Integrierte Schaltungen

Z84C0010FEC

Z84C0010FEC - 10MHz CMOS Z80 CPU, 44-LQFP | Zilog

The Zilog Z84C0010FEC is a CMOS Z80 8-bit microprocessor (CPU) core operating at clock speeds up to 10 MHz, housed in a 44-pin LQFP (10 x 10 mm) surface-mount package. As a member of the Z84C00 family, it delivers the classic Z80 architecture in a low-power CMOS process. A microprocessor is the central processing unit (CPU) of a computing system, responsible for executing program instructions, performing arithmetic and logic operations, and controlling memory and peripheral access. The Z80 CPU, originally introduced by Zilog, is one of the most widely deployed 8-bit processor architectures in history, occupying the top of its product hierarchy: instruction-set architecture -> Z80 CPU -> 8-bit microprocessor -> embedded processor IC. Key features of the Z84C0010FEC include a single Z80 8-bit core with 10 MHz maximum clock frequency, CMOS technology for significantly reduced power consumption compared to the original NMOS parts, single 5V supply operation, and a 44-pin LQFP footprint that saves board space versus legacy DIP packages. The device is part of the broader Z84C00 speed family spanning 6, 8, 10, and 20 MHz speed grades. Architecturally, the Z80 core provides 16-bit address and data path capability through register pairs, dual index registers (IX, IY), an on-chip dynamic RAM refresh counter, and support for interrupt modes 0, 1, and 2, enabling daisy-chained peripheral interrupt structures with Z80 family peripherals such as the Z80 CTC, SIO, and PIO. Typical applications include legacy industrial control systems, embedded retro-computing and hobbyist designs, telecom line cards, and maintenance replacement of CPU silicon in long-life equipment where software compatibility with the Z80 instruction set must be preserved. Design consideration: preserve the classic 5V TTL-level bus environment and observe proper decoupling on the 44-LQFP; clock integrity at 10 MHz matters for full-speed designs, so keep the crystal or oscillator traces short. This page synthesizes distributor pricing, verified drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet.

Angebot Kontakt

Z84C0020PEC

Z84C0020PEC - 20 MHz Z80 CMOS CPU | Zilog | DIP-40

Zilog Z84C0020PEC is an 8-bit CMOS Z80 central processing unit operating at 20 MHz in a 40-pin PDIP package. The verified distributor data identifies one core, a 20 MHz clock, and 40-pin PDIP construction. The family datasheet identifies the device as part of the enhanced Z8400/Z84C00 processor family, whose internal register set contains 208 bits and whose architecture supports efficient memory utilization and software migration. A microprocessor is the central control element of a computer or embedded controller, fetching instructions, decoding operations, and coordinating memory and peripheral access. The Z80 belongs to the 8-bit microprocessor class and extends the earlier Z80 architecture through enhanced processing capability. Within the broader electronics hierarchy, it is a CMOS microprocessor IC rather than a microcontroller: external memory, clocking, reset, interrupt, and peripheral circuitry remain part of the surrounding system design. The most important verified specifications are the 8-bit CPU architecture, 20 MHz operating frequency, single-core configuration, CMOS technology, and PDIP-40 package. Zilog describes speed offerings across the broader family from 6 MHz through 20 MHz. The manufacturer documentation states that the processor family provides improved system throughput and more efficient memory utilization than comparable earlier-generation processors while retaining software-migration support. Z84C0020PEC is suitable for legacy Z80 systems, industrial controllers, educational platforms, embedded instruments, and retro-computing designs that specifically require this processor and package. Its parallel CPU architecture remains useful for systems built around Z80 memory, interrupt, and peripheral conventions. Because it is a microprocessor rather than a self-contained microcontroller, designers must provide the required external system components and verify timing, bus loading, and software compatibility. A critical hardware requirement is confirmation of the complete operating voltage, temperature grade, pinout, timing, and electrical limits from the manufacturer datasheet for the exact ordering code. The suffix PEC is associated with the listed 40-pin PDIP device, but package and suffix details should not be inferred beyond the supplied data when purchasing or redesigning. This page consolidates verified distributor identification, manufacturer family documentation, sourcing links, and practical replacement guidance. It also distinguishes true same-footprint drop-in candidates from alternatives that are merely functionally similar but would require board changes, preventing an incompatible substitution from being presented as a safe replacement.

Angebot Kontakt

Z84C4310AEG

Z84C4310AEG - Z80 SIO/3 10MHz CMOS Serial I/O | Zilog

The Zilog Z84C4310AEG is a CMOS Z80 SIO/3 serial input/output controller operating at 10 MHz, housed in a 44-pin LQFP package. It integrates two independent full-duplex serial channels, a Z80-compatible bus interface, and programmable baud-rate generators, providing up to two channels of synchronous/asynchronous serial communication in legacy Z80 microprocessor systems. A Serial I/O Controller (SIO) is a category of peripheral device that offloads serial framing, handshaking, and clock-recovery from the host CPU. In the system hierarchy, the Z84C4310AEG sits as a peripheral IC alongside the CPU (e.g., Z84C00 Z80), the CTC counter-timer, and the PIO parallel I/O. The 'Z80 SIO/3' designation identifies it as the third-generation Zilog SIO, adding enhanced HDLC/SDLC support and dedicated modem control signals that the original Z80 SIO (Z8440) lacked. Key features include two independent full-duplex serial channels with independent baud-rate generators, integrated Z80 bus interface with INT/IE vectors, programmable data formats (5 to 8 bits per character, 1 to 2 stop bits, parity even/odd/none), four on-chip DMA channels with selectable FIFO depths, and CMOS low-power operation from a single 5 V supply. The '10' suffix denotes 10 MHz maximum clock, allowing sustained serial throughput up to 1 Mbaud in synchronous mode. Architecturally, the Z84C4310AEG pairs the legacy Z80 SIO/3 register set with a CMOS process, reducing the original NMOS part's typical 200 mA supply current to roughly 10 mA active. Each channel independently handles receive clock-recovery, transmit clock generation, and break/abort detection. The chip supports NRZ, NRZI, and FM encodings, and the four DMA channels permit direct memory transfers without CPU intervention, which is critical in tight real-time protocols such as BISYNC and HDLC. Typical applications include industrial Z80-based embedded control boards, factory-floor serial-backplane nodes, point-of-sale terminals, telecom front-end cards, and legacy M2M/SCADA controllers that require multi-drop synchronous or asynchronous serial links. Engineers select this part specifically when existing firmware targets the Z80 SIO register set, when upgrading older NMOS boards to a CMOS low-power redesign, or when a single chip must terminate two channels of modem-grade serial traffic. Designers should note that Z84C4310AEG requires an external 5 V supply and a quartz-crystal or system-clock source up to 10 MHz; the receive and transmit clocks can alternatively be supplied from an external modem. Unused inputs must be pulled to defined logic levels to avoid spurious interrupts. The 44-LQFP footprint (10 mm × 10 mm body) allows drop-in upgrade from the legacy 44-PLCC Z80 SIO designs that already use the same pinout. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, including cross-family same-brand variants and architectural context for engineers maintaining or upgrading legacy Z80 platforms.

