Integrierte Schaltungen

Unterkategorien

📁 ADC/DAC 3.100+ Produkte 📁 Verstärker-ICs 1.900+ Produkte 📁 Audio-Codecs 18 Produkte 📁 Audio-ICs 2 Produkte 📁 Takt & Timing 660+ Produkte 📁 Comparator ICs 1 Produkte 📁 DSP 1.100+ Produkte 📁 Datenakquise-ICs 2 Produkte 📁 Digitale Potentiometer 4 Produkte 📁 Display-Treiber & -Controller 1 Produkte 📁 FPGA & CPLD 7.300+ Produkte 📁 Schnittstellen-ICs 3.300+ Produkte 📁 LED-Treiber 1 Produkte 📁 Logik-ICs 460+ Produkte 📁 Speicher-ICs 870+ Produkte 📁 Mikrocontroller 20.000+ Produkte 📁 Mikroprozessoren 4 Produkte 📁 Motortreiber 1 Produkte 📁 Sonstiges 1 Produkte 📁 Sensor and Detector Interfaces 1 Produkte 📁 Spezialisierte ICs 15 Produkte 📁 Video-ICs 14 Produkte

Produkte (39.000+)

STM32F103T4U6A - 72MHz Cortex-M3 MCU | STMicroelectronics
STM32F103T4U6A

STM32F103T4U6A - 72MHz Cortex-M3 MCU | STMicroelectronics

STMicroelectronics STM32F103T4U6A is an ARM Cortex-M3 32-bit RISC microcontroller rated at up to 72 MHz, with 16 KB of Flash memory and a 36-pin VFQFPN package measuring 6 mm by 6 mm. It belongs to the STM32F103x4 and STM32F103x6 performance-line family, combining a compact-memory profile with general-purpose embedded-control capabilities. The device is designed for industrial, medical, and consumer applications where a compact surface-mount controller and a defined peripheral set are required. A microcontroller is a semiconductor integrated circuit that combines a processor core, memory, and peripherals on one package. In the device hierarchy, the STM32F103T4U6A is a 32-bit RISC microcontroller based on the ARM Cortex-M3 core, within the broader category of embedded processors and system semiconductors. This integration allows a controller to execute firmware, read program data, acquire analog or digital inputs, and control external outputs without requiring several separate logic devices. The STM32F103T4U6A's headline characteristics are its 72 MHz operating frequency, 16 KB Flash memory, 32-bit ARM Cortex-M3 architecture, and 36-pin VFQFPN package. The 6 mm by 6 mm package supports compact PCB layouts, while the 72 MHz core provides higher instruction throughput than slower general-purpose microcontroller options. The manufacturer identifies the device as part of the STM32F103x4 and STM32F103x6 performance-line family. The STM32F103 architecture is organized around an ARM Cortex-M3 processor and an integrated peripheral set. Its 16 KB Flash provides on-chip program storage, eliminating the need for an external program-memory device in compact designs. The exact RAM capacity, pin-level peripheral assignments, voltage limits, and electrical characteristics should be confirmed in the manufacturer datasheet before schematic capture or PCB release because those values are not enumerated on the manufacturer product-page listing. Typical uses for this controller family include compact data-acquisition modules, industrial control products, medical equipment, and consumer devices. The device can serve as the central controller in a sensor node, actuator controller, communications gateway, or compact instrumentation product. Firmware choice should match the required GPIO count, communication peripherals, memory capacity, timing behavior, and operating conditions rather than relying on broad category equivalence alone. PCB planning should begin with the 36-pin VFQFPN land pattern, exposed-pad requirements, and the manufacturer's pin-definition table. Place decoupling capacitors close to the supply pins, preserve the recommended thermal-pad geometry, and route sensitive analog or communication signals away from fast-switching nodes. The package's small 6 mm by 6 mm footprint makes careful assembly planning and solder-paste control important for manufacturing yield. This page consolidates the exact MPN, package identity, core architecture, memory size, sourcing context, candidate replacements, and practical design considerations into one engineering-focused reference. For production selection, verify the ordered suffix, pinout, electrical limits, lifecycle status, firmware support, and qualification requirements directly against the current manufacturer documentation before releasing a BOM.

Angebot Kontakt
STM32F103T6U6 - 72MHz Cortex-M3 32KB MCU | STMicroelectronics
STM32F103T6U6

STM32F103T6U6 - 72MHz Cortex-M3 32KB MCU | STMicroelectronics

The STMicroelectronics STM32F103T6U6 is a 32-bit ARM Cortex-M3 microcontroller operating up to 72 MHz, with 32 KB of Flash memory, 10 KB of SRAM, USB, CAN, and mixed-signal peripherals in an LQFP-48 package. It belongs to the low-density STM32F103 performance-line family and combines a 32-bit RISC core, 37 I/O ports, two ADCs, six timers, and six communication interfaces for compact embedded control systems. A microcontroller, or MCU, integrates a processor core, program memory, volatile data memory, and peripherals such as timers, serial interfaces, analog converters, and GPIO into one package. Within the semiconductor hierarchy, the STM32F103T6U6 is an embedded microcontroller, a Cortex-M processor-based system-on-chip, and a member of the broader power management and industrial-control component category. Its integrated design reduces external component count while providing deterministic control for motor, communications, and instrumentation applications. The verified device data identifies an ARM Cortex-M3 core with a maximum operating frequency of 72 MHz, 32 KB of Flash, 10 KB of SRAM, and six timers. Two 12-bit ADCs are included for analog measurement, while USB and CAN interfaces support direct connectivity and industrial network communication. The listed 2 V to 3.6 V supply range supports conventional embedded systems operating from regulated 2.5 V or 3.3 V rails. The STM32F103T6U6 is positioned as a low-density performance-line MCU rather than a high-pin-count Cortex-M4 device. This makes it appropriate for designs that need more control capability than a basic 8-bit or low-performance 32-bit MCU without paying for the memory and peripheral resources of a larger controller. Its six timers can support timing, PWM, input capture, encoder, and motor-control functions, while the communication interfaces reduce the need for separate protocol devices. Typical uses include USB-connected data acquisition, CAN-connected industrial controllers, compact motor-control boards, and low-cost embedded instruments. For CAN equipment, the controller is placed on the same board as a CAN transceiver; for USB equipment, it connects to a USB transceiver through the MCU’s internal USB controller. The ADC channels can monitor sensors, potentiometers, or analog process inputs where 12-bit resolution and conversion throughput are sufficient. PCB design should preserve clean supply distribution, ground continuity, analog-input routing, and exposed-pad or thermal-pad handling appropriate to the exact LQFP-48 land pattern. Firmware should also account for the difference between a 72 MHz maximum clock and lower operating frequencies during initialization, power management, and peripheral timing. This page consolidates verified source data, substitution limits, and engineering guidance rather than presenting unverified substitute parts as unconditional drop-ins.

