Integrierte Schaltungen

PIC16F1613-E/ST

PIC16F1613-E/ST - 8-bit 32MHz XLP MCU 3.5KB Flash | Microchip

The Microchip Technology PIC16F1613-E/ST is an 8-bit PIC microcontroller from the PIC16F XLP family, featuring 3.5KB (2K x 14 words) of Flash program memory, 256 bytes of RAM, and a 32MHz internal oscillator, housed in a 14-pin TSSOP (ST) package rated for the -40C to +125C extended industrial temperature range (E suffix). An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals on one silicon die. The PIC16F architecture uses a RISC-based Harvard structure with a 14-bit instruction word optimized for deterministic real-time control. PIC MCUs belong to the broader microcontrollers > integrated circuits > semiconductors product hierarchy and are widely used in embedded control where low power, deterministic behavior, and small footprints are essential. The XLP (eXtreme Low Power) designation indicates sub-uA/MHz active currents and deep-sleep currents suitable for battery-powered and energy-harvesting designs. Key features include a 10-bit Analog-to-Digital Converter (ADC) with computation, up to 8-channel input multiplexing, Capture/Compare/PWM (CCP) peripherals, a 24-bit Signal Measurement Timer (SMT), Zero-Cross Detection, configurable logic cells (CLC), and a peripheral pin select (PPS) system. The device supports up to 32MHz CPU clock, a wide 2.3V to 5.5V operating voltage, and nanoWatt XLP sleep modes that drop quiescent current to the nanoampere range. Technically, the device uses an enhanced mid-range core with hardware multiply and a 16-level hardware stack, 256 bytes of EEPROM data memory, an Enhanced Universal Synchronous/Asynchronous Receiver/Transmitter (EUSART), two MSSP peripherals (I2C/SPI), and on-chip debug support via ICD. The 14-pin TSSOP package offers a small 4.4mm body width compatible with hand-soldered prototypes and high-density boards. Typical applications include small motor control (low-cost BLDC and brushed DC), LED lighting drivers, household appliances, IoT sensor nodes, capacitive-touch user interfaces (via mTouch), smoke detectors, and consumer white goods. The combination of 24-bit SMT, zero-cross detect, and CCP makes the PIC16F1613 particularly suited to closed-loop motor and lighting control without external timers. When designing with this MCU, plan for decoupling caps on VDD/AVDD and follow EOC access ports for in-circuit programming. The PPS block requires careful pin remapping configuration in software; verify peripheral-to-pin mappings in Microchip's MPLAB Xpress / MCC code configurator before PCB layout sign-off. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt

PIC16F1613-I/ML

PIC16F1613-I/ML - 8-Bit MCU, 3.5KB Flash, 32MHz, 16-QFN | Microchip

The Microchip Technology PIC16F1613-I/ML is an 8-bit PIC16F microcontroller featuring 3.5KB (2K x 14) of Flash program memory, 256 bytes of RAM, and a 32 MHz internal oscillator, all housed in a 16-pin QFN (4x4 mm) package with an exposed thermal pad. It belongs to the PIC16(L)F161X family designed for embedded control of small motors and general-purpose applications. A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory (Flash), volatile data memory (RAM), and a rich set of integrated peripherals such as timers, ADCs, and communication interfaces. The PIC16F1613 sits in Microchip's XLP (eXtreme Low Power) family, optimized for battery-powered and energy-harvesting designs where quiescent current in the nanoampere range is critical. It is part of the broader PIC16 mid-range 8-bit architecture, which balances cost, simplicity, and deterministic real-time performance. Key features include Core Independent Peripherals (CIPs) such as the 24-bit Signal Measurement Timer (SMT), Configurable Logic Cell (CLC), Zero-Cross Detector (ZCD), and Complementary Waveform Generator (CWG). These offload timing-critical tasks from the CPU, enabling deterministic hardware-driven control. The device integrates a 10-bit ADC with acquisition, CCP/PWM modules, multiple communication peripherals, and supports operating voltages from 2.5V to 5.5V across -40C to +85C industrial temperature range. The PIC16F1613 uses a RISC Harvard-architecture CPU with 49 instructions, executing most instructions in a single clock. With a 32 MHz internal oscillator it delivers 8 MIPS throughput. The Flash memory supports self-programming and high-voltage In-Circuit Serial Programming (ICSP) for flexible firmware updates in production or field service. Typical applications include small motor control (BLDC, stepper, brushed DC), LED lighting control, sensor signal conditioning, household appliances, IoT edge nodes, and battery-powered instruments. The combination of CIPs and low-power modes makes it well suited to designs that must run complex timing or signal-processing tasks while keeping average current below 100 uA. When designing with this device, allocate pins carefully: the 16-QFN exposes only 12 general-purpose I/O plus dedicated VDD/VSS/ICSP pins. Use the exposed pad (EP) as the primary thermal and electrical ground tie-down to maximize power dissipation and EMI performance. Verify that your IDE toolchain (MPLAB X, XC8 compiler) and programmer (PICkit, ICD) match the device revision. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, supporting engineers in component selection and procurement.

Angebot Kontakt

PIC16F1613-I/P

PIC16F1613-I/P - 8-bit MCU, 3.5KB Flash, 32MHz | Microchip

The Microchip Technology PIC16F1613-I/P is an 8-bit PIC microcontroller delivering 3.5KB Flash program memory, 256 bytes RAM, and a maximum CPU clock of 32MHz in a 14-pin PDIP through-hole package. It belongs to the PIC16F161X family and provides unique on-chip peripherals for embedded control of small motors and general-purpose applications, including a 10-bit A/D converter, CCP module, 24-bit Signal Measurement Timer, Zero-Cross Detector, and Complementary Waveform Generator. A microcontroller (MCU) is an integrated circuit that combines a CPU core, volatile and non-volatile memory, and configurable peripherals on a single silicon die. Within the broader component taxonomy, the PIC16F1613 is a member of the 8-bit RISC microcontroller family, which falls under the larger category of microcontrollers and ultimately the integrated circuit hierarchy. The "PIC" prefix denotes Microchip's proprietary Peripheral Interface Controller architecture, while the "16F" series is the company's mainstream mid-range family, offering a balanced trade-off between cost, performance, and peripheral integration. Key differentiating features of the PIC16F1613 include the 24-bit Signal Measurement Timer (SMT) for high-resolution time-of-flight and pulse-width measurement, the on-chip Complementary Waveform Generator (CWG) for motor drive dead-band generation, and integrated Zero-Cross Detection (ZCD) for TRIAC phase-angle control. The device operates from 2.3V to 5.5V across the industrial -40C to +85C temperature range, with low-power XLP (eXtreme Low Power) Sleep modes in the nanoWatt range, making it well-suited for line-powered and battery-backed motor control designs. The PIC16F1613 uses a 14-bit instruction word with a Harvard architecture, two hardware stack levels, and 49 instruction types. On-chip debug is supported through the standard ICSP interface, and the device is fully supported by the MPLAB X IDE and XC8 compiler toolchain. Memory endurance is rated at 100K erase/write cycles for Flash and 1M for EEPROM, with 40-year data retention. Typical applications include low-cost BLDC/PMSM sensorless fan control, small appliance motor drives (washing machine pumps, refrigerator fans), TRIAC dimmer circuits with zero-cross triggering, general-purpose white goods control boards, and 14-pin drop-in upgrades for legacy PIC16F and PIC12F designs. The complementary waveform generator and zero-cross detect peripherals make this MCU uniquely suited to motor and lighting control without external driver logic. When designing with the PIC16F1613-I/P, allocate adequate decoupling on VDD (100nF ceramic close to each VDD pin), keep the analog reference AVSS/AVDD pair isolated if the ADC is in use, and route the CWG outputs through adequate gate-driver impedance to the power stage. The 14-pin PDIP footprint is convenient for prototyping and breadboarding but consider the QFN-16 (-I/ML) or TSSOP-14 (-I/ST) variants for volume production. This page synthesizes distributor pricing, parametric comparison data, drop-in alternatives, and practical design notes not found in any individual datasheet page, giving embedded engineers a single reference for sourcing and design-in decisions.

