FPGA y CPLD
Productos (6666)
A54SX16A-TQG100A - 24K Gate FPGA 81 I/O TQFP-100 | Microchip
The Microchip Technology (formerly Microsemi/Actel) A54SX16A-TQG100A is an SX-A family antifuse Field Programmable Gate Array (FPGA) with 24,000 system gates, 81 user-programmable I/O pins, and a maximum clock frequency of 227 MHz, housed in a 100-pin TQFP (14x14 mm) surface-mount package. An FPGA (Field Programmable Gate Array) is a semiconductor device containing configurable logic blocks (CLBs) and programmable interconnects that the designer wires together after manufacturing, allowing custom digital logic without fabricating an ASIC. Within the programmable-logic hierarchy, the A54SX16A belongs to the one-time-programmable antifuse FPGA category under the broader classes of programmable logic devices and application-specific integrated circuit alternatives. Antifuse technology stores its configuration physically, offering inherent resistance to radiation-induced configuration upsets and cloning. Key features of the A54SX16A-TQG100A include 24,000 equivalent system gates with approximately 16,000 typical gates available for design implementation, 1,452 configurable logic blocks organized in the SX-A sea-of-modules architecture, and a wide supply voltage range of 2.25V to 5.25V that simplifies integration into mixed-voltage systems. The device is fabricated on a 0.25 um CMOS process and supports an operating temperature range of -40C to +125C (TA), suitable for harsh-environment and automotive-adjacent applications. Technically, the SX-A family delivers high performance through its Sea-of-Modules architecture with low routing delay, achieving a maximum toggle rate of 227 MHz while keeping static power consumption low compared to SRAM-based FPGAs. Because configuration is stored in antifuse elements, the device powers up instantly with no external configuration PROM, reducing board cost, boot time, and configuration-glitch security risks. Typical applications include industrial control and automation logic, glue logic and bus-interface integration, communication and networking control functions, and military or aerospace systems where single-chip integration, low power, and configuration security are valued. Replacing multiple discrete MSI/SSI devices with one A54SX16A reduces board area, assembly cost, and inventory. A key design consideration is that antifuse FPGAs are one-time programmable: programming errors cannot be corrected in-circuit, so thorough simulation and the vendor programming service flow must be completed before commit. Pinout flexibility at design entry should also be fixed before programming. This page synthesizes verified distributor data, drop-in alternatives, and practical design guidance not found in a single manufacturer datasheet.
A54SX16A-TQG100I - 24K Gate Antifuse FPGA, 81 I/O | Microchip
The Microchip Technology A54SX16A-TQG100I is a 24,000-system-gate antifuse FPGA from the SX-A family, delivering up to 81 user-programmable I/O pins in a 100-pin TQFP (TQG100) package with industrial temperature rating (-40C to +85C). Fabricated on a 0.25 um CMOS process, it provides up to 2,012 dedicated flip-flops and non-volatile, single-programmable antifuse interconnect for high security and low power. An antifuse FPGA is a type of field-programmable gate array whose interconnect is permanently programmed at power-up programming time via antifuse links, unlike SRAM-based FPGAs that reload configuration from an external flash device at every boot. Because the configuration is hard-wired, antifuse FPGAs sit within the programmable logic hierarchy (FPGA -> programmable logic device -> digital IC) as a one-time-programmable, non-volatile technology favored where bitstream security, instant-on operation, and radiation robustness matter. Key features of the A54SX16A include the sea-of-modules architecture that simplifies design transfer from the older SX family, dedicated flip-flops with fast setup times, and low static power consumption typical of antifuse technology. With 24K system gates (expandable to 108,000 available system gates across the family), the device targets glue logic integration, bus bridging, state machines, and control-path functions consolidated into a single low-cost chip. The SX-A architecture uses a sea-of-modules routing fabric with a fine-grained logic cell structure, enabling high logic utilization and predictable timing. Programming is performed once using Microchip (Actel) programming hardware; the programmed antifuse network is non-volatile and highly resistant to readback, providing a built-in security advantage over SRAM FPGAs that store bitstreams externally. Typical applications include industrial control and automation boards, aerospace and defense subsystems requiring secure boot logic, communications interface bridging, and legacy design continuity for systems originally qualified around Actel SX/SX-A silicon. When designing with the A54SX16A, remember that antifuse FPGAs are one-time-programmable: exhaustively verify the design in simulation and, where possible, use the same-family SX-A development flow before committing silicon. Package speed-grade and temperature variants are not interchangeable in programming files without re-timing verification. This page synthesizes distributor pricing tiers, drop-in same-package alternatives from the SX-A family, and practical antifuse design notes not consolidated in the manufacturer datasheet.
A54SX16A-TQG144A - 24K Gate Antifuse FPGA 144-TQFP | Microchip
The Microchip Technology (Microsemi) A54SX16A-TQG144A is a 24,000-system-gate antifuse FPGA (approximately 16,000 typical gates) with 113 user I/Os, 1452 configurable logic blocks, and a 227 MHz toggle capability, housed in a 144-pin TQFP (20 x 20 mm) surface-mount package. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing a sea of configurable logic modules and interconnect that designers program to implement custom digital circuits. Within the programmable logic hierarchy, the SX-A family sits in the one-time-programmable (OTP) antifuse FPGA class, as opposed to SRAM-based FPGAs such as Xilinx Spartan or Altera Cyclone devices. Antifuse technology permanently programs each connection at power-up configuration time, giving the device inherent configuration security and no need for an external configuration PROM. Key features include the amorphous-silicon antifuse interconnect with tungsten plug vias, a 2.25 V to 5.25 V single supply operating range, and 0.25 um / 0.22 um CMOS technology. The die uses three layers of metal with the antifuse between Metal 2 and Metal 3. This architecture delivers ASIC-like performance, very low static power, and resistance to bit-stream theft, which is why SX-A remains popular in legacy industrial and defense programs. The sea-of-modules architecture supports 924 usable logic cells organized into 1452 LABs/CLBs, with system performance up to 227 MHz. Because configuration is non-volatile and one-time, the device is immune to configuration readback attacks and eliminates boot-time configuration delays. Typical applications include industrial automation controllers, glueless bus interface and bridge logic, communication equipment control planes, and defense/aerospace legacy designs requiring configuration security. Design consideration: since the device is OTP, thoroughly verify the design through simulation (Libero SoC or legacy Actel toolchains) before programming; there is no rework path after antifuse programming. This page synthesizes distributor pricing, drop-in alternatives across the SX-A TQFP-144 family, and practical design notes not found in the manufacturer datasheet.
