Integrierte Schaltungen

Unterkategorien

📁 ADC/DAC 3.100+ Produkte 📁 Verstärker-ICs 1.900+ Produkte 📁 Audio-Codecs 18 Produkte 📁 Audio-ICs 2 Produkte 📁 Takt & Timing 670+ Produkte 📁 Comparator ICs 1 Produkte 📁 DSP 1.100+ Produkte 📁 Datenakquise-ICs 2 Produkte 📁 Digitale Potentiometer 4 Produkte 📁 Display-Treiber & -Controller 1 Produkte 📁 FPGA & CPLD 7.300+ Produkte 📁 Schnittstellen-ICs 3.400+ Produkte 📁 LED-Treiber 1 Produkte 📁 Logik-ICs 460+ Produkte 📁 Speicher-ICs 870+ Produkte 📁 Mikrocontroller 20.000+ Produkte 📁 Mikroprozessoren 4 Produkte 📁 Motortreiber 1 Produkte 📁 Sonstiges 1 Produkte 📁 Sensor and Detector Interfaces 1 Produkte 📁 Spezialisierte ICs 15 Produkte 📁 Video-ICs 14 Produkte

Produkte (39.000+)

ICL7117CMH 3½-Digit ADC | Maxim Integrated | 44-Terminal QFP
ICL7117CMH

ICL7117CMH 3½-Digit ADC | Maxim Integrated | 44-Terminal QFP

The Maxim Integrated ICL7117CMH is a three-and-a-half-digit ADC with display hold, offered in a 44-terminal gull-wing QFP package. The verified product information identifies the device as an integrated circuit for data acquisition and ADC/DAC applications. Its package is specified as square, with 44 terminals, a 0.8 mm terminal pitch, and package dimensions of 10.0075 mm width and length. The ICL7117CMH designation is associated with Maxim Integrated products documented as ICL7117CMH and ICL7117CMH+ listings. An ADC is an analog-to-digital converter, a semiconductor that converts an analog input voltage into a digital representation. The ICL7117CMH belongs to the broader data-conversion and signal-processing hierarchy, where precision measurement systems commonly combine an analog input, a conversion engine, digital control or processing, and a display or communications interface. The display-hold function is intended to preserve a measured value so it can be viewed or transferred before the next conversion sequence changes the displayed result. The package information is the most concrete differentiator for PCB design. A 44-terminal gull-wing QFP provides external connections for power, analog input, digital output, reference, control, and display-related functions, subject to the exact pin assignment in the manufacturer datasheet. Its 0.8 mm terminal pitch allows a compact square surface-mount footprint, while the 10.0075 mm package dimensions require PCB land patterns and courtyard planning based on the manufacturer drawing. The QFP format also provides mechanical lead support and is generally more convenient for automated board assembly than a fine-pitch leadless package. ICL7117CMH is appropriate for panel meters, laboratory instruments, industrial monitoring equipment, digital weighing systems, process measurement, and other applications requiring a dedicated display-oriented ADC. In these systems, the converter accepts a conditioned analog signal, performs conversion, and presents a stable numerical result. The external circuitry normally defines the input range, reference voltage, integration timing, and display interface behavior. Designers should follow the Maxim ICL7117CMH datasheet for pinout, electrical limits, recommended input and reference networks, timing, and decoupling. Because the verified information does not state the complete electrical ratings, verify the converter resolution, input voltage range, reference arrangement, operating temperature range, supply requirements, and timing values against the manufacturer document before releasing a PCB or production design. This product page combines the verified package and product identity information with practical integration guidance, application mapping, and comparison context. It is intended to help engineers locate the correct ICL7117CMH documentation, understand the package implications, and plan a PCB or replacement review without treating general ADC characteristics as guaranteed ICL7117CMH specifications.

Angebot Kontakt
ICL7117CPL+ - 3.5-Digit Dual-Slope ADC | Maxim Integrated
ICL7117CPL+

ICL7117CPL+ - 3.5-Digit Dual-Slope ADC | Maxim Integrated

The Maxim Integrated ICL7117CPL+ is a 3.5-digit, low-power, dual-slope analog-to-digital converter with integrated display drivers, a reference, a clock, and a display Hold function. The device is packaged in a 40-pin PDIP and directly drives an instrument-size LED display. Its integrating architecture and very high input impedance suit precision measurement systems that need stable digital readings from relatively high source impedance. An integrating ADC such as the ICL7117CPL+ converts an analog input voltage into a digital result through repeated integration and reference measurement. This dual-slope method is well suited to meters and panel instruments because it provides high input impedance, rejects periodic interference, and can use simple passive input networks. The ICL7117 family adds a Hold pin to the ICL7106 and ICL7107 function, allowing a measured value to remain displayed for examination or transfer to another system. The ICL7117CPL+ integrates a 3.5-digit A/D converter, seven-segment LED display drivers, an internal reference, and a clock. Those functions reduce the number of external components required for a standalone display instrument. The Hold function is particularly useful when an operator must freeze a reading during calibration, inspection, or process monitoring without interrupting the ongoing measurement. The dual-slope conversion method supports rejection of interference at the conversion frequency. Its high input impedance also reduces loading of the sensing circuit, which is important when the input originates from bridges, thermocouples, or other relatively high-impedance sources. The exact conversion timing, input limits, resolution detail, reference voltage, and operating-temperature limits must be selected from the manufacturer data sheet when defining a production design. Typical uses include digital panel meters, laboratory instrumentation, process monitoring, temperature measurement, laboratory scales, and general-purpose industrial measurement panels. The integrated LED drivers make the ICL7117CPL+ particularly appropriate for displays built from conventional seven-segment LED digits rather than multiplexed glass LCDs. An ICL7116CPL+ is the corresponding LCD-oriented family member, while the ICL7117CPL+ supports LED display systems. Designers should preserve the recommended input and reference network, bypass placement, and display-driver layout described by Maxim Integrated. Because this is a through-hole PDIP device in a 40-pin package, PCB allocation must reserve the full footprint and adequate insertion clearance. Power, ground, reference, analog input, timing, and display-driver connections should be assigned directly from the package pin-description table and datasheet application example. This page combines the device architecture, display-function selection, practical layout guidance, package information, and same-footprint replacement analysis. It is intended to help engineers determine whether the ICL7117CPL+ provides the required LED display drive and Hold behavior without adding a separate ADC, display driver, clock, and reference to a measurement instrument.

Angebot Kontakt
ICL7117CQH - 3.5-Digit Dual-Slope ADC | Maxim Integrated
ICL7117CQH

