Microcontroladores

Productos (18756)

PIC24EP128GP202-H/SP - 16-bit 70 MIPS MCU, 128KB Flash | Microchip
PIC24EP128GP202-H/SP

PIC24EP128GP202-H/SP - 16-bit 70 MIPS MCU, 128KB Flash | Microchip

The Microchip Technology PIC24EP128GP202-H/SP is a 16-bit PIC microcontroller from the PIC24EP general-purpose MCU family, running at 70 MIPS core speed with 128 KB (43K x 24) of Flash program memory and AEC-Q100 automotive qualification, housed in a 28-pin SPDIP (0.300 inch, 7.62 mm) through-hole package. The -H temperature suffix denotes the high-temperature grade of -40C to +150C operation, distinguishing it from the -I (industrial -40C to +85C) and -E (extended -40C to +125C) siblings in the same family. A PIC microcontroller is a programmable embedded processor that integrates CPU, Flash, RAM, and peripherals on a single die, forming the lowest level of the embedded computing hierarchy: microcontroller -> embedded MCU -> digital signal controller -> semiconductor. The PIC24EP family uses a modified Harvard architecture with a 16-bit data path, 24-bit instruction width, and hardware DSP support for signal-processing tasks. It is a Digital Signal Controller (DSC) class device, bridging generic microcontrollers and dedicated DSPs. Key features of the PIC24EP128GP202 include up to 70 MIPS performance from a single 3.0V to 3.6V supply, internal operational amplifiers, a Charge Time Measurement Unit (CTMU) for capacitive touch and current measurement, a Peripheral Trigger Generator (PTG) for automating peripheral sequencing, and superior ADC performance aimed at high-end general-purpose applications. The on-chip op amps reduce external analog BOM in sensor-conditioning circuits. The architecture integrates a high-speed 70 MIPS core with multi-channel 10-bit/12-bit ADCs, PWM, I2C, SPI, UART, and enhanced timers. The combination of op amps + CTMU + PTG means a single chip can handle analog front-end conditioning, capacitive sensing, and timing-critical event sequencing without external glue logic. Typical applications include automotive body and powertrain subsystems, industrial motor control, white-goods inverters, UPS power-factor correction, multi-loop PID control loops, sensor conditioning with on-chip op amps, and capacitive-touch user interfaces. The wide temperature range also suits outdoor industrial and renewable-energy installations. When designing with this part, plan input clock options (HS, XT, EC, FRC) early because the 70 MIPS throughput depends on stable clocking; place decoupling caps within 5 mm of each VDD/VSS pair. For automotive designs, ensure the -H grade's 150C junction limit is respected at maximum ambient plus self-heating derating. This page synthesizes distributor pricing, AEC-Q100 cross-brand alternatives, and SPDIP 20-pin/28-pin drop-in guidance not found in any single distributor listing, providing engineers a single decision-ready reference for automotive-grade PIC24 MCU selection.

Cotización Contacto
PIC24EP128GP202-I/SO - 16-bit 70 MIPS 128KB Flash MCU | Microchip
PIC24EP128GP202-I/SO

PIC24EP128GP202-I/SO - 16-bit 70 MIPS 128KB Flash MCU | Microchip

The Microchip PIC24EP128GP202-I/SO is a 16-bit microcontroller from the PIC24E general-purpose family, delivering 70 MIPS core performance with 128 KB of Flash program memory and 16 KB of SRAM, housed in a 28-pin SOIC (300 mil) package. It combines high-speed DSP capability with rich on-chip analog peripherals including dual op-amps, a 12-bit ADC with 16 channels, four analog comparators, and a Charge Time Measurement Unit (CTMU), all operating from a single 3.0 V to 3.6 V supply. The core executes most instructions in one cycle, giving a 70 MHz FOSC equivalent throughput suitable for real-time control loops and digital signal processing. A 16-bit microcontroller (MCU) is a programmable processor with 16-bit data paths, registers, and ALU, offering higher code density and arithmetic precision than 8-bit MCUs while remaining easier to use than 32-bit parts. PIC24EP devices sit in the mid-range of Microchip's dsPIC/PIC24 portfolio and target applications where both deterministic control and DSP-class math (filtering, FFT, modulation) are required on a single chip, bridging the gap between simple 8-bit MCUs and more complex ARM Cortex-M parts. They are descendants of the Harvard-architecture PIC lineage and include DSP extensions for MAC operations. Key features include 21 general-purpose I/O pins, two UART modules, two SPI interfaces, two I2C interfaces, five 16-bit timers plus two 32-bit timers, a Peripheral Trigger Generator (PTG) for hardware sequencer applications, and high-speed PWM outputs. The CTMU enables touch sensing and precise time-of-flight measurements by combining a constant-current source with the ADC. Programming is supported via Microchip's MPLAB X IDE with the XC16 compiler and ICD/Real ICE debug tools. Typical applications include industrial sensor conditioning using the on-chip op-amps, motor control reference designs, digital power conversion with high-speed PWM, medical instrumentation signal chains, LED lighting control, and automotive body/comfort modules (the automotive-grade version is the PIC24EP128GP202-E/SO). The PTG combined with DMA enables sophisticated waveform generation without CPU intervention, useful in switched-mode power supplies and lighting ballasts. When designing with this device, ensure all VDD/VSS pairs are decoupled with 100 nF ceramics placed within 5 mm of the package pins, and respect the 3.0 V to 3.6 V supply window because PIC24EP devices do not include an internal regulator on the I/O supply rail. For new designs migrating from PIC24F, verify that the 28-SOIC pinout and ICSP programming pins match your debug adapter before reusing existing layouts. This page synthesizes distributor pricing, parametric drop-in alternatives, and engineering design notes for the PIC24EP128GP202-I/SO in the 28-pin SOIC package - content not consolidated on the manufacturer product page or standard distributor listings.

Cotización Contacto
PIC24EP128GP202T-E/MM - 16-bit 70 MIPS MCU, 128KB Flash, 28-QFN | Microchip
PIC24EP128GP202T-E/MM

PIC24EP128GP202T-E/MM - 16-bit 70 MIPS MCU, 128KB Flash, 28-QFN | Microchip

The Microchip Technology PIC24EP128GP202T-E/MM is a 16-bit PIC microcontroller from the PIC24EP family, featuring a high-performance 70 MIPS core, 128 KB of Flash program memory, and 16 KB of SRAM in a 28-pin VQFN (MM) package with exposed thermal pad. It is supplied in tape-and-reel packaging and is qualified to the AEC-Q100 automotive standard, making it suitable for automotive and industrial embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals such as timers, ADC, communication interfaces, and I/O ports. PIC24E devices belong to the 16-bit DSC (Digital Signal Controller) family, positioned in Microchip's portfolio between the 8-bit PIC16/PIC18 architectures and the 32-bit PIC32 families. PIC24E parts add DSP-grade MAC instructions, advanced analog peripherals, and higher clock rates than the PIC24F predecessors. Key features of the PIC24EP128GP202 include a 16-bit wide data path, 70 MIPS performance from a 70 MHz system clock, dual 10-bit/12-bit capable ADC channels, up to six 16-bit timers, peripheral trigger generator (PTG), op amps, and CTMU (Charge Time Measurement Unit) for capacitive touch and current measurement. AEC-Q100 qualification and the extended -40C to +125C operating range are explicit advantages of the E/MM temperature/grade suffix combination. The architecture combines a Harvard bus with on-chip 32x16 hardware multiply, providing deterministic execution needed for motor-control loops and real-time DSP filtering. The PIC24E instruction set adds DO and REPEAT hardware loops, MAC (multiply-accumulate) for DSP kernels, and bit-field instructions for efficient peripheral control. With 128 KB Flash (43K x 24 words) and 16 KB SRAM, the part targets mid-range firmware footprints typical in body electronics, sensor fusion, and audio processing. Typical applications include automotive body and comfort modules, sensor interface boards, motor control pre-drivers, low-cost digital power conversion, and industrial sensor hubs. The AEC-Q100 grade also extends use to under-hood and chassis ECUs when paired with proper external protection. When designing with this MCU, ensure a low-impedance ground return under the exposed pad to meet thermal and EMI expectations, and configure the alternate I/O mapping table early to avoid pin conflicts. Decoupling should follow Microchip's 100 nF per VDD + bulk 10 uF guidance. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, and should be read alongside the official Microchip PIC24EP128GP202 datasheet (DS70621 family).