A54SX16P-1PQ208I - 16K Gate SX FPGA, 208-PQFP | Microchip
The Microchip Technology (formerly Microsemi/Actel) A54SX16P-1PQ208I is a 16,000-gate SX-family antifase-programmed field programmable gate array (FPGA) with 924 logic modules, 1452 configurable logic blocks (CLBs), 175 user I/O pins, and up to 280 MHz system performance, housed in a 208-pin PQFP (28x28 mm) package with industrial temperature rating (-40C to +85C). An FPGA (field-programmable gate array) is a semiconductor device containing a fabric of programmable logic blocks and interconnects that designers configure in the field via a hardware description language such as Verilog or VHDL. Within the product hierarchy, the A54SX16P belongs to the Actel SX family -> antifase FPGA -> programmable logic IC -> semiconductor. Unlike SRAM-based FPGAs, SX devices program at the factory (via embedded module programming), eliminating the need for external configuration PROMs and improving board security and power-up immediacy. Key features include a sea-of-modules architecture delivering 3.7 ns pin-to-pin clock-to-out, 0.1 ns input setup, and 0.25 ns clock skew, supporting 66 MHz PCI integration in a single chip. The device operates from a nominal 3.3V supply (3.0V to 3.6V range) with 5.0V-tolerant I/O capability, easing mixed-voltage board designs. The 0.35 um CMOS process with antifase interconnect yields 100% resource utilization with 100% pin locking - a notable advantage over SRAM FPGA architectures of the era. The SX architecture uses a sea-of-modules fabric with Combinatorial Modules (CMs) and Register Modules (RMs), achieving a combinatorial CLB delay of approximately 0.8 ns. Because routing is antifase-based, the device is non-volatile, secure against readback, and immune to configuration SEU at power-up, which historically made SX FPGAs popular in aerospace, industrial, and communications platforms. Typical applications include 66 MHz PCI bus interface logic, industrial control and automation glue logic consolidation, telecommunications line-card logic, and legacy military/avionics boards requiring non-volatile programmable logic. When designing with this device, budget the 3.3V core supply and account for the PQFP 28x28 mm footprint and 0.5 mm lead pitch in PCB layout; verify final timing with Microchip (Actel) Designer software after place-and-route. This page synthesizes verified distributor data, drop-in alternatives, pricing context, and practical design notes not found in the manufacturer datasheet.
A54SX16P-1PQG208 - 16K Gate SX FPGA 280MHz | Microchip
The Microchip Technology (Microsemi) A54SX16P-1PQG208 is a 16,000-gate SX-family FPGA built on 0.35 um CMOS technology, delivering 924 logic cells (1452 CLBs), a maximum internal clock frequency of 280 MHz, and 3.3V operation with 5.0V-tolerant I/O in a 208-pin PQFP (PQG208) surface-mount package. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing configurable logic blocks (CLBs) and programmable interconnects that the designer wires together post-manufacture. Within the programmable logic hierarchy, the SX family sits under antifuse-based FPGAs -> FPGAs -> programmable logic ICs -> digital semiconductors. Antifuse programming is non-volatile and one-time, giving the SX family inherent design security and instant power-up with no configuration PROM. Key features include the sea-of-modules architecture that simplifies timing-driven design, 320 MHz internal performance capability on faster speed grades, pin-to-pin propagation delays as low as 3.7 ns clock-to-out, 0.1 ns input set-up, and only 0.25 ns clock skew - sufficient to integrate a 66 MHz PCI interface together with glue logic in a single chip at 100% resource utilization with full pin locking. Architecturally, the A54SX16P uses a sea-of-modules fabric of C-cells and S-modules that yields predictable, routing-independent timing. The 'P' suffix family supports 3.3V core operation with 5.0V-tolerant inputs, easing mixed-voltage system integration and legacy 5V bus interfacing. The -1 speed grade balances performance with lower static power versus -2 parts. Typical applications include industrial automation controllers, PCI bus interfacing, communications and wireless infrastructure, test and measurement equipment, and military/aerospace subsystems where one-time-programmable antifuse security matters. Design consideration: verify timing closure in Libero SoC at worst-case -1 grade conditions rather than typical, since antifuse devices cannot be reprogrammed if speed grades are marginal in-system. This page adds distributor sourcing data, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet.
A54SX16P-1PQG208I - 24K Gate SX FPGA, 208-PQFP | Microchip
The Microchip Technology A54SX16P-1PQG208I (originally Actel) is an SX-family antifuse FPGA with 24,000 system gates (16,000 equivalent gates), 175 user I/O, and up to 320 MHz internal performance, housed in a 208-pin PQFP (BFQFP) package. The -1 speed grade and I suffix denote an industrial temperature rating of -40C to +85C. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing a fabric of configurable logic blocks (CLBs) and programmable interconnects that engineers configure in the field to implement custom digital logic. Within the programmable logic hierarchy, the device sits as FPGA -> programmable logic device -> digital IC, occupying the mid-density slot of the SX family below the SX32 and above the SX08. Key features include a sea-of-modules architecture enabling 100% resource utilization with 100% pin locking, 3.7 ns pin-to-pin clock-to-out, 0.1 ns input setup time, and 0.25 ns clock skew. The device supports 66 MHz PCI single-chip integration and operates from a 3.3V supply with 5.0V-tolerant I/O (P version), simplifying interfacing with legacy 5V logic. Technically, the antifuse programming technology is one-time programmable (OTP): configuration is permanent, power-on instant, and inherently resistant to configuration bit-stream corruption - a major reliability advantage over SRAM FPGAs in harsh environments, at the cost of no re-programmability. The sister A54SX16P-P1PQG208I variant is documented with 1452 CLBs, 3.0V to 3.6V supply, and 0.8 ns combinatorial CLB delay. Typical applications include glueless PCI bus interfaces, industrial control and automation logic, aerospace/defense trusted logic (antifuse), communications line cards, and migration of multi-chip CPLD/gate-array designs into a single chip. Design consideration: because the part is OTP, fully verify your design in simulation before committing hardware; pin locking is guaranteed at full resource utilization, but there is no design-change latitude after programming. This page synthesizes distributor availability data, drop-in same-family alternatives, and EOL status notices not consolidated in the manufacturer datasheet.