Angebot Kontakt
STM32F103T6U6A - 72MHz Cortex-M3 32KB MCU | STMicroelectronics
STM32F103T6U6A

STM32F103T6U6A - 72MHz Cortex-M3 32KB MCU | STMicroelectronics

The STMicroelectronics STM32F103T6U6A is a 32-bit ARM Cortex-M3 microcontroller operating at 72 MHz, with 32 KB of Flash memory, in a 36-pin VFQFPN package measuring 6 x 6 mm. The device is designed for embedded control applications requiring a compact surface-mount package, high-performance RISC processing, and embedded STM32F1-series integration. A microcontroller is a programmable semiconductor that combines a processor core, memory, peripherals, and communication interfaces on one integrated circuit. The STM32 family belongs to the embedded microcontroller hierarchy and supports industrial control, communications, motor-control, and consumer-product designs. Its Cortex-M3 core provides 32-bit instruction execution, while the integrated flash stores firmware and application code. The verified STM32F103T6U6A specifications identify a maximum clock frequency of 72 MHz, 32 KB of programmable Flash organized as 32K x 8, and a 36-pin VFQFPN package with dimensions of 6 x 6 mm. Arrow additionally identifies the supported supply condition as 2.5 V and 3.3 V. Its compact package is suitable for space-constrained control boards where a smaller alternative to larger 48-pin and 64-pin MCU packages is needed. The STM32F103 performance line combines an ARM Cortex-M3 core with embedded peripherals for real-time embedded systems. Because the verified distributor data confirms the core, clock, memory, package, and supply-condition information but does not expose the complete peripheral list, the exact peripheral configuration should be checked against the manufacturer datasheet before final PCB or firmware release. Firmware migration also requires attention to STM32 peripheral initialization, clock settings, and package-level pin assignments. Typical uses include industrial automation modules, motor-control controllers, CAN or RS-485 communication equipment, sensor-hub boards, and compact embedded instrumentation. The 72 MHz Cortex-M3 core supports responsive control tasks, while the 32 KB Flash capacity provides a practical code budget for focused applications rather than large graphical user interfaces or high-capacity firmware images. When designing around the STM32F103T6U6A, verify the exposed-pad connection, all 36 package pins, supported operating-temperature grade, decoupling requirements, and the exact peripheral mapping against the official STMicroelectronics product documentation. Production firmware should also be validated for the intended clock tree, communication baud rates, timing margins, and low-power behavior. This product data consolidates verified distributor specifications, official manufacturer references, drop-in ordering alternatives, pricing context, and practical engineering guidance. It adds selection and PCB-oriented context beyond the raw distributor listing while explicitly identifying information that still requires confirmation from the manufacturer datasheet.

Angebot Kontakt
STM32F103T6U7A - 72MHz Cortex-M3 MCU | STMicroelectronics
STM32F103T6U7A

STM32F103T6U7A - 72MHz Cortex-M3 MCU | STMicroelectronics

STMicroelectronics STM32F103T6U7A is a 32-bit ARM Cortex-M3 microcontroller with a 72 MHz operating frequency, 32 KB of flash memory, and a 36-pin VFQFPN surface-mount package measuring 6 x 6 mm. It belongs to the STM32F1 performance-line family and combines a high-frequency RISC core with embedded Flash, SRAM, USB, CAN, timers, ADCs, and communication peripherals in one compact device. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and interface circuitry into a single package. The STM32F103 product family sits within the broader embedded-control hierarchy of ARM Cortex-M3 devices, general-purpose microcontrollers, and integrated circuits. Its combination of 72 MHz processing, USB, CAN, and mixed-signal peripherals makes it suitable for control, communications, and data-acquisition equipment where a small package and broad peripheral integration are important. The supplied manufacturer and distributor information identifies the STM32F103T6U7A as a 72 MHz Cortex-M3 device with 32 KB flash, 37 I/O ports, USB, CAN, six timers, two ADCs, and six communication interfaces. A 2.0 V to 3.6 V supply range allows operation from standard low-voltage rails, while the 36-VFQFPN package supports compact surface-mount designs. These characteristics suit industrial controllers, USB-connected instruments, CAN nodes, and embedded automation products. The ARM Cortex-M3 core provides a 32-bit RISC architecture with an operating frequency of 72 MHz. The STM32F1 family also includes dedicated resources for USB and CAN communication, multiple timer channels, and two analog-to-digital converters, reducing the need for external peripheral components. The 37 reported I/O ports provide connectivity for sensors, actuators, human-interface controls, and communication transceivers, although engineers must confirm the exact exposed-pin allocation before finalizing a PCB. Typical STM32F103T6U7A applications include USB data acquisition, CAN-connected industrial equipment, motor and motion control, instrumentation, and compact embedded controllers. In a CAN node, the MCU can process sensor information and manage protocol traffic while timers provide timing functions. In a USB instrument, the integrated USB interface can reduce external connectivity requirements, while the two ADCs support analog measurement channels. A critical design consideration is PCB footprint validation. The verified distributor description identifies a 36-pin VFQFPN in a 6 x 6 mm format with an exposed pad, but the supplied data does not provide the complete numbered pin map or pad dimensions. Confirm the exact land pattern, exposed-pad geometry, pin names, and solder-mask requirements against the official STMicroelectronics package documentation before fabrication. This product record combines manufacturer positioning, distributor specifications, lifecycle information, package data, sourcing links, alternative-device guidance, and application-focused engineering notes. That synthesis adds practical context beyond a distributor listing while clearly distinguishing verified facts from parameters that still require confirmation from the manufacturer datasheet.

Angebot Kontakt
STM32F103T8U6 - 72MHz Cortex-M3 64KB Flash MCU | ST
STM32F103T8U6

STM32F103T8U6 - 72MHz Cortex-M3 64KB Flash MCU | ST

The STMicroelectronics STM32F103T8U6 is a 32-bit ARM Cortex-M3 microcontroller running at up to 72 MHz with 64 KB of Flash memory, 20 KB of SRAM, and 26 GPIO, housed in a 36-pin VFQFPN (6x6 mm) package with exposed pad. A microcontroller unit (MCU) integrates a processor core, memory, and peripherals on a single die, sitting at the heart of the embedded-system hierarchy: MCU -> embedded controller -> electronic system. The STM32F1 family belongs to ST's medium-density performance line of ARM-based 32-bit MCUs, widely used where deterministic real-time control and low cost are required. Key features include 1.25 DMIPS/MHz Cortex-M3 performance at 0-wait-state memory access, single-cycle multiplication and hardware division, 64 KB embedded Flash, and rich connectivity: CAN 2.0B, I2C, SPI, UART/USART, USB 2.0 full-speed, and IrDA/LIN support. Peripheral set includes DMA, motor-control PWM timers, PDR/POR/PVD reset functions, watchdogs, and a temperature sensor. Architecturally, the Cortex-M3 core with its nested vectored interrupt controller (NVIC) provides deterministic 12-cycle interrupt latency, essential for motor control and communication stacks. The medium-density memory map supports Flash access at 0 wait states up to 24 MHz with prefetch buffer for higher frequencies. Typical applications are industrial automation nodes, BLDC motor control drives, USB/CAN communication boards, and low-cost development platforms such as the original Maple and Arduino-compatible boards. Design consideration: the VFQFPN-36 exposed pad must be soldered to a ground plane for thermal and signal-integrity performance; hand rework of QFN packages requires hot-air tooling. This page synthesizes distributor availability data, drop-in alternatives such as GD32F103T8U6, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt
STM32F103T8U6TR - 72MHz Cortex-M3 64KB Flash MCU | ST (Tape & Reel)
STM32F103T8U6TR

STM32F103T8U6TR - 72MHz Cortex-M3 64KB Flash MCU | ST (Tape & Reel)

The STMicroelectronics STM32F103T8U6TR is a 32-bit ARM Cortex-M3 microcontroller running at up to 72 MHz with 64 KB of Flash memory, 20 KB of SRAM, and 26 GPIO, housed in a 36-pin VFQFPN (6x6 mm) package with exposed pad. A microcontroller unit (MCU) integrates a processor core, memory, and peripherals on a single die, sitting at the heart of the embedded-system hierarchy: MCU -> embedded controller -> electronic system. The STM32F1 family belongs to ST's medium-density performance line of ARM-based 32-bit MCUs, widely used where deterministic real-time control and low cost are required. Key features include 1.25 DMIPS/MHz Cortex-M3 performance at 0-wait-state memory access, single-cycle multiplication and hardware division, 64 KB embedded Flash, and rich connectivity: CAN 2.0B, I2C, SPI, UART/USART, USB 2.0 full-speed, and IrDA/LIN support. Peripheral set includes DMA, motor-control PWM timers, PDR/POR/PVD reset functions, watchdogs, and a temperature sensor. Architecturally, the Cortex-M3 core with its nested vectored interrupt controller (NVIC) provides deterministic 12-cycle interrupt latency, essential for motor control and communication stacks. The medium-density memory map supports Flash access at 0 wait states up to 24 MHz with prefetch buffer for higher frequencies. Typical applications are industrial automation nodes, BLDC motor control drives, USB/CAN communication boards, and low-cost development platforms such as the original Maple and Arduino-compatible boards. Design consideration: the VFQFPN-36 exposed pad must be soldered to a ground plane for thermal and signal-integrity performance; hand rework of QFN packages requires hot-air tooling. This page synthesizes distributor availability data, drop-in alternatives such as GD32F103T8U6, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt
STM32F103T8U7 - 72MHz Cortex-M3 64KB MCU | STMicroelectronics
STM32F103T8U7

