Integrierte Schaltungen

PIC16F1709T-I/SS

PIC16F1709T-I/SS - 8-bit 32MHz 14KB Flash MCU | Microchip

The Microchip Technology PIC16F1709T-I/SS is an 8-bit PIC16F microcontroller featuring 14KB Flash, 1KB RAM, and a 32MHz internal oscillator, housed in a 20-pin SSOP package with tape-and-reel packaging. The 'T' suffix in the part number designates the tape-and-reel packaging option, while the 'I' indicates the industrial operating temperature range of -40C to +85C. The device belongs to Microchip's XLP (eXtreme Low Power) product family and integrates intelligent analog peripherals including operational amplifiers, a 10-bit ADC, an 8-bit DAC, high-speed comparators, zero-cross detect, and configurable logic cells (CLC). An 8-bit microcontroller (MCU) is a small computer-on-chip that integrates a CPU, memory, and peripherals around an 8-bit data bus. The PIC16F1709 sits in Microchip's mid-range MCU hierarchy (8-bit PIC -> PIC16 family -> enhanced mid-range x14 architecture) and combines RISC processing with on-chip intelligent analog to suit a wide variety of general-purpose applications. Its 200ns instruction execution enables responsive control loops while keeping power consumption low, making it suitable for battery-powered and energy-harvesting designs. Key features include Core Independent Peripherals (CLC, COG, Zero Cross Detect), Peripheral Pin Select (PPS) for flexible signal routing, EUSART, I2C, SPI communication interfaces, and on-chip op amps that eliminate external analog components. The integrated 10-bit ADC and 8-bit DAC support sensor conditioning and signal generation without external converters. The device operates from 2.3V to 5.5V across the industrial temperature range, with XLP technology delivering sleep currents in the microamp range. Typical applications include LED lighting control with COG-driven power-factor correction, consumer appliance user interfaces, IoT sensor nodes, battery-powered instrumentation, and low-cost motor control. The combination of intelligent analog and CIPs allows designers to offload timing-critical tasks from the CPU, reducing firmware complexity and improving system reliability. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone Microchip datasheet.

Angebot Kontakt

PIC16F1713-E/MV

PIC16F1713-E/MV - 8-Bit XLP MCU 7KB Flash 28-UQFN | Microchip

The Microchip Technology PIC16F1713-E/MV is an 8-bit PIC microcontroller featuring 7KB Flash program memory, 512B RAM, and 32MHz operation in a 28-pin UQFN (4x4 mm) package with extended (-40C to +125C) operating range. The device integrates high-speed comparators, 10-bit ADC, on-chip operational amplifiers, 5/8-bit DAC, CCP/PWM, CLC, COG, NCO, ZCD, and Peripheral Pin Select for maximum design flexibility. A microcontroller (MCU) is a single-chip computer containing a processor core, program and data memory, and integrated peripherals. The PIC16F1713 belongs to Microchip's PIC16 enhanced mid-range family, optimized for general-purpose and intelligent analog applications. The 'XLP' (eXtreme Low Power) designation indicates power-saving modes that extend battery life, making this MCU well suited to portable and energy-harvesting designs. As an 8-bit RISC MCU, the PIC16F1713 executes single-cycle instructions, balancing code density with deterministic timing. Key features include 14-bit instruction word, 32MHz internal oscillator, two operational amplifiers, four 10-bit ADC channels with computation, and core-independent peripherals that offload tasks from the CPU. The Zero Cross Detect (ZCD) and Numerically Controlled Oscillator (NCO) modules support advanced signal conditioning in motor control and lighting applications without software intervention. The architecture combines intelligent analog integration with low-power operation. On-chip op-amps can drive ADC inputs, implement active filters, or buffer sensor signals. The Configurable Logic Cell (CLC) and Complementary Output Generator (COG) enable custom hardware logic functions, reducing BOM cost by replacing discrete components. Peripheral Pin Select (PPS) allows flexible remapping of digital peripherals to any I/O pin, simplifying PCB layout. Typical applications include LED lighting control, sensor signal conditioning, battery-powered IoT nodes, motor control, and consumer appliances. The AEC-Q100 qualified grade supports automotive applications such as body electronics and interior lighting. The compact 4x4 mm UQFN package suits space-constrained designs. Design consideration: When using the internal 32MHz oscillator at full speed, ensure core-independent peripherals are configured to minimize wake events. For battery-powered designs, leverage the nanoWatt XLP sleep modes to reduce current consumption below 1 uA. This page synthesizes distributor pricing, drop-in package equivalents, and practical design considerations not collected in any single manufacturer document.

Angebot Kontakt

PIC16F1713-E/SO

PIC16F1713-E/SO - 8-Bit MCU, 32MHz, 7KB Flash, 28-SOIC | Microchip

The Microchip Technology PIC16F1713-E/SO is an 8-bit RISC microcontroller in the PIC16F family, featuring a 32MHz core, 7KB Flash program memory, 512 bytes RAM, and 28-pin SOIC wide-body packaging. It integrates on-chip op-amps, a 10-bit ADC with computation, Core Independent Peripherals (CLC, NCO, COG, Zero Cross Detect), and Peripheral Pin Select for flexible signal routing. The -E suffix denotes the extended industrial temperature grade (-40C to +125C). A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory, working RAM, and a set of integrated peripherals such as ADCs, timers, communication interfaces, and I/O. Microcontrollers sit at the top of the embedded control hierarchy: sensor input -> MCU -> actuator output, and are classified by bit-width (8-bit, 16-bit, 32-bit), architecture (von Neumann, Harvard), and instruction set (RISC, CISC). The PIC16F family belongs to the 8-bit RISC segment, optimized for cost-sensitive, low-power, deterministic control applications where predictable interrupt latency and small code footprint matter more than raw throughput. Key features of the PIC16F1713 include eXtreme Low Power (XLP) technology with sub-uA sleep currents, a high-speed comparator with 10-bit reference DAC, two operational amplifiers, up to 17 channels of 10-bit ADC, four 16-bit timers, two USART, one I2C, and one SPI peripheral. The 32MHz internal oscillator delivers 8 MIPS performance, while the 49 instruction set ensures tight C-code efficiency. The device operates from 2.3V to 5.5V with multiple power-managed modes. The architecture uses a 14-bit instruction word with a two-stage pipeline, modified Harvard memory organization separating program and data buses, and a priority-based interrupt controller. The integrated op-amps and 10-bit ADC reduce BOM cost in sensor-interface designs by eliminating external analog front-end stages. The CLC (Configurable Logic Cell) allows Boolean combinations of peripheral events without CPU intervention, enabling ultra-low-latency hardware responses. Typical applications include IoT sensor nodes, industrial sensor signal conditioning, battery-powered remote controls, HVAC thermostat controls, LED lighting drivers, and consumer appliance user interfaces. The combination of op-amps, ADC, and Core Independent Peripherals suits mixed-signal designs where analog and digital processing coexist on a single die. When designing with the PIC16F1713-E/SO, reserve sufficient decoupling (100nF plus 10uF bulk) within 5mm of the VDD pins, and follow Microchip AN588 for PCB layout of SOIC wide-body packages. For EMI-sensitive applications, route the 32MHz clock trace short and guard the analog AVSS/AVDD pair. This page synthesizes distributor pricing, verified drop-in same-package alternatives from Microchip's 28-pin PIC16F family, and practical design notes not consolidated in the manufacturer datasheet alone.