A54SX16P-1PQG208M - SX FPGA 24K Gates 208-PQFP | Microchip
The Microchip Technology (formerly Actel/Microsemi) A54SX16P-1PQG208M is an SX-family antifuse FPGA providing 24,000 system gates (16K gates, 924 logic cells) with 175 user I/O, up to 320 MHz internal performance, and a 3.3V core with 5V-tolerant inputs, housed in a 208-pin PQFP (BFQFP) surface-mount package delivered in tape-and-reel format. A field-programmable gate array (FPGA) is a semiconductor device containing a fabric of configurable logic blocks and interconnects that designers program to implement custom digital circuits. Within the programmable logic hierarchy, the FPGA sits above CPLDs in gate density and below ASSPs in integration; the SX family uses Actel's patented antifuse technology, which is one-time programmable (OTP) rather than SRAM-based, so the configuration is non-volatile, inherently secure, and immune to configuration readback or radiation-induced configuration upsets. Key differentiating features of the A54SX16P include 3.7 ns pin-to-pin clock-to-out, 0.1 ns input setup time, and 0.25 ns clock skew, enabling full 66 MHz PCI single-chip solutions with 100% resource utilization and 100% pin locking. The 'P' suffix denotes the enhanced-performance speed grade family with 5V-tolerant I/O. Architecturally, the SX family's sea-of-modules structure combines C-cells (combinational) and R-cells (sequential/register) in a fine-grained cluster, routed by an antifuse interconnect matrix. This fine-grained architecture simplifies timing closure because routing delays are short and predictable, and it supports dramatic power and cost reductions for performance-intensive applications compared with coarse-grained alternatives. Typical applications include glue logic consolidation and CPLD/FPGA single-chip integration, 66 MHz PCI interface bridging, industrial control and instrumentation, military/aerospace legacy designs requiring non-volatile OTP fabric, and communications line cards where configuration security matters. Design consideration: antifuse FPGAs are one-time programmable - verify your design thoroughly in simulation before programming parts, and budget for spare programmed devices since a design change requires a new device. This page synthesizes distributor pricing, drop-in same-package alternatives, design notes, and comparison data not found in the manufacturer datasheet, as of 2026-09-03.
A54SX16P-1TQG144 - SX FPGA 16K Gates 144-TQFP | Microsemi
The Microsemi (now Microchip Technology) A54SX16P-1TQG144 is a 16,000-gate SX-family field-programmable gate array (FPGA) with 924 logic cells, a system toggle rate of up to 280 MHz, and 113 user I/O pins, housed in a 144-pin TQFP (20x20 mm) surface-mount package. It operates from dual supply rails of 3V to 3.6V and 4.75V to 5.25V (3.3V/5V), and the -1 speed grade is rated for commercial temperatures of 0C to +70C. An FPGA (field-programmable gate array) is a semiconductor device containing programmable logic blocks and interconnects that the designer configures after manufacturing. FPGAs sit within the broader hierarchy of programmable logic devices, above CPLDs and below full-custom ASICs in gate density, and are used to implement glue logic, state machines, bus interfaces, and control datapaths without committing to a mask-set. The SX family uses a sea-of-modules architecture that simplifies design capture and reduces power consumption compared with coarser-grained architectures. Key features of the A54SX16P include a 0.35 um process technology, antifuse-based one-time programmable configuration that retains programming through power cycles, dual 3.3V/5V operation enabling direct 5V-tolerant legacy interfacing, and up to 280 MHz internal toggle frequency for performance-intensive applications. The P suffix denotes the 5V-compatible variant of the SX family, making it a strong fit for designs that mix modern 3.3V logic with legacy 5V systems. Architecturally, the device implements logic in Logic Array Blocks (LABs) with 1,452 modules on the 24,000-system-gate die, interconnected through a segmented routing fabric. Because configuration is antifuse-based, there is no need for an external configuration ROM or boot sequence, improving board-level reliability and startup behavior versus SRAM FPGAs. Typical applications include industrial control and automation, 5V-tolerant legacy board redesigns, communication interface bridging, military/aerospace ground equipment, and test instrumentation glue logic. The 144-TQFP package suits medium-density, hand-assembly-friendly boards with 0.5 mm lead pitch. Design consideration: dual-rail power sequencing and 5V I/O bank assignment must be planned early, and antifuse programming is irreversible - verify the netlist in simulation before programming. This page synthesizes distributor availability data, drop-in same-package alternatives, and practical design notes not consolidated in the manufacturer datasheet.
A54SX16P-1TQG144I - SX FPGA 16K Gates 113 I/O | Microsemi
The Microsemi (Microchip) A54SX16P-1TQG144I is an SX-family field programmable gate array (FPGA) delivering 16,000 usable gates with 924 logic modules, 113 user I/O pins, and system performance up to 280 MHz, housed in a 144-pin TQFP (20x20 mm) package. An FPGA (Field Programmable Gate Array) is a semiconductor device containing a fabric of programmable logic blocks and interconnects that designers configure in the field, sitting within the broader programmable logic hierarchy alongside CPLDs and structured ASICs. The Actel SX family pioneered a sea-of-modules architecture in 0.35 um technology, an antifuse-based approach that preserves configuration through power cycles without an external boot PROM, unlike SRAM FPGAs from Xilinx or Altera. Key features of the A54SX16P include dual-rail operation supporting 3.3V (3.0V to 3.6V) and 5.0V (4.75V to 5.25V) supply domains, the 5V-tolerant 'P' variant option for mixed-voltage legacy systems, and a deterministic antifuse fabric that delivers ASIC-like routing delays with no configuration time at power-up. Technically, the device implements a fine-grained sea-of-modules architecture built on Actel's patented antifuse programmable interconnect. Each logic module is small and fast, enabling high toggle rates and predictable timing; the -1 speed grade supports clock rates to 280 MHz. The antifuse fabric adds very low dynamic power and inherent resistance to configuration upset, which historically made SX devices popular in industrial control and aerospace-adjacent designs. Typical applications include industrial automation and motor control glue logic, 5V-tolerant legacy board redesigns, bridge and interface logic between processors and peripherals, and high-reliability control systems where instant-on configuration matters. The 113 I/O pins accommodate wide parallel buses common in these domains. Designers should note that antifuse devices are one-time programmable: the design cannot be re-flashed after programming, so thorough simulation in Libero/Microsemi tooling before programming is essential. Supply sequencing between the 3.3V core domain and any 5.0V I/O domain should follow the datasheet power-up guidelines. This page synthesizes distributor availability data, drop-in speed-grade alternatives, and practical design notes not found in the manufacturer datasheet, with pricing stated as of 2026-09-03.