Angebot Kontakt

Z8673312PSG

Z8673312PSG - 8-Bit 12MHz 8KB OTP Microcontroller | Zilog

Zilog Z8673312PSG is an 8-bit Z8 CMOS microcontroller operating at up to 12 MHz with 8 KB of one-time-programmable memory, supplied in a 28-pin DIP package. The verified distributor listings identify the device as a Z8 Z8 microcontroller with 8K x 8 OTP memory and a 12 MHz clock. Its architecture sits within the hierarchy of microcontrollers, embedded processors, and general-purpose semiconductor ICs. An 8-bit microcontroller is a compact embedded controller designed to execute instructions from a fixed program memory and interface with sensors, switches, indicators, communications circuits, and other peripherals. One-time-programmable memory is intended for final firmware versions that do not need repeated field updates, while the 12 MHz operating rate provides the execution headroom required by typical control and monitoring tasks. The principal verified characteristics are an 8-bit processor architecture, 12 MHz maximum operating frequency, 8 KB of OTP program memory organized as 8K x 8, CMOS construction, and a 28-pin DIP package. The DIP format supports conventional PCB insertion and prototyping workflows. The listing also identifies the product with the Z8 family, placing it in Zilog's established embedded-controller product line. The device's architecture is relevant for cost-sensitive embedded systems where deterministic firmware execution, compact logic integration, and one-time-programmable storage are more important than flash reprogrammability. A datasheet provides the authoritative pin, electrical, timing, and environmental limits. Those details were not reproduced in the supplied verification snippets and should therefore be checked before final schematic, clock, and reset design work. Typical design uses include simple industrial control panels, appliance controllers, small sensor-hub nodes, LED sequencing modules, and embedded timing or event-control systems. The 12 MHz clock and 8 KB OTP memory are sufficient for focused firmware that reads inputs, executes control logic, and drives outputs without requiring a high-performance processor or external program-memory device. Designers should treat the 28-pin DIP footprint and 8 KB OTP limit as fixed constraints. Firmware size must be checked against the available program memory before production programming because OTP devices cannot be conventionally reflashed. Decoupling, reset, oscillator, and unused-pin handling should follow the manufacturer datasheet rather than generic MCU assumptions. This product data consolidates verified distributor descriptions, package information, datasheet access, and same-family alternatives. It also distinguishes published facts from unavailable details, allowing engineers to evaluate sourcing and replacement options without mistaking unsupported electrical, environmental, lifecycle, or pricing claims for manufacturer specifications.

Angebot Kontakt

Z8673312SSG

Z8673312SSG - 8-Bit 12MHz OTP Microcontroller | Zilog

Zilog Z8673312SSG is an 8-bit Z8 microcontroller with a 12 MHz clock, 8 KB of one-time-programmable memory, and a 28-pin SOIC package for commercial-temperature embedded control. It combines an 8-bit data path with 8K x 8 OTP program storage in a compact surface-mount package measuring approximately 18 mm by 2.44 mm in height. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripheral functions onto one device. The Z8 belongs to the broader embedded-controller hierarchy: Z8 8-bit MCU → Z80-based core → embedded microcontroller → embedded semiconductor. Such devices are used where a compact controller must execute firmware, read inputs, control outputs, and manage basic timing or communications without a separate processor and external program-memory device. The Z8673312SSG's primary characteristics are its 12 MHz maximum clock frequency, 8 KB OTP program memory, 8-bit architecture, and 28-pin SOIC package. OTP memory permits one-time configuration of operating firmware, making the device useful for production controllers where final programmed code must remain inside the device without allowing routine field updates. Its 28-pin SOIC footprint also supports conventional surface-mount assembly and prototyping workflows. The Z8 architecture supports compact embedded-control designs rather than high-compute workloads. Its 8-bit bus architecture and 12 MHz clock are appropriate for digital control, sequence control, simple user-interface handling, and peripheral coordination. Because OTP program memory cannot be rewritten after programming, firmware validation and manufacturing provisioning should occur before the device reaches the end user. Typical uses include industrial equipment interfaces, appliance controllers, small motor-control modules, sensor-conditioning systems, and compact embedded products. The commercial-grade part can be used in designs where the operating environment remains within its specified commercial-temperature limits. For mains-powered or battery-powered products, designers should account for the stated 5 V operating supply and validate timing, power, and I/O requirements in the completed system. A critical design consideration is the one-time-programmable nature of the 8 KB program memory. Firmware must fit within 8 KB, include all required interrupt and peripheral routines, and be fully tested before programming. The complete pin description, electrical limits, oscillator connections, and programming procedure should be taken from the manufacturer datasheet before assigning PCB signals or defining the power architecture. This product page organizes the Z8673312SSG's core specifications, verified package information, commercial sourcing path, compatible replacement data, and practical implementation guidance. It also distinguishes confirmed drop-in interchangeability from generic functional similarity, helping engineers make faster PCB reuse decisions without confusing an exact replacement with merely comparable microcontroller families.

Angebot Kontakt

Z8674312PSG

Z8674312PSG - 8-Bit 12MHz OTP Microcontroller | Zilog

The Zilog Z8674312PSG is an 8-bit Z8 Z86-family microcontroller with 8 KB of one-time-programmable program memory, 236 x 8 bytes of RAM, a 12 MHz maximum operating frequency, and 32 general-purpose I/O pins in a 40-pin PDIP package. A microcontroller is a programmable semiconductor that integrates a CPU core, nonvolatile program memory, data memory, I/O ports, and peripherals on one device. The Z8674312PSG belongs to the Z8 microcontrollers family within the broader embedded-controller and semiconductor hierarchy. Its OTP program memory permits a finished device to be programmed once, making it suitable for cost-sensitive products that do not require in-circuit firmware updates. The principal device characteristics include an 8 KB (8K x 8) OTP program-memory capacity, 236 x 8 bytes of RAM, and a maximum clock frequency of 12 MHz. The device provides 32 general-purpose I/O pins, a Z8 processor core, EBI/EMI connectivity, power-on reset, and a watchdog timer. These features provide a practical combination of control logic, data storage, and peripheral integration for embedded products. The 12 MHz operating limit should be treated as the timing ceiling for the complete design, including clock tolerance, peripheral timing, and interrupt-service requirements. Its 8 KB OTP memory is suitable for compact control firmware, but memory utilization must be checked after including the startup code, drivers, interrupt routines, and application logic. The 236-byte RAM area also requires attention when buffering data or maintaining multiple task stacks. Typical uses include appliance controllers, small industrial control modules, building equipment, instrumentation, simple human-interface panels, and embedded automation products. For a new design, engineers should confirm oscillator requirements, available I/O, memory consumption, timing margins, and interrupt behavior against the complete Zilog datasheet before committing the 40-pin footprint. The main design consideration is that OTP memory cannot be erased and rewritten in the field. Firmware validation must therefore occur before final programming, while power, ground, and decoupling layout must follow the electrical requirements published for this device family. This page consolidates verified distributor specifications, procurement details, package information, application guidance, and design cautions into a compact engineering reference that helps distinguish this Z8 microcontroller from broader embedded processor families.

