Integrierte Schaltungen

PIC24FJ32GU202-E/SO

PIC24FJ32GU202-E/SO - 16-bit 32KB ECC Flash USB MCU | Microchip

The Microchip Technology PIC24FJ32GU202-E/SO is a 16-bit eXtreme Low-Power (XLP) microcontroller from the PIC24FJ GP2/GU2 family, delivering 16 MIPS performance from a 32 MHz PIC24 CPU core, integrating 32 KB of ECC Flash program memory (11K x 24) and 8 KB of RAM, and housed in a 28-pin SOIC (SO) wide-body package. It integrates a Full-Speed USB 2.0 Host/Device/OTG transceiver on-chip, eliminating the need for an external PHY in cost-sensitive USB designs. The part operates across a 2.0 V to 3.6 V supply range (nominal 3.3 V), supports the extended industrial temperature grade (-40 °C to +125 °C) as denoted by the 'E' designator, and provides multiple 16-bit timers, configurable I/O, and Core Independent Peripherals (CIPs). A 16-bit microcontroller (MCU) is an embedded processor with a 16-bit data path, register file, and ALU, positioned between 8-bit entry-level MCUs and 32-bit Cortex-M class devices. The PIC24FJ family extends Microchip's 16-bit dsPIC/PIC24 line with XLP nanoWatt technology and dedicated USB-OTG silicon, targeting battery-powered and tethered peripherals that demand deterministic interrupt response, hardware CIPs for offloading the CPU, and USB connectivity in a single die. Key differentiating specifications include integrated Full-Speed USB 2.0 Host/Device/OTG, 32 KB ECC Flash with hardware error correction for improved reliability in harsh environments, 8 KB RAM that supports USB endpoint buffers plus application stack/heap, and XLP sleep currents in the hundreds of nanoamperes while retaining SRAM and interrupt context. The 16 MIPS performance at 32 MHz gives 62.5 ns instruction cycle, suitable for real-time control loops. Peripherals typically include multiple UART/SPI/I2C, a 10/12-bit ADC, comparators, and RTCC. Typical applications are USB Human Interface Devices (HID), USB-to-UART bridges, low-power sensor loggers, industrial data loggers with USB upload, medical point-of-care USB peripherals, and battery-powered consumer accessories. The 28-SOIC footprint eases hand-soldering and rework for prototypes and small-volume production. When designing, allocate the 8 KB RAM carefully between USB endpoint FIFOs and application data to avoid overrun, place the USB DP/DM traces as a 90-ohm differential pair, and bypass VDD/VUSB with 100 nF plus 4.7 µF bulk capacitors placed within 5 mm of the pins. This page synthesizes distributor pricing, same-brand Microchip drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, giving the buyer a single reference for selecting and validating the PIC24FJ32GU202-E/SO.

Angebot Kontakt

PIC24FJ32GU202-E/SS

PIC24FJ32GU202-E/SS - 16-Bit 32MHz USB MCU, 32KB Flash | Microchip

The Microchip Technology PIC24FJ32GU202-E/SS is a 16-bit microcontroller from the PIC24FJ GP2/GU2 family that integrates Full-Speed USB 2.0 Host/Device/OTG, 32KB of ECC Flash program memory (11K x 24 words), and 8KB of RAM in a 28-pin SSOP package. It executes up to 16 MIPS at a 32 MHz CPU clock and is targeted at low-power embedded designs with sleep currents down to a few hundred nanoamperes, retaining the complete SRAM and configuration state. The PIC24FJ family sits at the intersection of the 16-bit microcontroller class and the wider 8/16/32-bit MCU hierarchy. PIC microcontrollers (Peripheral Interface Controllers) are Harvard-architecture RISC devices originally introduced by Microchip in 1975. The 16-bit PIC24F sub-family targets low-power (XLP) applications and adds a modified Harvard bus, a 16-bit data path, and DSP-friendly instructions while staying within a 2V to 3.6V supply envelope. This particular part adds an integrated USB 2.0 Full-Speed transceiver, eliminating the need for an external PHY on USB-equipped designs. Key features include Core Independent Peripherals (CIPs) such as configurable logic cells, multiple capture/compare/PWM modules, a 10/12-bit ADC, and a hardware RTCC. The 32 KB ECC Flash improves reliability in harsh environments, while 8 KB of RAM supports modest buffering for USB and sensor pipelines. The device also offers multiple sleep modes (deep sleep, retention, and idle) with a few-hundred-nA typical sleep current. Architecturally, the PIC24FJ32GU202 uses Microchip's modified Harvard design with separate program and data buses, a 16-bit instruction word, and a 32 MHz maximum internal oscillator. The integrated USB module supports Host, Device, and On-The-Go roles, and the on-chip 1.5 kB USB endpoint RAM covers typical CDC/HID/MSD classes. Core Independent Peripherals operate without CPU intervention, allowing the core to remain in sleep and reducing overall system power. Typical applications include USB HID peripherals, USB-to-UART bridges, low-power sensor hubs, consumer medical data loggers, battery-powered IoT edge nodes, and embedded human-interface devices. Designers can also use the on-chip USB and the 8 KB RAM to implement small mass-storage or CDC virtual COM-port functions. The wide 2V to 3.6V operating range makes the part suitable for single-cell Li-ion powered hardware. A key design consideration is the 28-pin SSOP package: only 20 of the 28 pins are user I/O, so high-pin-count peripherals are limited; multiplexing with the integrated USB signals is essential. The E temperature grade extends operating range from -40C to +125C, suiting industrial and outdoor deployments. For prototyping, the MPLAB X IDE and the XC16 compiler form a complete toolchain, with the PICkit or ICD programming/debugging probes supporting on-board flash programming. This page synthesizes distributor pricing, drop-in same-package alternatives drawn from the PIC24FJ family, and practical design notes that are not consolidated in the manufacturer datasheet alone.

Angebot Kontakt

PIC24FJ32GU202-I/ML

PIC24FJ32GU202-I/ML - 16-bit USB MCU 32KB Flash 28-QFN | Microchip

The Microchip Technology PIC24FJ32GU202-I/ML is a 16-bit PIC microcontroller from the PIC24FJ GP2/GU2 family, featuring a 32 MHz MIPS core, 32 KB of ECC Flash program memory (11K x 24 words), 8 KB of RAM, and an integrated Full-Speed USB 2.0 Host/Device/OTG controller, all housed in a 28-pin QFN (6x6 mm) surface-mount package. According to the Microchip product page, the device operates from 2.0V to 3.6V and supports sleep currents down to a few hundred nanoamps while retaining complete SRAM and RTCC operation, making it a member of the eXtreme Low-Power (XLP) family. A 16-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash/RAM), and peripherals on one silicon die. PIC24F devices use a 16-bit modified Harvard RISC architecture with a 24-bit instruction word, sitting in the hierarchy between 8-bit PIC16/PIC18 MCUs and 32-bit PIC32MX/ARM Cortex-M parts. The PIC24FJ32GU202 belongs to the broader category of embedded microcontrollers, which are the foundational building blocks of modern electronic systems, responsible for executing firmware that controls sensors, communication interfaces, displays, and actuators. The PIC24FJ32GU202 integrates several features that differentiate it within the PIC24FJ family: an integrated USB 2.0 Full-Speed transceiver supporting Host, Device, and OTG roles (a rare combination at this pin count), four 16-bit timers, a 10-bit ADC with up to 9 channels, multiple serial interfaces (UART, SPI, I2C), and a chargeable RTCC. Its eXLP (Extreme Low Power) design includes multiple low-power operating modes, deep sleep with RTCC retention drawing only hundreds of nA, and a peripherals-only mode that keeps CIPs running while the CPU sleeps. Typical applications include USB peripherals (HID, CDC, MSD class devices), wearable health and fitness sensors, battery-powered IoT end nodes with USB charging, low-power sensor hubs, industrial data loggers, and consumer devices that need a single MCU to handle both USB connectivity and low standby power. The 28-QFN package provides 20 usable I/O pins and is footprint-compatible with other PIC24FJ32GU2-series parts, allowing easy migration between memory sizes within the family. When designing with this part, plan for the integrated USB PHY's 48 MHz clock requirement: either use the internal PLL with an external 8 MHz crystal, or provide an external 48 MHz source. The CIPs (Core Independent Peripherals) such as the 16-bit PWM and configurable logic cells can offload tasks from the CPU, reducing firmware complexity and active time. Vcap pin decoupling per datasheet recommendations is required for core regulator stability.