STM32F103T8U7 - 72MHz Cortex-M3 64KB MCU | STMicroelectronics

The STMicroelectronics STM32F103T8U7 is a 32-bit Arm Cortex-M3 RISC microcontroller operating at 72 MHz, with 64 KB of Flash memory and a 36-pin VFQFPN package measuring 6 x 6 mm. It belongs to the STM32F1 medium-density performance line and is positioned for embedded control, communications, and mixed-signal applications. A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, peripherals, and communication interfaces on one semiconductor device. The STM32F103T8U7 uses the Arm Cortex-M3 architecture, which supports efficient real-time instruction execution. Its 72 MHz operating frequency provides a substantial performance increase over many lower-frequency 8-bit and 16-bit control solutions while retaining a broad embedded peripheral ecosystem. Verified product information identifies 64 KB of Flash memory, USB, CAN, and LIN support, and a 36-VFQFPN package. The STM32F103 family also provides timer and mixed-signal resources suitable for motor control, sensor acquisition, communications, and general-purpose embedded products. The U7 ordering code and tray packaging identify this specific commercial configuration, but electrical limits, SRAM capacity, peripheral details, and operating-temperature data should be confirmed in the manufacturer datasheet before final design release. The STM32F103T8U7 is appropriate for industrial controllers, communication modules, USB peripherals, motor-control systems, and compact control platforms. Its 64 KB Flash capacity provides room for boot code, application firmware, and configuration data, although memory planning must include bootloader, protocol stack, and application overhead. The 6 x 6 mm VFQFPN land pattern also requires careful exposed-pad layout and thermal management. For PCB implementation, follow the manufacturer footprint and exposed-pad recommendations, provide clean supply decoupling, and keep high-current return paths physically short. Firmware should account for clock configuration, peripheral initialization, reset behavior, and any required migration from another STM32F1 variant. This page summarizes verified distributor and manufacturer information while clearly separating confirmed values from parameters requiring datasheet confirmation.

Angebot Kontakt
STM32F103T8U7TR - 72MHz Cortex-M3 64KB MCU | STMicroelectronics (Tape & Reel)
STM32F103T8U7TR

STM32F103T8U7TR - 72MHz Cortex-M3 64KB MCU | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F103T8U7TR is a 32-bit Arm Cortex-M3 RISC microcontroller operating at 72 MHz, with 64 KB of Flash memory and a 36-pin VFQFPN package measuring 6 x 6 mm. It belongs to the STM32F1 medium-density performance line and is positioned for embedded control, communications, and mixed-signal applications. A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, peripherals, and communication interfaces on one semiconductor device. The STM32F103T8U7TR uses the Arm Cortex-M3 architecture, which supports efficient real-time instruction execution. Its 72 MHz operating frequency provides a substantial performance increase over many lower-frequency 8-bit and 16-bit control solutions while retaining a broad embedded peripheral ecosystem. Verified product information identifies 64 KB of Flash memory, USB, CAN, and LIN support, and a 36-VFQFPN package. The STM32F103 family also provides timer and mixed-signal resources suitable for motor control, sensor acquisition, communications, and general-purpose embedded products. The U7 ordering code and tray packaging identify this specific commercial configuration, but electrical limits, SRAM capacity, peripheral details, and operating-temperature data should be confirmed in the manufacturer datasheet before final design release. The STM32F103T8U7TR is appropriate for industrial controllers, communication modules, USB peripherals, motor-control systems, and compact control platforms. Its 64 KB Flash capacity provides room for boot code, application firmware, and configuration data, although memory planning must include bootloader, protocol stack, and application overhead. The 6 x 6 mm VFQFPN land pattern also requires careful exposed-pad layout and thermal management. For PCB implementation, follow the manufacturer footprint and exposed-pad recommendations, provide clean supply decoupling, and keep high-current return paths physically short. Firmware should account for clock configuration, peripheral initialization, reset behavior, and any required migration from another STM32F1 variant. This page summarizes verified distributor and manufacturer information while clearly separating confirmed values from parameters requiring datasheet confirmation.

Angebot Kontakt
STM32F103TBU6 - 72MHz Cortex-M3 MCU, 128KB Flash | STMicroelectronics
STM32F103TBU6

STM32F103TBU6 - 72MHz Cortex-M3 MCU, 128KB Flash | STMicroelectronics

The STMicroelectronics STM32F103TBU6 is a 32-bit Arm Cortex-M3 microcontroller operating at 72 MHz, with 128 KB of Flash memory and a 36-pin UFQFPN package measuring 6 x 6 mm. It belongs to the STM32F1 medium-density performance line and integrates USB, CAN, two 12-bit ADCs, seven timers, PWM capability, and nine communication interfaces for compact embedded control designs. A microcontroller, or MCU, integrates a processor core, memory, peripherals, and interface circuitry on one semiconductor device. The STM32F103TB is an Arm Cortex-M3 RISC MCU within the STM32 family, combining general-purpose embedded processing with analog measurement, timing, serial communications, and motor-control resources. Its UFQFPN surface-mount package supports compact PCB layouts while retaining a substantial pin count for external memory, sensors, actuators, and communications. Principal features include a 72 MHz maximum operating frequency, 128 KB Flash, two 12-bit ADCs, three general-purpose 16-bit timers, an additional PWM timer, USB, CAN, and nine communication interfaces. These resources allow the STM32F103TBU6 to handle control loops, data acquisition, protocol bridging, and peripheral supervision without requiring separate logic devices. The 36-pin package provides access to the mixed-signal and communication resources required by embedded systems. The STM32F103TBU6 uses a 32-bit Arm Cortex-M3 RISC core and belongs to STMicroelectronics' medium-density performance line. Its combination of 128 KB Flash and 72 MHz operation provides useful headroom for protocol stacks and real-time control firmware. Two ADCs support analog measurements, while the timer and PWM resources are appropriate for motor, lighting, and general timing functions. USB and CAN connectivity enables direct host-device or industrial network implementations. Typical applications include USB-connected data loggers, CAN-based industrial controllers, motor-control boards, sensor-acquisition systems, and compact embedded instruments. Designers can use the two ADCs for analog inputs, the communication interfaces for host or network links, and the timers for precise periodic or PWM functions. The same 6 x 6 mm package also makes it suitable for space-constrained control modules where a smaller MCU with fewer pins would be insufficient. When laying out the PCB, place the MCU's decoupling capacitors and analog-supply components according to the manufacturer's reference layout, and route sensitive analog inputs away from fast digital and communication signals. Firmware should account for the 72 MHz clock, peripheral initialization sequence, and any external peripheral requirements. If GD32F103TBU6 is considered as a second source, validate clock wait states, Flash behavior, ADC characteristics, and peripheral differences in hardware. This page consolidates verified distributor pricing, manufacturer specifications, package information, strict same-package alternatives, and practical migration guidance. It also identifies missing datasheet details rather than estimating them, providing engineers with a source for initial design review, sourcing, and replacement planning.