Angebot Kontakt

Z86C9012ASG

Z86C9012ASG - 12MHz ROMless 8-bit MCU | Zilog

The Zilog Z86C9012ASG is a 12 MHz ROMless C40 8-bit microcontroller with 32 I/O lines, 236 bytes of RAM, and a 44-pin LQFP package. It operates from 3.0 V to 5.5 V and includes two 8-bit timers, six interrupts, a watchdog timer, power-on reset, low-voltage protection, and two analog comparators. An 8-bit microcontroller is a programmable semiconductor that integrates a processor core, memory, input/output ports, timers, and peripheral functions on one device. The Z86C9012ASG belongs to the broader Z8 family and the Z86C90 series of embedded controllers. Its ROMless architecture means application code is loaded from external program memory, making the device suitable for systems where firmware size, update requirements, or program-memory organization must be controlled by the designer. The device provides 32 I/O lines across a 44-pin package, leaving additional pins for power, clock, reset, programming, and other platform functions. Its two 8-bit timers support periodic events, timing, counting, and basic control functions. Six interrupt sources, an active watchdog timer, power-on reset, and low-voltage protection improve the suitability of the controller for embedded equipment that must continue operating predictably through normal control tasks and electrical disturbances. The 12 MHz operating speed provides a useful balance between processing capability, power consumption, and external-memory access in a compact embedded design. The C40 architecture is designed for 8-bit control applications and works with external program storage. Because no internal ROM is listed for this variant, the board design must include the appropriate external memory interface and a valid firmware-loading arrangement. Typical uses include appliance controllers, small industrial control modules, instrumentation interfaces, keypad and display products, and embedded products requiring timers, interrupt-driven I/O, and analog comparison functions. The two analog comparators can support threshold detection, while the general-purpose I/O can operate discrete switches, indicator circuits, and digital sensors. A key design consideration is the relationship between external memory access, clock configuration, and the device's 3.0 V to 5.5 V operating range. Board layout should keep memory-bus traces short and provide suitable decoupling at the supply pins. Firmware must also configure the watchdog and interrupt priorities so that normal peripheral servicing cannot be interrupted indefinitely. This page consolidates the Z86C9012ASG's key architectural ratings, package information, application guidance, and design considerations into one engineering-focused reference. It also distinguishes documented characteristics from parameters that require confirmation from the manufacturer datasheet before layout or production release.

Angebot Kontakt

Z86C9012FSC

Z86C9012FSC - 12MHz 8-Bit ROMless MCU | Zilog

Zilog Z86C9012FSC is an 8-bit Z8 ROMless microcontroller operating at 12 MHz in a 44-pin LQFP package measuring 10 mm by 10 mm. Its key characteristics include an 8-bit CPU core, ROMless architecture, commercial temperature grade, 5 V supply, and EBI/EMI connectivity support. The device is designed for embedded control systems that require external program and data memory while using a compact surface-mount package. A ROMless microcontroller is a semiconductor that contains the processor core and peripheral functions but requires external memory for application code and data. Within the embedded-control hierarchy, the Z86C9012FSC belongs to the 8-bit microcontroller class, combines an 8-bit CPU with external bus interfaces, and serves as the central control component in industrial, commercial, and instrumentation equipment. Unlike a device with embedded program memory, it allows firmware capacity to scale with an external memory device. The Z86C9012FSC operates at 12 MHz and is identified as an 8-bit ROMless MCU. Its 44-LQFP surface-mount package provides 44 external terminals and a 10 mm by 10 mm footprint. EBI/EMI connectivity expands the available external data-bus and memory-oriented interfaces, while the 5 V operating supply supports conventional industrial-control voltage levels. The commercial temperature designation makes the device appropriate for equipment operating within commercial environmental conditions. The Z8 CPU provides an 8-bit processing architecture suited to control loops, digital interfaces, and sequential logic rather than high-throughput computing. Because program storage is external, firmware deployment depends on the selected external memory device, bus configuration, and memory-map design. This separation can make board storage capacity independent of the MCU package and can support field-update architectures when the external memory interface is suitable. Typical uses include industrial controllers, instrument panels, keypad interfaces, embedded motor and process controls, and legacy peripheral-control systems. The 12 MHz operating rate supports deterministic tasks requiring regular sampling, protocol handling, and state-machine updates. EBI/EMI connectivity is particularly relevant to systems that need external code storage, data memory, or bus-connected peripherals. During schematic capture, treat the external memory bus and programming interface as central design areas. Preserve the manufacturer's recommended decoupling, oscillator, reset, and memory-bus routing, and verify all signal timing and drive requirements against the manufacturer datasheet. The ROMless architecture also requires a complete firmware and external-memory design before the circuit can operate as a standalone controller.

Angebot Kontakt

Z86C9012PEG

Z86C9012PEG - 8-Bit 12MHz ROMless MCU | Zilog

The Zilog Z86C9012PEG is an 8-bit Z8 ROMless microcontroller operating at 12 MHz with a 3 V to 5.5 V supply range, 32 I/O ports, and a 40-pin dual-inline package. It is designed for embedded control applications that require external program and data memory while providing a conventional 8-bit processor architecture, parallel digital I/O, and compact through-hole integration. An 8-bit microcontroller is a programmable semiconductor that executes instructions from a defined instruction set and operates on byte-sized data. The Z8 family belongs to the broader embedded-controller hierarchy: ROMless microcontroller → 8-bit microcontroller → embedded processing IC → semiconductor. ROMless architecture allows application firmware and working data to be placed in external memory, making the controller suitable when code size, memory upgrades, or separate storage requirements must be controlled by the system designer. The Z86C9012PEG combines a 12 MHz clock with 32 I/O ports in a 40-pin DIP package. Its operating supply range of 3 V to 5.5 V supports both 3.3 V and 5 V system designs when the external memory, peripherals, and I/O levels are compatible. The external-memory architecture provides implementation flexibility, while the parallel I/O count supports digital control, data acquisition, display interfaces, and communication peripherals. Because the device is ROMless, a complete system requires suitable external program memory and the associated address, data, and control connections. The 12 MHz operating frequency provides the timing reference for instruction execution and peripheral interfacing. As with other 8-bit controllers, the practical clock rate, code timing, and bus performance depend on the external memory implementation, bus timing, and firmware rather than on internal program storage alone. Typical uses include industrial control panels, building automation modules, instrumentation interfaces, motor-control logic, programmable timers, and legacy embedded systems being refreshed without changing an existing 40-pin PCB footprint. The DIP format is particularly useful for through-hole industrial equipment, prototypes, repair assemblies, and designs assembled in small or medium production volumes. The primary design consideration is compatibility with the existing controller ecosystem. Confirm pin assignments, external-memory requirements, reset behavior, oscillator connections, supply levels, and peripheral compatibility before replacing another device. Use the Zilog datasheet and pin-description table as the authority for PCB routing, and validate timing with the intended external memory and crystal or clock source. This product page consolidates the confirmed Z86C9012PEG specifications, package characteristics, sourcing information, and practical integration guidance. It also distinguishes confirmed attributes from details that require datasheet verification, helping engineers assess fit for an embedded-control redesign or legacy-system maintenance.

Angebot Kontakt

Z86C9116FEC

Z86C9116FEC - 16MHz 8-Bit ROMless MCU | Zilog | Embedded Control

The Zilog Z86C9116FEC is an 8-bit Z8 ROMless microcontroller operating at 16MHz, with 236 bytes of RAM, 32 I/O lines, two 8-bit timers, and a UART interface in a 44-LQFP package measuring 10mm by 10mm. The device is designed for embedded control applications that require external program memory and a compact, surface-mount microcontroller package. A ROMless microcontroller is an 8-bit microcontroller that does not contain its application program in internal ROM. It must be paired with an external memory device, which gives the system designer flexibility to select program capacity independently of the MCU. In the product hierarchy, Z86C9116FEC belongs to the Z8 family of ROMless microcontrollers and provides a straightforward architecture for small embedded controllers. The principal features of this device include a 16MHz operating frequency, 236 bytes of on-chip RAM, 32 general-purpose I/O lines, two 8-bit timer blocks, and one UART communication interface. Its ROMless architecture makes it appropriate when firmware changes are expected, when program storage requirements vary between products, or when a common external flash configuration is desired across multiple controller variants. The Z8 architecture provides an 8-bit processing path optimized for embedded control tasks rather than high-throughput computing. Combined with 32 I/O lines, the device can directly support digital inputs, outputs, control signals, and peripheral interfaces. The two 8-bit timers support timing and event-counting duties, while the UART provides a serial channel for connecting the controller to a host, sensor assembly, or communication module. Typical design opportunities include programmable logic controllers, appliance controllers, building-control modules, motor-sequence controllers, industrial interface modules, and compact embedded automation products. Its 44-LQFP package provides a practical pin count for systems requiring numerous external connections while remaining compatible with standard surface-mount assembly and inspection processes. A key design consideration is that the ROMless device requires suitable external program memory and a correctly designed bus interface. Designers should also confirm the available operating voltage, clock configuration, peripheral pin assignments, and memory interface requirements against the current Zilog datasheet before finalizing the schematic or PCB layout. This product page consolidates the verified distributor specifications, package information, pricing availability, cross-reference evidence, and design considerations for Z86C9116FEC. It also distinguishes confirmed drop-in replacements from merely similar controllers, helping engineers avoid selecting a 44-LQFP part whose pinout or architecture is not actually compatible.