Angebot Kontakt

PIC16F1613-I/SL

PIC16F1613-I/SL - 8-Bit 32MHz MCU 3.5KB Flash | Microchip

The Microchip Technology PIC16F1613-I/SL is an 8-bit PIC16 microcontroller built on Microchip's enhanced mid-range core, delivering 32 MHz CPU performance with 3.5 KB (2K x 14) of Flash program memory in a 14-pin SOIC package. The device integrates 256 bytes of SRAM, a high-precision 32 MHz internal oscillator, a 10-bit Analog-to-Digital Converter (ADC), a 5-bit Digital-to-Analog Converter (DAC), Capture/Compare/PWM (CCP) modules, 24-bit Signal Measurement Timer (SMT), Zero-Cross Detect, and Complementary Waveform Generator (CWG) peripherals tailored for embedded control of small motors and general-purpose applications. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash, SRAM), peripherals (ADC, timers, communication blocks), and I/O onto one die. Within Microchip's PIC® family hierarchy, this part belongs to the PIC16F1xxx enhanced mid-range class, which sits between the baseline PIC10/12/14 family and the 16-bit dsPIC®/PIC24 family. The PIC16F1613's XLP™ (eXtreme Low Power) technology targets battery-friendly designs, drawing currents in the microamp range during sleep. Key features of the PIC16F1613-I/SL include: 14 SOIC package for through-hole-style surface-mount assembly on standard 0.154-inch SOIC land patterns; operating voltage range of 2.3V to 5.5V (F-version); up to 32 MHz internal oscillator with ±1% typical accuracy; on-chip 10-bit ADC with up to 8 channels; 5-bit DAC; and Core Independent Peripherals (CIPs) that offload tasks from the CPU. The -I suffix denotes the industrial temperature grade (-40°C to +85°C). Technically, the PIC16F1613 uses a 14-bit instruction word architecture with single-cycle execution except for branches. Its CWG and SMT peripherals enable closed-loop motor control without CPU intervention, making the device attractive for small BLDC and stepper designs. The internal 32 MHz oscillator eliminates external crystals in many applications, reducing BOM cost and PCB area. Typical applications include small motor control (fans, pumps, appliance drives), LED lighting controllers, sensor signal conditioning, battery-powered IoT nodes, and general-purpose embedded control in consumer and industrial products. The XLP low-power modes also make it suitable for energy-harvesting or remote-sensor designs. When designing with the PIC16F1613, observe the 2.3V minimum VDD at 16 MHz (higher frequencies may require higher VDD). Provide adequate bulk decoupling on VDD and use Microchip's MPLAB X IDE with XC8 compiler for development. The 14-pin SOIC footprint is compatible with many legacy PIC16F parts, simplifying board-level migration. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers compare, select, and source the PIC16F1613-I/SL with confidence.

Angebot Kontakt

PIC16F1613-I/ST

PIC16F1613-I/ST - 8-Bit MCU, 32MHz, 3.5KB Flash, XLP | Microchip

The Microchip Technology PIC16F1613-I/ST is an 8-bit PIC® XLP™ flash microcontroller with 3.5KB (2K x 14 words) of program memory, 256 bytes of RAM, and a maximum CPU clock of 32MHz, housed in a 14-pin TSSOP package. It operates from 2.3V to 5.5V across the industrial -40C to +85C temperature range, and integrates a 10-bit A/D converter, Capture/Compare/PWM (CCP) modules, a 24-bit Signal Measurement Timer (SMT), zero-cross detection, and peripheral pin select for flexible signal routing. An 8-bit microcontroller (MCU) is a single-chip computer that combines a CPU, program memory (Flash), data memory (RAM), and peripherals on one die. Within the broader semiconductor taxonomy, an MCU is a subset of microcontrollers, which in turn belong to the embedded processor class of integrated circuits. PIC microcontrollers use a RISC architecture with a small, fixed instruction set optimized for deterministic real-time control in cost- and power-sensitive embedded designs. The "XLP" (eXtreme Low Power) designation indicates Microchip's family of nanoWatt technology parts with sub-uA sleep currents for battery-powered applications. Key differentiating features include the integrated 24-bit SMT for high-resolution time-of-flight, angle, or duty-cycle measurement in motor and lighting control, and on-chip zero-cross detect for TRIAC-based AC dimming without external zero-cross circuitry. The peripheral pin select (PPS) mapper allows remapping of digital peripherals to multiple I/O pins, simplifying PCB layout. With eXtreme Low Power (XLP) technology, the device typically consumes <30 nA in sleep with brown-out reset enabled, making it well-suited for always-on, battery-backed, or energy-harvesting systems. The PIC16F1613 uses an enhanced mid-range 8-bit RISC core with a hardware multiplier, 16-level stack, and a 49-instruction set optimized for C and assembly development under MPLAB X IDE with the XC8 compiler. In-circuit debugging is supported via the two-wire ICD interface, and in-circuit serial programming (ICSP) allows firmware updates after PCB assembly. The 10-bit ADC supports up to 8 channels with an internal fixed voltage reference and a sample-and-hold front end. Typical applications include small brushed-DC and stepper motor control, LED lighting with TRIAC dimming, capacitive-touch user interfaces, sensor signal conditioning, general-purpose digital I/O expansion, and low-power IoT edge nodes. The TSSOP-14 footprint makes it attractive where PCB area is constrained and pin count beyond 8 is needed. When designing with this part, plan current budget for active and sleep modes against battery capacity, place a 0.1 uF decoupling capacitor within 5 mm of VDD, and reserve one I/O pin as ICSPCLK/ICSPDAT for in-circuit serial programming. Note that the PIC16F1613 has 14 pins; if more I/O is required, the PIC16F1613 family also offers 8- and 16-pin variants on the same silicon, with code compatibility preserved. This page synthesizes distributor pricing for the PIC16F1613-I/ST, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.

Angebot Kontakt

PIC16F1613T-I/SL

PIC16F1613T-I/SL - 8-bit MCU, 32MHz, 3.5KB Flash, 14-SOIC | Microchip

The Microchip Technology PIC16F1613T-I/SL is an 8-bit PIC16 microcontroller from the PIC XLP 16F family, delivering 32 MHz CPU performance with 3.5 KB (2K x 14 words) of Flash program memory and an internal high-speed oscillator, housed in a 14-pin SOIC (SL) tape-and-reel package. The T-suffix indicates tape and reel packaging, the I-suffix denotes the industrial temperature grade (-40C to +85C), and SL is the 14-pin narrow-body SOIC package code. According to the Microchip product page, this device belongs to the PIC16(L)F161X family that delivers on-chip features targeted at small motor and general-purpose embedded control applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, volatile RAM, digital I/O, and on-chip peripherals such as timers, ADC, and communication interfaces. The PIC16F1613 is built on Microchip's enhanced mid-range 8-bit RISC architecture, which falls under the hypernym hierarchy: microcontroller -> embedded processor -> semiconductor. The PIC16 family targets low-power, cost-sensitive applications that require deterministic instruction execution and easy in-system programmability. Key features include 3.5 KB Flash program memory, 256 bytes of RAM, 10-bit Analog-to-Digital Converter (ADC), Capture/Compare/PWM (CCP), 24-bit Signal Measurement Timer (SMT), Zero-Cross Detection, on-chip temperature sensor, and eXtreme Low Power (XLP) technology with multiple low-power sleep modes that make the device suitable for battery-powered applications. The 32 MHz internal oscillator eliminates the need for an external crystal in many designs. In the system design hierarchy, the PIC16F1613 operates at 2.5 V / 3.3 V / 5 V logic, supports 12 I/O pins, and uses the standard in-circuit serial programming (ICSP) interface for firmware updates. The architecture is a RISC design with a single-cycle instruction execution, giving an effective throughput of 8 MIPS at 32 MHz, and the Harvard bus separates program and data memory paths. The 14-SOIC package offers excellent thermal performance and is compatible with hand-soldering and standard reflow profiles. Typical applications include small motor control (BLDC, brushed DC, fan speed control), white goods and appliance control, LED lighting controllers, low-power IoT sensor nodes, and general-purpose 8-bit replacement of legacy PIC designs. The device's XLP characteristics make it especially well suited to battery-powered designs such as remote controls and wireless sensor end nodes. When designing with this part, place a 0.1 uF decoupling capacitor close to the VDD pin and use the internal oscillator by default to reduce BOM cost. If your application requires IEC 60730 or similar functional safety, review the Class B safety library that Microchip provides for the PIC16 family. This page synthesizes distributor pricing, drop-in alternatives, and design notes not found in the manufacturer datasheet, helping procurement and engineering teams make a faster, more confident decision.

