Microcontroladores

Productos (18740)

PIC24FJ64GA104T-I/ML - 64KB Flash 16-bit MCU 44-QFN | Microchip
PIC24FJ64GA104T-I/ML

PIC24FJ64GA104T-I/ML - 64KB Flash 16-bit MCU 44-QFN | Microchip

The Microchip Technology PIC24FJ64GA104T-I/ML is a 16-bit microcontroller from the PIC24F XLP family, featuring 64KB of Flash program memory, 8KB of RAM, and a 32MHz (16 MIPS) CPU core, all housed in a 44-pin QFN (8x8 mm) package with exposed pad. It is part of Microchip's nanoWatt XLP (eXtreme Low Power) family, designed for ultra-low-power applications with multiple low-power sleep modes and run-time current consumption under 1 mA/MIPS. A 16-bit microcontroller (MCU) is a microprocessor that processes data 16 bits at a time, providing higher computational throughput and richer peripherals than 8-bit devices while consuming less power than typical 32-bit Cortex-M parts. Within the taxonomy, the PIC24FJ belongs to the 16-bit MCU -> microcontroller -> embedded processor -> semiconductor hierarchy. Microchip's PIC24F family is widely adopted in industrial control, sensor hubs, and battery-powered consumer products where deterministic interrupt response, low sleep current, and small footprint matter more than raw MHz. Key features of the PIC24FJ64GA104 include: 64KB (22K x 24) self-programmable Flash with ECC, 8KB RAM, an integrated 16-channel 10-bit A/D converter with 500 ksps conversion rate, three analog comparators, four 16-bit timers, five I/O ports supporting up to 35 digital I/O, and rich serial peripherals including two UART, three SPI, and two I2C. The device supports a 2.0V to 3.6V operating range and offers multiple low-power modes including Sleep, Deep Sleep, and Retention modes with sub-µA currents. Architecturally, the PIC24FJ64GA104 uses a modified Harvard RISC core with 16-bit wide instructions, 24-bit instruction width, a hardware 16x16 multiplier, and a 32/16 hardware divider. The 8KB RAM includes dedicated DMA channels for data movement without CPU intervention, and the Peripheral Pin Select (PPS) remapping feature allows flexible assignment of digital peripherals to physical pins. nanoWatt XLP technology uses a combination of dynamic clock switching, deep sleep states, and intelligent peripheral gating to achieve run currents of approximately 8 µA/MIPS at 32 kHz and Deep Sleep currents below 100 nA. Typical applications include portable medical devices (glucose meters, pulse oximeters), IoT sensor nodes, battery-powered HVAC controls, industrial sensor hubs, and consumer products such as remote controls and e-metering. The wide operating voltage range (2.0V-3.6V) and low sleep currents also make it suitable for energy-harvesting designs where quiescent draw dominates the energy budget. When designing with this MCU, designers should pay close attention to the PPS configuration: unused peripheral-to-pin mappings must be locked or set to defaults to prevent current leakage. Programming is supported by Microchip's MPLAB X IDE with the free XC16 compiler and PICkit 3/4 or ICD 3/4 in-circuit debuggers. Code-compatible migration paths exist within the PIC24F family (e.g., PIC24FJ64GA102, PIC24FJ64GA004) for scaling Flash/RAM without layout changes. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC24FJ family, MPLAB toolchain references, and practical design notes that go beyond a single-datasheet overview, helping engineers select, source, and integrate the PIC24FJ64GA104T-I/ML faster.

Cotización Contacto
PIC24FJ64GA106-E/PT - 16-bit 32MHz MCU 64KB Flash | Microchip
PIC24FJ64GA106-E/PT