Angebot Kontakt

Z86C9116FEG

Z86C9116FEG - 16MHz ROMless 8-Bit MCU | Zilog | Industrial

The Zilog Z86C9116FEG is an 8-bit Z8 ROMless microcontroller operating at 16 MHz, with 236 x 8 bytes of RAM, 24 general-purpose I/O pins, and UART/USART connectivity in a 44-LQFP 10 x 10 mm surface-mount package. Its 4.5 V to 5.5 V supply range and -40°C to +105°C industrial temperature range suit embedded control systems requiring compact, deterministic communications and general-purpose I/O. The Z86C9116FEG is designed for applications that require external program memory while retaining a compact 8-bit control architecture. What is an 8-bit ROMless microcontroller? A ROMless microcontroller is a programmable embedded controller that does not contain its own program memory. Instead, the application program is stored in external memory, such as an external ROM or nonvolatile memory. This makes ROMless devices useful when the firmware must be large, frequently updated, or separately managed. The Z8 family combines an 8-bit CPU, general-purpose I/O, timers, serial communication, and external-memory interfacing in a single device. The Z86C9116FEG provides a 16 MHz operating frequency, 236 x 8 bytes of internal RAM, 24 general-purpose I/O pins, and UART/USART connectivity. Its 44-LQFP package exposes 44 leads and is intended for surface-mount PCB assembly. The 4.5 V minimum operating voltage and 5.5 V maximum operating voltage are important constraints for systems using 5 V logic. The industrial temperature range supports use in factory equipment, industrial controllers, instrumentation, and other embedded applications where consumer-temperature components may be unsuitable. The ROMless architecture separates code execution from program storage and allows the designer to select the external memory device based on code size, programming requirements, or field-update strategy. The 16 MHz clock rate provides a balance between processing throughput, power consumption, and system design simplicity for 8-bit control tasks. UART/USART support allows the controller to communicate with sensors, host systems, converters, or other embedded modules. Typical uses include industrial automation modules, serial protocol bridges, keypad and display controllers, appliance control boards, motor-control supervisory circuits, and compact embedded instruments. The 24 available I/O pins can support digital inputs, outputs, control signals, status indicators, and external interface functions when the application does not require all pins for specialized peripheral functions. Designers should verify the external-memory interface, oscillator requirements, decoupling, and the complete 44-pin signal map against the manufacturer datasheet before layout. Because the provided source data does not publish a verified pinout or pricing table, those details remain explicitly marked as unavailable in the technical records. This page combines verified distributor specifications, package information, application guidance, and purchasing considerations for engineers evaluating the Z86C9116FEG.

Angebot Kontakt

Z86C9116FSC

Z86C9116FSC 16MHz ROMless 8-Bit MCU | Zilog

Zilog Z86C9116FSC is an 8-bit ROMless Z8 microcontroller operating at 16 MHz and packaged in a 44-pin LQFP measuring 10 mm by 10 mm. It provides 236 bytes of RAM, 32 I/O pins, two 8-bit timers, and a UART interface. The device combines a compact 8-bit embedded-control architecture with external program-memory support, making it suitable for cost-sensitive control systems that require dedicated application firmware. An 8-bit microcontroller is a microprocessor core, memory interface, and peripheral set integrated on one semiconductor die. The Z8 family belongs to the broader microcontroller and embedded-controller hierarchy, where firmware controls sensors, relays, user interfaces, communications, and power functions. Unlike a ROM-based device, the ROMless Z86C9116FSC requires an external program-memory device, allowing the program capacity and interface arrangement to be selected according to the finished system. The verified product information identifies a 16 MHz operating speed, 236 bytes of RAM, 32 I/O pins, two 8-bit timers, and one UART interface. These resources support basic sequential control, periodic timing, serial communication, and digital input/output tasks. The 44-LQFP package provides 44 physical leads for power, ground, clock, reset, programming, I/O, and external-memory connections, although exact lead assignments are not included in the supplied source data. The ROMless architecture is the principal engineering distinction of this Z8 device. External program memory allows firmware capacity to scale with the application, but the PCB must also provide the external memory interface, address and data routing, and associated signal-integrity measures. Designers should therefore evaluate the complete memory subsystem rather than treating the microcontroller package as a self-contained storage solution. Typical uses include small industrial controllers, appliance-control boards, keypad interfaces, communication modules, motor or relay sequencers, and compact embedded products that benefit from the Z8 instruction set and dedicated timers. External program memory is appropriate when a fixed application program must be loaded during manufacturing rather than stored in an internal ROM mask. A primary design consideration is package and memory-interface validation. Confirm the exact Z86C9116FSC pin assignment, external-memory requirements, clock configuration, and programming connection against the manufacturer documentation before layout release. Because the available verified data does not include a complete pinout or numerical distributor price schedule, those details remain explicitly unresolved rather than being inferred. This product page consolidates the verified distributor specifications, purchasing sources, package information, and engineering guidance for the Z86C9116FSC. It also distinguishes verified facts from missing electrical, pinout, pricing, and lifecycle details, helping engineers assess fit before committing to a PCB design or production order.

Angebot Kontakt

Z86C9116PEG

Z86C9116PEG - 8-Bit 16MHz ROMless MCU | Zilog

Zilog Z86C9116PEG is an 8-bit Z8 ROMless microcontroller operating at 16 MHz with a 4.5 V to 5.5 V supply range, 32 I/O ports, and a 40-pin CDIP package. It is designed for embedded control systems requiring a compact 8-bit processor, dedicated I/O capacity, and external program memory. A ROMless microcontroller is a microprocessor that contains no embedded program memory. The Z86C9116PEG therefore requires an external memory device for firmware storage, while its internal architecture supplies the central processing unit, I/O control, timers, interrupts, and communication peripherals. Within the semiconductor hierarchy, it belongs to the microprocessor and microcontroller family, specifically the Zilog Z8 product line. The principal operating characteristics are a 16 MHz clock, an 8-bit data bus, 32 I/O ports, and a 4.5 V to 5.5 V operating supply. Its industrial operating range makes it appropriate for factory equipment, instrumentation, access-control systems, and embedded controllers that require deterministic peripheral control. The 40-pin CDIP package also supports traditional through-hole assembly and prototyping workflows. The ROMless architecture separates firmware storage from the controller, allowing application code size to scale with an external memory component. This can be useful in designs that need multiple firmware variants, field-programmable logic, or a shared memory interface. The trade-off is that the board must provide an external memory device and associated address and data connections, increasing component count and PCB complexity relative to a ROM-based microcontroller. Typical applications include industrial keypad scanners, programmable timers, motor-control interfaces, serial protocol bridges, test fixtures, and compact control panels. The Z86C9116PEG is especially appropriate when a design needs more I/O than a small surface-mount controller offers but does not require the processing power or memory capacity of a 16- or 32-bit MCU. Before layout, confirm the external-memory interface requirements, reset behavior, oscillator arrangement, and available I/O functions in the Zilog Z86C9116 datasheet. Use the manufacturer pin-description table when assigning tracks because the 40-pin CDIP footprint includes both power, ground, clock, reset, I/O, and external-memory signals. This page combines core Z86C9116PEG specifications, verified sourcing information, compatible alternatives, and practical selection guidance to help engineers evaluate the controller for legacy and new embedded-control designs.