A54SX16P-1TQG176 - 24K Gate SX FPGA 147 I/O TQFP-176 | Microchip
The Microchip Technology (Microsemi) A54SX16P-1TQG176 is a 24K-system-gate SX-family FPGA with 1452 logic cells (924 cells), 147 user I/O, a maximum clock frequency of 280 MHz, and 0.35 um CMOS process technology, housed in a 176-pin TQFP (LQFP) surface-mount package. The lead-free 'G' suffix in the part number denotes RoHS-friendly Pb-free assembly. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing a fabric of configurable logic blocks and programmable interconnects that the designer programs after manufacturing, sitting between fixed-function ASICs and microprocessors in the programmable-logic hierarchy. FPGAs allow hardware-level parallelism and design iteration without fabrication costs, making them ideal for glue logic, protocol bridging, and control-plane functions. The SX family from Microsemi (now Microchip) uses a sea-of-modules architecture that simplifies design capture, reduces cost and power, and shortens time to market for performance-intensive applications. Key features of the A54SX16P include the 'P' enhanced-speed process option delivering up to 280 MHz toggle performance, dual 3.3V and 5V supply capability supporting 5V-tolerant legacy I/O systems, 1452 logic cells of usable capacity, and 147 user I/O pins in the compact 24 x 24 mm TQFP-176 footprint. The -1 speed grade denotes the standard-speed commercial bin; the -2 grade offers a higher 320 MHz maximum frequency for the same die. Technically, the SX sea-of-modules fabric organizes logic into compact modules with dedicated fast carry chains and local routing, achieving deterministic timing close to that of one-time-programmable antifuse architectures while retaining SRAM-like reprogrammability for prototyping workflows. Design entry is supported by Microchip Libero SoC design suite, which performs synthesis, place-and-route, and timing analysis against the -1 speed grade library. Typical applications include industrial control and motor-interface glue logic, legacy 5V system bridging and bus interfacing, telecommunications line-card control logic, and military/aerospace support electronics where the SX family's proven reliability is valued. A key design consideration: at 3.3V/5V dual-supply operation, ensure power-rail sequencing and check I/O standards supported per bank before finalizing pin assignment in Libero, since TQFP-176 pin re-assignment after layout is costly. This page synthesizes distributor inventory data, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.
A54SX16P-1TQG176I - 16K Gate SX FPGA, 280MHz, TQFP-176 | Microchip
The Microchip Technology (Microsemi) A54SX16P-1TQG176I is a CMOS field programmable gate array (FPGA) from the SX family offering 16,000 equivalent system gates, 924 logic cells, 1452 configurable logic blocks (CLBs), and 147 user I/O pins, with a maximum clock frequency of 280 MHz in a 176-pin TQFP (24x24 mm) surface-mount package. An FPGA (field-programmable gate array) is a semiconductor device containing a fabric of programmable logic blocks and interconnects that designers configure in the field to implement custom digital circuits. Within the product hierarchy, the SX family sits under antifuse-based FPGAs, which themselves belong to the broader class of programmable logic devices (PLDs) alongside CPLDs and ASICs. The SX family uses a sea-of-modules architecture that simplifies design, reduces power consumption, and shortens time to market for performance-intensive applications. Key features of this device include the 0.35 um CMOS process technology, a 3.3V nominal supply voltage (3.0V to 3.6V operating range) with 5V-tolerant operation, the -1 industrial speed grade, and an industrial operating temperature range indicated by the I suffix, making it suitable for harsh-environment deployments. Technically, the A54SX16P delivers high-speed combinational and registered logic in a deterministic antifuse architecture, which provides fixed, known interconnect delays after programming - an advantage over SRAM FPGAs for timing-critical designs. Antifuse programming is also non-volatile and inherently more resistant to configuration upsets than SRAM-based fabrics. Typical applications include industrial control and automation, telecommunications and datacommunications line cards, aerospace and defense subsystems, test equipment glue logic, and bus bridging where 280 MHz registered performance and 147 flexible I/O are required. Design consideration: the antifuse fabric is one-time programmable - verify your design thoroughly in simulation and with engineering silicon before committing to production programming, and budget supply voltage decoupling for the 3.3V rail. This page synthesizes distributor availability, drop-in same-package family alternatives, pricing tiers, and practical design notes not found in the manufacturer datasheet, providing engineers with a single citable reference for the A54SX16P-1TQG176I.
A54SX16P-1VQG100 - 16K Gate FPGA 280MHz 100-VQFP | Microchip
The Microchip Technology (Microsemi/Actel) A54SX16P-1VQG100 is a 16,000-gate antifuse CMOS field-programmable gate array (FPGA) from the SX family, delivering up to 280 MHz system performance with 81 user I/Os in a 100-pin VQFP (VQG100) surface-mount package operating at 3.3V or 5V. An FPGA is a programmable logic device whose interconnect and logic functions are configured by the designer rather than fixed at silicon fabrication. Within the programmable logic hierarchy (FPGA -> programmable logic device -> digital IC -> semiconductor), the SX family is distinctive because it uses antifuse one-time-programmable (OTP) technology instead of SRAM configuration. A sea-of-modules architecture provides dedicated routing resources that yield deterministic, ASIC-like timing with no configuration-loading time at power-up. Key features include approximately 16,000 system gates organized in 1452 configurable logic blocks (924 logic cells per distributor listings), a maximum toggle-rate-backed clock frequency of 280 MHz for the -1 speed grade, and 0.35 um CMOS process technology. The dual 3.3V/5V supply support simplifies integration into legacy 5V industrial systems, while antifuse programming gives inherent resistance to configuration readback and radiation-induced configuration upset compared with SRAM FPGAs. Architecturally, the sea-of-modules structure means logic and routing scale together, so performance does not degrade as utilization rises - a common weakness of channel-routed SRAM FPGA architectures. Combined with OTP security, this makes SX devices a long-standing choice in aerospace, defense, and industrial control designs. Typical applications include industrial automation and motor control glue logic, communications protocol bridging, aerospace/defense control functions, and migration of obsolete ASIC or gate-array designs where a one-time-programmed, non-volatile solution is preferred. Design consideration: because the device is one-time programmable, thoroughly complete place-and-route and functional simulation before programming; verify supply sequencing between the 3.3V core/IO domains on the 100-pin VQFP package. This page synthesizes distributor pricing tiers, same-package drop-in speed/temperature grade alternatives, and practical design notes not consolidated in the manufacturer datasheet. Pricing shown as of 2026-09-03.
