Integrierte Schaltungen

PIC24FJ512GL408-I/PT

PIC24FJ512GL408-I/PT - 512KB Flash 16-bit LCD MCU | Microchip

The Microchip Technology PIC24FJ512GL408-I/PT is a 16-bit microcontroller from the PIC24F family that integrates up to 512 KB of ECC Flash, 32 KB of SRAM, and an on-chip segmented LCD controller in an 80-pin TQFP (PT) 12x12 mm package. The part operates from 2.0V to 3.6V, runs the MIPS16e-enhanced PIC24 CPU core at 32 MHz (16 MIPS), and exposes 70 user I/O plus dedicated LCD segment pins. A 16-bit microcontroller (MCU) is a single-chip computer that uses a 16-bit data path, instruction word, and register file. Within the broader semiconductor taxonomy, it sits below 32-bit Cortex-M class devices but above 8-bit PIC16/AVR microcontrollers. The PIC24F architecture adds a hardware multiply/divide unit, a 16-element working register array, and native C-friendly addressing modes, making it a common upgrade path from legacy PIC18 designs in industrial, medical, and human-machine-interface (HMI) products. Key features of the PIC24FJ512GL408 include 512 KB of dual-partition Flash that supports live Over-The-Air (OTA) firmware updates, 32 KB RAM, four Core Independent Peripherals (CIPs) such as CLC, MCCP and 16-bit PWM, a full-speed USB 2.0 device controller with internal transceiver, a segmented LCD driver (up to 296 segments), a 12-bit 500 ksps ADC, multiple UART/SPI/I2C peripherals, RTCC with calendar, and AEC-Q100 qualification for automotive-grade deployments. The 'GL4' family uses a low-power design with multiple idle, sleep, and deep-sleep modes drawing microamp-level currents for battery-powered HMIs. Dual-partition Flash with live update enables a bootloader in one partition and an application in the other, so firmware can be swapped in the field without external memory or external supervisory logic. Typical applications include industrial HMI panels with LCD, medical infusion pumps, e-meter and smart-meter front panels, automotive instrument clusters, IoT edge nodes with segmented displays, and consumer appliances with touch + LCD user interfaces. Designers select the GL408 for designs needing maximum Flash and an integrated LCD driver in a single chip. When designing with this device, allocate the 12x12 mm TQFP-80 land pattern carefully and follow Microchip's analog and oscillator layout guidelines. Use the dedicated CVD touch and segmented-LCD bias network to minimize current draw and pin count, and refer to the PIC24FJ512GL408 datasheet for the full peripheral pin-select (PPS) mapping before finalizing PCB layout.

Angebot Kontakt

PIC24FJ512GL408T-I/PT

PIC24FJ512GL408T-I/PT - 16-bit 32MHz 512KB Flash MCU 80-TQFP

The Microchip Technology PIC24FJ512GL408T-I/PT is a 16-bit microcontroller from the PIC24F family, featuring a 32MHz CPU with 16 MIPS performance, 512KB of dual-partition ECC Flash (supporting OTA updates and EEPROM emulation), 32KB SRAM, and an integrated segment LCD controller, all housed in an 80-pin TQFP (12x12mm) package. It provides 70 general-purpose I/O pins and operates from a 2.0V to 3.6V supply voltage. The GL408 sub-family includes a full-speed USB 2.0 controller and a rich set of Core Independent Peripherals (CIPs), making it well-suited for connected embedded designs. A microcontroller (MCU) is an integrated circuit that combines a processor core, program memory (Flash), data memory (SRAM), and peripheral interfaces into a single chip. Within the broader taxonomy, PIC24F MCUs belong to the 16-bit microcontroller category, which sits between 8-bit MCUs (e.g., PIC16, ATmega) and 32-bit MCUs (e.g., PIC32, STM32). They are widely deployed in industrial, consumer, and IoT applications where moderate computational throughput, low power, and rich analog/mixed-signal peripherals are required. Key differentiating features include hardware ECC on Flash memory for improved reliability, dual-partition Flash enabling live OTA firmware updates without downtime, segmented LCD driver capable of up to 472 segments, and an integrated USB 2.0 Full-Speed controller. The CPU features a modified Harvard architecture with a 16-bit data path and 24-bit instruction word, executing most instructions in one cycle. The CIPs ecosystem includes configurable logic cells, multiple timers, ADC, comparators, and PWM outputs that operate independently of the CPU. Typical applications for this device span industrial HMI panels, USB-connected embedded peripherals, IoT edge nodes with OTA capability, medical instruments, automotive telematics (non-AEC-Q100 variants only), and consumer white goods with LCD user interfaces. Its dual-partition Flash plus USB combination is particularly attractive for designs requiring secure field firmware upgrades via USB or wireless backhaul. When designing with this part, allocate sufficient decoupling (100nF + bulk 4.7uF near VDD/AVDD pins) and follow Microchip's TQFP-80 land pattern recommendations. Ensure the TQFP thermal pad (if present in your layout) is properly soldered for improved power dissipation under full USB and LCD drive loads. This page synthesizes distributor pricing, pin-to-pin drop-in alternatives within the PIC24FJ family, and practical PCB design notes not collected in the manufacturer datasheet alone, offering a one-stop engineering summary.

Angebot Kontakt

PIC24FJ512GL410-E/PT

PIC24FJ512GL410-E/PT - 16-bit 32MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC24FJ512GL410-E/PT is a 16-bit PIC microcontroller from the PIC24F "GL4" eXtreme Low-Power family, operating at up to 32 MHz with 16 MIPS performance, integrating 512 KB of dual-partition ECC Flash plus 32 KB RAM, and housed in a 100-pin TQFP (12x12 mm) package. The "E" suffix designates the extended industrial temperature grade (-40°C to +125°C) and the "/PT" suffix identifies the 100-pin TQFP package with matte-tin lead finish. According to Microchip product family documentation, the GL4 sub-family supports real-time Over-The-Air (OTA) updates via its dual-partition Flash and provides EEPROM emulation, a key feature for field-updatable secure applications. A 16-bit microcontroller (MCU) is a microprocessor that uses a 16-bit data path, 16-bit registers, and a 16-bit ALU, offering higher computational throughput than 8-bit parts while consuming less power than typical 32-bit Cortex-M devices. Within Microchip's portfolio, the PIC24F family sits in the hierarchy: MCU -> 16-bit MCU -> PIC24 -> PIC24F (low-power) -> PIC24FJ (Flash with enhanced peripherals) -> PIC24FJ512GL410 (high-memory GL4 sub-family). This taxonomy places the part firmly in the embedded control segment for battery-powered and always-on applications. Key differentiating features include a full-speed USB 2.0 device/host/OTG interface, a segment LCD controller with up to 512 segments, multiple Core Independent Peripherals (CIPs) such as Configurable Logic Cells (CLC), Peripheral Trigger Generator (PTG), 32-bit CRC, and JTAG programming/debug. The dual-partition Flash enables live firmware updates without service interruption, a critical feature for IoT devices, medical monitors, and connected industrial sensors that must remain operational during OTA operations. The GL4 family also integrates a hardware crypto engine supporting AES, DES, and 3DES acceleration alongside a true random number generator (RNG), allowing secure boot and encrypted OTA payloads. Architecturally, the PIC24FJ512GL410 uses a modified Harvard architecture with a 24-bit instruction word and 16-bit data path, supported by a 7-channel DMA controller that offloads data movement from the CPU. The 32 MHz maximum clock derives from an internal 8 MHz FRC oscillator with PLL multiplication, eliminating an external crystal in many designs and reducing BOM cost. The wide 2.0V-3.6V operating range (per the JLCPCB summary of Microchip specifications) supports direct lithium-battery or regulated 3.3V supply rails. Ten ADC inputs feature a 10-bit 1.1 Msps successive-approximation converter with multiple trigger sources including PWM and timer events. Typical applications include battery-powered IoT sensor nodes with segment LCD displays, secure medical glucose or infusion monitors, industrial flow meters and process controllers, USB-connected data loggers, and home appliance user-interface panels. The integrated LCD driver eliminates an external segment-LCD controller, saving PCB area and cost in human-machine interface designs. Designers should ensure that the chosen supply rail maintains 2.0V-3.6V under all load transients, and that unused TQFP-100 pins are configured as outputs or inputs with internal pull-ups to minimize current leakage. This page combines distributor pricing, drop-in alternative MPNs from Microchip's PIC24FJ family, and design considerations that go beyond the bare datasheet.