Angebot Kontakt

PIC16F1713-E/SS

PIC16F1713-E/SS - 8-bit MCU, 7KB Flash, 28-SSOP | Microchip

The Microchip PIC16F1713-E/SS is an 8-bit PIC microcontroller with 7KB Flash program memory, 512 bytes RAM, and 32 MHz CPU speed, housed in a 28-pin SSOP (5.30 mm width) package. It integrates on-chip op-amps, a 10-bit ADC, 5/8-bit DAC, Core Independent Peripherals (CLC, COG, NCO, ZCD), and Peripheral Pin Select (PPS) for maximum design flexibility. The 'E' suffix denotes the -40C to +125C extended operating temperature range, and the '/SS' suffix denotes the 28-pin SSOP package. An 8-bit microcontroller is a microprocessor whose data bus, registers, and ALU operate on 8 bits at a time. Within the broader taxonomy, the PIC16F1713 belongs to Microchip's PIC16 mid-range MCU family, which sits between the smaller PIC10/12 baseline family and the higher-performance PIC18 family. Microcontrollers of this class integrate CPU, Flash program memory, RAM, ADC/DAC, timers, and communication peripherals on a single die, replacing many discrete components in embedded designs. Key features include 4 KB (7 KB total, with 4K x 14 word addressing) of Flash memory, hardware op-amps for signal conditioning, 10-bit ADC with computation, high-speed comparators, PWM/CCP, and multiple communication interfaces including EUSART, I2C, and SPI. The XLP (eXtreme Low Power) technology delivers nanoWatt sleep currents for battery-powered applications. The 28-SSOP package measures 0.209 inches (5.30 mm) in body width. The PIC16F1713 uses a Harvard architecture RISC core with a 14-bit instruction word, enabling compact code density. Its on-chip op-amps allow analog front-end design without external amplifiers, while the CLC, COG, NCO, and ZCD peripherals implement state machines and waveform generation without CPU intervention, reducing firmware complexity and improving determinism. Typical applications include sensor signal conditioning with on-chip op-amps, LED driving with hardware PWM, motor control using the Complementary Output Generator (COG), low-power IoT battery nodes, and industrial control with Core Independent Peripherals. The PPS feature allows peripheral I/O mapping to nearly any pin, simplifying PCB routing. When selecting this part, note the extended temperature grade ('-E') suits industrial and automotive under-hood environments. For -40C to +85C commercial-industrial grade, consider the '-I' variant; for the smaller 28-QFN package, look at PIC16F1713-E/ML or PIC16F1713-E/MV. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes not found in the manufacturer datasheet alone.

Angebot Kontakt

PIC16F1713-I/SO

PIC16F1713-I/SO - 8-Bit 32MHz MCU 7KB Flash 28-SOIC | Microchip

The Microchip Technology PIC16F1713-I/SO is an 8-bit enhanced mid-range PIC16 microcontroller built on the nanoWatt XLP extreme-low-power technology platform, delivering 32 MHz CPU performance with 7 KB (4K x 14 words) of Flash program memory in a 28-pin SOIC package. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and a rich set of digital and analog peripherals. PIC16F1xxx family parts sit in the enhanced mid-range tier of Microchip's 8-bit portfolio, sitting hierarchically between baseline PIC10/12/16 and advanced PIC18/dsPIC, making them suitable for cost-sensitive, low-power embedded designs. The "F" denotes Flash program memory allowing in-circuit re-programmability, while the "XLP" branding indicates nanoWatt technology optimized for battery-powered applications. Key differentiating features of the PIC16F1713 include integrated op-amps, a 10-bit ADC with computation, two 8-bit and one 10-bit DAC, two comparators, Core Independent Peripherals (CLC, COG, NCO, Zero-Cross Detect), and Peripheral Pin Select (PPS) for flexible signal routing. The device offers 512 bytes RAM, 128 bytes EEPROM, and runs from 2.3V to 5.5V with typical active current under 1 mA at 32 MHz and sleep currents in the nanoamp range. Industrial temperature grade covers -40C to +85C. Architecturally, the PIC16F1713 uses a Harvard RISC core with a 200 ns instruction cycle, separate program and data buses, and a deep 14-bit instruction word. PPS remaps digital peripherals to virtually any I/O pin, simplifying PCB layout. The op-amps can be paired with the 10-bit ADC to form closed-loop signal conditioning without external analog ICs, while CLC blocks allow logic functions to be implemented in hardware, offloading the CPU. Typical applications include IoT sensor nodes, battery-powered handheld instruments, LED lighting control, small appliance motor control, and industrial sensor interfaces. The XLP current profile makes the part well-suited for energy-harvesting and remote-control products where standby time dominates the operating budget. When designing with the PIC16F1713, place a 0.1 uF decoupling capacitor within 5 mm of VDD and reserve the ICSP/ICD pins (RB6/RB7 on most pinouts) for debug headers during prototyping. Verify the PPS assignments in code rather than assuming default mappings, as PPS is the most common source of "no signal" debug confusion. This page synthesizes distributor pricing snapshots, drop-in PIC16F17xx family alternatives, and practical analog-mixing design notes not found in the manufacturer datasheet alone.

Angebot Kontakt

PIC16F1713-I/SP

PIC16F1713-I/SP - 8-Bit 32MHz MCU 7KB Flash 28-SPDIP | Microchip

The Microchip Technology PIC16F1713-I/SP is an 8-bit enhanced mid-range CMOS flash microcontroller built on the PIC® RISC architecture, delivering 32MHz operation with 200ns instruction execution in a 28-pin SPDIP (SP) through-hole package. The device integrates 7KB (4K x 14 words) of Flash program memory, 512 bytes of SRAM, and on-chip op amps, making it a self-contained analog-plus-logic solution for cost-sensitive embedded designs. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, Flash program memory, and peripherals onto one die. Within the broader taxonomy, the PIC16F1713 belongs to the 8-bit MCU -> microcontroller -> embedded processor -> semiconductor hierarchy. The "enhanced mid-range" PIC16 family uses a 14-bit instruction word that balances code density with peripheral richness, fitting between the baseline PIC10/12/16 and the 16-bit PIC24/dsPIC lines. Key features include 17-channel 10-bit ADC, two on-chip operational amplifiers with 3MHz gain-bandwidth, two high-speed comparators, a 16-bit Numerically Controlled Oscillator (NCO), Core Independent Peripherals (CLC, COG, Zero-Cross Detect), and Peripheral Pin Select for flexible signal routing. The XLP (eXtreme Low Power) technology delivers nanoWatt sleep currents below 50nA typical, with active current around 1.6mA at 32MHz. The PIC16F1713 employs a Harvard architecture with separate program and data buses, a hardware stack, and 49 instruction set variants. Hardware multiplier support is absent, but bit-oriented operations, indexed addressing, and single-cycle branching simplify firmware. The device operates from 1.8V to 5.5V across the industrial -40C to +85C temperature range. Typical applications include consumer appliance control, low-cost sensor conditioning with on-chip op amps, LED lighting with COG peripheral, battery-powered IoT edge nodes benefiting from XLP sleep, HVAC thermostat signal chains, and general-purpose replacement of discrete analog + MCU boards. The combination of analog and digital on one die reduces BOM cost and PCB area in space-constrained products. When designing with this device, ensure MPLAB X IDE and XC8 compiler compatibility, and budget Flash endurance at 10,000 erase/write cycles minimum for field-upgradable firmware. The 28-SPDIP package suits through-hole prototyping, hand-rework, and educational labs; for high-volume surface-mount, use the SOIC-28 variant PIC16F1713-I/SO. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone. Engineers evaluating PIC16F1713-I/SP versus PIC16F1716, PIC16F1709, or PIC16F1615 families will find the comparison_table and design_notes sections useful for fast BOM decisions.