Angebot Kontakt

Z86C9116PSG

Z86C9116PSG - 16MHz 8-Bit ROMless MCU | Zilog

Zilog Z86C9116PSG is an 8-bit Z8 ROMless microcontroller operating at 16 MHz with a 4.5 V to 5.5 V supply range, 236 bytes of RAM, 32 I/O ports, and a 40-pin PDIP package. It belongs to the Z86C91 product family and requires an external program-memory device because no internal ROM is provided. An 8-bit ROMless microcontroller is a compact embedded-control processor designed for systems that require deterministic I/O handling rather than application storage inside the MCU. In the product hierarchy, the Z86C9116PSG is a microcontroller, an embedded processor, and a semiconductor integrated circuit. Its ROMless architecture separates program memory from the controller, allowing designers to select external storage according to firmware size and interface requirements. The headline features include a 16 MHz operating clock, an 8-bit data bus, 236 bytes of on-chip RAM, and 32 I/O ports. The 4.5 V to 5.5 V supply range supports conventional 5 V industrial embedded systems. Because the MCU is ROMless, an external program-memory device is required, while the 236 bytes of internal RAM provide limited working memory for variables, stack operations, and control-state management. The Z86C9116PSG uses the Z8 architecture and is positioned as a compact, low-cost controller for embedded products requiring parallel digital I/O. Its 40-pin PDIP package provides a comparatively large number of external connections compared with smaller surface-mount MCUs, making it practical for prototyping, through-hole industrial assemblies, and applications that need direct access to peripheral pins. Typical uses include appliance controllers, industrial sequencers, keyboard or panel interfaces, lighting-control modules, instrumentation, and small embedded automation systems. The 32 I/O ports are particularly useful when a design must connect multiple switches, indicators, sensors, or actuators without relying on additional interface expanders. When designing around this device, engineers must account for the absence of internal program memory and provide a suitable external memory implementation. The available verified data does not specify the external-memory interface, exact pin assignments, peripheral mix, or detailed timing characteristics, so those items should be confirmed in the manufacturer datasheet before schematic capture. This product page consolidates distributor availability, verified pricing, device hierarchy, package information, and same-brand replacement analysis. It also distinguishes directly documented drop-in candidates from alternatives that cannot be verified as pin-to-pin compatible, helping engineers avoid replacing an MCU solely because the clock speed and package description look similar.

Angebot Kontakt

Z86C9116VSG

Z86C9116VSG - 16MHz 8-Bit ROMless MCU | Zilog

The Zilog Z86C9116VSG is an 8-bit Z8 ROMless microcontroller with a 16 MHz clock speed, 32 I/O ports, and a 44-pin PLCC package. Its 4.5 V to 5.5 V supply-voltage range supports industrial control systems that use a conventional 5 V power rail. The ROMless architecture requires an external program-memory device, while the integrated 32-port I/O capability reduces the number of companion interface ICs needed in small embedded systems. An 8-bit microcontroller is a compact processor designed around a byte-oriented architecture, embedded control peripherals, and direct digital input/output. The Z8 family sits within the broader hierarchy of microcontrollers, embedded processors, and semiconductor components. Compared with a general-purpose processor, this device focuses on deterministic control tasks, communication peripherals, timers, and externally accessed program and data memory rather than operating-system performance or high-bandwidth computation. Principal features include ROMless operation, an 8-bit data bus, a 16 MHz maximum clock, and 32 I/O ports. The 44-pin PLCC package provides enough connections for external memory interfaces, parallel I/O, control signals, and clock or reset support. Because the device has no internal program memory, system access must include suitable external memory and address, data, and control wiring. The 4.5 V minimum supply voltage also leaves less headroom for low-voltage operation than 3.3 V-oriented microcontrollers. The Z86C9116VSG belongs to the Zilog Z86C91 family and uses the Z8 architecture. Its ROMless design provides flexibility for applications that require firmware upgrades, field-configurable control logic, or program storage in a separate nonvolatile device. At the same time, external memory introduces address-decoding and bus-timing requirements that must be considered during schematic design and PCB layout. The 16 MHz operating speed provides sufficient instruction throughput for typical embedded sequencing, data acquisition, keypad, display, actuator, and industrial automation tasks. Typical uses include programmable logic controllers, industrial controllers, instrumentation panels, keyboard scanners, LED or display sequence controllers, data-acquisition systems, and compact embedded automation equipment. The 32 I/O ports are especially useful for machines requiring numerous digital inputs and outputs, while external program memory allows application firmware to be sized independently of the microcontroller package. A critical design consideration is the ROMless implementation. Route the external memory bus cleanly, preserve the timing margin required by the Z8 bus interface, and include the required clock and reset components. Keep sensitive analog or communication circuitry away from high-current memory outputs, and validate signal integrity across all board lengths and temperature conditions. This page consolidates the key electrical ratings, package identity, sourcing considerations, and drop-in comparison candidates for the Z86C9116VSG. It also highlights the practical trade-offs involved in retaining the Z8 platform, especially external-memory requirements, package availability, and the difference between a true pin-compatible replacement and a merely similar controller.

Angebot Kontakt

Z86C9320FSC

Z86C9320FSC 8-Bit 20MHz ROMless MCU 44-LQFP | Zilog

The Zilog Z86C9320FSC is an 8-bit Z8 ROMless microcontroller operating at up to 20 MHz in a 44-LQFP package measuring 10 x 10 mm. It provides 236 KB of RAM, 24 I/O pins, three 8-bit timers, and a UART communication interface. Z86C9320FSC is intended for embedded control designs where external program memory is required and a compact, high-pin-count surface-mount implementation is preferred. An 8-bit microcontroller is a programmable semiconductor device designed to execute embedded control logic using an 8-bit data path. The Z86C9320FSC belongs to the Z8 family of Zilog microcontrollers and is a ROMless device, meaning the application program is stored in external memory rather than embedded program ROM. This architecture separates the controller from the program memory, allowing the memory device to be selected according to application capacity, interface, and cost requirements. The principal verified specifications are a maximum operating speed of 20 MHz, 236 KB of RAM, 24 I/O, three 8-bit timers, one UART interface, and a 44-LQFP package. The package provides 44 terminals for power, clock, reset, communications, timers, interrupts, general-purpose I/O, and external-memory connections. The reported speed options include 20 MHz, 25 MHz, and 33 MHz, while the distributor listing identifies the Z86C9320FSC specifically as a 20 MHz ROMless device. The ROMless architecture is useful for applications that need larger or field-updatable firmware than a fixed-program microcontroller normally provides. External program-memory selection must account for bus timing, address capacity, signal integrity, and the controller's documented external-memory interface. The Z86C9320FSC should therefore be evaluated as a system component rather than only as a standalone MCU. Typical application areas include industrial control panels, serial-control equipment, building automation modules, data-acquisition controllers, motor-control interfaces, and embedded communication products. A UART provides a practical path for host configuration, sensor networking, or supervisory control, while the three timers support periodic timing, input capture, or basic output-control functions depending on the complete peripheral configuration. A critical design consideration is firmware availability: because this device is ROMless, the PCB must include an appropriate external memory solution and correct bus support components. Engineers should verify the complete Zilog documentation for electrical limits, pin assignments, memory-interface timing, clock requirements, and programming procedure before releasing a production layout. This page consolidates verified distributor specifications, package information, sourcing details, and engineering-oriented application guidance. It also distinguishes documented facts from parameters that require confirmation from the manufacturer datasheet, helping designers compare the Z86C9320FSC efficiently without assuming unavailable electrical details.