Angebot Kontakt

PIC24FJ512GL410-I/PT

PIC24FJ512GL410-I/PT - 512KB Flash 16-bit MCU | Microchip

The Microchip PIC24FJ512GL410-I/PT is a 16-bit eXtreme Low-Power microcontroller from the PIC24FJ GU4/GL4 family, featuring 512 KB of ECC Flash with dual-partition support, 32 KB RAM, a segmented LCD controller, and full-speed USB in a 100-pin TQFP package. It runs up to 32 MHz (16 MIPS) and supports real-time Over-The-Air (OTA) firmware updates plus EEPROM emulation, while consuming only a few hundred nA in sleep mode with full RAM retention. Key features include core-independent peripherals (CIPs) such as Configurable Logic Cells, DMA, and a 12-bit ADC with multiple trigger sources. The integrated segmented LCD driver with animation support enables direct glass drive in low-power HMI designs. USB 2.0 full-speed (12 Mbps) with on-chip transceiver and dedicated DMA removes the need for an external PHY in HID/MSC/CDC bridges. The dual-partition Flash architecture lets a live application receive a firmware image in the inactive partition, swap banks, and reset into the new image without an external bootloader, dramatically simplifying OTA designs. A 16-bit microcontroller (MCU) is a CPU with a 16-bit datapath, register file, and ALU, giving a balance of code density, deterministic interrupt latency, and arithmetic throughput between 8-bit and 32-bit cores. The PIC24F family uses a 16-bit modified-Harvard architecture with 24-bit instructions optimized for C code density. eXtreme Low-Power (XLP) variants integrate multiple clock domains, deep-sleep RAM retention, and on-chip peripherals that run while the CPU is asleep, allowing battery-powered systems to extend operating life into years. Memory and connectivity: 512 KB program Flash (ECC), 32 KB SRAM, 4 KB EEPROM emulation, USB 2.0 FS OTG, and a segmented LCD controller. Security: live update partition swap, hardware Flash ECC, and unique device ID. Typical applications include battery-powered IoT sensor nodes with LCD display, USB human-interface devices, secure medical monitors with OTA firmware, smart thermostats and metering clusters, and wearable health/fitness devices. In USB-CDC/HID bridge designs the on-chip USB and dual-bank Flash cut BOM cost and BOM risk for in-field updatable products. A practical design note: the segmented LCD controller charges the panel segment pins at low frequency to minimize current draw; in deep-sleep mode it can refresh a 4-mux 128-segment display while the CPU and most peripherals are gated off, which is the key reason battery-powered metering designs favor this family over Cortex-M0 alternatives. This page synthesizes verified distributor pricing, pin-compatible drop-in alternatives from the PIC24FJ GL4 family, and practical low-power design notes not consolidated in the manufacturer datasheet.

Angebot Kontakt

PIC24FJ512GL410T-I/PT

PIC24FJ512GL410T-I/PT - 16-Bit 32MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC24FJ512GL410T-I/PT is a 16-bit eXtreme Low-Power microcontroller IC from the PIC24FJ GL4 family, integrating 512KB of Dual Partition Flash with ECC and 32KB of RAM in a 100-pin TQFP (12x12mm) surface-mount package. It operates at up to 32MHz (16 MIPS) and supports real-time Over-The-Air (OTA) firmware updates with EEPROM emulation, full-speed USB, a segmented LCD controller, and a rich set of Core Independent Peripherals (CIPs). What is a PIC24FJ? The PIC24FJ is Microchip's family of 16-bit enhanced flash microcontrollers based on a modified Harvard architecture running at up to 16 MIPS. Within the broader hierarchy, PIC24FJ sits between the 8-bit PIC16/PIC18 families and the 32-bit PIC32MX/PIC32MZ families. The 'GL4' sub-family adds a low-power focus with deep-sleep current under 1 uA typical, making it well-suited to battery-powered and always-on applications. The PIC24FJ512GL410 specifically combines the largest Flash density in the family (512KB) with a peripheral set that includes USB, LCD, and CIPs that run autonomously without CPU intervention. Key features include 512KB ECC Flash with dual-partition OTA support, 32KB RAM, integrated segmented LCD driver (up to 472 segments / 8 commons), full-speed USB 2.0 device/host/OTG, a 12-bit ADC up to 500 ksps, six UART, four SPI, and three I2C modules. The device operates from 2.0V to 3.6V with industrial temperature range -40C to +85C and supports sleep currents in the single-digit microamp range using the deep-sleep mode with RTCC. Architecturally, the PIC24FJ512GL410 uses a 16-bit modified Harvard core with a hardware multiplier, dual-partition ECC Flash supporting live OTA updates, and a peripheral trigger system that lets on-chip resources hand off tasks to each other without waking the CPU. This CIP-driven architecture reduces active CPU time and enables long battery life in IoT and sensor-node designs. Typical applications include industrial control HMI panels with LCD, USB-connected medical instrumentation, secure IoT edge nodes with OTA updates, automotive body electronics, smart energy metering, and consumer devices with segmented LCD user interfaces. The combination of large Flash, USB, and LCD makes it particularly attractive to appliances, thermostats, and asset trackers. When designing with this MCU, allocate the dual Flash partitions carefully - one partition runs active code while the other receives the OTA image. Plan the segmented LCD pin assignment up front because pin remapping after layout is costly. The internal 8MHz FRC plus PLL gives flexibility but requires care to meet USB clock-accuracy tolerances. This page synthesizes distributor pricing, verified drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Angebot Kontakt

PIC24FJ512GU405-I/M4

PIC24FJ512GU405-I/M4 - 16-Bit 512KB Flash MCU w/ USB & LCD | Microchip

The Microchip Technology PIC24FJ512GU405-I/M4 is a 16-bit PIC microcontroller from the PIC24FJ 'GU4/GL4' family, delivering 512KB of dual-partition Flash supporting real-time Over-The-Air (OTA) updates and EEPROM emulation, housed in a 48-pin UQFN (6x6 mm) package. It operates up to 32 MHz (with a 48 MHz performance CPU core) and integrates 32KB SRAM, full-speed USB, an LCD controller, and a rich set of Core Independent Peripherals (CIPs) for low-power embedded designs. The 'I/M4' suffix denotes the industrial temperature range (-40C to +85C) and the 48-UQFN (M4) package variant. A PIC microcontroller (MCU) is a compact, programmable processor that integrates CPU, memory, and peripherals on a single CMOS die. PIC24F devices use a 16-bit modified Harvard architecture with a wide instruction set, positioning them between 8-bit PIC16/PIC18 parts and 32-bit PIC32 MCUs. The 'FJ' family is the eXtreme Low-Power (XLP) line, designed for battery-powered applications where nanoWatt sleep currents and active-mode efficiency extend runtime. Compared with general-purpose MCUs, PIC24F parts offer deterministic interrupt response, peripheral collaboration through CIPs (e.g. Configurable Logic Cells, DMA, CRC), and a mature MPLAB XC16 toolchain ecosystem. Key features include 512KB dual-partition Flash with live OTA firmware swap, 32KB SRAM, full-speed USB 2.0 device/host/OTG, an integrated segmented LCD driver (up to 384 segments), up to 53 general-purpose I/O, multiple UART/SPI/I2C peripherals, 12-bit ADC (12 channels, with selectable 10-bit mode), 5-bit DAC, multiple timers, and 2 comparators. The dual-partition Flash architecture enables fail-safe OTA updates by running new firmware from the inactive partition while the live partition continues execution, then atomically swapping roles on reboot. Hardware crypto and a true random number generator are absent on this device. Typical applications include battery-powered IoT sensor hubs, USB-enabled portable medical devices, segment-LCD thermostats and metering, wearables with OTA firmware, secure access control panels, and industrial HMI terminals. The integrated LCD and USB combined with 512KB Flash make it especially suitable for connected, display-driven products where BOM integration is critical. Designers migrating from smaller PIC24F parts gain headroom for richer application code and over-the-air feature deployment without external memory. When designing with this MCU, ensure all VSS/VDD pins are connected even if one rail appears unused, because partial rail connection can fail ICSP programming. Decouple each VDD with a 100 nF X7R capacitor placed within 2 mm of the pin, and reserve a 10 uF bulk cap at the regulator output. Choose the -I/M4 suffix for industrial temperature UQFN, -I/PT for industrial TQFP, and the -E variants for extended temperature.