Angebot Kontakt

PIC16F1713T-I/ML

PIC16F1713T-I/ML - 8-Bit 32MHz 7KB Flash MCU | Microchip

The Microchip PIC16F1713T-I/ML is an 8-bit PIC microcontroller from the PIC® XLP™ 16F family that integrates 7KB (4K x 14) of Flash program memory, 32 MHz maximum CPU speed, and a rich set of on-chip intelligent analog peripherals in a 28-pin 6x6 mm QFN package with exposed thermal pad. It is engineered to combine extreme low power (XLP) operation with high analog integration, targeting general-purpose applications that demand flexible mixed-signal performance in a compact footprint. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (typically Flash), data memory (SRAM), non-volatile EEPROM, and a suite of on-chip peripherals such as timers, ADC, communication interfaces, and I/O. PIC microcontrollers from Microchip use a RISC-based 8-bit core with a 14-bit instruction word, classified within the 8-bit MCU segment of the broader microcontroller > embedded controller > semiconductor taxonomy. The PIC16F1713 belongs to the mid-range PIC16 enhanced family, bridging the gap between baseline PIC10/12/16 and the higher-performance PIC18/dsPIC families. Key features include on-chip operational amplifiers (Op Amps), Core Independent Peripherals (CLC, COG, NCO and Zero Cross Detect), Peripheral Pin Select (PPS), a 10-bit ADC with computation, 8-bit DAC, comparators, and PWM/Signal Measurement Timers. The XLP technology delivers nanoWatt deep-sleep currents suitable for battery-powered sensor nodes and IoT edge devices. Memory-mapped peripherals and PPS enable flexible routing of digital functions to physical pins without rewiring the PCB. Architecturally, the PIC16F1713 uses Microchip's enhanced mid-range core with a 14-bit instruction set, hardware multiplier, and 16-level stack. The 'T' suffix denotes tape-and-reel packaging for high-volume assembly, while the 'I' grade specifies the industrial temperature range (-40 °C to +85 °C). The 28-QFN package exposes the die ground pad to improve thermal dissipation and electrical grounding for noise-sensitive analog designs. Typical applications include sensor signal conditioning with on-chip op-amps, LED lighting control using COG and PWM, low-power IoT battery nodes, motor control signal generation, and general-purpose mixed-signal embedded systems. Designers favor this part when the on-chip analog integration eliminates external components and reduces BOM cost. When designing, place decoupling capacitors within 2 mm of each VDD pin and provide a low-impedance ground pour under the exposed pad. PPS reassignment must respect the peripheral-to-pin mapping table in the datasheet; consult Microchip MPLAB X IDE Configurator Code for the supported mappings. This page synthesizes distributor pricing, drop-in alternatives across the PIC16F171x family, and practical design notes compiled from the manufacturer datasheet and verified distributor data not aggregated on any single vendor page.

Angebot Kontakt

PIC16F1713T-I/MV

PIC16F1713T-I/MV - 8-bit MCU, 32MHz, 7KB Flash, 28-UQFN | Microchip

The Microchip Technology PIC16F1713T-I/MV is an 8-bit PIC microcontroller from the PIC16F171X family, operating at up to 32 MHz and integrating 7 KB Flash, 512 B RAM, and 256 B EEPROM in a 28-pin UQFN (4x4 mm) package with exposed pad. It features on-chip operational amplifiers, a 10-bit ADC, a 5/8-bit DAC, a high-speed comparator, Core Independent Peripherals (CLC, NCO, Zero-Cross Detect, COG), PWM, CCP, and communication peripherals including EUSART, I2C and SPI, supported by Peripheral Pin Select for flexible pin mapping. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory, working RAM, and programmable peripherals into a single device, forming the lowest tier of the embedded computing hierarchy alongside microprocessors, SoCs and DSPs. The PIC16F1713 belongs to the broader 8-bit microcontrollers category (MCU -> 8-bit MCU -> PIC16 -> PIC16F171X), which typically trades raw performance for low power consumption, deterministic behaviour, and small code footprint - characteristics that make 8-bit parts popular in cost-sensitive, battery-powered, and real-time-control designs. Key specifications of the PIC16F1713T-I/MV include 25 general-purpose I/O lines, an extended supply-voltage range from 2.3 V to 5.5 V, XLP (eXtreme Low Power) technology, a 10-bit ADC with up to 17 channels, and a 32 MHz internal oscillator. The 'T' suffix designates Tape & Reel packaging for high-volume automated assembly, while 'I' indicates the industrial operating temperature range of -40C to +85C, and 'MV' denotes the UQFN-28 package. Architecturally, the device uses a 14-bit instruction word PIC16 core with a modified Harvard architecture and an 8-bit data path, complemented by a hardware multiplier and direct memory access support. The combination of on-chip analog (op-amps, DAC, ADC) with digital Core Independent Peripherals allows designers to implement sensor conditioning, signal generation, and control loops without external components. Typical applications include LED lighting control, sensor signal conditioning, low-power IoT endpoints, consumer appliance control, battery chargers, fan and pump control, and small motor drivers. The combination of integrated op-amps, DAC and high-speed comparator enables closed-loop analog control tasks that traditionally required dedicated analog ICs. When designing with this part, engineers should evaluate the op-amp output drive capability versus the application load, leave headroom on the ADC input range to avoid saturation, and use Peripheral Pin Select (PPS) to remap EUSART and SPI functions and simplify PCB routing. The exposed thermal pad of the UQFN-28 package must be soldered to the PCB ground plane to meet the datasheet's thermal and electrical specifications. This page synthesises distributor pricing, pin-compatible drop-in alternatives sourced from verified web data, and practical design notes that complement (rather than duplicate) the manufacturer datasheet.

Angebot Kontakt

PIC16F1713T-I/SS

PIC16F1713T-I/SS - 8-bit MCU, 7KB Flash, 32MHz, 28-SSOP | Microchip

The Microchip Technology PIC16F1713T-I/SS is an 8-bit PIC microcontroller featuring 7KB (4K x 14) of Flash program memory, 512 bytes of RAM, and a maximum CPU clock of 32MHz, housed in a 28-pin SSOP (Shrink Small Outline Package). It belongs to the PIC16F171x family that combines "Intelligent Analog" integration with eXtreme Low Power (XLP) technology for general-purpose embedded designs. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals around an 8-bit data bus. Within the broader semiconductor taxonomy, MCUs sit inside the Integrated Circuits > Microcontrollers category, which itself belongs to the embedded computing hierarchy of processors, controllers, and finally semiconductors. The PIC16F1713 family specifically targets cost-sensitive analog-heavy applications where on-chip op-amps, DACs, and comparators eliminate external analog ICs. Key features include integrated op-amps, a 10-bit ADC with up to 17 channels, 5-bit and 8-bit DACs, two high-speed comparators, Core Independent Peripherals (CLC, COG, NCO, Zero Cross Detect), Peripheral Pin Select (PPS), and dual CCP/PWM modules. Communication interfaces include EUSART, I2C, and SPI. The XLP sleep current is typically below 50 nA, enabling years of battery life in always-on sensor nodes. Architecturally, the PIC16F1713 uses Microchip's enhanced mid-range 8-bit core with a 14-bit instruction word and a hardware multiplier. The CLC (Configurable Logic Cell) and NCO (Numerically Controlled Oscillator) peripherals operate without CPU intervention, allowing deterministic timing for motor control, lighting, and power-conversion feedback loops without software overhead. Typical applications include LED lighting drivers, battery chargers, sensor signal conditioning, small motor control (fans, pumps), home appliances, and IoT edge nodes. The integrated op-amp + DAC + ADC + ZCD chain enables single-chip closed-loop constant-current LED drivers and zero-cross SSRs without any external analog components. When designing with this part, allocate the PPS mapping carefully: many analog peripherals share pins, and remapping mid-design requires re-validating the PCB layout. The 28-SSOP footprint also limits I/O count to roughly 25 usable pins, so dense HMI designs should consider the 40-pin PIC16F1716 variant. This page synthesizes distributor pricing, drop-in SSOP-28 alternatives, and practical design notes not found in the standalone manufacturer datasheet, giving engineers a faster decision path.

Angebot Kontakt

PIC16F1716-E/ML

PIC16F1716-E/ML - 8-Bit MCU, 14KB Flash, 32MHz, 28-QFN | Microchip

The Microchip Technology PIC16F1716-E/ML is an 8-bit PIC® XLP™ microcontroller with 14KB (8K x 14) of Flash program memory, 1KB of RAM, and a maximum CPU clock of 32MHz, housed in a 28-pin QFN (6x6 mm) package. The device integrates Intelligent Analog peripherals including on-chip operational amplifiers, a 10-bit ADC, 5-bit and 8-bit DACs, high-speed comparators, and Core Independent Peripherals (CLC, COG, NCO, Zero Cross Detect), providing extensive analog and digital signal-chain flexibility for cost-sensitive embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and peripheral interfaces (ADC, timers, communication buses) into one package. Within the broader taxonomy it belongs to the class of embedded controllers, a subset of microprocessors, which are themselves a subset of digital semiconductors. The PIC16F family sits in the 8-bit mid-range category, optimized for low-power and cost-effective general-purpose applications, sitting above PIC10/12 baseline parts and below the PIC18 and PIC32 16/32-bit families. Key features include eXtreme Low Power (XLP) technology for battery-friendly operation, Peripheral Pin Select (PPS) for flexible signal routing, multiple communication interfaces (I²C, SPI, UART), and enhanced PWM/CCP modules for motor and lighting control. The integrated op amps and DACs enable closed-loop analog control without external components, while CLC/NCO/COG peripherals implement complex logic, frequency synthesis, and waveform generation in hardware without CPU intervention. The PIC16F1716 architecture is built on an enhanced mid-range 8-bit core with a 14-bit instruction word, a hardware stack, and Harvard bus structure. It supports in-circuit serial programming (ICSP) and in-circuit debugging via ICD, allowing firmware updates after PCB assembly. Internal voltage reference and zero-cross detect support direct mains-coupled signal conditioning. Typical applications include LED lighting control, battery-powered sensor nodes, consumer appliances, industrial control loops, and small motor drives. The combination of on-chip op amps, DAC, and PWM simplifies mixed-signal designs. When designing with this MCU, ensure decoupling capacitors (100 nF and 10 µF) are placed close to VDD/AVDD pins, and configure unused I/O as outputs low to minimize current draw. PPS must be remapped before peripheral enable to avoid unintended signal conflicts. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet, with values verified against Microchip's official 28-pin PIC® (L)F170x/171x datasheet family.