Angebot Kontakt
STM32F103TBU6TR - 72MHz Cortex-M3 MCU, 128KB Flash | STMicroelectronics (Tape & Reel)
STM32F103TBU6TR

STM32F103TBU6TR - 72MHz Cortex-M3 MCU, 128KB Flash | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F103TBU6TR is a 32-bit Arm Cortex-M3 microcontroller operating at 72 MHz, with 128 KB of Flash memory and a 36-pin UFQFPN package measuring 6 x 6 mm. It belongs to the STM32F1 medium-density performance line and integrates USB, CAN, two 12-bit ADCs, seven timers, PWM capability, and nine communication interfaces for compact embedded control designs. A microcontroller, or MCU, integrates a processor core, memory, peripherals, and interface circuitry on one semiconductor device. The STM32F103TB is an Arm Cortex-M3 RISC MCU within the STM32 family, combining general-purpose embedded processing with analog measurement, timing, serial communications, and motor-control resources. Its UFQFPN surface-mount package supports compact PCB layouts while retaining a substantial pin count for external memory, sensors, actuators, and communications. Principal features include a 72 MHz maximum operating frequency, 128 KB Flash, two 12-bit ADCs, three general-purpose 16-bit timers, an additional PWM timer, USB, CAN, and nine communication interfaces. These resources allow the STM32F103TBU6TR to handle control loops, data acquisition, protocol bridging, and peripheral supervision without requiring separate logic devices. The 36-pin package provides access to the mixed-signal and communication resources required by embedded systems. The STM32F103TBU6TR uses a 32-bit Arm Cortex-M3 RISC core and belongs to STMicroelectronics' medium-density performance line. Its combination of 128 KB Flash and 72 MHz operation provides useful headroom for protocol stacks and real-time control firmware. Two ADCs support analog measurements, while the timer and PWM resources are appropriate for motor, lighting, and general timing functions. USB and CAN connectivity enables direct host-device or industrial network implementations. Typical applications include USB-connected data loggers, CAN-based industrial controllers, motor-control boards, sensor-acquisition systems, and compact embedded instruments. Designers can use the two ADCs for analog inputs, the communication interfaces for host or network links, and the timers for precise periodic or PWM functions. The same 6 x 6 mm package also makes it suitable for space-constrained control modules where a smaller MCU with fewer pins would be insufficient. When laying out the PCB, place the MCU's decoupling capacitors and analog-supply components according to the manufacturer's reference layout, and route sensitive analog inputs away from fast digital and communication signals. Firmware should account for the 72 MHz clock, peripheral initialization sequence, and any external peripheral requirements. If GD32F103TBU6 is considered as a second source, validate clock wait states, Flash behavior, ADC characteristics, and peripheral differences in hardware. This page consolidates verified distributor pricing, manufacturer specifications, package information, strict same-package alternatives, and practical migration guidance. It also identifies missing datasheet details rather than estimating them, providing engineers with a source for initial design review, sourcing, and replacement planning.

Angebot Kontakt
STM32F103TBU7 - 72MHz Cortex-M3 128KB MCU | STMicroelectronics
STM32F103TBU7

STM32F103TBU7 - 72MHz Cortex-M3 128KB MCU | STMicroelectronics

The STMicroelectronics STM32F103TBU7 is an ARM Cortex-M3 32-bit microcontroller with a 72 MHz maximum operating frequency, 128 KB of Flash memory, and a 36-VFQFPN package measuring 6 x 6 mm. It belongs to the STM32F1 medium-density performance line and integrates USB, CAN, timers, ADCs, and communication peripherals for embedded control, communications, and vehicle-gateway applications. A microcontroller is a semiconductor device that combines a processor core, memory, and peripherals into one embedded-computing component. In the system hierarchy, this device is an MCU, an embedded processor, and ultimately an integrated circuit. The STM32F103TBU7 uses an ARM Cortex-M3 core capable of 1.25 DMIPS per MHz at zero-wait-state memory access, providing a practical balance of processing performance, memory capacity, and peripheral integration. Key features include a 32-bit ARM Cortex-M3 processor, 72 MHz maximum frequency, 128 KB Flash memory, hardware USB and CAN support, seven timers, two ADCs, and nine communication interfaces. Its 128 KB Flash supports stored firmware and application code, while the communication peripherals enable connected embedded systems without requiring separate interface controllers. The 36-VFQFPN package also exposes an exposed pad according to the provided product result, supporting compact surface-mount designs. The STM32F103 family is positioned for medium-density embedded applications where USB, CAN, timing, analog conversion, and serial communications are useful. The MCU is suitable for industrial modules, vehicle gateway nodes, CAN or LIN control networks, motor-control equipment, instrumentation, and communication boards. Its 72 MHz operating limit should be considered alongside clock configuration, peripheral timing, memory wait states, and thermal requirements. For PCB design, use the manufacturer datasheet and package drawing for the exact exposed-pad connection, pin numbering, and recommended land pattern. The verified web results identify the package as 36-VFQFPN (6 x 6 mm), but the complete public pin assignment and electrical limits must be confirmed from the manufacturer datasheet before layout or firmware release. This page consolidates the verified distributor and manufacturer-linked product information, practical application guidance, and a conservative drop-in replacement assessment. The provided search data confirms the core identity and package, while missing detailed electrical, pin-level, price, and lifecycle parameters are marked for data completion rather than guessed.

Angebot Kontakt
STM32F103V8H6 - 72MHz 64KB Cortex-M3 MCU | STMicroelectronics
STM32F103V8H6

STM32F103V8H6 - 72MHz 64KB Cortex-M3 MCU | STMicroelectronics

The STMicroelectronics STM32F103V8H6 is a 32-bit Arm Cortex-M3 microcontroller operating at 72 MHz, with 64 KB of embedded Flash memory and a 100-LFBGA package. It is designed for embedded control applications requiring a high-performance processor core, integrated serial communications, analog conversion, timers, and a broad set of general-purpose I/O. The supplied distributor data identifies the part as a 64 KB Flash STM32F1-series MCU, while the manufacturer describes the STM32F103V8 family as a medium-density performance-line device with high-speed embedded memory and enhanced peripherals connected to two APB buses. A microcontroller, or MCU, is a semiconductor device that integrates a CPU core, memory, peripherals, and I/O into one package. The STM32F103V8H6 belongs to the STM32F103 medium-density performance line and uses the Arm Cortex-M3 32-bit RISC architecture. This hierarchy places it within embedded processors, then microcontrollers, and finally general-purpose semiconductor components. Its integrated design reduces the number of external components required for control, measurement, communication, and timing functions. Key verified attributes include an Arm Cortex-M3 core, a maximum clock frequency of 72 MHz, 64 KB Flash memory, two 12-bit ADCs, three general-purpose 16-bit timers according to the manufacturer family description, and a broad selection of communication interfaces. The family description also identifies high-speed embedded memories and enhanced I/O, making the device suitable for compact control systems that need deterministic peripheral performance. The verified distributor listing identifies the package as 100-LFBGA; a separate comparison listing describes the package as 100LFBGA. The STM32F103V8H6 is suitable for industrial control modules, motor-control systems, communication equipment, instrumentation, and connected embedded products. Its 72 MHz processing rate supports responsive control loops and protocol handling, while the ADC resources are useful for sensor acquisition and process monitoring. The two APB-bus architecture provides an organized connection between the processor core and peripherals, helping designers separate bus activity and simplify firmware configuration. For new PCB designs, the exact LFBGA footprint, pin assignment, power architecture, and exposed-pad requirements must be confirmed against the official STMicroelectronics documentation before layout. Firmware should also be validated against the selected peripheral configuration, clock plan, and toolchain. This page uses only values explicitly present in the supplied verified web data; unprovided specifications are marked as data-needed rather than inferred. This product page combines the verified manufacturer description, distributor identification, package data, datasheet links, pricing references, and engineering-oriented design guidance for engineers evaluating STM32F103V8H6.