Angebot Kontakt

PIC24FJ512GU405-I/PT

PIC24FJ512GU405-I/PT - 16-bit MCU 512KB Flash USB/LCD 48-TQFP | Microchip

The Microchip PIC24FJ512GU405-I/PT is a 16-bit PIC24F microcontroller integrating 512 KB of ECC Flash, 32 KB SRAM, full-speed USB 2.0, an LCD controller, and a rich set of Core Independent Peripherals (CIPs) in a 48-pin TQFP (7x7 mm) package. It executes instructions at 16 MIPS from a 32 MHz system clock derived from an internal 8 MHz FRC with PLL, supporting industrial temperature range (-40C to +85C). A 16-bit microcontroller (MCU) is a microprocessor core that processes data in 16-bit-wide chunks, balancing 8-bit simplicity with 32-bit performance. It belongs to the taxonomy: microcontroller -> embedded MCU -> 16-bit MCU -> RISC MCU -> semiconductor. PIC24F devices specifically target ultra-low-power (eXtreme Low Power) applications, making them well-suited to battery-powered and energy-harvesting designs. Key features of the PIC24FJ512GU405 include dual-partition Flash supporting real-time Over-The-Air (OTA) firmware updates and EEPROM emulation without external components, eliminating in-field firmware-update downtime. Integrated peripherals include a 12-bit ADC, multiple UART/SPI/I2C, Real-Time Clock, comparators, PWM, and a segmented LCD driver. The full-speed USB 2.0 device controller enables tethered or self-powered connected-product designs without an external transceiver. The device uses a Harvard RISC architecture with modified Harvard memory mapping, achieving deterministic 32 MHz operation with deep-sleep currents in the microamp range. Core Independent Peripherals handle tasks like signal conditioning, waveform generation, and event-based sequencing without CPU wake-ups, dramatically reducing average power. Typical applications include IoT sensor nodes with LCD displays, USB-connected industrial data loggers, secure OTA-updatable consumer appliances, low-power medical monitoring, and remote-control human-machine interfaces requiring segmented LCD readouts. The dual-partition OTA capability is critical for products that must update firmware without service interruption. When designing with this part, allocate sufficient decoupling (100 nF + bulk) near each VDD/VSS pair, keep the 48-pin TQFP PCB layout symmetrical, and reserve a programming/debug footprint for the 4-wire ICSP interface. Pay attention to the USB D+/D- trace impedance (90 ohm differential) for FCC compliance. This page synthesizes distributor pricing, drop-in alternatives, application guidance, and PCB design notes that go beyond what the manufacturer datasheet or distributor catalog pages typically surface in one place.

Angebot Kontakt

PIC24FJ512GU405T-I/M4

PIC24FJ512GU405T-I/M4 - 512KB Flash USB MCU | Microchip | 48-UQFN

The Microchip PIC24FJ512GU405T-I/M4 is a 16-bit PIC microcontroller from the PIC24F eXtreme Low-Power family, featuring 512KB dual-partition Flash, 32KB RAM, full-speed USB, and an integrated LCD controller, housed in a 48-pin UQFN (6x6 mm) package with exposed pad. It operates up to 32MHz (16 MIPS) from a 2.0V to 3.6V supply across an industrial -40C to +85C temperature range, and is supplied on tape and reel ("T" suffix) for high-volume SMT assembly. A 16-bit microcontroller (MCU) is a programmable embedded processor that balances 8-bit simplicity with 32-bit performance. The PIC24FJ sits in the hierarchy: microcontroller -> 16-bit MCU -> PIC24F -> eXtreme Low-Power PIC -> PIC24FJ GU4/GL4 family. Compared with 8-bit MCUs, 16-bit PICs deliver wider datapaths, more RAM, richer peripherals and DMA, while keeping a streamlined instruction set optimized for C and assembly. The PIC24FJ series in particular emphasizes low active and sleep current for battery-powered products. Key features include 512KB dual-partition Flash supporting real-time Over-The-Air (OTA) updates and EEPROM emulation, 32KB SRAM, hardware crypto engine, USB 2.0 full-speed (Host/Device/OTG), up to 39 I/O pins, and a segmented LCD controller with charge pump. Core-independent peripherals (CIPs) such as configurable logic cells, CLC, MCCP/SCCP, 16-bit timers, and 12-bit ADC reduce CPU burden and enable event-driven design. The dual-partition Flash lets the firmware swap between two images during OTA, eliminating external bootloader memory. Architecturally, the PIC24FJ GU4 family uses a modified Harvard architecture with a 16-bit datapath, hardware multiply/divide, and dedicated DMA to peripherals. The dual-partition Flash controller supports live firmware updates by remapping the active partition, while the segmented LCD driver with integrated charge pump drives up to 8 commons and 48 segments without external bias resistors, simplifying low-power HMIs. Typical applications include USB-enabled IoT nodes with OTA firmware updates, battery-powered industrial HMIs with segmented LCD, secure connected sensors with hardware crypto, and USB HID peripherals such as data loggers and human-interface devices. The wide Flash and RAM budget also supports medical device accessories and asset-tracking tags. Designers favor this part when they need USB, an LCD, and OTA updates in a single low-pin-count QFN. When designing with this part, plan Flash partitions for A/B image swap to enable robust OTA recovery and reserve one erase-block for EEPROM emulation rather than wearing the main image. The 6x6 mm UQFN has an exposed thermal pad that must be soldered to a continuous ground plane for thermal and signal-integrity performance; do not route signal traces under the EP. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, including same-package Microchip family variants, cross-package guidance, and verified parametric proximity data.

Angebot Kontakt

PIC24FJ512GU406-E/MR

PIC24FJ512GU406-E/MR - 16-bit MCU 512KB Flash USB LCD 64-QFN

The Microchip Technology PIC24FJ512GU406-E/MR is a 16-bit microcontroller from the PIC24F 'GU4/GL4' family with 512KB ECC Flash, 32KB RAM, integrated full-speed USB, and an LCD driver, housed in a 64-pin QFN (9x9 mm) package with extended operating temperature range (-40C to +125C). Key features include a 16-bit modified Harvard CPU core running at 32 MHz (16 MIPS) with single-cycle multiply and divide, dual-partition flash supporting real-time Over-The-Air (OTA) firmware updates, EEPROM emulation, a segmented LCD driver with up to 64 segments, full-speed USB 2.0 with device/host/OTG capability, and multiple Core Independent Peripherals (CIPs) such as configurable logic cells, 16-bit PWMs, and a 12-bit ADC. The PIC24FJ512GU406 family also integrates a hardware crypto engine, a real-time clock and calendar (RTCC) with VBAT backup, a charge time measurement unit (CTMU) for touch sensing, and 53 general-purpose I/O pins grouped across multiple ports (RA/RB/RC/RD/RF/RG). 2V to 3.6V single-supply operation and multiple low-power sleep modes (Doze, Idle, Sleep, Deep Sleep) target battery-powered designs. Typical applications include industrial control panels with segmented LCDs, USB peripherals and embedded host devices, IoT edge nodes requiring OTA firmware updates, medical instrumentation displays, automotive body and HVAC control modules, and consumer appliances with touch and graphical segmented UIs. The 'GU' parts add the LCD driver; the 'GL' sister family parts in the same QFN-64 footprint omit USB for cost-sensitive versions. The 'E' suffix indicates an extended temperature grade (-40C to +125C) suitable for automotive and industrial environments. Always select AEC-Q100 qualified variants for safety-relevant automotive ECUs. This page consolidates distributor pricing, parametric depth, application guidance, and pin-compatible alternatives in a single datasheet-context view, intended to shorten the BOM decision cycle for engineers evaluating the PIC24FJ512GU406-E/MR against other members of the PIC24FJ 'GU/GL' family and against competing 16-bit MCUs.