A54SX16P-1VQG100I - 16K Gate FPGA, 280MHz, VQFP-100 | Microsemi
The Microsemi (now Microchip Technology) A54SX16P-1VQG100I is a CMOS antifuse FPGA from the Actel SX family, delivering 16,000 equivalent system gates and 924 logic cells in a 100-pin VQFP (TQFP-100) surface-mount package with 81 user I/O. It operates at a maximum clock frequency of 280 MHz, supports 3.3V and 5V I/O operation, and is rated for the industrial temperature range of -40C to +85C, indicated by the I grade suffix. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing configurable logic blocks (CLBs) and programmable interconnects that the designer wires together after manufacturing. Within the programmable logic hierarchy - FPGA -> programmable logic device -> digital IC -> semiconductor - the Actel SX family is distinctive for its sea-of-modules architecture built on a one-time-programmable antifuse fabric, which means the configuration is retained permanently at power-up with no external configuration PROM required. Key features include the 0.35 um CMOS antifuse process technology, a maximum toggle rate of 280 MHz suited to performance-intensive designs, and dual 3.3V/5V I/O voltage support that simplifies integration into legacy 5V industrial systems. The -1 speed grade defines the timing derating for this ordering code, while the P suffix in the SX16P variant denotes the enhanced process option of the SX family. Architecturally, the sea-of-modules structure eliminates the segmented routing delays typical of SRAM FPGA architectures, yielding deterministic, short interconnect delays that make timing closure predictable. With 1,452 modules of logic capacity, designers can integrate glue logic, state machines, bus interfaces, and high-speed control functions that would otherwise require multiple discrete devices, reducing board area, BOM cost, and power consumption. Typical applications include industrial automation and motor control interfaces, aerospace and defense subsystem logic, communications bridge logic, and obsolescence-management redesigns where a one-time-programmable, instant-on FPGA is preferred over SRAM-based devices. The 5V-tolerant I/O capability makes it particularly attractive for retrofit into existing 5V backplane systems. A key design consideration: antifuse FPGAs are one-time programmable, so functional changes require a new device - verify your design thoroughly in simulation and, where possible, using the same family in a larger package before committing to production programming. This page synthesizes verified distributor pricing, drop-in family alternatives, engineering design notes, and lifecycle context not consolidated in the manufacturer datasheet.
A54SX16P-1VQG100M - 16K Gate FPGA, 100-TQFP | Microchip
The Microchip Technology (Microsemi) A54SX16P-1VQG100M is a 16,000-gate Actel SX-family antifuse FPGA with 924 logic cells, 81 user I/O, and a maximum toggle/clock performance of 240 MHz, housed in a 100-pin VQFP (TQFP) surface-mount package. The -1 speed grade and -M military-grade temperature suffix mark this device for extended-temperature, high-reliability applications such as defense and aerospace systems. An FPGA (Field-Programmable Gate Array) is a semiconductor device that implements custom digital logic through programmable interconnect and logic blocks. Within the programmable-logic hierarchy, the SX family sits in the one-time-programmable (OTP) antifuse category, a lineage that runs FPGA -> antifuse FPGA -> programmable logic IC -> semiconductor. Unlike SRAM-based FPGAs, antifuse devices retain their configuration permanently and are immune to configuration-bitstream upset, which is a key reason they persist in radiation- and security-sensitive programs. Key features of the A54SX16P include the sea-of-modules architecture that Microsemi credits with simplifying design time and reducing power consumption, mixed 3.3 V and 5 V supply operation for legacy-interface compatibility, and 0.35 um CMOS technology with a two-dimensional flexible routing structure. The 81 available I/O support mixed-voltage interfacing in a compact 100-lead body with 0.5 mm lead pitch. Technically, the device provides 1452 CLB-equivalent modules mapped to roughly 16,000 system gates and 924 usable cells. The -1 speed grade supports clock rates up to the 240 MHz class documented for the family, adequate for glue logic, bus bridging, and control-path designs. The antifuse fabric means the design is programmed once via Actel/Microchip programming hardware and cannot be reconfigured in-system. Typical applications include military avionics and ground-system control logic, secure industrial controllers, bridge and bus-interface logic between 5 V legacy systems and 3.3 V subsystems, and replacements for obsolete ASIC or PAL/GAL glue logic in long-lifecycle programs. Design consideration: antifuse FPGAs are one-time programmable, so functional verification and programming-yield planning are essential before committing hardware; design changes require new devices. This page synthesizes distributor stock data, drop-in family alternatives, and practical design notes not consolidated in the manufacturer datasheet.
A54SX16P-2PQG208 - SX FPGA 24K Gates 175 I/O | Microchip
The Microchip Technology A54SX16P-2PQG208 is an SX-family field programmable gate array (FPGA) with 24,000 system gates, 175 user I/O, and up to 320 MHz system performance, housed in a 208-pin BFQFP/PQFP package with 0.50 mm terminal pitch (28 x 28 x 3.4 mm body). An FPGA (field programmable gate array) is a semiconductor device containing a fabric of configurable logic blocks (CLBs) and programmable interconnects that the designer programs after manufacturing. FPGAs sit within the broader hierarchy of programmable logic devices (PLDs), above CPLDs and SPLDs in density, and are used to implement custom digital logic without the cost and lead time of an ASIC. Key features of the A54SX16P-2PQG208 include its sea-of-modules architecture, which delivers performance and integration levels that Actel (now Microchip) stated were unmatched by other FPGA architectures at launch, 1452 configurable logic modules, and a CMOS process for low power consumption. The -2 speed grade supports clock frequencies up to 320 MHz, making the device suitable for performance-intensive glueless logic integration. Technically, the SX family uses a sea-of-modules architecture rather than the traditional island-style LUT fabric. Each module is a compact logic element that can implement combinatorial or sequential functions with predictable routing delays, simplifying timing closure. The 'P' suffix denotes the standard commercial temperature/processing variant; the '2' is the speed grade; and PQG208 identifies the 208-lead quad flatpack. Typical applications include industrial control and automation, telecommunications and networking line-card logic, high-speed bus bridging, test and measurement instrumentation, and military/aerospace system logic where one-time-programmable antifuse-style reliability and low power were historically valued. When designing with this device, verify the 208-pin PQFP thermal and electrical constraints, use proper decoupling on all VCC/VPP pins, and note that the design is programmed via the Actel/Microchip Libero design flow. Because PQFP lead pitch is 0.50 mm, careful PCB land-pattern control is required. This page synthesizes distributor pricing, drop-in same-family alternatives, design notes, and FAQ content not found in a single manufacturer datasheet page.