Cotización Contacto
PIC24EP128GP202T-E/SS - 60 MIPS 16-bit MCU, 128KB Flash, SSOP-28 | Microchip
PIC24EP128GP202T-E/SS

PIC24EP128GP202T-E/SS - 60 MIPS 16-bit MCU, 128KB Flash, SSOP-28 | Microchip

The Microchip Technology PIC24EP128GP202T-E/SS is a 16-bit RISC microcontroller from the PIC24E general-purpose MCU family, integrating 128 KB (43K x 24) of Flash program memory and 8 KB of RAM, and supplied in a 28-pin SSOP package on tape-and-reel for automotive (AEC-Q100) applications. It is powered by a high-performance 70 MIPS (60 MIPs in the -E extended temperature grade) modified-Harvard core that pairs a 16-bit data path with DSP-oriented instructions, supporting deterministic real-time control and digital signal processing in a single device. The 28-SSOP footprint measures 5.30 mm wide, suiting compact PCB layouts where board area is constrained. What is a 16-bit MCU? A 16-bit microcontroller (MCU) is an embedded computing device whose central processing unit operates on 16-bit data words, a sweet spot for general-purpose control: wider registers and arithmetic units than 8-bit MCUs (more efficient at integer math, table lookups, and DSP kernels) but lower cost and power than 32-bit Cortex-M parts. The PIC24E family sits in the broader taxonomy 16-bit MCU -> dsPIC/PIC24 -> microcontroller -> embedded computing -> semiconductor. AEC-Q100 Grade 1 qualified variants such as this -E part are screened for -40C to +125C operation and automotive reliability stresses. Key features include a 10/12-bit ADC with up to 500 ksps conversion, three on-chip operational amplifiers, three comparators, a Charge Time Measurement Unit (CTMU) for capacitive touch and precise time measurement, two on-chip op amps, a Peripheral Trigger Generator (PTG) for chained timing sequences, and a 70 MIPS core for fast closed-loop control. A 4-channel DMA engine, multiple 16-bit timers, and PWM peripherals offload the CPU in motor, power, and lighting applications. Architecturally, the PIC24EP128GP202T-E/SS combines a 16-bit core with 24-bit instruction words, dual-bank Flash with self-programmability, ECC-protected program memory, and a peripheral set with hardware CRC. The -E suffix denotes the extended industrial temperature grade -40C to +125C and AEC-Q100 automotive qualification, making the part suitable for under-hood and safety-critical subsystems. Typical applications include automotive body and chassis ECUs, BLDC/PMSM motor control, industrial control and PLCs, LED lighting drivers, digital power conversion, and consumer appliance control. The on-chip op amps simplify current sensing in motor drives, and the CTMU enables capacitive touch user interfaces. When designing with this MCU, allocate the VDD/CORE pair correctly (3.0V-3.6V) and place decoupling capacitors within 5 mm of each supply pin. Use MPLAB X IDE with the XC16 compiler for development and program/debug via ICSP on PGECx/PGEDx. AEC-Q100 grade parts require factory-traceable lot records for end-of-line traceability. This page synthesizes distributor pricing, parametric comparison, AEC-Q100-grade drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with data anchored to Microchip's DS70621 PIC24E Family Reference Manual and live distributor listings as of 2026-09-29.

Cotización Contacto
PIC24EP128GP202T-I/MM - 16-bit 70 MIPS 128KB Flash MCU | Microchip
PIC24EP128GP202T-I/MM

PIC24EP128GP202T-I/MM - 16-bit 70 MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24EP128GP202T-I/MM is a 16-bit microcontroller from the PIC24EP general-purpose family, delivering up to 70 MIPS performance from a modified Harvard architecture core, packaged in a 28-pin QFN-S (6x6 mm) with exposed thermal pad. It integrates 128 KB of Flash program memory (43K x 24 words) and 8 KB of SRAM, supports 3.0V to 3.6V single-supply operation, and provides rich analog peripherals including a 10/12-bit ADC, operational amplifiers, a Charge Time Measurement Unit (CTMU), and a Peripheral Trigger Generator (PTG) for deterministic peripheral sequencing without CPU intervention. A 16-bit MCU is a microcontroller whose data path, registers, and ALU natively operate on 16-bit words, giving roughly an order-of-magnitude higher code density and arithmetic throughput than 8-bit cores at comparable clock rates. Within the broader taxonomy, the PIC24EP family sits above the PIC24F and PIC24H families, below the dsPIC33 DSC family, and is part of Microchip's PIC24 general-purpose 16-bit MCU line, which targets deterministic real-time control at low power. The 70 MIPS figure is derived from a 70 MHz maximum oscillator with a 2:1 instruction-cycle divider, so a single source line is executed per two clock cycles. Key differentiating features of the PIC24EP128GP202T-I/MM include up to 70 MIPS CPU throughput, dual op-amp front-ends for in-package analog conditioning, a CTMU for capacitive touch and precise time-of-flight measurement, the PTG for offloading trigger patterns from the CPU, and a Peripheral Pin Select (PPS) remappable I/O scheme that simplifies PCB routing. The device also integrates a 16-bit Parallel Master Port (PMP) option on select pins, multiple UART/SPI/I2C modules, hardware DMA, and a 16-bit timer/capture/PWM engine. The "-I" industrial temperature grade spans -40C to +85C and the "-MM" suffix denotes the 28-pin QFN-S 6x6 mm package. Architecture-wise, the PIC24EP core separates program and data buses (modified Harvard) and uses a 24-bit-wide instruction word, which is the reason Flash is sized at 43K x 24 rather than 128K x 8. The 70 MIPS throughput is achieved while keeping dynamic current low because peripheral trigger generation (PTG) and DMA remove many interrupt-driven CPU tasks that would otherwise consume MIPS budget. Typical applications include industrial motor control, switch-mode power supplies (digital PFC), sensor signal conditioning with on-chip op-amps, capacitive touch user interfaces (CTMU), building automation, medical instrumentation front-ends, and general-purpose embedded control in white goods. The wide operating voltage range and integrated analog make it well-suited to mixed-signal designs that would otherwise require a separate op-amp or touch IC. Compared with a discrete MCU + external op-amp + touch controller, the PIC24EP128GP202 reduces BOM count, board area, and BOM risk. When designing with this device, pay attention to the QFN-S exposed pad: it must be soldered to a sufficiently large copper pour to keep junction temperature within the -40C to +85C industrial range. Decoupling should follow the manufacturer's reference design with a 100 nF plus 10 uF bulk capacitor near each VDD/VSS pair. Forgetting to solder the EP is a common field failure mode for QFN-based PIC MCUs. The "T" in the part number indicates Tape and Reel packaging for high-volume assembly. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes that complement the Microchip datasheet rather than restating it.

Cotización Contacto
PIC24EP128GP202T-I/SS - 16-bit 70 MIPS MCU, 128KB Flash | Microchip
PIC24EP128GP202T-I/SS

PIC24EP128GP202T-I/SS - 16-bit 70 MIPS MCU, 128KB Flash | Microchip

The Microchip Technology PIC24EP128GP202T-I/SS is a high-performance 16-bit microcontroller from the PIC24EP "General Purpose" family, featuring the 70 MIPS dsPIC/PIC24E core, 128 KB of Flash program memory, 16 KB of SRAM, and 4 KB of EEPROM, all packaged in a 28-pin SSOP (5.30 mm body width, "T" suffix denotes tape-and-reel). A 16-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, RAM, peripherals, and I/O into one package. The PIC24E architecture is a 16-bit modified-Harvard RISC core optimized for deterministic real-time control, sitting in the broader hierarchy of microcontrollers -> embedded processors -> semiconductors. The PIC24EP128GP202T belongs to the "Enhanced" PIC24E sub-family, which adds hardware Op-Amps, comparators, CTMU (Charge Time Measurement Unit), and the Peripheral Trigger Generator (PTG) for chained, autonomous peripheral sequencing. Key features of this part include 70 MIPS CPU performance at up to 60 MHz, a single 3.0 V-3.6 V supply, two on-chip operational amplifiers (usable for signal conditioning before the ADC), two analog comparators with programmable reference, a 10/12-bit ADC with up to 1 Msps, PWM modules, and the CTMU for capacitive touch or precise time measurement. The "GP" designation indicates general-purpose peripherals, while the "T" suffix is a packaging identifier for tape-and-reel supply. The "-I/SS" suffix indicates the industrial temperature grade (-40 °C to +85 °C) and the SSOP-28 package. Architecturally, the PIC24E core uses a 16-bit instruction word with 24-bit addresses, supporting a linear 24-bit program space and a 16-bit data path. The PTG allows up to 32-step trigger sequences that can drive ADC conversions, PWM updates, and other peripherals without CPU intervention, freeing the core for application logic. Combined with the integrated Op-Amps, designers can build closed-loop analog control systems using only the PIC24EP128GP202, no external analog front-end required. Typical applications include industrial motor control, sensor signal conditioning, LED lighting control, switched-mode power supply (SMPS) digital control, medical instrumentation, automotive body and accessory modules (industrial temperature range), and consumer appliances. The CTMU makes the part well suited for capacitive touch interfaces, while the Op-Amps and ADC enable direct interface to bridge sensors, thermocouples, and current shunts. When designing with this MCU, allocate pin budget carefully - SSOP-28 has only 28 pins, so the two Op-Amps and two comparators may share I/O with digital functions via PPS (Peripheral Pin Select). Use Microchip's MPLAB X IDE and XC16 compiler for firmware development; both are free and integrate with the PIC24E instruction set and DSP library. This page synthesizes current distributor pricing, drop-in same-package alternatives, application notes, and design guidance not consolidated in the manufacturer datasheet.