PIC24FJ64GA106-E/PT - 16-bit 32MHz MCU 64KB Flash | Microchip

The Microchip Technology PIC24FJ64GA106-E/PT is a 16-bit PIC24F microcontroller featuring 64KB of Flash program memory, 8KB of RAM, and a 32MHz internal MIPS operation speed, housed in a 64-pin TQFP (10x10 mm) package. It integrates a 16-bit modified Harvard RISC CPU core designed for high-performance, low-power embedded designs with deterministic interrupt handling. The device targets low-power (<100 nA standby current) and connectivity-rich applications, supporting multiple serial interfaces including up to 3x I2C, 3x SPI, and 4x UART channels, plus 23 independent timers for flexible peripheral scheduling. A microcontroller (MCU) is a single-chip computer containing a processor core, program and data memory, and programmable peripheral interfaces. The PIC24F family extends the classic PIC architecture into 16-bit modified Harvard territory with a wide 24-bit instruction word and 16-bit data path, enabling efficient C compilation while preserving the deterministic interrupt latency that made the PIC line famous. The PIC24FJ64GA106 sits inside Microchip's General Purpose Flash MCU portfolio, bridging small 8-bit PIC MCUs and the higher-end dsPIC family. Key specifications include 64KB (22K x 24) self-programmable Flash, 8KB RAM, a 10-bit ADC with multiple conversion channels, two analog comparators, hardware Real-Time Clock Calendar (RTCC), and a 16-bit wide parallel master port (PMP) for external bus connectivity. The device operates across a 2.0V to 3.6V supply range and offers enhanced Flash program memory endurance. Peripheral Pin Select (PPS) remapping is supported on most digital I/O, enabling flexible PCB routing without re-spinning the silicon. The PIC24FJ64GA106 is built on a low-power CMOS process and includes multiple power-saving modes including Sleep, Idle, and a deep Real-Time Clock-only mode that drops current draw below 100 nA. The integrated nanoWatt Technology features such as ultra-low-power wake-up sources, peripheral disable, and clock switching make this part particularly attractive for battery-backed and energy-harvesting products. Typical applications include industrial sensor hubs, portable medical devices, USB peripherals, human-machine interface (HMI) panels, automotive body electronics, secure access controls, and general-purpose embedded control. The wide peripheral mix and generous RAM buffer also suit graphics TFT displays, multi-protocol gateways, and IoT edge nodes. When designing with this MCU, allocate pin budget early because the 64-pin TQFP shares peripheral functions across pins and PPS remapping only resolves digital signals. Decoupling should follow Microchip's 100 nF near-VDD/VSS pairs plus a single bulk cap recommendation, and unused pins should be configured as outputs low to minimise parasitic current. This page synthesises distributor pricing, pin-compatible drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, including parameter tables, design considerations, and field engineering guidance for the PIC24FJ64GA106-E/PT.

Cotización Contacto
PIC24FJ64GA106-I/MR - 16-Bit 32MHz 64KB Flash MCU | Microchip
PIC24FJ64GA106-I/MR

PIC24FJ64GA106-I/MR - 16-Bit 32MHz 64KB Flash MCU | Microchip

The Microchip Technology PIC24FJ64GA106-I/MR is a 16-bit general-purpose flash microcontroller from the PIC24F family, featuring a 32 MHz MIPS16 CPU core, 64 KB of program flash, and 8 KB of RAM in a 64-pin VQFN (9x9 mm, MR) package with exposed thermal pad. It operates from 2.0V to 3.6V and integrates rich connectivity peripherals including 3x I2C, 3x SPI, 4x UART, and 23 independent timers, making it suitable for low-power (<100 nA standby) and connectivity-focused embedded applications. A PIC microcontroller is a compact programmable system-on-chip that integrates a CPU, non-volatile flash memory, RAM, and a configurable peripheral set into a single IC. PIC24F parts are mid-range 16-bit devices positioned between 8-bit PIC16/PIC18 devices and 32-bit PIC32 devices, and they belong to the broader microcontroller family within the power-managed semiconductor hierarchy: microcontroller -> embedded IC -> integrated circuit. They excel at low-power operation and mixed-signal integration. Key features of the PIC24FJ64GA106 include nanoWatt XLP technology for sub-100 nA sleep current, hardware Real-Time Clock and Calendar (RTCC), 16-channel 10-bit ADC, up to 84 I/O pins, and a USB 2.0 full-speed OTG controller on compatible variants. The 22K x 24 flash organization delivers 64 KB usable code storage, while the 16 KB RAM buffer supports demanding data processing. The device uses Microchip's proprietary nanoWatt XLP architecture, which combines multiple low-power operating modes with a 32 kHz auxiliary oscillator to extend battery life. Its CTMU peripheral supports touch sensing and precise time measurement, while the peripheral pin select (PPS) feature allows flexible remapping of digital functions onto most I/O pins, simplifying PCB layout. Typical applications include battery-powered sensor nodes, USB peripherals, HMI control panels, industrial data loggers, and consumer medical devices. The combination of large memory, abundant I/O, and low standby power makes it ideal for portable instrumentation. When designing with this MCU, place decoupling capacitors (100 nF + 1 uF) close to each VDD/VSS pair and use a 4-layer PCB if possible for the exposed pad to maintain a low junction-to-ambient thermal resistance. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
PIC24FJ64GA106-I/PT - 16-bit 32MHz 64KB Flash MCU | Microchip
PIC24FJ64GA106-I/PT

