Integrierte Schaltungen

MKE04Z8VWJ4

MKE04Z8VWJ4 - Cortex-M0+ 48MHz MCU, 8KB Flash, 20-SOIC | NXP

The NXP MKE04Z8VWJ4 is a 32-bit ARM Cortex-M0+ microcontroller from the Kinetis KE04 sub-family, running up to 48 MHz with 8 KB of Flash and 1 KB of SRAM in a 20-pin wide-body SOIC (WB SOIC) package. The part targets cost-sensitive, high-reliability industrial and appliance applications operating in electrically noisy environments, providing enhanced ESD/EMC performance that simplifies compliance with industrial EMI/ESD standards. A microcontroller (MCU) is an integrated circuit that combines a processor core, program memory (Flash), data memory (SRAM), and a rich set of on-chip peripherals (timers, ADC, communication interfaces, GPIO) on a single die. The Cortex-M0+ architecture, as implemented in the KE04, sits in the ARM Cortex-M hierarchy above Cortex-M0 and below Cortex-M3/M4 in performance and feature set, offering Thumb-2 instruction set compatibility, deterministic interrupt latency, and ultra-low power sleep modes. The Kinetis KE04 sub-family further positions the MKE04Z8VWJ4 within the broader NXP Kinetis E series for 5V-tolerant, robust MCU designs. Key features of the MKE04Z8VWJ4 include an integrated analog block with a 12-bit ADC and analog comparator, multiple timer modules (FTM, TPM, LPTMR), communication peripherals including UART, SPI, and I2C, an internal LDO regulator for stable core supply, and a wide operating voltage range supporting both 3.3V and 5V rails. The device's 5V-tolerant GPIO and enhanced ESD/EMC immunity reduce external protection component cost. The Kinetis KE04 architecture uses a 2-stage pipeline Cortex-M0+ core with single-cycle I/O access, enabling deterministic 48 MHz operation at low power. The on-chip Flash controller supports byte-addressable programming and EEPROM-like data storage emulation in the main Flash array. Hardware CRC and a watchdog timer (WDOG) provide functional safety hooks for industrial control loops. Typical applications include household appliances (white goods, motor control front-ends), industrial sensor conditioning, smart metering edge nodes, automotive body electronics (non-safety), and low-cost human-machine interface (HMI) controllers. The wide SOIC package also supports hand-soldering and rework in prototype runs. When designing with this device, ensure that the supply decoupling network uses a 100 nF ceramic capacitor close to each VDD pin and a bulk 4.7 uF capacitor on the main rail. Verify that your code execution timing budget fits within 48 MHz cycles, and confirm that your chosen in-circuit debugger is CMSIS-DAP compatible. This page synthesizes distributor pricing, drop-in Kinetis family alternatives, application guidance, and parametric comparisons beyond the manufacturer datasheet excerpt, helping engineers select and source the MKE04Z8VWJ4 with confidence.

Angebot Kontakt

MKE14F512VLL16

MKE14F512VLL16 - Kinetis KE14F 168MHz Cortex-M4F 512KB | NXP

The NXP MKE14F512VLL16 is a Kinetis KE14F microcontroller featuring an ARM Cortex-M4F core running up to 168 MHz with 512 KB of Flash and 64 KB SRAM in a 100-pin LQFP package. It targets 5V-tolerant, robust industrial applications that require deterministic real-time control with rich communication peripherals. A microcontroller (MCU) is a single-chip computer containing a CPU core, Flash program memory, SRAM, and a rich set of on-chip peripherals such as timers, ADCs, communication interfaces (UART, SPI, I2C, CAN), and GPIOs. Within the broader semiconductor taxonomy, MCUs belong to integrated circuits > microcontrollers, sitting between simple 8-bit controllers and full applications processors, and form the core of virtually every embedded system. Key features of the MKE14F512VLL16 include an ARM Cortex-M4F core with single-precision FPU and DSP extensions, 512 KB of on-chip Flash plus 64 KB FlexMemory for EEPROM emulation, 64 KB SRAM, and a high-accuracy 8-channel analog-to-digital converter supporting 12-bit resolution. The device also integrates CAN 2.0B (FlexCAN), multiple UART/SPI/I2C interfaces, a low-power run, wait, and stop modes with multiple wake-up sources, and operates across an extended industrial temperature range from -40C to +105C. The 5V-tolerant I/O enables direct interfacing with legacy industrial sensors and actuators without level shifters. Architecturally, the KE14F combines an efficient Cortex-M4F core with a tightly-coupled peripheral set including a flexible low-power timer subsystem, a motor-control-grade PWM module, and a robust ESD/EMC protection scheme. The integrated FlexCAN module is specifically hardened for industrial CAN networks, and the dual-watchdog architecture with an independent clock source enhances functional safety for safety-critical systems. Typical applications include industrial motor control (BLDC, PMSM, and stepper drives), CAN-enabled building automation nodes, factory automation PLCs and remote I/O, smart energy meters, lighting control systems, and HVAC controllers. The 5V-tolerant GPIO simplifies interfacing with industrial sensors that operate at 5V logic levels. When designing with this device, the engineer must respect the supply decoupling guidelines, route the high-speed analog reference (VREFH) with low-noise traces, and ensure the JTAG/SWD trace length is matched for reliable in-circuit programming. Compared with Kinetis E lower-tier variants, the KE14F adds an FPU and larger memory, making it the preferred choice when floating-point DSP workloads and code density matter. This page synthesizes distributor pricing, drop-in alternatives sourced from NXP's Kinetis KE1xF family, and practical design notes not found in the manufacturer datasheet alone.

Angebot Kontakt

MKE14F512VLL16557

MKE14F512VLL16557 - 168MHz Cortex-M4F 512KB MCU | NXP

The NXP MKE14F512VLL16557 is an ARM Cortex-M4F microcontroller from the Kinetis KE1xF family, featuring a 32-bit core running up to 168 MHz with single-precision FPU and DSP instructions, 512 KB of Flash, and packaged in a 100-pin LQFP (14x14 mm). It targets cost-sensitive industrial and automotive-grade embedded applications where deterministic performance, large memory, and a rich peripheral set are required. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash and RAM), and a wide range of peripherals such as timers, ADC/DAC, communication interfaces, and GPIOs into a single IC. Within the broader semiconductor taxonomy, the MKE14F512VLL16557 sits under microcontroller -> embedded processor -> integrated circuit -> semiconductor, and within NXP's portfolio under Kinetis E series -> ARM Cortex-M4 based MCU. The Cortex-M4F architecture adds IEEE 754 single-precision floating-point and DSP extensions, enabling efficient execution of control-loop algorithms, signal processing, and motor-control math. Key features of this part include 512 KB program Flash, 64 KB SRAM (typical KE1xF configuration), a 12-bit ADC with up to 1 MSPS conversion rate, multiple FlexTimer modules, up to four UART modules, two SPI and two I2C ports, and a CAN 2.0B interface. The device supports operating voltages from 2.7V to 5.5V and an industrial temperature range of -40C to +105C. Technically, the KE1xF family is built on a 90 nm flash process and uses an ARM Cortex-M4F core with a 3-stage pipeline. The 168 MHz core mark delivers 1.25 DMIPS/MHz, sufficient for closed-loop motor control and real-time industrial protocols. The integrated FPU eliminates the need for an external math coprocessor, while DSP instructions accelerate FFT and FIR filter operations used in sensor conditioning. Typical applications include industrial motor control (BLDC/PMSM), building automation, smart metering, HVAC control, point-of-sale terminals, and human-machine interface (HMI) panels. The large 512 KB Flash and broad peripheral mix make it well-suited for protocol stacks such as Modbus, CANopen, and PROFINET that demand both memory and real-time determinism. When designing with the MKE14F512VLL16557, ensure decoupling capacitors are placed close to the multiple VDD/VSS pin pairs of the 100-LQFP package and that the analog supply (VDDA) is filtered separately to achieve the ADC's specified SNR. The NXP Kinetis SDK and Processor Expert configuration tools provide pin-muxing and peripheral initialization code, significantly reducing firmware bring-up time. This page synthesizes distributor pricing (as of 2026-10-19), same-family drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet.

