Integrierte Schaltungen

PIC24EP512GU810T-I/PT

PIC24EP512GU810T-I/PT - 16-Bit 60 MIPS MCU, USB, Dual CAN, 100-TQFP | Microchip

The Microchip Technology PIC24EP512GU810T-I/PT is a 16-bit microcontroller from the PIC24E general-purpose family delivering up to 60 MIPS (70 MIPS peak) performance, 512 KB of Flash program memory, 52 KB of SRAM, integrated USB 2.0 full-speed OTG and dual CAN interfaces, housed in a 100-pin TQFP (12x12 mm) package with 83 general-purpose I/O pins. Tape-and-reel packaging; industrial -40C to +85C temperature grade; single 3.0V-3.6V supply (3.3V nominal). A PIC24E microcontroller is a 16-bit modified-Harvard RISC MCU purpose-built for embedded designs that demand real-time control plus connectivity. The PIC24E architecture (parent taxonomy: PIC24 -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor) pairs a 16-bit data path with a 24-bit instruction word, deterministic interrupt latency, and DSP-friendly instructions, sitting between 8-bit PIC MCUs and 32-bit ARM Cortex parts in capability and complexity. Key features include up to 83 I/O pins, 15 DMA channels that move peripheral data without CPU intervention, a 12-bit ADC capable of up to 1.1 Msps, 27 general-purpose timers (nine 16-bit), high-speed PWM, comparators, op-amps, a charge-time measurement unit (CTMU), and a Real-Time Clock/Calendar. Two CAN 2.0B controllers plus USB 2.0 full-speed OTG on a single 3.3V rail make this part attractive as a USB/CAN bridge. The PIC24E core uses a 7-stage pipeline, hardware multiply/divide, and a deterministic interrupt response. The 15-channel peripheral DMA engine lets the core sleep while peripherals stream data to/from RAM - ideal for sustained USB or CAN throughput without taxing the CPU. Typical applications include industrial automation (PLC modules, sensor hubs), automotive body and CAN gateways, USB-to-CAN bridges, motor control (BLDC and PMSM), medical instrumentation, consumer appliances with HMI displays, and high-density IoT edge nodes. When designing with this part, place a 1uF bulk plus a 0.1uF bypass capacitor adjacent to every VDD/VSS pin pair, route the 60 MHz crystal traces with short guarded paths, and use DMA to keep USB/CAN traffic off the core. This page synthesizes distributor pricing, drop-in alternatives within the PIC24E 100-pin TQFP family, and practical design notes not found in the manufacturer datasheet alone.

Angebot Kontakt

PIC24EP512GU814-E/PL

PIC24EP512GU814-E/PL - 16-Bit MCU, 512KB Flash, USB, 2x CAN | Microchip

The Microchip PIC24EP512GU814-E/PL is a high-performance 16-bit microcontroller from the PIC24EP family, delivering up to 70 MIPS from a 3.3V supply. It integrates 512 KB of Flash program memory and 52 KB of SRAM, housed in a 144-pin LQFP package designed for industrial and automotive applications. The device supports the extended -40C to +125C automotive temperature range as indicated by the -E suffix. A 16-bit MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals including timers, communication interfaces, and analog blocks. The PIC24E family specifically targets high-performance embedded applications, sitting in the hierarchy: PIC24E -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. It is widely adopted where 8-bit MCUs lack computational headroom but full 32-bit processors are overkill. Key features include dual 10/12-bit ADC blocks capable of up to 500 ksps each, USB On-The-Go (OTG), dual CAN 2.0B interfaces, nine 16-bit timers plus nine input capture and nine output compare/PWM channels, an 8-bit Parallel Master Port (PMP) for graphics displays, and a hardware Real-Time Clock and Calendar (RTCC). The CPU operates at up to 60 MHz internal oscillator with PLL scaling to the 70 MIPS throughput. Architecturally, the PIC24EP uses a modified Harvard RISC core with a 16-bit instruction word and 24-bit instruction path, giving it strong code density and a deterministic instruction cycle. Its dual CAN modules support CAN 2.0B active with acceptance filters, while the USB OTG controller provides full-speed (12 Mbps) device/host/OTG operation without an external transceiver PHY for device mode. Typical applications include automotive body and powertrain ECUs, industrial PLCs, motor control with field-oriented control (FOC) algorithms, medical patient monitors, and CAN-connected sensor hubs. The combination of dual CAN, USB, and 70 MIPS core is uncommon at this integration level and price. Designers should note that the -E/PL variant operates from 3.0V to 3.6V only (no internal 5V tolerance on I/O); a 3.3V LDO is required when sourced from a 5V rail. The 144-pin LQFP package requires a 4-layer PCB with continuous ground plane for SI/EMI compliance in CAN-bus applications. This page synthesizes distributor stock levels, drop-in alternatives from the same PIC24E family, and practical design notes that complement the 622-page Microchip datasheet rather than duplicating it.

Angebot Kontakt

PIC24EP512GU814-I/PL

PIC24EP512GU814-I/PL - 16-bit MCU 512KB Flash USB CAN | Microchip

The Microchip Technology PIC24EP512GU814-I/PL is a high-performance 16-bit PIC24E microcontroller delivering up to 70 MIPS through its enhanced PIC® RISC architecture, packaged in a 144-pin LQFP (PL) with 512 KB of Flash program memory and 52 KB of RAM. The -I suffix denotes the industrial -40°C to +85°C operating temperature range and the part operates from a single 3.3 V supply typical of PIC24E designs. A microcontroller (MCU) is an integrated circuit that combines a processor core, program memory (Flash), data memory (RAM), and a rich set of peripherals into a single chip. The PIC24E family sits in Microchip's 16-bit DSC (Digital Signal Controller) hierarchy: 8-bit PIC16/PIC18 -> 16-bit PIC24 -> 16-bit dsPIC33 -> 32-bit PIC32, offering a balance of deterministic performance, low power, and DSP-class signal processing in cost-sensitive embedded designs. Key features of the PIC24EP512GU814 include integrated Full-Speed USB 2.0 (host/device/OTG), two independent CAN 2.0B controllers, a 12-bit ADC with up to 1.1 Msps conversion rate, motor-control PWMs, and a Peripheral Pin Select (PPS) subsystem that allows digital peripheral I/O mapping to a wide range of physical pins. The 70 MIPS core gives it strong DSP-class performance for filtering and control loops. The 144-pin LQFP (20x20x1.4 mm) package exposes a large number of I/O and analog channels. Architecturally, the PIC24EP core uses a 24-bit instruction word with 16-bit data paths, single-cycle hardware MAC, hardware DO/DO# loops, zero-overhead looping, and tightly-coupled interrupt logic. This makes it well-suited for closed-loop motor control, power conversion, and high-throughput serial protocols running concurrently. Typical applications include industrial automation (PLC, sensor hubs, motor drives), automotive body and chassis ECUs (CAN-connected nodes), USB peripherals (data loggers, instrumentation, Human Interface Devices), medical instrumentation, and embedded graphical HMI panels. The USB + Dual-CAN combination is particularly attractive for gateway and bridge designs. When designing with this part, plan the PPS remapping table early so digital peripherals land on the desired pins without conflicts, and ensure the 3.3 V rail provides sufficient decoupling near each VDD/VSS pair. The 144-LQFP footprint requires careful escape routing and 0.4 mm pitch traces. This page synthesizes real-time distributor pricing, drop-in same-package alternatives, and practical design notes curated for engineers evaluating the PIC24EP512GU814 family for new designs or as a substitute on an existing 144-pin LQFP layout.