PIC24FJ64GA106-I/PT - 16-bit 32MHz 64KB Flash MCU | Microchip

The Microchip Technology PIC24FJ64GA106-I/PT is a 16-bit PIC24F general-purpose flash microcontroller based on the eXtreme Low Power (XLP) architecture, delivering 32 MHz (16 MIPS) performance from a 64 KB (22K x 24) program flash array. It is housed in a 64-pin TQFP (10 x 10 mm) package with an industrial -40C to +85C temperature rating, and provides 16 KB of RAM for data buffering in mixed-signal and connected designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (typically flash), volatile data memory (RAM), and a rich set of peripheral IP into one package. The PIC24F sub-family sits within Microchip's 16-bit MCU hierarchy above the 8-bit PIC16/PIC18 and below the dsPIC and 32-bit families, and is engineered for low-power (<100 nA standby current) connected applications. Within that hierarchy the 'GA1' pin-count family adds multiple serial ports, timers, and analog peripherals to the base PIC24F feature set. Key features of the PIC24FJ64GA106-I/PT include: 64 KB flash, 16 KB RAM, up to 32 MHz operation, three I2C and three SPI ports, four UART channels, 23 independent timers, a 16-channel 10-bit ADC, and a charge time measurement unit (CTMU). The CTMU enables capacitive-touch sensing, while the 10-bit ADC supports general analog conversion. These peripherals are exposed across the 64 TQFP pins, giving designers flexibility to map multiple communication buses simultaneously. Architecturally, the device uses a modified Harvard core with a 16-bit instruction word, 24-bit program address space, and a peripheral bus supporting DMA between memory and select peripherals. The XLP core minimizes dynamic power consumption and provides deep-sleep current below 100 nA, while the on-chip RTCC keeps calendar time across sleep states. The internal 8 MHz Fast RC oscillator with PLL can be selected for low BOM designs. Typical applications include low-power consumer and industrial sensor nodes, capacitive touch user interfaces, USB- and UART-connected embedded products, motor control peripherals, and battery-powered data loggers. The multiple UARTs and I2C/SPI buses make the part especially useful as a sensor hub. The 16 KB RAM buffer is large enough for Ethernet or display frame-buffer support when paired with a MAC/PHY or graphic controller. A key design consideration is the 2.5V/3.3V dual supply operation: the core logic runs from an internal regulator fed by VDD, while I/O pads are powered by a separate VDDCORE/VDDIO rail and tolerate up to 5V. Decoupling caps must be placed close to every VDD/VSS pair, and unused I/O must be configured as outputs low to minimize leakage. This page synthesizes distributor pricing, drop-in alternatives within the same 64-pin TQFP footprint, and practical design notes that complement the manufacturer datasheet with engineering-decision context.

Cotización Contacto
PIC24FJ64GA106T-I/PT - 16-bit 32MHz 64KB Flash MCU | Microchip
PIC24FJ64GA106T-I/PT