Angebot Kontakt

PIC24FJ32GU202-I/MV

PIC24FJ32GU202-I/MV - 32KB Flash USB MCU | Microchip 28-UQFN

The Microchip Technology PIC24FJ32GU202-I/MV is a 16-bit PIC microcontroller from the PIC24FJ 'GP2/GU2' family featuring 32 KB of ECC Flash, 8 KB of RAM, and integrated Full-Speed USB 2.0 Host/Device/OTG support, housed in a compact 28-pin UQFN (4x4 mm) package. It operates at up to 32 MHz (16 MIPS) from a 2.0-3.6V supply, combining high-performance 16-bit processing with extreme-low-power (XLP) sleep modes in the few-hundred-nA range while retaining SRAM and peripheral state. According to the Microchip product page, the device integrates core-independent peripherals (CIPs) that allow hardware-driven tasks to run without CPU intervention. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory, data memory, and peripherals on a single die. Within the broader semiconductor taxonomy, the PIC24FJ32GU202 sits in the 16-bit MCU category, between 8-bit PIC10/12/16 families and 32-bit ARM Cortex-M parts. The PIC24FJ sub-family specifically targets low-power connected applications: 'GP' variants omit USB for general-purpose use, while 'GU' variants add USB 2.0 with on-chip transceiver and charge-pump-less operation directly from VBUS. Key differentiating features include hardware ECC on Flash for enhanced reliability, deep sleep currents below 1 uA with retention, and rich connectivity including USB, UART, SPI, I2C, and 10-bit ADC. The 28-UQFN (MV) package is the smallest footprint option in the family, ideal for space-constrained wearable and IoT designs. Typical applications include USB HID peripherals, wearable health sensors, IoT edge nodes with USB charging, consumer electronics with USB-C interfaces, and battery-powered sensor hubs that require periodic USB enumeration for firmware updates or data sync. When designing with this device, plan the VBUS/USB pin protection network carefully, use the internal voltage regulator with adequate bulk capacitance on VCAP, and leverage the deep-sleep CIPs to minimize average current in battery-powered deployments.

Angebot Kontakt

PIC24FJ32GU202T-I/ML

PIC24FJ32GU202T-I/ML - 32KB Flash, USB, 28-QFN MCU | Microchip

The Microchip PIC24FJ32GU202T-I/ML is a 16-bit microcontroller from the PIC24F family, featuring 32KB of ECC Flash, 8KB of RAM, and integrated Full-Speed USB 2.0 Host/Device/OTG support, housed in a 28-pin QFN (6x6 mm) package. It operates at up to 32 MHz (16 MIPS) with a 16-bit modified Harvard architecture, and runs from a 2.0V to 3.6V supply, making it ideal for low-power, USB-enabled embedded designs. What is a PIC24F microcontroller? A PIC24F is a 16-bit flash microcontroller from Microchip built on a modified Harvard architecture with a 16-bit data path and 24-bit instruction word. Within the broader taxonomy it sits between the 8-bit PIC16/PIC18 families and the 32-bit PIC32 families, and within power management it serves as the host MCU that orchestrates USB, ADC, PWM, and CIP peripherals. The 'FJ' family specifically emphasizes low-power XLP operation (sleep currents in the hundreds of nA), ECC flash memory for reliability, and rich connectivity including USB 2.0 FS. Key features include 32KB of program flash with Error Correction Code (ECC), 8KB of RAM, up to 20 general-purpose I/O pins, and a hardware Full-Speed USB 2.0 transceiver supporting Host, Device, and On-The-Go roles. The device integrates Microchip's Core Independent Peripherals (CIPs) such as configurable logic cells, multiple timers, a 10-bit ADC, comparators, and RTCC. Sleep current is specified down to a few hundred nanoamperies while retaining RAM and the real-time clock, an order of magnitude lower than typical USB MCUs. The PIC24FJ32GU202T-I/ML is a member of the PIC24FJ GP2/GU2 family, which provides up to 64KB flash and 8KB RAM across variants. The 'GU2' subfamily specifically adds the USB 2.0 Full-Speed transceiver. The modified Harvard bus architecture separates program and data memory paths, allowing simultaneous fetch and read/write, and the 16 MIPS performance at 32 MHz is sufficient for USB protocol handling plus application logic in a single chip. Typical applications include USB peripherals (HID, CDC, MSD), USB battery chargers with BC1.2, USB OTG dual-role devices, low-power sensor hubs with USB-C connectivity, medical USB dongles, and consumer electronics that need USB plus XLP sleep for battery operation. The combination of ECC flash (critical for USB bootloader reliability) and USB hardware saves a dedicated PHY chip. Design consideration: the integrated USB transceiver requires external 15K pull-down resistors on D+ and D- lines plus a 1uF bypass cap on VUSB, and the 28-QFN exposed pad must be soldered to the ground plane for both electrical and thermal dissipation. VUSB must be tied to VDD or driven by an internal 3.3V LDO via the VBUS pin to avoid back-powering when the device is unplugged. This page synthesizes distributor pricing, drop-in alternatives within the PIC24FJ family, and practical USB design notes not always found in the manufacturer datasheet summary.

Angebot Kontakt

PIC24FJ32GU202T-I/SO

PIC24FJ32GU202T-I/SO - 16-bit MCU 32KB Flash USB XLP | Microchip

The Microchip PIC24FJ32GU202T-I/SO is a 16-bit PIC24F microcontroller with 32 KB ECC Flash, 8 KB RAM, Full-Speed USB 2.0 (Host/Device/OTG), and eXtreme Low Power (XLP) sleep modes, housed in a 28-pin SOIC package. It runs up to 32 MHz (16 MIPS) from a 2.0 V to 3.6 V supply and integrates several core-independent peripherals for low-power mixed-signal designs. A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory (Flash), volatile working memory (RAM), and a rich set of on-chip peripherals such as timers, communication controllers, ADCs, and GPIOs. MCUs sit at the bottom of the embedded-compute hierarchy: MCU -> microcontroller -> embedded processor -> semiconductor. The PIC24F family specifically targets ultra-low-power applications and uses a 16-bit modified Harvard architecture, allowing single-cycle instruction execution and deterministic interrupt response, which is why it is preferred for real-time control and low-power sensing. Key features of this device include 32 KB ECC Flash (11K x 24 words), 8 KB SRAM, Full-Speed USB 2.0 with on-chip transceiver and internal pull-up, a 10-bit ADC up to 500 ksps, multiple hardware UART/SPI/I2C modules, RTCC with calendar mode, and XLP sleep currents measured in the low microamp range. The on-chip USB PHY eliminates the external transceiver typically required for USB on small MCUs, reducing both BOM cost and PCB area. In the field, the part is used in USB HID peripherals such as PC accessories, gaming input devices, low-power sensor nodes, and consumer-electronic human-interface products. The wide operating voltage (2.0 V to 3.6 V) and XLP modes also make it a strong fit for battery-powered data loggers and wearable reference designs where sleep current dominates battery life. When designing, place a 1 uF decoupling capacitor within 5 mm of the VDD pin, route the USB DP/DM traces as a 90-ohm differential pair, and bias the unused VUSB pin per the USB section of the PIC24FJ GP2/GU2 family datasheet. Use the ICD 3 or MPLAB REAL ICE tool for in-circuit debug and MPLAB X IDE for code development. This page synthesizes distributor stock and pricing, drop-in PIC24F alternatives, and practical design notes not assembled in the manufacturer datasheet, enabling faster sourcing and BOM decisions for USB-enabled 16-bit embedded designs.