Cotización Contacto
PIC24EP128GP204-E/MV - 16-Bit 70 MIPS MCU, 128KB Flash | Microchip
PIC24EP128GP204-E/MV

PIC24EP128GP204-E/MV - 16-Bit 70 MIPS MCU, 128KB Flash | Microchip

The Microchip Technology PIC24EP128GP204-E/MV is a 16-bit MCU from the PIC24EP general-purpose family, integrating 128 KB of Flash program memory, 16 KB of RAM, and a high-speed 70 MIPS core in a 48-pin UQFN (MV) 6x6 mm exposed-pad package. It delivers up to 60 MIPS at 60 MHz CPU clock and is specified over the -40C to +125C extended automotive temperature range (E suffix), with AEC-Q100 qualification supporting automotive-grade designs. What is a PIC24EP microcontroller? The PIC24EP is a 16-bit Digital Signal Controller (DSC) family that sits in Microchip's PIC24E performance tier between the PIC24F baseline family and the dsPIC33 high-end DSC family. Architecturally it is a 16-bit RISC MCU (Harvard architecture) with DSP-class instructions, DMA, and rich analog peripherals, intended for applications needing more performance than PIC24F but not requiring dsPIC33 motor-control or audio codecs. Within the system hierarchy, PIC24EP belongs to: microcontroller -> embedded MCU -> 16-bit RISC/DSC -> PIC24E family -> general-purpose + advanced-analog segment. Key features include a 70 MIPS core, 128 KB Flash (43K x 24), 16 KB SRAM, multiple 16-bit timers, a 10/12-bit ADC with up to 1.1 Msps conversion rate, two internal operational amplifiers (the signature "GP204 with Op Amps" feature), two analog comparators, CTMU (Charge Time Measurement Unit) for capacitive touch and precise time measurement, a Peripheral Trigger Generator (PTG) for hardware-based state machines, and multiple communication peripherals (UART, SPI, I2C, ECAN). The 48-UQFN package with thermal pad supports up to 35 GPIO pins and integrates a high-speed PWM module. The PIC24EP architecture uses a modified Harvard bus with separate program and data paths and a hardware multiply/divide unit, enabling single-cycle MAC operations. The PTG peripheral can autonomously chain ADC conversions, PWM updates, and timer captures without CPU intervention, which offloads deterministic tasks from the core and reduces interrupt latency in motor control and power-conversion applications. Typical applications include automotive body electronics, industrial sensor conditioning (using on-chip op amps), capacitive touch interfaces (using CTMU), brushless DC motor drives, LED lighting controllers, and general-purpose 16-bit embedded controllers that need more analog integration than PIC24F can offer. The extended temperature grade and AEC-Q100 qualification make it well suited to under-hood and chassis subsystems. When designing with this part, carefully review the supply voltage range (typically 3.0 V to 3.6 V), use the exposed thermal pad with a properly sized copper pour for thermal relief, and follow Microchip's oscillator and decoupling recommendations in the family reference manual to achieve the rated 60 MIPS without EMI issues. This page synthesizes distributor pricing from DigiKey and Octopart, AEC-Q100-compliant drop-in alternatives, and application-engineering notes that supplement the manufacturer datasheet with practical selection guidance.

Cotización Contacto
PIC24EP128GP204-E/PT - 16-Bit 60 MIPS 128KB Flash MCU | Microchip
PIC24EP128GP204-E/PT

PIC24EP128GP204-E/PT - 16-Bit 60 MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24EP128GP204-E/PT is a 16-bit microcontroller from the PIC24E general-purpose family, delivering up to 60 MIPS of performance from a 70 MIPS capable core, with 128 KB (43K x 24) of Flash program store and 16 KB of SRAM, housed in a 44-pin TQFP (10x10 mm) package. The -E suffix indicates the extended industrial temperature grade, enabling operation from -40C to +125C for harsh-environment designs. The PIC24EP core integrates a rich analog and digital peripheral set including operational amplifiers, comparators, a Charge Time Measurement Unit (CTMU), and a Peripheral Trigger Generator (PTG) for autonomous peripheral sequencing. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash for program, SRAM for data, EEPROM for non-volatile data), and a configurable set of peripherals on one die. The PIC24EP family sits within the 16-bit Digital Signal Controller (DSC) class, which adds hardware multiply, hardware divide, DSP-oriented instructions, and deterministic interrupt latency on top of standard MCU architecture. This category is best understood in the hierarchy: microcontroller -> 16-bit MCU/DSC -> PIC24E family -> power-managed general-purpose MCU with integrated op-amps. Key features include 60 MIPS core performance, 128 KB self-programmable Flash with ECC, 16 KB SRAM, a 10/12-bit ADC with up to 1 MSPS conversion rate, multiple UART/SPI/I2C interfaces, and four 16-bit timers. The integrated op-amps and comparators reduce external analog component count for signal conditioning, while the Peripheral Trigger Generator enables timed, low-CPU-overhead sequencing of ADC conversions and PWM edges. The CTMU supports capacitive touch sensing and precise time-of-flight measurement. Architecturally, the PIC24EP uses a modified Harvard architecture with separate buses for instruction and data fetch, a 24-bit instruction word, and a 16-bit data path. This combination yields high code density per MHz and deterministic interrupt response, while the on-chip op-amps are trimmed at factory test to reduce offset and drift. The device operates from 3.0V to 3.6V and includes multiple power-management modes for battery-friendly standby operation. Typical applications include industrial control, motor drive signal conditioning, power-conversion feedback loops, sensor interfaces, automotive body and sensor ECUs (when used as the non-automotive qualified sibling), and consumer appliances that benefit from integrated analog. The -E temperature grade broadens its reach to outdoor industrial, automotive cabin electronics, and lighting control. Design consideration: route the analog supply (AVDD) and ground (AVSS) with separate traces from their digital counterparts, place the 10 uF + 0.1 uF decoupling pair within 5 mm of VDD, and consult the family reference manual for PTG timing diagrams when chaining peripheral events. This page consolidates distributor pricing, drop-in package equivalents, and design guidance not available on the manufacturer's parametric summary page.

Cotización Contacto
PIC24EP128GP204-E/TL - 16-bit 70 MIPS MCU, 128KB Flash | Microchip
PIC24EP128GP204-E/TL

PIC24EP128GP204-E/TL - 16-bit 70 MIPS MCU, 128KB Flash | Microchip

The Microchip PIC24EP128GP204-E/TL is a 16-bit microcontroller from the PIC24EP family, featuring a 70 MIPS high-performance core, 128 KB of Flash program memory, 16 KB of RAM, and a 44-pin VTLA (6x6 mm) exposed-pad surface-mount package. It operates from a 3.0V to 3.6V supply and is qualified to the AEC-Q100 automotive standard, making it suitable for safety-critical and harsh-environment designs. The -E temperature grade extends the operating range to -40C to +125C, supporting under-hood and industrial deployments. A 16-bit microcontroller (MCU) is a programmable processor that integrates a CPU core, volatile and non-volatile memory, and a rich set of peripherals (ADC, timers, communication interfaces) into a single chip. PIC24E-series MCUs occupy the mid-performance tier of Microchip's dsPIC/PIC24 lineup, sitting between 8-bit PIC MCUs and the higher-end dsPIC33 digital signal controllers, optimized for code density, deterministic interrupt response, and advanced analog integration. Key differentiating features include a 10/12-bit ADC with up to 1.1 Msps conversion rate, up to four on-chip operational amplifiers (Op Amps), a Charge Time Measurement Unit (CTMU) for capacitive touch and accurate time measurement, a Peripheral Trigger Generator (PTG) for hardware-state-machine automation, and four standard 16-bit timers. Communication peripherals cover up to two UART, two SPI, and two I2C interfaces, plus a Parallel Master Port for external memory expansion. Architecturally, the PIC24E core uses a modified Harvard architecture with 16-bit data paths, a 24-bit instruction word, and a 16x16 hardware multiplier that sustains the 70 MIPS throughput at 70 MHz CPU clock. The integrated Op Amps are routed to dedicated ADC channels, eliminating external signal conditioning in motor-control and sensor-interface designs. Typical uses include automotive body and chassis modules, industrial motor control, sensor signal conditioning, and low-cost DSP-adjacent applications such as digital filtering and PID control loops. Designers choose the -E/TL grade specifically when AEC-Q100 qualification and the compact VTLA-44 package are required for space-constrained or automotive-grade layouts. When designing with this device, allocate sufficient PCB copper beneath the exposed thermal pad (EP) to meet the package's thermal resistance specifications, and confirm the supply voltage stays within the 3.0V to 3.6V window; dropouts below 3.0V will trigger the brown-out reset. The Peripheral Trigger Generator (PTG) is often overlooked and can offload complex sequencing from the CPU, freeing MIPS for application logic. This page synthesizes distributor pricing for the PIC24EP128GP204-E/TL, parametric drop-in alternatives within the VTLA-44 footprint, and practical design notes not consolidated in the manufacturer datasheet.