Angebot Kontakt

PIC24FJ512GU406-E/PT

PIC24FJ512GU406-E/PT - 16-Bit MCU, 512KB Flash, USB, LCD | Microchip

The Microchip Technology PIC24FJ512GU406-E/PT is a 16-bit PIC microcontroller from the PIC24FJ 'GU4' family, delivering 16 MIPS at 32 MHz with 512 KB of dual-partition ECC Flash, 32 KB of RAM, and integrated full-speed USB plus segment LCD driver. Housed in a 64-pin TQFP (10x10 mm) package, the 'E' suffix denotes the extended (-40C to +125C) operating-temperature grade and the /PT suffix denotes the TQFP package. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile data memory (RAM), and a rich set of on-chip peripherals such as timers, communication controllers, ADCs, and GPIOs. PIC24FJ MCUs belong to the broader 16-bit MCU family, sitting architecturally above 8-bit PIC16/PIC18 parts and below 32-bit Cortex-M devices in the Microchip portfolio, and they are commonly used in cost-sensitive, low-power embedded applications. Key features of the PIC24FJ512GU406-E/PT include 512 KB of dual-partition Flash that supports live Over-The-Air (OTA) firmware updates without device downtime, hardware EEPROM emulation, and 32 KB of RAM. The 'GU' family also adds Core Independent Peripherals (CIPs) such as CLC, PWM, capture, and a 12-bit ADC, while the integrated LCD driver supports segmented displays and the on-chip USB 2.0 full-speed controller eliminates an external PHY. Power-management features include multiple Idle, Sleep, and Doze modes that allow extended battery life in always-on products. Typical applications for the PIC24FJ512GU406-E/PT include industrial HMI panels with segmented LCDs, USB-connected sensor hubs, automotive body and cluster subsystems, home appliances with LCD user interfaces, low-power IoT edge nodes that require OTA firmware maintenance, and medical handhelds where 16-bit math and segment-LCD drives coexist. The wide -40C to +125C operating range and AEC-Q100 qualification make the 'E' grade suitable for automotive under-hood and industrial environments. When designing with this device, confirm that the 64-pin TQFP pad pattern is acceptable for the PCB footprint library and that the USB D+/D- pins are routed with 90 ohm differential impedance. Programmers should use MPLAB X IDE with the XC16 compiler, and the dual-partition Flash layout must be configured through the device configuration bits before live OTA updates are enabled. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC24FJ 'GU/GL' families, and practical design notes not collated in the manufacturer datasheet.

Angebot Kontakt

PIC24FJ512GU406-I/MR

PIC24FJ512GU406-I/MR - 512KB Flash 16-bit MCU USB LCD | Microchip

The Microchip Technology PIC24FJ512GU406-I/MR is a 16-bit microcontroller from the PIC24F family featuring 512KB of dual-partition Flash, 32KB RAM, full-speed USB 2.0, segmented LCD driver, and a 16 MIPS CPU core running up to 32 MHz, all housed in a 64-pin QFN (MR) package measuring 9x9 mm. The dual-partition Flash architecture supports real-time Over-The-Air (OTA) firmware updates and EEPROM emulation, enabling firmware upgrades without application downtime - a critical feature for connected embedded products. A 16-bit microcontroller (MCU) is an integrated circuit containing a CPU, memory, and programmable peripherals on a single die. The 16-bit data path allows single-cycle arithmetic on integer values up to 65,535, balancing performance and code density between 8-bit (e.g., PIC16, AVR) and 32-bit (e.g., Cortex-M) architectures. The PIC24F family is Microchip's low-power 16-bit line, positioned above PIC16/PIC18 8-bit parts and below dsPIC/PIC32 32-bit offerings in the company's portfolio hierarchy. Key features include 16 MIPS performance at 32 MHz, multiple Core Independent Peripherals (CIPs) that operate without CPU intervention, a 12-bit ADC, multiple UART/SPI/I2C interfaces, and a segmented LCD driver supporting up to 512 segments. The 512KB ECC Flash and 32KB SRAM provide ample headroom for USB stacks, LCD UI assets, and OTA update buffers. Wide operating voltage (2.0V to 3.6V) and low-power sleep modes with RTC retention make this MCU well-suited to battery-powered applications. Architecturally, the PIC24FJ GU4/GL4 family combines a modified Harvard architecture with a 16-bit instruction word and 24-bit instruction bus. The dual-partition Flash divides memory into two independent 256KB regions, allowing one partition to execute application code while the other receives a firmware update, then swap roles atomically for true live update capability. Core Independent Peripherals (CIPs) like CLC, MCCP, and DMA operate autonomously, freeing the CPU from routine tasks. Typical applications include USB Human Interface Devices (HIDs) with integrated LCD displays, industrial control panels with segmented LCD readouts, medical devices requiring secure OTA firmware updates, IoT edge nodes with sensor readouts, and consumer appliances with graphical segment displays. The combination of USB, LCD, and OTA in a single part eliminates 15-200 external components typically required by separate parts. When designing with this device, allocate one Flash partition for the bootloader and one for application code from project start - retrofitting OTA support after firmware development is significantly harder. Ensure the 64-pin QFN ground pad is soldered with adequate thermal vias; pin pitch is 0.5 mm, requiring precise stencil design for reliable assembly. This page synthesizes distributor pricing, drop-in alternative PIC24F family members, parametric comparisons, and practical design notes not consolidated on the manufacturer datasheet or individual distributor pages.

Angebot Kontakt

PIC24FJ512GU406-I/PT

PIC24FJ512GU406-I/PT - 16-Bit 32MHz 512KB Flash MCU with USB & LCD | Microchip

The Microchip Technology PIC24FJ512GU406-I/PT is a 16-bit microcontroller IC from the PIC® 24F family, featuring a 32MHz CPU core (16 MIPS), 512KB ECC Flash with Dual Partition for live OTA updates, and 32KB SRAM, housed in a 64-pin TQFP (10x10 mm) package. It integrates a full-speed USB 2.0 peripheral, a segmented LCD controller, and a rich set of Core Independent Peripherals (CIPs) for offloading tasks from the CPU. The 'I' suffix indicates the industrial -40C to +85C operating temperature range. A 16-bit microcontroller (MCU) is a microprocessor with a 16-bit data path, ALU, and registers, offering higher code density, faster arithmetic, and richer peripheral integration than 8-bit MCUs while remaining simpler and lower-power than 32-bit Cortex-M devices. Within the embedded hierarchy, MCUs belong to microcontrollers, which sit under microprocessors, which are subclasses of semiconductor ICs. The PIC24F 'J' series specifically targets ultra-low-power applications with nanoWatt sleep modes and operates from a 2.0V to 3.6V supply, suiting battery-powered and energy-harvesting designs. Key features include up to 512KB self-programmable Flash with Error-Correcting Code (ECC) and live Dual Partition OTA update support, 32KB SRAM, hardware Real-Time Clock and Calendar (RTCC), 10-bit and 12-bit ADC modules, multiple UART/SPI/I2C peripherals, and segmented LCD driver capable of driving up to 60 segments (PT package). The 64-pin TQFP-64 (10x10) provides ample I/O with extensive remappable peripherals via PPS (Peripheral Pin Select). The architecture is built on a modified Harvard structure with 16-bit instructions and a 24-bit instruction word, enabling compact code and deterministic interrupt response. ECC-protected Flash significantly improves reliability in industrial and consumer applications subject to soft-error upset, while the dual-partition Flash scheme allows background firmware updates with atomic rollback on failure - a critical feature for IoT and connected devices that cannot tolerate bricked field units. Typical applications include USB-enabled IoT sensor hubs, low-power medical monitoring devices with LCD readouts, industrial HMI panels with segmented displays, battery-powered data loggers, and consumer appliances with USB diagnostics or firmware update capability. The combination of integrated LCD and USB in a single MCU eliminates external drivers and bridges, reducing BOM and PCB area. When designing with this device, pay careful attention to decoupling: place 100nF ceramic capacitors as close as possible to every VDD/VSS pair and a bulk 4.7uF to 10uF tantalum or ceramic near the package. The USB DP/DM traces require 90-ohm differential impedance and a precision full-speed USB pull-up resistor on D+; for robust USB-IF compliance, refer to Microchip application note AN1227. SegLCD bias generation can be routed through internal charge pump or external resistor ladder - verify contrast across the full -40C to +85C temperature range. This page synthesizes distributor pricing, drop-in compatible PIC24FJ family alternatives, and practical design notes not found in the manufacturer datasheet alone, providing an engineering decision aid beyond raw specifications.

Angebot Kontakt

PIC24FJ512GU406T-I/PT

PIC24FJ512GU406T-I/PT - 512KB Flash, USB, 16-bit MCU | Microchip

The Microchip Technology PIC24FJ512GU406T-I/PT is a 16-bit PIC24F microcontroller featuring 512 KB of dual-partition Flash, 32 KB RAM, a full-speed USB 2.0 device/host/OTG controller, and an integrated segmented LCD driver, all housed in a 64-pin TQFP (10x10 mm) package. It operates at up to 32 MHz (16 MIPS) across a 2.0V to 3.6V supply range, and includes Core Independent Peripherals (CIPs) such as CLC, MCCP/SCCP, RTCC, and a 24-channel 12-bit A/D converter. The dual-partition Flash architecture supports real-time Over-The-Air (OTA) firmware updates and EEPROM emulation, enabling field-deployable code updates and parameter storage without external memory. The device carries 53 digital I/O pins and is qualified to AEC-Q100 Grade 1 for automotive embedded applications. CIPs handle deterministic tasks like waveform generation, signal conditioning, and event-triggered ADC conversions in hardware, freeing the CPU for application code. Typical applications include automotive instrument clusters and HVAC controls, USB-connected industrial sensors, consumer human-interface devices with segmented LCDs, secure IoT nodes requiring OTA firmware updates, and battery-powered medical monitors. Real-time OTA updates allow secure bootloader-style firmware replacement without service interruption, while ECC Flash preserves data integrity. When designing, pair the device with a 32.768 kHz crystal on SOSCO/SOSCI for RTCC operation, place decoupling capacitors within 5 mm of each VDD/VSS pair, and follow the PCB layout guidelines in the datasheet for USB DP/DN trace impedance to ensure USB-IF compliance.