Angebot Kontakt

PIC24FJ32GU202T-I/SS

PIC24FJ32GU202T-I/SS - 16-bit 32MHz 32KB USB MCU | Microchip

The Microchip Technology PIC24FJ32GU202T-I/SS is a 16-bit PIC microcontroller from the PIC24F family that integrates a Full-Speed USB 2.0 controller and XLP (eXtreme Low-Power) technology, housed in a 28-pin SSOP package. It features a 32MHz MIPS16 CPU core, 32KB of ECC Flash program memory (11K x 24 organization), 8KB of RAM, and operates from 2.0V to 3.6V, making it suitable for USB-equipped low-power products. The "T" suffix denotes Tape & Reel packaging, the "I" suffix indicates the industrial -40°C to +85°C temperature grade, and the "/SS" suffix specifies the 28-pin SSOP package. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and a rich set of peripheral interfaces (timers, ADC, UART, USB, I2C, SPI, GPIO). The PIC24F family sits within Microchip's 16-bit portfolio, offering higher computational throughput (up to 16 MIPS at 32 MHz) than 8-bit PIC MCUs while preserving the PIC heritage of deterministic interrupt handling and a compact instruction set. Within the broader hierarchy, the PIC24FJ32GU202 belongs to: MCU -> microcontroller -> 16-bit MCU -> PIC24F family -> PIC24FJ GP2/GU2 sub-family, with the GU2 designation specifically adding Full-Speed USB 2.0 Host/Device/OTG capability. Key features of the PIC24FJ32GU202 include up to 64KB of ECC Flash across the family, 8KB of RAM, multiple Core Independent Peripherals (CIPs) such as configurable logic cells, multiple-output Capture/Compare/PWM, and a 10-bit ADC. The XLP technology drives sleep current down to a few hundred nanoamperes while retaining RAM contents and peripheral state, enabling battery-powered designs that can run for years on a single coin cell. The integrated USB 2.0 Full-Speed transceiver eliminates the need for an external PHY, allowing the MCU to act as a USB device, host, or On-The-Go (OTG) dual-role controller with minimal external components. Typical applications include USB HID peripherals (keyboards, mice, game controllers), USB-to-UART bridge dongles, USB data loggers, portable medical and wellness devices, low-power sensor nodes with USB charging, and consumer accessories that require both a USB interface and long battery life. The 28-pin SSOP footprint offers enough GPIO for small user interfaces while staying within the Low Pin Count Package (LPC) family that simplifies PCB routing. When designing with this device, place a 1µF decoupling capacitor adjacent to each VDD/VSS pair, route the USB D+/D- lines as a 90-ohm differential pair, and ensure the VBUS/VUSB sense pin is properly connected to enable USB VBUS detection.

Angebot Kontakt

PIC24FJ32GU203-E/M5

PIC24FJ32GU203-E/M5 - 16-bit USB MCU, 32KB Flash | Microchip

The Microchip Technology PIC24FJ32GU203-E/M5 is a 16-bit PIC24F microcontroller with 32KB (11K x 24) of ECC Flash program memory, 8KB of RAM, and integrated Full-Speed USB 2.0 Host/Device/OTG, operating at up to 32 MHz (16 MIPS) in a 36-pin UQFN (5x5 mm) package. It belongs to the PIC24FJ 'GP2/GU2' family, which combines core independent peripherals with eXtreme Low Power (XLP) sleep currents down to a few hundred nA while retaining complete RAM and register state. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), and a configurable set of peripheral interfaces on one die. PIC24F devices sit in the broader hierarchy as 16-bit microcontrollers -> microcontrollers -> embedded processors -> semiconductors. The '24F' series uses a modified Harvard architecture with a 16-bit datapath and 24-bit instruction word, delivering higher code density and deterministic interrupt latency than 8-bit MCUs while remaining lower power than 32-bit ARM Cortex-M parts at comparable MHz. The 'FJ' suffix denotes Flash program memory with JTAG/ICD debugging support, and 'GU2' indicates the USB-equipped variant. Key differentiating features of the PIC24FJ32GU203 include: 32 KB ECC Flash (single-bit error correction for automotive-grade reliability), 8 KB RAM, USB 2.0 Full-Speed On-The-Go (Host/Device/OTG), 5x Multi-Capture/Compare/PWM (MCCP) modules, 6x general-purpose timers, 4x Configurable Logic Cells (CLC), 2x DMA channels, 3x analog comparators, 2x I2C, 2x SPI, and 2x UART. The 'E' suffix specifies the extended -40C to +125C operating temperature grade. The architecture is a 16-bit pipelined PIC24 CPU core with hardware multiply/divide, executing most instructions in one cycle. The CIP (Core Independent Peripheral) blocks - CLC, MCCP, and DMA - allow events to be processed without CPU intervention, freeing the core for higher-level tasks and reducing active-mode power. XLP technology enables deep sleep retention currents measured in hundreds of nA, ideal for battery-powered IoT edge nodes. Typical applications include USB HID peripherals (keyboards, mice, custom input devices), USB-to-UART bridges, USB chargers, low-power IoT sensor nodes, USB medical device interfaces, USB audio class devices, and industrial data loggers with USB connectivity. The wide temperature range supports automotive and industrial deployments. When designing with this MCU, reserve pin D+/D- (typically RB14/RB15 on the 36-pin UQFN) for USB and ensure an external 48 MHz primary oscillator configuration is selected for USB operation; the internal FRC is too inaccurate for USB Full-Speed signalling. The 5x5 mm UQFN package uses an exposed thermal pad that must be soldered to a copper pour for thermal and electrical performance. This page synthesizes distributor pricing, drop-in alternatives, application guidance, and design notes not found in the manufacturer datasheet alone - providing practical decision support for engineers sourcing USB-capable 16-bit PIC24 microcontrollers.

Angebot Kontakt

PIC24FJ32GU203-I/M5

PIC24FJ32GU203-I/M5 - 32KB Flash 16-bit USB MCU | Microchip

The Microchip Technology PIC24FJ32GU203-I/M5 is a 16-bit eXtreme Low-Power (XLP) microcontroller featuring a 32MHz PIC24 CPU core with 32KB ECC Flash program memory and 8KB RAM, packaged in a 36-pin UQFN (5x5 mm). The device integrates Full-Speed USB 2.0 Host/Device/OTG, multiple Core Independent Peripherals (CIPs), and sleep currents down to a few hundred nanoamperes, making it suitable for USB-enabled battery-powered embedded systems. A 16-bit PIC microcontroller (MCU) is a member of the microcontroller family that uses a 16-bit data path, instruction word, and register architecture, sitting hierarchically between 8-bit MCUs (PIC16, AVR) and 32-bit MCUs (Cortex-M, PIC32). The 16-bit MCU category is widely deployed in mixed-signal embedded products because it offers a balanced trade-off between computational throughput, peripheral integration, and low-power operation. Within the PIC24F family, the 'GU2' sub-family adds integrated USB 2.0 Full-Speed connectivity alongside nanoWatt XLP technology. The PIC24FJ32GU203-I/M5 delivers 16 MIPS performance, supports up to 26 I/O lines, and includes multiple communication peripherals (I2C, SPI, UART) alongside its USB interface. The 32KB ECC Flash provides single-error-correction and dual-error-detection memory protection, increasing reliability in safety-sensitive applications. The integrated USB 2.0 Full-Speed transceiver supports Host, Device, and On-The-Go (OTG) operation without external components, lowering BOM cost. Typical applications include USB peripherals (HID-class devices, CDC virtual COM ports, mass storage), low-power IoT sensor nodes with USB diagnostics interfaces, wearable health monitors, USB battery chargers, and portable industrial data loggers. The wide operating voltage range (2.0V to 3.6V) and nanoWatt XLP sleep modes extend battery life in energy-harvesting designs. When designing with this MCU, ensure the USB D+/D- trace impedance is controlled to 90 ohms differential and that the VUSB pin is bypassed with a 0.1uF ceramic capacitor. Configure the on-chip LDO (if used to power the USB transceiver from VBUS) before enabling USB peripherals to avoid bus-state errors. Use the Configurable Logic Cell (CLC) and Peripheral Pin Select (PPS) to map functions to physical pins without board rework. This page synthesizes distributor pricing from DigiKey and Mouser, parametric alternatives, and practical low-power USB design notes not consolidated in the Microchip datasheet.