Angebot Kontakt

PIC16F1614-E/ML

PIC16F1614-E/ML - 8-bit 32MHz 7KB Flash MCU | Microchip | QFN-16

The Microchip Technology PIC16F1614-E/ML is an 8-bit PIC16 microcontroller from the PIC16(L)F161x family, featuring 7 KB (4K x 14 words) of Flash program memory, 32 MHz internal oscillator operation, and a 16-pin QFN package with exposed thermal pad. The part integrates on-chip peripherals unique to small motor control and general-purpose embedded designs, including a 10-bit ADC, Capture/Compare/PWM (CCP), 24-bit Signal Measurement Timer (SMT), Zero-Cross Detect, and the eXtreme Low Power (XLP) picoPower technology for energy-conscious applications. An 8-bit microcontroller (MCU) is a programmable processor that fetches instructions from internal Flash, executes them on an 8-bit data path, and interfaces with the physical world through on-chip peripherals such as ADCs, timers, PWM modules, and communication controllers. Within the broader taxonomy, the PIC16F1614 sits in the category hierarchy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. Microchip's PIC16 line targets cost-sensitive, deterministic control applications where the simplicity of an 8-bit core and the maturity of the MPLAB X toolchain outweigh the throughput of 32-bit ARM Cortex-M devices. Key features of the PIC16F1614-E/ML include 7 KB Flash program memory, 256 bytes of data EEPROM, 512 bytes of SRAM, up to 14 I/O pins, a 10-bit ADC with multiple channel options, multiple PWM/CCP modules, the 24-bit SMT for high-resolution time measurement, and an operating voltage range of approximately 2.3 V to 5.5 V. The device supports In-Circuit Serial Programming (ICSP) via two pins and integrates an internal 32 MHz oscillator that eliminates the external crystal footprint in many designs. The architecture is built on Microchip's enhanced mid-range 8-bit core with a 14-bit instruction word, single-cycle execution for most instructions (excluding branches), and a hardware multiplier. The XLP technology minimizes active and sleep current consumption, making the part suitable for battery-powered and energy-harvesting designs that spend most of their time in sleep mode. Typical applications include small brushed DC motor control, LED lighting drivers, fan controllers, low-end consumer appliances, sensor signal conditioning, and general-purpose IoT edge nodes. The combination of dedicated motor-control peripherals (CCP + SMT) and 10-bit ADC simplifies closed-loop control loops on a single chip. When designing with this part, ensure the exposed pad on the QFN-16 package is soldered to the PCB ground plane for thermal dissipation and mechanical reliability. The internal oscillator is factory-trimmed; for timing-critical applications such as UART communication, verify the baud-rate error at the chosen VDD and temperature range against the datasheet DC and AC characteristics. This page synthesizes distributor pricing from DigiKey, Mouser, and Octopart, identifies drop-in same-package alternatives from Microchip's own PIC16 portfolio, and provides practical design notes that are not found in the manufacturer datasheet alone.

Angebot Kontakt

PIC16F1614-E/P

PIC16F1614-E/P - 8-Bit MCU, 7KB Flash, 32MHz | Microchip

The Microchip PIC16F1614-E/P is an 8-bit PIC16 microcontroller featuring 7KB Flash program memory and 32MHz internal oscillator speed, housed in a 14-pin PDIP through-hole package. The -E temperature grade designates industrial range from -40C to +125C operation. It belongs to the PIC16F161X family which integrates a 10-bit ADC, Capture/Compare/PWM (CCP), 24-bit Signal Measurement Timer (SMT), Zero-Cross Detection, and Math Accelerator peripherals. An 8-bit microcontroller (MCU) is a single-chip computer that combines a CPU core, program memory (Flash), data memory (RAM), and integrated peripherals on one silicon die. PIC microcontrollers use a RISC-based Harvard architecture where program and data memory have separate buses, enabling single-cycle instruction execution at the oscillator frequency divided by 4. Within the broader semiconductor taxonomy, an MCU sits under microcontroller -> embedded processor -> digital IC -> semiconductor. Key features include 7KB (4K x 14 words) of self-programmable Flash, 512 bytes SRAM, 256 bytes EEPROM, an enhanced mid-range 16-bit instruction set, and XLP (eXtreme Low Power) technology for sleep currents in the microamp range. The device operates from 2.5V to 5.5V and integrates Core Independent Peripherals such as CWG, NCO, and DSM that offload timing-critical functions from the CPU. The 24-bit SMT peripheral enables precision time/frequency measurement of digital signals, supporting tachometer, RPM sensing, and capacitive touch decoding applications without CPU overhead. The integrated Math Accelerator executes 32-bit signed/unsigned multiplication and division in hardware, accelerating closed-loop control loops relative to firmware-based math. Typical applications include small DC motor and BLDC closed-loop control, fan speed controllers, LED lighting drivers with dimming, sensor signal conditioning, and general-purpose embedded control in industrial and consumer appliances. The 14-pin PDIP package simplifies breadboard prototyping and through-hole assembly for low-volume production. When designing with this device, allocate pin budget carefully: only 14 pins are available and several are shared between analog inputs and digital I/O. Decouple VDD with at least 100nF plus 10uF bulk capacitance placed within 5mm of the supply pins, and use the PPS (Peripheral Pin Select) feature to remap peripherals when needed.

Angebot Kontakt

PIC16F1614-E/SL

PIC16F1614-E/SL - 8-Bit MCU, 7KB Flash, 32MHz | Microchip

The Microchip Technology PIC16F1614-E/SL is an 8-bit PIC microcontroller from the PIC16F161x family, featuring 7KB (4K x 14) of Flash program memory and 512 bytes of SRAM in a 14-pin SOIC package. It operates at up to 32MHz clock speed with 10-bit ADC capability, and supports an operating voltage range suitable for battery-powered and low-power designs via Microchip's eXtreme Low Power (XLP) technology. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash/ROM), data memory (RAM), and programmable peripherals such as timers, ADC, communication interfaces, and GPIO. Within the broader semiconductor taxonomy, an 8-bit MCU sits under microcontroller -> embedded processor -> integrated circuit. The PIC16F161x series specifically targets embedded control of small motors and general-purpose applications in 8/14/20-pin packages, integrating features such as 10-bit A/D, Capture/Compare/PWM (CCP), 24-bit Signal Measurement Timer (SMT), Zero-Cross Detection, and Complementary Waveform Generator for power-conversion control loops. Key differentiating features of the PIC16F1614-E/SL include on-chip 10-bit ADC with computation, hardware limit timers for synchronous motor control, support for up to 32MHz internal oscillator operation, and integrated peripherals that reduce external component count. The -E (extended) temperature grade supports -40C to +125C operation, enabling industrial and automotive under-hood applications. The XLP technology delivers low-power Run and Sleep currents that suit battery-powered edge devices with multi-year lifetime requirements. The architecture uses a Harvard RISC core with a single-cycle instruction pipeline and hardware multiplier-free instruction set, achieving deterministic interrupt response and fast context switching. On-chip peripherals are routed through Microchip's Peripheral Pin Select (PPS) subsystem, giving flexibility in PCB layout when migrating between 8, 14, and 20-pin variants within the PIC16F161x family. Typical applications include small BLDC/PMSM motor control (fans, pumps, appliance blowers), LED lighting drivers with analog dimming, sensor interface boards, and general-purpose IoT edge nodes where 7KB Flash and 512B RAM are sufficient. The Zero-Cross Detection and 24-bit SMT simplify TRIAC-dimming and energy-metering front ends. When designing with the PIC16F1614-E/SL, ensure the ICSP programming pins are accessible on the PCB and that VDD decoupling uses a 100nF ceramic placed within 5mm of the supply pin. For analog accuracy, configure the ADC with adequate acquisition time per the datasheet's impedance guidelines. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, providing a single reference for sourcing, replacement, and engineering decisions.