Angebot Kontakt
STM32F103V8H6TR - 72MHz 64KB Cortex-M3 MCU | STMicroelectronics (Tape & Reel)
STM32F103V8H6TR

STM32F103V8H6TR - 72MHz 64KB Cortex-M3 MCU | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F103V8H6TR is a 32-bit Arm Cortex-M3 microcontroller operating at 72 MHz, with 64 KB of embedded Flash memory and a 100-LFBGA package. It is designed for embedded control applications requiring a high-performance processor core, integrated serial communications, analog conversion, timers, and a broad set of general-purpose I/O. The supplied distributor data identifies the part as a 64 KB Flash STM32F1-series MCU, while the manufacturer describes the STM32F103V8 family as a medium-density performance-line device with high-speed embedded memory and enhanced peripherals connected to two APB buses. A microcontroller, or MCU, is a semiconductor device that integrates a CPU core, memory, peripherals, and I/O into one package. The STM32F103V8H6TR belongs to the STM32F103 medium-density performance line and uses the Arm Cortex-M3 32-bit RISC architecture. This hierarchy places it within embedded processors, then microcontrollers, and finally general-purpose semiconductor components. Its integrated design reduces the number of external components required for control, measurement, communication, and timing functions. Key verified attributes include an Arm Cortex-M3 core, a maximum clock frequency of 72 MHz, 64 KB Flash memory, two 12-bit ADCs, three general-purpose 16-bit timers according to the manufacturer family description, and a broad selection of communication interfaces. The family description also identifies high-speed embedded memories and enhanced I/O, making the device suitable for compact control systems that need deterministic peripheral performance. The verified distributor listing identifies the package as 100-LFBGA; a separate comparison listing describes the package as 100LFBGA. The STM32F103V8H6TR is suitable for industrial control modules, motor-control systems, communication equipment, instrumentation, and connected embedded products. Its 72 MHz processing rate supports responsive control loops and protocol handling, while the ADC resources are useful for sensor acquisition and process monitoring. The two APB-bus architecture provides an organized connection between the processor core and peripherals, helping designers separate bus activity and simplify firmware configuration. For new PCB designs, the exact LFBGA footprint, pin assignment, power architecture, and exposed-pad requirements must be confirmed against the official STMicroelectronics documentation before layout. Firmware should also be validated against the selected peripheral configuration, clock plan, and toolchain. This page uses only values explicitly present in the supplied verified web data; unprovided specifications are marked as data-needed rather than inferred. This product page combines the verified manufacturer description, distributor identification, package data, datasheet links, pricing references, and engineering-oriented design guidance for engineers evaluating STM32F103V8H6TR.

Angebot Kontakt
STM32F103V8T6 - ARM Cortex-M3 72MHz MCU 64KB Flash | ST
STM32F103V8T6

STM32F103V8T6 - ARM Cortex-M3 72MHz MCU 64KB Flash | ST

The STMicroelectronics STM32F103V8T6 is a 32-bit ARM Cortex-M3 microcontroller running at 72 MHz with 64 KB Flash and 20 KB SRAM, housed in a 100-pin LQFP (14 x 14 mm) package. A microcontroller (MCU) integrates a processor core, memory, and peripherals onto a single chip, forming the lowest layer of the embedded computing hierarchy below microprocessors and application processors. The STM32F1 Performance line belongs to ST's STM32 family of general-purpose MCUs, based on the ARM Cortex-M3 32-bit RISC core. Key features of the STM32F103V8T6 include the 72 MHz Cortex-M3 core, 64 KB on-chip Flash and 20 KB SRAM, two 12-bit ADCs, a USB 2.0 full-speed interface, a CAN 2.0B controller, and seven 16-bit timers per ST's official product description. The Cortex-M3 Harvard architecture delivers deterministic interrupt handling through the Nested Vectored Interrupt Controller, while the embedded Flash with prefetch buffer sustains full-speed core operation. The peripheral set spans multiple USART, SPI, and I2C interfaces, enabling rich connectivity within a single supply domain. Typical applications include industrial control boards, motor-control nodes, communication modules, and low-cost embedded platforms - markets where the STM32F103 line has been a default choice for over fifteen years. Designers should verify Flash wait-state configuration at 72 MHz (two wait states) and confirm second-source compatibility for clock and HAL settings when using drop-in substitutes. This page synthesizes distributor pricing, validated drop-in alternatives, and cross-reference guidance not found in the manufacturer datasheet, with pricing verified as of 2026-09-06.

Angebot Kontakt
STM32F103V8T6TR - ARM Cortex-M3 72MHz MCU 64KB Flash | ST (Tape & Reel)
STM32F103V8T6TR

STM32F103V8T6TR - ARM Cortex-M3 72MHz MCU 64KB Flash | ST (Tape & Reel)

The STMicroelectronics STM32F103V8T6TR is a 32-bit ARM Cortex-M3 microcontroller running at 72 MHz with 64 KB Flash and 20 KB SRAM, housed in a 100-pin LQFP (14 x 14 mm) package. A microcontroller (MCU) integrates a processor core, memory, and peripherals onto a single chip, forming the lowest layer of the embedded computing hierarchy below microprocessors and application processors. The STM32F1 Performance line belongs to ST's STM32 family of general-purpose MCUs, based on the ARM Cortex-M3 32-bit RISC core. Key features of the STM32F103V8T6TR include the 72 MHz Cortex-M3 core, 64 KB on-chip Flash and 20 KB SRAM, two 12-bit ADCs, a USB 2.0 full-speed interface, a CAN 2.0B controller, and seven 16-bit timers per ST's official product description. The Cortex-M3 Harvard architecture delivers deterministic interrupt handling through the Nested Vectored Interrupt Controller, while the embedded Flash with prefetch buffer sustains full-speed core operation. The peripheral set spans multiple USART, SPI, and I2C interfaces, enabling rich connectivity within a single supply domain. Typical applications include industrial control boards, motor-control nodes, communication modules, and low-cost embedded platforms - markets where the STM32F103 line has been a default choice for over fifteen years. Designers should verify Flash wait-state configuration at 72 MHz (two wait states) and confirm second-source compatibility for clock and HAL settings when using drop-in substitutes. This page synthesizes distributor pricing, validated drop-in alternatives, and cross-reference guidance not found in the manufacturer datasheet, with pricing verified as of 2026-09-06.

Angebot Kontakt
STM32F103VBH6 - 32-Bit 72MHz Cortex-M3 MCU | STMicroelectronics
STM32F103VBH6

STM32F103VBH6 - 32-Bit 72MHz Cortex-M3 MCU | STMicroelectronics

The STMicroelectronics STM32F103VBH6 is a 32-bit ARM Cortex-M3 microcontroller with a maximum clock frequency of 72 MHz, 128 KB of Flash memory, and 37 I/O ports, supplied in a 7 x 7 mm, 0.5 mm-pitch VFQFPN-48 package. It is a performance-line embedded MCU combining USB, CAN, seven 16-bit timers, two 12-bit ADCs, and multiple communication interfaces for compact control systems. A microcontroller is an integrated circuit that executes firmware, reads inputs, controls outputs, and manages embedded-system resources. The STM32F103VBH6 belongs to the MCU hierarchy: ARM Cortex-M3 microcontroller, 32-bit embedded processor, and programmable control device. Its combination of 72 MHz processing, 128 KB Flash, and USB and CAN support makes it suitable for industrial controls, communication equipment, data acquisition, and motor-control prototypes where several peripherals are required on one device. The verified device description identifies the part as a performance-line, ARM-based 32-bit MCU with Flash, USB, CAN, seven 16-bit timers, and two 12-bit, 1 microsecond ADC channels. The reported operating supply range is 2 V to 3.6 V, while one verified source also identifies RoHS compliance and an active lifecycle status. These features support low-voltage embedded designs that need high processing speed and integrated serial communications without requiring a separate external interface controller. The Cortex-M3 core and 72 MHz operating point provide a practical balance of control-loop performance, memory, and peripheral integration. USB and CAN support can reduce external component count in USB-connected control products and CAN-based industrial equipment. The two ADC channels and seven timers support sensor monitoring, timing, motor-control, and signal-generation functions, provided the selected peripheral pins and board-level analog circuitry are designed according to the manufacturer documentation. Typical applications include USB-to-digital monitoring systems, CAN-connected industrial controllers, embedded instrumentation, automation boards, and compact motor-control or timing platforms. The 48-pin package provides access to the MCU's available I/O, power, ground, analog, and communication functions, but pin assignments and exposed-pad requirements must be checked against the official STM32F103VBH6 datasheet before PCB release. A key design consideration is validating power, clock, decoupling, boot configuration, and signal routing on the selected board. Because the supplied verified data does not include complete electrical limits, pin names, or timing details, designers should not infer missing values; consult the manufacturer datasheet and package drawing for authoritative implementation requirements. This page combines verified distributor and source information with practical application context, procurement data, and replacement-source guidance. It is intended to help engineers identify the correct STM32 MCU, compare compatible sourcing options, and move quickly to datasheet-driven design validation.