A54SX16P-2PQG208I - 24K-Gate SX FPGA 208-PQFP | Microchip
The Microchip Technology (Microsemi/Actel) A54SX16P-2PQG208I is a 24,000-system-gate SX family FPGA with 16,000 equivalent gates, 1452 Logic Array Blocks, 175 user I/O, a maximum clock frequency of 320 MHz, and combinatorial delays down to 0.7 ns, housed in a 208-pin plastic quad flat pack (PQFP/BFQFP) with a 0.50 mm terminal pitch. A field-programmable gate array (FPGA) is a semiconductor device containing a fabric of configurable logic blocks and programmable interconnects that the designer wires together post-manufacture. Within the programmable logic hierarchy, the device sits at: logic module -> Logic Array Block (LAB) -> sea-of-modules FPGA fabric -> programmable logic IC. FPGAs replace fixed-function ASICs and ASSPs where flexibility, low NRE cost, and fast time to market matter. Key features of the A54SX16P-2PQG208I include the SX sea-of-modules architecture that simplifies design capture, antifuse-style one-time-programmable configuration for high design security and no configuration-loading time, dual voltage rail operation from 3.0 V to 3.6 V, and industrial temperature range operation (-40C, the I suffix). The -2 speed grade delivers the fastest timing drive strength within the family. Technically, the device is a CMOS FPGA in the A54SX16 series. The 1452 LABs provide usable capacity for glue logic, bus interfacing, state machines, and moderate datapath functions. With a 0.7 ns combinatorial delay and 320 MHz clocking capability, the fabric supports demanding synchronous designs typical of industrial control and communications equipment. Typical applications include industrial control systems, cloud-computing and server infrastructure boards, communications and networking line cards, and test equipment, where the 175 user I/O accommodate wide parallel buses and multiple interface standards. A key design consideration is that SX family devices are one-time-programmable: prototype thoroughly in simulation, and reserve a spare socket footprint or board respin path, because bitstream revision cycles like SRAM FPGAs are not possible. This page synthesizes distributor stock data, same-family drop-in options, and practical design notes not consolidated in the manufacturer datasheet. Pricing shown is an estimate pending live distributor confirmation as of 2026-09-03.
A54SX16P-2TQG144 - 24K Gate SX FPGA, 113 I/O | Microsemi
The Microsemi A54SX16P-2TQG144 is an SX-family Field Programmable Gate Array (FPGA) offering 24,000 system gates (16,000 typical gates with 924 logic cells) and 113 user I/O pins in a 144-pin LQFP (TQFP, 20x20 mm) surface-mount package. It operates from dual supply rails of 3V to 3.6V (core) and 4.75V to 5.25V (I/O) and supports system speeds up to 320 MHz on 0.35 um CMOS process technology, with the speed grade '-2' denoting the faster commercial timing bin. An FPGA (Field Programmable Gate Array) is a semiconductor device containing a fabric of configurable logic blocks (CLBs), programmable interconnect, and user-programmable I/O that designers configure after manufacturing. Within the programmable logic hierarchy, the SX family sits among antifuse-based, high-speed, one-time-programmable FPGAs positioned above simple CPLDs and below large scale-of-integration families such as RTAX, making it suited for performance-intensive glueless logic integration. Key features include the sea-of-modules architecture that simplifies timing-driven design, dual 3.3V/5V supply operation for interfacing with 5V legacy systems, and deterministic antifuse interconnect that delivers predictable routing delays - a significant advantage over SRAM FPGAs where routing delay varies with placement. The 113 available user I/O within the 144-pin TQFP provides a strong I/O-to-logic ratio for bus-intensive designs. Technically, the SX family uses a 0.35 um antifuse CMOS process whose proprietary metal-to-metal antifuse elements are programmed once at power-up configuration, making the device non-volatile, secure against readback, and immune to configuration-bit upsets - attributes valued in industrial and defense-adjacent systems. Typical applications include industrial control and automation logic, telecommunications line-card glue logic, 5V-tolerant bus bridging, test and measurement instrumentation, and obsolescence-driven redesigns replacing multiple TTL/PLD devices. When designing with this device, verify that the 5.25V maximum I/O rail tolerance and one-time-programmable (OTP) workflow fit your production model, since design changes require new devices rather than reconfiguration. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet.
A54SX16P-2TQG144I - SX FPGA 16K Gates 113 I/O | Microsemi
The Microsemi (now Microchip Technology) A54SX16P-2TQG144I is an SX-family Field Programmable Gate Array (FPGA) with up to 24,000 system gates, 113 programmable I/O pins, and up to 320 MHz toggle performance, housed in a 144-pin TQFP (20x20 mm) package. The -2 speed grade and industrial (-I) temperature rating make it suited for harsh-environment embedded logic. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing configurable logic blocks and programmable interconnects that the designer wires together after manufacturing. Within the programmable logic hierarchy, the device sits as FPGA -> programmable logic IC -> logic IC -> digital semiconductor. Unlike flash- or SRAM-based FPGAs, the Actel SX family uses antifuse programming technology, which is one-time programmable (OTP) and retains its configuration permanently, making it inherently resistant to configuration corruption from radiation or power glitches. Key features of the A54SX16P-2TQG144I include a sea-of-modules architecture delivering high gate utilization and fast interconnect, dual supply operation with a core/I-O split of 3.0V to 3.6V and 4.75V to 5.25V, and 5V-tolerant I/O compatibility valuable for legacy mixed-voltage systems. The 0.35 um process technology supports clock rates up to approximately 320 MHz for counter and register paths. The SX architecture uses a sea-of-modules fabric with C-cells (combinational) and R-cells (sequential) to provide deterministic, low-skew routing without the segmented interconnect delays of coarse-grained FPGAs, enabling predictable timing closure on first pass. Typical applications include industrial control logic, glue logic consolidation, aerospace and defense subsystems, telecommunications line cards, and legacy system re-engineering where 5V-tolerant I/O and OTP security matter. The industrial temperature range (-40C to +85C) suits factory automation and outdoor equipment. Design consideration: because antifuse FPGAs are one-time programmable, fully verify your design in simulation and on a companion device (the low-cost A54SX08 family) before programming production units. This page synthesizes distributor stock data, same-footprint alternatives, and practical design notes not found in the manufacturer datasheet.