Angebot Kontakt

PIC24FJ32GU203T-I/M5

PIC24FJ32GU203T-I/M5 - 32KB USB MCU, 36-UQFN | Microchip

The Microchip Technology PIC24FJ32GU203T-I/M5 is a 16-bit PIC microcontroller from the PIC24FJ 'GP2/GU2' family, delivering 16 MIPS at 32 MHz with 32 KB of ECC Flash and 8 KB of RAM in a 36-pin 5x5 mm UQFN package. It integrates Full-Speed USB 2.0 Host/Device/OTG, multiple Core Independent Peripherals (CIPs), and Microchip's eXtreme Low Power (XLP) technology with sub-microamp sleep currents while retaining RAM and peripherals. The 'T' suffix denotes Tape & Reel packaging, while the 'I' suffix indicates the industrial -40C to +85C temperature grade, and 'M5' is the package designator for the 5x5 mm 36-UQFN. An MCU (Microcontroller Unit) is a single-chip computer that integrates a CPU core, program memory, working RAM, and a configurable peripheral set around an internal bus. The PIC24F family uses a 16-bit modified Harvard architecture with a wide 24-bit instruction word, giving it higher code density than 8-bit MCUs while retaining deterministic interrupt response. Within Microchip's portfolio, the PIC24F sits between the 8-bit PIC18 and the 32-bit PIC32, targeting low-power connected applications with USB. Key hypernyms: MCU -> microcontroller -> embedded controller -> semiconductor IC. Key features include 32 MHz maximum CPU clock, 32 KB (11K x 24) ECC Flash for code and data storage, 8 KB RAM, and a 2.0V to 3.6V VDD operating range suited to single-cell Li-ion or 3.3V regulated rails. The device integrates 2x I2C, 2x SPI, 2x UART, 1x USB FS Host/Device/OTG, 5x MCCP/SCCP timers, 6x general-purpose timers, 3x analog comparators, 4x Configurable Logic Cells (CLC), and 2x DMA channels. With XLP technology, sleep currents drop to a few hundred nanoamps while retaining state, enabling years of battery life on coin cells. Typical applications include USB HID peripherals such as keyboards, mice, and game controllers, USB-to-UART bridges, battery-powered IoT sensor nodes with USB charging, wearable health monitors, and low-power human-interface devices. The compact 36-UQFN 5x5 mm footprint makes it well-suited to space-constrained consumer and industrial designs. When designing with this part, place the 0.1 uF VDD decoupling capacitor within 3 mm of the VDD pin and provide a 4.7 uF bulk capacitor on the USB VBUS rail if the device is bus-powered. Ensure the 32.768 kHz secondary oscillator load capacitors are matched to the crystal manufacturer's CL specification to avoid start-up failures. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC24FJ GP/GU family, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt

PIC24FJ32GU205-E/M4

PIC24FJ32GU205-E/M4 - 32KB USB XLP MCU 16-bit | Microchip

The Microchip Technology PIC24FJ32GU205-E/M4 is a 16-bit microcontroller from the PIC24FJ GP2/GU2 family, integrating 32KB ECC Flash, 8KB RAM, and Full-Speed USB 2.0 Host/Device/OTG into a compact 48-pin UQFN (6x6 mm) package. It operates at up to 32 MHz (16 MIPS) across an industrial 2.0V to 3.6V core supply, with eXtreme Low Power (XLP) sleep currents in the hundreds of nA while retaining core independent peripherals (CIPs) and full RAM. The PIC24FJ32GU205-E/M4 suffix /M4 denotes the 48-pin UQFN package, and the -E prefix designates the extended -40C to +125C operating temperature grade for harsh-environment deployments. A 16-bit MCU is a microcontroller with a 16-bit data path, register width, and ALU, sitting between 8-bit MCUs (PIC16, AVR) and 32-bit MCUs (Cortex-M, PIC32). The PIC24F family is Microchip's 16-bit ultra-low-power line, and the GU2 sub-family specifically adds Full-Speed USB plus rich CIPs - hardware timers, CRC, RTCC, comparators, and ADC - that run without CPU intervention, which is critical for low-power IoT and USB device designs. Key features include hardware USB 2.0 Full-Speed with on-chip transceiver and internal pull-ups, 32KB ECC Flash (11K x 24 words) for code and data EEPROM emulation, 8KB SRAM, and multiple power-saving modes including Deep Sleep with RTCC, allowing battery-powered designs to retain state for years. The 48-pin UQFN exposes up to 38 I/O, three 16-bit timers, a 12-bit ADC, three UARTs, two SPI, two I2C, and the USB endpoint hardware. Internal die temperature sensor and watchdog timer add diagnostic and safety hooks. Typical applications include USB HID peripherals (keyboards, mice, custom input devices), USB-to-UART/SPI/I2C bridges, USB battery chargers, sensor hubs, portable medical accessories, and e-metering or industrial data loggers. The extended -40C to +125C range also supports automotive interior and under-hood telemetry where USB-C diagnostics ports are used. Pair the device with a USB Type-C port controller or direct USB Micro-B connector; the internal pull-ups and full-speed PHY remove the need for an external PHY chip. Design consideration: Place the VUSB3V3 pin's 0.47uF decoupling capacitor within 2 mm of the pin to keep USB signal-integrity margins; route D+/D- as a 90 ohm differential pair. The UQFN's exposed pad must be soldered to a continuous ground pour to meet the 31 C/W theta_JA thermal rating. Bulk-decouple VDDCORE and AVDD separately with 1uF X7R ceramics, and add 10uF on VBUS for inrush surge support. This page synthesizes verified distributor pricing, drop-in alternatives, and practical design notes that you will not find in the manufacturer datasheet alone, including same-family variants in the Site MPN list that share the 48-pin UQFN (M4) footprint for direct PCB reuse.

Angebot Kontakt

PIC24FJ32GU205-E/PT

PIC24FJ32GU205-E/PT - 32KB Flash USB MCU 48-TQFP E-temp | Microchip

The Microchip Technology PIC24FJ32GU205-E/PT is a 16-bit PIC24F microcontroller with integrated Full-Speed USB 2.0 Host/Device/OTG, 32KB of ECC Flash program memory, and 8KB of SRAM, housed in a 48-pin TQFP (7x7 mm) package rated for the -40C to +125C extended (E) temperature range. It runs the 16-bit PIC24F core at up to 32MHz (16 MIPS), delivering the right balance of throughput and deterministic interrupt response for connected-embedded USB applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile data memory (SRAM), and a set of on-chip peripherals (timers, ADC, communication controllers, I/O). In the wider taxonomy, this part is a 16-bit MCU, a sub-class of microcontrollers, which itself sits under embedded processors and ultimately semiconductors. The PIC24F architecture adds hardware Multiply/Divide and DSP-oriented instructions to the standard PIC instruction set, simplifying sensor-signal and audio-rate processing without offloading to a companion DSP. Key features include hardware ECC on Flash for improved data retention, eXtreme Low Power (XLP) sleep modes with currents in the few-hundreds-of-nA range while retaining core state, a 12-bit ADC with up to 16 channels, multiple UART/SPI/I2C peripherals, and Core Independent Peripherals (CIPs) that let hardware timers and logic blocks operate without CPU intervention. The integrated USB 2.0 Full-Speed transceiver plus on-chip PHY removes the need for an external PHY in HID, CDC, vendor-class, or basic host applications. Typical applications include USB HID/CDC peripherals (barcode scanners, custom HIDs), low-power sensor nodes with periodic USB wake, industrial data loggers over USB, USB-to-UART bridges, and battery-powered medical or instrumentation devices needing deterministic 16-bit control plus USB connectivity. E-temp operation opens automotive under-hood and industrial cabinet deployments where commercial-grade parts would fail. When designing with this part, budget the 48-pin TQFP thermal envelope for the E-temp range and confirm the USB bus-power profile against the target host; on-chip regulation and self-powered bus operation are both supported but require careful bypassing. Plan the linker layout so the USB vector is in the upper region for deterministic interrupt latency. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt

PIC24FJ32GU205-I/PT

PIC24FJ32GU205-I/PT - 16-bit 32MHz 32KB Flash USB MCU TQFP-48 | Microchip

The Microchip Technology PIC24FJ32GU205-I/PT is a 16-bit microcontroller from the PIC24F GP2/GU2 family that integrates Full Speed USB 2.0 Host/Device/OTG, 32KB of ECC Flash program memory, and 8KB of RAM in a 48-pin TQFP (7x7 mm) package. It operates at up to 32 MHz (16 MIPS) from a 2.0-3.6V supply, with eXtreme Low Power (XLP) sleep currents down to a few hundred nanoamperes while retaining SRAM and core-independent peripherals. The device ships in the industrial temperature grade (-40C to +85C) and is part of Microchip's low-pin-count USB-capable MCU lineup. A PIC microcontroller (Programmable Integrated Circuit) is a single-chip computer built around a RISC core, on-chip Flash for program storage, RAM for data, and a rich set of peripherals. PIC24F devices use a 16-bit modified Harvard architecture, positioning them between 8-bit PIC16/PIC18 parts and 32-bit PIC32 parts. They are widely used in low-power, mixed-signal embedded designs that need deterministic behavior and a small footprint without stepping up to ARM Cortex-M silicon. Within the broader taxonomy, the PIC24FJ32GU205 belongs to: microcontroller -> 16-bit MCU -> PIC24F family -> eXtreme Low Power subfamily -> USB-enabled GU2 series. Key features include four 16-bit timers, a 12-bit A/D converter with up to 13 channels, configurable logic cells, multiple UART/SPI/I2C peripherals, and a hardware RTCC. The on-chip Full-Speed USB 2.0 transceiver and SIE simplify designs that need USB device, host, or OTG without an external PHY. ECC Flash improves reliability in industrial and consumer applications by detecting single-bit errors at runtime. The 48-pin TQFP provides ample GPIO while remaining compatible with hand-solderable prototypes and standard 0.5 mm pitch reflow profiles. Typical applications include low-power USB peripherals (HID, CDC, custom HID sensors), portable medical instruments, e-metering and sensor hubs, consumer accessories that exchange data via USB OTG, and battery-powered IoT edge nodes where the XLP sleep modes extend operating life. Designers choose this part when USB connectivity is mandatory but the BOM cost and complexity of an ARM Cortex-M part is not justified. When designing with this device, verify the USB bus-power rail current budget and ensure VBUS detection is correctly implemented for self-powered vs bus-powered topologies. Decouple VDD/VUSB with 100nF + 4.7uF ceramics placed close to the pins; the on-chip PLL requires a clean analog supply. Use the Microchip MPLAB X IDE and the free MPLAB Code Configurator (MCC) plugin to generate peripheral drivers and USB stacks quickly. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Angebot Kontakt

PIC24FJ32GU205T-I/M4

PIC24FJ32GU205T-I/M4 - 16-bit USB MCU 32KB Flash | Microchip

The Microchip Technology PIC24FJ32GU205T-I/M4 is a 16-bit microcontroller from the PIC24F 'GP2/GU2' family featuring a 32 MHz CPU (16 MIPS), 32 KB of ECC Flash program memory, 8 KB of RAM, and integrated Full-Speed USB 2.0 Host/Device/OTG support, all housed in a 48-pin UQFN 6x6 mm package. This tape-and-reel packaged variant operates across an industrial temperature range of -40C to +85C, making it suitable for embedded designs that demand reliable USB connectivity in compact form factors. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and programmable peripherals. The PIC24F family is a 16-bit modified Harvard architecture line from Microchip that targets low-power and USB-enabled applications, sitting between 8-bit PIC MCUs and 32-bit ARM Cortex parts in the broader MCU taxonomy: MCU -> 16-bit MCU -> PIC24F family -> PIC24FJ USB sub-family -> power management and connectivity IC. Key features of this part include 32 KB Flash (11K x 24 words) with Error-Correcting Code (ECC) for improved reliability, hardware USB 2.0 Full-Speed transceiver, Microchip's proprietary eXtreme Low Power (XLP) technology with sleep currents down to a few hundred nanoamps while retaining the complete SRAM and peripheral state, and a rich set of Core Independent Peripherals (CIPs) such as CLC, MCCP, and configurable logic that offload tasks from the CPU. The 48-pin UQFN package with 0.4 mm pitch enables compact PCB layouts while still exposing ample GPIO for sensor and HMI integration. Typical applications include USB peripherals (HID, CDC, MSD class devices), battery-powered IoT sensor nodes leveraging XLP sleep modes, industrial data loggers with USB mass-storage download, low-cost medical USB diagnostic accessories, and consumer products that require both USB device charging emulation and host capability for firmware updates. The integrated USB PHY eliminates external transceiver components, reducing BOM cost and PCB area. When designing with this MCU, ensure the USB DP/DM traces are 90-ohm differential, length-matched, and routed over a continuous ground plane; decoupling capacitors must be placed adjacent to each VDD/VSS pair.

Angebot Kontakt

PIC24FJ32MC101-E/SO

PIC24FJ32MC101-E/SO - 16-bit 16 MIPS 32KB Flash MCU | Microchip

The Microchip PIC24FJ32MC101-E/SO is a 16-bit microcontroller from the PIC24F motor-control family that runs at 16 MIPS and integrates 32 KB (11K x 24) of Flash, 2 KB of RAM, and a 20-pin SOIC wide-body package for surface-mount motor drive boards. The -E suffix denotes the extended industrial temperature grade (-40C to +125C), and the /SO designator maps to a 7.50 mm body width SOIC-20 footprint. A 16-bit MCU (microcontroller unit) is a single-chip computer that combines a 16-bit CPU core, on-chip Flash program store, SRAM data memory, and a rich set of digital and analog peripherals. Within Microchip's taxonomy, PIC24F devices sit between 8-bit PIC16/PIC18 parts and the higher-performance dsPIC33/PIC32 families, and the PIC24FJ32MC101/102 sub-family is specifically aimed at ultra-low-cost motor-control applications, adding Motor Control PWM (MCPWM) and the Configurable Logic Cell (CTMU) for touch and timing functions. Key features include 16 MIPS performance from a 32 MHz internal oscillator, 6-channel MCPWM with independent time bases for sensorless BLDC or brushed DC drives, a 10-bit 1.1 Msps Analog-to-Digital Converter with up to 9 input channels, Peripheral Pin Select (PPS) for flexible I/O mapping, and 5V-tolerant I/O for mixed-signal boards. The 32 KB Flash stores both application code and bootloader image, while the 2 KB RAM supports small TCP/IP stacks, sensor-fusion buffers, or GUI command queues. The integrated Charge Time Measurement Unit (CTMU) enables capacitive touch, line-voltage zero-cross detection, and basic flow measurement. Typical applications include ceiling-fan and pump motor controllers, low-power HVAC blower drives, e-bike and small-EV pedal-assist control, white-goods BLDC modules, and USB-powered sensor hubs where the 5V-tolerant pins simplify interfacing to legacy 5V peripherals. The wide 20-SOIC body keeps the part friendly for hand-rework, while the PPS-remappable peripherals let designers shrink the PCB by routing UART, SPI, or PWM to whichever physical pins are left over. When designing with this device, plan for the 5V-tolerant digital I/O requirement and remember that the 10-bit ADC reference is shared with the I/O supply. A 100 nF decoupling capacitor within 5 mm of VDD is recommended, and an external 32.768 kHz crystal plus the RTCC peripheral support real-time-clock functionality on battery-backed designs. This page consolidates distributor pricing, drop-in alternatives from Microchip's PIC24F family, and practical design guidance that goes beyond the device datasheet PDF, helping engineers select between PIC24F MC variants without re-reading a 300-page family reference manual.

Angebot Kontakt

PIC24FJ32MC101-I/P

PIC24FJ32MC101-I/P - 16-bit 32KB Flash Motor Control MCU | Microchip

The Microchip PIC24FJ32MC101-I/P is a 16-bit microcontroller from the PIC24F family, featuring 32KB of Flash program memory (11K x 24 words), 2KB of RAM, and a maximum CPU speed of 16 MIPS, all integrated into a 20-pin PDIP through-hole package. The device is purpose-built for low-cost, high-performance motor control applications and includes dedicated Motor Control PWM (MCPWM) peripherals, a Charge Time Measurement Unit (CTMU), and Peripheral Pin Select (PPS) for flexible signal routing. What is a 16-bit motor control MCU? A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals. A 16-bit MCU uses a 16-bit data path, which doubles the throughput of an 8-bit MCU while remaining cheaper and lower-power than 32-bit ARM Cortex devices. Motor-control MCUs add specialized PWM channels, fast ADCs, and quadrature encoder interfaces to drive brushed, brushless DC, or stepper motors without external logic. The PIC24FJ32MC101 sits in the hierarchy: microcontroller -> embedded MCU -> 16-bit MCU -> motor-control MCU -> PIC24F family -> PIC24FJ32MC101 sub-family. Key features include up to 16 MIPS performance at 32 MHz, 6 channels of 10-bit ADC at 500 ksps, 5 timers, 3 analog comparators, 3 MCPWM channels with complementary outputs and dead-band control, plus standard communication peripherals including I2C, SPI, and UART. The CTMU enables touch sensing and precise time-based measurements such as capacitive sensing or simple gesture detection, while PPS allows digital peripheral pins to be remapped across most I/O pads, simplifying PCB layout. Technically, the PIC24FJ32MC101 uses a Modified Harvard architecture with a 16-bit wide data path and 24-bit wide instructions, supported by a hardware multiplier for fast DSP-style operations. The wide instruction word accelerates compiled C code, and the 16-channel peripheral event system reduces CPU overhead. The CTMU block provides a constant-current source that, combined with ADC sampling, yields high-resolution timing for ultrasonic distance, capacitive touch, and time-of-flight applications. Typical applications include BLDC and PMSM motor controllers, small DC and stepper motor drives, fan and pump controllers, RC servo and robotic actuators, low-cost position-control systems with quadrature encoder feedback, LED lighting drivers with constant-current regulation, and capacitive touch user interfaces. The wide operating range of 3.0V to 3.6V and industrial -40C to +85C temperature grade make it suitable for both consumer appliances and industrial equipment. When designing with this part, place a 10uF bulk capacitor plus a 0.1uF decoupling capacitor adjacent to the VDD pin, keep the analog VDD/VSS traces short, and configure PPS carefully to avoid unintended peripheral pin collisions on the 20-pin package. This page synthesizes distributor pricing, drop-in PIC24F family alternatives, and PCB design guidance not found on the standalone Microchip datasheet, giving engineers a single reference for selection, procurement, and layout.