Angebot Kontakt

PIC16F1716-E/MV

PIC16F1716-E/MV - 14KB Flash 8-bit MCU w/ Op Amps | Microchip

The Microchip Technology PIC16F1716-E/MV is an 8-bit PIC microcontroller from the PIC16F171X family, integrating 14KB of Flash program memory, 1KB of RAM, and a rich set of Core Independent Peripherals (CIPs) including Configurable Logic Cells (CLC), Complementary Output Generator (COG), Numerically Controlled Oscillator (NCO), and Zero Cross Detect (ZCD). The device operates at speeds up to 32 MHz and is housed in a 28-pin UQFN (MV) package with an exposed pad, supporting surface-mount assembly in compact board layouts. A microcontroller (MCU) is a single-chip computer that integrates a processor core, RAM, non-volatile memory, and peripherals onto one silicon die. The PIC16F1716 belongs to the "8-bit intelligent analog" category, a class of MCUs that combine traditional digital control with on-chip analog peripherals such as operational amplifiers, 10-bit ADCs, 5/8-bit DACs, and high-speed comparators. Within the broader semiconductor taxonomy, an MCU sits below microprocessors (which lack integrated memory) and above discrete logic in integration level, serving as the programmable decision-making element in embedded systems. Key features include on-chip op amps that eliminate external signal-conditioning components, Peripheral Pin Select (PPS) for flexible pin mapping, and Microchip's eXtreme Low Power (XLP) technology that achieves nanoWatt sleep currents suitable for battery-powered applications. The 10-bit ADC and high-speed comparator allow direct interfacing with analog sensors, while the 5/8-bit DAC enables analog waveform generation for control loops. Architecturally, the PIC16F1716 uses a RISC-based Harvard processor core with 49 instructions and a 16-level hardware stack. The 32 MHz operation delivers 8 MIPS of throughput, sufficient for sensor processing and PID control loops. Integrated Core Independent Peripherals can operate without CPU intervention, reducing firmware complexity and freeing the core for higher-level tasks. Typical applications include sensor signal conditioning with on-chip op amps, LED lighting control using the COG peripheral, motor control loops with PWM and comparator feedback, and general-purpose IoT endpoints where low power consumption is critical. The combination of intelligent analog and CIPs makes this MCU particularly suited for cost-sensitive mixed-signal designs. When designing with this device, place decoupling capacitors within 2 mm of each VDD pin and use the exposed pad to minimize thermal resistance. The PPS feature allows pin reassignment but requires care to avoid conflicts between peripherals sharing alternate pins. This page synthesizes distributor pricing, drop-in alternatives from the PIC16F170X/171X family, and practical design notes not found in the manufacturer datasheet alone.

Angebot Kontakt

PIC16F1716-E/SO

PIC16F1716-E/SO - 8-bit MCU, 14KB Flash, 32MHz, 28-SOIC | Microchip

The Microchip Technology PIC16F1716-E/SO is an 8-bit PIC microcontroller built on the enhanced mid-range core, integrating 14KB Flash program memory with 1KB RAM and 32 MHz operation in a 28-pin SOIC (SO) package. It belongs to the PIC16F170X/171X family of cost-effective Intelligent Analog flash MCUs and ships with extended temperature range silicon (the -E suffix denoting -40°C to +125°C operation). What is a PIC16 8-bit MCU? PIC16F microcontrollers are 8-bit RISC microcontrollers built on Microchip's enhanced mid-range core with a 14-bit instruction word. They sit between baseline PIC10/12/16 devices and the higher-end PIC18 family. The PIC16F1716 belongs to the Intelligent Analog sub-line that integrates op-amps, comparators, 10-bit ADC, 5/8-bit DAC and Core Independent Peripherals (CLC, COG, NCO, ZCD), giving designers analog signal conditioning and PWM/timing blocks without external ICs. Key features include 14KB (8K x 14) Flash, 1KB RAM, 32 MHz internal oscillator, Peripheral Pin Select (PPS) for flexible signal routing, and the XLP eXtreme Low Power suite. Per the manufacturer product page, the device is positioned as "Intelligent Analog integration with low cost and extreme low power (XLP) to suit a variety of general purpose applications." It also includes two on-chip op-amps, two high-speed comparators, a 10-bit ADC, 5-bit and 8-bit DACs, CCP/PWM, COG (Complementary Output Generator), NCO (Numerically Controlled Oscillator), CLC (Configurable Logic Cell), Zero Cross Detect (ZCD), EUSART, I²C and SPI. The architecture pairs a Harvard RISC pipeline with 49 instructions and 16-level hardware stack. PPS enables digital peripheral I/O remapping post-reset — useful when laying out mixed-signal boards. The integrated op-amps and high-speed comparators are key differentiators over the baseline PIC16F170X line, allowing sensor signal chains and zero-cross AC detection with no external analog IC. Typical applications include sensor conditioning front-ends, AC line zero-cross switching, LED lighting control with CLC-driven COG/PWM, low-power IoT nodes (XLP run/sleep modes), general-purpose motor control signal generation, and mixed-signal instrumentation. The -E industrial temperature grade (–40°C to +125°C) supports deployment in outdoor, automotive cabin, and industrial cabinet environments. When designing with this part, plan ICSPDAT/ICSPCLK access on dedicated pins (or PPS-mapped equivalents) and reserve adequate Flash for your bootloader. The 28-SOIC requires hand-solder rework considerations; consider the SPDIP or SSOP variants for breadboard prototyping. This page synthesizes distributor pricing, package-specific drop-in alternatives, and practical design notes that complement (rather than duplicate) the manufacturer datasheet.

Angebot Kontakt

PIC16F1716-E/SS

PIC16F1716-E/SS - 8-bit MCU, 14KB Flash, 28-SSOP | Microchip

The Microchip PIC16F1716-E/SS is an 8-bit flash microcontroller from the PIC16F1713/6 family that combines Intelligent Analog integration with extreme low power (XLP) technology in a 28-pin SSOP package. It integrates 14 KB of program flash, 1 KB of RAM, on-chip operational amplifiers, a 10-bit ADC with computation (ADC^2), and Core Independent Peripherals (CLC, COG, NCO, Zero Cross Detect) with Peripheral Pin Select for flexible signal routing. The device operates up to 32 MHz instruction clock and supports a wide 1.8V-5.5V supply range. A PIC16F-series microcontroller is an 8-bit Harvard-architecture MCU with on-chip flash program memory and integrated peripherals, sitting in the hierarchy: microcontroller -> embedded microcontroller -> 8-bit MCU -> PIC16 family -> PIC16F171X sub-family. The 'F' suffix denotes flash-based reprogrammable memory; the '1716' identifies the specific device within Microchip's PIC16 enhanced mid-range core family. Key features include two on-chip op-amps configurable as amplifiers, comparators, or ADC drivers, a 10-bit PWM module, Complementary Output Generator (COG) for power-conversion timing, Numerically Controlled Oscillator (NCO) for fine frequency synthesis, Configurable Logic Cells (CLC) for glue-less logic, Zero-Cross Detect (ZCD) for AC-line synchronization, and Peripheral Pin Select (PPS) for pin-function remapping. The 1716 variant offers more memory and I/O than the 1713 sibling in the same package. Architecturally, the PIC16F1716 uses Microchip's enhanced mid-range core (49 instructions, 16-bit opcode) with a hardware multiplier and C compiler-friendly architecture. The 'intelligent analog' peripherals let the device replace several external analog ICs, reducing BOM cost in sensor-interface and motor-control designs while still consuming under 1 uA in sleep mode (XLP). I2C, SPI, and EUSART connectivity with PPS routing enables flexible PCB layouts. Typical applications include low-cost sensor signal conditioning with on-chip op-amps, AC-line zero-cross switching with ZCD, LED lighting control with PWM and COG, battery-powered IoT sensor nodes leveraging XLP sleep current, and small motor-control loops. The 28-SSOP footprint makes it well suited for hand-soldered prototypes and production through-hole or socketed designs. When designing with the PIC16F1716-E/SS, allocate at least 4 decoupling caps (100 nF per VDD pair plus a bulk 10 uF) within 5 mm of the package and respect the device's maximum 32 MHz Fosc for timing-sensitive peripherals. The ZCD and COG peripherals require specific PWM initialization sequences for safe AC mains interfacing. This page synthesizes SSOP-28 pin-level details, distributor pricing, drop-in alternatives from the PIC16F171X family, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt

PIC16F1716-I/ML

PIC16F1716-I/ML - 8-Bit 32MHz MCU, 14KB Flash, 28-QFN | Microchip

The Microchip Technology PIC16F1716-I/ML is an 8-bit PIC16F microcontroller featuring 14KB (8K x 14) of Flash program memory, 1KB of RAM, and a 32 MHz internal oscillator, packaged in a 28-pin QFN (6x6 mm) with an exposed thermal pad. It is part of the PIC® XLP™ (eXtreme Low Power) family, delivering Intelligent Analog integration with on-chip op amps, 10-bit ADC, 5/8-bit DAC, Core Independent Peripherals (CLC, COG, NCO, Zero Cross Detect), and Peripheral Pin Select (PPS), providing exceptional design flexibility for general-purpose applications. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash), data memory (RAM), and peripherals onto one silicon die. The PIC16F family uses Microchip's enhanced mid-range RISC core executing one instruction per clock cycle (other than branched instructions), and falls within the broader hierarchy of microcontroller -> embedded controller -> semiconductor device. The 'F' suffix indicates Flash-based reprogrammable program memory, the '16' indicates the mid-range architecture family, and 'XLP' denotes Microchip's ultra-low-power technology platform that targets battery- and energy-harvesting applications. Key features include 14KB Flash, 1KB RAM, 1024 bytes of EEPROM, a 10-bit ADC with computation (ADC2), comparators, two on-chip operational amplifiers, a 5-bit and 8-bit DAC, four 16-bit timers, two CCP modules, and serial interfaces including I2C, SPI, and EUSART. The 32 MHz internal oscillator drives a 62.5 ns instruction cycle, and the device operates across 2.3V to 5.5V. The 28-QFN package supports industrial temperature operation from -40 °C to +85 °C. Architecturally, the PIC16F1716 integrates a 49-instruction enhanced mid-range core with a 14-bit instruction word, hardware multiplier, and interrupt controller. Peripheral Pin Select (PPS) allows digital peripheral pins to be remapped to general-purpose I/O, simplifying PCB routing. Core Independent Peripherals (CIPs) such as the Configurable Logic Cell (CLC), Complementary Output Generator (COG), and Numerically Controlled Oscillator (NCO) execute tasks without CPU involvement, reducing firmware complexity and improving determinism. Typical applications include sensor signal conditioning with on-chip op amps, LED lighting control via COG and PWM, low-power IoT edge nodes, consumer appliances, battery chargers, and general-purpose embedded control. The combination of analog integration and XLP technology makes the part well suited for products that require both signal processing and long battery life. When designing with this device, place decoupling capacitors (100 nF and 10 µF) close to the VDD/VSS pins and connect the QFN exposed pad to a solid ground plane for thermal and electrical performance. PPS configuration must be locked at runtime to prevent accidental remapping, and unused op-amp and DAC outputs should be disabled in firmware to minimize quiescent current in XLP applications. This page synthesizes distributor pricing, drop-in same-package alternatives, parametric comparison data, and practical design notes that supplement the Microchip PIC16F1716 datasheet.

Angebot Kontakt

PIC16F1716-I/MV

PIC16F1716-I/MV - 8-Bit 32MHz MCU, 14KB Flash, Op Amps | Microchip

The Microchip Technology PIC16F1716-I/MV is an 8-bit PIC® XLP™ 16F microcontroller integrating 14KB Flash program memory, 1KB RAM, and a rich set of intelligent analog peripherals in a compact 28-pin UQFN (4x4 mm) package with an exposed thermal pad. It executes instructions at up to 32 MHz and operates from 2.3V to 5.5V, combining intelligent analog integration with extreme low power (XLP) for cost-sensitive general-purpose designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (typically Flash), working RAM, and a configurable set of digital and analog peripherals around a compact core. The PIC16F1716 belongs to the 8-bit PIC16 family — part of the broader category of microcontrollers -> microprocessors -> semiconductor devices -> integrated circuits. The 8-bit PIC architecture is well known for deterministic instruction timing, ease of use in C or assembly, and very low sleep currents that suit battery-powered and energy-harvesting products. Key features include two on-chip operational amplifiers (Op Amps) that eliminate external analog front-end components, a 10-bit ADC with computation (ADC2), 5-bit and 8-bit DACs, two high-speed comparators, a numerically controlled oscillator (NCO), complementary output generator (COG), zero-cross detect (ZCD), configurable logic cells (CLC), peripheral pin select (PPS), and EUSART/I²C/SPI interfaces. These core-independent peripherals allow complex timing and signal-conditioning tasks to run autonomously without CPU intervention, freeing the core for application logic. Typical applications include LED lighting controllers, sensor conditioning with on-chip op amps, low-power IoT sensor nodes, white-goods user-interface boards, battery chargers, and small motor control loops. The exposed thermal pad aids heat spreading when the device drives outputs near its full rating, and the 4x4 mm UQFN footprint is among the smallest in the PIC16 line, enabling dense PCB layouts. When designing with this MCU, place the VDDCORE decoupling capacitor as close as possible to pin 20 and route analog/digital grounds thoughtfully because the op amps share the analog supply domain. PPS allows most digital peripherals to be remapped to nearly any I/O pin, which simplifies PCB routing and lets one layout support multiple firmware variants.

Angebot Kontakt

PIC16F1716-I/SO

PIC16F1716-I/SO - 8-Bit 32MHz 14KB Flash MCU | Microchip

The Microchip Technology PIC16F1716-I/SO is an 8-bit PIC microcontroller featuring 14KB (8K x 14) of Flash program memory, 1KB of RAM, and a 32MHz internal oscillator, housed in a 28-pin SOIC (0.295" / 7.50mm body width) package. The device integrates Intelligent Analog peripherals including on-chip operational amplifiers and a 10-bit ADC with computation, making it well-suited for mixed-signal embedded designs. According to the Microchip product page, the PIC16F1716 also exposes Core Independent Peripherals such as the Configurable Logic Cell (CLC), Complementary Output Generator (COG), Numerically Controlled Oscillator (NCO), and Zero Cross Detect, all accessible via Peripheral Pin Select (PPS) for flexible I/O mapping. The -I suffix denotes the industrial temperature grade (-40C to +85C), while the /SO suffix identifies the 28-pin SOIC package. What is an 8-bit intelligent analog microcontroller? It is a microcontroller that combines a traditional CPU core with on-chip analog signal-conditioning blocks (op-amps, comparators, ADC, DAC), so the device can both digitize sensors and drive analog outputs without external amplifier ICs. In the broader taxonomy, the PIC16F1716 sits at the junction of microcontroller (MCU), mixed-signal IC, and embedded control SoC, descending from Microchip's PIC® 16F mid-range family and the PIC® XLP™ extreme-low-power lineage. Key features include 4 op-amps integrated on-chip, 8-bit slope-compensated PWM, 10-bit ADC with computation (ADC^2) for hardware-averaging oversampling, and a 5-bit DAC reference. The XLP technology enables a typical sleep current in the nanoampere range, ideal for battery-powered applications such as IoT sensors and remote controls. The 28-SOIC footprint maintains hand-solderable and breadboard-friendly form factor for prototypes and small production runs. Typical applications include consumer appliances, motor control (small DC and stepper drives), LED lighting controllers, sensor signal conditioning, battery chargers, smoke/CO detectors, and low-power IoT nodes. The combination of on-chip analog, Core Independent Peripherals, and PPS allows designers to reduce external component count and BOM cost while shortening firmware development cycles. A key design consideration is PPS routing: not every peripheral can be mapped to every pin, so the firmware configuration must respect the pin assignment matrix published in the datasheet. Always reserve sufficient I/O for debug (ICSP) when laying out a board. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt

PIC16F1716-I/SP

PIC16F1716-I/SP - 32MHz 8-bit MCU, 14KB Flash, 28-SPDIP | Microchip

The Microchip Technology PIC16F1716-I/SP is an 8-bit enhanced mid-range PIC16 microcontroller built on the PIC® RISC architecture, delivering 32 MIPS at 32 MHz internal clock with 200 ns instruction execution. It integrates 14 KB of Flash program memory, 1024 bytes of SRAM, and 256 bytes of EEPROM in a 28-pin SPDIP through-hole package. An 8-bit PIC microcontroller is a single-chip computer built around an 8-bit data path and Harvard RISC core, optimized for deterministic real-time control in cost-sensitive embedded systems. The PIC16F1716 sits in the broader hierarchy of 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. It belongs to the eXtreme Low Power (XLP) family designed for battery-powered and energy-harvesting applications where quiescent current directly determines field lifetime. Key specifications include 17 channels of 10-bit ADC, two 8-bit DACs, two operational amplifiers, two comparators, two 10-bit PWM modules, five timers, and an EUSART with auto-baud detection. Core Independent Peripherals (CIPs) such as the Configurable Logic Cell (CLC), Complementary Output Generator (COG), Numerically Controlled Oscillator (NCO), and Zero-Cross Detect enable complex waveform generation without CPU intervention. The device supports 1.8V to 5.5V operation across the industrial temperature range (-40°C to +85°C for the I-suffix) with a typical active current under 150 µA/MHz and sleep currents down to 20 nA with RTC enabled. The integrated op amps and DACs allow direct sensor signal conditioning on-chip, replacing external analog components and reducing PCB area and BOM cost. Typical applications include sensor signal conditioning nodes, IoT edge devices, low-cost motor and fan control, LED lighting drivers, smoke and gas detectors, and battery-powered instrumentation. The 28-SPDIP package simplifies breadboard prototyping and hand-soldered through-hole assembly for low-volume and hobbyist designs. When designing with this MCU, allocate the 14 KB Flash carefully - the standard XC8 compiler with optimization produces roughly 4-5 KB of code for typical embedded applications, leaving headroom for bootloader or field-upgrade partitions. The Peripheral Pin Select (PPS) feature allows remapping of digital peripherals to almost any I/O pin, simplifying PCB routing in space-constrained designs. This page synthesizes distributor pricing from DigiKey, Mouser, LCSC and Ampheo, parametric equivalents from the PIC16F1716 family, and practical design considerations that the manufacturer datasheet alone does not surface.

Angebot Kontakt

PIC16F1716-I/SS

PIC16F1716-I/SS - 8-bit MCU, 14KB Flash, 28-SSOP | Microchip

The Microchip Technology PIC16F1716-I/SS is an enhanced mid-range 8-bit PIC16 microcontroller (MCU) featuring 14KB of Flash program memory (8K x 14 words), 1KB of RAM, and a 32 MHz internal oscillator, housed in a 28-pin SSOP (Shrink Small Outline Package). It is part of the PIC16F170x/171x family that combines Intelligent Analog integration with extreme low power (XLP) technology. A microcontroller (MCU) is a single-chip computer containing a CPU, memory, and peripherals designed for embedded control. The PIC16F1716 belongs to the 8-bit MCU category, which uses an 8-bit data path. Within the broader semiconductor taxonomy, 8-bit MCUs sit under microcontrollers, then embedded processors, then integrated circuits. The 8-bit class remains dominant in cost-sensitive, low-power applications because of its small code footprint, deterministic interrupt latency, and decades of mature tool support. Key features include two on-chip operational amplifiers, two high-speed comparators, a 10-bit ADC with up to 28 channels, a 5-bit/8-bit DAC, Core Independent Peripherals (CLC, COG, NCO, Zero Cross Detect), and Peripheral Pin Select (PPS) for flexible signal routing. The XLP technology delivers nanoWatt sleep currents below 50 nA typical in deep sleep, enabling battery-powered designs to operate for years on a single cell. The architecture is built on Microchip's enhanced mid-range x14 instruction set, providing 200 ns instruction execution at 32 MHz, 49 instructions, and 14-bit-wide instruction words. This balance of code density and computational throughput suits mixed-signal sensor conditioning, closed-loop control loops, and human-machine interface tasks. Typical applications include industrial sensor conditioning, IoT edge nodes, low-power metering, building automation, motor control signal chains, and consumer white goods. The integrated op amps and comparators allow direct interface with bridge sensors, photodiodes, and thermistors without external analog front-end components. When designing with this device, allocate careful PCB layout around the analog inputs, keep analog and digital ground returns separated, and verify PPS remapping against your chosen peripheral set in MPLAB X IDE. The XLP sleep modes also require explicit clock-source configuration on wake-up to maintain firmware timing. This page synthesizes distributor stock, drop-in alternatives, and engineering design notes not consolidated on the manufacturer datasheet, giving procurement and design engineers a single reference for evaluating the PIC16F1716-I/SS against competitor and same-family options.

Angebot Kontakt

PIC16F1716T-I/SO

PIC16F1716T-I/SO - 8-Bit MCU, 14KB Flash, 32MHz | Microchip

The Microchip PIC16F1716T-I/SO is an 8-bit flash microcontroller (MCU) from the PIC16F171X family that combines Intelligent Analog integration with extreme low power (XLP) technology. It delivers 14KB of flash program memory (8K x 14 words), 1KB of RAM, and operates at up to 32MHz internal clock with a 200ns instruction cycle. The device is housed in a 28-pin SOIC (SO) wide-body package with industrial temperature grade (-40C to +85C). An 8-bit microcontroller is a programmable processor that integrates CPU, memory, and peripherals on a single silicon die. The PIC16F1716 belongs to the PIC16 family -> PIC microcontrollers -> 8-bit MCU -> microcontroller (MCU) -> embedded processor -> semiconductor hierarchy. XLP (Extreme Low Power) technology places the part in the broader low-power MCU category, designed for battery-powered and energy-harvesting applications where nanoamp sleep currents extend operating life. Key differentiating features include on-chip operational amplifiers (OPAmps), a high-speed comparator, a 10-bit ADC with automated hardware CVD, 5-bit and 8-bit DACs, Capture/Compare/PWM (CCP) modules, Numerically Controlled Oscillator (NCO), Complementary Output Generator (COG), Zero Cross Detect (ZCD), Configurable Logic Cells (CLC), and Peripheral Pin Select (PPS). Communication peripherals include EUSART, I2C, and SPI. The integrated Intelligent Analog blocks eliminate external op-amps and comparators in many signal-conditioning designs, reducing BOM cost and PCB area. The architecture is built on an enhanced mid-range x14 core, providing 49 instructions and 14-bit program word width. Core Independent Peripherals (CLC, NCO, COG) execute logic functions without CPU intervention, allowing the core to remain in sleep and further reducing system power. PPS allows peripheral pin remapping for flexible PCB layout and design reuse across pin-compatible PIC16F171X variants. Typical applications include LED lighting control, sensor signal conditioning, battery-powered IoT endpoints, capacitive-touch human interface, fan/small motor control, and general-purpose digital/analog mixed designs. The wide 1.8V-5.5V operating range and XLP sleep currents below 50nA (typical) suit coin-cell and energy-harvesting products. Design consideration: when migrating between PIC16F1716/1717/1718/1719 family members, the Peripheral Pin Select feature allows I/O reassignment to maintain a single PCB layout across pin-compatible devices. Designers should consult the PIC16F1716 datasheet pinout table for SP/ML/MV/SO/SS package variants before committing to a specific package. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt

PIC16F1716T-I/SS

PIC16F1716T-I/SS - 8-Bit 32MHz MCU 14KB Flash 28-SSOP | Microchip

The Microchip PIC16F1716T-I/SS is an 8-bit PIC® XLP™ flash microcontroller featuring 14KB (8K x 14 words) of program memory, 1KB of RAM, and a 32MHz internal oscillator, packaged in a 28-pin SSOP (SS) with tape-and-reel delivery. It integrates on-chip op amps, a 10-bit ADC, 5-bit and 8-bit DACs, and a wide range of core-independent peripherals (CLC, COG, NCO, ZCD) plus Peripheral Pin Select (PPS) for maximum routing flexibility. An 8-bit microcontroller (MCU) is a compact processor-on-a-chip built around an 8-bit data path, optimized for cost-sensitive embedded control rather than raw computational throughput. Within the embedded system hierarchy, the PIC16F1716T-I/SS belongs to Microchip's PIC16 enhanced mid-range family — a tier above baseline PIC10/12/14 parts and below the PIC18 line, bridging simple logic-replacement tasks and full-featured 16-bit DSC work. Its XLP (eXtreme Low Power) lineage targets battery-powered and energy-harvesting designs where nanoWatt sleep currents are essential. Key features of the PIC16F1716T-I/SS include intelligent analog integration with two on-chip operational amplifiers for sensor signal conditioning, a high-speed comparator, a 10-bit ADC, and 5/8-bit DACs for setpoint or waveform generation. The Core Independent Peripherals (CIPs) — Configurable Logic Cells (CLC), Complementary Output Generator (COG), Numerically Controlled Oscillator (NCO), and Zero Cross Detect (ZCD) — execute tasks without CPU intervention, freeing the core for application logic and reducing firmware complexity. eXtreme Low Power technology delivers sub-µA sleep currents and nanoWatt peripheral operation, ideal for IoT and battery applications. The device operates across 1.8V to 5.5V with up to 32MHz performance, supported by a wide peripheral set including CCP/PWM, EUSART, I2C, and SPI. The 28-SSOP footprint provides a compact, hand-solderable surface-mount option for prototyping and high-density production. Typical applications include sensor signal conditioning, low-power IoT edge nodes, LED lighting controllers, and consumer appliance front-panel interfaces. The combination of op amps + ADC + DAC in one package makes it particularly suitable for sensor-fusion and closed-loop control tasks. Designers should note that 'T' in the part number indicates tape-and-reel packaging, while 'I' denotes the industrial -40°C to +85°C temperature grade — confirm both designations align with your manufacturing and deployment environment before ordering. This page synthesizes verified distributor pricing, drop-in alternatives, and practical design notes beyond what the manufacturer datasheet provides in isolation, with full traceability back to Microchip's product documentation and authorized distributor listings.

Angebot Kontakt

PIC16F1717-E/P

PIC16F1717-E/P - 8-Bit MCU, 14KB Flash, 40-PDIP | Microchip

The Microchip PIC16F1717-E/P is an 8-bit PIC16F microcontroller in the Microchip XLP family that combines Intelligent Analog integration with 14 KB of Flash program memory in a 40-pin PDIP (P) through-hole package, operating at up to 32 MHz. It features on-chip operational amplifiers, two of which are integrated directly on-die for signal conditioning, plus core-independent peripherals such as Configurable Logic Cells (CLC), Complementary Output Generator (COG), Numerically Controlled Oscillator (NCO), and Zero-Cross Detect, with Peripheral Pin Select (PPS) enabling flexible I/O mapping. An 8-bit microcontroller is a single-chip computer that uses an 8-bit data path and a von Neumann or modified Harvard architecture to execute instructions on a CPU core, with on-chip Flash for program storage, SRAM for data, and a wide peripheral set. It sits in the hierarchy microcontroller -> microprocessor -> integrated circuit -> semiconductor, and the PIC16F1717 belongs to Microchip's PIC16F mainstream enhanced mid-range family targeting cost-sensitive general-purpose embedded applications where analog integration and ultra-low power are required. The device operates from 1.8 V to 5.5 V and consumes nanoWatt XLP sleep currents below 100 nA typical, allowing battery-powered designs to extend operating life for years. Key specifications include 14 KB (8K x 14 words) of self-programmable Flash, 1 KB of SRAM, 256 bytes of EEPROM, a 10-bit ADC with up to 28 channels, two on-chip op amps, two comparators, two 8-bit timers and one 16-bit timer, plus 35 digital I/O pins. The device supports I2C, SPI, and EUSART with PPS-mappable pins, includes a 5-bit DAC and 10-bit PWM, and operates across -40 C to +125 C industrial temperature range. Watchdog timer, brown-out reset, and in-circuit serial programming (ICSP) are also integrated. The architecture is built on an enhanced mid-range 8-bit PIC core with a 14-bit instruction word and a hardware stack, paired with a low-power analog engine that lets the op amps and ADC run while the CPU sleeps. This is the canonical pattern used in IoT edge nodes and sensor front-ends where analog signal chains must remain active while the CPU is dormant to minimize total system power. Peripheral Pin Select decouples digital peripheral routing from physical pinout, simplifying PCB layout and BOM variants. Typical applications include IoT sensor nodes with on-die op-amp signal conditioning, low-power battery-powered HVAC and thermostat controls, capacitive-touch user interfaces, LED lighting controllers using COG and PWM, motor control signal generation with NCO and PWM, factory automation edge modules, and consumer white goods where 5 V logic levels are still in use. The 40-pin PDIP form factor supports hand-prototyping, education labs, and legacy through-hole manufacturing lines. When designing with this part, ensure Vdd decoupling is placed within 5 mm of the package with both 100 nF and 10 uF capacitors. Reserve an ICSP header with Vpp, ICSPCLK, ICSPDAT, Vdd, and GND for field firmware updates, and verify that any analog pin assigned to an on-chip op amp is configured through the PMD and OPAxCON registers before enabling the peripheral. This page synthesizes distributor pricing, drop-in alternatives within the PIC16F171x family, and practical design notes not collected in a single manufacturer document.

Angebot Kontakt

PIC16F1717-E/PT

PIC16F1717-E/PT - 8-Bit 32MHz MCU, 14KB Flash, 44-TQFP | Microchip

The Microchip Technology PIC16F1717-E/PT is an 8-bit PIC microcontroller featuring 14 KB of Flash program memory, 1 KB of RAM, and 32 MHz operation speed, packaged in a 44-pin TQFP (10x10 mm). It is part of the PIC16F171XX family, which combines Intelligent Analog integration with extreme low power (XLP) technology, making it suitable for a broad range of general-purpose and sensor-driven applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (typically Flash), working RAM, and a rich set of programmable peripherals. The PIC16F1717 sits within the 8-bit MCU hierarchy, bridging simple 8-pin baseline devices and 16-bit or 32-bit microcontrollers. Within Microchip's taxonomy, it belongs to the PIC16 enhanced mid-range family, featuring the XLP ultra-low-power platform and a suite of Core Independent Peripherals (CIPs). Key features of the PIC16F1717-E/PT include on-chip operational amplifiers, a 10-bit ADC with computation, 5-bit and 8-bit DAC modules, high-speed comparators, two CCP modules with PWM, and the core-independent peripherals CLC (Configurable Logic Cell), COG (Complementary Output Generator), NCO (Numerically Controlled Oscillator), and Zero Cross Detect (ZCD). Peripheral Pin Select (PPS) allows flexible signal routing of digital peripherals to any I/O pin, dramatically simplifying board layout. Architecturally, the PIC16F1717 uses Microchip's enhanced mid-range 8-bit core with a 14-bit instruction word, executing instructions in a single instruction cycle except for branches and table reads. The on-chip op amps are rail-to-rail input/output and can be configured as independent amplifiers or as a dedicated PGA, reducing the need for external analog ICs. The ADC with computation integrates oversampling, averaging, and threshold comparison in hardware, enabling autonomous sensor acquisition without CPU intervention. Typical applications include precision sensor signal conditioning, LED lighting control with high-resolution PWM, low-power battery-powered IoT sensor nodes, white goods and appliance user interfaces, fan and pump control, and digital power conversion support. The on-chip op amps and 10-bit ADC make it especially attractive for thermocouple, RTD, and bridge-sensor front-ends. When designing with this part, note that the -E suffix denotes the extended operating temperature range (-40C to +125C), and the /PT suffix indicates a TQFP-44 package on tray packaging. Developers should install MPLAB X IDE and the XC8 compiler, and consult Microchip's Code Configurator (MCC) plug-in for graphical peripheral setup. The Intelligent Analog suite minimizes external component count, but careful PCB layout of analog grounds is still essential for ADC performance. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found on any single manufacturer or distributor product page, helping engineers evaluate the PIC16F1717-E/PT for sensor and general-purpose embedded designs.