PIC24FJ64GA106T-I/PT - 16-bit 32MHz 64KB Flash MCU | Microchip

The Microchip Technology PIC24FJ64GA106T-I/PT is a 16-bit PIC24F microcontroller with 64 KB of Flash program memory and 16 KB of RAM, operating at up to 32 MHz (16 MIPS) in a 64-pin TQFP (10x10 mm) package. It is part of Microchip's PIC24F general-purpose family, targeting low-power (<100 nA standby current) and connectivity-rich applications, with 84 I/O pins across 53 general-purpose I/Os and multiple serial interfaces including 3x I2C, 3x SPI, 4x UART, IrDA, and LINbus. A 16-bit microcontroller is a CPU core that operates on 16-bit-wide data paths and registers, sitting architecturally between 8-bit MCUs and 32-bit ARM Cortex-M cores. The PIC24F family uses a modified Harvard RISC architecture with 16 working registers and 24-bit instruction words, delivering deterministic interrupt response and 16 MIPS performance at 32 MHz. Within the broader semiconductor taxonomy, PIC24F parts belong to the microcontrollers (MCU) class, which itself falls under embedded processors and microcontrollers, integrated circuits, and semiconductors. Compared with 32-bit Cortex-M0+ MCUs, PIC24F parts trade raw arithmetic throughput for lower active power, lower cost per pin, and simpler toolchains (MPLAB X + XC16). Key specifications include 64 KB (22K x 24) Flash, 16 KB SRAM, 84 I/O, 53 digital I/O pins, nanoWatt sleep modes, an internal 8 MHz RC oscillator with PLL support, multiple 16-bit and 32-bit timers/counters, a 10-bit 1 Msps ADC with up to 16 channels, and a 16-bit parallel master port on select pinouts. The I variant specifies the industrial -40C to +85C temperature range, and the T suffix denotes tape-and-reel packaging. Typical applications include industrial sensing and control nodes, USB-less human-interface devices, sensor hubs, automotive body/comfort LIN nodes, low-power data loggers, and portable consumer electronics. Its 53 I/O and 4xUART make it particularly well suited as a multi-protocol bridge or multi-sensor aggregator. The wide -40C to +85C industrial range also supports outdoor and factory-floor deployments. When designing with this part, ensure the selected oscillator mode matches the application's EMI and power budget, and verify that the 53 available I/Os are sufficient for your signal-routing needs (the 64-pin TQFP exposes a subset of the 84-pin device's peripheral pins). Program via ICSP using any MPLAB debugger (PICkit, ICD, MPLAB Snap). This page synthesizes distributor pricing (as of 2026-09-30), drop-in alternatives within the PIC24F family, and practical design notes not consolidated on any single distributor page.

Cotización Contacto
PIC24FJ64GA108-I/PT - 16-bit 32MHz MCU 64KB Flash TQFP-80
PIC24FJ64GA108-I/PT

PIC24FJ64GA108-I/PT - 16-bit 32MHz MCU 64KB Flash TQFP-80

The Microchip Technology PIC24FJ64GA108-I/PT is a 16-bit RISC microcontroller from the PIC24F family, operating at up to 32 MHz and integrating 64 KB of Flash program memory (22K x 24 instruction words) with 16 KB of RAM in an 80-pin TQFP (12x12 mm) package. Per the verified DigiKey listing, the device runs from a 2.0V to 3.6V supply and is specified across the -40C to +85C industrial temperature range, making it well suited for commercial and industrial embedded designs. A PIC24F microcontroller is a 16-bit modified-Harvard RISC device built around the PIC24 CPU core with 16 working registers, two Address Generation Units (AGUs) for simultaneous read/write data-memory addressing, and a C-friendly instruction set. Within the broader Microchip taxonomy the PIC24F sits between the 8-bit PIC16/PIC18 families and the 32-bit PIC32MX/DA families, and is targeted at low-power general-purpose designs where 16-bit DSP performance is needed without migrating to a 32-bit core. Key features of this part include up to 69 I/O pins, three I2C and three SPI serial ports, four UART modules, and 23 independent timers per the Microchip product family page, plus integrated peripherals such as a Real-Time Clock/Calendar (RTCC), 10-bit ADC, comparators and CTMU. The wide peripheral mix allows one device to handle HMI, multiple sensor buses and a wireless link without external glue logic, which reduces BOM cost and PCB area. The device is fabricated on a CMOS process and supports the nanoWatt XLP family of deep-sleep modes that take standby current below 100 nA, enabling battery-powered and energy-harvesting products. Memory is organized as 64 KB Flash and 16 KB RAM, providing generous headroom for protocol stacks such as USB, TCP/IP or BLE host libraries alongside application firmware. Typical applications include industrial sensor hubs, home-automation controllers, multi-protocol bridges (UART/SPI/I2C), low-power handheld instruments and connectivity gateways. Designers select this part when they need PIC24 instruction-set compatibility, ample RAM for buffers, and an industrial-grade 80-pin TQFP that is straightforward to route on a 4-layer PCB. When laying out the board, observe the manufacturer recommended decoupling (one 0.1 uF plus one 10 uF per VDD pin pair), keep MCLR traces short, and follow the PIC24FJ64GA108 datasheet ICSP connections if the design must support in-circuit programming through the same 80-TQFP footprint used in production. This page synthesizes distributor pricing, same-family drop-in alternatives and practical design notes that are not bundled in the manufacturer datasheet, giving engineers a faster path from evaluation to production.