Cotización Contacto
PIC24EP128GP204-H/ML - 70 MIPS 16-bit MCU, 128KB Flash, AEC-Q100 | Microchip
PIC24EP128GP204-H/ML

PIC24EP128GP204-H/ML - 70 MIPS 16-bit MCU, 128KB Flash, AEC-Q100 | Microchip

The Microchip PIC24EP128GP204-H/ML is a high-performance 16-bit microcontroller from the PIC24EP family, featuring a 70 MIPS CPU core, 128 KB of Flash program memory, 16 KB of SRAM, and integrated analog peripherals. It operates at up to 60 MHz (with 70 MIPS throughput) and is housed in a 44-pin VQFN (ML) package with exposed thermal pad. What is a PIC24EP microcontroller? The PIC24EP is Microchip's high-performance 16-bit DSC (Digital Signal Controller) family that combines MCU control capabilities with DSP-grade throughput. The 'EP' suffix denotes enhanced peripherals: dual 10/12-bit ADCs at up to 1.1 Msps, on-chip op-amps, CTMU (Charge Time Measurement Unit) for capacitive touch, a Peripheral Trigger Generator (PTG), and High-Speed PWM with 7 ns resolution. The PIC24EP sits above PIC24FJ in the taxonomy: PIC24EP128GP204 -> PIC24EP -> PIC24 -> 16-bit MCU -> microcontroller -> embedded IC -> semiconductor. Key features of this part include 70 MIPS core performance, 128 KB Flash (43K x 24 words), 16 KB SRAM, up to 35 analog-capable I/O pins, and an AEC-Q100 qualification for automotive applications. The '-H' suffix indicates the High-temperature automotive grade (-40C to +150C ambient), and '/ML' designates the 44-pin VQFN surface-mount package. Integrated peripherals include USB, CAN, and multiple UART/SPI/I2C interfaces. Technical depth: the dsPIC/PIC24EP core uses a modified Harvard architecture with a 24-bit instruction word and 16-bit data path. The PTG sequencer offloads real-time tasks from the CPU, allowing deterministic peripheral chaining without interrupt overhead. Dual 10-bit ADCs sample at up to 1.1 Msps each, enabling simultaneous motor-current and back-EMF measurement for sensorless BLDC control. On-chip op-amps buffer analog signals before ADC conversion, eliminating external amplifier cost and noise pickup. Typical applications include automotive body electronics and sensor conditioning, BLDC/PMSM motor control, industrial PLC analog front-ends, capacitive touch HMI interfaces, and low-latency digital power conversion. The integrated PTG and op-amps allow fully-deterministic sensor acquisition loops without CPU intervention. Design consideration: the 44-pin VQFN exposed pad must be soldered to a sufficiently large copper pour (minimum ~1 sq inch) to keep junction temperature within the -40C to +150C automotive range under maximum CPU activity. This page synthesizes distributor pricing, drop-in Microchip alternates, and automotive-grade design considerations not collected on a single manufacturer page.

Cotización Contacto
PIC24EP128GP204-I/PT - 16-Bit 70 MIPS 128KB Flash MCU | Microchip
PIC24EP128GP204-I/PT

PIC24EP128GP204-I/PT - 16-Bit 70 MIPS 128KB Flash MCU | Microchip

The Microchip PIC24EP128GP204-I/PT is a high-performance 16-bit microcontroller from the PIC24E general-purpose family, featuring a 70 MIPS CPU core, 128 KB of Flash program memory, and 16 KB of SRAM in a 44-pin TQFP (10x10 mm) package. The device integrates dual op-amps, advanced 10-bit ADC modules running up to 1.1 Msps, CTMU touch peripherals, and a Peripheral Trigger Generator (PTG) for hardware state-machine I/O control. Operating from 3.0V to 3.6V with an industrial -40C to +85C temperature range, it targets high-end general-purpose embedded designs that need DSP-class throughput on a single 3.3V rail. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash), data memory (SRAM), and a configurable set of peripherals (ADC, timers, communication, I/O) on a single silicon die. In the system hierarchy it sits below power management ICs and above discrete logic: a complete embedded design typically pairs an MCU with an LDO, a crystal oscillator, and driver ICs. The PIC24E family specifically occupies the mid-performance tier within Microchip's 16-bit MCU roadmap - more capable than PIC24F but below the dsPIC33 DSC family - making it a workhorse for motor control, digital power, and signal-conditioning applications. Key features include 128 KB Flash (43K x 24 words), 16 KB SRAM, 70 MIPS CPU throughput at 60 MHz (Fosc = 240 MHz with PLL), four UART/SPI/I2C modules, two I2C modules, five 16-bit timers, and 35 digital I/O pins. The integrated op-amps can be used for active signal conditioning ahead of the ADC, eliminating external analog components. The CTMU enables capacitive touch sensing and precise time-based current measurement. Architecturally, the PIC24E uses a 16-bit modified Harvard core with a 24-bit instruction word for improved code density, 31 working registers, and a hardware multiplier/DIV unit. The 70 MIPS sustained throughput is competitive with Cortex-M3 devices in its class while offering Microchip's mature MPLAB X toolchain ecosystem and DSP library support. Typical applications include industrial motor control (BLDC, PMSM, stepper), digital switching power conversion (digital PFC, LLC controllers), sensor signal conditioning, LED lighting controllers, and medical instrumentation front-ends. The PTG peripheral is particularly valued in multi-loop digital power supplies where deterministic hardware sequencing reduces firmware overhead. When designing with this part, allow at least 1 square inch of ground plane under the TQFP for thermal dissipation, and route the analog AVss/AVdd pair as a star away from noisy digital returns. The 44-pin TQFP leaves most peripherals accessible without pin-sharing tradeoffs. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto
PIC24EP128GP204T-E/ML - 16-bit 60MIPS MCU 128KB Flash | Microchip
PIC24EP128GP204T-E/ML

PIC24EP128GP204T-E/ML - 16-bit 60MIPS MCU 128KB Flash | Microchip

The Microchip Technology PIC24EP128GP204T-E/ML is a high-performance 16-bit microcontroller from the PIC® 24EP family, featuring a 60 MIPS PIC Harvard core, 128 KB (43K x 24) of Flash program memory and a 44-pin QFN EP (8x8 mm) exposed-pad package with automotive AEC-Q100 qualification. Operating from a 3.0 V to 3.6 V supply, it integrates a Peripheral Trigger Generator (PTG), Charge Time Measurement Unit (CTMU), on-chip op-amps, and a 10/12-bit ADC with superior analog performance for mixed-signal designs. A PIC24E 16-bit microcontroller is a member of Microchip's enhanced PIC24 family, which sits above the PIC16 and PIC18 8-bit lines and below the dsPIC33/PIC32 MIPS-class devices in the broader Microchip MCU hierarchy (8-bit MCU -> 16-bit MCU -> 32-bit MCU). The 'EP' suffix designates the high-speed 70 MIPS-capable core variant with DSP instructions, advanced peripherals, and extended memory addressing, while the 'T-E/ML' suffix indicates tape-and-reel packaging, the extended (-40C to +125C) automotive temperature grade, and the 44-pin QFN package. Key features of the PIC24EP128GP204T-E/ML include up to 60 MIPS core throughput, 128 KB self-programmable Flash with ECC, 8 KB SRAM, 4 KB EEPROM (family-typical), multiple communication peripherals (I2C, SPI, UART with IrDA/LINbus support), and a high-resolution PWM module. The CTMU enables capacitive touch sensing and precise time measurement, while the integrated op-amps simplify analog front-end designs and reduce BOM count. Architecturally, the device uses a Harvard bus with separate program and data paths, a hardware multiply/divide engine, and tightly-coupled peripheral trigger logic (PTG) that allows peripherals to chain events without CPU intervention, freeing the core for application-level processing. This combination is well suited to closed-loop control, motor drive, and high-end general-purpose embedded designs. Typical applications include automotive body electronics, industrial motor control, digital power conversion, capacitive touch HMIs, sensor signal conditioning, and high-performance sensor hubs. The AEC-Q100 qualification makes it attractive for under-hood and body-control ECUs. A primary design consideration when using this device is the 3.3 V-only supply range, which requires level shifting when interfacing to 5 V peripherals. Additionally, the 44-QFN exposed-pad must be soldered to a sufficient copper pour on the PCB for thermal dissipation and electrical grounding. This page synthesizes distributor pricing, drop-in alternative listings and practical design notes drawn from Microchip documentation and authorized distributor data, offering engineers a single-source reference not available in the bare datasheet.