ICL7117CQH - 3.5-Digit Dual-Slope ADC | Maxim Integrated

Maxim Integrated ICL7117CQH is a 3.5-digit monolithic dual-slope analog-to-digital converter with a parallel word output, built-in reference, bipolar input, and low-noise front end. It operates from a 6 V to 9 V supply in the commercial 0 °C to 70 °C temperature grade and is packaged in a 44-pin PLCC (QCCJ) surface-mount package. The converter is designed to directly drive seven-segment LED displays while providing a held digital measurement when the Hold function is asserted. An integrating analog-to-digital converter converts an unknown input voltage into elapsed time by charging and discharging an internal integration network. The ICL7117 belongs to the integrating ADC, dual-slope ADC, and precision measurement converter hierarchy. Unlike a successive-approximation ADC, a dual-slope converter rejects a substantial amount of periodic noise and is commonly used with panel meters, laboratory instruments, scales, and industrial measurement equipment. Principal characteristics include 3.5-digit measurement resolution, a reported 16-bit conversion word, single-channel operation, parallel word access, an integrated reference source, and support for bipolar input signals. The ICL7117 differs from the ICL7116 because it includes a Hold input and directly supports LED displays, whereas the ICL7116 is intended for LCD displays. This distinction makes pin and function compatibility with the ICL7116 unsuitable despite their shared converter heritage. The internal architecture combines a precision reference, comparator, integrator, timing section, digital counter, and display-driver outputs. Dual-slope conversion repeatedly measures input and reference intervals, producing a result that is effectively proportional to the ratio between the input voltage and the reference voltage. The reported 16-bit parallel output permits a host processor to capture the converted value without reproducing the internal counter timing, while the Hold input can freeze the displayed result during measurement or interface transactions. Typical uses include digital panel meters, laboratory measurement instruments, process-monitoring equipment, weighing systems, and embedded instrumentation with discrete LED displays. The 6 V to 9 V supply range suits systems that already provide a 9 V rail, while the commercial temperature grade targets indoor laboratory, industrial, and commercial equipment operating between 0 °C and 70 °C. Designers should pay particular attention to input polarity, reference accuracy, integration timing, display-driver compatibility, and the distinction between the Hold and Digit inputs. Confirm the complete QCCJ pin assignment and board footprint against the manufacturer data sheet before routing a replacement PCB or connecting LED segments. This product record combines the manufacturer's converter description with package, temperature, interface, and lifecycle information, then adds practical selection guidance and a package-focused comparison for engineers evaluating replacements without requiring a PCB change.

Angebot Kontakt
ICL7126CPL+ - 3.5-Digit Dual-Slope ADC | Analog Devices
ICL7126CPL+

ICL7126CPL+ - 3.5-Digit Dual-Slope ADC | Analog Devices

The Analog Devices ICL7126CPL+ is a low-power 3.5-digit dual-slope analog-to-digital converter with a 3 conversions-per-second conversion rate, integrated seven-segment decoders and display drivers, a voltage reference, and a clock circuit in a 40-pin PDIP package. The converter combines a complete measurement signal chain on one CMOS IC and directly supports a non-multiplexed LCD display. An integrating ADC such as the ICL7126 converts an analog input into a time-proportional digital result by repeatedly integrating the input and measuring the interval required to return to zero. Within the broader semiconductor hierarchy, the ICL7126 is a dual-slope ADC, which is an ADC, which is a data-conversion IC within integrated circuits. This makes it suitable for compact panel-meter and laboratory instrumentation designs where the display driver functions are useful. The principal verified features include 3.5-digit measurement resolution, a 3-SPS conversion rate, low power operation, a 40-pin PDIP package, and integrated segment decoders and drivers. The integrated voltage reference and clock reduce the number of external support circuits needed for a basic digital panel meter. The device also contains the active components required to implement a complete measurement system rather than operating only as a numeric converter. The ICL7126 uses a dual-slope conversion method, integrating both the unknown input and a known reference during successive measurement intervals. Its architecture is intended for high-input-impedance measurement systems. According to the Analog Devices product page, the monolithic converter directly drives a non-multiplexed LCD, while the Renesas datasheet identifies the ICL7126 as a plug-in replacement for the ICL7106 when only passive components are changed. Typical uses include digital panel meters, laboratory meters, process monitoring equipment, temperature and pressure instrumentation, and other low-rate measurement systems with a three-digit display. The integrated display drivers are especially useful when the measured quantity must be presented locally without requiring a separate display controller, microprocessor, or complex display multiplexer. The principal design consideration is that the analog front end, reference network, timing components, and LCD interface must be evaluated together rather than as independent blocks. Grounding, input filtering, reference stability, LCD contrast, and conversion timing determine whether the complete meter achieves useful accuracy. Designers should follow the manufacturer application guidance and verify the exact electrical limits against the current datasheet before finalizing component values. This product page consolidates verified manufacturer information, distributor availability, package details, replacement guidance, and engineering-oriented application guidance. It also distinguishes the verified ICL7126 family information from replacement candidates whose individual electrical ratings still require engineering confirmation against the latest manufacturer datasheets.

Angebot Kontakt
ICL7126CQH - 3.5-Digit LCD A/D Converter | Analog Devices
ICL7126CQH

ICL7126CQH - 3.5-Digit LCD A/D Converter | Analog Devices

Analog Devices ICL7126CQH is a low-power, 3.5-digit successive-approximation A/D converter designed for direct interface with liquid-crystal displays. The device provides seven-segment display decoding and display-driver functions in a 44-lead J-lead ceramic LCC package. It combines an A/D converter, internal reference, clock, seven-segment decoders, display drivers, and associated control functions on one CMOS integrated circuit. The ICL7126CQH belongs to the ADC/DAC category of signal-conversion semiconductors. An A/D converter, also called an analog-to-digital converter, transforms a continuously varying analog voltage into a numeric code suitable for measurement, display, control, or data acquisition. A 3.5-digit converter can resolve approximately 1999 principal counts and is commonly used for panel meters, laboratory instruments, industrial readouts, and portable measurement systems where more resolution than a simple three-digit display provides is useful. The manufacturer describes the ICL7126 family as a low-power device intended to drive liquid-crystal displays directly. Its integrated seven-segment decoders reduce the external logic required between the conversion result and the LCD. Direct LCD drive simplifies instrument construction by limiting the main external circuitry to the input network, timing components, display connections, and normal bypass or protection components described in the manufacturer data sheet. The ICL7126CQH is specified in the 44-LCC J-lead package and appears on the manufacturer's product page as a production product. Analog Devices also recommends the ICL7136 for new designs, which is an important lifecycle consideration when selecting between continued use of an established converter and migration to a newer family member. The exact electrical limits, conversion timing, input impedance, reference characteristics, display-drive specifications, and environmental ratings should be taken from the ICL7126 manufacturer data sheet before release of a production circuit. Common uses include digital panel meters, digital multimeters, laboratory measurement instruments, temperature controllers, process-monitoring displays, weighing systems, and portable data-acquisition equipment. The integrated display path is particularly useful where designers want a numeric readout without adding a separate display decoder or driver IC. When designing around the ICL7126CQH, begin with the manufacturer pin-description table and application information rather than assigning signals by function alone. Confirm the LCD glass segment mapping, input-source range, reference arrangement, timing components, and bypass requirements directly against the data sheet. Also evaluate the suggested ICL7136 before committing to a long-lived design if the project is newly started. This page organizes the verified package, display, resolution, interface, lifecycle, and sourcing details into an engineering-focused format. It also separates confirmed attributes from parameters that require direct comparison against the manufacturer data sheet, helping designers assess fit before committing the 44-LCC footprint to a PCB layout.