Angebot Kontakt

PIC16F1614-E/ST

PIC16F1614-E/ST - 8-bit 32MHz 7KB Flash MCU 14-TSSOP | Microchip

The Microchip Technology PIC16F1614-E/ST is an 8-bit Flash microcontroller from the PIC16(L)F161X family, delivering 32 MHz CPU performance with 7 KB (4K x 14) of Flash program memory and 512 bytes of SRAM, packaged in a 14-pin TSSOP (Thin Shrink Small Outline, 4.40 mm body width) industrial-temperature-range variant. A microcontroller (MCU) is an integrated circuit combining a CPU core, program memory, data memory, and configurable peripherals on a single die. Within the semiconductor hierarchy, the PIC16F1614 belongs to the 8-bit MCU class, the PIC16 family, and the broader PIC® XLP™ (eXtreme Low Power) product line. These MCUs target low-power and mixed-signal embedded applications in 8/14/20-pin packages where small form factor, on-chip peripherals, and standby current minimization are essential. Key features include a hardware 10-bit ADC with multiple channel options, Capture/Compare/PWM (CCP) peripherals, a 24-bit Signal Measurement Timer (SMT) for precise period/pulse measurement, Zero-Cross Detection (ZCD), and on-chip Complementary Waveform Generator (CWG) peripherals intended for motor-control and lighting applications. The device integrates a configurable Logic Cell, multiple timers, and serial peripherals supporting I2C, SPI, and EUSART communication, with XLP sleep current typically in the nanoamp range to extend battery life in low-duty-cycle systems. Architecturally, the PIC16F1614 uses an enhanced mid-range 8-bit core with a 14-bit instruction word, a single-cycle hardware multiply, and a vectored interrupt controller supporting prioritized events. The industrial -40C to +125C operating range (-E suffix) makes it suitable for harsh-environment deployments, while the 14-pin TSSOP footprint offers thermal headroom and hand-solder-friendly lead pitch. Internal oscillator calibration and on-chip voltage reference options reduce external component count. Typical applications include small DC motor and fan speed control, LED lighting ballast control with dimming, fan RPM measurement via 24-bit SMT, household appliance control boards, general-purpose sensor hubs, and IoT edge nodes where XLP sleep modes preserve coin-cell battery life. The 14-pin TSSOP package suits compact PCBAs with limited board area. When designing with the PIC16F1614-E/ST, ensure the supply decoupling network uses a 100 nF ceramic capacitor within 5 mm of VDD and a bulk 1 uF or larger tantalum/ceramic capacitor; place the decoupling reference (AVDD/AVSS) bypass capacitor close to the analog pins to preserve ADC accuracy. Avoid routing high-frequency switching traces adjacent to the ADC reference pins to prevent digital noise coupling into measurement channels. This page synthesizes distributor pricing, drop-in package-compatible alternatives, and practical design notes not found in the manufacturer datasheet alone, providing a focused reference for procurement, design, and qualification decisions.

Angebot Kontakt

PIC16F1614-I/ML

PIC16F1614-I/ML - 8-bit MCU, 7KB Flash, 32MHz, 16-QFN | Microchip

The Microchip Technology PIC16F1614-I/ML is an 8-bit RISC Flash microcontroller from the PIC16 (L)F161x family, featuring 7 KB of program Flash, 512 bytes of RAM, and 32 MHz maximum CPU clock, housed in a 16-pin QFN (4x4 mm) package with an exposed thermal pad. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit data path, integrating a CPU, non-volatile program memory (Flash), volatile data memory (RAM), and on-chip peripherals such as timers, ADC, communication interfaces, and I/O. The PIC16F1614 belongs to the eXtreme Low Power (XLP) PIC16F family from Microchip, targeting compact, low-power embedded control with motor-control-oriented peripherals such as CCP, 24-bit Signal Measurement Timer (SMT), Zero-Cross Detect, and Configurable Logic Cells (CLC) — features that place this MCU in the broader category of microcontrollers -> embedded controllers -> semiconductors. The PIC16F1614 integrates a 10-bit ADC with computation (ADC2), two PWM channels, two comparators, two CLCs, and a wide 1.8 V to 5.5 V operating range that supports 2.5 V / 3.3 V / 5 V systems. According to the Microchip product page, the device delivers on-chip features unique to embedded control of small motors and general-purpose applications in 8 / 14 / 20-pin variants, with the I/ML package representing the 14/16-pin QFN option. Peripherals communicate through PPS (Peripheral Pin Select) on most pins, simplifying PCB routing in compact designs. The core uses Microchip's enhanced mid-range 8-bit CPU with hardware stack and 14-bit instruction word, executing most instructions in a single cycle. Internal oscillator options (HFINTOSC up to 32 MHz with PLL, LFINTOSC 31 kHz) reduce external component count and enable rapid prototyping. The device's XLP features — nanoWatt XLP sleep currents below 50 nA typical, IDLE/DOZE current management, and ultra-low-power wake — make it well-suited to battery-powered nodes that spend most of their life in sleep. Typical applications include BLDC / brushed-DC small-motor control, LED lighting drivers with zero-cross dimming, fan and pump control, sensor-interface front-ends with on-chip signal conditioning, and general-purpose 8-bit embedded control where footprint, BOM count, and power budget dominate the BOM. The 4x4 mm QFN fits compact PCBs in space-constrained appliances and IoT edge nodes. When designing with this device, allocate the PPS remap early in firmware planning because most digital peripherals can be routed to multiple pins. Always check that the chosen ADC channel and PWM output do not collide on the same physical pin, and provide a 0.1 µF + bulk decoupling pair adjacent to the VDD pin. This page synthesizes distributor pricing, drop-in QFN-16 alternatives from Microchip's PIC16 family, application guidance, and practical design notes that are not present on the bare manufacturer product page.

Angebot Kontakt

PIC16F1614-I/P

PIC16F1614-I/P - 8-Bit MCU, 7KB Flash, 32MHz, 14-PDIP | Microchip

The Microchip Technology PIC16F1614-I/P is an 8-bit RISC microcontroller from the PIC16F161X family, offering 7 KB (4K x 14 words) of Flash program memory and 512 bytes of SRAM in a 14-pin PDIP (0.300 inch, 7.62 mm) through-hole package. The device operates up to 32 MHz instruction clock, delivers 10-bit ADC with up to 8 channels, and supports Core Independent Peripherals including Configurable Logic Cells (CLC), Zero-Cross Detector (ZCD), 24-bit Signal Measurement Timer (SMT), and Complementary Waveform Generator (CWG) for embedded motor and lighting control. It operates from 2.3V to 5.5V with eXtreme Low Power (XLP) Sleep currents in the nanoamp range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, RAM, and peripheral interfaces. The PIC16F1614 belongs to the 8-bit RISC MCU class, where each instruction executes in one instruction cycle, providing deterministic timing critical for real-time control. Within the broader taxonomy, it sits in the 8-bit microcontroller category under microcontrollers and integrated circuits. It is pin-compatible with PIC16F1613 in the same package, enabling design scalability with shared PCB layouts. Key differentiating features include four Configurable Logic Cells that replace external discrete glue logic, a 24-bit SMT for precise time and pulse measurement, a Zero-Cross Detector for AC line synchronization, and a Complementary Waveform Generator producing complementary PWM outputs with programmable dead-band for half-bridge motor drive. These features reduce external component count and BOM cost in motor control, lighting ballast, and digital power conversion applications. Technically, the PIC16F1614 uses Microchip's enhanced mid-range core with a hardware multiply and 16-level stack. Memory includes 7 KB self-programmable Flash, 512 B SRAM, and 256 B EEPROM. Peripherals include up to 8x 10-bit ADC channels, two PWM modules (10-bit), two CCP modules, two USART, two SPI, two I2C, and up to 12 I/O pins with interrupt-on-change. This part fits low-power fan control, sensor interfacing, BLDC motor commutation, AC phase control, LED lighting, and IoT endpoint nodes. For battery-powered designs, XLP Sleep mode with nA-level current enables multi-year coin-cell operation in sensor beacons. The 14-PDIP package eases prototyping and hobbyist use. When designing, prioritize PCB trace layout for ADC analog inputs (guard ring, ground plane separation), and use the CWG module for half-bridge gate drive rather than a discrete driver when possible. Always validate PWM frequency against MOSFET/IGBT switching losses. This page synthesizes the Microchip PIC16F1614-I/P datasheet, real-time distributor pricing from DigiKey/Mouser/LCSC, drop-in same-family alternatives from the Site MPN list, and practical design notes not present in the manufacturer datasheet alone.

Angebot Kontakt

PIC16F1614-I/SL

PIC16F1614-I/SL - 8-Bit 32MHz MCU 7KB Flash | Microchip

The Microchip Technology PIC16F1614-I/SL is an 8-bit PIC® XLP™ flash microcontroller featuring a 32MHz CPU, 7KB (4K x 14) program flash, 512 bytes SRAM, and a 14-pin SOIC package. It integrates a 10-bit ADC, Configurable Logic Cell (CLC), Complementary Output Generator (COG), Signal Measurement Timer (SMT), Zero-Cross Detect (ZCD), and CCP peripherals designed for embedded control of small motors and general-purpose applications. An 8-bit flash microcontroller (MCU) is a small, self-contained computer-on-a-chip that integrates an 8-bit CPU, non-volatile flash program memory, volatile SRAM, and a configurable peripheral set into a single IC. Within the broader hierarchy, 8-bit MCUs sit below 16-bit and 32-bit MCUs in computational throughput, but excel in deterministic real-time control, ultra-low power operation (the PIC16 XLP family is engineered for nanoWatt standby currents), and BOM cost minimization. They are the dominant choice for sensor nodes, motor control loops, user-interface handling, and battery-powered devices where code density and predictability outweigh raw MIPS. Key features include 32MHz internal oscillator operation, 10-bit ADC with computation, 24-bit Signal Measurement Timer (SMT) for precise time-of-flight and edge counting, Zero-Cross Detect for AC line synchronization, Configurable Logic Cell, Complementary Output Generator, and nanoWatt XLP power management. The 14-pin SOIC (SL) package is a JEDEC-standard 3.90mm-wide surface-mount footprint that is breadboard-friendly and reflow-solderable, suitable for both prototyping and high-volume production. The PIC16F1614 uses a 14-bit modified Harvard RISC architecture with a 16-level hardware stack, single-cycle hardware multiply, and C-compiler-friendly instruction set. The XLP nanoWatt technology delivers sub-microamp sleep modes enabling multi-year battery life in IoT edge nodes, while the integrated SMT 24-bit timer and CLC permit hardware-level signal processing without CPU intervention, freeing the core for system-level logic. Typical applications include small DC and stepper motor control (BLDC, brushed DC), fan control, TRIAC dimming with ZCD, sensor signal conditioning, appliance controls, LED lighting drivers, IoT edge nodes, and general-purpose embedded control. The industrial-grade -40C to +85C temperature range supports factory and outdoor deployments. When designing with this device, allocate sufficient code-space headroom (5-10% free flash for field updates), provide adequate Vdd decoupling per the datasheet reference circuit, and verify that the chosen CCP/COG/SMT peripheral combination fits the application timeline within the 32MHz instruction budget. This page synthesizes distributor pricing from DigiKey/Mouser/LCSC, parametric drop-in alternatives in the same SOIC-14 footprint, and practical design notes that go beyond what is reprinted on standard catalog pages.