Angebot Kontakt

PIC24FJ32MC101-I/SO

PIC24FJ32MC101-I/SO - 16-bit 32KB Flash MCU 20-SOIC | Microchip

The Microchip Technology PIC24FJ32MC101-I/SO is a 16-bit microcontroller from the PIC24FJ32MC family, featuring 32KB of FLASH program memory and 2KB of RAM, packaged in a 20-pin SOIC (SO) wide-body 7.50mm package. It executes instructions at 16 MIPS throughput via a modified Harvard RISC architecture with an internal 32 MHz oscillator, while operating from a 3.0V to 3.6V single supply across an industrial -40C to +125C temperature range. A PIC24F microcontroller is a 16-bit reduced instruction set computing (RISC) MCU in the broader PIC24F/PIC24H family of dsPIC-style microcontrollers from Microchip Technology. Within the wider product hierarchy, PIC24F belongs to the 16-bit microcontroller class -> microcontroller -> embedded controller -> semiconductor IC. The "24F" prefix denotes the FLASH-based, low-power variant optimised for cost-sensitive motor control and general-purpose applications, while the "MC" suffix in this part designates the Motor Control sub-family with hardware MCPWM, CTMU, and PPS peripherals. Key features include a 16-channel 10-bit ADC with 500 ksps conversion rate, two UART modules, one SPI port, one I2C bus, five 16-bit timers, three analogue comparators, a Charge Time Measurement Unit (CTMU), and a Peripheral Pin Select (PPS) system that remaps digital peripherals to a wide range of I/O pins. The device integrates a 6-channel MCPWM (Motor Control PWM) module and supports up to 15 I/O pins in this 20-pin package. It also includes a configurable Watchdog Timer, brown-out reset, and an in-circuit serial programming (ICSP) interface. Architecturally the PIC24FJ32MC101 combines a 16-bit datapath with a single-cycle ALU and hardware multiply/divide, allowing deterministic interrupt response and C-compiler efficient code. The CTMU enables capacitive touch sensing and precise time measurement, while the PPS router eliminates the fixed peripheral-to-pin mapping constraint of older PIC16/PIC18 parts. An integrated 8 MHz internal RC oscillator with PLL multiplication to 32 MHz removes the need for external crystals in many designs, reducing BOM cost. Typical applications include BLDC and PMSM motor drives (low-voltage fan, pump, appliance control), small appliance and white goods motor control boards, LED lighting controllers, sensor interfaces (using CTMU for touch/proximity), and general-purpose 3.3V embedded control. Automotive infotainment auxiliary modules and consumer robotics also benefit from the wide supply and temperature ranges. The combination of small footprint, motor-control peripherals, and on-chip CTMU makes this part a frequent choice where designers need compact, single-chip motion control. Designers should note that the 3.0V to 3.6V supply range is narrow - it is incompatible with 5V systems without level shifting. Decouple VDD/VSS with at least a 100 nF ceramic capacitor placed within 5 mm of the supply pins. The analog VDD/VSS pair requires a separate clean analog ground plane, and the ADC conversion accuracy is sensitive to high-frequency digital switching near AVSS - keep switching nodes and the MCU grounds segregated to one point. This page synthesises real-time distributor pricing, verified drop-in alternatives from the same PIC24FJ32MC family, and practical design notes that go beyond the manufacturer datasheet to help engineers shorten time-to-prototype.

Angebot Kontakt

PIC24FJ32MC101T-E/SO

PIC24FJ32MC101T-E/SO - 16-bit Motor Control MCU, 20-SOIC | Microchip

The Microchip Technology PIC24FJ32MC101T-E/SO is a 16-bit microcontroller from the PIC24F motor-control family, featuring 32 KB Flash, 2 KB RAM, and an integrated Motor Control PWM (MCPWM) peripheral with three PWM channels, in a 20-pin SOIC package rated for the automotive E temperature grade (-40C to +125C). This device belongs to the 16-bit microcontroller category (MCU -> microcontroller -> embedded processor -> semiconductor). A 16-bit MCU integrates a CPU core, program memory (Flash), data memory (SRAM), and configurable peripherals on a single die; PIC24F devices use a modified Harvard architecture running the PIC instruction set at up to 16 MIPS for motor-control tasks such as BLDC commutation and PFC. Key features include 32 KB of Flash program memory (11K x 24 words), 2 KB of SRAM, three 16-bit MCPWM channels with complementary or independent outputs, three on-chip analog comparators, a Charge Time Measurement Unit (CTMU) for capacitive touch, Peripheral Pin Select (PPS) for flexible I/O mapping, and a Real-Time Clock Calendar (RTCC) module. The 16 MIPS modified-Harvard core delivers deterministic interrupt latency that is critical for field-oriented control loops running at tens of kHz. PPS removes the fixed-pin peripheral constraint of older PIC16/PIC18 parts, and the CTMU adds cost-effective capacitive-touch sensing. Typical applications include low-cost BLDC and PMSM motor drives (fans, pumps, small appliances), DC-DC converter control loops, LED lighting controllers, capacitive-touch user interfaces, and automotive body modules that operate over the extended temperature range. When designing with this device, plan I/O assignments around the PPS mapping (each peripheral function can be assigned to one of several pins), and reserve one timer for the PWM time base. Note that the SO package has fewer I/O than the QFN variant; pin-limited applications should consider PIC24FJ32MC102. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes not found in the manufacturer datasheet alone, enabling faster component selection for motor-control and embedded designs.

Angebot Kontakt

PIC24FJ32MC102-E/ML

PIC24FJ32MC102-E/ML - 16-Bit 32KB Flash Motor Control MCU | Microchip

The Microchip Technology PIC24FJ32MC102-E/ML is a 16-bit PIC24F microcontroller from the PIC24FJ32MC1xx motor-control family, featuring 32KB of Flash program memory, 2KB of RAM, and 16 MIPS performance in a 28-pin QFN (6x6) package. It integrates dedicated motor-control peripherals including three Motor Control PWMs (MCPWM), three analog comparators, a Charge Time Measurement Unit (CTMU), Real-Time Clock/Calendar (RTCC), and Peripheral Pin Select (PPS) for flexible signal routing. A 16-bit microcontroller (MCU) is a microprocessor that processes instructions 16 bits at a time, sitting in the hierarchy between 8-bit MCUs (cost-optimized, simpler control) and 32-bit MCUs (higher performance, more complex applications). Within the broader taxonomy, the PIC24F belongs to the microcontrollers -> embedded controllers -> semiconductor category. The PIC24FJ32MC102 targets cost-sensitive BLDC, PMSM, and stepper motor control applications where the larger 16-bit data path simplifies fractional arithmetic for control loops, and the integrated motor-control peripherals eliminate the need for an external gate driver controller for small motors. Key features include 21 general-purpose I/O lines, three 16-bit timers, two UART, one SPI, one I2C, a 10-bit ADC with up to 9 channels and 500 ksps conversion rate, and an internal 8 MHz oscillator with PLL support up to 32 MHz. The CTMU enables capacitive touch sensing and precise time-of-flight measurements, while the RTCC supports calendar functions with backup power from a separate VBAT pin. The PPS module routes most digital peripherals to user-selected pins, simplifying PCB layout and BOM. Typical applications include ceiling fans, RC servo drives, small pumps, white-goods motor controllers, and low-cost BLDC/PMSM sensorless or sensored drives. Industrial uses extend to small appliance inverters and toys. Designers choose the PIC24FJ32MC102 for compact 28-pin motor-control designs that require deterministic PWM, fault protection via comparators, and field-proven PIC24F firmware libraries (motor control, USB, graphics). It is pin-compatible with the PIC24FJ16MC102 (half the Flash) and the PIC24FJ32MC104 (32-pin variants with more peripherals).

