consumer white goods. The integrated 12-bit ADC eliminates the need for an external precision converter, reducing BOM cost in measurement-focused designs. When designing with this part, remember the OTP program memory cannot be re-programmed in-circuit beyond the ICSP window - choose the Flash-based PIC16F876 (pin-compatible drop-in) for prototype iteration, or remain on PIC16C773 for low-cost volume production where firmware is finalized.

Angebot Kontakt

PIC16C773/JW

PIC16C773/JW - 8-Bit 20MHz 7KB OTP MCU w/ 12-bit ADC | Microchip

The Microchip PIC16C773/JW is an 8-bit CMOS RISC microcontroller in a windowed 28-pin CERDIP package, featuring 7KB of UV-erasable EPROM program memory (4K x 14), 256 bytes of RAM, and 22 digital I/O lines. It integrates a 12-bit Analog-to-Digital converter with up to 6 input channels and runs at 20 MHz with a 200 ns instruction cycle. An 8-bit microcontroller is a microprocessor optimized for embedded control that combines a CPU, memory (program + data), and peripherals on a single die. PIC microcontrollers use a Harvard architecture RISC core (Reduced Instruction Set Computer) and sit inside the broader taxonomy: MCU -> microcontroller -> embedded processor -> semiconductor. The PIC16C family represents Microchip's mid-range 8-bit portfolio, positioned between baseline (PIC10/12) and high-performance (PIC17/18) tiers. The PIC16C773/JW delivers 35 single-word instructions, of which only program branches take two cycles; all others execute in a single 200 ns cycle at 20 MHz. The 12-bit ADC with 6 channels provides a resolution step of approximately 0.8 mV at the 5V full-scale range, eliminating external analog signal conditioning in many measurement applications. Internal peripherals include one 8-bit timer/counter (Timer0) and one 16-bit timer/counter (Timer1), plus a Watchdog Timer with its own on-chip RC oscillator. Architecturally, the device uses a 14-bit program-memory word width with a 13-bit instruction set, addressing up to 8K x 14 of program space and 368 bytes of general-purpose RAM plus 4-byte SFR page. The windowed CERDIP (JW suffix) allows UV erasure for prototyping and code-development workflows, making this part especially attractive in design labs where firmware iteration is needed before transitioning to OTP (One-Time-Programmable) plastic-package versions for production. Typical applications include industrial process control loops, precision instrumentation, smart sensor signal conditioning, motor control feedback sampling, and medical measurement devices that benefit from on-chip 12-bit ADC accuracy. The 256-byte RAM ceiling suits small state-machine and data-logging workloads rather than protocol-stack-heavy applications. When designing with the PIC16C773/JW, note that the windowed CERDIP package is intended for development, not high-volume production; consider PIC16C773-I/SP or PIC16C773T-I/SO for cost-optimized plastic-package drop-ins. Also budget for the external quartz crystal or resonator (typically 4-20 MHz) and ensure the analog AVdd pin is properly decoupled to maximize ADC performance. This page synthesizes distributor pricing snapshots, same-family drop-in alternatives, and practical design guidance that go beyond what is printed on the Microchip datasheet, giving engineers a single reference for selection and replacement decisions.

Angebot Kontakt

Unterkategorien

Produkte (38.000+)

PIC16C77-20I/PT - 8-Bit 20MHz OTP MCU 14KB Flash | TQFP-44

PIC16C770-E/P - 8-Bit 20MHz 3.5KB OTP MCU 20-PDIP | Microchip

PIC16C770-E/SS - 8-bit OTP MCU, 3.5KB, 16 I/O, 20-SSOP | Microchip

PIC16C770-I/SO - 8-Bit CMOS MCU, 20MHz, 3.5KB OTP | Microchip

PIC16C770-I/SS - 8-Bit MCU, 20MHz, 3.5KB OTP, 12-bit ADC | Microchip

PIC16C770/JW - 20MHz 8-bit OTP MCU w/ 12-bit ADC | Microchip

PIC16C770/SS - 8-Bit 20MHz 3.5KB OTP MCU | Microchip | 20-SSOP

PIC16C770T-E/SS - 8-Bit 20MHz PIC MCU 3.5KB OTP | Microchip

PIC16C770T/SO - 8-Bit OTP MCU, 20MHz, 3.5KB, 12-bit ADC | Microchip

PIC16C771-E/P - 8-Bit 20MHz OTP MCU with 12-bit ADC | Microchip

PIC16C771-E/SO - 8-bit OTP MCU, 7KB, 12-bit ADC | Microchip

PIC16C771-E/SS - 8-bit MCU, 7KB OTP, 12-bit ADC | Microchip

PIC16C771-I/SS - 8-bit 20MHz MCU, 7KB OTP, 12-bit ADC | Microchip

PIC16C771/JW - 8-Bit 20MHz 7KB EPROM MCU w/ 12-bit ADC | Microchip

PIC16C771T-E/SO - 8-bit 20MHz MCU 7KB OTP 20-SOIC | Microchip

PIC16C771T-E/SS - 8-Bit 20MHz MCU, 7KB OTP, 20-SSOP | Microchip

PIC16C771T-I/SO - 8-Bit 20MHz OTP MCU 7KB | Microchip

PIC16C771T-I/SS - 8-Bit OTP MCU, 7KB, 12-bit ADC | Microchip

PIC16C771T/SO - 8-Bit OTP MCU, 7KB, 12-bit ADC, SOIC-20

PIC16C771T/SS - 8-Bit 20MHz MCU 7KB OTP 16 I/O 20-SSOP | Microchip

PIC16C773-E/SP - 8-Bit 20MHz 7KB OTP MCU 12-bit ADC | Microchip

PIC16C773-E/SS - 8-Bit MCU, 7KB OTP, 12-bit ADC, 28-SSOP | Microchip

PIC16C773-I/SS - 8-Bit 20MHz 7KB OTP MCU 12-bit ADC | Microchip

PIC16C773/JW - 8-Bit 20MHz 7KB OTP MCU w/ 12-bit ADC | Microchip