Angebot Kontakt

Z86C9333FSC

Z86C9333FSC - 33MHz 8-Bit ROMless MCU | Zilog

Zilog Z86C9333FSC is a 33 MHz, 8-bit Z8 ROMless microcontroller with 236 x 8 bytes of RAM, 24 I/O lines, three 8-bit timers, UART/USART support, and EBI/EMI connectivity in a 44-pin LQFP package measuring 10 x 10 mm. Its 33 MHz operating speed provides higher throughput than conventional low-speed 8-bit controllers while retaining the simple Z8 architecture and external program-memory interface. An 8-bit microcontroller is a compact processor designed to execute embedded control logic from program memory and maintain operating state in RAM. The Z86C9333 belongs to the broader embedded-controller hierarchy: MCU -> microcontroller -> embedded processor -> semiconductor. A ROMless architecture means the device contains no internal program ROM, so firmware must be supplied through an external memory interface. This architecture is useful when programs, firmware revisions, or memory sizes must remain flexible. The verified feature set includes ROMless operation at 33 MHz, 236 bytes of RAM, 24 I/O lines, three 8-bit timers, UART communication, and EBI/EMI interfaces. The 44-LQFP surface-mount package exposes substantially more signal pins than small dual-inline packages, supporting parallel external memory and additional peripheral connectivity while remaining compatible with automated PCB assembly. The Z86C9333 architecture is intended for embedded control rather than high-compute workloads. Its external program-memory interface allows the stored firmware size to be established outside the MCU, while its three timers support periodic counting, timing, and event generation. UART/USART communication enables connection to host systems, sensors, or other controllers, and EBI/EMI provides an external bus-oriented path for additional devices. Typical applications include industrial keypad controllers, serial data concentrators, instrumentation interfaces, embedded control panels, and compact automation modules. In these systems, the 33 MHz speed can improve response to serial traffic and control tasks, while the 24 I/O lines reduce the need for separate I/O expanders. The ROMless configuration is particularly valuable when the same MCU platform must cover several firmware versions or board configurations. Designers must account for external program-memory timing, address decoding, bus contention, and required support components when using the ROMless configuration. PCB layout should minimize routing delay and preserve signal integrity on external bus and UART lines. Software must also provide the vector table and reset behavior expected by the external memory system. Because the verified data does not state supply voltage, timing margins, or detailed pin assignments, those values should be confirmed in the manufacturer documentation before schematic capture. This product page consolidates verified distributor specifications, same-package replacement information, application guidance, and design cautions. It distinguishes confirmed Z86C9333FSC characteristics from unavailable electrical details so procurement and engineering decisions can be made without inventing package, pin, or lifecycle information.

Angebot Kontakt

Z86C9533VSC

Z86C9533VSC - CMOS Z8 DSP Microcontroller | Zilog

Zilog Z86C9533VSC is a CMOS Z8 microcontroller with an embedded digital signal processor, combining general-purpose microcontroller control with dedicated DSP processing in a 84-pin leadless chip carrier package. It belongs to the Z8 family of highly integrated embedded controllers designed for applications requiring both digital control and real-time signal processing. The Z86C95 architecture is ROMless, allowing program storage and boot code to be implemented in external memory. A digital signal processor, commonly abbreviated as DSP, is a semiconductor architecture optimized for operations used in signal processing, including multiplication, accumulation, filtering, waveform generation, and spectral analysis. The Z8 MCU hierarchy combines a conventional embedded-control environment with an embedded DSP engine. This integration can reduce the need for separate processor packages when a system must perform control functions and process sampled or generated signals concurrently. The principal identifiable features of the Z86C9533VSC are its CMOS construction, Z8 single-chip microcontroller architecture, embedded DSP processor, ROMless configuration, and 84-pin LCC package. Its integration is useful when a product needs deterministic embedded control alongside digital signal-processing functions. Exact processor clock, memory, I/O, electrical limits, temperature range, and package dimensions must be confirmed against the manufacturer datasheet before schematic capture or firmware development. The Z86C9533VSC belongs to the Z86C95 MCU family, which combines microcontroller functionality with an embedded DSP processor. A ROMless architecture generally requires external program memory, so designers should plan the memory interface, reset behavior, bus timing, and firmware loading method as an integrated part of the system architecture rather than treating memory as an afterthought. Firmware development also requires the correct Z8 toolchain, device programming method, interrupt configuration, and peripheral initialization sequence. Typical uses include digital audio and communications, industrial signal conditioning, motor and motion control, communications equipment, and embedded systems that combine a control loop with real-time waveform processing. The LCC-84 format provides many external connections compared with a small leaded microcontroller package, making it suitable for systems requiring multiple peripheral, bus, and control signals while still allowing board-level miniaturization. PCB implementation requires careful attention to exposed-pad or thermal requirements if present, supply decoupling, signal integrity, and programming access. Because this is a fine-pitch leadless package, verify land geometry and assembly tolerances against the manufacturer package drawing. A new design should also confirm peripheral multiplexing and pin assignments in the datasheet rather than inferring them from the larger Z8 family. This product page organizes the available Z86C9533VSC identity, packaging information, sourcing path, and engineering considerations. It also separates documented facts from unverified numeric details, helping engineers move from part selection to datasheet verification without relying on assumptions about clock speed, memory size, or electrical performance.

Angebot Kontakt

Z86E0308PSG

Z86E0308PSG - 8-Bit Z8 OTP MCU, 8MHz | Zilog

The Zilog Z86E0308PSG is an 8-bit Z8 CMOS microcontroller with 512 bytes of one-time-programmable memory, an 8 MHz operating frequency, and support for 3.3 V or 5 V operation. It is packaged in an 18-pin PDIP. The device belongs to the Zilog Z8 family of small-format embedded microcontrollers designed for cost-sensitive control, monitoring, and simple peripheral-control applications. Its compact memory footprint, integrated digital control functions, and dual-voltage operation make it suitable for designs that need deterministic control without a larger application-specific processor. An OTP microcontroller stores programmed logic permanently, so the Z86E0308PSG is appropriate for finished products whose control firmware does not need field updates. The Z8 architecture uses an 8-bit instruction-oriented design and is commonly used for appliance controls, industrial interfaces, sensor conditioning systems, and embedded automation equipment. Its 3.3 V and 5 V capability helps designers support multiple supply environments without changing the controller family. The manufacturer identifies the Z86E0308PSG as an 8-bit MCU with 512-byte OTP memory and an 8 MHz maximum operating frequency. The 18-pin PDIP package provides a through-hole option for prototypes, educational designs, and production assemblies where leaded components are preferred. Because the exact peripheral allocation, electrical limits, pin names, and timing details are not listed in the retrieved product descriptions, engineers should use the Zilog Z86E03/E06 CMOS Z8 OTP Microcontrollers datasheet for the definitive pinout and timing reference. Typical implementations include simple motor and relay controllers, temperature and industrial monitoring units, keyboard interfaces, LED status panels, and low-cost embedded equipment. The 512-byte OTP limit is most suitable for compact control loops rather than protocol-heavy gateways, data logging, or applications requiring substantial RAM. In those designs, the MCU can handle discrete input decisions, timing, and peripheral coordination while external components provide sensing, actuation, communications, or power regulation. For a new layout, verify the 18-pin PDIP footprint, oscillator requirements, reset behavior, input thresholds, and programming procedure against the manufacturer datasheet before committing the PCB. Use the Request a Quote form on this page to request current commercial availability, lead time, and ordering information.