Cotización Contacto
PIC24EP128GP204T-E/PT - 16-Bit 60MIPs 128KB Flash MCU | Microchip
PIC24EP128GP204T-E/PT

PIC24EP128GP204T-E/PT - 16-Bit 60MIPs 128KB Flash MCU | Microchip

The Microchip Technology PIC24EP128GP204T-E/PT is a 16-bit PIC microcontroller from the PIC24E general-purpose family, operating at up to 60 MIPS core speed and housed in a 44-pin TQFP (10x10 mm) package. The device integrates 128 KB (43K x 24) of Flash program memory and 16 KB of RAM, with on-chip peripherals including high-speed PWM, operational amplifiers, comparators, a Charge Time Measurement Unit (CTMU), and a Peripheral Trigger Generator (PTG). What is a PIC24E MCU? The PIC24E is Microchip's high-performance 16-bit dsPIC/PIC24 microcontroller family built on a modified Harvard architecture. It sits within the broader taxonomy of MCU -> 16-bit MCU -> PIC24 family -> general-purpose MCU with DSP extensions. These MCUs combine deterministic interrupt response with enhanced arithmetic capability for motor control, power conversion, and signal processing. Key features include 60 MIPS performance from a 3.0V to 3.6V supply, AEC-Q100 automotive qualification, and rich connectivity through I2C, SPI, UART/USART, IrDA, and LINbus interfaces. The T suffix in the part number indicates tape-and-reel packaging, while the E grade indicates the -40C to +125C extended automotive temperature range. The PTG peripheral enables complex timing and sequencing without CPU intervention. Typical applications include automotive body and chassis ECUs, industrial motor control, sensor signal conditioning with on-chip op-amps, LED lighting controllers, and consumer appliances requiring robust connectivity. The high-speed 10/12-bit ADC and op-amp integration make the PIC24EP128GP204 well-suited for closed-loop analog control. When designing with this part, ensure your compiler is configured for the PIC24E instruction set and that the ICD 3 / ICD 4 / PICkit 4 debugger is selected. Verify the supply decoupling network meets the 100 nF + bulk capacitor recommendation in the datasheet. This page synthesizes distributor pricing, AEC-Q100 cross-brand drop-in alternatives, and practical design notes not found on stock product listings.

Cotización Contacto
PIC24EP128GP204T-E/TL - 16-Bit 70MIPS MCU 128KB Flash | Microchip
PIC24EP128GP204T-E/TL

PIC24EP128GP204T-E/TL - 16-Bit 70MIPS MCU 128KB Flash | Microchip

The Microchip Technology PIC24EP128GP204T-E/TL is a 16-bit microcontroller from the PIC24EP general-purpose MCU family, delivering up to 70 MIPS of CPU performance from a high-speed modified Harvard architecture core. The device integrates 128 KB of Flash program memory (43K x 24 words) and 16 KB of SRAM in a 44-pin VTLA (6x6 mm) surface-mount package with exposed thermal pad. It operates across the 3.0V to 3.6V industrial supply range at temperatures from -40C to +125C and is AEC-Q100 qualified for harsh-environment and automotive applications. What is a 16-bit MCU? A 16-bit microcontroller is an embedded computing device with a 16-bit data path, 16-bit-wide registers, and a unified address space that gives it a middle position between 8-bit MCUs (lower cost, simpler peripherals) and 32-bit MCUs (higher performance, richer ecosystems). In the broader taxonomy, the PIC24EP128GP204T-E/TL belongs to microcontroller -> 16-bit MCU -> PIC24E family -> DSP-enhanced general-purpose MCU -> Microchip's dsPIC/PIC24 line of embedded controllers. Key differentiating features include a 12-bit ADC with up to 1 Msps conversion rate, two on-chip operational amplifiers (suitable for signal conditioning), a Charge Time Measurement Unit (CTMU) for capacitive touch and precise time measurement, and a Peripheral Trigger Generator (PTG) that orchestrates complex peripheral sequencing without CPU intervention. The PTG is uncommon in 16-bit MCUs and lets hardware timers trigger ADC conversions, PWM updates, and GPIO events deterministically. The architecture exposes a 16-element DSP engine, dual-port RAM-style working registers, and a hardware multiplier, supporting single-cycle MAC operations. The result is 70 MIPS with deterministic interrupt latency suitable for digital filtering, motor commutation, and power-conversion control loops. Typical applications include automotive body and chassis ECUs, industrial sensor conditioning with on-chip op-amps, BLDC/PMSM motor control, LED lighting drivers with closed-loop current sensing, and AEC-Q100-grade safety peripherals. The on-chip op-amps eliminate external instrumentation stages for thermocouple, photodiode, and current-shunt circuits. When designing with this part, note that the VTLA-44 (6x6 mm) package has a small thermal pad that must be soldered to a PCB copper pour for thermal and electrical performance. Code development is supported by MPLAB X IDE and the XC16 compiler, with extensive peripheral libraries. This page synthesizes verified distributor pricing, AEC-Q100 cross-brand drop-in alternatives in the same VTLA-44 package, and design notes that go beyond the manufacturer datasheet.

Cotización Contacto
PIC24EP128GP204T-I/ML - 70 MIPS 16-bit MCU 128KB Flash 44-QFN | Microchip
PIC24EP128GP204T-I/ML

PIC24EP128GP204T-I/ML - 70 MIPS 16-bit MCU 128KB Flash 44-QFN | Microchip

The Microchip Technology PIC24EP128GP204T-I/ML is a 16-bit microcontroller from the PIC24EP family, integrating a high-performance 70 MIPS dsPIC33/PIC24E core with 128 KB Flash program memory and 16 KB RAM in a 44-pin QFN (8x8 mm) package with exposed thermal pad. The “T” suffix denotes tape-and-reel packaging and the “I” suffix specifies the industrial -40C to +85C temperature range; the “/ML” suffix identifies the 44-QFN package. A microcontroller (MCU) is a single-chip computer that combines a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals (timers, ADC, communication interfaces, GPIO). The PIC24EP family sits in Microchip’s high-performance 16-bit MCU tier, sitting between the 8-bit PIC18 family and the 32-bit PIC32MX/dsPIC33 family. The PIC24E core uses a modified Harvard architecture with a 16-bit data path and 24-bit instruction set, optimized for both C code density and deterministic real-time DSP-style signal processing. Key features include 128 KB (43K x 24 instructions) Flash with self-programming, 16 KB SRAM, up to 35 I/O, two 12-bit ADCs with 500 ksps performance (shared 10-channel input mux), three op-amps, one CTMU (Charge Time Measurement Unit) for capacitive touch or precise time measurement, and one PTG (Peripheral Trigger Generator) that offloads complex timing sequences from the CPU. Communication peripherals include up to two UART, two SPI, and one I2C. The peripheral set is tailored to mixed-signal and motor-control front ends. Architecturally, the PIC24E core delivers 70 MIPS at 70 MHz CPU clock from a 3.0-3.6 V supply, with a hardware multiplier and zero-overhead looping for high-throughput DSP-like math. The dual 12-bit ADC and integrated op-amps remove the need for external signal-conditioning ICs in many sensor and motor-control designs, while the CTMU/PTG combination enables precise event sequencing. Typical applications include industrial motor control (BLDC/PMSM FOC), digital power conversion, advanced sensor signal conditioning, capacitive-touch user interfaces, and general-purpose embedded control with on-chip analog. The wide operating voltage (3.0-3.6 V) and industrial temperature range suit industrial, appliance, and consumer embedded designs. When designing with the PIC24EP128GP204T-I/ML, ensure the exposed thermal pad (EP) is soldered to a continuous ground copper pour for both thermal dissipation and low-impedance ground return. Decouple VDD/AVDD pairs with 0.1 uF and 1 uF ceramics placed within 5 mm of the pins, and reserve one GPIO for an SWD/ICSP programming header (PGECx/PGEDx). This page synthesizes distributor pricing, drop-in alternatives drawn from the Microchip same-family portfolio, and practical design notes not found on standard distributor listings.