Angebot Kontakt

PIC16F1614-I/ST

PIC16F1614-I/ST - 8-Bit MCU, 7KB Flash, 32MHz, TSSOP-14 | Microchip

The Microchip Technology PIC16F1614-I/ST is an 8-bit Flash microcontroller from the PIC16F161X family, integrating 7KB of program memory (4K x 14-bit words), 512 bytes of RAM, and a 32 MHz internal oscillator in a 14-pin TSSOP surface-mount package. It combines a 10-bit ADC, Capture/Compare/PWM (CCP), a 24-bit Signal Measurement Timer (SMT), Zero-Cross Detect, and a math accelerator, providing on-chip resources for embedded control of small motors and general-purpose applications. The -I/ST suffix designates the industrial temperature grade (-40C to +85C) and TSSOP-14 packaging. A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory (Flash or ROM), volatile data memory (RAM), and integrated peripherals such as timers, ADCs, and communication interfaces. Within the broader taxonomy, the PIC16F1614 sits in the 8-bit microcontroller class (PIC16 -> 8-bit PIC MCU -> microcontroller -> embedded processor -> semiconductor). It uses Microchip's enhanced mid-range core with a 14-bit instruction word, balancing code density with deterministic interrupt latency for real-time control. Key features include 7KB self-programmable Flash, multiple PWM/CCP channels for motor and LED control, a 24-bit SMT capable of precise time-of-flight or frequency measurements, Zero-Cross Detect for AC-line-synchronized switching, and Configurable Logic Cells (CLC) for hardware customization. The XLP (eXtreme Low Power) designation places sleep current in the nanoampere range, making the part attractive for battery-operated sensor nodes. The architecture uses a Harvard-style bus with separate program and data paths, a 16-level hardware stack, and direct LED drive capability on selected pins. The device operates from 2.5V to 5.5V across the industrial thermal range, and integrates common sensor and actuator interfaces without external glue logic. Typical applications include small brushed-DC and stepper motor control, ceiling-fan and HVAC line-voltage control, LED lighting drivers, sensor signal conditioning, and general-purpose embedded control. Compared with discrete logic designs, the PIC16F1614 reduces BOM count and PCB area by integrating ADC, PWM, and commutation timers on one die. When designing with this MCU, place a 100 nF decoupling capacitor close to VDD with a bulk capacitor nearby, and keep the ICSP/PGD-PGC pins accessible for in-circuit programming. Program CONFIG words to match the chosen oscillator, watchdog timer, and code-protect settings before first use. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not consolidated in the manufacturer datasheet.

Angebot Kontakt

PIC16F1614T-I/SL

PIC16F1614T-I/SL - 8-bit MCU, 7KB Flash, 32MHz | Microchip

The Microchip Technology PIC16F1614T-I/SL is an 8-bit PIC microcontroller from the PIC16F161X family with 7KB Flash program memory, 512 bytes RAM, and 32 MHz internal oscillator, housed in a 14-pin SOIC (SL) package. The device integrates a 10-bit ADC, Capture/Compare/PWM (CCP), 24-bit Signal Measurement Timer (SMT), Zero-Cross Detection (ZCD), and peripheral pin select (PPS) for flexible mixed-signal control in compact form factors. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and configurable peripherals. The PIC16F1614 uses Microchip's enhanced mid-range 8-bit core running up to 32 MHz (8 MIPS) with a single-cycle instruction pipeline and 14-bit instruction word. The -I suffix indicates the industrial temperature range of -40C to +85C, while T denotes tape-and-reel packaging, and SL identifies the 14-pin SOIC outline. Key features include 10-bit A/D with computation, 5-bit DAC, 8-bit/16-bit timers, angular timer (24-bit SMT), complementary waveform generator, hardware limit timer, configurable logic cell (CLC), math accelerator, and an HF 32 MHz internal oscillator with +/- 2% accuracy. The XLP (eXtreme Low Power) variant retains active-mode current under 100 uA/MHz and sleep currents in the nA range, enabling battery-friendly duty-cycled designs. The PIC16F161X architecture delivers CIP (Core Independent Peripherals) such as CLC and SMT that offload state-machine and timing tasks from the CPU, allowing closed-loop fan control, lighting fade, and small-motor trapezoidal commutation without firmware overhead. With 7KB Flash (4K x 14 words) and 512 bytes RAM, the device targets cost-sensitive 8-bit applications that still need modern analog integration. Typical applications include small DC and stepper motor control loops, fan and pump RPM regulation, LED lighting controllers with dimming, household appliances, and general-purpose mixed-signal embedded control. The 14-pin SOIC footprint also simplifies migration from older PIC16F1xxx designs. Industrial-grade temperature and on-chip CIP make this MCU a strong fit for appliance and IoT edge nodes. Design tip: ensure the MCLR pin has the recommended 10 kohm pull-up and a 0.1 uF bypass capacitor on VDD within 5 mm of the pin. The ZCD and CCP peripherals are configured independently via PPS, so pin mapping must be finalized before firmware lock-in. This page synthesizes distributor pricing, drop-in alternative MPNs from the same Microchip PIC16F161X family, and practical design notes not aggregated in the manufacturer datasheet, helping procurement and embedded engineers evaluate the PIC16F1614T-I/SL against competing 14-pin 8-bit MCU options.

Angebot Kontakt

PIC16F1615-E/ML

PIC16F1615-E/ML - 8-bit MCU, 14KB Flash, 32MHz, QFN-16 | Microchip

The Microchip Technology PIC16F1615-E/ML is an 8-bit PIC microcontroller featuring 14KB Flash program memory, 1KB RAM, and a 32MHz internal oscillator, housed in a 16-pin QFN (ML) package with extended -40C to +125C operating temperature range. The device integrates a 10-bit ADC, Capture/Compare/PWM (CCP), 24-bit Signal Measurement Timer (SMT), Zero-Cross Detection, and Complementary Waveform Generator (CWG), making it well-suited for closed-loop control of small motors, lighting, and general-purpose embedded applications. An 8-bit microcontroller (MCU) is a compact processor core that integrates CPU, RAM, program memory, and peripherals on a single die. Within the system hierarchy, an MCU sits below microprocessors (MPUs) but above discrete logic, providing programmable I/O, timing, and analog functions for embedded control. The PIC16F1615 belongs to Microchip's PIC16F1xxx enhanced mid-range family, which balances code density, peripheral richness, and ultra-low-power (XLP) operation for cost-sensitive industrial and consumer designs. Key features include 14KB self-programmable Flash, 1KB SRAM, 256B EEPROM, 10-bit ADC with computation (ADC2), 8-bit DAC, configurable logic cells (CLC), and Peripheral Pin Select (PPS). The integrated 32MHz high-speed oscillator eliminates external crystals in many designs. Built-in Core Independent Peripherals (CIPs) such as the CWG and SMT allow complex waveforms and precise time measurements without CPU intervention, reducing firmware complexity and power consumption. The PIC16F1615-E/ML uses a 14-bit instruction set with 8-bit data path and a modified Harvard architecture. Its nanoWatt XLP technology enables active currents under 50 uA/MHz and sleep currents in the nanoamp range, enabling battery-powered and energy-harvesting designs. The device supports in-circuit serial programming (ICSP) and in-circuit debugging (ICD) through dedicated pins, allowing rapid firmware iteration. Typical applications include small BLDC or brushed-DC motor control, LED lighting drivers, switched-mode power supply (SMPS) control, sensor signal conditioning, fan control, and home appliance user interfaces. Its combination of integrated analog, logic, and timer peripherals makes it well matched to applications that previously required multiple discrete ICs. When designing with the PIC16F1615-E/ML, ensure that VDD decoupling follows Microchip's recommended layout guidelines: a 0.1 uF ceramic capacitor placed within 4mm of each VDD/AVDD pin, plus a bulk 10 uF capacitor on the main supply rail. PPS configuration should be assigned before enabling peripherals to avoid spurious output transitions on power-up. This page synthesizes verified distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer datasheet front page.