Angebot Kontakt

MKE15Z128VLH7557

MKE15Z128VLH7557 - 128KB Flash Cortex-M0+ 72MHz MCU | NXP

The NXP MKE15Z128VLH7557 is a 32-bit ARM Cortex-M0+ microcontroller from the Kinetis KE1xZ family, featuring 128 KB of flash memory, a 72 MHz CPU core, and an integrated 64-pin LQFP (10x10 mm) package optimized for automotive and industrial control applications. As a member of the KE15Z sub-family, it targets cost-sensitive embedded designs that require a balance of low power consumption, robust peripherals, and automotive-grade reliability. What is a Cortex-M0+ microcontroller? An ARM Cortex-M0+ microcontroller is a 32-bit reduced instruction set computing (RISC) processor core designed by ARM Holdings for ultra-low-power embedded applications. The Cortex-M0+ architecture sits within the broader ARM Cortex-M family (M0, M0+, M3, M4, M7, M33) and provides a bridge between 8/16-bit legacy microcontrollers and higher-performance Cortex-M3/M4 cores. It belongs to the larger taxonomy of microcontrollers (MCU) -> embedded processors -> semiconductors, and it is widely used in automotive body electronics, industrial sensor nodes, and consumer devices where deterministic real-time performance and low active/standby power are critical. Key features of the MKE15Z128VLH7557 include 128 KB of on-chip flash for program storage, up to 72 MHz core frequency with a single-cycle 32-bit x 32-bit multiplier for efficient signal processing, and a comprehensive set of on-chip peripherals. The device integrates multiple low-power modes (Wait, Stop, VLPR, VLPS), hardware CRC, and a flexible interrupt controller to support deterministic real-time operation. The 64-pin LQFP (10x10 mm) package offers ample I/O count for mixed-signal designs while remaining compatible with standard SMT assembly lines. Architecturally, the KE15Z leverages a Cortex-M0+ core with a single AHB-Lite bus matrix connecting flash, SRAM, and peripherals. The 72 MHz operating frequency enables execution of 90 DMIPS (1.25 DMIPS/MHz), and the integrated memory protection unit and bit-banding aliasing provide deterministic memory access for safety-critical applications. An on-chip voltage regulator supports a wide operating voltage range, and the analog mix includes multiple 12-bit ADCs with configurable resolution and sample rates suitable for sensor interface circuits. Typical applications include automotive body controllers, HVAC control modules, seat adjustment ECUs, industrial sensor hubs, low-end motor control, and battery-powered IoT edge nodes. The combination of automotive-grade qualification, robust peripherals, and low-power operation makes it well-suited to designs that must pass stringent automotive EMC and ESD requirements. When designing with the MKE15Z128VLH7557, verify the latest Kinetis KE1xZ reference manual for the complete peripheral pin-out and clock-tree configuration. The 64-pin LQFP package requires a 10x10 mm PCB footprint with 0.5 mm pitch; verify pin 1 orientation against the package marking to avoid reverse-mount failures during production. This page synthesizes distributor pricing, drop-in alternatives within the same LQFP-64 footprint, and practical design considerations not consolidated in the manufacturer datasheet, enabling faster component selection and qualification for automotive and industrial projects.

Angebot Kontakt

MKE15Z256VLH7

MKE15Z256VLH7 - 72MHz Cortex-M0+ MCU 256KB Flash | NXP

The NXP Semiconductors MKE15Z256VLH7 is a 32-bit ARM Cortex-M0+ microcontroller from the Kinetis KE1xZ family, operating up to 72 MHz with 256 KB of Flash and 32 KB of SRAM, housed in a 64-pin LQFP (10x10 mm) package. It supports a wide 3.3 V to 5.5 V supply range, making it well suited for both 3.3 V and 5 V industrial and consumer designs. The device integrates an ARM Cortex-M0+ core delivering 0.93 DMIPS/MHz, with peripheral IP optimized for mixed-voltage signal-chain applications. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory (Flash), working memory (RAM), and integrated peripherals such as timers, ADCs, and communication interfaces. Within the broader semiconductor taxonomy, the MKE15Z256VLH7 sits under: microcontroller -> 32-bit MCU -> ARM Cortex-M0+ MCU -> low-power main-stream MCU -> embedded system-on-chip. Kinetis KE1xZ devices target cost-sensitive industrial and consumer applications where Cortex-M0+ efficiency, low power, and 5 V tolerance are simultaneously required. Key features of the MKE15Z256VLH7 include a 12-bit SAR ADC with up to 16 channels, multiple high-resolution FlexTimers, an integrated touch-sensing interface (TSI), and a flexible serial communication set including UART, SPI, and I2C. The on-chip 32 KB FlexMemory supports EEPROM emulation and customer-configurable data-flash partitioning. The 64-pin LQFP package exposes a rich peripheral set while maintaining a compact 10x10 mm footprint suitable for hand-soldered prototypes and high-volume reflow assembly. Architecturally, the KE1xZ family combines an ARM Cortex-M0+ core with a low-power platform featuring multiple run, wait, and stop modes. The 5 V-tolerant I/O ring enables direct interface to legacy 5 V analog and digital signals without level shifters. Hardware CRC, a random-number generator, and flash access control provide basic security features. The integrated TSI module supports robust proximity and touch-button interfaces without external components. Typical applications include industrial control and HMI, home appliances with user interfaces, low-end motor control, smart lighting, IoT edge nodes, and battery-powered sensors. The wide 3.3 V to 5.5 V supply range and integrated touch sensing make it especially attractive for appliance front panels, climate-control thermostats, and white-goods control boards. When designing with this part, place 0.1 µF decoupling capacitors close to each VDD pin and follow the reference manual's analog and digital grounding recommendations to maximize ADC performance. Use NXP's MCUXpresso IDE and the Kinetis KE1xZ SDK for software development, and consider the MKE15Z256VLL7 LQFP-100 sibling if additional GPIO is needed. This page synthesizes distributor pricing, drop-in alternative MPNs from the same Kinetis KE1xZ family, application notes, and design considerations not consolidated in the manufacturer datasheet, giving engineers a faster engineering and sourcing reference.

Angebot Kontakt

MKE15Z256VLH7557

MKE15Z256VLH7557 - 72MHz Cortex-M0+ 256KB MCU | NXP

The NXP Semiconductors MKE15Z256VLH7557 is a 32-bit Arm Cortex-M0+ microcontroller in the Kinetis KE1xZ family, running at up to 72 MHz with 256 KB flash, 32 KB RAM, and a 64-pin LQFP (10x10 mm) surface-mount package. The device operates from a 2.7 V to 5.5 V supply and provides 58 general-purpose I/O lines with DMA support. A microcontroller (MCU) is a single integrated circuit that combines a processor core, nonvolatile program memory, SRAM, and a rich set of peripherals on one die, sitting at the heart of the embedded-system hierarchy: MCU -> embedded processor -> system-on-chip -> semiconductor device. The Kinetis KE1xZ series targets cost-sensitive applications that need more flash and peripheral integration than 8-bit MCUs while keeping the ultra-low power and simple programming model of the Cortex-M0+ core. Key features include the 72 MHz Arm Cortex-M0+ core with single-cycle I/O access, 256 KB of on-chip flash program memory, 32 KB of SRAM, and 2 KB of FlexRAM that can be used for EEPROM emulation, eliminating the need for an external EEPROM in many designs. Peripherals include ADC channels, PWM (FTM) timers, UART, SPI, and I2C serial interfaces, plus a broad set of security features described on the NXP product page. Technically, the KE1xZ family pairs the low-gate-count Cortex-M0+ pipeline with a crossbar bus fabric and DMA, allowing peripherals to move data without CPU intervention. The 5 V-tolerant supply range of 2.7 V to 5.5 V lets the MCU connect directly to industrial 5 V logic, reducing level-shifting circuitry and bill-of-material cost compared with 3.3 V-only Cortex-M parts. Typical applications include industrial control and factory automation nodes, home-appliance and motor-control boards using the PWM and ADC peripherals, consumer electronics with human-machine interfaces, and 5 V legacy system upgrades replacing aging 8-bit MCUs. When designing with this device, verify the temperature-grade and packaging suffix in the ordering code (the 7557 suffix indicates the tray packaging option) and confirm that the FlexRAM EEPROM-emulation allocation matches your data-retention requirements per the NXP datasheet. This page synthesizes distributor pricing from LCSC, DigiKey, and Octopart, drop-in same-family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