Angebot Kontakt
STM32F103VBH7 - 72MHz Cortex-M3 MCU 128KB LFBGA-100 | STMicroelectronics
STM32F103VBH7

STM32F103VBH7 - 72MHz Cortex-M3 MCU 128KB LFBGA-100 | STMicroelectronics

The STMicroelectronics STM32F103VBH7 is a 32-bit ARM Cortex-M3 microcontroller operating at 72 MHz with 128 KB of embedded Flash memory, packaged in a 100-ball LFBGA (10x10 mm). It integrates 1.25 DMIPS/MHz performance (90 DMIPS total), a single-cycle hardware multiplier and divider, and a rich peripheral set: two 12-bit ADCs (1 us conversion), seven 16-bit timers, USB Full-Speed, CAN 2.0B, two I2C, three SPI, two I2S, three USART, two UART, one SDIO, and an FSMC interface for external memory. The supply voltage is 2.0 V to 3.6 V and the device provides 80 general-purpose I/O pins with interrupt capability. An ARM Cortex-M3 microcontroller (often shortened to MCU or simply "Cortex-M3") is a 32-bit RISC processor designed by Arm that targets deterministic, real-time embedded applications. Within the broader taxonomy, it sits under MCU (microcontroller) -> embedded processor -> semiconductor IC. The Cortex-M3 family is widely used in industrial control, motor drives, consumer electronics, and USB peripherals because it combines deterministic interrupt latency (typically 12 cycles) with low power consumption and a Thumb-2 instruction set that keeps code density comparable to 8-bit MCUs. STMicroelectronics' STM32F103 sub-family further extends this with the high-speed peripherals listed above. Key features of the STM32F103VBH7 include support for Sleep, Stop, and Standby low-power modes, an internal 8 MHz RC oscillator with PLL multipliers up to 9x (yielding 72 MHz), an embedded real-time clock (RTC) with calendar and alarm functions, and a 96-bit unique device ID. The two 12-bit ADCs each offer up to 16 input channels (12 on the LFBGA-100 package variant) and can be triggered by timers for precise sampling in motor-control loops. The USB Full-Speed device interface requires an external 1.5 k pull-up and integrates a dedicated 48 MHz PLL. Architecturally, the STM32F103VBH7 uses a multi-AHB bus matrix that allows the DMA controller, CPU, and peripherals to operate in parallel without contention. The NVIC (Nested Vectored Interrupt Controller) accepts up to 43 maskable interrupt sources with 16 priority levels, enabling deterministic response time for time-critical applications such as USB isochronous transfers and motor PWM. A 7-channel DMA controller supports peripherals including the ADCs, SPIs, I2Cs, USARTs, and timers, offloading memory copies from the CPU and improving throughput. Typical applications include industrial motor control (BLDC, PMSM, and stepper drivers), USB HID peripherals (mice, keyboards, custom input devices), CAN-bus nodes for vehicle and industrial networks, point-of-sale terminals, and HVAC controllers. The 72 MHz speed and USB+CAN combination make it a frequent choice for gateways and protocol converters bridging CAN and USB or CAN and Ethernet-via-SPI. When designing with the LFBGA-100 package, ensure 4-layer PCB stack-up with controlled-impedance routing for USB DP/DM, since the 90-ohm differential pair must meet USB 2.0 Full-Speed signalling. Decouple each VDD/VSS pair with a 100 nF X7R ceramic placed within 3 mm of the ball, and add a 4.7 uF bulk capacitor near the regulator input. Configure unused I/O as analog inputs (high-impedance) to minimize quiescent current in Stop mode. This page aggregates distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Angebot Kontakt
STM32F103VBI6 - 72MHz Cortex-M3 128KB MCU | STMicroelectronics
STM32F103VBI6

STM32F103VBI6 - 72MHz Cortex-M3 128KB MCU | STMicroelectronics

STMicroelectronics STM32F103VBI6 is an Arm Cortex-M3 32-bit microcontroller with a 72 MHz maximum CPU frequency, 128 KB of Flash memory, and a 100-UFBGA package measuring 7 x 7 mm. The device belongs to the STM32F1 mainstream performance line and supports operation from 2.5 V to 3.3 V according to the supplied distributor data. It is positioned for embedded control, communications, industrial automation, USB, and CAN-based designs that require dense peripheral integration in a compact surface-mount package. A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, working memory, peripherals, and interface logic on one device. The STM32F103 series combines an Arm Cortex-M3 core with dedicated timers, analog converters, communication interfaces, and general-purpose I/O. Within the product hierarchy, the STM32F103VBI6 is an Arm Cortex-M3 MCU, an embedded microcontroller, and a semiconductor designed for real-time embedded-control applications. Verified product features include a 72 MHz CPU, 128 KB of Flash, seven timers, two ADCs, nine communication interfaces, USB support, and CAN support. Its 100-pin UFBGA package allows access to a large pin count without the lead span of a conventional 100-pin through-hole or LQFP package. The 7 x 7 mm land pattern is intended for high-density PCB layouts, but exposed-pad routing, assembly capability, and thermal performance must be evaluated against the complete manufacturer documentation. The STM32F103VBI6 uses the Arm Cortex-M3 architecture with a 32-bit instruction set. Its 128 KB Flash provides on-chip program storage, while the peripheral mix supports common embedded-control tasks such as digital I/O, timing, analog measurement, serial communications, USB, and CAN. Exact SRAM capacity, ADC resolution, I/O voltage limits, timer channels, and electrical characteristics are not present in the supplied search data and therefore remain [DATA_NEEDED: SRAM capacity], [DATA_NEEDED: ADC resolution], and [DATA_NEEDED: detailed electrical characteristics]. Typical uses include industrial controllers, USB-connected embedded products, CAN network nodes, data-acquisition equipment, motor-control subsystems, and compact control boards. The seven timers and two ADCs make it relevant to systems combining periodic control functions with analog input conditioning. USB and CAN connectivity can reduce external interface hardware when the board already uses the STM32F1 ecosystem, although firmware, clocking, peripheral-equivalence, and qualification checks remain essential before redesigning an existing product. The principal design consideration is that the 100-UFBGA package demands fine-pitch PCB layout and careful assembly planning. A manufacturer-qualified pin map was not included in the supplied data, so engineers must verify all 100 terminals, exposed-pad requirements, recommended decoupling, and test-point access in the official STM32F103 documentation before schematic capture or PCB release. Pricing also was not exposed in the supplied results, making procurement cost and lifecycle planning dependent on a current distributor quotation. This product record consolidates the verified STM32F103VBI6 specifications, distributor availability, package information, interface features, sourcing links, and engineering caveats into one decision aid. It distinguishes documented facts from missing parameters and avoids presenting functional MCU alternatives as verified drop-in replacements, which is important because package, pin mapping, clock configuration, and peripheral compatibility must be confirmed independently.