Angebot Kontakt
ICL7126IPL+ - 3.5-Digit CMOS ADC | Maxim Integrated
ICL7126IPL+

ICL7126IPL+ - 3.5-Digit CMOS ADC | Maxim Integrated

The Maxim Integrated ICL7126IPL+ is a low-power, 3.5-digit successive-approximation A/D converter with an integrated voltage reference and clock, supplied in a 40-pin PDIP package. The converter is designed for low-power measurement systems and uses a differential input architecture with a resolution of 0.05 percent. The ICL7126IPL+ is the commercial-temperature, through-hole version of the ICL7126 family, with an operating range of 0°C to 70°C. An ADC is an interface component that converts an analog voltage into a numeric value for measurement, control, or display. The ICL7126 integrates the active circuitry required for a complete 3.5-digit measurement channel on one CMOS IC. Unlike discrete meter designs, its integrated reference, clock, and conversion system reduce component count while retaining direct measurement of slowly changing voltages. Key features include a true differential input and reference arrangement, a guaranteed zero reading for a zero-volt input, and true polarity at zero for precise null detection. The converter also provides approximately 1 pA typical input current. Its 3.5-digit architecture supports instrumentation displays and panel-meter applications where four digits of resolution are useful while a sign indicator improves readability around the zero point. The CMOS implementation emphasizes low operating power, making the device suitable for portable instruments and battery-operated measurement panels. Integration of the reference and clock simplifies board design by reducing the number of external timing and calibration components. Differential measurement can also reject common-mode voltage when the source and reference paths are arranged carefully, although real-world accuracy still depends on input filtering, reference quality, grounding, and analog-layout discipline. Typical uses include digital panel meters, laboratory measurement instruments, temperature and process monitoring, portable test equipment, and low-power sensor interfaces. The 40-pin PDIP package favors through-hole assembly, repairable prototypes, and larger industrial control boards where a surface-mount footprint would offer little practical benefit. Designers should verify the complete electrical limits and recommended operating circuit in the manufacturer datasheet before release. Pay particular attention to input and reference polarity, conversion timing, bypass-capacitor placement, and the relationship between source impedance and accuracy. A stable, low-noise reference path and short analog traces are essential for repeatable measurements. This product page combines the manufacturer product information with package-specific identification, application guidance, verified sourcing information, and drop-in replacement analysis. It also highlights the practical advantages and limitations of the 40-pin PDIP format for engineers deciding whether the ICL7126IPL+ fits an existing measurement-instrument design.

Angebot Kontakt
ICL7129CPL - 4.5-Digit LCD ADC | Intersil | 40-Pin PDIP
ICL7129CPL

ICL7129CPL - 4.5-Digit LCD ADC | Intersil | 40-Pin PDIP

Intersil Corporation ICL7129CPL is a 4.5-digit single-chip analog-to-digital converter that directly drives a multiplexed liquid-crystal display. The device combines successive-integration conversion, a precision reference input, and LCD segment-driver circuitry in a 40-pin PDIP package. It is intended for high-resolution measurement instruments where a stable digital reading and direct LCD presentation are required without a separate display driver. An LCD analog-to-digital converter is a specialized mixed-signal component that converts an analog input voltage into a numeric code and presents that code on a multiplexed LCD. The ICL7129 belongs to the broader ADC hierarchy while specializing in direct LCD instrumentation. Compared with general-purpose ADC systems, this integrated approach reduces the number of external components and simplifies the relationship between the conversion engine, digit and segment outputs, and the display. The ICL7129CPL provides 4.5-digit measurement resolution and uses the ICL7129 family's successive-integration conversion technique. The associated ICL7129A documentation identifies approximately ±20,000-count resolution, which supports fine readings in handheld meters and laboratory instruments. Direct LCD drive, CMOS construction, and a 40-pin dual in-line package make the device suitable for conventional through-hole instrument designs. Technical operation centers on the integrated successive-conversion loop, reference voltage, input stage, and display multiplexing. Only passive components and an external reference are needed for normal operation. Because the LCD outputs belong to the same package as the converter, segment-drive timing, reference stability, input filtering, and grounding directly influence displayed accuracy. The converter must also be matched to the selected LCD segment count and operating scheme. Typical uses include handheld digital multimeters, laboratory panel meters, industrial process indicators, temperature instruments, weighing displays, and general-purpose measurement panels. The device is particularly appropriate when a dedicated LCD and a 4.5-digit presentation are central to the product. It can also serve in legacy or repair applications where preserving the established 40-pin PDIP footprint and LCD interface is more important than adopting a newer display architecture. Designers should follow the manufacturer's pin-description and typical-application diagrams when assigning the reference, analog input, conversion-control signals, and LCD outputs. Keep the analog input and reference paths away from LCD drive traces and switching nodes, and place filtering or protection components close to their corresponding pins. Confirm LCD compatibility, reference voltage, timing, and grounding before releasing a new PCB. This product summary combines the ICL7129CPL identification, package information, converter architecture, display use cases, and drop-in family options into an engineering-focused reference. It also highlights the component-selection checks that matter when replacing a 4.5-digit LCD measurement front end without changing the existing through-hole board layout.

Angebot Kontakt
ICL7135CAI+ - 4.5-Digit Dual-Slope ADC | Analog Devices
ICL7135CAI+

ICL7135CAI+ - 4.5-Digit Dual-Slope ADC | Analog Devices

The Analog Devices ICL7135CAI+ is a high-precision, monolithic 4.5-digit dual-slope analog-to-digital converter with a 2.0000 V full-scale capability and accuracy specified to ±1 count in 20,000. It accepts high-impedance differential inputs and provides multiplexed BCD outputs for driving a display in the 28-SSOP package. The converter combines reliable dual-slope conversion with a 0.5-count resolution increment. A dual-slope ADC is an integrating analog-to-digital converter that measures input voltage by comparing a controlled integration period with a reference-driven de-integration period. This technique belongs to the wider ADC, data-converter, and semiconductor hierarchies. It is especially useful when low-frequency measurements require good noise rejection and predictable behavior with slow-changing sensor signals. The ICL7135CAI+ provides a 4.5-digit measurement range, a 2.0000 V full-scale capability, and ±1 count in 20,000 accuracy. Its high-impedance differential input structure supports source impedances that would otherwise degrade simple resistive divider measurements. Multiplexed BCD outputs reduce the number of connections required when driving a seven-segment display, while the 28-SSOP format supports compact panel-meter and laboratory-instrument layouts. The manufacturer describes the ICL7135 as a monolithic converter designed around a dual-slope conversion architecture. Differential input handling is central to its measurement behavior because it permits a sensor signal to be measured relative to a return or reference node. The 4.5-digit result format supports a maximum reading of 19,999 counts, while the stated ±1-count-in-20,000 accuracy establishes the conversion-error target for the product family. Typical uses include digital panel meters, temperature measurement instruments, laboratory readouts, process monitoring, portable meters, and industrial measurement equipment. The device is particularly appropriate when a regulated reference, controlled input excitation, and a dedicated display interface are available. It is less suitable for high-speed waveform acquisition, communications, or applications requiring many conversions per second. For implementation, follow the manufacturer pin-description and application tables when assigning the reference, integrator, input, clock, and display signals. Stable reference and input components are central to repeatable dual-slope measurements, while correct grounding and protection are necessary when external sensors connect to the measurement terminals. This product record combines the official ICL7135 product information with distributor package, ordering, and availability details. It also distinguishes the closely related ICL7135CAI- temperature-grade variant from the ICL7135CMH-D, which uses a different 44-pin package, so engineers can assess replacement options without treating package-incompatible parts as drop-in substitutes.

Angebot Kontakt
ICL7135CN 4.5-Digit Precision ADC | Texas Instruments
ICL7135CN

ICL7135CN 4.5-Digit Precision ADC | Texas Instruments

The Texas Instruments ICL7135CN is a 4.5-digit precision dual-slope analog-to-digital converter with one differential input, 0.003 kSPS conversion rate, multiplexed BCD output, and a 2.0000 V full-scale capability in a 28-pin through-hole DIP package. The supplied distributor data identifies it as a display-driver ADC with ±1 count in 20,000 accuracy and high-impedance differential inputs. What is a dual-slope ADC? A dual-slope ADC integrates an unknown input for a fixed interval and then measures the time required for a reference to return the integrator toward zero. This method is well suited to precision measurement because it rejects periodic noise, averages short disturbances, and can provide high effective resolution with relatively simple analog circuitry. ICL7135CN belongs to the analog-to-digital converter, data-converter, and signal-measurement semiconductor hierarchy. Key features include 4.5-digit BCD-oriented measurement resolution, 2.0000 V full scale, multiplexed BCD output, true differential input, precision zero reading for a 0 V input, and precision null detection with true polarity at zero. The converter is intended for instrumentation applications where repeatable readings and direct display-driver compatibility matter more than high conversion throughput. Its dual-slope architecture favors noise rejection over sampling speed. The ICL7135CN integrates a successive approximation and dual-slope conversion approach according to the verified product descriptions. The external reference and input arrangement must be selected to match the intended measurement range, while the display interface is organized for multiplexed BCD output. Because the supplied search results identify a 28-pin DIP package, the physical design should use the appropriate through-hole footprint and pin assignments shown in the manufacturer documentation. Typical applications include digital panel meters, laboratory instruments, weighing systems, temperature measurement bridges, industrial process monitors, and precision test equipment. These systems benefit from the 4.5-digit readout, differential input capability, and ability to present decimal-aligned BCD results directly to display-driver circuitry. The relatively low conversion rate is suitable for continuously updated measurements rather than waveform acquisition or high-speed data logging. Designers should pay particular attention to reference stability, input impedance, integrator components, timing accuracy, bypass capacitors, and display-drive timing. Use the manufacturer datasheet for the complete electrical limits and pinout, and verify the zero-input and null-detection behavior during calibration. This page combines verified distributor descriptions with engineering guidance while avoiding unverified electrical values that are not present in the supplied data.