Angebot Kontakt

MKE15Z256VLL7557

MKE15Z256VLL7557 - 72MHz Cortex-M0+ MCU 256KB Flash LQFP-100 | NXP

The NXP MKE15Z256VLL7557 is a 32-bit ARM Cortex-M0+ microcontroller from the Kinetis KE1xZ family, integrating 256 KB of flash memory, 72 MHz CPU performance, and a 100-pin LQFP (14x14 mm) package. This Freescale-derived part supports 2.7V to 5.5V supply operation and is engineered for cost-sensitive industrial, motor control, and automotive body applications that require reliable 32-bit processing without the power envelope of higher-end Cortex-M4 devices. An ARM Cortex-M0+ microcontroller is a 32-bit reduced instruction set computing (RISC) core based on the ARMv6-M architecture, optimized for energy-efficient embedded designs. Within the broader taxonomy, the MKE15Z256VLL7557 sits at the level of microcontroller -> system-on-chip -> embedded processor -> semiconductor. The M0+ core delivers 0.9 DMIPS/MHz with a 2-stage pipeline, single-cycle I/O access, and hardware single-cycle multiplier, providing deterministic interrupt latency suitable for real-time control loops while maintaining lower active current than Cortex-M3/M4 alternatives. Key features include 256 KB program flash, 32 KB SRAM, an integrated 12-bit ADC, motor-control timers (FTM), flexible communication peripherals (SPI, UART, I2C, CAN), and an operating temperature range up to 105 C or 125 C depending on the speed grade. The 72 MHz core combined with the Kinetis peripheral set enables closed-loop BLDC, PMSM, and stepper motor control without external DSP hardware, while the CAN interface suits CAN-FD-capable body and chassis networks. Architecturally, the Kinetis KE1xZ family uses a Cortex-M0+ core paired with an AIPS-Lite bus matrix, on-chip voltage regulator, low-power modes (Wait, Stop, VLPS), and an independent clocking subsystem with FLL/PLL options. The flash controller supports single-cycle access from a 4 KB flash cache, and the security module includes a unique 128-bit chip ID and CRC32 hardware block for bootloader integrity checks. Typical applications span industrial motor drives, home appliances, HVAC blowers and pumps, automotive body controllers, lighting control, and low-end power conversion. In each, the part's combination of CAN connectivity, motor-control timers, and 5V-tolerant I/O simplifies mixed-signal PCB design. Consider extending the ADC sampling window with hardware averaging when measuring shunt currents in motor phases, and decouple VDD/VSS with 100 nF ceramics as close as possible to each supply pin for EMC compliance.

Angebot Kontakt

MKE18F512VLL16557

MKE18F512VLL16557 - 512KB Flash Cortex-M4F MCU | NXP

The NXP MKE18F512VLL16557 is a Kinetis KE1xF family 32-bit ARM Cortex-M4F microcontroller with 512 KB of Flash, 168 MHz CPU clock, and a 100-pin LQFP (14x14 mm) industrial-grade operating range. It integrates a single-core Cortex-M4F core with FPU, DSP instructions, 64 KB SRAM, and the Kinetis peripheral set for mixed-signal embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data memory, and peripheral interfaces on a single silicon die. Within the embedded electronics taxonomy, this Kinetis KE1xF MCU sits at the intersection of microcontroller -> 32-bit MCU -> ARM Cortex-M family -> automotive/industrial-grade MCU, providing deterministic real-time control with DSP capability. Key features include up to 168 MHz Cortex-M4F core with single-precision FPU, 512 KB on-chip Flash with ECC, 64 KB SRAM, 12-bit ADC with up to 16 channels, multiple FlexTimer/PWM modules, CAN-FD, I2C, SPI, UART peripherals, low-power run/wait/stop modes, and a wide operating voltage range of 2.7V to 5.5V. The device is qualified for industrial temperature -40C to +105C. The Kinetis KE1xF architecture uses a Cortex-M4F core with tightly-coupled SRAM and a multi-layer AIPS-Lite bus matrix, delivering deterministic interrupt latency below 30 cycles. The integrated power-management IC supplies core, I/O, and ADC reference rails with separate trim. The 100-pin LQFP package exposes the full peripheral set, including FlexIO and high-resolution timer channels, while exposing an industrial -40C to +105C temperature range for harsh-environment designs. Typical applications include industrial motor control, building automation, automotive body and chassis ECUs, smart sensor hubs, and low-cost CAN-FD nodes. The wide voltage range and built-in CAN-FD make the MKE18F512VLL16557 a strong fit for distributed control networks and 24V industrial buses. When designing with this MCU, ensure your linker script reserves the proper FlexNVM region for EEPROM emulation, and that the ADC reference pin decoupling follows the NXP application note layout. The 168 MHz CPU requires a wait-state configuration in the Flash controller for operation above 100 MHz. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet. All data sources are listed for verification.

Angebot Kontakt

MKL02Z16VFG4

MKL02Z16VFG4 - 48MHz Cortex-M0+ 16KB Flash MCU | NXP

The NXP Semiconductors MKL02Z16VFG4 is a Kinetis KL02 series 32-bit microcontroller based on the Arm Cortex-M0+ core running at up to 48 MHz, with 16 KB flash memory, 2 KB SRAM, and a 16-pin QFN (3x3 mm) package with exposed pad. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory (flash for code storage and SRAM for data), and peripherals such as timers, communication interfaces (UART, SPI, I2C), and analog-to-digital converters on one die. Within the power management hierarchy of embedded systems, MCUs occupy the application layer above sensor interfaces and below wireless SoCs. The Kinetis KL0x family is the entry point into the Kinetis L series and serves as a migration bridge for 8-bit MCU customers moving to 32-bit Arm Cortex-M0+ architectures. Key features of the MKL02Z16VFG4 include ultra-low-power operation optimized for battery-powered devices, a 48 MHz maximum core clock, 16 KB of on-chip flash program memory, 2 KB of SRAM, operation at a 3.3 V supply, and a compact 16-QFN footprint with exposed pad for improved thermal and ground performance. According to Arm Keil device documentation, the KL02 chip-scale-class package consumes 25 percent less PCB area and delivers 60 percent more GPIO than the nearest competitor device, making it one of the smallest Arm-powered microcontrollers available. Technically, the Cortex-M0+ core offers a two-stage pipeline and low gate count, achieving excellent energy efficiency in the uA/MHz range. The device is software and tool compatible with all other Kinetis L series devices, allowing a scalable migration path to larger flash densities (for example, MKL02Z32VFG4 with 32 KB flash in the same 16-QFN package) without board redesign. Typical applications include remote sensing nodes, portable consumer devices, ingestible healthcare sensing, small appliances, touch sensing, and simple motor control where low cost, small size, and low quiescent power are more important than raw processing throughput. Design consideration: because the flash density is only 16 KB, developers must use the Kinetis SDK with size-optimized (-Os) compilation; code growth beyond 16 KB requires pin-compatible migration to the MKL02Z32VFG4. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt

MKL02Z32VFM4R

MKL02Z32VFM4R - 48MHz Cortex-M0+ MCU, 32KB Flash | NXP

The NXP Semiconductors MKL02Z32VFM4R is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller from the Kinetis KL02 family, delivering 48 MHz core performance with 32 KB of embedded Flash and 4 KB of RAM in a compact 32-pin HVQFN (5x5 mm) package with exposed thermal pad. It targets cost-sensitive, battery-powered applications where board area and energy budget are critical design constraints. Tape-and-reel packaging (suffix "R") supports high-volume SMT production. An ARM Cortex-M0+ microcontroller (MCU) is a 32-bit reduced instruction set computing (RISC) processor core that combines Thumb-2 instruction set efficiency with an ultra-low gate count, making it the lowest-power and smallest-footprint member of the ARM Cortex-M family. Kinetis microcontrollers integrate the Cortex-M0+ core with on-chip memory, analog peripherals, and low-power peripherals, forming a complete system-on-chip (SoC) within the broader microcontroller and embedded system hierarchy. Key features include 48 MHz maximum CPU frequency, 32 KB program Flash, 4 KB SRAM, an 8-channel 12-bit SAR ADC, one low-power UART, two SPI modules, one I2C module, a 6-bit timer/PWM module, and a real-time clock (RTC). Multiple low-power modes (Wait, Stop, VLPS, VLLS0/1/3) plus a low-power timer and low-power UART enable deep sleep currents in the microamp range, allowing years of operation from a single coin cell. The device leverages the Cortex-M0+ architecture with single-cycle I/O access, a hardware multiplier, and the Nested Vectored Interrupt Controller (NVIC). On-chip peripherals are interconnected through a flexible peripheral bridge, and the high-efficiency Cortex-M0+ pipeline keeps dynamic power consumption well below typical 8/16-bit MCUs at equivalent throughput. Typical applications include wearable fitness and health monitors, portable medical sensors, smart remote controls, battery-powered IoT sensor nodes, low-end consumer electronics, and electronic shelf labels (ESL). The combination of small package, low active power, and rich peripherals makes it ideal for any space-constrained, energy-harvesting or battery-operated product. When designing with this MCU, use the exposed thermal pad as the primary ground connection and stitch multiple vias beneath it to the internal ground plane to minimize ground bounce and improve thermal performance. Decouple VDD/VREFL with a 100 nF ceramic capacitor placed within 3 mm of the supply pins. This page synthesizes distributor pricing, same-family NXP alternatives, and practical design notes not consolidated in the manufacturer datasheet, giving engineers a single source for Kinetis KL02 selection and procurement.

Angebot Kontakt

MKL02Z8VFG4

MKL02Z8VFG4 - 48MHz Cortex-M0+ MCU | NXP Semiconductors

The NXP Semiconductors MKL02Z8VFG4 is an ultra-low-power 32-bit microcontroller built around the Arm Cortex-M0+ processor, operating at up to 48 MHz with 8 KB of flash memory and 1 KB of SRAM in a 16-QFN 3 x 3 mm package. It is designed for compact, cost-sensitive, battery-operated devices that need efficient control, low-power operation, and a small PCB footprint. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into one device. The MKL02Z8VFG4 belongs to the Kinetis KL0x family, which provides an entry point into the Kinetis L series. Its Cortex-M0+ architecture supports compact embedded software while retaining familiar microcontroller peripherals, interrupt handling, and low-power operating modes for consumer, sensing, and industrial control products. The principal device characteristics include a 48 MHz maximum CPU frequency, 8 KB flash, 1 KB SRAM, a 16-QFN package, and a stated operating-temperature range of -40°C to +105°C. NXP identifies the part as active. The device also includes a 12-bit analog-to-digital converter, enabling compact products to measure analog signals without requiring a separate converter when the chosen analog front end and application requirements are compatible. The small 3 x 3 mm QFN package makes the MKL02Z8VFG4 appropriate for space-constrained products such as portable health devices, remote sensing nodes, compact consumer accessories, and low-power embedded controls. Its 8 KB flash footprint favors concise firmware, while 1 KB of SRAM supports the working memory required by lightweight control loops, configuration handling, and basic serial communication. The Cortex-M0+ platform and Kinetis L-series ecosystem also support migration from simpler 8-bit designs into a 32-bit software environment. Power-system design should begin with the exact operating modes, clock configuration, and peripheral states required by the end product. Because the MCU is intended for ultra-low-power systems, enable only the clocks and peripherals needed for each mode, and confirm wake timing against the required response time. Place the decoupling network close to the supply pins and preserve the exposed-pad connection recommended in the manufacturer package documentation to maintain electrical and thermal performance. This page combines the confirmed device identity, package, memory configuration, operating characteristics, application guidance, and packaging information with a conservative replacement analysis. Replacement candidates must be checked for exact pin mapping, boot behavior, peripheral availability, memory capacity, and software compatibility before being treated as production drop-ins. The Request a Quote form on this page can be used to request current availability, MOQ, lead time, and sourcing support for the exact MPN. The Kinetis KL02 family is also recognized by Arm Keil as supporting low-power devices, remote-sensing nodes, portable consumer products, and ingestible healthcare sensing. These use cases align with the MKL02Z8VFG4 combination of a Cortex-M0+ core, 8 KB flash, 1 KB SRAM, and a compact 16-QFN package. Firmware footprint, analog requirements, I/O count, temperature exposure, and package-level pin compatibility remain the decisive checks for each new design.

Angebot Kontakt

MKL03Z32VFG4

MKL03Z32VFG4 - 48MHz 32KB Cortex-M0+ MCU | NXP | IoT

The NXP Semiconductors MKL03Z32VFG4 is an ultra-low-power 32-bit Arm Cortex-M0+ microcontroller with a 48 MHz core, 32 KB flash memory, and 2 KB SRAM, packaged in a compact 16-QFN enclosure measuring 3 x 3 mm. It is designed for portable and space-constrained applications where low power consumption, compact size, and efficient processing must coexist in a single device. A microcontroller is a programmable integrated circuit containing a processor core, nonvolatile program memory, working memory, and peripherals. The MKL03Z32VFG4 belongs to the Kinetis KL03 family, an entry point into NXP's Kinetis L-series of Arm Cortex-M0+ devices. Its 48 MHz operating frequency supports responsive control and measurement tasks while maintaining low system power, making it suitable for battery-powered sensors, portable instruments, and connected edge devices. Key verified features include an Arm Cortex-M0+ processor core, 48 MHz maximum frequency, 32 KB flash, and 2 KB SRAM. The device also provides flexible clocking options and integrated power management, which help designers optimize energy use across active and low-power operating modes. Its small 16-QFN package supports dense PCB layouts while exposing the required connectivity and peripheral resources. The MKL03Z32VFG4 is positioned for portable applications requiring a compact, energy-efficient MCU rather than a high-performance processor. Its architecture is appropriate for simple control loops, sensor conditioning, low-rate communication, and embedded logic where deterministic peripheral interaction matters more than large memory capacity. The 32 KB flash footprint is well suited to compact firmware images and application-specific control code. Typical applications include wearable accessories, low-power sensor nodes, smart-home devices, battery-operated measurement equipment, portable medical accessories, and embedded control modules. Its small footprint is especially useful when PCB area is limited and low standby power is important. Designers should confirm the exact peripheral assignments, pin multiplexing, clock configuration, voltage limits, and memory map in the NXP manufacturer documentation before layout. The 3 x 3 mm QFN package also requires careful thermal-pad and solder-assembly planning. This page consolidates verified NXP and distributor information, pricing context, technical comparisons, and application guidance for engineers evaluating the MKL03Z32VFG4.