Angebot Kontakt

PIC24EP512GU814T-I/PH

PIC24EP512GU814T-I/PH - 512KB Flash, USB, Dual CAN 16-bit MCU

The Microchip Technology PIC24EP512GU814T-I/PH is a high-performance 16-bit microcontroller from the PIC24EP family, featuring a 70 MIPS CPU core, 512KB of Flash program memory, 52KB of RAM, and an integrated USB 2.0 full-speed interface with on-chip transceiver, plus two independent CAN modules. It is housed in a 144-pin TQFP (PH) package measuring 16x16 mm, designed for industrial-grade applications with an operating temperature range of -40C to +85C. A 16-bit microcontroller (MCU) is an embedded computing device that combines a CPU, memory, and peripherals on a single silicon die. Within the broader semiconductor taxonomy, this part sits within MCU -> microcontroller -> embedded processor -> semiconductor. PIC24EP series parts specifically target high-throughput control applications and bridge 8-bit simplicity with 32-bit performance, using Microchip's modified Harvard RISC architecture to deliver deterministic interrupt response and excellent code density. Key features include up to 70 MIPS performance at 3.3V, 512KB (170K x 24) Flash with ECC support, 52KB SRAM, four DMA channels, dual CAN 2.0B controllers, USB 2.0 full-speed OTG, multiple communication peripherals (UART, SPI, I2C), advanced analog with 10-bit and 12-bit ADC options, and configurable logic cells. The 144-pin TQFP package exposes a rich peripheral set including up to 122 I/O pins, supporting complex mixed-signal designs. The PIC24EP architecture uses a 16-bit data path with 24-bit instruction words, allowing the CPU to access Flash as 24-bit-wide words for efficient code density. Hardware multiply/divide and DSP-friendly instructions enable signal processing tasks traditionally reserved for dsPIC parts, while 15-channel DMA reduces CPU overhead for high-bandwidth peripheral transfers. Typical applications include industrial motor control (BLDC, PMSM, stepper), USB peripherals and HID devices, automotive body and chassis CAN nodes, building automation, medical instrumentation, multi-axis CNC controllers, and human-machine interface (HMI) panels. Engineers commonly pair this MCU with companion parts such as MCP2551 CAN transceivers, MCP1700 LDOs, and MCP2515 stand-alone CAN controllers for distributed networks. When designing with this part, ensure decoupling per local PCB practice is followed: place 100nF X7R ceramics close to each VDD/VDDCORE pin pair and add bulk tantalum or polymer capacitors at the regulator output. Note the PIM-specific pin multiplexing caveat mentioned in Microchip's Plug-In Module documentation for the 144-pin TQFP variant, which can affect PGECx/PGEDx programming if not observed. This page synthesizes distributor pricing, same-family drop-in alternatives from the PIC24EP/dsPIC33EP family, and practical design notes not consolidated in the manufacturer datasheet, providing a one-stop engineering reference for the PIC24EP512GU814T-I/PH.

Angebot Kontakt

PIC24EP512GU814T-I/PL

PIC24EP512GU814T-I/PL - 60 MIPS, 512KB Flash, USB/CAN MCU | Microchip

The Microchip Technology PIC24EP512GU814T-I/PL is a high-performance 16-bit microcontroller from the PIC24E general-purpose family, featuring a 60 MIPS core, 512 KB of Flash program memory, and 52 KB of RAM in a 144-pin LQFP (PL) package. The device integrates Full-Speed USB 2.0, two CAN 2.0 modules, 15 DMA channels, and 122 I/O pins for advanced connectivity. A 16-bit MCU (microcontroller unit) is an integrated circuit containing a CPU, memory, and peripherals on a single die. PIC24E devices use a modified Harvard architecture with a 16-bit data path and 24-bit instruction word, optimized for C-code density while delivering deterministic real-time performance. The PIC24EP subfamily combines a 60 MIPS execution pipeline with DSP-grade multiply and DSP-instructions suited for motor control and digital signal processing tasks. Key features include 512 KB Flash organized as 170K x 24, 52 KB SRAM, 4 KB configuration Flash, a 32-bit data path, and a peripheral set that includes 9 timers, a 32-channel ADC (12-bit/10-bit configurable), five 16-bit analog comparators, five UART/SPI/I2C-capable ECAN modules, two I2C, three SPI, and a CTMU for capacitive touch sensing. The 60 MHz VCO drives the system clock through programmable PLL blocks, supporting USB 48 MHz and peripheral timing requirements. Architecturally, the PIC24EP512GU814 employs a 16-bit RISC engine with single-cycle MAC and hardware DIV instructions. Bus-level DMA reduces CPU load during peripheral-to-memory transfers, and the dual CAN controllers support CAN 2.0B active frames at 1 Mbps. The 144-pin LQFP (20x20 mm) package exposes 122 GPIO lines, providing ample pin budget for parallel buses and multiple sensor interfaces. Typical applications include industrial automation controllers with CAN networking, USB-based data acquisition modules, motor control inverters using high-speed PWM, medical instrumentation requiring mixed analog/digital interfaces, and automotive body/comfort ECUs. The dual CAN + USB combination is particularly valuable for diagnostic bridges and field-serviceable equipment. When designing with this device, budget 3.0V to 3.6V supply voltage, use 10 uF + 0.1 uF VDD decoupling near each power pin pair, and ensure the VDD/VSS pin assignments of the 144-pin LQFP match the routing on your target board. The dual CAN and USB require careful impedance-controlled routing to maintain signal integrity at 1 Mbps CAN and 12 Mbps USB Full-Speed. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers evaluate the PIC24EP512GU814T-I/PL for new designs and identify pin-compatible family members for cost-down or qualification migrations.

Angebot Kontakt

PIC24EP512MC202-E/SO

PIC24EP512MC202-E/SO - 70MIPS 16-bit Motor Control MCU | Microchip

The Microchip PIC24EP512MC202-E/SO is a 16-bit Digital Signal Controller (DSC) from the PIC24E family, rated for 70 MIPS execution, with 512 KB Flash program memory and 48 KB SRAM, in a 28-pin SOIC (SO) wide-body package. It integrates a 60 MHz CPU core, Motor Control PWM (MCPWM), Quadrature Encoder Interface (QEI), multiple operational amplifiers and high-speed 10/12-bit ADCs for closed-loop motor and power-conversion control. A Digital Signal Controller is a hybrid class of microcontroller that combines an MCU's deterministic peripherals with a DSP's MAC engine; the PIC24E DSC family extends the PIC24 baseline architecture with single-cycle MAC, hardware fractional arithmetic, and DSP-oriented addressing modes for sensorless FOC, audio processing and digital filtering. This places the PIC24E in the hierarchy: microcontroller -> 16-bit MCU -> DSC -> motor control DSC -> power-conversion controller. Key differentiating features for this E/SO variant include the wide SOIC-28 footprint for hand-repairable through-hole-style prototyping, on-chip comparators for current sensing, up to four analog op-amps usable for signal conditioning, dedicated PWM channels with independent time bases for three-phase motor drive, and a 5V tolerant I/O ring that simplifies interfaces to industrial 24V gate drivers after external clamping. The part carries Microchip's "E" extended-temperature grade (-40C to +125C) suited to underhood and industrial enclosures. Architecturally, the PIC24EP512MC202-E/SO uses a modified Harvard bus with separate program and data paths, a hardware multiply/accumulate unit, and tightly-coupled peripherals that allow deterministic interrupt latency suitable for FOC loops at switching frequencies above 50 kHz. Its 512 KB Flash (170K x 24 organization) supports dual-partition live-update firmware, useful for in-field motor drive OTA upgrades. Typical applications include field-oriented control of PMSM and BLDC motors (drones, e-bikes, appliances), high-speed sensorless compressors, digital power conversion (totem-pole PFC, LLC resonant), industrial drives (servo amplifiers), automotive auxiliary pumps, and CNC spindle control. The integrated op-amps and comparators reduce external analog BOM by 6-10 components. When designing with this part, ensure the VDD/VSS pair is decoupled with one 100 nF per supply pin within 5 mm, place the crystal within 10 mm of OSC1/OSC2, and verify that the MCPWM dead-time unit is configured before enabling PWMs - missed configuration locks the FET bridge in shoot-through during fault recovery. This page synthesizes live distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Angebot Kontakt