Angebot Kontakt

Z86E0308SSG

Z86E0308SSG - 8-Bit 8MHz OTP Microcontroller | Zilog

Zilog Z86E0308SSG is an 8-bit Z8 microcontroller with 512 bytes of one-time-programmable memory, an 8 MHz operating frequency, and a 3 V to 5.5 V supply range. The device is packaged in an 18-pin SOIC with a 300 mil body width for through-hole assembly compatibility. It combines a compact embedded-control footprint with OTP program memory for cost-sensitive, low-volume embedded products. An 8-bit microcontroller is a compact computing device designed to execute control logic, monitor inputs, and drive outputs within appliances, instruments, and industrial equipment. The Z86E0308SSG belongs to the Z8 microcontroller family, combining a processor core, OTP program memory, timers, and serial I/O in one package. This architecture suits sequential control tasks where deterministic behavior and low component count matter more than high-bandwidth processing. Principal characteristics include an 8 MHz clock, 512 bytes of OTP program memory, and operation across a 3 V to 5.5 V supply range. Its 18-pin SOIC-18-300mil package supports conventional PCB assembly and inspection. The industrial temperature classification, gull-wing terminal arrangement, and rectangular package geometry are useful constraints when laying out a new board or sourcing a mechanically similar replacement. The Z8 architecture is intended for embedded control rather than high-volume data processing. One-time-programmable memory makes the programmed version of the device suitable for products whose firmware does not require field updates. Because the memory cannot be rewritten after programming, production programming, blank-device handling, and firmware revision control must be planned before devices reach the assembly line. Typical uses include small appliance controllers, instrumentation front ends, industrial control modules, sensor interfaces, and dedicated timing or sequence-control products. In these applications, the MCU can evaluate digital inputs, operate timers, update displays, and communicate with external peripherals while keeping the external component count and board area modest. When designing a board, verify the exact pin assignments, port capabilities, oscillator requirements, and programming interface against the manufacturer datasheet before routing signals. The 300 mil SOIC body is wider than a narrow 150 mil SOIC, so component clearance, connector placement, and assembly tooling must accommodate the specified package rather than a generic 18-pin footprint. This page consolidates distributor specifications, package constraints, drop-in comparison information, and application-level engineering guidance. It also distinguishes documented parameters from values that must be confirmed with Zilog before schematic release, helping designers move from part selection to a controlled PCB and firmware implementation.

Angebot Kontakt

Z86E0412PEG

Z86E0412PEG - 8-Bit 12MHz OTP MCU | Zilog

Zilog Z86E0412PEG is an 8-bit Z8 CMOS microcontroller operating at up to 12 MHz, with 1 KB of one-time-programmable program memory, 125 bytes of RAM, and 14 I/O pins in an 18-pin DIP package. It is intended for compact control systems that require deterministic embedded control in a low-pin-count through-hole package. A microcontroller is a programmable semiconductor containing a processor core, program memory, data memory, and peripherals on one integrated circuit. The Z8 family combines an 8-bit CPU architecture with resources suited to appliance controls, industrial controllers, and small production systems. The Z86E0412PEG belongs to the one-time-programmable segment of this family, providing a practical path to firmware development and low-volume manufacturing without requiring a user-programmed flash-memory interface. The principal specifications include a 12 MHz maximum operating frequency, 1 KB of OTP program memory organized as 1K x 8, 125 bytes of RAM, and 14 I/O lines. Its operating supply range is 4.5 V to 5.5 V, while the specified temperature range extends from -40°C to +105°C. The DIP-18 package supports conventional through-hole PCB assembly and is useful when socketed prototyping, manual service, or legacy manufacturing processes are preferred. Its one-time-programmable architecture allows application firmware to be permanently written during production, providing a field-programmable appearance during development without a costly external programming interface. This is especially useful for small embedded products where the firmware does not need to be changed after deployment. Because OTP memory cannot be erased, revision control and production programming procedures should be planned carefully before a product reaches manufacturing. Typical applications include temperature or level control, small actuator controllers, appliance interfaces, discrete sensor-conditioning systems, and simple embedded control panels. The 14 I/O count provides useful connectivity for switches, indicators, relays, and digital sensors, while the 125-byte RAM can hold variables and short-lived state. Designers should verify peripheral availability, interrupt requirements, and timing behavior against the manufacturer datasheet for each selected function. The main design consideration is programming and validation. Develop the firmware on the target Z8 architecture, test production programming in a repeatable fixture, and verify every programmed image before release. The 4.5 V to 5.5 V supply requirement also means that the power source and all attached I/O devices must remain within compatible voltage levels. A 5 V supply with suitable local decoupling is the straightforward baseline when designing around this controller. This product page combines the core Z86E0412PEG specifications, commercial sourcing guidance, package information, application guidance, and the available drop-in comparison. It is designed to help engineers identify the correct Z8 controller, plan programming and PCB assembly, and determine whether the directly replaceable Z86E0412PEC variant satisfies the project requirements.

Angebot Kontakt

Z86E0412SEG

Z86E0412SEG - 8-Bit 12MHz 1KB OTP MCU | Zilog

Zilog Z86E0412SEG is an 8-bit Z8 microcontroller with a 12 MHz clock, 1 KB of one-time-programmable memory, 14 I/O ports, and an 18-pin SOIC package. It operates from a 4.5 V to 5.5 V supply and is specified for operation from -40°C to +105°C. The Z86E0412SEG combines a compact OTP MCU architecture with the Z8 family’s integrated peripherals and low-cost single-chip design. What is an 8-bit microcontroller? An 8-bit microcontroller is a programmable integrated circuit containing a central processing unit, nonvolatile program memory, data memory, and input/output peripherals on one chip. The Z86E0412SEG belongs to the Z8 family of MCUs, a semiconductor subtype of embedded controller. Its OTP program memory permits a device to be programmed once during manufacturing or prototype preparation, making it practical for cost-sensitive products with stable firmware. The principal characteristics include an 8-bit processor, 12 MHz operating speed, 1 KB of OTP memory organized as 1K × 8, and 14 I/O ports. Its 4.5 V to 5.5 V operating range accommodates conventional 5 V equipment, while the -40°C to +105°C rating supports industrial environments. The 18-pin SOIC-18, 300 mil package is also identified by some listings as an 18-pin plastic DIP-family package. Z86E0412SEG is a Zilog Z8 CISC controller intended for compact embedded-control tasks. One-time-programmable storage distinguishes it from field-reprogrammable Flash MCUs, eliminating the need for nonvolatile memory that can be updated after programming. The 14 I/O ports provide external control and monitoring points, while the 12 MHz clock supports time-dependent control, debouncing, signal sequencing, and communication tasks within the device’s stated limits. Typical applications include appliance controllers, small motor or relay-control boards, industrial interface modules, lighting controllers, instrumentation peripherals, and legacy equipment upgrades. Its combination of limited memory, 14 I/O ports, and a wide temperature range is well suited to simple control systems where the application does not require large firmware images or extensive connectivity. The OTP architecture is particularly appropriate when firmware will not change after deployment. Designers should verify oscillator configuration, pin multiplexing, and programming requirements against the Zilog datasheet before committing the PCB footprint. Because OTP memory cannot be rewritten, firmware validation and device programming must be complete before production programming. Decoupling should follow the manufacturer’s recommended power-network layout, and unused inputs should be configured to avoid unnecessary current consumption. This product page consolidates the Z86E0412SEG specifications, package information, family alternatives, and application-oriented design guidance. It also identifies the practical migration limits associated with one-time-programmable memory, helping engineers distinguish true family options from MCU replacements that require software and hardware requalification.