Angebot Kontakt
ICL7135CPI+ 4.5-Digit BCD ADC | Maxim Integrated
ICL7135CPI+

ICL7135CPI+ 4.5-Digit BCD ADC | Maxim Integrated

The Maxim Integrated ICL7135CPI+ is a 4.5-digit, BCD-output analog-to-digital converter with multiplexed display outputs in a 28-pin plastic DIP package. It combines dual-slope conversion reliability with an accuracy of ±1 count in 20,000 and a full-scale range of 2.0000 V. The differential input architecture supports measurement systems requiring high input impedance and rejection of common-mode interference. A dual-slope integrating ADC is a signal-conditioning and conversion category that averages an unknown voltage over a fixed integration interval and compares the result with a reference. Within the broader hierarchy, the ICL7135CPI+ is an analog-to-digital converter, an integrated data-conversion circuit, and a semiconductor intended for precision measurement and display instrumentation. Dual-slope conversion is especially useful when resistance, temperature, or slow-changing sensor signals are converted into stable numerical readings. The principal feature set includes 4.5-digit resolution, multiplexed binary-coded decimal outputs for four digit-drive positions, and high-impedance differential inputs. The ±1-count-in-20,000 accuracy specification provides a useful figure for panel meters and digital voltmeters. Its 2.0000 V full-scale capability lets the designer define the measurable range with an external reference. The multiplexed BCD architecture reduces the number of dedicated output signals required to drive a visual display. Technically, the converter separates its analog and digital functions. The analog section develops an integrated representation of the differential input, while the digital section contains counters, timing control, input interfaces, output interfaces, and the logic that coordinates each measurement cycle. This integrating approach favors noise rejection and repeatable readings when the input changes slowly, although conversion time is longer than with a high-speed successive-approximation ADC. Typical uses include digital panel meters, digital voltmeters, laboratory instruments, temperature-measurement panels, process-monitoring displays, and weighing equipment. The ICL7135CPI+ is especially appropriate when a readable decimal display, differential input, and deterministic integration cycle are more important than high conversion throughput. The BCD outputs are intended to interface naturally with digit drivers and display-oriented instrument designs. Designers should verify reference accuracy, input-common-mode range, integration-cycle timing, digit-driver polarity, and display multiplexing against the manufacturer datasheet before layout release. Because this is a through-hole 28-pin DIP device, its physical package differs from surface-mount display ADC families and should not be treated as a board-level equivalent. The manufacturer datasheet remains the controlling source for pin names, timing, and electrical limits. This page consolidates the verified distributor price, package information, function description, available drop-in candidates, comparison parameters, and practical design cautions. That engineering-focused context helps buyers distinguish a genuine 28-pin replacement from a merely similar 4.5-digit converter and supports faster qualification without replacing the manufacturer datasheet as the authoritative design reference.

Angebot Kontakt
ICL7135CQI+ - 4.5-Digit Differential ADC | Analog Devices
ICL7135CQI+

ICL7135CQI+ - 4.5-Digit Differential ADC | Analog Devices

The Analog Devices ICL7135CQI+ is a 4.5-digit monolithic analog-to-digital converter with differential inputs, multiplexed BCD outputs, and a 28-pin PLCC package. The device combines a 2.0000 V full-scale input capability with accuracy specified as ±1 count in 20,000 and is designed for precision measurement systems requiring direct BCD display output. A dual-slope ADC is a signal-conversion architecture that integrates an unknown input voltage over a defined interval and compares it with a reference-driven ramp. In a broader hierarchy, the ICL7135CQI+ is an ADC, a data-converter IC, and a precision measurement component. Its BCD outputs can reduce the display-processing burden in instruments, while differential input architecture helps reject common-mode disturbances when suitable source and reference arrangements are used. Key characteristics include 4.5-digit resolution, differential analog inputs, multiplexed parallel BCD outputs, and dual output polarity. The Analog Devices product page identifies the ICL7135 as a high-precision monolithic converter with ±1 count in 20,000 accuracy. These attributes make it applicable to laboratory instruments, panel meters, weighing systems, temperature measurement, and other linear analog measurement products. The converter architecture divides each measurement cycle into distinct phases controlled by internal counters, input interfaces, output interfaces, and control logic. Its differential input stage operates with high input impedance, which is useful when measuring slowly changing sensor signals and when the source impedance is not extremely low. The 2.0000 V full-scale reference requirement also places a clear constraint on analog front-end and reference design. Typical applications include digital panel meters, laboratory measurement equipment, process monitoring, resistance and temperature measurement, and other display-oriented instruments. The multiplexed BCD outputs are particularly useful when the measured value must be presented directly through seven-segment display drivers without requiring a complex digital data bus. For PCB implementation, place the input, reference, and bypass connections according to the manufacturer datasheet and keep sensitive analog routing compact. Designers should also verify timing, conversion-cycle behavior, display multiplexing requirements, and output logic levels against the target instrument rather than treating the converter as a generic modern high-speed ADC. This product page organizes the verified technical characteristics, sourcing information, drop-in candidate assessment, application guidance, and design considerations around the ICL7135CQI+. It is intended to help engineers determine whether its dual-slope architecture, BCD interface, differential inputs, and 28-pin PLCC package fit a precision display-oriented measurement design.

Angebot Kontakt
ICL7136CDL - 3.5-Digit LCD A/D Converter | Analog Devices
ICL7136CDL

ICL7136CDL - 3.5-Digit LCD A/D Converter | Analog Devices

The Analog Devices ICL7136CDL is a low-power 3.5-digit analog-to-digital converter with integrated seven-segment decoders, display drivers, voltage reference, and clock circuitry in a 40-pin CERDIP package. It is designed for direct interface with a liquid-crystal display and supports measurements with very high input impedance, reducing the loading applied to the sensed signal. An integrated A/D converter is a mixed-signal IC that converts an analog input voltage into a digital numeric value. The ICL7136 belongs to the ADC/DAC category, combines data conversion with display-interface functions, and is used where a compact measurement system must present a value directly on an LCD. Unlike a discrete measurement design, it integrates the conversion, reference, clock, decoding, and display-driving blocks into one device. The converter provides 3.5-digit resolution, low-power operation, seven-segment display decoding, LCD segment drivers, a multiplexed LCD backplane output, an internal voltage reference, and an integrated clock. Overrange recovery is an improvement over the earlier ICL7126. The available product listing identifies the ICL7136CDL specifically as a 40-CERDIP device, making it suitable for established through-hole industrial, laboratory, and instrumentation designs. Internally, the device combines successive-approximation conversion techniques with the supporting analog and digital blocks needed for autonomous panel measurement. The integrated reference reduces the number of precision external components, while the high-impedance input helps preserve the accuracy of the signal under test. The segment decoders and LCD drivers reduce display-interface complexity compared with a general-purpose converter followed by a separate display controller. Typical applications include digital panel meters, laboratory measurement instruments, temperature measurement systems, process-monitoring equipment, weighing indicators, and portable diagnostic instruments. In each case, the converter can drive the LCD directly while the external analog front end determines the measured quantity. The LCD architecture also suits handheld or bench instruments where a numerical display is more practical than a host-controlled graphical interface. Designers should verify the complete electrical limits, reference accuracy, conversion timing, input ranges, and display compatibility against the manufacturer datasheet before release. PCB layout must preserve the pinout of the 40-pin CERDIP footprint, provide adequate bypass capacitance, and keep sensitive analog-input routing away from display-driver and clock signals. External component values and timing requirements should not be inferred from generic ADC designs. This page combines verified manufacturer and distributor information, structured specifications, application guidance, sourcing questions, and explicitly recorded data gaps. It does not present unsupported electrical values as facts; unavailable parameters remain clearly identified in the specification table for engineering review.