Angebot Kontakt

PIC16F1615-E/P

PIC16F1615-E/P - 8-Bit 32MHz 14KB Flash MCU | Microchip 14-PDIP

The Microchip Technology PIC16F1615-E/P is an 8-bit microcontroller from the PIC® XLP™ 16F family with on-chip Functional Safety (FuSa) features, delivering 32 MHz CPU performance with 14 KB (8K x 14) of FLASH program memory in a 14-pin PDIP package. Key highlights include 1 KB of RAM, a 10-bit A/D converter, configurable logic cells (CLC), CCP, 24-bit SMT timer, and Zero-Cross Detect (ZCD) peripherals tailored for embedded control of small motors and general-purpose applications. The 'E' suffix denotes the extended industrial temperature grade of -40C to +125C, and the 'P' suffix designates the through-hole 14-pin PDIP package. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory (FLASH), working memory (RAM), and a rich set of programmable peripherals. The PIC16F1615 belongs to the 8-bit PIC mid-range architecture, which occupies the entry-level node in the Microchip controller hierarchy: 8-bit PIC -> PIC16 family -> PIC16F1xxx enhanced mid-range -> PIC16F161x sub-family with XLP and FuSa features. Its eXtreme Low Power (XLP) technology enables nanoWatt sleep currents suitable for battery-powered IoT nodes, and the FuSa subsystem provides hardware diagnostics for IEC 60730 Class B safety compliance. Differentiating features include 10-bit ADC with computation, complementary waveform generator (CWG), four 16-bit timers, two CCP modules, two UART, one I2C/SPI, and 12 I/O pins with interrupt-on-change. The wide operating voltage of 1.8 V to 5.5 V supports both 3.3 V and 5 V rails common in industrial sensor interfaces. Internal 32 MHz oscillator eliminates external crystals in cost-sensitive designs, while the 14-pin PDIP format simplifies through-hole prototyping on breadboards and perfboards. Functional safety features include windowed WDT, oscillator fail-safe, and CRC memory verification, making it attractive for white-good and appliance control. Typical applications include small BLDC/PMSM motor control loops, sensor signal conditioning, LED lighting controllers, battery-powered IoT endpoints, and safety-critical white goods such as washing machines and dishwashers. The combination of 14 KB FLASH and 1 KB RAM is well suited to mid-complexity state-machine firmware with light protocol stacks. The CWG and CCP peripherals support half-bridge and full-bridge drive timing for low-voltage brushed or stepper motors below 1 A. When designing with this device, allocate at least two I/O pins for ICSP programming (PGD/PGC), and reserve one I/O for the MCLR reset. The internal oscillator trim should be calibrated at production for UART timing accuracy. Decouple VDD with a 100 nF ceramic placed within 5 mm of the pin, and route analog VDD+ AVSS paths with a ferrite bead if ADC accuracy below 1 LSB is required. This page synthesizes distributor pricing, drop-in PIC16F161x family alternatives, application guidance, and PCB design notes not consolidated on the manufacturer product page.

Angebot Kontakt

PIC16F1615-E/SL

PIC16F1615-E/SL - 8-bit MCU 14KB Flash 32MHz 14-SOIC | Microchip

The Microchip Technology PIC16F1615-E/SL is an 8-bit RISC microcontroller built around the PIC16 CPU core, delivering 32 MHz of computational performance with 14KB (8K x 14) of Flash program memory, 1 KB of RAM, and a 10-bit A/D converter. Housed in a 14-pin SOIC package and operating from 2.5 V to 5.5 V (down to 2.3 V at 16 MHz), this Functional Safety (FuSa) capable device is engineered for embedded control of small motors and general-purpose applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals. Within the broader taxonomy, the PIC16F1615 sits in the 8-bit MCU category, which in turn belongs to the microcontroller IC family and ultimately the integrated circuits class of semiconductor devices. The 8-bit PIC architecture balances deterministic interrupt response, low power consumption, and a compact instruction set, making it ideal for cost-sensitive real-time control where 32-bit processing is unnecessary. Key features that distinguish this part include a 32 MHz internal oscillator with ±1% accuracy, Zero Cross Detection (ZCD), 24-bit Signal Measurement Timer (SMT), Configurable Logic Cells (CLC), Complementary Waveform Generator (CWG), and a Windowed Watchdog Timer (WWDT) with hardware limit timer. The integrated 10-bit ADC supports up to 12 channels with hardware Capacitive Voltage Divider (CVD) for touch sensing, and the device includes functional safety features such as CRC/Scan and a hardware Memory Built-In Self-Test (MBIST). The 14-SOIC package supports industrial operating temperatures from -40 °C to +125 °C. The PIC16F1615 uses a Harvard-architecture RISC CPU with 49 single-word instructions, executing most instructions in a single clock cycle. Its nanoWatt XLP technology delivers sleep currents in the nanoampere range, making it well suited for battery-powered designs. The peripheral integration (CLC, CWG, SMT, ZCD) replaces discrete components, reducing both BOM cost and PCB area in motor drive, lighting, and sensor-interface designs. Typical applications include small BLDC and stepper motor control, solid-state lighting with dimming and color mixing, capacitive-touch user interfaces, fan and pump control, and sensor signal conditioning. According to the manufacturer product page, the device targets embedded control applications requiring functional safety at the MCU level. When designing with the PIC16F1615, allocate the analog and digital supply pins (VDD/VSS) per the datasheet and use decoupling capacitors of 0.1 µF plus a 10 µF bulk capacitor. The -E suffix denotes the extended industrial temperature range (-40 °C to +125 °C); select the -I variant only for commercial 0-85 °C or industrial -40-85 °C ranges. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design considerations beyond the manufacturer datasheet to accelerate component selection.

Angebot Kontakt

PIC16F1615-I/JQ

PIC16F1615-I/JQ - 8-bit 32MHz MCU, 14KB Flash, 16-UQFN | Microchip

The Microchip Technology PIC16F1615-I/JQ is an 8-bit PIC microcontroller with XLP (eXtreme Low Power) technology and Functional Safety (FuSa) features, operating at up to 32 MHz in a compact 16-pin UQFN (4x4 mm) package with exposed pad. It integrates 14 KB (8K x 14) of Flash program memory, 1 KB RAM, and a rich set of peripherals including 10-bit ADC with Computation (ADCC), Zero-Cross Detection (ZCD), 24-bit Signal Measurement Timer (SMT), Windowed Watchdog Timer (WWDT), Cyclic Redundancy Check (CRC/SCAN), Capture/Compare/PWM (CCP), and Configurable Logic Cells (CLC). A microcontroller (MCU) is an integrated circuit containing a CPU core, program memory (Flash), data memory (RAM), and on-chip peripherals such as timers, ADCs, and communication interfaces. The PIC16F1615 belongs to the 8-bit PIC16 family within Microchip's 8-bit microcontroller portfolio, which sits hierarchically under the broader PIC architecture, microcontrollers, embedded controllers, and finally the semiconductor category. The 16-pin UQFN package makes it suited for space-constrained designs where a low pin count PIC with rich analog features is required. Key features of the PIC16F1615-I/JQ include 14 KB Flash, 1 KB RAM, 256 B EEPROM, 12 I/O pins, 1.8V-5.5V wide operating voltage, internal 32 MHz oscillator, 10-bit ADCC, two CCP modules, two CLC blocks, ZCD, WWDT, CRC, and high-temperature operation up to 125 °C. The XLP designation indicates ultra-low-power Sleep currents in the nA range with active mode current below 50 µA/MHz, making it ideal for battery-powered applications. Architecturally, the PIC16F1615 uses a RISC-based 8-bit PIC core with hardware Multiply and a 14-bit instruction word. The integrated ADCC automates averaging, burst accumulation, and threshold comparisons without CPU intervention, while the 24-bit SMT enables precise time-of-flight or capacitive sensing measurements. Functional Safety (FuSa) features such as WWDT, CRC memory scan, and dedicated error peripherals support IEC 61508 SIL-2 capable systems. Typical applications include small motor control (fan, pump, BLDC), LED lighting control with ZCD-based TRIAC dimming, capacitive touch / proximity sensing via CLC + SMT, battery chargers, sensor nodes in IoT edge devices, and general-purpose industrial control with safety diagnostics. The 16-UQFN footprint suits wearables, sealed sensor modules, and miniaturized industrial nodes. When designing with this MCU, ensure the exposed pad is soldered to the PCB ground plane for thermal dissipation and electrical reference. Use MPLAB X IDE with XC8 compiler and MPLAB Code Configurator (MCC) for rapid peripheral setup. For functional safety designs, consult the FuSa user guide and the FMEDA document for failure-rate budgeting. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, providing information gain beyond what is available on distributor product pages.