PIC24EP512MC202-E/SP

PIC24EP512MC202-E/SP - 70 MIPS Motor Control MCU | Microchip

The Microchip PIC24EP512MC202-E/SP is a 16-bit microcontroller from the PIC24E family delivering 70 MIPS of computational throughput, 512 KB of Flash program memory, and 48 KB of RAM, in a 28-pin SPDIP package. Designed specifically for precision motor control, the device integrates dedicated motor-control peripherals including a Motor Control PWM (MCPWM) module, a Quadrature Encoder Interface (QEI), and on-chip operational amplifiers for current sensing and signal conditioning. A 16-bit microcontroller is a single-chip computer that processes data and instructions in 16-bit words, providing higher throughput and richer peripherals than 8-bit alternatives while consuming less power than 32-bit platforms. The PIC24EP architecture sits between 8-bit PIC MCUs and 32-bit ARM Cortex-M devices, offering DSP-like instruction support (single-cycle MAC) and deterministic interrupt handling favored in hard-real-time control loops such as field-oriented control (FOC) of three-phase BLDC and PMSM motors. Key features include 60 MHz core operation (70 MIPS with 4-cycle MAC), dual 36 ksps 10-bit ADC modules, configurable logic cell, and a flexible peripheral pin-select mapping. The integrated op-amps can be configured for current-shunt amplification in three-phase inverters, eliminating external analog front-end components. AEC-Q100 qualification makes this part suitable for automotive motor-control subsystems. The 28-SPDIP package supports through-hole PCB assembly for industrial-grade reliability and easy prototyping. Architecturally, the PIC24E core combines a Harvard bus, 24-bit instruction width, and a 16-bit DSP engine with hardware multiply-accumulate, providing efficient math for Park/Clarke transforms used in vector control. The integrated peripherals allow a complete FOC drive loop to be implemented in software with minimal external circuitry. Typical applications include brushless DC (BLDC) motor drives, permanent-magnet synchronous motor (PMSM) control, fan and pump controllers, e-bike and robotic actuators, servo drives, and automotive cooling-fan or water-pump controllers. The combination of high MIPS, motor-tailored peripherals, and AEC-Q100 qualification makes it ideal for high-volume, safety-conscious embedded motion systems. When designing with this MCU, allocate DMA channels carefully for ADC-to-PWM synchronization, and use the QEI timer in 32-bit mode for high-resolution rotor position. Compared to FOC implementations on 8-bit PIC16/PIC18 devices, the PIC24EP512MC202 typically achieves 5-10x higher loop rates, reducing torque ripple and audible noise. This page synthesizes verified distributor pricing, same-package drop-in alternatives within the PIC24EP family, and practical motor-drive design guidance that goes beyond the manufacturer datasheet's pin description tables.

Angebot Kontakt

PIC24EP512MC202-H/MM

PIC24EP512MC202-H/MM - 70 MIPS Motor Control MCU 512KB Flash | Microchip

The Microchip Technology PIC24EP512MC202-H/MM is a high-performance 16-bit PIC24E microcontroller engineered for precision motor control, delivering 70 MIPS of CPU throughput at 3.0-3.6 V supply. It integrates 512 KB Flash program memory and 48 KB RAM, with dedicated high-speed PWM, motor-control PWM (MCPWM), quadrature encoder interface (QEI), dual op-amps, and a 10-bit A/D converter rated at 1.1 Msps. The -H temperature grade indicates an extended automotive operating range of -40 °C to +150 °C, enabling deployment in harsh underhood and industrial environments. A 16-bit microcontroller (MCU) is a single-chip computer based on a 16-bit data path, sitting in the hierarchy between 8-bit MCUs (e.g., PIC16, PIC18) and 32-bit MCUs (e.g., PIC32, ARM Cortex-M). It belongs to the broader class of digital signal controllers (DSCs), which add hardware multiply-accumulate and DSP-oriented peripherals for real-time control. Motor-control DSCs such as the PIC24E combine closed-loop feedback peripherals with deterministic PWM generation, allowing engineers to implement field-oriented control (FOC) and sensorless commutation in a single device. Key differentiating features of the PIC24EP512MC202-H/MM include its 60 MIPS operating speed (70 MIPS in some variants), 4 ADC sample-and-hold channels for simultaneous current sensing, and integrated dual op-amps that remove external signal-conditioning stages. Its peripheral pin select (PPS) provides flexible I/O mapping, and the CTMU peripheral enables touch sensing and precise time measurement. Together these blocks reduce external BOM and PCB footprint. Architecturally, the PIC24EP512MC202-H/MM is built around a 16-bit modified-Harvard core with a 24-bit instruction word and hardware DSP engine, paired with high-resolution 14-bit PWM and 1.1 Msps 10-bit ADC. The integrated op-amps feed directly into the ADC, supporting single-shunt and dual-shunt current sensing topologies used in vector-drive BLDC and PMSM applications. Typical applications include sensorless and sensored BLDC/PMSM motor drives, fan and pump controllers, automotive HVAC blowers, e-bike traction inverters, and small industrial servo drives. The QEI peripheral accepts A/B/index signals from optical or magnetic encoders, while the MCPWM block generates complementary PWM with programmable dead time and fault inputs. Design consideration: ensure VDD decoupling follows Microchip's recommended 10 µF bulk + 0.1 µF per-pin pattern, and route the analog op-amp output traces as short guarded pairs to the ADC inputs. The -H grade device is qualified to AEC-Q100 automotive stress profiles, but the user must still validate solder-process compatibility with the 6×6 mm QFN-MM footprint.

Angebot Kontakt

PIC24EP512MC202-H/SP

PIC24EP512MC202-H/SP - 70 MIPS 16-bit Motor Control MCU, 512KB Flash | Microchip

The Microchip PIC24EP512MC202-H/SP is a 70 MIPS, 16-bit PIC24E-family microcontroller (MCU) and digital signal controller (DSC) housed in a 28-pin SPDIP package, optimized for high-performance precision motor control applications. The device integrates 512 KB of Flash program memory (170K x 24 words), up to 48 KB of RAM, and a rich set of motor-control-oriented peripherals including high-speed PWM modules, on-chip operational amplifiers, 12-bit ADCs, and a dedicated quadrature encoder interface. A 16-bit microcontroller is a class of embedded processor that exposes a 16-bit data path and instruction word, sitting between 8-bit MCUs (PIC16/PIC18) and 32-bit MCUs (PIC32). Within that hierarchy, the PIC24E belongs to the dsPIC33/PIC24E digital signal controller family that combines traditional MCU peripherals with DSP capabilities such as MAC instructions and zero-overhead looping. Motor-control variants in this family - including the PIC24EPxxxMCxxx series - add up to 14 high-speed PWM channels, dual 12-bit ADCs with simultaneous sampling, op-amp outputs routed to ADC inputs, and a QEI module for closed-loop rotor position feedback. Key features of the PIC24EP512MC202 include 512 KB Flash, 48 KB RAM, seven 16-bit timers, two UART, two SPI, two I2C, a 12-bit ADC with up to 10 channels and 500 ksps conversion rate, six PWM outputs with duty-cycle resolution and fault inputs, and dual on-chip op-amps that can be used for current sensing in FOC motor drives. The -H temperature grade extends the operating range to 150 °C, and the /SP package is the 28-pin SPDIP (Skinny Plastic DIP, 0.300 inch row spacing). The -H/SP part is particularly suited to industrial environments where solder-joint reliability on through-hole boards is preferred over SMD. Architecturally, the PIC24EP512MC202 uses a modified Harvard bus with a 24-bit instruction word, an 8-deep software stack, and a 16 x 16 hardware MAC for DSP workloads. The PWM module supports center-aligned and edge-aligned modes with dead-time control and complementary outputs - essential for three-phase inverter drive. The op-amps can be internally routed to ADC channels, eliminating the need for external signal conditioning in current-sense chains and reducing BOM cost. Typical applications include BLDC and PMSM motor control (drones, e-bikes, HVAC fans), field-oriented control (FOC) inverter drives, industrial servo control, sensorless motor commutation using BEMF, switched reluctance motor drives, and automotive pump/fan controllers. With the -H temperature grade and AEC-Q100 qualification, this part also serves automotive underhood and body-electronics applications. Design considerations: provide low-ESR decoupling (100 nF + 10 µF bulk) on every VDD/AVDD pin pair, route the crystal traces short and guarded, and use the internal op-amps with care because their bandwidth and offset drift may not be sufficient for high-accuracy current sensing above 50 kHz - consider an external current-sense amplifier for high-performance FOC. Confirm that the ICSP/PGD/PGC programming pins remain accessible for in-circuit firmware updates. This page combines drop-in pin-compatible alternatives, parametric comparisons, and practical design notes drawn from Microchip's PIC24E motor-control datasheet and reference designs, providing information gain not available in the bare datasheet.