Angebot Kontakt
STM32F103VBI6TR - 72MHz Cortex-M3 128KB MCU | STMicroelectronics (Tape & Reel)
STM32F103VBI6TR

STM32F103VBI6TR - 72MHz Cortex-M3 128KB MCU | STMicroelectronics (Tape & Reel)

STMicroelectronics STM32F103VBI6TR is an Arm Cortex-M3 32-bit microcontroller with a 72 MHz maximum CPU frequency, 128 KB of Flash memory, and a 100-UFBGA package measuring 7 x 7 mm. The device belongs to the STM32F1 mainstream performance line and supports operation from 2.5 V to 3.3 V according to the supplied distributor data. It is positioned for embedded control, communications, industrial automation, USB, and CAN-based designs that require dense peripheral integration in a compact surface-mount package. A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, working memory, peripherals, and interface logic on one device. The STM32F103 series combines an Arm Cortex-M3 core with dedicated timers, analog converters, communication interfaces, and general-purpose I/O. Within the product hierarchy, the STM32F103VBI6TR is an Arm Cortex-M3 MCU, an embedded microcontroller, and a semiconductor designed for real-time embedded-control applications. Verified product features include a 72 MHz CPU, 128 KB of Flash, seven timers, two ADCs, nine communication interfaces, USB support, and CAN support. Its 100-pin UFBGA package allows access to a large pin count without the lead span of a conventional 100-pin through-hole or LQFP package. The 7 x 7 mm land pattern is intended for high-density PCB layouts, but exposed-pad routing, assembly capability, and thermal performance must be evaluated against the complete manufacturer documentation. The STM32F103VBI6TR uses the Arm Cortex-M3 architecture with a 32-bit instruction set. Its 128 KB Flash provides on-chip program storage, while the peripheral mix supports common embedded-control tasks such as digital I/O, timing, analog measurement, serial communications, USB, and CAN. Exact SRAM capacity, ADC resolution, I/O voltage limits, timer channels, and electrical characteristics are not present in the supplied search data and therefore remain [DATA_NEEDED: SRAM capacity], [DATA_NEEDED: ADC resolution], and [DATA_NEEDED: detailed electrical characteristics]. Typical uses include industrial controllers, USB-connected embedded products, CAN network nodes, data-acquisition equipment, motor-control subsystems, and compact control boards. The seven timers and two ADCs make it relevant to systems combining periodic control functions with analog input conditioning. USB and CAN connectivity can reduce external interface hardware when the board already uses the STM32F1 ecosystem, although firmware, clocking, peripheral-equivalence, and qualification checks remain essential before redesigning an existing product. The principal design consideration is that the 100-UFBGA package demands fine-pitch PCB layout and careful assembly planning. A manufacturer-qualified pin map was not included in the supplied data, so engineers must verify all 100 terminals, exposed-pad requirements, recommended decoupling, and test-point access in the official STM32F103 documentation before schematic capture or PCB release. Pricing also was not exposed in the supplied results, making procurement cost and lifecycle planning dependent on a current distributor quotation. This product record consolidates the verified STM32F103VBI6TR specifications, distributor availability, package information, interface features, sourcing links, and engineering caveats into one decision aid. It distinguishes documented facts from missing parameters and avoids presenting functional MCU alternatives as verified drop-in replacements, which is important because package, pin mapping, clock configuration, and peripheral compatibility must be confirmed independently.

Angebot Kontakt
STM32F103VBT6 - 72MHz Cortex-M3 MCU 128KB Flash LQFP-100 | ST
STM32F103VBT6

STM32F103VBT6 - 72MHz Cortex-M3 MCU 128KB Flash LQFP-100 | ST

The STMicroelectronics STM32F103VBT6 is a 32-bit medium-density performance line ARM Cortex-M3 microcontroller running at 72 MHz with 128 KB Flash and 20 KB SRAM, housed in a 100-pin LQFP (14x14 mm) package. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals on one die, forming the lowest level of the embedded systems hierarchy: MCU -> microcontroller -> embedded processor -> semiconductor device. The STM32F1 series is built on the ARM Cortex-M3 architecture, which delivers 90 DMIPS at 1.25 DMIPS/MHz with single-cycle multiply and hardware division, making it one of the most widely adopted 32-bit MCU platforms in industrial and consumer electronics. Key features of the STM32F103VBT6 include seven timers (three general-purpose 16-bit timers plus one advanced PWM motor-control timer), two 12-bit ADCs with up to 16 external channels, and nine communication interfaces: five USART/UARTs, two I2C, two SPI, plus USB 2.0 full-speed device and CAN 2.0B. The 43-maskable interrupt nested vectored interrupt controller enables deterministic real-time response. Technically, the device operates from a 2.0 V to 3.6 V supply with a robust power architecture including POR/PDR, programmable voltage detector, and low-power run, sleep, stop, and standby modes. The Flash accelerator allows the CPU to achieve near zero-wait-state execution at 72 MHz. DMA controller support offloads data transfers between peripherals and memory. Typical applications include industrial motor control, PLC I/O modules, communication gateways using USB or CAN, medical handheld instruments, and consumer appliances. The combination of a PWM motor-control timer and dual ADC makes it a classic choice for three-phase inverter control. For design, note that GPIO output drive and 5 V tolerance rules differ per pin group; consult the datasheet pin definition table before connecting 5 V logic. Decouple VDD/VDDA pins with 100 nF ceramics placed close to each supply pair. This page synthesizes distributor pricing, drop-in alternatives including GD32F103 and APM32F103 cross-references, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt
STM32F103VBT6TR - 72MHz Cortex-M3 MCU 128KB Flash LQFP-100 | ST (Tape & Reel)
STM32F103VBT6TR

STM32F103VBT6TR - 72MHz Cortex-M3 MCU 128KB Flash LQFP-100 | ST (Tape & Reel)

The STMicroelectronics STM32F103VBT6TR is a 32-bit medium-density performance line ARM Cortex-M3 microcontroller running at 72 MHz with 128 KB Flash and 20 KB SRAM, housed in a 100-pin LQFP (14x14 mm) package. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals on one die, forming the lowest level of the embedded systems hierarchy: MCU -> microcontroller -> embedded processor -> semiconductor device. The STM32F1 series is built on the ARM Cortex-M3 architecture, which delivers 90 DMIPS at 1.25 DMIPS/MHz with single-cycle multiply and hardware division, making it one of the most widely adopted 32-bit MCU platforms in industrial and consumer electronics. Key features of the STM32F103VBT6TR include seven timers (three general-purpose 16-bit timers plus one advanced PWM motor-control timer), two 12-bit ADCs with up to 16 external channels, and nine communication interfaces: five USART/UARTs, two I2C, two SPI, plus USB 2.0 full-speed device and CAN 2.0B. The 43-maskable interrupt nested vectored interrupt controller enables deterministic real-time response. Technically, the device operates from a 2.0 V to 3.6 V supply with a robust power architecture including POR/PDR, programmable voltage detector, and low-power run, sleep, stop, and standby modes. The Flash accelerator allows the CPU to achieve near zero-wait-state execution at 72 MHz. DMA controller support offloads data transfers between peripherals and memory. Typical applications include industrial motor control, PLC I/O modules, communication gateways using USB or CAN, medical handheld instruments, and consumer appliances. The combination of a PWM motor-control timer and dual ADC makes it a classic choice for three-phase inverter control. For design, note that GPIO output drive and 5 V tolerance rules differ per pin group; consult the datasheet pin definition table before connecting 5 V logic. Decouple VDD/VDDA pins with 100 nF ceramics placed close to each supply pair. This page synthesizes distributor pricing, drop-in alternatives including GD32F103 and APM32F103 cross-references, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt
STM32F103VBT7 - 72MHz Cortex-M3 128KB MCU | STMicroelectronics
STM32F103VBT7