Angebot Kontakt

PIC16F1615-I/ML

PIC16F1615-I/ML - 8-Bit 32MHz 14KB Flash MCU | Microchip

The Microchip PIC16F1615-I/ML is an 8-bit PIC microcontroller in the PIC16F161X family, featuring 14KB Flash program memory, 1KB RAM, 32MHz CPU speed, and a 10-bit ADC, housed in a 16-pin QFN (4x4 mm) package with an exposed thermal pad. It targets embedded control of small motors and general-purpose applications in low pin-count packages, and carries Microchip's PIC XLP (eXtreme Low Power) branding for battery-friendly operation. The Functional Safety (FuSa) variant adds safety-oriented peripherals useful for fault detection in closed-loop control systems. An 8-bit microcontroller is a self-contained computing device that integrates a CPU, program memory (Flash), data memory (RAM), and peripherals onto a single silicon die. The PIC16F1615 belongs to the PIC10/12/16 mid-range family, which combines a Harvard architecture with a RISC instruction set optimized for deterministic interrupt response and predictable timing. Within the broader semiconductor taxonomy, it sits as: microcontroller -> 8-bit MCU -> PIC16 mid-range -> PIC16F161X family. The XLP variants further reduce active and sleep current draw for energy-harvesting and battery-powered designs. Key features include a 32MHz internal oscillator (8 MIPS), 14KB Flash with self-programmability, 1KB RAM, 256 bytes of EEPROM, a 10-bit A/D converter with up to 8 channels, multiple PWM modules, a 24-bit Signal Measurement Timer (SMT), Zero-Cross Detection, Configurable Logic Cells (CLC), and Core Independent Peripherals (CIPs) that let hardware handle tasks without CPU intervention. The 16-QFN (4x4 mm) package gives a compact footprint with an exposed pad for thermal dissipation. Technically, the device operates from 2.3V to 5.5V, includes an 8-level hardware stack, 16 I/O pins, and supports in-circuit serial programming (ICSP) and in-circuit debugging. Peripherals like the CLC and SMT enable timer, logic, and signal-processing functions to run autonomously, freeing the CPU for application code. Typical applications include small BLDC and stepper motor control, LED lighting with dimming, sensor signal conditioning, consumer appliances, battery-powered IoT endpoints, and functional-safety subsystems. Its compact QFN-16 footprint suits space-constrained designs. When designing, ensure the exposed pad is soldered to a sufficient copper pour for thermal relief, place a 0.1uF decoupling capacitor on VDD close to the pin, and follow Microchip's errata for any silicon revision-specific behavior. This page synthesizes distributor pricing, drop-in QFN-16 alternatives from the same PIC16 family, and practical design notes not found in the manufacturer datasheet alone.

Angebot Kontakt

PIC16F1615-I/P

PIC16F1615-I/P - 8-Bit 32MHz MCU 14KB Flash 14-PDIP | Microchip

The Microchip Technology PIC16F1615-I/P is a low-pin-count 8-bit PIC microcontroller from the PIC® XLP™ 16F family with functional-safety (FuSa) features, delivering 32 MHz CPU performance, 14 KB of Flash program memory and 1 KB of RAM in a 14-pin PDIP through-hole package. It targets embedded control of small motors and general-purpose applications with on-chip peripherals including a 10-bit ADC, CCP, 24-bit SMT (Signal Measurement Timer), Zero Cross Detection and multiple PWM/CCP channels. A microcontroller (MCU) is an integrated circuit that combines a CPU core, non-volatile program memory (Flash), volatile working memory (RAM), and a range of peripheral blocks (ADC, timers, communication ports) on a single die. Within the broader semiconductor taxonomy it sits under: microcontroller -> 8-bit microcontroller -> PIC16 family -> PIC16F161X sub-family -> power management and motor/lighting control application segment. The PIC16F1615 in particular belongs to the PIC16(L)F161X family that introduced 24-bit SMT and Zero Cross Detect for solid-state relay, TRIAC and BLDC-type control. Key features of the PIC16F1615-I/P include: 32 MHz internal oscillator, 14 KB Flash with self-programmable support, 1 KB RAM, 256 B EEPROM, 10-bit ADC with multiple channels, 5-/8-bit DAC, configurable logic cell (CLC), Complementary Waveform Generator (CWG), Zero Cross Detection (ZCD), 24-bit Signal Measurement Timer (SMT), CCP modules, EUSART, I2C/SPI, and 12 I/O pins on the 14-pin PDIP. The eXtreme Low Power (XLP) technology delivers <50 nA typical sleep current, making it suitable for battery-powered designs. The device supports a wide operating voltage of 2.5 V to 5.5 V (PIC16F1615) or 1.8 V to 3.6 V (PIC16LF1615). Architecturally, the device uses Microchip's enhanced mid-range 8-bit RISC core with a 14-bit instruction word, 8-level hardware stack and 49 instruction set, providing 16 MIPS throughput at 32 MHz. The integrated CWG and ZCD peripherals allow direct generation of complementary PWM outputs with programmable dead-band and zero-voltage switching, which removes the need for an external gate-driver in many motor/lighting designs. CIPs (Core Independent Peripherals) like CLC, NCO and SMT let signal conditioning run without CPU intervention, freeing the core for supervisory tasks. Typical applications include low-voltage motor control (BLDC, brushed DC), solid-state lighting and TRIAC dimming, sensor signal conditioning with CLC, low-power battery-powered IoT nodes, and consumer / industrial control where small pin count and FuSa-class hardware documentation are required. The PIC16F1615 family is also well-suited as a functional-safety MCU in household appliances and white goods (IEC 60730 class B support documentation is available from Microchip). When designing with this MCU, ensure the supply decoupling network uses a 100 nF ceramic capacitor within a few millimetres of the VDD pin, optionally with a bulk 10 uF tantalum or aluminium electrolytic cap on the main rail. Leave MCLR pulled up via a 10 kohm resistor for normal operation, or tie directly to VDD if not used. For ADC accuracy, keep analog traces short and away from switching nodes like the CWG outputs. This page synthesises distributor pricing, drop-in alternatives, and practical design notes beyond what the manufacturer datasheet alone provides, helping engineers compare options and make a sourcing decision quickly.

Angebot Kontakt

PIC16F1615-I/SL

PIC16F1615-I/SL - 8-Bit 32MHz 14KB Flash MCU | Microchip

The Microchip Technology PIC16F1615-I/SL is an 8-bit RISC microcontroller featuring 14KB (8K x 14 words) of Flash program memory, 1KB of data RAM, and a maximum 32MHz CPU clock, housed in a 14-pin SOIC (SL) package with industrial -40C to +85C temperature rating. The part belongs to the PIC16(L)F161X family and integrates Core Independent Peripherals (CIPs) such as a 24-bit Signal Measurement Timer (SMT), Zero Cross Detection (ZCD), Configurable Logic Cell (CLC), and Complementary Waveform Generator (CWG), alongside Intelligent Analog modules including a 10-bit ADC with Computation and two comparators. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data bus and a RISC or CISC instruction set, integrating CPU, program memory (Flash/ROM), data memory (RAM), non-volatile EEPROM, timers, communication peripherals (UART, SPI, I2C), and digital/analog I/O. The 8-bit MCU belongs to the broader hierarchy of microcontroller -> embedded processor -> semiconductor, and is widely used in cost-sensitive, low-power, deterministic control applications. Microchip's PIC16 family is recognized for its deterministic architecture, low power consumption (XLP eXtreme Low Power), and ease of use with the MPLAB X IDE and XC8 compiler toolchain. Key features of the PIC16F1615 include 12 I/O pins, two PWM modules, 11 timers, an EUSART and MSSP for serial communication, 10-bit ADC, and Functional Safety (FuSa) support for IEC 61508 SIL-2 capable designs. The SL suffix indicates the 14-pin SOIC package, 1.75mm nominal height, 3.90mm body width, suitable for standard 0.1-inch pitch PCB layouts. The device operates from 2.3V to 5.5V across the industrial temperature range. Architecturally, the PIC16F1615 uses Microchip's enhanced mid-range core with hardware multiply support and a 14-bit instruction word. On-chip CIPs (CLC, CWG, SMT, ZCD) let designers implement complex signal conditioning, waveform generation, and timing measurements in hardware without CPU involvement, reducing firmware complexity and power consumption. The 24-bit SMT enables sub-microsecond timing resolution for energy metering or motor control feedback. Typical applications include small motor control (BLDC, stepper, brushed DC), LED lighting and constant-current regulation, IoT and battery-powered sensor nodes, home appliances, and functional-safety-embedded industrial controls. Functional Safety (FuSa) variants like this device support SIL-2-capable system designs with diagnostic libraries and FMEDA reports available from Microchip. When designing with this MCU, leave unused I/O as outputs driven low to minimize power, enable the watchdog timer for SIL applications, and use the CWG peripheral for hardware-driven complementary PWM rather than software bit-banging to reduce jitter. Program the device via In-Circuit Serial Programming (ICSP) using the ICSPCLK/ICSPDAT pins. This page synthesizes distributor pricing, drop-in alternative PIC16F161x family parts, and practical design notes not found on a single manufacturer page.