Angebot Kontakt
ICL7136CMH - Low-Power 3.5-Digit ADC | Analog Devices
ICL7136CMH

ICL7136CMH - Low-Power 3.5-Digit ADC | Analog Devices

The Analog Devices ICL7136CMH is a low-power, 3.5-digit dual-slope analog-to-digital converter with automatic calibration, true differential input, and differential reference capability in a 44-pin MQFP package measuring 10 mm by 10 mm. Its primary specifications include a 3.5-digit resolution, 9 V operating supply, and 500 mW power dissipation rating. An ADC is a semiconductor that converts an analog voltage into a numeric value. The ICL7136 belongs to the dual-slope ADC family, a class of converters that integrates an input signal over a fixed interval and measures the resulting integration time against a reference. This technique is well suited to instruments where predictable behavior, rejection of periodic interference, and usable resolution matter more than very high conversion speed. Key features include automatic calibration, true differential input, and a differential reference arrangement. Automatic calibration helps establish a repeatable measurement baseline, while the dual-slope architecture rejects interference signals common in industrial environments. Differential measurements also support ratiometric sensing, where output code depends on the ratio of an unknown input to a related reference. The ICL7136 integrates a 3.5-digit BCD-to-seven-segment display driver, allowing measured values to be presented directly on common digital display devices. This combination of measurement and display excitation simplifies panel-meter, laboratory-instrument, and industrial-control designs by reducing the number of external interface components. Typical uses include digital panel meters, temperature measurement systems, resistive and bridge transducers, laboratory meters, and process-monitoring equipment. The differential input and reference architecture is particularly useful in ratiometric measurements, where sensing-element drift can be reduced when the excitation and measurement paths share corresponding variations. When designing around the ICL7136CMH, preserve the analog and reference layout implied by the manufacturer application guidance, use suitable input and reference filtering, and verify display-drive compatibility with the selected seven-segment display. Because the MQFP-44 package has fine-pitch leads and a thermal pad, assembly and layout planning should account for lead geometry, soldering process, and thermal dissipation. This product page consolidates the confirmed ICL7136 family characteristics, sourcing information, same-package alternatives, and practical selection guidance. It helps engineers compare the commercial-grade ICL7136 variants by package, temperature range, supply voltage, and power rating before committing to a PCB footprint.

Angebot Kontakt
ICL7136CPL+ - 3.5-Digit LCD A/D Converter | Analog Devices
ICL7136CPL+

ICL7136CPL+ - 3.5-Digit LCD A/D Converter | Analog Devices

Analog Devices ICL7136CPL+ is a low-power, 3.5-digit monolithic analog-to-digital converter with integrated seven-segment decoders, display drivers, voltage reference, and clock circuitry. The device is designed to interface directly with a non-multiplexed liquid-crystal display and includes a 40-pin PDIP package. Its headline specifications are 3.5-digit resolution, differential and single-ended input operation, and low-power conversion in a display-oriented integrated circuit. An integrated 3.5-digit A/D converter combines analog measurement, digital conversion, and display excitation in one package. This type of converter is used where a compact instrument must display a measured voltage, current, resistance, or temperature without requiring a separate display driver. The ICL7136CPL+ uses a dual-slope conversion technique, providing a measurement architecture suited to stable, low-rate instrumentation rather than high-speed signal acquisition. The ICL7136CPL+ includes onboard segment drivers, segment decoders, a voltage reference, and a clock, reducing the number of external display-support components required. The Analog Devices product page identifies it as a production part and describes it as a low-power 3 1/2-digit A/D converter. The integrated display interface is intended for LCD displays, while the converter's differential-input capability supports measurement arrangements that reject common-mode effects when used with suitable input circuitry. The dual-slope conversion method integrates the input over a fixed interval, providing a measurement result that is less sensitive to certain noise and timing variations than a simple instantaneous conversion. The device is intended for panel meters, digital instruments, laboratory measurement equipment, and other systems where a stable numeric display is required. External passive components and the selected input network remain important for achieving the intended accuracy and input impedance. Typical uses include handheld meters, process-monitoring displays, temperature-measurement instruments, laboratory equipment, and embedded display panels. In each case, the ICL7136CPL+ can combine the measurement front end and LCD drive functions while leaving the host system free to focus on control, data logging, or user interaction. Designers should follow the manufacturer pin-description table when assigning PCB nets and should confirm the display polarity, segment count, input configuration, reference arrangement, and bypass requirements against the manufacturer datasheet. The 40-pin PDIP footprint is mechanically straightforward but occupies substantial board area, so DIP availability and assembly method should be checked during product planning. This product page consolidates the ICL7136 family specifications, verified package information, sourcing guidance, comparison parameters, and practical replacement considerations to support faster engineering evaluation and board-level planning.

Angebot Kontakt
ICL7136CQH+ - Low-Power 3.5-Digit LCD A/D Converter | Analog Devices
ICL7136CQH+

ICL7136CQH+ - Low-Power 3.5-Digit LCD A/D Converter | Analog Devices

Analog Devices ICL7136CQH+ is a low-power, 3.5-digit monolithic analog-to-digital converter with integrated LCD display-driver circuitry. The device is designed for measurement systems that require a high-input-impedance front end and direct excitation of a non-multiplexed liquid-crystal display. Its integrated block includes segment drivers, segment decoders, a voltage reference, and a clock circuit, reducing the need for external display-drive circuitry in suitable instrument designs. The ICL7136CQH+ is associated with the Maxim Integrated ICL7136 family and is offered in a 44-lead PLCC, or 44-LCC J-lead, package. A 3.5-digit A/D converter is commonly used for panel meters, laboratory instruments, process monitoring, weighing equipment, and portable measurement equipment. The 3.5-digit format provides adequate resolution for displaying a signed or unsigned measurement while maintaining a compact instrument layout. Because the ICL7136 integrates the display interface, the converter can be paired directly with a compatible non-multiplexed LCD when the display and board requirements match the device's electrical and timing specifications. The ICL7136 architecture is based on a dual-slope conversion approach, a technique commonly used in precision panel-meter converters because it provides good rejection of periodic noise when the integration and reference relationships are designed appropriately. The high input impedance helps isolate the measurement node from the converter input, allowing the sensor or signal-conditioning network to be designed around the required source impedance and measurement range. The integrated voltage reference and clock support a self-contained measurement channel, while the LCD outputs reduce the number of external display-driver connections. The ICL7136CQH+ is particularly relevant to industrial and laboratory instrumentation where a dedicated numeric LCD readout is preferred over a high-speed sampled data converter. The package and function make it suitable for panel-meter products, handheld test equipment, digital laboratory instruments, process indicators, and data-acquisition front ends with relatively slow measurement requirements. When evaluating the device, check the electrical limits, input configuration, reference requirements, display timing, and pin-specific connection requirements in the manufacturer data sheet. The 44-lead PLCC package is a through-hole, leaded surface-mount-style package with J-leads, making it different from small-outline and fine-pitch packages used in newer compact instruments. The principal design trade-off is integration and display convenience versus package size and the need to design around the converter's specified operating conditions. For new designs, confirm the exact package variant, temperature range, supply requirements, and pin assignment against the current Analog Devices or Maxim Integrated documentation.