Angebot Kontakt

Z86E0612PSG

Z86E0612PSG - 12MHz 8-Bit OTP MCU with 1KB | Zilog

The Zilog Z86E0612PSG is an 8-bit Z8 microcontroller with a 12 MHz maximum operating frequency, 1 KB of one-time-programmable program memory, and 125 bytes of RAM in an 18-pin plastic DIP package. The device includes SPI connectivity, a power-on reset, a watchdog timer, and 14 general-purpose I/O pins. Its 3 V to 5.5 V supply range supports both 3.3 V and 5 V embedded systems. An 8-bit microcontroller is a compact processor architecture intended for control-oriented products in which modest computational performance, deterministic peripheral access, and low system complexity are more important than high bandwidth. The Z8 family combines the processor core, nonvolatile program memory, RAM, I/O, timing functions, and serial communications in one integrated circuit, reducing the component count required for embedded control, appliance control, industrial interfaces, and compact consumer products. The Z86E0612PSG centers on a Z8 CPU operating at up to 12 MHz. Its 1 KB OTP program memory is intended for compact control code that can be programmed once during manufacturing. The 125-byte RAM provides working storage for variables, state machines, and communication buffers. Fourteen I/O pins allow the device to operate as the central controller for digital inputs, outputs, indicators, and external interface signals. Communication and system-control peripherals broaden the device beyond simple GPIO control. The integrated SPI interface supports synchronous serial communication with sensors, displays, memories, and other SPI-compatible peripherals. A power-on reset establishes a known startup state, while the watchdog timer helps recover operation after a software fault. Together, these resources make the MCU appropriate for compact products whose firmware must remain small and whose board area is constrained. Typical applications include appliance control, simple sensor-hub controllers, LED and display interfaces, industrial control modules, access-control equipment, and compact embedded products. The 12 MHz operating speed provides useful responsiveness for interrupt-driven control loops, while the 1 KB memory limit strongly favors event-driven firmware, state-machine architecture, and code reuse. The 18-pin DIP package also facilitates prototyping and straightforward through-hole assembly. PCB planning should preserve access to the SPI interface, I/O pins, reset behavior, and programming or test points. Because program memory is OTP, firmware validation and production programming must occur before the component reaches the end customer. Developers should also budget for decoupling close to the supply pins and verify all external serial-device logic levels against the 3 V to 5.5 V operating range. This page consolidates the Z86E0612PSG electrical identity, package details, drop-in replacement candidates, application guidance, and design considerations into an engineering-focused reference. It supports part selection and board planning while helping teams distinguish confirmed device characteristics from parameters that still require confirmation from the manufacturer datasheet.

Angebot Kontakt

Z86E0612SSG

Z86E0612SSG - 8-Bit 12MHz 1KB OTP MCU | Zilog | Embedded Control

The Zilog Z86E0612SSG is an 8-bit Z8 microcontroller with a 12 MHz operating frequency, 1 KB of one-time-programmable program memory, and 124 bytes of RAM in an 18-pin SOIC package. It includes SPI connectivity, Power-On Reset, and a Watchdog Timer, making it suitable for compact embedded control, communication, and peripheral-control designs. An 8-bit microcontroller is a programmable semiconductor that integrates a central processing unit, memory, and peripherals into one device. The Z8 core follows the broader hierarchy of microcontroller, embedded processor, processor, and semiconductor. Compared with a general-purpose processor, this device targets smaller control systems where compact code and memory, deterministic peripheral control, and low system complexity are more important than application-processor performance. The Z86E0612SSG's principal features are its 12 MHz operating frequency, 1 KB OTP program memory, 124-byte RAM, SPI interface, Power-On Reset, and Watchdog Timer. The 1 KB OTP architecture suits final-production programs that do not require repeated field reprogramming. SPI provides a compact serial path for sensors, display controllers, memory devices, and other peripherals, while the Watchdog Timer supports recovery from unexpected program stalls. Its Z8 core is implemented as an 8-bit CISC microcontroller. Program execution, data storage, and peripheral interaction are integrated into one device, reducing the number of external components required for a small embedded controller. The 124-byte RAM provides working memory for variables and stack operations, while the OTP program memory imposes a fixed one-time programming constraint that should be considered before committing the device to a production design. Typical applications include small sensor-interface controllers, SPI peripheral hubs, industrial control modules, appliance control boards, and compact communication equipment. In these systems, the MCU can supervise a sensor or actuator, exchange data through SPI, and use its reset and watchdog functions to support stable operation after power application or a firmware fault. Design the power rail and signal paths around the manufacturer's electrical limits, and place the required bypass capacitors close to the supply pins. Because program memory is OTP, validate the complete firmware image and programming sequence during production testing. Confirm the exact pin functions, input thresholds, timing limits, and clock requirements in the Zilog manufacturer datasheet before releasing the PCB layout. This page consolidates the core Z86E0612SSG specifications, sourcing guidance, replacement considerations, and practical implementation notes into an engineering-focused resource that supports faster design review and production planning.

Angebot Kontakt

Unterkategorien

Produkte (38.000+)

Z84C0010FEC - 10MHz CMOS Z80 CPU, 44-LQFP | Zilog

Z84C0020PEC - 20 MHz Z80 CMOS CPU | Zilog | DIP-40

Z84C4310AEG - Z80 SIO/3 10MHz CMOS Serial I/O | Zilog

Z8673312PSG - 8-Bit 12MHz 8KB OTP Microcontroller | Zilog

Z8673312SSG - 8-Bit 12MHz OTP Microcontroller | Zilog

Z8674312PSG - 8-Bit 12MHz OTP Microcontroller | Zilog

Z86C9012ASG - 12MHz ROMless 8-bit MCU | Zilog

Z86C9012FSC - 12MHz 8-Bit ROMless MCU | Zilog

Z86C9012PEG - 8-Bit 12MHz ROMless MCU | Zilog

Z86C9116FEC - 16MHz 8-Bit ROMless MCU | Zilog | Embedded Control

Z86C9116FEG - 16MHz ROMless 8-Bit MCU | Zilog | Industrial

Z86C9116FSC 16MHz ROMless 8-Bit MCU | Zilog

Z86C9116PEG - 8-Bit 16MHz ROMless MCU | Zilog

Z86C9116PSG - 16MHz 8-Bit ROMless MCU | Zilog

Z86C9116VSG - 16MHz 8-Bit ROMless MCU | Zilog

Z86C9320FSC 8-Bit 20MHz ROMless MCU 44-LQFP | Zilog

Z86C9333FSC - 33MHz 8-Bit ROMless MCU | Zilog

Z86C9533VSC - CMOS Z8 DSP Microcontroller | Zilog

Z86E0308PSG - 8-Bit Z8 OTP MCU, 8MHz | Zilog

Z86E0308SSG - 8-Bit 8MHz OTP Microcontroller | Zilog

Z86E0412PEG - 8-Bit 12MHz OTP MCU | Zilog

Z86E0412SEG - 8-Bit 12MHz 1KB OTP MCU | Zilog

Z86E0612PSG - 12MHz 8-Bit OTP MCU with 1KB | Zilog

Z86E0612SSG - 8-Bit 12MHz 1KB OTP MCU | Zilog | Embedded Control