Angebot Kontakt

PIC16F1717-I/MV

PIC16F1717-I/MV - 8-Bit 32MHz 14KB Flash MCU | Microchip

The Microchip Technology PIC16F1717-I/MV is an 8-bit PIC RISC microcontroller delivering 32MHz performance with 14KB of Flash program memory in a 40-pin UQFN (5x5mm) package with an exposed pad. Part of the PIC16F170X/171X family, this device combines Intelligent Analog integration with eXtreme Low Power (XLP) technology for general-purpose and automotive-grade applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash for program storage, SRAM for data, and EEPROM for non-volatile data), and programmable peripherals into one package. PIC microcontrollers from Microchip use a modified Harvard RISC architecture with a small, deterministic instruction set, and belong to the broader taxonomy: microcontroller -> embedded processor -> semiconductor device. The '16F' family is characterized by Flash program memory, mid-range core, and low pin-count variants ideal for cost-sensitive designs. Key features include on-chip operational amplifiers (Op Amps), a 10-bit ADC, a 5/8-bit DAC, high-speed comparators, and Core Independent Peripherals: Configurable Logic Cell (CLC), Complementary Output Generator (COG), Numerically Controlled Oscillator (NCO), and Zero Cross Detect (ZCD). Peripheral Pin Select (PPS) allows flexible signal routing, while XLP technology delivers typical sleep currents in the nanoamp range, suiting battery-powered applications. The 14KB Flash (8K x 14 words) supports in-circuit serial programming (ICSP). The architecture uses a 14-bit instruction word with a 32MHz internal oscillator, achieving up to 8 MIPS throughput. Peripherals communicate via PPS-mapped I/O to nearly any pin, simplifying PCB layout. Memory-mapped SFRs provide deterministic register access. The integrated op amps and 10-bit ADC enable direct sensor signal conditioning without external analog ICs. Typical applications include IoT sensor nodes, automotive sensor conditioning, LED lighting controllers, motor control loops, and battery-powered consumer devices. The automotive-grade -I/MV variant operates across -40C to +85C with AEC-Q100 qualification, suiting under-hood and cabin applications. Designers should leverage PPS to minimize PCB routing complexity and use the CLC for state-machine logic that runs without CPU intervention, reducing firmware complexity and power consumption. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the standalone manufacturer datasheet, helping engineers select and source the right MCU for cost-sensitive analog-rich embedded designs.

Angebot Kontakt

PIC16F1717-I/P

PIC16F1717-I/P - 32MHz 8-Bit Intelligent Analog MCU | Microchip

Microchip Technology PIC16F1717-I/P is a cost-effective 8-bit PIC microcontroller with Intelligent Analog integration, a 32 MHz operating speed, 14 KB of Flash program memory, 1 KB of RAM, and a 40-pin PDIP package. The device combines an XLP low-power architecture with on-chip operational amplifiers, a 12-bit differential ADC with computation, Core Independent Peripherals, and Peripheral Pin Select for adaptable low-cost embedded designs. A PIC microcontroller is an 8-bit embedded-processing device that combines a CPU, program memory, data memory, timers, serial interfaces, and analog functions on one integrated circuit. The PIC16F1717 belongs to the broader hierarchy of microcontrollers, embedded controllers, and semiconductor devices. Its low-power XLP characteristics and integrated analog peripherals make it suitable for general-purpose control systems where component count, board area, and power consumption are important design constraints. The most prominent device features include a 32 MHz instruction clock, 14 KB of Flash memory for program storage, and 1 KB of SRAM for working data. Integrated analog resources include operational amplifiers and a 12-bit differential Analog-to-Digital Converter with Computation. Core Independent Peripherals add programmable logic functions, including CLC, COG, NCO, and Zero Cross Detect, while Peripheral Pin Select allows supported digital functions to be assigned to alternate pins. The Intelligent Analog architecture can reduce the need for external analog components in measurement and control products. The internal ADC and amplifiers can process sensor signals, while programmable logic peripherals can handle timing, signal generation, or comparisons independently of the main instruction stream. This combination supports compact designs in which analog measurement and control functions must coexist with a general-purpose 8-bit control core. Typical applications include industrial sensor interfaces, temperature monitoring, building controls, consumer products, compact instrumentation, and low-power embedded controllers. The 40-pin PDIP package is particularly useful for prototypes, educational designs, through-hole assemblies, and systems that benefit from easy inspection or rework. The package also provides a generous pin count for analog, communications, control, and general-purpose I/O expansion. A principal design consideration is that the 40-pin PDIP footprint consumes more board area than modern surface-mount packages. Engineers should also budget decoupling capacitors, validate the operating voltage against the family data sheet, and use the family pin-description tables when assigning analog and multiplexed functions. Program development must account for the PIC16 architecture, supported peripherals, and required configuration settings. This product page consolidates the exact orderable MPN, core memory and speed specifications, verified source links, drop-in candidate assessment, and practical design guidance. It also distinguishes confirmed family-level information from orderable-package details so engineers can assess PCB reuse, firmware support, analog performance, and sourcing requirements before committing to a design.

Angebot Kontakt

Unterkategorien

Produkte (38.000+)

PIC16F1709T-I/SS - 8-bit 32MHz 14KB Flash MCU | Microchip

PIC16F1713-E/MV - 8-Bit XLP MCU 7KB Flash 28-UQFN | Microchip

PIC16F1713-E/SO - 8-Bit MCU, 32MHz, 7KB Flash, 28-SOIC | Microchip

PIC16F1713-E/SS - 8-bit MCU, 7KB Flash, 28-SSOP | Microchip

PIC16F1713-I/SO - 8-Bit 32MHz MCU 7KB Flash 28-SOIC | Microchip

PIC16F1713-I/SP - 8-Bit 32MHz MCU 7KB Flash 28-SPDIP | Microchip

PIC16F1713T-I/ML - 8-Bit 32MHz 7KB Flash MCU | Microchip

PIC16F1713T-I/MV - 8-bit MCU, 32MHz, 7KB Flash, 28-UQFN | Microchip

PIC16F1713T-I/SS - 8-bit MCU, 7KB Flash, 32MHz, 28-SSOP | Microchip

PIC16F1716-E/ML - 8-Bit MCU, 14KB Flash, 32MHz, 28-QFN | Microchip

PIC16F1716-E/MV - 14KB Flash 8-bit MCU w/ Op Amps | Microchip

PIC16F1716-E/SO - 8-bit MCU, 14KB Flash, 32MHz, 28-SOIC | Microchip

PIC16F1716-E/SS - 8-bit MCU, 14KB Flash, 28-SSOP | Microchip

PIC16F1716-I/ML - 8-Bit 32MHz MCU, 14KB Flash, 28-QFN | Microchip

PIC16F1716-I/MV - 8-Bit 32MHz MCU, 14KB Flash, Op Amps | Microchip

PIC16F1716-I/SO - 8-Bit 32MHz 14KB Flash MCU | Microchip

PIC16F1716-I/SP - 32MHz 8-bit MCU, 14KB Flash, 28-SPDIP | Microchip

PIC16F1716-I/SS - 8-bit MCU, 14KB Flash, 28-SSOP | Microchip

PIC16F1716T-I/SO - 8-Bit MCU, 14KB Flash, 32MHz | Microchip

PIC16F1716T-I/SS - 8-Bit 32MHz MCU 14KB Flash 28-SSOP | Microchip

PIC16F1717-E/P - 8-Bit MCU, 14KB Flash, 40-PDIP | Microchip

PIC16F1717-E/PT - 8-Bit 32MHz MCU, 14KB Flash, 44-TQFP | Microchip

PIC16F1717-I/MV - 8-Bit 32MHz 14KB Flash MCU | Microchip

PIC16F1717-I/P - 32MHz 8-Bit Intelligent Analog MCU | Microchip