Angebot Kontakt

MKL03Z32VFK4

MKL03Z32VFK4 - 48MHz Cortex-M0+ MCU, 32KB Flash | NXP

The NXP Semiconductors MKL03Z32VFK4 is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller from the Kinetis KL03 sub-family, featuring 32KB of flash memory, 2KB of SRAM, and a maximum CPU frequency of 48 MHz, housed in a compact 24-pin QFN (4x4 mm) package. It is engineered for space-constrained, energy-efficient embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile memory (SRAM), non-volatile memory (flash), and a rich set of peripherals. The Cortex-M0+ is the smallest and most energy-efficient ARM core, designed for deterministic embedded control and ultra-low-power operation. The Kinetis KL03 belongs to NXP's KL0x family - the entry point into the Kinetis L series - and is software- and tool-compatible with all other Kinetis L series devices, easing migration from 8-bit architectures. In the broader hierarchy: Cortex-M0+ -> ARM Cortex-M -> 32-bit RISC core -> microcontroller -> semiconductor IC. Key specifications include 32KB program flash, 2KB SRAM, a 48 MHz maximum core frequency, an operating voltage range of 1.71V to 3.6V, and an ultra-low-power Run mode drawing well under 100 uA/MHz. The device integrates a 12-bit ADC, low-power UART, SPI, I2C, multiple timers, and a low-power comparator, alongside NXP's standard low-leakage wakeup unit. The 24-QFN (4x4 mm) package delivers a small PCB footprint suited to wearable and IoT form factors. The KL03 architecture uses an ARM Cortex-M0+ core with a single-cycle I/O bus and a low-latency interrupt controller, allowing deterministic response while drawing only microamps in deep sleep. On-chip voltage regulation and flexible low-power modes (VLLS, VLLS1, VLLS3, LLS, HSRUN, RUN, WAIT, STOP) make it ideal for battery-powered applications that must spend most of their life in sleep states. Typical applications include wearable fitness and health sensors, ultra-low-power wireless sensor nodes, IoT endpoints, smart home and building automation nodes, and battery-powered portable instrumentation. Designers choose the KL03 when they need the smallest possible Cortex-M0+ footprint with NXP's proven Kinetis peripheral set. When designing with this device, prioritize short, clean PCB traces between the decoupling capacitors and VDD/VSS pins to keep noise low and to support rapid wake transitions. Use the Kinetis SDK and MCUXpresso toolchain for code generation, and verify that your code uses only the on-chip peripherals to preserve the KL03's low-power advantage. This page synthesizes distributor pricing, drop-in Kinetis alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers shorten the device selection and PCB bring-up cycle for Kinetis KL0x designs.

Angebot Kontakt

MKL03Z32VFK4R

MKL03Z32VFK4R - 48MHz Cortex-M0+ MCU 32KB Flash | NXP

The NXP Semiconductors MKL03Z32VFK4R is a 32-bit ARM Cortex-M0+ microcontroller from the Kinetis KL0x ultra-low-power MCU family, integrating 32 KB of flash memory and 2 KB of SRAM in a compact 24-pin QFN (4x4 mm) package. It runs at up to 48 MHz core frequency and supports 1.8 V, 2.5 V, and 3.3 V supply rails, making it the entry-level node of NXP's Kinetis L series. The part is qualified to AEC-Q100 standards for automotive applications and is offered on Tape & Reel packaging. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (flash), working memory (SRAM), and programmable peripherals. The Cortex-M0+ is ARM's smallest and most energy-efficient application processor core, designed for always-on battery-powered devices. Within the taxonomy: microcontroller -> embedded system -> semiconductor -> integrated circuit. The KL0x family sits at the bottom of NXP's Kinetis L (Low-power) sub-tree, optimized for energy-harvesting and coin-cell designs. Key features include an ARM Cortex-M0+ core (Thumb/Thumb-2 instruction set, hardware single-cycle multiplier), low-power run, wait, stop, and VLLS modes, a 12-bit SAR ADC, a low-power timer, an analog comparator, and a flexible SPI/UART/I2C peripheral set. The 24-QFN package exposes up to 22 GPIO, supports single-cycle bit-banding in SRAM, and integrates a 32 kHz RTC oscillator. The device consumes approximately 1.5 mA active and sub-uA in deep-stop modes. The MKL03Z32VFK4R's ultra-low-power architecture, small 4x4 mm QFN footprint, and 48 MHz performance enable its use in space-constrained, energy-constrained designs. Typical applications include wearable fitness bands, IoT sensor nodes, energy-harvesting switches, automotive body controllers, and battery-powered metering peripherals. The Cortex-M0+ is binary-compatible upward with Cortex-M3/M4, so code can scale across NXP Kinetis families without architectural changes. When designing with this MCU, allocate decoupling capacitors (100 nF and 4.7 uF) adjacent to each power pin and follow NXP's QFN land-pattern guidelines to maximize thermal dissipation through the exposed pad. Programming is supported through NXP's Kinetis SDK and the LPCXpresso / MCUXpresso IDE toolchain. This page synthesizes distributor pricing, pin-compatible Kinetis KL0x variants, and practical PCB layout guidance not collected in any single manufacturer document.

Angebot Kontakt

MKL03Z8VFK4

MKL03Z8VFK4 - 48MHz ARM Cortex-M0+ MCU 8KB Flash | NXP

The NXP Semiconductors MKL03Z8VFK4 is an ARM Cortex-M0+ based Kinetis KL03 ultra-low-power 32-bit microcontroller running at 48 MHz, with 8 KB of Flash program memory and 2 KB of SRAM, offered in a 24-pin QFN (4x4 mm) package. A microcontroller (MCU) is an integrated circuit that combines a processor core, program memory, data memory, and a rich set of peripherals into a single chip used to embed control logic in electronic systems. The Cortex-M0+ core is the smallest and most energy-efficient member of the ARM Cortex-M family, designed for deterministic embedded control in cost- and power-sensitive products. Within NXP's portfolio, the KL0x family is the entry point of the Kinetis L series, providing a migration path for legacy 8-bit users into the ARM ecosystem while remaining software- and tool-compatible with all other Kinetis L series devices. Key features of the MKL03Z8VFK4 include a 48 MHz Cortex-M0+ core with single-cycle I/O access, 8 KB Flash and 2 KB SRAM, an ultra-low-power run mode down to 50 uA/MHz, multiple low-leakage stop modes, a low-power UART, 6-bit timer/PWM, and a tiny 1.6 x 2.0 mm WLCSP option (other variants). The 24-QFN (4x4) package provides a compact ~16 mm2 footprint ideal for space-constrained wearables and sensor nodes. The KL03 architecture uses the Cortex-M0+ core with a configurable NVIC, single-cycle 32x32 multiplier, and a 4-channel DMA controller. Its ultra-low-power design supports multiple stop modes with RAM retention, fast wake-up times, and an integrated low-power timer that keeps basic timing functions alive while the core is halted, making the part well suited to battery-powered always-on applications. Typical applications include wearable fitness bands, IoT sensor endpoints, low-power remote controls, smart metering nodes, and small consumer appliances. The combination of low active power, deep-sleep capability, and the tiny WLCSP/QFN footprint lets designers squeeze MCU functionality into coin-cell powered enclosures. When designing with the KL03, ensure the VDDC and VDD pins are properly decoupled with 100 nF ceramic capacitors placed within a few millimeters of the pins, and pay attention to the low-power UART and external crystal requirements for stop-mode wake-up timing. Source current ratings from the NXP Kinetis KL03 reference manual, not just the simplified datasheet, when budgeting battery life. This page synthesizes distributor pricing tiers, drop-in Kinetis KL0x family alternatives, and practical PCB-level design notes that are not assembled on any single manufacturer page, giving engineers a single decision-ready view of the MKL03Z8VFK4.