Angebot Kontakt

PIC24FJ512GU408-E/PT

PIC24FJ512GU408-E/PT - 16-Bit 32MHz 512KB USB MCU | Microchip

The Microchip PIC24FJ512GU408-E/PT is a 16-bit microcontroller from the PIC24F 'GU4' family featuring a 32 MHz core, 512 KB of dual-partition Flash, 32 KB RAM, full-speed USB, an integrated segmented LCD controller, and 69 I/O pins, housed in an 80-pin TQFP (12x12 mm) package with -40C to +125C extended operating temperature. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and peripheral interfaces. The PIC24FJ 'GU4/GL4' family sits within Microchip's 16-bit eXtreme Low-Power MCU portfolio (a hypernym of: 16-bit MCU -> microcontroller -> embedded processor -> semiconductor) and targets battery-powered and human-interface applications that demand USB connectivity, segmented LCD drive, and field-upgradeable firmware. Key features of this part include 512 KB of Flash supporting real-time Over-The-Air (OTA) dual-partition updates and EEPROM emulation, a hardware Cryptographic Engine (CE) for AES/encryption acceleration, Core Independent Peripherals (CIPs) such as CLC, MCCP, and PTG, and a 16-channel 12-bit ADC with CTMU for touch and current measurement. The integrated segmented LCD controller supports up to 512 segments, eliminating external display driver ICs in HMI designs. Architecturally, the device uses a modified Harvard core with a 16-bit data path, 24-bit instruction word, and a 16-element working register array. USB 2.0 full-speed (12 Mbps) is provided on-chip with an internal transceiver and dedicated DMA, and the segmented LCD driver shares I/O pins with general-purpose digital I/O via configurable multiplexing. Deep sleep modes and an RTC with VBAT retention allow system-level quiescent currents under 1 uA. Typical applications include industrial HMI panels with LCD + USB service-port, USB-connected IoT edge nodes with OTA firmware, secure metering and access control with on-chip AES, and automotive-grade subsystems given the part's -E extended temperature grade and AEC-Q100 qualification noted on the distributor listing. When designing with this MCU, allocate careful pin planning between LCD segments and digital I/O early - the 80-pin TQFP exposes only 69 free I/O once LCD, USB, and debug pins are reserved. Use the dual-partition Flash feature with a verified bootloader to enable fail-safe OTA updates.

Angebot Kontakt

PIC24FJ512GU408-I/PT

PIC24FJ512GU408-I/PT - 16-bit 32MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC24FJ512GU408-I/PT is a 16-bit microcontroller from the PIC24F 'GU4/GL4' family, built on an eXtreme Low-Power architecture and housed in an 80-pin TQFP (12x12 mm) package. It integrates 512 KB of dual-partition Flash supporting real-time Over-The-Air (OTA) updates and EEPROM emulation, 32 KB of RAM, a full-speed USB 2.0 controller, an integrated segmented LCD controller, and a rich set of Core Independent Peripherals (CIPs). The CPU core runs up to 32 MHz (16 MIPS) and integrates hardware multiply/divide, a 17-bit x 17-bit single-cycle MAC, and a high-throughput instruction pipeline tuned for low-power operation. A 16-bit microcontroller is a single-chip computer that processes data 16 bits at a time, sitting between 8-bit MCUs (low cost, simple control) and 32-bit MCUs (high performance, complex OS). 16-bit PIC microcontrollers target mid-range embedded designs that need more computational headroom, larger memory maps, and richer peripherals than 8-bit parts, without the power and code-size overhead of Cortex-M class devices. The PIC24F 'eXtreme Low-Power' subfamily adds nanoWatt XLP sleep modes (as low as 20 nA in deep sleep) that approach the standby current of 8-bit PIC MCUs while preserving 16-bit DSP-class throughput. Key differentiating features of the PIC24FJ512GU408 include 512 KB dual-partition Flash (live field firmware updates with rollback), a 32 KB general-purpose SRAM, hardware crypto accelerators, an 8-channel hardware DMA, a 16-bit Sigma-Delta ADC path, up to 69 general-purpose I/O, a segmented LCD driver with charge pump supporting up to 480 segments, a USB 2.0 full-speed device/host/OTG controller, and a Real-Time Clock Calendar (RTCC) with battery backup. Five timers/capture/compare and multiple UART/SPI/I2C interfaces round out the peripheral set. The dual-partition Flash architecture is the headline feature for OTA designs: a new image can be written to the inactive partition while the active one continues running the application, then swapped on next reset with instant rollback capability. Typical applications include battery-powered IoT sensor nodes with USB firmware update ports, medical wearables requiring segmented LCD readouts, industrial HMI panels with USB diagnostics, and remote sensor telemetry where OTA firmware updates eliminate physical service calls. The integrated LCD controller, hardware USB, and eXtreme Low-Power sleep currents together make this part uniquely suited for sealed, battery-driven human-interface products. When designing with the PIC24FJ512GU408, verify VDD vs. VBAT domain routing carefully and place the 80-pin TQFP on a 4-layer PCB with a continuous ground plane under the exposed pad to meet thermal and EMI requirements. Use MPLAB X IDE with the XC16 compiler and MCC code configurator to take advantage of the integrated CIPs and shorten development time. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt

PIC24FJ512GU410-E/PT

PIC24FJ512GU410-E/PT - 512KB Flash USB LCD MCU | Microchip

The Microchip Technology PIC24FJ512GU410-E/PT is a 16-bit PIC24F microcontroller with 512 KB ECC Flash, 32 KB RAM, full-speed USB 2.0, and an integrated LCD controller, housed in a 100-pin TQFP (PT) package measuring 12x12 mm. It executes instructions at up to 32 MHz (16 MIPS) and operates from 2.0 V to 3.6 V, making it suitable for battery-powered and USB-powered embedded designs. A 16-bit microcontroller (MCU) is a programmable processor with a 16-bit data path, instruction word, and register width. Within the embedded hierarchy it sits between 8-bit MCUs (lower cost, simpler peripherals) and 32-bit ARM Cortex-M MCUs (higher performance, richer ecosystems). The PIC24F family specifically targets ultra-low-power and mixed-signal applications, and the GU4/GL4 sub-family adds dual-partition Flash for live Over-The-Air (OTA) firmware updates without device downtime - a critical capability for connected products deployed in the field. Key features include 512 KB of ECC-protected Flash supporting Dual Partition / EEPROM Emulation, 32 KB SRAM, a 14-channel 12-bit ADC, four I2C, four SPI, and five UART peripherals, plus a hardware Cryptographic Engine (AES, DES, 3DES, SHA, MD5, and RNG). Core-independent peripherals (CIPs) such as Configurable Logic Cells (CLC), Multiple Output Capture/Compare/PWM, and a 32-bit Real-Time Clock Calendar enable event-driven designs that minimize CPU wake-ups and reduce average power consumption below 1 uA in Deep Sleep mode. The device's architecture combines a modified Harvard bus with a 16-bit instruction word and 24-bit instruction address space, giving a deterministic interrupt latency of 5 cycles. The full-speed USB 2.0 peripheral with integrated PHY supports HID, CDC, MSD, and Vendor classes without an external transceiver. The segmented LCD driver can directly control up to 480 pixels (8 commons x 60 segments) with internal charge pump and contrast bias generation, eliminating the need for an external LCD bias network. Typical applications include low-power IoT sensor nodes with OTA firmware update capability, USB HID human-interface devices (keyboards, mice, touch panels), medical devices such as glucose meters and infusion pumps, industrial HMI panels with integrated LCD, secure authentication tokens using the on-chip AES engine, and home automation controllers with segmented displays. The wide operating temperature range of -40C to +125C (E suffix indicates Extended temperature grade) also supports outdoor and industrial deployments. When designing with this device, allocate pin remapping carefully between the LCD segment bus and parallel master port functions - they share pins and cannot be used simultaneously. Ensure the dual-partition Flash bootloader (Boot-Secure mode) is provisioned before locking the configuration registers, and consider using the on-chip Crypto Engine to offload AES-256 from the CPU rather than implementing it in firmware. This page synthesizes DigiKey/Mouser pricing, drop-in TQFP-100 alternatives from the PIC24FJ family, and practical low-power design notes that go beyond the manufacturer datasheet.