Cotización Contacto
PIC24EP128GP204T-I/TL - 16-bit 70MIPS MCU 128KB Flash | Microchip
PIC24EP128GP204T-I/TL

PIC24EP128GP204T-I/TL - 16-bit 70MIPS MCU 128KB Flash | Microchip

The Microchip Technology PIC24EP128GP204T-I/TL is a 16-bit PIC microcontroller from the PIC24EP "Enhanced Performance" family, delivering up to 70 MIPS core performance with 128 KB of Flash and 16 KB of SRAM in a 44-pin VTLA (6x6 mm) surface-mount package. The PIC24EP "GP" general-purpose sub-family integrates advanced analog peripherals including operational amplifiers, comparators, a Charge Time Measurement Unit (CTMU), and a Peripheral Trigger Generator (PTG) for hardware-state-machine automation. A 16-bit microcontroller (MCU) is a microprocessor with internal Flash, RAM, and peripherals optimized for embedded control. The PIC24EP family sits within Microchip's dsPIC/PIC24 product hierarchy: 16-bit MCU -> dsPIC/PIC24 family -> PIC24EP "Enhanced Performance" sub-family -> general-purpose (GP) class. This taxonomy places the PIC24EP128GP204 as a mid-range 16-bit MCU with high analog integration, sitting between cost-optimized PIC24FJ parts and the high-performance dsPIC33EP digital signal controllers. Key differentiating specifications include 70 MIPS CPU throughput (4.7 µs instruction cycle latency for fast deterministic control loops), 128 KB self-programmable Flash with EEPROM emulation, 16 KB SRAM, dual 10-bit DACs, three op-amps internal to the die, four analog comparators, and a 12-bit ADC with up to 500 ksps conversion rate. The CTMU enables capacitive touch sensing and precision time measurement down to nanosecond resolution. Architecturally, the PIC24EP core uses a modified Harvard architecture with a 24-bit instruction word and 16-bit data path, enabling C-compiler-friendly operation with the MPLAB XC16 toolchain. The integrated PTG module allows complex peripheral sequencing without CPU intervention, reducing firmware complexity for motor control and power-conversion feedback loops. The on-chip op-amps and comparators can directly condition sensor signals before ADC digitization, eliminating external signal-conditioning components in many designs. Typical applications include industrial motor control (BLDC, PMSM, stepper drives), digital power conversion (PFC, LLC, full-bridge converters), high-end LED lighting drivers, capacitive-touch user interfaces, sensor conditioning for IoT edge nodes, and medical instrumentation requiring precision analog front ends. The wide operating temperature range (-40 °C to +85 °C industrial grade) and 3.3 V single-supply operation make the part well suited for industrial 24V-bus-derived power architectures. Design consideration: the VTLA-44 (6x6 mm) package has an exposed thermal pad that must be soldered to a copper pour on the PCB (minimum 1 square inch recommended) for thermal dissipation and electrical grounding. Decoupling requires at minimum one 100 nF X7R capacitor within 3 mm of each VDD/AVDD pin pair. For applications requiring >40 MIPS sustained throughput, ensure code execution stays within Flash wait-state timing by referencing the MPLAB XC16 compiler optimization settings. This page synthesizes distributor pricing, drop-in Microchip family alternatives, and practical design notes not found in the bare manufacturer datasheet, enabling faster component selection and BOM risk mitigation for engineers evaluating the PIC24EP128GP204T-I/TL for new designs.

Cotización Contacto
PIC24EP128GP206-E/MR - 16-Bit MCU, 128KB Flash, 60 MIPS | Microchip
PIC24EP128GP206-E/MR

PIC24EP128GP206-E/MR - 16-Bit MCU, 128KB Flash, 60 MIPS | Microchip

The Microchip Technology PIC24EP128GP206-E/MR is a 16-bit microcontroller from the PIC24EP general-purpose family, featuring 128KB of Flash program memory, 16KB of RAM, and a 60 MIPS (70 MHz) high-performance CPU core with DSP instructions, housed in a 64-pin VQFN (MR) 9x9 mm package with exposed thermal pad. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash/RAM), and programmable peripherals on one die. Within the broader taxonomy, MCUs belong to the class of embedded processors, which also includes microprocessors (MPUs) and DSPs. The PIC24E/PIC24EP family sits between 8-bit PIC MCUs and the 32-bit PIC32MX/ARM Cortex-M devices in Microchip's portfolio, and is intended for high-end general-purpose applications that need DSP-class signal-processing throughput without paying for a 32-bit core. The "EP" enhancement adds 70 MIPS core speed, a 12-bit ADC with up to 16 channels, op-amps, comparators, CTMU, and the Peripheral Trigger Generator (PTG) for hardware event sequencing. Key features include a 16-bit modified Harvard architecture with a 16x16 hardware multiplier, 32-bit accumulator, and single-cycle MAC operation; up to 53 general-purpose I/O pins; multiple communication peripherals (UART, SPI, I2C, ECAN); and 5 PWM output channels with 16-bit resolution. The 12-bit 1.1 MSPS ADC with up to 16 analog inputs supports precision mixed-signal designs, while four on-chip op-amps and three comparators enable direct sensor signal conditioning. The device is fabricated on a CMOS process that delivers 70 MIPS at 3.3 V while preserving deterministic interrupt latency suitable for real-time control loops. The integrated PTG timer chain allows peripherals to trigger each other in hardware, offloading CPU cycles in motor-control and power-conversion firmware. The dual-watchdog timer and code protection further harden the design for unattended industrial deployments. Typical applications include industrial motor control (BLDC/PMSM FOC), digital power conversion (DC-DC, PFC, LLC), advanced sensor conditioning, solar inverters, LED lighting controllers, and AEC-Q100 automotive body/comfort modules. The wide operating temperature range of -40C to +125C (E suffix) supports both industrial and automotive under-hood environments. When designing with this part, ensure the ICSP programming header is accessible on the PCB because the exposed thermal pad (EP) under the 64-VQFN must be soldered to a sufficient copper pour to meet the 31 C/W theta_JA thermal budget at full CPU load. This page synthesizes distributor stock and lead-time, drop-in alternative candidates from the same PIC24EP family and cross-brand 32-bit MCU equivalents, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
PIC24EP128GP206-H/MR - 16-bit 70 MIPS MCU 128KB Flash 64-pin VQFN | Microchip
PIC24EP128GP206-H/MR

PIC24EP128GP206-H/MR - 16-bit 70 MIPS MCU 128KB Flash 64-pin VQFN | Microchip

The Microchip Technology PIC24EP128GP206-H/MR is a high-performance 16-bit microcontroller from the PIC24E general-purpose family, delivering 70 MIPS core performance with 128 KB of Flash program memory and housed in a 64-pin VQFN (MR) package. It features the dsPIC/PIC24E enhanced CPU core with excellent performance and code density, plus 16 KB of on-chip RAM, a 12-bit ADC with up to 1.1 Msps conversion rate, and advanced analog peripherals including on-chip op-amps and a Charge Time Measurement Unit (CTMU). What is a PIC24E general-purpose microcontroller? The PIC24E family sits in the 16-bit MCU segment of Microchip's product hierarchy (16-bit MCU -> microcontroller -> embedded computing -> semiconductor), offering a 16-bit modified Harvard architecture with DSP-oriented instructions. The 'E' series pushes performance to 70 MIPS (versus 16 MIPS on the older PIC24F), while preserving the deterministic interrupt model and rich peripheral set that makes PIC microcontrollers a workhorse for real-time embedded designs. The /MR suffix indicates a 64-pin VQFN package, the /H suffix denotes an extended temperature grade (-40C to +150C), and the -GP variant targets general-purpose applications without on-chip DSC (digital signal controller) features. Key features of the PIC24EP128GP206-H/MR include a 70 MIPS CPU core with single-cycle 16x16 MAC, dual 36/40/48 KB Flash options in the family, 10-bit/12-bit ADC with multiple conversion modes, up to 53 general-purpose I/O pins, multiple communication peripherals (UART, SPI, I2C), enhanced PWM with up to 9 channels, Peripheral Trigger Generator (PTG) for complex timing, and a CTMU for capacitive touch and time measurement. The 64-pin VQFN package provides a compact 9x9 mm footprint with an exposed thermal pad that lowers thermal resistance for high-MIPS continuous operation. Typical applications include industrial motor control and variable-frequency drives, advanced sensor signal conditioning, LED lighting controllers, UPS and power conversion, automotive body and chassis subsystems (with proper qualification), digital power conversion, and high-performance consumer appliances. The 70 MIPS performance and DSP instructions also support audio processing and real-time control loops where deterministic execution is critical. When designing with the PIC24EP128GP206-H/MR, observe the -40C to +150C extended operating temperature, which requires PCB layout that ensures the exposed pad is soldered for proper heat dissipation. The device supports 3.0V to 3.6V single-supply operation; pair the MCU with a low-noise LDO such as the MCP1700 or TPS7A4700 family and decouple every VDD/AVDD pair with 100 nF ceramic capacitors placed within 3 mm of the pins. The H/MR suffix combination indicates a specialized extended-temperature part; verify lead time through authorized distributors before committing to production schedules.