Angebot Kontakt

MKL04Z16VLF4

MKL04Z16VLF4 - 48MHz Cortex-M0+ MCU 16KB Flash | NXP

The NXP Semiconductors MKL04Z16VLF4 is an ARM Cortex-M0+ based ultra-low-power microcontroller from the Kinetis KL0x family, featuring a 48 MHz core, 16 KB of Flash, and 2 KB of SRAM in a 48-pin LQFP (7x7 mm) package. It targets 8-bit customers migrating into the Kinetis L portfolio while remaining software and tool compatible with all other Kinetis L series devices, with 1.71-3.6V supply. What is a Kinetis KL0x microcontroller? The Kinetis KL0x family is NXP's entry-level ultra-low-power 32-bit MCU line based on the ARM Cortex-M0+ core. It sits at the base of the Kinetis L series hierarchy: Cortex-M0+ core -> ARM Cortex family -> 32-bit MCU -> microcontroller -> semiconductor. The family provides a bridge for 8-bit users transitioning to 32-bit performance while retaining low-power simplicity. Key features include 16 KB of embedded Flash, 2 KB of SRAM, a low-power ARM Cortex-M0+ core running at up to 48 MHz, multiple low-power modes (Wait, Stop, VLPR, VLPS, LLS, VLLS0/1/3), and an operating voltage range of 1.71V to 3.6V. The MKL04Z16VLF4 also integrates peripherals such as 12-bit ADC, analog comparator, low-power UART, low-power timer, and an SPI/I2C capable serial interface, providing ample connectivity for cost-sensitive designs. The device uses a Cortex-M0+ core with single-cycle I/O access and a Harvard bus architecture, achieving 0.95 DMIPS/MHz performance. On-chip peripherals operate directly from the ARM core through AMBA AHB-Lite, enabling deterministic real-time behavior. The KL04 sub-family is the smallest memory variant in the KL0x line, optimized for applications requiring minimal RAM and Flash. Typical applications include battery-powered sensor nodes, wearable fitness bands, electronic shelf labels, remote controls, low-end portable medical devices, and 8-bit replacement upgrades. The 1.71V minimum supply and sub-µA deep-sleep currents make it ideal for coin-cell powered products. When designing with this part, attention must be paid to the 48-LQAF pinout including analog reference pins (VREFH/VREFL) and the choice of reset configuration to ensure boot mode selection. A 0.1 µF decoupling capacitor close to each VDD/VSS pair is recommended, and unused analog inputs should be tied to a defined voltage to avoid ADC leakage. This page synthesizes distributor pricing, drop-in Kinetis alternatives, and practical design notes not found in the manufacturer datasheet alone.

Angebot Kontakt

MKL04Z32VFK4

MKL04Z32VFK4 - 48MHz 32KB Cortex-M0+ MCU | NXP | 24-QFN

The NXP Semiconductors MKL04Z32VFK4 is a 48 MHz Arm Cortex-M0+ microcontroller with 32 KB of embedded Flash memory, 4 KB of SRAM, and a 24-QFN 4 x 4 mm package. Designed as an entry point into the Kinetis L series, it combines an ultra-low-power architecture with software and tool compatibility across the broader Kinetis L family. Its 32-bit processing core and compact package support cost-sensitive embedded products that need deterministic control without a large external memory system. What is an ultra-low-power Cortex-M0+ microcontroller? It is a 32-bit embedded-processing device built around the Arm Cortex-M0+ core, a compact instruction-set architecture intended for cost-sensitive control applications. Within the product hierarchy, this MCU is a microcontroller, embedded processor, and semiconductor. Compared with larger Cortex-M processors, the M0+ core emphasizes efficient code density, low energy use, and a small peripheral set rather than high-performance computing or extensive connectivity. Key verified features include a maximum operating frequency of 48 MHz, 32 KB Flash, 4 KB SRAM, and a 12-bit ADC. The device operates from a 1.71 V to 3.6 V supply and is specified across -40 degrees C to +105 degrees C. Its 24-QFN package measures 4 x 4 mm, making it suitable for compact industrial, consumer, sensor, and battery-powered equipment. The Kinetis L family positioning also provides a migration path from 8-bit designs without abandoning familiar tool workflows. The MKL04Z32VFK4 combines a small Cortex-M0+ core with analog measurement support and serial peripherals. Firmware can execute directly from internal Flash, reducing external component count and helping simplify compact PCB layouts. Its 4 KB SRAM supports control buffers, acquisition state, and communication stacks, although memory-heavy buffering may require careful partition design. The 12-bit ADC makes the device useful for direct sensor acquisition rather than relying entirely on external converters. Typical uses include low-cost condition-monitoring controllers, compact sensor nodes, industrial control modules, battery-powered instruments, and basic data-acquisition products. In these systems, the MCU can digitize analog inputs, apply control logic, and manage low-speed communications within a small board area. For designs needing higher performance, larger memory, USB, or advanced connectivity, a higher-tier Kinetis L or other Cortex-M MCU may be preferable. The primary design consideration is power architecture. Keep the 1.71 V to 3.6 V supply within its operating range, provide suitable decoupling at VDD pins, and reserve the exposed thermal pad according to the package land pattern. Route sensitive analog inputs away from switching nodes and high-current return paths to preserve signal quality. This page consolidates verified NXP and distributor information, package and application guidance, and engineering-oriented selection criteria that are not all present in a distributor catalog entry. It also distinguishes confirmed data from specifications that still require confirmation from the manufacturer datasheet.

Angebot Kontakt

MKL04Z32VFM4

MKL04Z32VFM4 - 48MHz Cortex-M0+ 32KB Flash MCU | NXP

The NXP Semiconductors MKL04Z32VFM4 is a 32-bit Arm Cortex-M0+ microcontroller from the Kinetis KL04 (KL0x) family, running at up to 48 MHz with 32 KB flash and 4 KB SRAM in a 32-pin HVQFN (5x5 mm) package. A microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory, data memory, and peripherals such as timers, serial interfaces, and analog-to-digital converters. Within the MCU hierarchy, the Kinetis L series sits in the ultra-low-power 32-bit segment, and the KL0x family is its entry point, offering a bridge for 8-bit MCU users migrating to 32-bit Arm architecture while remaining software and tool compatible with all other Kinetis L devices. Key features of the MKL04Z32VFM4 include the efficient Cortex-M0+ core, which delivers ARM Cortex-class performance at very low power consumption, 32 KB of on-chip flash program memory for firmware storage, and 4 KB of SRAM for data. The 48 MHz maximum CPU clock supports real-time embedded control tasks, and the compact 5x5 mm QFN package suits space-constrained designs. The industrial temperature grade supports operation in harsh environments. Technically, the KL04 family uses NXP's low-power process technology and shares the Kinetis software ecosystem, including MCUXpresso SDK and tool compatibility across the Kinetis L portfolio. The Cortex-M0+ core's two-stage pipeline and reduced instruction complexity keep dynamic power low, making the device suitable for battery-powered and always-on applications. Typical applications include small consumer appliances, portable battery-powered devices, tactile and capacitive-sensing interfaces, simple motor control, and 8-bit MCU upgrades in industrial sensors. When designing with this MCU, verify supply voltage range, peripheral set, and pinout against the manufacturer datasheet before finalizing the PCB footprint, since the KL04 family is offered in multiple memory and package variants. This page synthesizes verified distributor data, drop-in same-family alternatives, pricing tiers, and practical design notes not found in a single manufacturer datasheet.

Angebot Kontakt

MKL04Z32VLF4

MKL04Z32VLF4 - 48MHz Cortex-M0+ 32KB Flash MCU | NXP | LQFP-48

NXP MKL04Z32VLF4 is a 32-bit ARM Cortex-M0+ microcontroller from the Kinetis KL04 sub-family, operating at up to 48 MHz with 32 KB of on-chip Flash and 4 KB of SRAM, housed in a 48-pin LQFP package (7x7 mm). It is the entry-level device of the Kinetis L series, designed for ultra-low-power applications and providing a bridge path for engineers migrating from 8-bit microcontrollers into the ARM Cortex-M ecosystem. What is a Kinetis L microcontroller? The Kinetis L family is NXP's ultra-low-power ARM Cortex-M0+ MCU portfolio, positioned below the Cortex-M4-based Kinetis K series. It targets battery-powered and energy-harvesting products where every microamp of quiescent current matters. Within the L series, the KL0x sub-family is the smallest and lowest-cost entry, while KL1x/2x/4x add richer peripherals and higher memory. Architecturally, an ARM Cortex-M0+ core sits on an advanced bus matrix with low-power peripherals and a flexible low-leakage wake-up unit, making the Kinetis L a power management IC companion in any embedded system. Key features include 32 KB program Flash, 4 KB SRAM, an 8-channel 12-bit SAR ADC, two analog comparators, a low-power hardware touch-sensing interface (TSI), up to 41 general-purpose I/O pins, and multiple serial peripherals including UART, SPI, and I2C. The device supports operating voltages from 1.71 V to 3.6 V and offers several low-power modes (Wait, Stop, VLPR, VLPS) that draw single-digit microamp currents, enabling years of battery life on coin-cell powered designs. The Cortex-M0+ core delivers 0.95 DMIPS/MHz with a two-stage pipeline and Thumb-2 instruction set compatibility. Typical applications include wearable fitness bands, remote controls, wireless sensor node endpoints, electronic shelf labels, smart-meter peripherals, low-end Bluetooth/BLE beacons, and consumer toys. The wide memory map and Kinetis peripheral compatibility also make the KL04 suitable as a co-processor or I/O expander in larger designs. Industrial and home appliance sub-modules (HMI buttons, motor control via PWM) are additional use cases. When designing with the MKL04Z32VLF4, ensure the decoupling network follows NXP's Kinetis L reference design: a 0.1 uF ceramic capacitor close to each VDD pin plus a bulk 4.7 uF capacitor. The LQFP-48 package has an exposed pad (pin 49/die pad) that must be soldered to the ground plane for thermal and electrical performance. The internal 1.2 V core regulator requires a 2.2 uF capacitor on VDCDC to operate correctly.