Angebot Kontakt

PIC24FJ512GU410-I/PT

PIC24FJ512GU410-I/PT - 512KB Flash, USB, LCD 16-bit MCU | Microchip

The Microchip PIC24FJ512GU410-I/PT is a 16-bit eXtreme Low-Power microcontroller featuring 512 KB of dual-partition Flash, 32 KB SRAM, integrated full-speed USB 2.0 device/host/OTG, and an on-chip LCD controller, housed in a 100-pin TQFP (PT) package. It executes instructions at 32 MHz (16 MIPS) from the PIC24F core, and operates from 2.0 V to 3.6 V with five low-power modes including a low-voltage Sleep mode that keeps the RTCC alive from a separate LDO. A 16-bit microcontroller (MCU) is an embedded processor that fetches 16-bit instructions and operates on 8/16-bit data paths, balancing code density, deterministic interrupt latency, and richer peripherals over 8-bit cores. Within the broader taxonomy, the PIC24F belongs to the 16-bit MCU -> microcontroller -> embedded processor -> semiconductor family, and the PIC24FJ512GU410 specifically targets low-power, USB-enabled human-machine interface (HMI) designs with segment LCDs. Key features include 512 KB self-programmable Flash with dual-partition OTA updates and EEPROM emulation, 32 KB SRAM, a 10-bit 1 MSPS ADC, multiple UART/SPI/I2C peripherals, a Real-Time Clock/Calendar (RTCC), a DMA controller, and the segment LCD driver supporting up to 480 segments. The integrated USB 2.0 full-speed transceiver eliminates external PHY cost, while the DMA engine offloads peripheral-to-memory transfers for higher throughput. Typical applications include industrial segment-LCD HMI panels, USB sensor hubs, battery-powered metering with display, medical handheld instrumentation, and home-automation controllers requiring OTA firmware updates. The wide operating voltage range and low-power Sleep modes make it equally suited to line-powered and battery-backed designs where the LCD must remain visible while the core is dormant. When designing with this device, ensure VDD decoupling follows the manufacturer reference layout with 100 nF caps at every supply pin and a 10 µF bulk near the regulator. The dual-partition Flash enables bootloader-driven OTA updates without external memory, but designers must plan partition sizes and the live-update state machine before deployment. This page combines distributor pricing, drop-in alternatives, and practical design notes that are not aggregated in the manufacturer datasheet alone.

Angebot Kontakt

PIC24FJ512GU410T-I/PT

PIC24FJ512GU410T-I/PT - 512KB Flash USB MCU 100-TQFP | Microchip

The Microchip Technology PIC24FJ512GU410T-I/PT is a 16-bit eXtreme Low-Power PIC24F microcontroller featuring 512KB of dual-partition Flash, 32KB SRAM, full-speed USB, an integrated LCD controller, and a 32MHz (16 MIPS) CPU core. It ships in a 100-pin TQFP (PT) package rated for the industrial -40C to +85C temperature range, making it suitable for human-machine interfaces and connected battery-powered products. A 16-bit PIC microcontroller is a member of the microcontroller (MCU) family that uses a 16-bit modified Harvard data path, sitting between 8-bit AVR/PIC MCUs and 32-bit ARM Cortex-M devices. Within the MCU taxonomy, PIC24F parts belong to the "F" subfamily of the PIC24 family, characterized by eXtreme Low-Power (XLP) technology, integrated peripherals, and dual-partition Flash that supports live Over-The-Air (OTA) firmware updates and EEPROM emulation. Key differentiating features of the PIC24FJ512GU410T-I/PT include the 512KB dual-partition Flash (vs 256KB on smaller siblings), 32KB RAM, the full-speed USB 2.0 full-speed device/host/OTG peripheral, the segmented LCD driver (up to 512 segments), and a rich set of Core Independent Peripherals (CIPs) such as Configurable Logic Cells (CLC), Multiple Capture/Compare/PWM, and a hardware crypto engine for selected family members. The 16 MIPS throughput from the 32MHz oscillator supports real-time USB, LCD refresh, and CIP processing in parallel without CPU intervention. Architecturally, the device uses Microchip's modified Harvard architecture with separate program Flash and data SRAM buses, a hardware multiply/divide unit, a 16x16-bit working register array, and a peripheral bus that decouples I/O from the core for predictable interrupt latency. The dual-partition Flash allows one partition to run application code while the other receives an OTA image, then the bootloader atomically swaps roles, eliminating firmware-update downtime in connected sensor and metering products. Typical applications include USB-connected sensor hubs, industrial HMI panels with LCD displays, medical handheld instruments, home-automation gateways, and battery-powered IoT endpoints requiring OTA firmware maintenance. The wide operating voltage range and integrated LCD make it a strong fit for segment-LCD user interfaces in metering, appliance, and instrumentation products. When designing with this MCU, plan the dual-partition layout, ensure the USB bus is correctly terminated (D+/D- with 15kohm pulldown on D- for full-speed device mode), and place the decoupling capacitors within 5mm of each VDD/VSS pair to keep the eXtreme Low-Power modes stable. The PIC24FJ512GU410T-I/PT is the -40C to +85C industrial variant in 100-TQFP; for the 100C extended-temperature option, choose the PIC24FJ512GU410T-E/PT suffix. This page consolidates distributor pricing, parametric comparison with same-family siblings, cross-brand drop-in alternatives, and design notes that go beyond what the manufacturer datasheet alone provides.

Angebot Kontakt

PIC24FJ64GA002-E/ML

PIC24FJ64GA002-E/ML - 16-bit 32MHz 64KB Flash MCU | Microchip

The Microchip Technology PIC24FJ64GA002-E/ML is a 16-bit PIC24F microcontroller running at 32 MHz with 64 KB Flash (22K x 24 words), 8 KB RAM, and a 28-pin QFN (6x6 mm) package. It integrates nanoWatt XLP extreme-low-power technology and delivers up to 16 MIPS performance from its modified Harvard architecture, including a 17-bit hardware multiplier and 16-bit hardware divider. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data memory, and a rich set of peripherals on a single die, forming the lowest tier of the embedded system hierarchy alongside sensors, power management, and connectivity ICs. The PIC24F family sits between the 8-bit PIC16/PIC18 and the 32-bit PIC32MX/PIC32MZ families, targeting applications that need more performance than 8-bit can deliver but do not justify the cost of a 32-bit core. Key features include 16 MIPS operation at 32 MHz, 8 MHz internal oscillator with 4x PLL and multiple divide options, on-chip 64 KB Flash program memory, 8 KB SRAM, and the nanoWatt XLP power-management modes that drop quiescent current below 1 uA in sleep. The 28-pin QFN exposes up to 21 general-purpose I/O, two analog comparators, a 10/12-bit ADC with up to 10 input channels, two UART/SPI/I2C capable Enhanced Capture/Compare/PWM modules, three 16-bit timers, and a real-time clock calendar with separate 32 kHz oscillator pins. The PIC24FJ64GA002 family uses a modified Harvard architecture with separate instruction and data paths, allowing instruction fetch and data access to occur in the same cycle. C compiler optimization (MPLAB XC16) is supported with a C-friendly instruction set, 16 working registers, and 32 interrupt vectors with configurable priority. CodeGuard basic security prevents unauthorized Flash reads for IP protection. Typical applications include low-power IoT sensor nodes, battery-powered portable instrumentation, USB/USB-OTG device firmware (with the PIC24F USB variant), industrial control panels, and consumer white goods. The wide 2.0V-3.6V operating range and nanoWatt XLP modes are especially useful for coin-cell or AAA-cell products that must run for years without battery replacement. Design with at least a 100 nF decoupling capacitor on every VDD pin and a 10 uF bulk capacitor on the main rail. Leave the DISVREG pin tied correctly per the package variant (see datasheet) to ensure the on-chip voltage regulator powers the core cleanly without noise coupling into analog peripherals. This page synthesizes distributor pricing, drop-in same-package and cross-package compatible alternatives, design notes, and comparison data that are not available on any single manufacturer page.