Angebot Kontakt

PIC24FJ32MC102-E/SO

PIC24FJ32MC102-E/SO - 16-bit 16MIPS 32KB Flash Motor Control MCU | Microchip

The Microchip Technology PIC24FJ32MC102-E/SO is a 16-bit PIC24F microcontroller from the motor control family, executing up to 16 MIPS and integrating 32 KB of Flash program memory, 2 KB of RAM, and 1 KB of EEPROM in a 28-pin SOIC package. It is AEC-Q100 qualified for automotive environments and features dedicated motor-control peripherals including MCPWM (Motor Control PWM), CTMU (Charge Time Measurement Unit), and Peripheral Pin Select (PPS), all of which enable compact, low-pin-count BLDC, PMSM, and stepper drive designs without external logic. A 16-bit microcontroller (MCU) is an embedded processor whose internal datapath, registers, and arithmetic logic unit operate on 16-bit words. Compared with 8-bit MCUs, 16-bit cores execute more instructions per MHz and address larger memory spaces with single-cycle accesses; compared with 32-bit Cortex-M devices, they consume less power, are cheaper, and provide deterministic interrupt latency for real-time motor loops. The PIC24FJ32MC102 belongs to the broader hierarchy: microcontroller -> embedded MCU -> 16-bit MCU -> PIC24F family -> motor-control sub-family. Key features include a wide operating voltage range of 3.0 V to 5.5 V (typical 3.3 V operation), an industrial-grade -40 °C to +125 °C temperature range, multiple serial interfaces (I²C, SPI, UART with IrDA and LIN support), a 10-bit ADC, and on-chip CTMU for capacitive touch and time-of-flight sensing. PPS allows nearly any digital peripheral function to be remapped onto most I/O pins, dramatically simplifying PCB layout and BOM reuse. Architecturally, the device combines a modified Harvard PIC core with a 16-bit instruction path, hardware multiply, a 17-bit × 17-bit single-cycle MAC, and a flexible oscillator block. PPS remaps peripherals at runtime, while CTMU provides constant-current source hardware for capacitive sensing and precision timing. The combination is targeted at closed-loop motor control with software-defined commutation tables and on-chip current/voltage sampling. Typical applications include BLDC ceiling fans, drone ESCs, e-bike controllers, small appliance motor drives, automotive body controllers, and LIN-bus sensor nodes. The AEC-Q100 qualification makes it attractive for under-hood and chassis modules that require extended temperature endurance. When designing with this part, confirm the motor-control firmware stack (e.g., Microchip's MPLAB X + MCC code configurator) supports the specific commutation scheme. Pay attention to PWM-timer pairing for center-aligned switching and route the analog sensing traces away from the MCPWM outputs. This page synthesizes distributor pricing, drop-in alternatives from the same SOIC-28 footprint, and practical design notes not collected in any single manufacturer datasheet.

Angebot Kontakt

PIC24FJ32MC102-E/SS

PIC24FJ32MC102-E/SS - 16-bit 32KB Flash Motor Control MCU | Microchip

The Microchip PIC24FJ32MC102-E/SS is a 16-bit microcontroller from the PIC24F motor-control family, featuring 32 KB of Flash program memory, 2 KB of SRAM, and a 16 MIPS PIC24 CPU core, housed in a 28-pin SSOP (5.30 mm) package with an extended -40C to +125C operating temperature grade. The device integrates three 6-pin MCPWM (Motor Control PWM) channels, three analog comparators, a CTMU (Charge Time Measurement Unit) for capacitive touch or general time-of-flight measurement, an RTCC, and Peripheral Pin Select (PPS) for flexible signal routing. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory, data memory, and on-chip peripherals into a single chip. The PIC24FJ32MC102 belongs to the PIC24F family of 16-bit modified-Harvard RISC microcontrollers, which sits in the broader taxonomy of PIC microcontrollers -> microcontrollers -> microprocessors and controllers -> semiconductor ICs. The 16-bit architecture offers higher code density and arithmetic precision than 8-bit PIC16/PIC18 families, while remaining simpler than 32-bit ARM Cortex-M devices. Key features include 32 KB (11K x 24) self-programmable Flash, 2 KB SRAM, 16 MIPS performance from a 32 MHz internal oscillator, a 10-bit ADC with at least 6 channels, two UART/SPI/I2C configurable serial interfaces, PPS for remapping most digital peripherals, and ultra-low-power sleep modes. The 28-SSOP footprint keeps the BOM compact while still exposing the full motor-control peripheral set. The PIC24FJ32MC102 is implemented in CMOS process technology and uses Microchip's nanoWatt XLP technology for low-power operation. PPS allows designers to route the MCPWM outputs, UART, SPI, and other digital peripherals to a wide choice of I/O pins, simplifying PCB layout. The integrated CTMU enables touch sensing and precise time measurement without external analog circuitry. Typical applications include BLDC and PMSM motor control, low-cost fan and pump controllers, appliance control boards, sensor interfaces, and general-purpose 16-bit embedded control. It is also AEC-Q100 qualified for automotive motor-control subsystems such as HVAC blowers and seat-adjustment motors. When designing with this part, pay attention to VDD decoupling (place a 0.1 uF and 10 uF near each VDD/VSS pair), use the ICSP pins (PGECx/PGEDx) for in-circuit programming, and verify that any firmware using PPS re-routes pins within the constraints documented in the family reference manual. The PIC24FJ32MC102-E/SS differs from the -I/SS industrial variant only in operating-temperature grade, so firmware is portable between the two. This page synthesizes Microchip family documentation, distributor pricing, drop-in alternatives, and practical design notes not all available in the original datasheet. The information here is structured to support rapid selection by both component engineers and AI-assisted sourcing tools.

Angebot Kontakt

PIC24FJ32MC102-E/TL

PIC24FJ32MC102-E/TL - 16-bit 32KB Flash Motor Control MCU | Microchip

The Microchip Technology PIC24FJ32MC102-E/TL is a 16-bit PIC microcontroller from the PIC24F motor-control family, delivering 16 MIPS performance with 32 KB Flash program memory and 2 KB RAM in a 36-pin VTLA surface-mount package. The -E suffix indicates the extended -40 °C to +125 °C automotive temperature grade, while the /TL suffix denotes the VTLA-36 tape-and-reel package option. Core peripherals include an 8-channel 10-bit ADC, Motor Control PWMs (MCPWM), Peripheral Pin Select (PPS), and the on-chip Charge Time Measurement Unit (CTMU) for capacitive touch and precise time-domain measurements. A 16-bit microcontroller (MCU) is a programmable embedded processor that balances 32-bit class arithmetic performance with the cost and code density of a 16-bit instruction set. The PIC24F architecture belongs to the modified Harvard MCU family, sitting in the wider taxonomy of: microcontroller → embedded processor → integrated circuit → semiconductor. Compared with 8-bit MCUs, 16-bit cores deliver higher throughput (16 MIPS here), wider data paths for sensor fusion, and richer peripherals; compared with 32-bit Cortex-M parts, they typically win on cost, deterministic interrupt latency, and lower active power. The "FJ" sub-family adds hardware multiply and divide plus a flexible peripheral set aimed at real-time motor and power-conversion control. Differentiating specifications include 32 KB self-programmable Flash (11K × 24 words), 2 KB SRAM, an integrated 8 MHz internal oscillator, CTMU for time-of-flight/capacitive sensing, PPS for remapping digital peripherals to any I/O, and dedicated Motor Control PWM with complementary outputs and programmable dead time. The wide VIN (2.0 V–3.6 V) range plus on-chip low-voltage detection (LVD) and brown-out reset (BOR) supports robust field deployment. Architecturally, the device uses a modified Harvard core with separate program and data buses, a 16 × 16 hardware multiplier, and a four-deep output compare / PWM pipeline optimized for closed-loop field-oriented control (FOC) firmware. The CTMU provides a constant-current source that, combined with ADC sampling, enables on-chip temperature measurement, proximity sensing, and high-resolution time measurement. Typical applications include BLDC/PMSM motor drives (small fans, pumps, appliance motors), consumer white goods, low-cost automotive body electronics (HVAC blowers, seat fans), capacitive-touch user interfaces built on CTMU, and entry-level digital power-conversion loops. Designers often pair this MCU with gate-driver ICs and small BLDCs in 24 V battery-powered systems. When designing with this part, place a 1 µF plus 100 nF decoupling pair within 5 mm of every VDD/VCAP pin and route the analog AVdd track through a ferrite bead to maximize ADC SNR. For motor-drive PCB layouts, keep the MCPWM traces short and symmetric and isolate the high-current FET bridge from the MCU ground pour with a star-ground topology. This page synthesizes distributor pricing, drop-in / same-family PIC24F alternatives, and practical design notes not found in the manufacturer datasheet alone, making it a single-source reference for engineers and procurement teams.