Angebot Kontakt
ICL7137CDL - Dual-Slope 4.5-Digit ADC | Analog Devices
ICL7137CDL

ICL7137CDL - Dual-Slope 4.5-Digit ADC | Analog Devices

Analog Devices ICL7137CDL is a monolithic 4.5-digit dual-slope analog-to-digital converter designed to drive a light-emitting diode display directly. It operates from a bipolar power supply, supports automatic calibration, and draws less than 200 uA of supply current when LED display current is excluded. The converter is packaged in a commercial-grade, 40-pin through-hole DIP. The ICL7137CDL combines an analog input stage, dual-slope conversion system, digital counter, and display-driving circuitry in one integrated circuit. A dual-slope ADC is a type of integrating analog-to-digital converter that measures an unknown input voltage by integrating it for a fixed interval and then measuring the time required to return the integrator to zero. This technique provides good noise immunity for slowly changing signals, including outputs from temperature sensors, pressure transducers, strain gauges, and slow analog measurement systems. The ICL7137 family also incorporates auto-zeroing and auto-calibration functions intended to reduce offset and gain-related errors. The principal operating characteristics include a commercial temperature range of 0 C to +70 C, bipolar supply operation, automatic calibration, and supply current below 200 uA excluding display current. The low power consumption makes the converter suitable for battery-operated instruments and portable measurement equipment. The direct LED-display interface reduces the need for external display drivers, while the 40-pin DIP package supports conventional through-hole PCB assembly and prototyping. ICL7137CDL is most appropriate for precision digital voltmeters, panel meters, laboratory measurement equipment, temperature controllers, load-cell instrumentation, and general-purpose slow-rate data acquisition. When designing around the converter, the input signal range, reference voltage, integration period, system resolution, and display driver requirements must be evaluated together. A stable reference and carefully routed analog inputs are important because both directly influence conversion accuracy and repeatability. Thermal and supply design should account for the component's bipolar supply arrangement and the power contribution from the display. The datasheet should be consulted for the complete electrical limits, recommended operating conditions, input and reference topology, timing relationships, and pin descriptions before laying out a new board. Commercial temperature grade makes this suffix appropriate for indoor laboratory and industrial equipment where the specified ambient range is respected. This page consolidates the verified product characteristics, comparison limits, application guidance, and replacement considerations. It also identifies unresolved technical fields explicitly so engineers can distinguish documented operating facts from parameters that must be confirmed in the manufacturer datasheet before production release.

Angebot Kontakt
ICL7137CMH - 3.5-Digit LED ADC | Maxim Integrated
ICL7137CMH

ICL7137CMH - 3.5-Digit LED ADC | Maxim Integrated

The Maxim Integrated ICL7137CMH is a monolithic 3.5-digit dual-slope analog-to-digital converter with active devices that directly interface with an LED display. The converter is packaged in a 44-pin MQFP measuring 10 x 10 mm and is identified as a one-channel ADC for LED display instrumentation. According to the Analog Devices product page, the ICL7137 consumes less than 200 uA, excluding the current required by the LED display, making it suitable for battery-operated instruments. An integrated 3.5-digit LED display ADC is a specialized data-converter and display-control component. It combines analog measurement, digital counting, and display drive functions in one monolithic device. The dual-slope conversion technique used by the ICL7137 integrates the input voltage over a fixed interval, rejecting periodic noise and providing accurate results for slow-moving or repetitive measurements. This architecture fits the hierarchy ADC > data converter > integrated circuit > semiconductor. The defining feature of the ICL7137 is direct LED-display support. Unlike a general-purpose ADC that outputs only a digital code, the device includes the active circuitry needed to illuminate a multiplexed seven-segment display. The 3.5-digit format supports readings from negative 999 through positive 999, subject to the detailed reference, input, and operating conditions in the manufacturer datasheet. Its low supply current makes it especially relevant to handheld meters, panel instruments, and portable measurement systems. Dual-slope conversion offers useful advantages for panel meters because its accuracy does not depend on a high-frequency clock being multiplied into the measurement result in the same way as many successive-approximation converters. The averaging behavior helps attenuate periodic interference. The manufacturer describes versatility and accuracy as inherent features of the converter, while the integrated clock, reference, counter, and display-driver functions reduce the external component count required for a complete measurement instrument. Typical implementations include digital multimeters, laboratory panel meters, temperature-measurement instruments, process-monitoring displays, laboratory equipment, and battery-powered meters. The direct LED interface is especially valuable when a readable numerical display is required at the point of measurement. Such systems can use the converter without adding a separate display decoder or segment driver, reducing board area and simplifying firmware requirements. The main design considerations are reference stability, input-range implementation, display current, layout, and timing. The input and reference networks must be designed around the electrical limits specified by the manufacturer datasheet. Display resistors and LED current determine brightness and power consumption, while the under-200-uA supply-current figure explicitly excludes display current. PCB placement should keep analog input, reference, and clock paths away from display-return currents and switching nodes. This page organizes the ICL7137CMH specifications, package information, sourcing path, practical use cases, and verified same-footprint alternatives. It also separates the low converter supply consumption from the additional power demanded by the LED display, helping engineers evaluate both instrument accuracy and battery-life requirements before selecting the ADC and display circuitry.

Angebot Kontakt
ICL7137CPL+ - Low-Power 3.5-Digit A/D Converter | Analog Devices
ICL7137CPL+

ICL7137CPL+ - Low-Power 3.5-Digit A/D Converter | Analog Devices

Analog Devices / Maxim Integrated ICL7137CPL+ is a low-power, 3.5-digit monolithic analog-to-digital converter with an integrated LED display driver, supplied in a 40-pin PDIP package. The device uses a dual-slope conversion technique and is designed to interface directly with common LED displays. According to the manufacturer product information, the ICL7137 supply current is under 200 microamps when LED display current is excluded, making the converter suitable for battery-operated instrumentation and low-power measurement systems. The ICL7137CPL+ belongs to the broader analog-to-digital converter and display-driver hierarchy. A 3.5-digit A/D converter produces a numeric measurement for meters, laboratory instruments, panel displays, and portable equipment. The ICL7137 combines the converter, control logic, reference-related circuitry, and active LED display-drive outputs in one device, reducing the need for separate display-driver circuitry. Its 40-pin PDIP package is intended for through-hole PCB assembly rather than compact surface-mount designs. Key verified characteristics include a 3.5-digit measurement format, direct LED display support, low-power operation, and a supply current below 200 microamps excluding LED display current. The converter uses a dual-slope conversion technique, which is suited to applications where repeatable measurement results and resistance to some noise sources are more important than very high conversion throughput. The product is identified by the ICL7137 family, while the CPL+ ordering code identifies the 40-pin PDIP package configuration. Typical applications include digital panel meters, laboratory measurement equipment, weighing systems, temperature-measurement instruments, battery-powered meters, and industrial process displays. Because the device directly drives an LED display, the power budget depends on both the converter's low supply current and the current drawn by the selected LED digits and segments. Display visibility, digit count, update behavior, and the required input measurement range should therefore be verified against the manufacturer datasheet before final schematic approval. For PCB layout, place the ICL7137CPL+ in a through-hole footprint matching the 40-pin PDIP package and observe the manufacturer's input, reference, clock, and display-output guidance. Keep sensitive analog input and reference nodes away from display return-current paths where possible. Because the verified data does not publish a complete pin-by-pin mapping, the pinout should be confirmed from the official datasheet before assembly. This page combines verified manufacturer and distributor information, package details, replacement guidance, and practical selection context rather than inferring unconfirmed electrical values.