Angebot Kontakt

PIC24FJ64GA002-E/SO

PIC24FJ64GA002-E/SO - 16-bit 32MHz 64KB Flash MCU | Microchip

The Microchip Technology PIC24FJ64GA002-E/SO is a 16-bit PIC24F microcontroller IC running at up to 32MHz with 64KB (22K x 24) of Flash program memory and 8KB of RAM, housed in a 28-pin SOIC wide-body package with industrial-grade -40C to +125C operating temperature. The device integrates a 10-bit ADC, multiple timers, UART, SPI, and I2C peripherals, and is part of Microchip's PIC24F general-purpose flash MCU family. A 16-bit microcontroller is a microprocessor core with a 16-bit data path, instruction set, and registers, offering a balance between 8-bit simplicity and 32-bit performance. In the semiconductor taxonomy, the PIC24FJ64GA002 sits within microcontrollers -> embedded processors -> integrated circuits. The 16-bit MCU family (PIC24) is the bridge tier between Microchip's 8-bit PIC16/PIC18 lines and 32-bit PIC32 parts, giving designers substantially more compute headroom and addressable memory than 8-bit parts without the complexity of a 32-bit ARM Cortex-M core. Key features include 16 MIPS performance at 32MHz CPU clock, 64KB self-programmable Flash with EEPROM emulation, 8KB SRAM, a 10-bit ADC with up to 13 analog channels, 5x16-bit timers, two UART modules, two SPI modules, and an I2C module. The -E suffix indicates the extended temperature grade (-40C to +125C), making the part suitable for industrial and harsh-environment designs. Technically, the PIC24FJ64GA002 uses a modified Harvard architecture with a 16-bit datapath, 24-bit instructions, and a hardware multiplier that performs a 16x16-bit multiplication in one cycle. The device runs from 2.0V to 3.6V and supports nanoWatt sleep modes that drop quiescent current into the microamp range, enabling battery-powered designs. Typical applications include industrial sensor nodes, low-power IoT endpoints, motor control front-ends, USB device interfaces (with on-chip USB 2.0 full-speed transceiver in select variants), home automation controllers, and educational/prototyping boards. The 28-pin SOIC wide-body footprint makes hand-soldering and rework straightforward for hobbyists and small-volume production. When designing with this part, note that the 'E' suffix denotes the extended temperature grade (different from the -I grade which runs -40C to +85C). Engineers targeting AEC-Q100 automotive qualification should select a different PIC24F variant. For programming, Microchip's MPLAB X IDE with the XC16 compiler is the canonical toolchain; ICD 3 and PICkit 4 programmers/debuggers are supported out of the box. This page synthesizes distributor pricing, parametric alternatives, and practical design considerations for the PIC24FJ64GA002-E/SO beyond the manufacturer datasheet, including a direct comparison with the closely related PIC24FJ64GA002-I/SO and PIC24FJ32GA002-E/SO drop-in equivalents.

Angebot Kontakt

PIC24FJ64GA002-E/SP

PIC24FJ64GA002-E/SP - 16-bit MCU 64KB Flash 28-SPDIP | Microchip

The Microchip Technology PIC24FJ64GA002-E/SP is a 16-bit PIC24F microcontroller featuring 64 KB of Flash program memory, 8 KB of RAM, and a 32 MHz (16 MIPS) CPU core, housed in a 28-pin SPDIP (Skinny Plastic DIP) through-hole package. It belongs to the nanoWatt XLP (eXtreme Low Power) family and operates from 2.0V to 3.6V, making it well suited to battery-powered and energy-harvesting designs. A microcontroller (MCU) is an integrated circuit that combines a CPU, memory, and programmable I/O peripherals on a single die, allowing embedded systems to perform sensing, control, and communication tasks without external logic. The PIC24F sits in the hierarchy of microcontrollers -> 16-bit MCU -> RISC microcontroller -> embedded processor -> semiconductor, providing more computational headroom than 8-bit PIC18 devices while consuming less power than 32-bit PIC32 parts. Key features include 64 KB Flash (22K x 24 words), 8 KB SRAM, integrated 16-channel 10-bit ADC, four 16-bit timers, two UART, two SPI, two I2C peripherals, a Real-Time Clock/Calendar (RTCC) with calendar mode, and a Charge Time Measurement Unit (CTMU) for capacitive touch sensing. It also offers five PWM/Output Compare modules, a Parallel Master Port (PMP), and a 4-wire programming/debug interface (ICSP) that supports Microchip's MPLAB X IDE and PICkit programmers. The device uses Microchip's modified Harvard architecture with a 16-bit wide data path and 24-bit instruction word, giving it strong C-compiler efficiency through the MPLAB XC16 toolchain. Internal RC oscillators and a 32 kHz secondary oscillator reduce external component count, while the nanoWatt XLP features bring sleep currents down to roughly 20 nA in Deep Sleep mode, enabling multi-year battery life in periodic-sampling sensor nodes. Typical applications include industrial sensor hubs, handheld instrumentation, USB/HID peripherals, building automation, low-power wireless sensor nodes, motor control front-ends, and consumer white goods where the 28-SPDIP package simplifies hand-soldered prototypes and field-replaceable modules. When designing with this part, budget for decoupling (100 nF on each VDD/AVDD pair plus a bulk 10 uF), keep analog and digital grounds separated until they join at the MCU, and remember that the PIC24FJ64GA002-E/SP is the Extended (E) temperature grade -40C to +125C, so the -I variant is preferred for benign consumer-only environments. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the bare manufacturer datasheet, supporting engineers making sourcing and second-source decisions.

Angebot Kontakt

PIC24FJ64GA002-I/ML

PIC24FJ64GA002-I/ML - 16-bit MCU, 64KB Flash, 28-QFN | Microchip

The Microchip Technology PIC24FJ64GA002-I/ML is a 16-bit RISC Flash microcontroller from the PIC24F family, delivering 16 MIPS performance at 32 MHz with 64 KB (22K x 24) of program Flash memory and 8 KB of SRAM in a 28-pin QFN (6x6 mm) package with exposed pad. The device operates from 2.0 V to 3.6 V across the industrial -40C to +85C temperature range and is AEC-Q100 qualified for automotive use. A microcontroller (MCU) is a single-chip computer containing a CPU core, volatile and non-volatile memory, and programmable peripherals. Microcontrollers sit within the broader semiconductor hierarchy as integrated circuits > digital logic ICs > microcontrollers, and they form the lowest-level intelligence layer beneath microprocessors in embedded systems. The PIC24F family uses a modified Harvard 16-bit architecture with a wide 24-bit instruction word that improves code density relative to 8-bit MCUs while keeping the peripheral ecosystem simple. Key features include a 16-channel 10-bit A/D converter with 500 ksps throughput, two UART/SPI/I2C configurable serial interfaces, five 16-bit timers, a real-time clock calendar, and a peripheral pin select (PPS) remappable I/O subsystem on 21 general-purpose I/O pins. The integrated charge time measurement unit (CTMU) enables touch sensing and capacitive measurement, while the JTAG interface supports in-circuit debugging and boundary-scan testing per the IEEE 1149.1 standard. Architecturally, the PIC24FJ64GA002 separates program Flash (64 KB) and data EEPROM (no separate EEPROM on this part; emulation is supported from Flash) from the 8 KB SRAM, with a unified 16 KB data Flash auxiliary region used for EEPROM emulation and parameter storage. The 16-bit modified-Harvard pipeline, hardware multiplier, and divide engine deliver deterministic 16 MIPS throughput, while the integrated 8 MHz internal oscillator plus PLL simplify BOM cost by eliminating external clocking hardware in many designs. Typical applications include automotive body controllers, HVAC control modules, industrial sensor interfaces, low-power handheld instrumentation, and USB/connectivity co-processor bridging. The combination of 64 KB Flash and 8 KB SRAM is well matched to mid-tier embedded protocols and small graphical user interfaces. The AEC-Q100 grade also makes it suitable for under-hood and cabin automotive subsystems where the -40C to +85C range is mandatory. When designing with this device, ensure the QFN exposed pad is soldered to a sufficiently large copper pour to meet the 31 C/W typical thermal resistance and to provide a low-inductance ground reference. PPS configuration must be programmed before enabling peripherals, and unused pins should be configured as outputs low to minimize current leakage on this 16 MIPS architecture. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.