Cotización Contacto
PIC24EP128GP206-H/PT - 16-bit 70 MIPS 128KB Flash MCU | Microchip
PIC24EP128GP206-H/PT

PIC24EP128GP206-H/PT - 16-bit 70 MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24EP128GP206-H/PT is a 16-bit microcontroller from the PIC24E general-purpose family, featuring a 70 MIPS core, 128 KB flash, 16 KB RAM, and a 64-pin TQFP package. The device operates from a 3.0 V to 3.6 V supply, integrates three on-chip op amps, four comparators, a Charge Time Measurement Unit (CTMU), and a Peripheral Trigger Generator (PTG), making it suitable for high-end general-purpose applications. AEC-Q100 qualification of the -H temperature grade (-40 °C to +150 °C) qualifies the part for automotive deployment. A 16-bit MCU (microcontroller) is a single-chip computer that integrates a CPU, program memory (flash), data memory (RAM), and peripherals on one silicon die. Within the broader taxonomy, a 16-bit MCU sits between 8-bit MCUs (PIC10/12/16) and 32-bit MCUs (PIC32, ARM Cortex-M) and is widely used where 8-bit performance is insufficient but 32-bit cost or power is unjustified. The PIC24E family uses a modified Harvard architecture with a 16-bit data path and 24-bit instructions, optimizing code density. Key features of the PIC24EP128GP206 include a 70 MIPS CPU speed at 70 MHz, 128 KB flash (43 K x 24 words), 16 KB SRAM, and advanced peripherals such as a 12-bit ADC with 500 ksps conversion rate, three op amps with programmable gain, and four high-speed comparators. The CTMU enables precise time measurement for capacitive touch and general-purpose timing, while the Peripheral Trigger Generator sequences peripheral events without CPU intervention. CAN, SPI, I²C, and UART interfaces support communication with external sensors and actuators. Typical applications include automotive body controllers, industrial sensor interfaces, motor control signal conditioning, and high-precision measurement systems. The integration of op amps and comparators on-die reduces BOM count and PCB area in mixed-signal designs. Compared with PIC24F devices, the PIC24E family offers higher MIPS throughput at the same MHz, allowing lower clock frequencies to meet the same performance budget, which reduces EMI. When designing with this device, ensure the 3.3 V rail is tightly regulated; ripple above 100 mV can induce ADC errors. Place decoupling capacitors (0.1 µF + 10 µF) within 5 mm of each VDD/VSS pair. The PTG should be programmed to offload timed events from the main loop, freeing CPU bandwidth for application logic. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing an engineer-ready reference that complements Microchip's official documentation.

Cotización Contacto
PIC24EP128GP206T-E/MR - 16-bit 60 MIPS MCU, 128KB Flash | Microchip
PIC24EP128GP206T-E/MR

PIC24EP128GP206T-E/MR - 16-bit 60 MIPS MCU, 128KB Flash | Microchip

The Microchip Technology PIC24EP128GP206T-E/MR is a 16-bit PIC24EP series microcontroller with a 60 MIPS CPU core, 128 KB of Flash program memory organized as 43K x 24, and 8 KB of SRAM, housed in a 64-pin VQFN (MR) 9x9 mm package with exposed thermal pad. It is part of the PIC24E "GP" general-purpose family, designed for high-performance mixed-signal embedded designs that need an automotive-grade temperature range (-40C to +125C) plus AEC-Q100 qualification. What is a PIC24E microcontroller? The PIC24E is Microchip's 16-bit dsPIC/PIC MCU family built on a modified Harvard architecture with a wide 24-bit instruction word and 16-bit data path. It sits in the hierarchy: PIC24E -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor. Compared with PIC24F parts, PIC24E adds higher MIPS (up to 70), more DMA channels, more advanced analog peripherals (CTMU, op amps, PTG), and faster ADC conversion. Key features include 128 KB Flash (43K x 24 organization) for code storage, 8 KB SRAM, and a rich peripheral set: DMA controller, PWM, WDT, POR/BOR, peripheral trigger generator (PTG), charge time measurement unit (CTMU), and on-chip operational amplifiers. The 60 MIPS core delivers deterministic real-time response, while the 64-pin VQFN (9x9) package with EP provides good thermal dissipation for automotive environments. Architecturally, the PIC24EP128GP206 uses a modified Harvard bus with separate program and data paths, allowing simultaneous fetch + access. The 16-bit core executes most instructions in one cycle, giving 60 MIPS at 60 MHz FOSC. Integrated op amps and CTMU let designers implement touch sensing, signal conditioning, and slope-compensation without external analog ICs. Typical applications include automotive body and chassis ECUs, industrial motor control and sensor conditioning, digital power conversion (SMPS), LED lighting controllers, and consumer/medical devices that need AEC-Q100 reliability in a compact 64-pin QFN. Design consideration: the E/MR suffix indicates the extended (-40C to +125C) automotive temperature grade and Tape-and-Reel packaging; plan the land pattern for the 9x9 mm VQFN with a properly sized thermal pad tied to ground. This page consolidates parametric data, drop-in alternatives, and engineering guidance beyond what the bare datasheet provides.

Cotización Contacto
PIC24EP128GP206T-I/PT - 16-bit 70 MIPS 128KB Flash MCU | Microchip
PIC24EP128GP206T-I/PT

PIC24EP128GP206T-I/PT - 16-bit 70 MIPS 128KB Flash MCU | Microchip

The Microchip PIC24EP128GP206T-I/PT is a 16-bit microcontroller from the PIC24E general-purpose family, delivering 70 MIPS CPU performance from a 128 KB (43K x 24) Flash program memory and 16 KB SRAM, housed in a 64-pin TQFP (PT) package. It is specified for an industrial temperature range (-40C to +85C) and runs from a single 3.0V to 3.6V supply. The on-chip peripherals include high-performance ADC, op amps, CTMU, and a Peripheral Trigger Generator (PTG) targeting general-purpose embedded designs. A 16-bit MCU (microcontroller unit) is a single-chip computer that integrates a CPU, Flash program memory, SRAM, and peripherals on one die. The PIC24E family uses a Harvard architecture with a 16-bit data path and DSP-friendly instructions, sitting in the hierarchy: microcontroller -> embedded IC -> integrated circuit -> semiconductor. Compared with 8-bit MCUs, 16-bit parts offer higher throughput, more precise ADC math, and richer DSP capability, while remaining lower-cost and lower-power than 32-bit Cortex-M parts. Key features of the PIC24EP128GP206T-I/PT include 128 KB Flash, 16 KB SRAM, up to 53 general-purpose I/O, USB 2.0 full-speed On-The-Go, multiple UART/SPI/I2C interfaces, five 16-bit timers, and a 10/12-bit ADC with up to 1 Msps sampling. The CTMU allows capacitive touch sensing, while two on-chip op amps and a PTG engine reduce external component count and let designers orchestrate complex peripheral sequences without CPU intervention. The architecture is a modified Harvard CPU with a 24-bit instruction word, 16-bit data path, and a hardware MAC/DSP engine, giving the device a sustained throughput of 70 MIPS at 70 MHz CPU clock. This makes it well-suited to digital signal processing, motor control loops, and high-speed data acquisition where deterministic latency is required. Typical applications include industrial control and HMI, USB peripherals, motor and power-conversion control, capacitive touch user interfaces, medical instrumentation, and portable data loggers. The wide operating voltage and rich analog make it a strong fit for sensor conditioning and mixed-signal front ends. When designing with this part, reserve one I/O for the in-circuit serial programming (ICSP) interface so firmware can be updated on the board. Decouple VDD/VSS close to the package with 100 nF plus bulk capacitance, and follow Microchip's reference designs for USB impedance and trace routing. This page synthesizes distributor stock, drop-in alternative MPNs, and applied design notes beyond what the manufacturer datasheet alone provides.