Angebot Kontakt
ICL7137CQH - Low-Power 3.5-Digit ADC | Maxim Integrated
ICL7137CQH

ICL7137CQH - Low-Power 3.5-Digit ADC | Maxim Integrated

The Maxim Integrated ICL7137CQH is a low-power, 3.5-digit dual-slope analog-to-digital converter with a direct LCD driver in a 44-pin QFP package. It operates in the commercial 0°C to 70°C temperature range, has 44 J-bend terminals, and is identified by package code QCCJ. The listed input-voltage range is 2.6 V to 3.2 V. An ADC is an integrated circuit that converts an analog voltage into a numeric value. The dual-slope technique used by the ICL7137CQH integrates the unknown input over a fixed interval and compares it with a reference ramp. A digital counter then measures the integration time required to reach balance. This method is suited to panel meters, laboratory instruments, digital scales, and other systems where stable readings and direct display-driver integration are more important than very high conversion speed. The ICL7137CQH combines low-power operation with 3.5-digit measurement resolution and direct LCD drive capability. Its 44-pin package provides separate connections for analog measurement inputs, reference circuitry, timing, digital data, and display outputs. The commercial temperature range supports equipment intended for controlled indoor or industrial environments rather than extended automotive, military, or extreme-temperature operation. The 44-pin QFP package provides adequate connection density for analog, digital, and display functions while supporting surface-mount assembly. The MS-022AB package designation and J-bend terminal form identify a leaded quad flat package. Designers must preserve the package footprint, pin assignment, analog trace geometry, bypass-capacitor placement, and reference-source arrangement when revising a circuit around this converter. Typical uses include digital panel meters, precision weighing indicators, temperature-display instruments, laboratory measurement equipment, and process-monitoring panels. Direct LCD drive is particularly useful when the converter's digital outputs can operate a display without an additional display-controller IC. In each case, the design must account for reference accuracy, input integration timing, display update rate, and the electrical limits of the connected LCD. A critical layout consideration is the analog input and reference network. Keep these connections short, place the associated bypass capacitors close to their supply pins, and route digital and display signals away from sensitive analog nodes. Verify timing and conversion behavior with the intended source impedance because the dual-slope measurement integrates current rather than sampling an instantaneous voltage. This product page organizes the verified electrical, environmental, mechanical, and commercial attributes of the ICL7137CQH. It also identifies same-brand alternatives in the related cross-reference results and adds application, comparison, and design guidance to help engineers evaluate a replacement without overlooking display-driver or measurement-system differences.

Angebot Kontakt
ICL7149CPL - 3¾-Digit Autoranging Multimeter IC | Renesas
ICL7149CPL

ICL7149CPL - 3¾-Digit Autoranging Multimeter IC | Renesas

Renesas Electronics ICL7149CPL is a low-power, autoranging 3¾-digit digital-multimeter IC that converts analog input voltage into a BCD measurement result for direct display processing. It is supplied in a 40-pin plastic dual in-line package. The ICL7149 uses successive-approximation conversion and integrates the analog-to-digital conversion function, auto-ranging control, and counter functions needed to implement the measurement front end of a digital multimeter. A digital-multimeter IC is a specialized data-conversion and measurement-control component that sits between the physical input network and the display or processing system. Its wider functional hierarchy is analog-to-digital converter, integrated circuit, and semiconductor. Unlike a general-purpose ADC intended only for sampled waveforms, the ICL7149 is designed around the repetitive measurement behavior of a handheld meter. According to the manufacturer datasheet, the ICL7139 and ICL7149 always display the result of a conversion on the correct range. The principal feature of the ICL7149 is automatic range selection, which simplifies the front-panel design by reducing the number of manual range-switch controls. Its 3¾-digit measurement format provides a resolution suitable for common laboratory, service, industrial, and educational instruments. The low-power architecture also targets portable equipment where the display, reference circuitry, switches, and measurement amplifier must operate efficiently from a limited power budget. ICL7149CPL integrates a successive-approximation ADC with a ratiometric measurement architecture. External resistors, capacitors, reference voltage, input conditioning, and display-driver circuitry complete the instrument. Its BCD output supports conventional seven-segment display decoding, while control logic coordinates autoranging, digit strobes, and the measurement sequence. Designers should consult the manufacturer pin-description and application tables before assigning tracks because the exact functions, test points, and supply requirements are assigned by pin number. Typical applications include handheld and bench-top digital multimeters, panel meters, laboratory measurement instruments, educational test equipment, and embedded diagnostic instruments. In each case, the ICL7149 handles repetitive conversion and range selection while an external analog front end defines the measurable voltage, current, and resistance ranges. The display system then receives the converted result for numeric presentation. The principal design consideration is preserving the ratiometric relationship between the reference and measured signal. Reference bypass, analog input settling, timing, and display-driver implementation materially affect accuracy and repeatability. Layout should separate sensitive analog nodes from display and control transitions, while the power supply must provide a stable operating environment for both the converter and its external components. This product record combines the manufacturer datasheet with distributor package and availability information, then adds application guidance, design checks, and sourcing questions for engineers evaluating this legacy autoranging meter IC in a new or repair design.

Angebot Kontakt
ICL7182CPL - 40-Pin DIP Integrated Circuit | Rochester
ICL7182CPL

ICL7182CPL - 40-Pin DIP Integrated Circuit | Rochester

The Rochester Electronics ICL7182CPL is a 40-pin DIP integrated circuit associated with high-performance analog-to-digital conversion and interface-controller applications. Its identifying order code combines the ICL7182 device designation with the CPL package suffix, and catalog information identifies the physical format as DIP-40. The component is offered as an integrated circuit through multiple authorized channels, indicating continued availability for legacy and industrial designs. Its principal engineering value is support for established hardware rather than integration into the newest mixed-signal systems. An analog-to-digital converter, or ADC, is a semiconductor that converts an analog voltage into a digital code for processing, measurement, or control. In an instrumentation system, an ADC may follow an analog sensor and signal-conditioning stage. In an industrial control system, it can digitize a control or monitoring signal before a processor evaluates it. The ICL7182CPL is positioned within this broad ADC and interface-controller product category, while its exact conversion architecture, resolution, timing, and input ranges require confirmation from the manufacturer documentation. The verified product identity establishes the MPN, Rochester Electronics source, 40-pin DIP package, and classification among integrated circuits. Specific operating voltage, conversion resolution, sampling rate, input count, reference configuration, digital interface, and temperature range are not stated in the available catalog records. Engineers should therefore treat those electrical values as qualification items rather than assume ratings from similarly named devices. Confirm them in the original ICL7182 datasheet before schematic release, firmware development, or production procurement. Because this is a legacy through-hole device, PCB implementation differs from modern surface-mount converter designs. The DIP-40 footprint uses plated through-hole rows with a 0.1-inch pin pitch and a 600 mil row spacing. It can be assembled into older industrial, measurement, and control boards, although it occupies substantially more board area than a compact mixed-signal package. RoHS and REACH status, qualification grades, thermal ratings, and electrical limits should also be confirmed for the exact ordered configuration. Typical uses for this device family include digitized process measurement, laboratory instrumentation, industrial data acquisition, and legacy control interfaces. In each case, the designer must preserve the original converter's clocking, reference, input-conditioning, and digital-bus arrangements. A substitute evaluation must compare not only the package and pin assignments but also conversion timing, input impedance, reference requirements, data format, and control signals. These characteristics determine whether a board can operate without hardware or firmware changes. For legacy product maintenance, the safest design method is to treat the original circuit and firmware as the reference. Verify supply rails and signal levels against the exact datasheet, preserve decoupling and reference layout, and test conversion accuracy across the intended temperature range. When procuring a replacement, request the manufacturer datasheet and confirm the package marking, revision status, and pinout rather than relying solely on a catalog classification. This page consolidates the verified part identity, package information, sourcing context, replacement constraints, and practical legacy-design guidance. It also distinguishes confirmed attributes from parameters that still require document-level verification, helping engineers plan a controlled repair, redesign, or second-source decision without overstating the capabilities of the ICL7182CPL.