Angebot Kontakt

MKL04Z8VFK4

MKL04Z8VFK4 - 48MHz Cortex-M0+ 8KB MCU | NXP

The NXP Semiconductors MKL04Z8VFK4 is an ultra-low-power 32-bit Arm Cortex-M0+ microcontroller operating at 48 MHz, with 8 KB of flash memory, 1 KB of SRAM, and a 24-QFN 4 x 4 mm package. It belongs to the Kinetis KL0x family, where KL0x forms the entry point into the Kinetis L series for customers migrating from 8-bit systems. A microcontroller is a programmable semiconductor that integrates a processor core, program memory, data memory, and peripherals into one device. The MKL04Z8VFK4 uses the Arm Cortex-M0+ architecture, a compact 32-bit processor designed for cost-sensitive embedded control. Its role within an embedded system is to execute application code, read inputs, control outputs, and manage communications or timing functions without requiring a separate processor. The principal device parameters are a 48 MHz maximum clock frequency, 8 KB of flash memory, and 1 KB of SRAM. The operating supply identified for this 3.3 V device is 3.3 V. Its 24-QFN package uses a compact 4 x 4 mm land pattern, making it suitable for small embedded-control assemblies where board area is important. The exposed-pad package construction also provides a thermal and electrical land area on the PCB. The MKL04Z8VFK4 belongs to the Kinetis L series, and NXP describes the KL0x family as software and tool compatible with other Kinetis L series devices. This ecosystem relationship is important because an existing Kinetis L code base, development setup, or peripheral configuration workflow can reduce adoption effort. The device is identified as an ARM Cortex-M0+ Kinetis KL0 microcontroller with an active lifecycle status. Typical uses include compact sensor-control nodes, simple industrial controls, low-power monitoring modules, and cost-sensitive embedded products where a small package, modest memory footprint, and straightforward 32-bit control architecture are valuable. The 8 KB flash allocation is most appropriate for focused control firmware rather than graphics-heavy or connectivity-intensive workloads. Designers should use the NXP pin-description table when assigning PCB tracks because a complete 24-pin map is not included in the source material for this page. Confirm that flash, SRAM, clock, and peripheral requirements fit the application before finalizing firmware allocation. The 24-QFN land pattern also demands careful assembly planning because fine-pitch packages are sensitive to thermal profiles, pad alignment, and contamination. This page organizes the verified device identity, memory and package characteristics, replacement analysis, and practical selection guidance into one engineering-focused resource. It is intended to help embedded developers compare the MKL04Z8VFK4 with nearby NXP Kinetis options before committing the same PCB footprint, firmware environment, and supply plan to a production design.

Angebot Kontakt

MKL04Z8VFM4

MKL04Z8VFM4 - 48MHz Cortex-M0+ 8KB Flash MCU, 32-HVQFN | NXP

The NXP MKL04Z8VFM4 is an ultra-low-power 32-bit Arm Cortex-M0+ microcontroller operating up to 48 MHz, with 8 KB of embedded flash memory and 1 KB of SRAM, housed in a 32-pin HVQFN (5 x 5 mm) surface-mount package. A microcontroller (MCU) is a single integrated circuit that bundles a CPU core, program memory, data memory and peripheral blocks such as GPIO, timers and serial interfaces on one die. An MCU therefore sits at the bottom of the embedded hierarchy: microcontroller -> embedded processor -> semiconductor. The MKL04Z8VFM4 belongs to the NXP Kinetis KL0 series, the entry point of the Kinetis L family, and targets cost-sensitive, space-constrained designs where a full Cortex-M4 or Cortex-M7 is unnecessary. Key features of this device include a 48 MHz Arm Cortex-M0+ core with a 32-bit architecture, 8 KB (8K x 8) of on-chip flash for program storage, 1 KB of SRAM for data and stack, and a compact 32-pin HVQFN footprint measuring only 5 x 5 mm. NXP lists the device as Active, and the KL0 series is characterized by ultra-low-power operation for battery-driven equipment. The small package leaves board area for sensors, passives and antenna keep-out in wearables and compact sensor nodes. Technically, the Cortex-M0+ core extends the Armv6-M architecture with faster single-cycle GPIO handling, improved debug features and a hardware divide instruction, while keeping the code footprint small and the energy per operation low. The KL04 derivative combines this core with a low-power clocking scheme and a minimal peripheral set, which keeps both active current and standby current low without requiring an external crystal for many designs. Typical applications include Bluetooth and Zigbee radio modules, wireless sensor nodes, smart-home accessories, wearables, small USB-connected accessories, toys and simple control boards. Because the flash and SRAM budget is deliberately small, firmware must be compact and interrupt driven. The main design consideration is memory budget. With only 1 KB of SRAM, stack depth, buffer sizes and RTOS use must be planned carefully, and code should be kept under 8 KB of flash. Confirm the full pin list and electrical limits in the manufacturer datasheet before laying out the board. This page consolidates the core Kinetis KL04 specifications, drop-in alternatives from the same NXP family, a parameter-by-parameter comparison table and practical design notes that go beyond the basic datasheet summary.

Angebot Kontakt

MKL05Z16VLC4

MKL05Z16VLC4 - 48MHz Cortex-M0+ MCU 16KB Flash LQFP-32 | NXP

The NXP Semiconductors MKL05Z16VLC4 is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller in the Kinetis KL0x sub-family, integrating 16 KB of Flash program memory and 2 KB of SRAM in a 32-pin LQFP (7x7 mm) package. It operates at a core frequency of 48 MHz from a wide 1.71 V to 3.6 V supply, making it suitable for both 1.8 V and 3.3 V system rails. The part is identified by the designator ‘VLC4’ in the part numbering scheme, indicating the 32-LQFP package and the -40C to +105C industrial temperature grade. An ARM Cortex-M0+ microcontroller is the entry-tier 32-bit core in the ARM Cortex-M family, designed for energy-efficient embedded applications. The Kinetis KL05 sub-family sits at the most resource-constrained node of the Kinetis L series, optimized for ultra-low-power operation and serving as a software- and tool-compatible migration path for legacy 8-bit MCU users. The Cortex-M0+ core implements the ARMv6-M instruction set with a 2-stage pipeline, delivering competitive DMIPS/mW while remaining compatible with the broader ARM Cortex-M ecosystem. Key features of the MKL05Z16VLC4 include a 48 MHz maximum CPU frequency, 16 KB Flash program memory, 2 KB SRAM, a low-power ARM Cortex-M0+ core, multiple low-power operating modes (Run, Wait, Stop, VLPR, VLPS, LLS, VLLSx), an integrated 12-bit ADC with DMA support, and a flexible low-power timer/LPTMR. A 32-channel DMA, CRC engine, and standard serial interfaces (UART, SPI, I2C) are integrated. The device includes an internal clock source, hardware touch-sensing interface (TSI), and a ROM bootloader for in-system programming. Architecturally, the MKL05Z16VLC4 leverages the Cortex-M0+ core tightly coupled with NXP’s low-power peripheral set and an integrated voltage regulator that supports multiple internal core voltage domains. This allows the device to enter deep-sleep states while retaining interrupt capability, with wake-up times in the single-digit microsecond range from VLLS modes. The 32-LQFP industrial package and 7x7 mm footprint provide an easy-to-route pinout for hand-soldered prototypes and high-volume SMT assembly. Typical applications include ultra-low-power sensor nodes, battery-powered IoT endpoints, wearable fitness bands, smart-metering sub-systems, industrial remote-control HMI, portable consumer electronics, and small home appliances. The wide operating voltage range and ultra-low-power Run/Stop modes make it ideal for coin-cell powered devices and Energy Harvesting designs where quiescent current dominates battery life. When designing with the MKL05Z16VLC4, observe the recommended decoupling scheme: a 100 nF X7R ceramic capacitor placed within 2 mm of each VDD/VSS pair, plus a bulk capacitor of 1 uF or larger on the main supply rail. Unused GPIO pins should be configured as outputs driven low (or inputs with the internal pull-up enabled) to minimize quiescent current in VLLS modes. This page synthesizes distributor inventory, parameter-by-parameter comparison against package-equivalent Kinetis KL0x variants, and practical design considerations that complement the manufacturer datasheet.

