PIC18LF2520T-I/SO
PIC18LF2520T-I/SO - 8-bit 32KB MCU, 40MHz, 28-SOIC | Microchip
The Microchip PIC18LF2520T-I/SO is a low-power 8-bit PIC18F-family microcontroller delivering 10 MIPS performance at 40 MHz, packaged in a 28-pin SOIC (SO) wide-body IC package. It integrates 32 KB of Flash program memory, 1536 bytes of SRAM, and 256 bytes of EEPROM, with 25 digital I/O pins and a 10-bit ADC for mixed-signal embedded designs. Operating from 2.0 V to 5.5 V (LF variant), the part supports wide supply flexibility for battery-powered, industrial, and consumer applications. The 'T' suffix denotes Tape-and-Reel packaging while '-I' indicates the industrial temperature range of -40 °C to +85 °C, and 'SO' specifies the 28-lead Small Outline IC package.
A PIC microcontroller is a Harvard-architecture RISC device that combines a CPU core, program memory, data memory, and a rich set of peripherals (timers, ADC, UART, SPI, I2C, PWM) on a single silicon die. PIC18 parts extend the baseline PIC16 architecture with 16-bit instructions, a wider data path, C-optimized instruction set, single-cycle hardware multiply, and enhanced peripherals such for motor control and USB. The PIC18LF2520 belongs to the enhanced Flash microcontroller family with 10-bit A/D and nanoWatt features, making it a workhorse for general-purpose embedded products.
Key features include an 8x8 single-cycle hardware multiplier, internal oscillator support from 31 kHz to 8 MHz, a Fail-Safe Clock Monitor that allows safe shutdown if the clock fails, and a separate Watchdog Timer with its own RC oscillator for maximum reliability. The 10-bit ADC provides up to 10 channels, while the nanoWatt power-management modes reduce quiescent current to microampere levels for sleep-mode battery life. Enhanced peripherals include ECAN-ready I/O, PWM modules for motor and lighting control, and dual analog comparators.
Architecture depth: the C-optimized RISC pipeline executes most instructions in one cycle, and the 32 KB linear Flash with self-programmability supports in-application firmware updates via the bootloader or runtime routines. The 1536-byte SRAM is shared with the hardware stack and general-purpose variables, while the 256-byte EEPROM offers non-volatile user data storage rated for 100 k erase/write cycles typical. The peripheral pin-select (PPS) and remappable I/O extend design flexibility across the 28-pin package.
Typical applications include industrial control (sensor interfacing, motor drives), low-power consumer devices (battery chargers, remote controls, HVAC thermostats), automotive body and aftermarket electronics, USB-to-UART bridges, and small appliances with user interface displays. The wide voltage range and nanoWatt modes make it a frequent choice for solar-powered, energy-harvesting, and remote IoT nodes where standby current is critical. The 28-SOIC footprint also simplifies hand-prototyping and wave-soldered production assemblies.
When designing with the PIC18LF2520T-I/SO, reserve the MCLR pin with its proper pull-up, use decoupling capacitors (100 nF plus 10 µF bulk) within a few millimetres of VDD/VSS pairs, and route the quartz crystal traces symmetrically with a guard ground to minimise EMI. Verify ADC accuracy by adding anti-alias filters on analog inputs and by keeping digital signals away from analog traces.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, enabling rapid part selection and sourcing for engineers evaluating 8-bit PIC18 alternatives.
Cotización
Contacto