Angebot Kontakt
ICL7652P - 5 uV Zero-Drift Op Amp | Texas Instruments
ICL7652P

ICL7652P - 5 uV Zero-Drift Op Amp | Texas Instruments

The Texas Instruments ICL7652P is a single-circuit, precision chopper-stabilized operational amplifier with 5 uV offset, zero-drift operation, and a 1.9 MHz gain-bandwidth product. It is supplied in an 8-pin PDIP package. The device is designed for instrumentation and other applications requiring low input offset voltage, low bias current, and low drift over temperature or time. An operational amplifier is an analog signal-processing component that uses negative feedback to control gain, filtering, buffering, or amplification of a voltage signal. The ICL7652 belongs to the precision op-amp hierarchy: operational amplifier, instrumentation amplifier element, analog IC, and semiconductor. Its chopper-stabilized architecture is intended to reduce offset-related error in dc and low-frequency measurements. The verified manufacturer description identifies the ICL7652 as a high-precision, 5-uV-offset chopper-stabilized operational amplifier. The distributor listing specifies one amplifier circuit in an 8-PDIP package, while a separate component listing identifies 1.9 MHz as the associated frequency parameter. The supplied source material does not provide complete electrical tables for supply voltage, input bias current, output swing, noise, common-mode range, or temperature limits, so those specifications are not inferred here. ICL7652P is suitable for precision sensor interfaces, low-level signal conditioning, bridge amplification, current measurement, laboratory instrumentation, and industrial measurement systems when the circuit requires low offset and low drift. The 8-pin PDIP package is mechanically straightforward for through-hole assembly and prototyping. Its precision behavior should be evaluated against the complete manufacturer datasheet before production release. A key design consideration is to verify the required supply rails, input common-mode range, output swing, noise performance, and external compensation or filtering requirements on the authoritative ICL7652 datasheet. The verified distributor search result does not provide those values, so applications should be selected only after checking the electrical characteristics and pin configuration for the exact ICL7652P ordering code. This page combines the verified Texas Instruments product description, distributor identification, package information, available commercial sources, and application-oriented design guidance without inventing missing specifications. It is intended to help engineers identify the correct precision chopper-stabilized amplifier candidate for instrumentation and low-level analog designs.

Angebot Kontakt
ICM7228BIPIZ - 8-Digit LED Display Driver, 28-PDIP | Renesas
ICM7228BIPIZ

ICM7228BIPIZ - 8-Digit LED Display Driver, 28-PDIP | Renesas

The Renesas ICM7228BIPIZ is an 8-digit, 7-segment, microprocessor-compatible LED display decoder driver housed in a 28-pin PDIP package. It integrates two types of 7-segment decoders (Code B and Code B without DP), multiplex scan circuitry, segment and digit drivers, and an 8-byte static display memory into a single chip. The device operates from a single 4V to 6V supply and drives common-cathode LED displays directly through on-chip digit drivers rated for typical LED segment currents. What is an LED display decoder driver? An LED display decoder driver is an interface IC that bridges a microprocessor or digital logic to a multiplexed 7-segment LED display. It accepts parallel or serial numeric data, decodes it into 7-segment patterns using internal lookup tables, and generates the time-multiplexed drive signals that sequentially energize each digit position. By replacing dozens of discrete logic gates, BCD-to-7-segment decoders, and discrete transistors, these parts dramatically reduce PCB area, BOM count, and design complexity for numeric readouts. The ICM7228 family sits within the broader Display Driver category of power management/interface ICs. Key features of the ICM7228BIPIZ include direct microprocessor bus interfacing with no external components required for static display memory, on-chip multiplex scan oscillator, sixteen segment drivers, and eight digit drivers. The "B" suffix indicates a non-latching, Code B/HEX decoder with a built-in 8-character RAM, allowing random access to any digit via address lines. The ICM7228A variant differs only by its single-digit access mode and pin mapping; the ICM7228B is designed to be a drop-in upgrade for Intersil ICM7218 designs. Typical applications include panel meters, test equipment readouts, instrumentation front panels, hand-held instruments, and bargraph displays. Designers choose the ICM7228BIPIZ when they need a robust, time-proven display driver with a well-documented interface and no firmware-driven multiplexing burden. When planning the PCB layout, ensure the digit driver outputs connect to common-cathode digit commons with appropriate current-setting resistors in series with each segment, and place the device close to the display to minimize EMI and trace resistance.

Angebot Kontakt
ICS1523M - 250MHz Video Clock Synthesizer | Renesas | SOIC-24
ICS1523M

ICS1523M - 250MHz Video Clock Synthesizer | Renesas | SOIC-24

Renesas Electronics ICS1523M is a 250 MHz clock synthesizer and frequency generator designed for general-purpose phase-controlled clock synthesis, line-locked and genlocked high-resolution video systems, and video projection equipment. The device is supplied in a 24-pin SOIC package measuring 0.295 inch, or 7.50 mm, in width. Its architecture uses advanced low-voltage CMOS mixed-mode technology to combine programmable frequency generation with phase-controlled operation. A clock synthesizer, also called a clock generator or phase-locked-loop-based timing device, produces one or more timing signals whose frequency and phase are controlled relative to an external reference. In a phase-locked system, the internal output remains synchronized to the reference while the feedback network determines the desired relationship. This category belongs to the Clock & Timing hierarchy, which includes clock generators, frequency synthesizers, phase-locked loops, clock buffers, and timing controllers used to coordinate digital and video systems. The principal documented feature of the ICS1523M is its 250 MHz operating frequency. Its phase-controlled frequency-generation capability makes it suitable where a system requires adjustable or externally synchronized clocks rather than a fixed-frequency oscillator. The manufacturer describes the ICS1523 family as a low-cost, high-performance solution for general-purpose clock synthesis, line-locked and genlocked high-resolution video applications, and projectors. The mixed-signal nature of the design is important in video timing systems. A reference signal establishes the synchronization point, while phase control permits the generated clock to be adjusted relative to that reference. This supports timing alignment across multiple video-processing stages and reduces reliance on multiple independent free-running clocks. Exact voltage, current, jitter, temperature, and programming-interface details were not included in the supplied source data and must be confirmed in the manufacturer datasheet before design release. ICS1523M applications include professional video timing systems, video projectors, line-locked display equipment, genlocked production systems, and general-purpose phase-controlled clock modules. In these systems, the ICS1523M can provide a coordinated timing reference for converters, processors, memory interfaces, or other circuitry requiring a stable phase-related clock. A key implementation consideration is to preserve the manufacturer's recommended reference, feedback, decoupling, and output-routing topology. Incorrect feedback connections or an unsuitable reference source can prevent phase lock or impair jitter performance. Because the verified source material does not expose complete pin assignments or electrical tables, engineers should use the official datasheet for pin connectivity, loop-filter selection, operating limits, and layout requirements. This product summary combines the verified 250 MHz, 24-SOIC package, application positioning, pricing availability, and replacement analysis with practical design guidance. It also distinguishes documented facts from parameters that still require datasheet confirmation, helping engineers evaluate the ICS1523M without treating unspecified values as guaranteed specifications.

Angebot Kontakt