Angebot Kontakt

MKL05Z32VFK4

MKL05Z32VFK4 - 48MHz Cortex-M0+ 32KB Flash MCU | NXP

The NXP Semiconductors MKL05Z32VFK4 is a 32-bit ARM Cortex-M0+ Kinetis KL0x microcontroller operating at up to 48 MHz, with 32KB Flash program memory, 4KB SRAM, and a 24-pin QFN (4x4 mm) package with exposed pad. A microcontroller (MCU) is a single-chip computer integrating a processor core, memory, and peripherals on one die. Within the MCU hierarchy, the Kinetis KL0x family is the entry point into NXP's Kinetis L series, which is built on the energy-efficient ARM Cortex-M0+ core - the most power-optimized member of the ARM Cortex-M profile, designed to replace 8-bit and 16-bit MCUs in cost- and power-sensitive embedded systems. Key features include 48 MHz core operation, 32KB of on-chip Flash, 4KB of SRAM, supply operation at 1.8V, 2.5V, or 3.3V, and an integrated peripheral set covering multiple timers, a real-time clock (RTC), an analog comparator, and a 4-channel DMA controller. The Cortex-M0+ pipeline with its two-stage design delivers low dynamic power consumption, and the small 4x4 mm QFN-EP footprint suits space-constrained designs. Technically, the KL0x family shares the Kinetis software and tool ecosystem - NXP MCUXpresso SDK and IDE, plus third-party tool support - which shortens time to market and allows migration upward to KL1x/KL2x devices when flash or peripheral requirements grow. The 24-QFN exposed-pad package also improves thermal performance and provides a low-inductance ground return. Typical applications include small consumer appliances, portable battery-powered devices, simple motor control and lighting systems, and sensor-interface nodes where 8-bit migration to 32-bit is desired. The RTC and low-power modes support always-on designs with limited energy budgets. A key design consideration is the modest 4KB SRAM: communication stacks or large buffering schemes must be planned carefully, and applications needing USB or larger RAM should step up to other Kinetis family members. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet, with pricing referenced as of 2026-10-18.

Angebot Kontakt

MKL05Z32VLF4

MKL05Z32VLF4 - 48MHz Cortex-M0+ MCU, 32KB Flash | NXP

The NXP Semiconductors MKL05Z32VLF4 is a 32-bit ARM Cortex-M0+ microcontroller from the Kinetis KL0x family, delivering up to 48 MHz CPU performance with 32 KB of on-chip Flash and 4 KB of SRAM in a 48-pin LQFP (7x7 mm) package. It is designed as an entry-point MCU for the Kinetis L ultra-low-power series, targeting 8-bit customers migrating to the ARM ecosystem while remaining software- and tool-compatible with other Kinetis L devices. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals on one die. The Cortex-M0+ is ARM's smallest and most energy-efficient application processor core, intended for deterministic embedded workloads. Kinetis L MCUs form a sub-family of NXP's Kinetis portfolio optimized for ultra-low-power (ULP) operation, making them well suited for battery-powered products where every microamp of quiescent current matters. Key features include 32 KB Flash, 4 KB SRAM, an ultra-low-power ARM Cortex-M0+ core running at up to 48 MHz, an operating voltage range of 1.8 V to 3.6 V, a low-power real-time clock (RTC), and multiple serial interfaces including UART, SPI, and I2C. The 48-LQFP package is industry standard and easy to hand-solder or reflow, with a thermal resistance suitable for consumer and industrial ambient temperatures from -40 C to +105 C. Architecturally, the KL0x family combines a Cortex-M0+ core with NXP's low-power peripheral set, segmented run/sleep/wait modes, and a flexible clock tree. The result is a deterministic MCU with predictable interrupt latency and very low run current (~4 mA typical), enabling coin-cell and energy-harvesting designs where larger Cortex-M3/M4 parts would be excessive. Typical applications include low-power wearables, IoT sensor nodes, battery-powered HVAC controllers, simple motor control, and 8-bit-to-32-bit migration projects where engineers want ARM Cortex-M0+ performance without stepping up to higher-cost Cortex-M3/M4 devices. The compact 48-LQFP footprint also simplifies retrofits of legacy 8-bit designs. When designing with this MCU, remember that the 48-LQFP package has a moderate thermal resistance; for sustained high-MIPS workloads, derate ambient temperature or move to the larger 64-LQFP Kinetis L siblings. The internal 1 kHz low-power oscillator and flexible clocking must be configured correctly to honor the ultra-low-power marketing claim - default out-of-reset clock settings can idle the CPU at higher current than expected. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers rapidly evaluate the MKL05Z32VLF4 for new designs and field replacements.

Angebot Kontakt

Unterkategorien

Produkte (39.000+)

MKE04Z8VWJ4 - Cortex-M0+ 48MHz MCU, 8KB Flash, 20-SOIC | NXP

MKE14F512VLL16 - Kinetis KE14F 168MHz Cortex-M4F 512KB | NXP

MKE14F512VLL16557 - 168MHz Cortex-M4F 512KB MCU | NXP

MKE15Z128VLH7557 - 128KB Flash Cortex-M0+ 72MHz MCU | NXP

MKE15Z256VLH7 - 72MHz Cortex-M0+ MCU 256KB Flash | NXP

MKE15Z256VLH7557 - 72MHz Cortex-M0+ 256KB MCU | NXP

MKE15Z256VLL7557 - 72MHz Cortex-M0+ MCU 256KB Flash LQFP-100 | NXP

MKE18F512VLL16557 - 512KB Flash Cortex-M4F MCU | NXP

MKL02Z16VFG4 - 48MHz Cortex-M0+ 16KB Flash MCU | NXP

MKL02Z32VFM4R - 48MHz Cortex-M0+ MCU, 32KB Flash | NXP

MKL02Z8VFG4 - 48MHz Cortex-M0+ MCU | NXP Semiconductors

MKL03Z32VFG4 - 48MHz 32KB Cortex-M0+ MCU | NXP | IoT

MKL03Z32VFK4 - 48MHz Cortex-M0+ MCU, 32KB Flash | NXP

MKL03Z32VFK4R - 48MHz Cortex-M0+ MCU 32KB Flash | NXP

MKL03Z8VFK4 - 48MHz ARM Cortex-M0+ MCU 8KB Flash | NXP

MKL04Z16VLF4 - 48MHz Cortex-M0+ MCU 16KB Flash | NXP

MKL04Z32VFK4 - 48MHz 32KB Cortex-M0+ MCU | NXP | 24-QFN

MKL04Z32VFM4 - 48MHz Cortex-M0+ 32KB Flash MCU | NXP

MKL04Z32VLF4 - 48MHz Cortex-M0+ 32KB Flash MCU | NXP | LQFP-48

MKL04Z8VFK4 - 48MHz Cortex-M0+ 8KB MCU | NXP

MKL04Z8VFM4 - 48MHz Cortex-M0+ 8KB Flash MCU, 32-HVQFN | NXP

MKL05Z16VLC4 - 48MHz Cortex-M0+ MCU 16KB Flash LQFP-32 | NXP

MKL05Z32VFK4 - 48MHz Cortex-M0+ 32KB Flash MCU | NXP

MKL05Z32VLF4 - 48MHz Cortex-M0+ MCU, 32KB Flash | NXP