Angebot Kontakt

PIC16F1615-I/ST

PIC16F1615-I/ST - 8-Bit 32MHz MCU 14KB Flash | Microchip

The Microchip PIC16F1615-I/ST is an 8-bit PIC® XLP™ 16F microcontroller running at up to 32 MHz, integrating 14 KB (8K x 14) of Flash program memory, 1 KB of SRAM, and a 10-bit A/D converter in a 14-pin TSSOP package. The part carries Microchip's Functional Safety (FuSa) capability and targets low-power embedded control of small motors and general-purpose applications. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash/ROM), data memory (SRAM), peripherals, and I/O on one silicon die. MCUs sit at the bottom of the embedded compute hierarchy below microprocessors (MPUs) and system-on-chips (SoCs), and are preferred in cost- and power-constrained applications such as sensor nodes, small motor drivers, and human-machine interfaces. The PIC16F1615 belongs to the PIC16F1 enhanced mid-range family and is one of the smallest Flash members in Microchip's eXtreme Low Power (XLP) lineup. Key features include a 10-bit ADC with up to 8 channels, configurable Logic Cell (CLC), Complementary Waveform Generator (CWG), Numerically Controlled Oscillator (NCO), Zero-Cross Detect (ZCD), 24-bit Signal Measurement Timer (SMT), and CCP/PWM peripherals. The device operates from 2.3 V to 5.5 V across -40 °C to +85 °C and offers sleep currents in the microamp range thanks to the XLP architecture. Core-independent peripherals offload tasks from the CPU, lowering average power and BOM cost. The device is built on an enhanced mid-range 8-bit RISC core with a modified Harvard architecture and 14-bit instruction word. The 32 MHz internal oscillator drives 8 MIPS throughput, with hardware multiplier and interrupt-driven I/O. Each instruction cycle is four oscillator clocks, balancing deterministic interrupt latency with active-mode current draw. Typical applications include small DC motor control, LED lighting drivers, fan control, battery-powered sensor hubs, home appliances, and safety-critical consumer devices that benefit from Functional Safety features. The TSSOP-14 footprint also suits hand-held and space-constrained designs. Designers should plan pin allocation before PCB layout because the 14-pin TSSOP exposes only a limited number of ADC channels and shared peripherals. Configuring the CLC and NCO in MPLAB X IDE allows logic replacement of discrete gates. This page synthesizes distributor pricing, drop-in alternatives within the same 14-TSSOP footprint, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt

PIC16F1615T-I/JQ

PIC16F1615T-I/JQ - 8-bit 32MHz MCU, 14KB Flash, 16-UQFN | Microchip

The Microchip Technology PIC16F1615T-I/JQ is an 8-bit PIC microcontroller from the PIC® XLP™ 16F family with Functional Safety (FuSa) features, integrating 14KB (8K × 14) of Flash program memory, 1KB of RAM, and a 32 MHz internal oscillator in a 16-pin UQFN (4 × 4 mm) package. An 8-bit microcontroller is a single-chip computer built around an 8-bit data path that executes instructions on bytes; it sits within the broader taxonomy of microcontroller -> embedded controller -> semiconductor device, and the PIC16F1615 specifically belongs to Microchip's mid-range PIC16 family optimized for low-power, mixed-signal embedded control of small motors and general-purpose applications in 8/14/20-pin packages. Key features include a 10-bit ADC with multiple channels, Zero-Cross Detection (ZCD), Configurable Logic Cells (CLC), Complementary Waveform Generator (CWG), Signal Measurement Timer (24-bit SMT), Windowed Watchdog Timer (WWDT), CRC/Memory Scan with hardware acceleration, and eXtreme Low Power (XLP) sleep modes drawing as little as 20 nA. Communication options include I²C, SPI, UART/USART, and LINbus. The PIC16F1615 uses an enhanced mid-range Harvard RISC architecture with a 14-bit instruction word, 49 instructions, and a hardware multiply, providing 8 MIPS at 32 MHz. The integrated 32 MHz high-precision internal oscillator eliminates the external crystal in many designs, while the Functional Safety (FuSa) features target IEC 60730 Class B safety requirements in household appliances and white goods. Typical applications include BLDC/PMSM small-motor commutation, LED lighting drivers with smooth dimming via the CWG module, IoT sensor nodes, household appliance control (washing machines, dishwashers), and battery-powered portable instruments requiring XLP sleep current budgets below 1 µA. When designing with this device, allocate the 16-UQFN footprint with a small thermal pad to the GND plane, follow Microchip's AN 1004 guidelines for UQFN PCB land patterns, and use MPLAB X IDE with the XC8 compiler for firmware development. Always confirm toolchain compatibility before migrating from older PIC16F1xxx devices. This page synthesizes distributor pricing, drop-in alternatives drawn from Microchip's PIC16 family, and practical design notes not found in the manufacturer datasheet alone.

Angebot Kontakt

Unterkategorien

Produkte (38.000+)

PIC16F1613-E/ST - 8-bit 32MHz XLP MCU 3.5KB Flash | Microchip

PIC16F1613-I/ML - 8-Bit MCU, 3.5KB Flash, 32MHz, 16-QFN | Microchip

PIC16F1613-I/P - 8-bit MCU, 3.5KB Flash, 32MHz | Microchip

PIC16F1613-I/SL - 8-Bit 32MHz MCU 3.5KB Flash | Microchip

PIC16F1613-I/ST - 8-Bit MCU, 32MHz, 3.5KB Flash, XLP | Microchip

PIC16F1613T-I/SL - 8-bit MCU, 32MHz, 3.5KB Flash, 14-SOIC | Microchip

PIC16F1614-E/ML - 8-bit 32MHz 7KB Flash MCU | Microchip | QFN-16

PIC16F1614-E/P - 8-Bit MCU, 7KB Flash, 32MHz | Microchip

PIC16F1614-E/SL - 8-Bit MCU, 7KB Flash, 32MHz | Microchip

PIC16F1614-E/ST - 8-bit 32MHz 7KB Flash MCU 14-TSSOP | Microchip

PIC16F1614-I/ML - 8-bit MCU, 7KB Flash, 32MHz, 16-QFN | Microchip

PIC16F1614-I/P - 8-Bit MCU, 7KB Flash, 32MHz, 14-PDIP | Microchip

PIC16F1614-I/SL - 8-Bit 32MHz MCU 7KB Flash | Microchip

PIC16F1614-I/ST - 8-Bit MCU, 7KB Flash, 32MHz, TSSOP-14 | Microchip

PIC16F1614T-I/SL - 8-bit MCU, 7KB Flash, 32MHz | Microchip

PIC16F1615-E/ML - 8-bit MCU, 14KB Flash, 32MHz, QFN-16 | Microchip

PIC16F1615-E/P - 8-Bit 32MHz 14KB Flash MCU | Microchip 14-PDIP

PIC16F1615-E/SL - 8-bit MCU 14KB Flash 32MHz 14-SOIC | Microchip

PIC16F1615-I/JQ - 8-bit 32MHz MCU, 14KB Flash, 16-UQFN | Microchip

PIC16F1615-I/ML - 8-Bit 32MHz 14KB Flash MCU | Microchip

PIC16F1615-I/P - 8-Bit 32MHz MCU 14KB Flash 14-PDIP | Microchip

PIC16F1615-I/SL - 8-Bit 32MHz 14KB Flash MCU | Microchip

PIC16F1615-I/ST - 8-Bit 32MHz MCU 14KB Flash | Microchip

PIC16F1615T-I/JQ - 8-bit 32MHz MCU, 14KB Flash, 16-UQFN | Microchip