Angebot Kontakt

PIC24FJ32MC102-I/SO

PIC24FJ32MC102-I/SO - 16-bit 32KB Flash Motor Control MCU | Microchip

The Microchip PIC24FJ32MC102-I/SO is a 16-bit microcontroller from the PIC24F motor-control family, delivering 16 MIPS performance and integrating 32 KB Flash with 2 KB RAM in a 28-pin SOIC package. It is designed as an ultra-low-cost, high-performance 16-bit MCU featuring CTMU (Charge Time Measurement Unit), MCPWM (Motor Control PWM), PPS (Peripheral Pin Select) and other advanced peripherals with low pin count and small footprint options. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and peripheral subsystems such as timers, ADC, communication controllers and PWM blocks. In the broader taxonomy, the PIC24FJ32MC102 sits as a 16-bit MCU -> 16-bit microcontroller -> microcontroller -> embedded processor -> semiconductor. Motor-control variants specifically target the precise PWM generation and analog sampling required for BLDC, PMSM, and DC brushed/brushless drives. Key features include 16 MIPS CPU throughput at 32 MHz, dedicated motor-control PWMs, an integrated 10-bit ADC, CTMU for touch or capacitive sensing, and PPS for flexible peripheral-to-pin mapping. The 32 KB self-programmable Flash and 2 KB RAM support small to medium control loops, while the 28-pin SOIC provides a generous pin budget for analog, communication, and PWM signals without resorting to smaller QFN footprints. Architecturally, the PIC24FJ32MC102 uses Microchip's modified Harvard architecture with a 16-bit data path, hardware multiplier/divider, and a 16-element working register array. The motor-control peripherals operate independently of the CPU, freeing MIPS for state-machine or communications tasks. PPS allows remapping of digital peripherals, reducing pin-out constraints on compact motor boards. Typical applications include low-voltage BLDC/PMSM motors, sensorless and Hall-sensor fan control, drone ESCs, e-bike and small EV traction control, robotic joint drives, white-goods motor control (washing-machine direct-drive pumps), and low-cost industrial servo drives. Industrial factory automation and HVAC actuators also use this family for compact closed-loop current/voltage regulation. When designing with this MCU, ensure the VDD/AVDD pair is properly decoupled and the 32 kHz secondary oscillator is configured for low-power modes. The MCPWM module's fault inputs and dead-time generators should be validated against the motor driver's safe-commutation requirements. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet, enabling faster sourcing and PCB layout reuse decisions.

Angebot Kontakt

PIC24FJ32MC102-I/SP

PIC24FJ32MC102-I/SP - 16-bit 16 MIPS 32KB Flash MCU | Microchip

The Microchip Technology PIC24FJ32MC102-I/SP is a 16-bit microcontroller from the PIC24F motor-control family, delivering 16 MIPS performance at up to 32 MHz core speed with 32 KB of Flash program memory and 2 KB of RAM, housed in a 28-pin SPDIP (SP) through-hole package. It integrates dedicated motor-control peripherals including a 6-channel Motor Control PWM (MCPWM), a 16-bit timer/counter, and a Charge Time Measurement Unit (CTMU) for capacitive touch and time-of-flight sensing, making it a cost-optimized solution for BLDC, PMSM and stepper control. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data memory, and programmable peripherals. Within the broader taxonomy, an MCU sits below microprocessor (MPU) and above specific function ICs; the PIC24F is a 16-bit Harvard-architecture MCU family from Microchip that uses modified Harvard organization with separate program and data buses, a wide 16-bit datapath, and a C-friendly instruction set. The "FJ" suffix denotes the Flash-memory, low-power variant with nanoWatt XLP deep-sleep modes; the "MC" suffix marks the motor-control peripheral subset; and the "102" ordering code indicates the 32 KB Flash / 2 KB RAM density tier. Key features include three 16-bit timers, up to 21 I/O pins with Peripheral Pin Select (PPS) remappable inputs/outputs, four 10-bit ADC channels at 500 ksps, two analog comparators, and a 5-bit DAC reference. Communication interfaces include I2C, SPI, and UART with LIN support. The device operates from 2.0 V to 3.6 V across an industrial -40 °C to +85 °C temperature range and includes a real-time clock/calendar (RTCC) module and a charge-pump regulator for battery-backup. Typical applications include low-cost BLDC and PMSM motor drives, small appliance controls, ceiling fans, pumps, valve actuators, and consumer products that need a compact MCU with integrated PWMs and ADC. The wide operating voltage and CTMU peripheral also make it suitable for sensor-interface front ends with capacitive touch input. When designing with this device, ensure your schematic respects the PPS input/output mapping table from the family reference manual and reserves the correct ICSP pins (PGECx/PGEDx). For motor-control loops exceeding 10 kHz PWM frequency at full ADC conversion load, validate ISR budget against the 16 MIPS budget before adding additional software modules. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, organized for engineers comparing motor-control MCU options.

Angebot Kontakt

Unterkategorien

Produkte (32837)

PIC24FJ32GU202-E/SO - 16-bit 32KB ECC Flash USB MCU | Microchip

PIC24FJ32GU202-E/SS - 16-Bit 32MHz USB MCU, 32KB Flash | Microchip

PIC24FJ32GU202-I/ML - 16-bit USB MCU 32KB Flash 28-QFN | Microchip

PIC24FJ32GU202-I/MV - 32KB Flash USB MCU | Microchip 28-UQFN

PIC24FJ32GU202T-I/ML - 32KB Flash, USB, 28-QFN MCU | Microchip

PIC24FJ32GU202T-I/SO - 16-bit MCU 32KB Flash USB XLP | Microchip

PIC24FJ32GU202T-I/SS - 16-bit 32MHz 32KB USB MCU | Microchip

PIC24FJ32GU203-E/M5 - 16-bit USB MCU, 32KB Flash | Microchip

PIC24FJ32GU203-I/M5 - 32KB Flash 16-bit USB MCU | Microchip

PIC24FJ32GU203T-I/M5 - 32KB USB MCU, 36-UQFN | Microchip

PIC24FJ32GU205-E/M4 - 32KB USB XLP MCU 16-bit | Microchip

PIC24FJ32GU205-E/PT - 32KB Flash USB MCU 48-TQFP E-temp | Microchip

PIC24FJ32GU205-I/PT - 16-bit 32MHz 32KB Flash USB MCU TQFP-48 | Microchip

PIC24FJ32GU205T-I/M4 - 16-bit USB MCU 32KB Flash | Microchip

PIC24FJ32MC101-E/SO - 16-bit 16 MIPS 32KB Flash MCU | Microchip

PIC24FJ32MC101-I/P - 16-bit 32KB Flash Motor Control MCU | Microchip

PIC24FJ32MC101-I/SO - 16-bit 32KB Flash MCU 20-SOIC | Microchip

PIC24FJ32MC101T-E/SO - 16-bit Motor Control MCU, 20-SOIC | Microchip

PIC24FJ32MC102-E/ML - 16-Bit 32KB Flash Motor Control MCU | Microchip

PIC24FJ32MC102-E/SO - 16-bit 16MIPS 32KB Flash Motor Control MCU | Microchip

PIC24FJ32MC102-E/SS - 16-bit 32KB Flash Motor Control MCU | Microchip

PIC24FJ32MC102-E/TL - 16-bit 32KB Flash Motor Control MCU | Microchip

PIC24FJ32MC102-I/SO - 16-bit 32KB Flash Motor Control MCU | Microchip

PIC24FJ32MC102-I/SP - 16-bit 16 MIPS 32KB Flash MCU | Microchip