Cotización Contacto
PIC24EP128MC202-E/SP - 16-bit 60 MIPS 128KB Flash Motor MCU | Microchip
PIC24EP128MC202-E/SP

PIC24EP128MC202-E/SP - 16-bit 60 MIPS 128KB Flash Motor MCU | Microchip

The Microchip Technology PIC24EP128MC202-E/SP is a 16-bit PIC24EP family microcontroller engineered for high-performance precision motor control, delivering 60 MIPS (70 MIPS for the underlying 24EP core) of computational throughput with 128 KB of Flash program memory and 16 KB of RAM, housed in a 28-pin SPDIP (0.300 inch) through-hole package. The -E/SP suffix denotes the -40C to +125C extended industrial/automotive temperature grade and SPDIP packaging, and the device is qualified to AEC-Q100 for automotive applications. A 16-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals on one die, executing instructions on 16-bit-wide data paths to balance code density, deterministic interrupt response, and arithmetic performance for embedded control. PIC24EP parts sit within the broader PIC microcontroller taxonomy (PIC10/12/16/18/24/32) and specifically the PIC24E sub-family, which adds enhanced DSP instructions, dual read-port Flash, and high-speed PWM peripherals that the 'MC' (Motor Control) variants further optimize. Key differentiating features include a 12-bit ADC with up to 500 ksps conversion rate, dual 16-bit/32-bit op-amps accessible to the ADC front-end, high-resolution PWM (typical 7.14 ns resolution at 70 MIPS) for field-oriented control (FOC) loops, four 32-bit timer/capture modules, two UART, two SPI, and one I2C peripheral, plus a 32-bit CRC engine. The 'MC' peripheral set was specifically tuned for sensorless and sensored BLDC, PMSM, ACIM, and stepper motor control, including hardware fault inputs and PWM shutdown logic. Architecturally, the PIC24EP uses a Harvard-style modified RISC core with a 24-bit instruction word and dual-port Flash allowing live reads while executing, accelerating firmware hot paths in motor ISR loops. The high-speed ADC-to-PWM datapath, with the op-amps pre-conditioning current shunt signals, lets a single MCU close current, torque, and velocity loops at 20-50 kHz without an external DSP. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous (PMSM) motor controllers for appliance pumps and fans, automotive body and HVAC actuators, industrial servo drives, drone ESCs, robotic joints, and field-oriented control drives for low-voltage battery-powered tools. Designers also deploy this part in power-conversion front-ends that require high-resolution PWM plus the on-chip op-amps for current sensing. When designing with the PIC24EP128MC202-E/SP, allocate the op-amp outputs to dedicated ADC channels to minimize latency, and use the on-chip high-resolution PWM for low-speed torque ripple reduction. Be aware that the 28-SPDIP package imposes a larger PCB footprint than equivalent QFN parts, so confirm mechanical fit before selecting this packaging option. This page synthesizes authorized Microchip parametric data, DigiKey distributor pricing, package diagrams, and pin-to-pin compatible drop-in alternatives - engineering content not consolidated on a single manufacturer or distributor page.

Cotización Contacto
PIC24EP128MC202-H/MM - 16-bit 60 MIPS 128KB Flash MCU | Microchip
PIC24EP128MC202-H/MM

PIC24EP128MC202-H/MM - 16-bit 60 MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24EP128MC202-H/MM is a 16-bit PIC24E microcontroller engineered for high-performance motor control applications, operating at up to 60 MIPS (70 MIPS peak) and delivering 128 KB of Flash program memory (43K x 24 words) with 16 KB of SRAM. It integrates dedicated motor-control peripherals including high-speed PWM (up to 1 ns PWM edge resolution), three on-chip operational amplifiers, and high-speed 12-bit ADCs (10/12-bit, 1.1 Msps), all in a compact 28-pin QFN-S (6x6 mm) package with exposed thermal pad. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (RAM), and programmable peripherals. The PIC24E family uses a 16-bit modified Harvard architecture, meaning the program and data buses are separate, enabling simultaneous instruction fetch and data access for higher throughput. Within the broader hierarchy, the PIC24EP sits between 8-bit PIC18 devices and 32-bit PIC32 parts, optimized for DSP-like workloads such as field-oriented control (FOC) loops while remaining easy to program in C. Key features include AEC-Q100 automotive qualification, an extended operating temperature range of -40C to +150C (H grade), and integrated op-amps that eliminate external analog conditioning stages for current sensing. A built-in 32-bit CRC engine, multiple communication interfaces (UART, SPI, I2C, ECAN), and 5 PWM modules (3 complementary pairs) support BLDC, PMSM, and stepper motor drive topologies with minimum external components. Typical applications include automotive HVAC blowers, electric vehicle auxiliary pumps, industrial servo drives, drone ESCs, and consumer appliances such as washing-machine direct-drive motors. The combination of small footprint, automotive-grade qualification, and integrated analog makes the PIC24EP128MC202-H/MM especially suited for space-constrained, reliability-critical motor nodes.

Cotización Contacto
PIC24EP128MC202-H/SP - 70 MIPS 16-Bit Motor Control MCU | Microchip
PIC24EP128MC202-H/SP

PIC24EP128MC202-H/SP - 70 MIPS 16-Bit Motor Control MCU | Microchip

The Microchip Technology PIC24EP128MC202-H/SP is a 16-bit microcontroller from the PIC24E family, purpose-built for high-performance precision motor control. Operating at up to 70 MIPS with a 70 MHz system clock, the device integrates 128 KB of Flash program memory, 16 KB of SRAM, and an enhanced peripherals set including a high-speed 10-bit ADC, dual 16-bit analog comparators with 4 ns response, four on-chip op-amps, and dedicated PWM modules with up to 14 output pairs optimized for motor drive. The -H/SP suffix designates the high-temperature (-40C to +150C operating junction range), SPDIP-28 package variant aimed at automotive and industrial motor-control systems. According to the manufacturer datasheet family description, the PIC24E motor control family targets energy-efficient, quieter, longer-life precision motor drives in field-oriented control (FOC) and trapezoidal commutation topologies. A 16-bit microcontroller (MCU) is an integrated processor core, program memory, data memory, and peripherals on a single silicon die. The PIC24E architecture extends the PIC24 instruction set with hardware DSP support, wider addressing for larger memory maps, and a peripheral engine capable of running high-resolution PWM and fast ADC conversions with deterministic latency. Within the broader hierarchy, PIC24E parts belong to the digital signal controller (DSC) sub-category, which combines MCU simplicity with selected DSP capabilities such as MAC operations, useful for motor-control math pipelines. Key features of the PIC24EP128MC202 include integrated op-amps that eliminate external signal-conditioning stages for current sensing, a 12-bit ADC capable of up to 1.1 Msps for fast loop sampling, four PWM channels with 7.14 ns resolution for low-ripple torque output, and a flexible PWM fault input with low-latency shutdown. The device also includes a charge time measurement unit (CTMU) for cap-touch and temperature sensing, a Real-Time Clock/Calendar, and multiple communication interfaces including I2C, SPI, and UART. The SPDIP-28 package and 1.8-3.6V Vdd range simplify PCB routing and integrate with both leaded and surface-mount designs via a socket. The architecture uses a modified Harvard structure with separate program and data paths, a 16-bit ALU, and a deterministic instruction pipeline. For motor-control loops, the high-speed PWM and fast ADC are tightly coupled through the peripheral trigger system, enabling deterministic sample-and-update sequencing critical for FOC execution within 1 microsecond. Typical applications include BLDC motor drives, PMSM field-oriented control, AC induction motor V/Hz drives, automotive HVAC blowers, e-bike controllers, and industrial servo amplifiers. The on-chip op-amps are particularly valuable for shunt-based current sensing. A key design consideration when using this device is ensuring PCB layout preserves analog signal integrity - separate analog and digital ground domains are strongly recommended due to the high-speed switching currents typical in motor-drive stages. Use the on-chip op-amps for current sensing rather than external amplifiers to minimize drift and BOM cost. This page synthesizes real-time distributor pricing, drop-in same-package alternatives, and practical design notes drawn from the PIC24EP128MC202 datasheet family. Where the manufacturer datasheet gives an information graph or typical application circuit, this page makes that content directly queryable for engineers.

Cotización Contacto