Angebot Kontakt

PIC24EP512MC202T-E/MM

PIC24EP512MC202T-E/MM - 60 MIPS 16-bit Motor Control MCU | Microchip

The Microchip Technology PIC24EP512MC202T-E/MM is a 16-bit microcontroller from the PIC24EP Motor Control family, delivering up to 60 MIPS of CPU performance and integrating 512 KB (170K x 24) of Flash program memory in a 28-pin QFN-S (6x6 mm) package. It carries the -E extended-temperature grade and AEC-Q100 automotive qualification, making it suitable for harsh-environment designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals on one die. In the broader embedded hierarchy, an MCU sits below microprocessors in capability but above fixed-function logic ICs in programmability, and within Microchip's portfolio the PIC24EP family targets high-performance, deterministic real-time control applications such as motor drive and digital power conversion. Key features of this device include 24 KB of RAM, a 60 MIPS PIC24E core with single-cycle MAC, an integrated DMA controller, dedicated Motor Control PWM modules, multiple communication interfaces (UART, SPI, I2C), and a 10/12-bit ADC. The 512 KB Flash supports In-Circuit and In-Application Programming, and the JTAG boundary-scan interface enables trace and run-time watch for debugging. The architecture uses a modified Harvard layout with separate Flash and RAM buses, allowing simultaneous instruction fetch and data access. This dual-bus structure, combined with the DSP engine (single-cycle MAC with zero-pitch loop), gives deterministic interrupt latency and high code-density - both critical for closed-loop motor control loops running at tens of kilohertz. Typical applications include BLDC and PMSM motor controllers, automotive body and powertrain ECUs, industrial variable-frequency drives (VFDs), solar micro-inverters, and digital power supply controllers. The AEC-Q100 qualification extends its reach into under-hood automotive subsystems and Industrial IoT edge nodes requiring long-term reliability. When designing with this part, ensure the supply voltage is held within 3.0-3.6 V and that the exposed pad (EP) is soldered to a sufficiently large copper pour for thermal dissipation. The Motor Control PWM, ADC, and DMA peripherals should be prioritized over CPU loops to achieve the deterministic throughput demanded by field-oriented control (FOC) algorithms. This page synthesizes distributor pricing, parametric equivalents, and practical design notes not found in the manufacturer datasheet alone, helping procurement and design engineers make informed drop-in replacement decisions.

Angebot Kontakt

PIC24EP512MC202T-E/SO

PIC24EP512MC202T-E/SO - 60 MIPS 16-Bit MCU, 512KB Flash | Microchip

The Microchip Technology PIC24EP512MC202T-E/SO is a high-performance 16-bit PIC microcontroller from the PIC24EP Motor Control family, delivering up to 60 MIPS through a pipelined PIC MCU core, packaged in a 28-pin SOIC (SO) wide-body outline. The device integrates 512 KB of Flash program memory (organized as 170K x 24 words), 24 KB of SRAM, and AEC-Q100 qualification targeting automotive and industrial motor-control applications. A 16-bit microcontroller (MCU) is a single-chip computer that executes instructions on 16-bit-wide data paths, balancing higher arithmetic precision than 8-bit parts against lower cost and power than 32-bit Cortex-M devices. Within Microchip's product tree, the PIC24EP sits between the PIC24F (general-purpose) and dsPIC33E (DSP-extended) families, and is purpose-built for closed-loop motor control with integrated high-speed PWM, quadrature encoder interfaces, on-chip op-amps and comparators. So a 24EP part is best understood as a motor-control-oriented MCU rather than a general-purpose microcontroller. Key features include 60 MIPS core throughput from a 60 MHz oscillator, dual 10-bit or 12-bit ADC modules with up to 1.1 Msps conversion, dedicated Motor Control PWM (MCPWM) with up to 1.04 ns PWM resolution, two on-chip op-amps, three analog comparators, CTMU charge-time measurement unit, and configurable peripheral pin select. The wide operating voltage range (typically 3.0-3.6 V) supports direct connection to 3.3 V system rails without additional level shifting. Typical applications include three-phase BLDC and PMSM motor drives, AC induction motor inverters, sensorless field-oriented control (FOC) systems, and industrial automation servo loops where deterministic interrupt latency, integrated analog front-end, and high-resolution PWM are required. The 'T' suffix denotes Tape-and-Reel packaging, 'E' indicates the Extended (industrial/automotive) temperature grade, and 'SO' designates the 28-pin SOIC package. When designing with this part, use Microchip's MPLAB X IDE with the XC16 compiler and configure the Configuration bits carefully; Fosc and PLL settings directly determine the achievable MIPS and the PWM/ADC sampling cadence, so the system clock tree should be planned before writing control-loop code. This page consolidates distributor pricing tiers, drop-in alternatives within the same 28-SOIC footprint, and practical motor-control design notes that complement the manufacturer datasheet.

Angebot Kontakt

PIC24EP512MC202T-I/SO

PIC24EP512MC202T-I/SO - 16-bit 70MIPS 512KB Flash MCU | Microchip

The Microchip Technology PIC24EP512MC202T-I/SO is a 16-bit PIC® 24EP series microcontroller (MCU) delivering up to 70 MIPS of CPU performance with 512 KB of Flash program memory and 48 KB of RAM, housed in a 28-pin SOIC (SO) package on tape-and-reel (T suffix). It is a motor-control-focused MCU featuring dedicated motor-control peripherals including a high-speed PWM module (MCPWM), quadrature encoder interface (QEI), on-chip operational amplifiers for current shunt amplification, and high-speed ADCs for precision closed-loop control. What is a PIC24EP microcontroller? The PIC24EP family is Microchip's high-performance 16-bit DSC (Digital Signal Controller) architecture positioned between 8-bit PIC16/PIC18 MCUs and 32-bit PIC32 devices. Within the broader taxonomy, a DSC combines a microcontroller with hardware DSP capability, optimized for real-time control loops in motor drives, power conversion, and audio processing. The 'EP' suffix denotes the enhanced peripheral set, and the 'MC' family specifically targets motor control with hardware PWM, QEI, and on-chip op-amps that eliminate the need for external analog front-ends. Key features of this device include 512 KB (170K x 24) Flash, 48 KB RAM, 70 MIPS at 3.3V operation, 2 op-amps integrated, multiple UART/SPI/I2C interfaces, 12-bit ADC at 500 ksps, and an industrial operating temperature range of -40C to +85C. The SOIC-28 wide-body footprint provides thermal and routing headroom for higher-power motor-drive boards compared to QFN packages, making it well-suited for industrial motor-control PCBs. Typical applications include BLDC/PMSM motor drives, field-oriented control (FOC) of permanent magnet motors, sensorless motor control using back-EMF zero-crossing, industrial servo drives, and consumer appliance motor control such as washing machines and HVAC blowers. The integrated op-amps directly interface with low-side current shunts, removing two external amplifiers from the BOM and shrinking PCB area. When designing with this MCU, allocate a 3.3V LDO rail with bulk decoupling near the VDDCORE pin, route the analog AGND/AVSS separately from digital GND, and place the QEI traces as a matched-length differential pair. The MCPWM outputs should feed gate drivers via short traces to minimize dead-time skew, and unused op-amp inputs must be tied to mid-rail to prevent oscillation. This page synthesizes distributor pricing, tape-and-reel drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers select the right variant for cost-sensitive BLDC applications versus AEC-Q100 automotive projects.

Angebot Kontakt

PIC24EP512MC204-H/ML

PIC24EP512MC204-H/ML - 60 MIPS 512KB Flash MCU | Microchip

The Microchip Technology PIC24EP512MC204-H/ML is a 16-bit PIC24E family microcontroller engineered for high-performance precision motor control, delivering 60 MIPS (Million Instructions Per Second) of computational throughput, 512 KB of on-chip Flash program memory (170K x 24 words) and a 44-pin QFN (8x8 mm) package designed for space-constrained industrial designs. The part is rated for the extended -40C to +150C automotive/industrial temperature range denoted by the -H operating range suffix. What is a PIC24E MCU? A 16-bit microcontroller (MCU) is a programmable processor that integrates CPU, memory, timers, ADCs, communication peripherals and interrupt logic on a single silicon die, occupying the middle ground between 8-bit MCUs and 32-bit Cortex-M cores. Within Microchip's taxonomy, PIC24E belongs to dsPIC33/PIC24 high-performance 16-bit family, which itself falls under the broader category of microcontrollers, embedded processors, and semiconductors. The 'EP' suffix denotes enhanced peripherals and 70 MIPS capable core, while the 'MC' sub-family adds motor-control-specific PWM, quadrature encoder and high-speed ADC channels optimized for field-oriented control (FOC) of PMSM and BLDC motors. Key features of this variant include the high-speed 70 MIPS (60 MIPS sustained) dsPIC30-style CPU with modified Harvard architecture and DSP engine, 16-channel 10-bit ADC with up to 500 ksps conversion rate, dedicated motor-control PWM modules with complementary outputs and dead-band control, four general-purpose 16-bit timers, dual analog comparators, Peripheral Trigger Generator (PTG) for offloading CPU timing, and Configurable Logic Cells (CLC) for custom glue logic. Communication peripherals include three UART, two SPI, and one I2C interface. The integrated Charge Time Measurement Unit (CTMU) enables capacitive touch and precise time-of-flight measurements for advanced sensing. Architecture-wise, the PIC24EP512MC204-H/ML uses a wide 24-bit instruction word with 16-bit data paths, dual port SRAM for simultaneous DMA-style accesses, and a 32-bit barrel shifter for high-throughput DSP math - useful for field-oriented control loops executing in single cycle. The enhanced on-chip peripherals allow the CPU to offload motor-control sequencing, freeing the core for application-layer tasks and reducing latency on feedback paths. Typical applications include sensorless and sensored BLDC motor controllers for industrial fans, pumps, and drones, automotive HVAC and electric power steering (EPS) sensor interfaces, field-oriented control of PMSM servo drives, switched-mode power supplies with digital control loops, and high-density IoT edge nodes requiring DSP-like math on a 16-bit footprint. When designing with the PIC24EP512MC204-H/ML, allocate at least four PCB layers to provide adequate ground planes for the QFN thermal pad, route the analog AVSS/AVDD pair separately from the digital supply, and follow Microchip's motor-control reference design guidance for PWM trace symmetry. Use the Peripheral Trigger Generator (PTG) for deterministic ADC-to-PWM timing to minimize torque ripple in high-speed motor control loops. This page synthesizes distributor pricing snapshots, drop-in same-package alternatives from Microchip's PIC24EP family, and practical design notes not consolidated in the manufacturer datasheet - giving procurement and firmware engineers a one-stop reference for design-in and BOM risk evaluation.