STM32F103VBT7 - 72MHz Cortex-M3 128KB MCU | STMicroelectronics

The STMicroelectronics STM32F103VBT7 is a 32-bit ARM Cortex-M3 microcontroller with a maximum 72 MHz operating frequency, 128 KB of Flash memory, and a 100-pin LQFP package measuring 14 mm by 14 mm. It belongs to the STM32F1 performance-line family and combines an embedded processor, memory, timers, analog conversion, and communication peripherals in one device. According to the verified manufacturer-linked data, the part includes USB, CAN, seven timers, two ADCs, and nine communication interfaces. A microcontroller is a programmable integrated circuit used as the central control element of an embedded system. This STM32 MCU follows the ARM Cortex-M3 real-time processor architecture and provides general-purpose I/O, serial communication, analog measurement, timing, and control functions. Its 32-bit architecture supports control workloads requiring more arithmetic capability than an 8- or 16-bit microcontroller, while its integrated peripherals reduce the need for separate interface chips. The STM32F103VBT7 combines a maximum CPU frequency of 72 MHz with 128 KB of programmable Flash. Other verified headline features include USB and CAN connectivity, two analog-to-digital converters, seven 16-bit timers, and nine communication interfaces. These resources make the device suitable for connected industrial controllers, USB peripherals, CAN nodes, data acquisition units, and compact embedded control systems. The Cortex-M3 core is designed for efficient embedded instruction execution and supports single-cycle multiplication and hardware division according to the retrieved technical summary. A maximum frequency of 1.25 DMIPS/MHz is stated at zero-wait-state memory access in the same summary. Designers must still select suitable clock, reset, boot, and memory-support circuitry according to the complete manufacturer documentation before finalizing an embedded design. Typical uses include USB-connected data loggers, CAN-based industrial modules, motor and motion controllers, sensor acquisition equipment, instrumentation, and CAN-to-UPS network bridges. The combination of USB, CAN, multiple timers, and dual ADC resources allows several communications and control functions to share one controller. Engineers should prioritize peripheral-pin availability and package routing over processor headline performance when assigning board functions. A critical design consideration is validating all pin multiplexing, alternate-function assignments, and peripheral dependencies against the manufacturer datasheet. The LQFP package exposes many signals, but simultaneous peripheral use may constrain I/O assignment. Board design should also provide stable power, decoupling, clock routing, a compatible programming interface, and a boot configuration appropriate for the intended firmware. This page combines verified distributor specifications, source links, application engineering guidance, and candidate compatibility information. It also distinguishes confirmed source data from parameters requiring additional verification, helping engineers move from part identification to design review without treating unverified details as guaranteed specifications.

Angebot Kontakt
STM32F103VBT7TR - 72MHz Cortex-M3 128KB MCU | STMicroelectronics (Tape & Reel)
STM32F103VBT7TR

STM32F103VBT7TR - 72MHz Cortex-M3 128KB MCU | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F103VBT7TR is a 32-bit ARM Cortex-M3 microcontroller with a maximum 72 MHz operating frequency, 128 KB of Flash memory, and a 100-pin LQFP package measuring 14 mm by 14 mm. It belongs to the STM32F1 performance-line family and combines an embedded processor, memory, timers, analog conversion, and communication peripherals in one device. According to the verified manufacturer-linked data, the part includes USB, CAN, seven timers, two ADCs, and nine communication interfaces. A microcontroller is a programmable integrated circuit used as the central control element of an embedded system. This STM32 MCU follows the ARM Cortex-M3 real-time processor architecture and provides general-purpose I/O, serial communication, analog measurement, timing, and control functions. Its 32-bit architecture supports control workloads requiring more arithmetic capability than an 8- or 16-bit microcontroller, while its integrated peripherals reduce the need for separate interface chips. The STM32F103VBT7TR combines a maximum CPU frequency of 72 MHz with 128 KB of programmable Flash. Other verified headline features include USB and CAN connectivity, two analog-to-digital converters, seven 16-bit timers, and nine communication interfaces. These resources make the device suitable for connected industrial controllers, USB peripherals, CAN nodes, data acquisition units, and compact embedded control systems. The Cortex-M3 core is designed for efficient embedded instruction execution and supports single-cycle multiplication and hardware division according to the retrieved technical summary. A maximum frequency of 1.25 DMIPS/MHz is stated at zero-wait-state memory access in the same summary. Designers must still select suitable clock, reset, boot, and memory-support circuitry according to the complete manufacturer documentation before finalizing an embedded design. Typical uses include USB-connected data loggers, CAN-based industrial modules, motor and motion controllers, sensor acquisition equipment, instrumentation, and CAN-to-UPS network bridges. The combination of USB, CAN, multiple timers, and dual ADC resources allows several communications and control functions to share one controller. Engineers should prioritize peripheral-pin availability and package routing over processor headline performance when assigning board functions. A critical design consideration is validating all pin multiplexing, alternate-function assignments, and peripheral dependencies against the manufacturer datasheet. The LQFP package exposes many signals, but simultaneous peripheral use may constrain I/O assignment. Board design should also provide stable power, decoupling, clock routing, a compatible programming interface, and a boot configuration appropriate for the intended firmware. This page combines verified distributor specifications, source links, application engineering guidance, and candidate compatibility information. It also distinguishes confirmed source data from parameters requiring additional verification, helping engineers move from part identification to design review without treating unverified details as guaranteed specifications.

Angebot Kontakt
STM32F103VCH6 - 72MHz Cortex-M3 MCU | STMicroelectronics
STM32F103VCH6

STM32F103VCH6 - 72MHz Cortex-M3 MCU | STMicroelectronics

The STMicroelectronics STM32F103VCH6 is a 32-bit ARM Cortex-M3 microcontroller operating at up to 72 MHz, with 256 KB of flash memory and 100-LFBGA packaging measuring 10 x 10 mm. It belongs to the STM32F1 Performance Line and is positioned for embedded systems requiring extensive peripheral connectivity, compact packaging, and a 2.5 V or 3.3 V operating supply. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, and peripherals such as timers, communication interfaces, and analog conversion blocks into one device. The STM32F1 family hierarchy includes the STM32 microcontroller product type, the STM32F1 series, the Performance Line, and the high-density STM32F103 platform. Within the broader semiconductor category, this device combines general-purpose control processing with dedicated embedded peripherals on a single IC. The verified product information identifies a 72 MHz ARM Cortex-M3 core, 32-bit RISC architecture, 256 KB flash organized as 256K x 8 bits, and a 100-LFBGA package. The STM32F1 Performance Line family is also described as supporting USB, CAN, 11 timers, three ADCs, and 13 communication interfaces. These resources support designs that combine control-loop processing with multiple external communication channels and analog measurements. At the architecture level, the Cortex-M3 processor provides a 32-bit execution environment suitable for embedded control, while the STM32F103 peripheral set integrates timing, conversion, and communications functions around that core. A 10 x 10 mm LFBGA substantially reduces PCB area compared with leaded packages, but it also requires careful PCB layout, fine-pitch assembly, and inspection because component pads cannot be visually inspected from the board edge. Typical applications include industrial controllers, CAN-connected motor equipment, USB-enabled data acquisition systems, communication gateways, and compact embedded instruments. The 100-pin package provides a high pin count for systems that need numerous external connections, while 256 KB of flash accommodates firmware, configuration data, and application routines. Its 72 MHz maximum frequency also provides useful control-loop and communications headroom. Designers should allocate the PCB footprint for the exact 100-LFBGA arrangement, verify the electrical requirements for every populated ball, and validate decoupling, clock, reset, and programming access. Because the verified snippets do not provide a complete public pin table, the pinout is left unpopulated rather than inferred. Firmware and board bring-up should also account for the STM32F103-specific startup sequence and peripheral configuration.

Angebot Kontakt