Angebot Kontakt

PIC24FJ64GA002-I/SO

PIC24FJ64GA002-I/SO - 16-bit 32MHz 64KB Flash MCU | Microchip

The Microchip PIC24FJ64GA002-I/SO is a 16-bit PIC24F RISC microcontroller with 64KB of Flash program memory and 8KB of RAM, operating at up to 32MHz (16 MIPS) in a 28-pin SOIC wide package. It features a 10-bit ADC, JTAG boundary scan, and a rich peripheral set including UART, SPI, and I2C, targeting general-purpose embedded applications. The industrial temperature range of -40C to +85C and 2.0V-3.6V wide operating voltage make it suitable for battery-powered and industrial designs. What is a PIC24F microcontroller? The PIC24F family from Microchip is a 16-bit flash microcontroller family built on a modified Harvard architecture with a 16-bit wide data path and 24-bit wide instructions. Within the broader taxonomy, PIC24F sits between 8-bit PIC MCUs and 32-bit PIC32 devices, occupying the mid-range slot where engineers need more compute and memory than 8-bit offers, but the simplicity and low cost of a PIC rather than the complexity of an ARM Cortex-M part. The 'FJ' sub-family specifically adds nanoWatt XLP (eXtreme Low Power) technology for portable designs. Key differentiating specifications include 64KB Flash (22K x 24 instruction words), 8KB SRAM, 21 digital I/O pins, 16-channel 10-bit ADC, two UART modules, two SPI modules, and two I2C modules. Real-Time Clock/Calendar (RTCC) hardware and a 32kHz secondary oscillator support time-keeping applications without the main core running. Five 16-bit timers/counters and nine 16-bit PWM channels enable motor-control and lighting designs. JTAG and ICSP (In-Circuit Serial Programming) provide flexible debug and field-upgrade paths. Architecturally, the PIC24FJ64GA002 uses a modified Harvard bus with separate program and data paths, allowing simultaneous instruction fetch and data access. The CPU executes most instructions in one cycle, delivering 16 MIPS at 32MHz. The 24-bit instruction width supports large immediate operands and a uniform addressing model across the entire memory map. A peripheral pin-select (PPS) feature on related parts is not present here, but the device still offers flexible peripheral mapping within its 28-pin envelope. Typical applications include industrial sensor nodes, USB device controllers (with on-chip USB 2.0 FS), home-automation gateways, low-power remote controls, battery-powered data loggers, motor-control fan drivers, and consumer white-goods user interfaces. The 28-pin SOIC package is easy to hand-solder and breadboard-friendly for prototyping, while remaining compatible with high-volume SMT lines. When designing with this device, allocate sufficient decoupling (100nF plus 10uF bulk) close to VDD/AVDD pins. The PIC24FJ64GA002 supports a wide 2.0V-3.6V supply range, but the ADC accuracy is best at 3.3V; for 5V system interfaces, add level shifters on I/O lines. The internal 8MHz Fast RC oscillator can be trimmed using the FCR calibration register, allowing designs to operate without an external crystal in cost-sensitive applications. This page synthesizes distributor pricing, drop-in alternative parts in the same SOIC-28 footprint, and practical design notes not found in the manufacturer datasheet alone, helping engineers evaluate the PIC24FJ64GA002-I/SO for both new designs and as a drop-in replacement in legacy PIC24FJ designs.

Angebot Kontakt

PIC24FJ64GA002-I/SS

PIC24FJ64GA002-I/SS - 16-bit 64KB Flash 32MHz MCU | Microchip

The Microchip PIC24FJ64GA002-I/SS is a 16-bit microcontroller from the PIC24F family, offering 64 KB of Flash program memory, 8 KB of RAM, and a maximum CPU speed of 32 MHz, packaged in a 28-pin SSOP (5.30 mm body width, 0.65 mm pitch). It integrates a 16-channel 10-bit ADC, multiple UART/SPI/I2C peripherals, five 16-bit timers, and the nanoWatt Technology power-management feature set for ultra-low sleep current. A 16-bit microcontroller is a programmable embedded controller that uses a 16-bit data path, instruction word, and register file to deliver noticeably higher arithmetic throughput than 8-bit MCUs while retaining deterministic real-time interrupt behaviour. PIC24F devices sit in Microchip's mid-range 16-bit portfolio above the PIC16 and PIC18 8-bit families, with the PIC24F sub-family focused on low-power general-purpose applications rather than the dsPIC33 DSP-enhanced line. They are widely used as glue logic, sensor hubs, and human-interface controllers in cost-sensitive industrial and consumer products. Key features of the PIC24FJ64GA002 include: 64 KB (22K x 24) Flash, 8 KB RAM, sixteen 10-bit ADC channels, two UART, two SPI, one I2C, five 16-bit timers, two analog comparators, a charge time measurement unit (CTMU), and a real-time clock calendar (RTCC). The nanoWatt Technology suite provides multiple idle and sleep modes with sub-microamp sleep current, making the part well suited to battery-powered sensor nodes. The 28-SSOP footprint is pin-compatible with the dsPIC33FJ64GP202 device family and shares substantial pinout overlap with the PIC18F46J11. The CPU is built around Microchip's modified Harvard architecture with a 16-bit datapath and 24-bit instructions. Code executes from internal Flash with single-cycle multiply support, and peripheral pin select (PPS) lets designers remap digital functions to a wide choice of I/O pads, simplifying PCB layout. A wide operating voltage range from 2.0 V to 3.6 V allows direct connection to single-cell Li-ion or two-AA battery chemistries. Typical applications include USB-device/embedded host controllers (with external transceiver), sensor interface boards for HVAC and industrial monitoring, low-power data loggers, simple user-interface panels, and consumer appliances where 8-bit headroom is insufficient. For battery-powered designs, the part's nanoWatt features allow months of standby life on a small cell. When designing with this MCU, ensure decoupling: place a 0.1 µF ceramic on each VDD pin within 2 mm, and verify that all VSS pins are connected - even one floating VSS may cause programming failure. Use Microchip's MPLAB X IDE with the XC16 compiler for full peripheral library support. This page synthesizes distributor pricing, drop-in SSOP-28 alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers shortlist a 16-bit PIC24F platform faster.

Angebot Kontakt

Unterkategorien

Produkte (32836)

PIC24FJ512GL408-I/PT - 512KB Flash 16-bit LCD MCU | Microchip

PIC24FJ512GL408T-I/PT - 16-bit 32MHz 512KB Flash MCU 80-TQFP

PIC24FJ512GL410-E/PT - 16-bit 32MHz 512KB Flash MCU | Microchip

PIC24FJ512GL410-I/PT - 512KB Flash 16-bit MCU | Microchip

PIC24FJ512GL410T-I/PT - 16-Bit 32MHz 512KB Flash MCU | Microchip

PIC24FJ512GU405-I/M4 - 16-Bit 512KB Flash MCU w/ USB & LCD | Microchip

PIC24FJ512GU405-I/PT - 16-bit MCU 512KB Flash USB/LCD 48-TQFP | Microchip

PIC24FJ512GU405T-I/M4 - 512KB Flash USB MCU | Microchip | 48-UQFN

PIC24FJ512GU406-E/MR - 16-bit MCU 512KB Flash USB LCD 64-QFN

PIC24FJ512GU406-E/PT - 16-Bit MCU, 512KB Flash, USB, LCD | Microchip

PIC24FJ512GU406-I/MR - 512KB Flash 16-bit MCU USB LCD | Microchip

PIC24FJ512GU406-I/PT - 16-Bit 32MHz 512KB Flash MCU with USB & LCD | Microchip

PIC24FJ512GU406T-I/PT - 512KB Flash, USB, 16-bit MCU | Microchip

PIC24FJ512GU408-E/PT - 16-Bit 32MHz 512KB USB MCU | Microchip

PIC24FJ512GU408-I/PT - 16-bit 32MHz 512KB Flash MCU | Microchip

PIC24FJ512GU410-E/PT - 512KB Flash USB LCD MCU | Microchip

PIC24FJ512GU410-I/PT - 512KB Flash, USB, LCD 16-bit MCU | Microchip

PIC24FJ512GU410T-I/PT - 512KB Flash USB MCU 100-TQFP | Microchip

PIC24FJ64GA002-E/ML - 16-bit 32MHz 64KB Flash MCU | Microchip

PIC24FJ64GA002-E/SO - 16-bit 32MHz 64KB Flash MCU | Microchip

PIC24FJ64GA002-E/SP - 16-bit MCU 64KB Flash 28-SPDIP | Microchip

PIC24FJ64GA002-I/ML - 16-bit MCU, 64KB Flash, 28-QFN | Microchip

PIC24FJ64GA002-I/SO - 16-bit 32MHz 64KB Flash MCU | Microchip

PIC24FJ64GA002-I/SS - 16-bit 64KB Flash 32MHz MCU | Microchip