Angebot Kontakt

PIC24EP512MC204-H/PT

PIC24EP512MC204-H/PT - 16-bit 70 MIPS MCU 512KB Flash | Microchip

The Microchip PIC24EP512MC204-H/PT is a 16-bit dsPIC/PIC24E microcontroller designed for high-performance motor control and precision digital signal processing applications, delivering up to 70 MIPS in a 44-pin TQFP (10x10 mm) package. The -H suffix denotes the High-temperature grade, while /PT is the TQFP package designator. The device integrates 512 KB Flash, 48 KB SRAM, 4 KB EEPROM, and on-chip peripherals including dual operational amplifiers, high-speed comparators, PWMs, and a Quadrature Encoder Interface (QEI), enabling single-chip motor drive designs. A 16-bit microcontroller is a single-chip computer whose CPU datapath, registers, and ALU are 16 bits wide, balancing code density, deterministic interrupt latency, and arithmetic throughput that 8-bit MCUs cannot deliver for motor math or signal processing. The PIC24EP512MC204 sits in the PIC24E family, which extends the classic PIC16-bit architecture with hardware DSP extensions, DMA, and a 70 MIPS core running from a 140 MHz system clock with instruction-issue every two clock cycles, giving designers a deterministic alternative to Cortex-M parts for hard-real-time control loops. Key features include 35 I/O pins, a 10/12-bit ADC, three 16-bit timers, up to four PWM channels with complementary outputs and dead-band control, two op-amps, two high-speed analog comparators, and QEI for BLDC/PMSM rotor position feedback. The /PT package is 10x10 mm TQFP-44 with 0.8 mm pitch, suitable for hand-soldering or standard reflow profiles on 2-layer FR-4. The -H temperature grade extends operation from -40 °C to +150 °C, allowing under-hood automotive and harsh industrial deployments. RoHS compliance and lead-free reflow are factory-attested. The architecture uses a 5-stage pipeline Harvard bus with separate program and data paths, allowing concurrent Flash fetch and SRAM read. The 24-bit instruction word supports MAC operations and hardware loop buffers, which combined with the 70 MIPS throughput deliver roughly 25-30 MIPS sustained DSP performance. DMA minimizes CPU load for ADC and PWM transfers, freeing core cycles for the field-oriented control loop. The integrated op-amps typically bias current-sense amplifiers and the comparators trigger fault shutoff within 30 ns, critical for short-circuit protection. Typical applications include field-oriented control of PMSM/BLDC motors, industrial servo drives, encoderless fan and pump controllers, household appliances (washing machines, dishwashers, refrigerator compressors), automotive HVAC blower control, and general-purpose 16-bit embedded control with DSP. The combination of integrated analog and QEI lets engineers replace multi-chip discrete motor-control boards with a single MCU. When designing with the PIC24EP512MC204-H/PT, observe the 3.0-3.6 V VDD core supply rail and provide 1 uF + 100 nF decoupling adjacent to every supply pin. Keep the high-speed analog comparator traces short and shielded by a ground ring to avoid PWM-induced noise coupling, and use the integrated op-amp in unity-gain or low-gain configuration to avoid saturating downstream ADCs. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt

PIC24EP512MC204-H/TL

PIC24EP512MC204-H/TL - 70 MIPS 512KB Flash Motor MCU | Microchip

The Microchip PIC24EP512MC204-H/TL is a 16-bit 70 MIPS motor-control microcontroller with 512 KB Flash and 48 KB RAM, supplied in a 44-pin VTLA package with an exposed thermal pad and qualified to the AEC-Q100 automotive standard. The device runs from a 3.0 V to 3.6 V supply, integrates three on-chip op amps, four analog comparators, and a high-resolution 6-channel PWM module plus a Quadrature Encoder Interface (QEI), delivering deterministic torque and speed control for brushless DC, permanent-magnet synchronous, AC-induction, and switched-reluctance drives. A 16-bit microcontroller (MCU) is a programmable embedded processor whose ALU, registers and bus are 16 bits wide; it occupies the middle tier of the MCU hierarchy - above 8-bit devices (PIC16, PIC18, 8051) and below 32-bit Cortex-M/A cores. Within Microchip's portfolio, the PIC24E family is the "enhanced" 16-bit tier, and the MC variant adds motor-control peripherals (PWM, QEI, op amps, CTMU). Motor-control is a focused subset of motion-control that closes a current or torque loop with deterministic PWM timing. Key features include a 70 MIPS core (up to 70 MHz operation), a 10-bit 1.1 Msps ADC or 12-bit 500 ksps ADC, USB 2.0 full-speed OTG with dedicated transceiver, two CAN 2.0B modules, four UART, three SPI, two I2C, and a CTMU for capacitive touch and time-of-flight measurement. The 70 MIPS performance with single-cycle multiply and hardware divide accelerates Park/Clark transforms and field-oriented-control loops, while the dedicated PWM module provides edge-aligned and center-aligned modes with hardware dead-time insertion. Typical applications include field-oriented motor drives (BLDC, PMSM, ACIM, SR), automotive body and chassis ECUs qualified to AEC-Q100, industrial servo amplifiers, and home-appliance variable-frequency drives. The wide operating temperature range (up to +150 C for the H suffix) makes it appropriate for under-hood automotive and harsh industrial environments. When designing with the -H/TL variant, verify thermal management of the VTLA exposed pad, allocate the VDD/VSS pin pairs evenly across the package to lower ground bounce, and keep the analog and digital supplies star-routed from a common ferrite to maximize ADC SNR. The H temperature grade and /TL package suffix are inseparable from the part number - choose /PT or /ML suffixes for different pinouts.

Angebot Kontakt

PIC24EP512MC204-I/ML

PIC24EP512MC204-I/ML - 70 MIPS 16-Bit Motor Control MCU | Microchip

The Microchip Technology PIC24EP512MC204-I/ML is a high-performance 16-bit microcontroller from the PIC24E Motor Control family, delivering up to 70 MIPS at 70 MHz CPU clock, integrating 512 KB Flash and 48 KB RAM, and housed in a 44-pin QFN (8x8 mm) package with industrial -40C to +85C temperature rating. Headline parameters include 16-bit dsPIC-style DSP engine, 512 KB Flash program memory, 48 KB SRAM data memory, and a maximum 70 MIPS throughput making it suitable for closed-loop motor control. A 16-bit MCU (microcontroller unit) is a single-chip processor with on-chip Flash, RAM and peripherals aimed at embedded control. It sits in the hierarchy microcontroller > embedded processor > integrated circuit > semiconductor. The PIC24E sub-family adds a DSP engine and motor-control-optimized peripherals such as high-speed PWM, quadrature encoder interface, op amps and comparators, placing it between general-purpose MCUs and dedicated DSPs in capability. Key features include dedicated high-speed PWM with up to 7.36 ns resolution, a 10/12-bit ADC with up to 2 MSPS sampling, on-chip operational amplifiers and comparators tailored for current sensing in motor drives, and a Quadrature Encoder Interface (QEI) for position feedback. The PIC24EP family supports both 3.0-3.6V single-supply operation and offers extensive communication peripherals including UART, SPI, I2C and CAN for industrial networking. Architecturally, the PIC24E core uses a modified Harvard architecture with 16-bit instructions and 24-bit address space, enabling 70 MIPS sustained throughput. The DSP engine adds single-cycle MAC instructions for sensorless control algorithms such as field-oriented control (FOC) and sliding-mode observers. The integrated op-amps and comparators eliminate external analog front-end components, reducing BOM and PCB area. Typical applications include sensorless and sensored BLDC motor control (PMSM, BLDC, ACIM), industrial servo drives, robotics field-encoder feedback processing, factory automation, and digital power conversion. Designers commonly pair it with Microchip's MPLAB X IDE and dsPIC33/PIC24 compiler toolchain for firmware development. When designing with this device, allocate adequate PCB area for the exposed pad (EP) thermal dissipation and connect it to a ground plane for optimal electrical and thermal performance. The 44-QFN (8x8 mm) footprint requires careful via-in-pad or thermal-via design. This page synthesizes distributor pricing, drop-in package alternatives, and practical design notes not found in the manufacturer datasheet alone, providing actionable procurement and design intelligence for engineers.