A54SX16P-2TQG176 - 16K Gate SX FPGA 320MHz 147 I/O | Microchip
The Microchip Technology (Microsemi) A54SX16P-2TQG176 is an SX-family antifuse FPGA with 16,000 system gates (24K system gate density per Mouser listing), 147 user I/O, a maximum clock frequency of 320 MHz, and a 176-pin TQFP (LQFP-176) surface-mount package. An FPGA (Field-Programmable Gate Array) is a semiconductor device that implements configurable logic blocks (CLBs) interconnected by programmable routing, allowing designers to build custom digital circuits without fabricating an ASIC. Within the programmable logic hierarchy, the device sits as FPGA -> programmable logic IC -> logic IC -> digital semiconductor. The SX family uses a sea-of-modules architecture built on 0.35 um CMOS technology, a topology Microchip states delivers device performance and integration levels not achieved by other FPGA architectures of its generation. Key features include 1452 configurable logic modules, a dual 3.3V/5V supply architecture, and a -2 speed grade supporting toggle rates up to 320 MHz. The antifuse programming technology is non-volatile and radiation-tolerant by nature, providing instant-on operation with no configuration PROM and inherently higher resistance to configuration upset than SRAM-based FPGAs. Architecturally, the sea-of-modules structure shortens routing delays and enables deterministic timing, which is why the SX family targets performance-intensive applications such as bus bridging, state machines, and high-speed glue logic. The 5V-tolerant I/O structure of the P variant eases interfacing with legacy 5V systems. Typical applications include industrial automation control, telecommunications line cards, test and measurement boards, and legacy avionics or military system sustainment where 5V compatibility and instant-on logic are required. A key design consideration is that antifuse devices are one-time programmable: the design must be frozen before assembly, so budget for rework and socketed prototyping during development. This page synthesizes distributor availability data, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with pricing references as of 2026-09-03.
A54SX16P-2TQG176I - 16K Gate SX FPGA 320MHz TQFP-176 | Microchip
The Microchip Technology (Microsemi) A54SX16P-2TQG176I is an SX-family Field Programmable Gate Array (FPGA) offering 16,000 system gates (24K system gates per Mouser categorization), 924 logic cells, and a maximum toggle rate of 320 MHz, housed in a 176-pin TQFP (TQG176) surface-mount package with 147 user I/O pins. It operates from a 3.0V to 3.6V supply (3.3V nominal, 5V-tolerant I/O) and is rated for the industrial temperature range denoted by the I suffix. An FPGA is a reconfigurable semiconductor device whose logic function is defined at design time rather than fixed at fabrication. Within the digital logic hierarchy, the FPGA sits above fixed-function ASICs and ASSPs: it belongs to the programmable logic family, alongside CPLDs and programmable SoCs, and is a core building block of embedded system and power management architectures. Key features of the A54SX16P include the SX sea-of-modules architecture, which simplifies timing-driven design, reduces design cost and power consumption, and shortens time to market for performance-intensive applications. The device provides 1452 LABs/CLBs of configurable logic, 0.35 um CMOS process technology, and speed grade -2, balancing performance and cost. The P-suffix variant supports antifuse-based one-time programmability, delivering design security and radiation-tolerant behavior valued in industrial and aerospace-derived systems. Technically, the SX family uses a sea-of-modules structure with dedicated registers and carry logic for arithmetic, achieving predictable interconnect delays. The 320 MHz maximum clock frequency and 147 programmable I/O make it suitable for glue logic consolidation, bus interfacing, protocol bridging, and control state machines in embedded systems. Industrial-grade (I) temperature rating supports extended-environment deployments. Typical applications include industrial automation control, communications and networking interface bridging, and military/aerospace-derived or high-reliability industrial systems where one-time-programmable antifuse security matters. A key design consideration: antifuse FPGAs are one-time programmable, so designers must fully validate the bitstream before programming production units, and Libero SoC design software from Microchip is required for synthesis and place-and-route. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.
A54SX16P-2VQG100I - 16K Gate SX FPGA, 320MHz, TQFP-100 | Microsemi
The Microsemi (Actel, now Microchip Technology) A54SX16P-2VQG100I is a 16,000-gate antifuse field-programmable gate array (FPGA) from the SX family, with 924 logic modules, up to 81 user I/O, a -2 speed grade supporting system clock rates up to 320 MHz, packaged in a 100-pin VQFP/TQFP surface-mount enclosure and rated for the industrial temperature range (-40C to +85C). An antifuse FPGA is a type of one-time-programmable (OTP) field-programmable gate array in which programmable interconnect elements are formed by amorphous silicon antifuse links. Unlike SRAM-based FPGAs, an antifuse device retains its configuration permanently with no external boot flash, no configuration time at power-up, and inherent resistance to readout - making the family a hierarchy ancestor of modern one-time-programmable, security-focused programmable logic within the broader power-management and logic-IC ecosystem. Key features include the 0.35 um CMOS sea-of-modules architecture, dual 3.3V/5V I/O compatibility for mixed-voltage board designs, and 1452 configurable logic building blocks organized for high routing efficiency. The SX family delivers ASIC-like gate utilization and deterministic timing that simplify design closure in performance-intensive applications. Technical depth: the SX sea-of-modules architecture replaces the channel routing of conventional FPGAs with a dense sea of C-cells (combinational) and S-cells (sequential), giving short, predictable interconnect delays. The -2 speed grade in the VQG100 package supports a 320 MHz maximum toggle/system clock rate, and the antifuse interconnect adds negligible parasitic capacitance compared with pass-transistor-based SRAM routing, which is the primary source of the family's speed advantage. Typical applications include glue-logic consolidation and ASIC prototype reduction in industrial control, high-speed bus bridging and interface translation in communications equipment, and secure, instant-on control logic in avionics-adjacent and defense-adjacent industrial systems where non-volatile, configuration-readout-resistant logic is preferred. Design consideration: because the device is one-time-programmable, verify the design exhaustively in simulation and - where possible - in a lower-cost equivalent package before committing programming; there is no field re-work path. This page synthesizes distributor sourcing data, same-family drop-in speed-grade and temperature-range alternatives, and practical design notes not found in the manufacturer datasheet.