Angebot Kontakt

PIC24EP512MC204-I/TL

PIC24EP512MC204-I/TL - 16-bit 70MIPS 512KB Flash MCU | Microchip

The Microchip PIC24EP512MC204-I/TL is a 16-bit microcontroller from the PIC24EP motor-control family, featuring a 70 MIPS dsPIC/PIC24 enhanced core, 512 KB Flash, 48 KB RAM, and a 44-pin VTLA package with exposed pad. It integrates motor-control peripherals including three operational amplifiers, three comparators, a Peripheral Trigger Generator (PTG), a Quadrature Encoder Interface (QEI), and enhanced PWM (Motor Control PWM, MCPWM) suitable for advanced field-oriented control of 3-phase brushless DC, PMSM, and AC induction motors. The PIC24EP MC family is a series of 16-bit microcontrollers optimized for high-performance digital motor control and general-purpose embedded applications. Architecturally, these devices extend Microchip's dsPIC heritage with a modified Harvard bus, single-cycle 16x16 multiply, and deterministic interrupt latency, while integrating application-tuned analog such as on-chip op-amps and high-speed ADCs (10/12-bit, up to ~1.1 Msps). The 'MC' (Motor Control) sub-family specifically adds QEI, MCPWM, and PTG peripherals that offload critical timing from the CPU. Key features of the PIC24EP512MC204-I/TL include 70 MIPS performance at 3.3 V core supply, 512 KB self-programmable Flash with ECC, 48 KB SRAM, USB 2.0 Full-Speed OTG, CAN 2.0B, four UART, three SPI, two I2C, a 10-bit ADC up to 1.1 Msps with up to 32 input channels, three on-chip op-amps (configurable for current sensing in motor drives), three high-speed comparators for fault/protection, a Quadrature Encoder Interface (QEI), and a Peripheral Trigger Generator (PTG) for hardware-state-machine peripheral orchestration. The industrial -40C to +85C operating range supports harsh-environment deployment. Typical applications include field-oriented control (FOC) of 3-phase PMSM/BLDC motors, sensorless and sensored motor drives (e.g., drone ESCs, e-bikes, appliance pumps, fans, robotics), industrial servo control, factory-automation inverters, automotive auxiliary pumps and fans, and high-performance general-purpose embedded systems requiring USB and CAN connectivity. The combination of CPU throughput, on-chip op-amps for current shunt conditioning, and PTG-driven peripheral timing makes the part particularly attractive for cost-sensitive FOC drives. When designing with this part, ensure the exposed pad of the 44-VTLA package is properly soldered to a sufficient copper pour for thermal dissipation, since motor-control firmware typically runs the device near its MIPS ceiling. The Motor Control PWM (MCPWM) outputs should be routed with short, matched traces to the gate-driver inputs; do not place series resistors in the PWM path as they degrade switching edges. The on-chip op-amps must have their negative input pins correctly tied to shunt resistors with Kelvin-sense routing. This page synthesizes distributor stock and pricing, drop-in pin-compatible alternatives (same 44-VTLA footprint) drawn from Microchip's own PIC24EP/MC family, and practical design notes for FOC firmware teams that are not collected in the manufacturer datasheet.

Angebot Kontakt

PIC24EP512MC204T-E/TL

PIC24EP512MC204T-E/TL - 16-Bit 60 MIPS 512KB Flash MCU | Microchip

The Microchip Technology PIC24EP512MC204T-E/TL is a 16-bit PIC24EP microcontroller family, and is a tape-and-reel packaged variant, designed for high-performance precision motor control and DSP-intensive embedded applications. The 60 MIPS dsPIC/PIC24E core delivers 512 KB of Flash program memory and 48 KB of RAM, all housed in a 44-pin VTLA (6x6 mm) surface-mount package with an exposed thermal pad. It operates from a single 3.3 V supply and is AEC-Q100 qualified for automotive environments. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O onto one die. The PIC24E core extends the 16-bit PIC24 architecture with a wider 24-bit instruction word and a modified Harvard bus, doubling the maximum sustained throughput versus PIC24F parts. PIC24EP MCUs add a motor-control peripheral set (PWM, QEI, op amps, comparators, and CTMU), positioning this sub-family between general-purpose PIC24F devices and full dsPIC33 DSC parts. Key features include 60 MIPS core throughput (70 MIPS for the device family), three on-chip op amps, four high-speed comparators with 4 ns response, a Charge Time Measurement Unit (CTMU) for capacitive touch and time-of-flight measurements, plus dedicated motor-control PWM and Quadrature Encoder Interface (QEI) blocks. The peripheral set also includes SPI, I2C, UART, and LIN/UART for serial connectivity, and the 512 KB Flash supports self-programming and live update. The 16-bit modified Harvard architecture provides deterministic interrupt latency and a unified 24-bit instruction set optimized for DSP-style math, while the integrated op-amp and comparator front-ends remove the need for external analog signal conditioning in FOC motor loops. Compared with PIC24F, the PIC24EP doubles sustained MIPS and adds the high-speed analog peripherals demanded by sensorless and sensored BLDC, PMSM, and stepper control. Typical applications include automotive motor control (HVAC blowers, fuel pumps, seat and mirror actuators), industrial sensorless PMSM drives, small appliance BLDC fans and pumps, digital power conversion, and capacitive-touch user interfaces. When designing with this part, pair the 3.3 V supply with a 10 uF + 0.1 uF decoupling network near VDD and use the exposed pad as the primary thermal and ground return path. This page consolidates distributor pricing, verified drop-in alternatives from the same PIC24EP family, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt

PIC24EP512MC204T-I/ML

PIC24EP512MC204T-I/ML - 16-Bit 70MIPS 512KB Flash MCU | Microchip

The Microchip Technology PIC24EP512MC204T-I/ML is a 16-bit RISC microcontroller from the PIC24EP family, delivering up to 70 MIPS performance at 60 MHz, with 512 KB Flash program memory and 48 KB on-chip SRAM, housed in a 44-pin QFN (8x8 mm) package. It is engineered for high-performance, precision motor control applications such as BLDC, PMSM, and AC induction drives where deterministic real-time response and DSP-class signal processing are required. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile and non-volatile memory, and programmable peripherals. The PIC24EP family adds a 16-bit modified Harvard architecture with a DSP engine, positioning it above 8-bit MCUs but below 32-bit Cortex-M parts on raw compute density. It belongs to the broader hierarchy: microcontroller -> embedded processor -> semiconductor IC. The 16-bit core combined with a single-cycle MAC unit makes this device well suited to Field-Oriented Control (FOC) loops, Power Factor Correction (PFC), and digital filter execution in real time. Key features of the PIC24EP512MC204T-I/ML include on-chip motor-control peripherals such as a Quadrature Encoder Interface (QEI), Motor Control PWM (MCPWM) with up to 6 outputs and 2.5 ns PWM resolution, a Peripheral Trigger Generator (PTG), on-chip operational amplifiers and comparators for current sensing, plus a 12-bit ADC with up to 1.1 Msps conversion rate. These integrated analog resources eliminate the need for external op-amps and ADC front-ends in compact motor-control PCBs. Typical applications include BLDC/PMSM motor drives (appliances, HVAC fans, e-bikes, drones), industrial variable-frequency drives, servo and stepper control, digital power conversion (PFC, LLC, phase-shifted full-bridge), and general-purpose real-time embedded control. The 44-QFN (8x8) footprint balances I/O density with a small PCB area, suitable for space-constrained drives operating at industrial temperature ranges (-40C to +85C, I-grade). A key design consideration when using this device is thermal and supply decoupling: place 100 nF ceramic bypass capacitors adjacent to every VDD/VSS pair, plus a 4.7-10 uF bulk capacitor at the regulator output, and follow Microchip's recommended QFN land pattern with a continuous thermal pad for optimal heat spreading under sustained 70 MIPS operation. This page synthesizes distributor pricing, drop-in alternatives drawn from Microchip's PIC24EP family, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt

PIC24EP512MC204T-I/MV

PIC24EP512MC204T-I/MV - 70 MIPS 16-bit Motor Control MCU | Microchip

The Microchip Technology PIC24EP512MC204T-I/MV is a 70 MIPS 16-bit PIC24E microcontroller with 512 KB flash and 24 K × 16 RAM, housed in a 48-pin UQFN (6 × 6 mm) package. It features high-speed PWM, on-chip op amps, and advanced 12-bit analog peripherals optimized for precision motor control, delivering 16-bit MCU performance with integrated DSP capability for energy-efficient, quieter drives. A PIC24E microcontroller is a 16-bit dsPIC/DSC-class MCU from Microchip that combines a Harvard-architecture CPU running up to 70 MIPS with DSP extensions, on-chip motor-control peripherals, and high-resolution PWM. Within the broader taxonomy it sits between PIC24F (general purpose) and dsPIC33 (DSP-heavy), and is positioned as a motor-control and power-conversion MCU in Microchip's 16-bit lineup. The PIC24EP512MC204 specifically is the 512 KB flash / 24 KB RAM member of the MC204 family. Key features include 512 KB (170 K × 24) flash, 24 K × 16 RAM, 35 I/O pins, 9-channel 10/12-bit ADC, motor-control PWMs with dedicated time bases, integrated op amps for current sensing, and a 3.0 V to 3.6 V single supply. The 48-pin UQFN package is RoHS-compliant and supports industrial -40 °C to +85 °C operation. The MC204 family is one of Microchip's premier motor-control platforms and supports sensorless FOC, sinusoidal BLDC, and PFC algorithms via Microchip's MPLAB Harmony and motor-control libraries. Typical applications include 3-phase BLDC and PMSM motor drives for appliances, drones (ESC), HVAC blowers, industrial servo, and e-bike controllers. The PIC24EP512MC204 is also used in digital power-conversion stages such as totem-pole PFC, LLC resonant converters, and solar micro-inverters, where the high-resolution PWM and fast ADC enable tight control loops. Designers should evaluate the available timer/PWM channels against their switch frequency and dead-time requirements, and follow Microchip's motor-control development board layout for the high-current traces and shunt-amplifier routing. The integrated op amps allow direct shunt-resistor feedback without external amplifiers, saving BOM cost. This page synthesizes distributor pricing, drop-in same-package alternatives (PIC24EP512MC204-I/MV, PIC24EP512GP204T-I/MV), and application guidance not consolidated in the manufacturer datasheet.

Angebot Kontakt

PIC24EP512MC204T-I/PT

PIC24EP512MC204T-I/PT - 16-bit 70MIPS 512KB Flash MCU | Microchip

The Microchip Technology PIC24EP512MC204T-I/PT is a 16-bit, 70 MIPS dsPIC/PIC24E-family microcontroller with 512 KB of Flash program memory (170K x 24) and 48 KB of RAM, housed in a 44-pin TQFP (PT) 10x10 mm package. It is part of the PIC24EP "Motor Control" sub-family, featuring dedicated on-chip peripherals such as operational amplifiers, comparators, a Peripheral Trigger Generator (PTG), and a Quadrature Encoder Interface (QEI) tailored to high-performance motor-control and digital-power designs. A 16-bit microcontroller (MCU) is a programmable processor that fetches, decodes, and executes instructions whose internal data path is 16 bits wide, offering higher precision and code density than 8-bit parts while remaining easier to use than 32-bit Cortex-M devices. In the broader taxonomy, the PIC24EP sits inside Microchip's dsPIC/PIC24 family of 16-bit microcontrollers, which itself belongs to the wider category of embedded microcontrollers and ultimately to integrated circuits and semiconductors. The PIC24E architecture is built on a modified Harvard core with a 24-bit instruction word, designed to balance deterministic interrupt response with rich DSP-style arithmetic. Key features include 70 MIPS CPU performance from a 70 MHz peripheral clock, 512 KB self-programmable Flash with live update capability, 48 KB SRAM, 4 KB EEPROM emulation, and a 12-bit 1.1 Msps ADC with up to 9 channels and 4 Sample-and-Hold circuits. The device integrates two on-chip op-amps, three analog comparators with a programmable reference, a USB 2.0 full-speed On-The-Go controller, and motor-control PWMs with edge-aligned and center-aligned modes for field-oriented control. Operating voltage is 3.0 V to 3.6 V over an industrial -40 C to +85 C temperature range, with AEC-Q100 variants available in the same silicon for automotive designs. Architecturally, the part combines a high-throughput 16-bit core with motor-control-oriented peripherals and a flexible Peripheral Trigger Generator that allows deterministic, hardware-routed timing between ADC, PWM, and comparator modules without CPU intervention. This makes the PIC24EP512MC204T-I/PT well suited to FOC sensorless motor drives, switched-mode power supplies, and any closed-loop system where deterministic timing and tight ADC-PWM synchronization are required. Typical applications include BLDC/PMSM and ACIM motor-control inverters, uninterruptible power supplies (UPS), digital PFC and LLC power converters, factory automation drives, and precision industrial-servo positioning systems. The PTG and QEI also suit robotics, CNC spindle drives, and encoder-fed motion controllers. The wide operating temperature range and -I grade qualification also support outdoor industrial installations. When designing with this device, allocate adequate decoupling (100 nF + bulk) close to each VDD/VSS pair, route the analog AVSS/AVDD pair as a quiet island separated from digital returns, and observe Microchip's motor-control layout guidelines for the on-chip op-amps and PGA. Always verify errata against the latest silicon revision before committing to high-volume firmware. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes for the PIC24EP512MC204T-I/PT that are not typically collected together on the manufacturer datasheet, supporting faster component selection and BOM risk reduction.

Angebot Kontakt

PIC24EP512MC206-E/MR

PIC24EP512MC206-E/MR - 60 MIPS 16-bit MCU, 512KB Flash | Microchip

The Microchip Technology PIC24EP512MC206-E/MR is a 16-bit microcontroller from the PIC24EP motor-control family, delivering up to 70 MIPS CPU performance (60 MIPS sustained throughput) with 512 KB Flash and 48 KB RAM, housed in a 64-pin QFN package (9x9 mm) with exposed pad. Designed for high-performance precision motor control, it integrates dedicated motor-control peripherals including a Quadrature Encoder Interface (QEI), Motor Control PWM (MCPWM), and high-speed 10/12-bit ADC, all of which reduce external component count in BLDC, PMSM, and ACIM drive designs. AEC-Q100 qualification makes this part suitable for automotive motor-control applications. A 16-bit microcontroller (MCU) is a programmable computing device that executes arithmetic on 16-bit-wide data words in a single instruction, sitting between 8-bit microcontrollers and 32-bit ARM Cortex-M devices in both performance and cost. Within the broader taxonomy, the PIC24EP belongs to: microcontroller -> embedded MCU -> DSP-enabled MCU -> motor-control MCU -> automotive MCU. Its 16-bit DSC (Digital Signal Controller) heritage gives it native fractional arithmetic and single-cycle MAC operations, which are valuable for real-time control loops running in the kHz range. Key features include a 3.0 V to 3.6 V single-supply operating range, 53 general-purpose I/O pins, USB 2.0 Full-Speed On-The-Go with integrated PHY, two CAN 2.0B modules, four UART/SPI/I2C peripherals, a Parallel Master Port (PMP), a 16-bit asynchronous Timer, and a charge-pump function. On-chip op amps simplify current-sensing signal conditioning in FOC motor control. The Instruction Trace (PSV) and multiple interrupt vectors accelerate real-time debugging. The CPU core uses a modified Harvard architecture with separate 24-bit instruction and 16-bit data paths, executing most instructions in a single cycle. Internal PLL supports up to 140 MHz FOSC from an external 7.37 MHz crystal. The 24KB RAM area is split between general-purpose SRAM and DMA-accessible buffers, supporting dual-port RAM for USB endpoint memory. Typical applications include sensorless and sensored BLDC/PMSM motor drives, automotive HVAC blowers and pumps, field-oriented control (FOC) inverters, factory-automation servo drives, drone ESCs, and industrial variable-frequency drives. The combination of QEI + MCPWM + 12-bit 1.1 Msps ADC allows the part to drive three-phase bridges with sub-microsecond dead-band control without external DSP. When designing with this device, allocate the exposed pad (EP) to a continuous ground copper pour with at least 25 thermal vias to dissipate switching-converter heat. Decouple VDD/VSS pairs with 100 nF + 4.7 uF ceramics placed within 3 mm of each pin pair. The MCPWM has a programmable dead-band range of 1-64 Tcy; verify the dead time against IGBT/MOSFET turn-off delay to prevent shoot-through. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical motor-control design notes not found in the manufacturer datasheet alone.

Angebot Kontakt

PIC24EP512MC206-E/PT

PIC24EP512MC206-E/PT - 70 MIPS 512KB Flash Motor Control MCU | Microchip

The Microchip Technology PIC24EP512MC206-E/PT is a 16-bit MCU from the PIC24EP family with integrated motor-control peripherals, 512 KB of Flash program memory, 48 KB RAM, and a 64-pin TQFP package. Designed for high-performance, precision motor-control applications, it executes instructions at up to 70 MIPS from a 60 MHz system clock, with on-chip dual 40 MHz op amps, a 12-bit ADC at 500 ksps, and dedicated PWM/QEI modules for field-oriented control of brushless DC, PMSM, AC induction, and stepper motors. What is a motor-control MCU? A motor-control microcontroller is an embedded processor that integrates the CPU with motor-control-specific peripherals such as high-resolution PWM timers, quadrature encoder interfaces, fast ADCs for current sensing, and analog comparators for hardware overcurrent protection. The PIC24EP512MC206-E/PT combines these peripherals on-chip to reduce external component count, lower BOM cost, and tighten the control loop latency below 100 microseconds, which is essential for sinusoidal commutation and torque-ripple minimization. Key features include AEC-Q100 qualification (extended grade), an extended -40C to +125C operating temperature range, 5 op-amp pairs, dual 4-channel high-speed PWM outputs with 7.14 ns resolution, three quadrature encoder interfaces, and USB-OTG, SPI, I2C, and UART connectivity. The integrated peripherals reduce the need for external signal-conditioning components, enabling compact BLDC and PMSM inverter designs. The PIC24EP architecture uses a 16-bit modified Harvard core with a 24-bit instruction word and DSP extensions. The DSP engine accelerates field-oriented-control algorithms such as Park and inverse-Park conversions, space-vector PWM, and PID controllers, enabling single-MCU FOC implementation for sensorless or sensored BLDC drives up to several kilowatts. Typical applications include sensorless and sensored BLDC/PMSM motor drives, industrial servo control, HVAC blowers and pumps, electric-vehicle auxiliary motors, e-bike and drone ESC controllers, and robotic actuator control loops. The -E temperature grade and AEC-Q100 qualification extend suitability to automotive under-hood and industrial environments. When designing with this device, verify the timing relationship between the PWM module and the ADC sampling trigger to achieve deterministic current sampling. The integrated op amps require careful PCB layout near the MCU; keep analog ground returns short to avoid coupling PWM switching noise into the current-sense path. This page synthesizes XAIPART distributor pricing, drop-in same-brand alternatives, and practical motor-control design guidance not consolidated on any single manufacturer or distributor page.

Angebot Kontakt

PIC24EP512MC206-H/MR

PIC24EP512MC206-H/MR - 16-Bit 60MIPS 512KB Flash Motor Control MCU | Microchip

The Microchip PIC24EP512MC206-H/MR is a high-performance 16-bit microcontroller from the PIC24E Motor Control family, delivering 70 MIPS at up to 60 MHz CPU clock and integrating 512 KB of Flash program memory with 48 KB of RAM in a 64-pin QFN (9x9 mm) package with an exposed thermal pad. The "-H" suffix denotes the high-temperature grade (-40C to +150C operating range), making it suitable for under-hood automotive and harsh industrial environments. The "MR" package code identifies the 64-pin QFN-EP. What is a motor-control MCU? A motor-control microcontroller (MCU) is a specialized 16-bit or 32-bit processor integrating timers, PWMs, ADCs, and quadrature encoder interfaces (QEI) to drive brushless DC, permanent-magnet synchronous, AC induction, and switched-reluctance motors in closed-loop control. In the embedded hierarchy, the PIC24EP512MC206 sits within: microcontroller -> 16-bit MCU -> dsPIC/PIC24 family -> motor-control peripheral set -> Microchip PIC24E series. This integrated approach replaces discrete DSPs and external PWM controllers, shrinking BOM and improving loop bandwidth. Key features of this part include: up to six PWM channels with complementary outputs and dead-band control; three op-amps for current sensing; four 16-bit timers; three UART, two SPI, two I2C peripherals; up to 16 channels of 10-bit ADC at 1.1 Msps or 12-bit ADC at 500 ksps; a Quadrature Encoder Interface (QEI); and a Peripheral Trigger Generator (PTG) for synchronizing ADC sampling to PWM events. The 60 MIPS performance enables field-oriented control (FOC) of three-phase PMSM motors with sub-microsecond current-loop execution. The device's Enhanced Motor Control PWM (MCPWM) module features 7.14 ns PWM resolution, independent fault inputs, and PWM-triggered ADC conversions for deterministic sampling. Combined with the on-chip op-amps and a high-speed 12-bit ADC, the MCU can sample phase currents, execute a FOC loop, and update PWM duty cycles entirely on-chip - eliminating external DSPs in motor-drive designs. Typical applications include field-oriented control (FOC) of PMSM/BLDC motors in industrial servo drives, ceiling fans and pumps, e-bike traction controllers, HVAC blowers, and automotive auxiliary pumps. The wide 3.0V-3.6V supply range and integrated peripherals simplify BOM and reduce time-to-market. When designing with this device, use the MPLAB X IDE with the MPLAB Code Configurator (MCC) for automatic peripheral initialization. The exposed thermal pad must be soldered to a sufficient copper pour for heat dissipation; the -H temperature grade allows operation up to +150C junction. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes beyond what the manufacturer datasheet alone provides.

Angebot Kontakt

Unterkategorien

Produkte (32865)

PIC24EP512GU810T-I/PT - 16-Bit 60 MIPS MCU, USB, Dual CAN, 100-TQFP | Microchip

PIC24EP512GU814-E/PL - 16-Bit MCU, 512KB Flash, USB, 2x CAN | Microchip

PIC24EP512GU814-I/PL - 16-bit MCU 512KB Flash USB CAN | Microchip

PIC24EP512GU814T-I/PH - 512KB Flash, USB, Dual CAN 16-bit MCU

PIC24EP512GU814T-I/PL - 60 MIPS, 512KB Flash, USB/CAN MCU | Microchip

PIC24EP512MC202-E/SO - 70MIPS 16-bit Motor Control MCU | Microchip

PIC24EP512MC202-E/SP - 70 MIPS Motor Control MCU | Microchip

PIC24EP512MC202-H/MM - 70 MIPS Motor Control MCU 512KB Flash | Microchip

PIC24EP512MC202-H/SP - 70 MIPS 16-bit Motor Control MCU, 512KB Flash | Microchip

PIC24EP512MC202T-E/MM - 60 MIPS 16-bit Motor Control MCU | Microchip

PIC24EP512MC202T-E/SO - 60 MIPS 16-Bit MCU, 512KB Flash | Microchip

PIC24EP512MC202T-I/SO - 16-bit 70MIPS 512KB Flash MCU | Microchip

PIC24EP512MC204-H/ML - 60 MIPS 512KB Flash MCU | Microchip

PIC24EP512MC204-H/PT - 16-bit 70 MIPS MCU 512KB Flash | Microchip

PIC24EP512MC204-H/TL - 70 MIPS 512KB Flash Motor MCU | Microchip

PIC24EP512MC204-I/ML - 70 MIPS 16-Bit Motor Control MCU | Microchip

PIC24EP512MC204-I/TL - 16-bit 70MIPS 512KB Flash MCU | Microchip

PIC24EP512MC204T-E/TL - 16-Bit 60 MIPS 512KB Flash MCU | Microchip

PIC24EP512MC204T-I/ML - 16-Bit 70MIPS 512KB Flash MCU | Microchip

PIC24EP512MC204T-I/MV - 70 MIPS 16-bit Motor Control MCU | Microchip

PIC24EP512MC204T-I/PT - 16-bit 70MIPS 512KB Flash MCU | Microchip

PIC24EP512MC206-E/MR - 60 MIPS 16-bit MCU, 512KB Flash | Microchip

PIC24EP512MC206-E/PT - 70 MIPS 512KB Flash Motor Control MCU | Microchip

PIC24EP512MC206-H/MR - 16-Bit 60MIPS 512KB Flash Motor Control MCU | Microchip