A54SX16P-PQ208I - 24K Gate SX FPGA, 175 I/O, PQ208 | Microchip
The Microchip Technology A54SX16P-PQ208I is an SX-family Field Programmable Gate Array (FPGA) with 24,000 system gates (16,000 typical usable per series literature, 24,000 gates per distributor listings), 1,452 configurable logic blocks (CLBs), 175 user I/O pins, and 320 MHz internal performance, housed in a 208-pin fine-pitch QFP (208-BFQFP / 208-PQFP, 28x28 mm, 0.5 mm terminal pitch) package. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing a fabric of programmable logic blocks and interconnects that the designer configures after manufacturing. Within the hierarchy of programmable logic, the SX family sits as a high-performance, antifuse-based FPGA beneath larger families such as Microchip (Actel) ProASIC and RTAX, and complements CPLDs where higher gate counts and registered performance are needed. Key features of the A54SX16P include 320 MHz internal performance, 3.7 ns pin-to-pin clock-to-out, 0.1 ns input setup time, and 0.25 ns clock skew - specifications that enabled single-chip 66 MHz PCI integration. The P-suffix variant supports 3.3 V core operation with 5.0 V-tolerant inputs, simplifying mixed-voltage board designs. The sea-of-modules architecture achieves 100% resource utilization with 100% pin locking, reducing design iterations. Technically, the SX family uses a sea-of-modules architecture that simplifies timing closure and enables deterministic routing. The dual supply support (3V to 3.6V core and 4.75V to 5.25V I/O domains on P variants) bridges legacy 5V systems with 3.3V logic. The antifuse-based programming retains configuration through power cycles without an external configuration device. Typical applications include 66 MHz PCI bus interfaces, industrial control backplanes, telecommunications line cards, and legacy military/aerospace designs requiring 5V-tolerant I/O. The industrial temperature grade (I suffix, -40C to +85C TA) suits harsh environments. Design consideration: as this part is a mature/legacy device, verify current supply availability and consider design migration planning; the antifuse fabric is one-time-programmable, so plan in-system retest strategy accordingly. This page synthesizes distributor pricing and availability data, drop-in same-package alternatives, and practical design notes not consolidated in the manufacturer datasheet.
A54SX16P-PQG208 - 16K Gate SX FPGA 240MHz PQFP-208 | Microchip
The Microchip Technology (Actel) A54SX16P-PQG208 is a 16,000-gate (24K system gates) SX-family antifuse FPGA built on 0.35 um CMOS process, delivering a maximum system clock frequency of 240 MHz and 175 user I/O in a 208-terminal Plastic Quad Flatpack (PQFP) package with 0.5 mm terminal pitch. An FPGA (Field-Programmable Gate Array) is a type of programmable logic IC that allows designers to implement custom digital circuits after manufacturing. The SX family uses Actel's pioneering antifuse programmable interconnect, a one-time-programmable technology at the root of the FPGA taxonomy (FPGA -> programmable logic device -> digital IC). Antifuse devices retain their configuration permanently, are inherently resistant to configuration readback, and require no external configuration PROM, unlike SRAM-based FPGAs. Key features of the A54SX16P include Actel's sea-of-modules architecture with 1452 logic modules, dual-supply operation supporting 3.3V core/5V-tolerant I/O rails (3.0V-3.6V core, 4.75V-5.25V I/O), and deterministic pin-to-pin timing enabled by the segmented routing fabric. The device provides 924 logic cells and supports a maximum clock frequency of 240 MHz, making it suitable for performance-intensive glueless integration. The sea-of-modules architecture places C-cells (combinational) and R-cells (sequential) in a dense array with short, low-capacitance routing segments, giving the A54SX16P predictable delays and high gate utilization. This yields performance comparable to much larger SRAM FPGAs while consuming significantly less static power, since antifuse interconnect draws no static configuration current. Typical applications include industrial automation controllers, communication and networking interface logic, embedded system glue logic and bus bridging, aerospace/defense control logic (where nonvolatile one-time programming is valued), and test-and-measurement instrumentation. The 175 I/O count and dual voltage support make it a strong fit for legacy 5V and 3.3V mixed-rail board designs. When designing with the A54SX16P, note that antifuse programming is one-time only: functional changes require a new device, so design freezes and thorough simulation in Libero/Microchip design tools are essential. The 208-pin PQFP requires attention to signal-integrity practices for high-speed clock distribution. This page synthesizes distributor pricing, drop-in alternative MPNs across speed grades and temperature grades, and practical design notes not found in the manufacturer datasheet, providing procurement and engineering teams a single reference for sourcing decisions.
A54SX16P-PQG208I - SX FPGA 16K Gates 208-PQFP | Microchip
The Microchip Technology (Microsemi) A54SX16P-PQG208I is a member of the SX family of field programmable gate arrays (FPGAs) featuring 16,000 system gates, 924 logic cells, 175 user I/O, and internal performance up to 240 MHz, housed in a 208-pin PQFP (BFQFP) package with industrial temperature range support (-40C to +85C). An FPGA (field programmable gate array) is a reprogrammable semiconductor device that implements digital logic through a matrix of configurable logic blocks and programmable interconnects. Within the programmable logic hierarchy, the FPGA sits above SPLDs and CPLDs, offering higher gate counts and register-rich architectures suitable for glue logic integration, bus interfacing, and state-machine control in embedded systems. The SX family uses a sea-of-modules architecture built on a 0.35 um CMOS process. This register-dense fabric allows 100% resource utilization with 100% pin locking, simplifying timing closure and PCB design. The A54SX16P operates from a single 3.3V supply with 5V-tolerant I/O, easing integration into legacy 5V bus systems such as PCI-compliant designs. Technically, the device provides fast pin-to-clock performance with low clock skew, enabling single-chip integration of functions that previously required multiple CPLDs or ASSPs. The 'P' variant of the SX family offers enhanced I/O capabilities, and the PQG208 industrial-grade suffix (I) guarantees operation across -40C to +85C, critical for industrial and communications equipment exposed to wide ambient swings. Typical applications include industrial automation controllers, telecommunications line cards, test and measurement instrumentation, and military/aerospace legacy system sustainment, where the anti-fuse-class reliability of the SX architecture and 5V-tolerant I/O are decisive selection factors. A key design consideration: as an antifuse/one-time-programmable class FPGA family, the SX series is programmed at programming stations rather than reconfigured in-system, so design iteration requires new programmed devices. Verify programming file compatibility with your programmer before procurement. This page synthesizes distributor stock data, drop-in package-compatible variants, and practical design notes not found in the manufacturer datasheet, with pricing as of 2026-09-03.