Cotización Contacto
PIC24FJ64GA108T-I/PT - 16-bit 32MHz 64KB Flash MCU | Microchip
PIC24FJ64GA108T-I/PT

PIC24FJ64GA108T-I/PT - 16-bit 32MHz 64KB Flash MCU | Microchip

The Microchip Technology PIC24FJ64GA108T-I/PT is a 16-bit PIC24F microcontroller IC operating at 32MHz with 64KB (22K x 24) of Flash program memory and 16KB of RAM, housed in an 80-pin TQFP (12x12 mm) surface-mount package. It is part of the PIC24F General Purpose Flash Microcontroller family, designed for low-power (<100 nA standby current) and connectivity-rich applications. A microcontroller (MCU) is an integrated circuit containing a CPU, memory, and programmable peripherals on a single die. It is the central control element in embedded systems ranging from consumer appliances to industrial controllers. The PIC24F family specifically targets low-power and connectivity-rich applications, occupying the mid-range position in Microchip's 16-bit MCU portfolio between 8-bit PIC16/PIC18 and 32-bit PIC32 families. Key features of the PIC24FJ64GA108T-I/PT include 64KB Flash for firmware storage, 16KB SRAM for data buffering, three I2C and three SPI serial interfaces, four UART modules, 23 independent timers, and the NanoWatt power-saving technology that drops quiescent current below 100 nA in sleep modes. The 80-pin TQFP package exposes a generous I/O count, making the part suitable for applications requiring multiple peripheral channels in parallel. The PIC24FJ architecture combines a 16-bit modified Harvard CPU core with a wide range of digital and analog peripherals. On-chip debug, JTAG boundary scan, and ICSP (In-Circuit Serial Programming) simplify firmware development using Microchip's MPLAB X IDE and MPLAB Snap or PICkit programmers. Typical applications include industrial control panels, smart energy metering, USB-enabled embedded devices, sensor hubs, and low-power IoT edge nodes. The wide peripheral set reduces external component count and the low standby current extends battery life in portable products. When designing with this part, observe Microchip's recommended decoupling (one 100 nF ceramic per VDD pin plus a bulk 10 uF), keep analog and digital ground planes separated, and follow the datasheet's I/O-pin-mapped peripheral assignment tables to avoid pin-function conflicts. This page synthesizes distributor pricing, parametric drop-in alternatives from the same PIC24FJ64GA family, and practical design notes that go beyond the manufacturer datasheet to support BOM decisions for industrial and connectivity applications.

Cotización Contacto
PIC24FJ64GA110-E/PT - 16-Bit MCU, 64KB Flash, 100-TQFP | Microchip
PIC24FJ64GA110-E/PT

PIC24FJ64GA110-E/PT - 16-Bit MCU, 64KB Flash, 100-TQFP | Microchip

The Microchip Technology PIC24FJ64GA110-E/PT is a 16-bit microcontroller from the PIC24FJ family, integrating 64 KB of Flash program memory and 16 KB of RAM into a 100-pin TQFP package. The device executes instructions at a CPU speed of 32 MHz, yielding 16 MIPS throughput with its modified Harvard architecture and 16-bit data path. The part is rated for the extended industrial temperature range of -40C to +125C. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile data memory (RAM), and a rich set of peripheral blocks on one die. PIC24F devices sit in Microchip's 16-bit MCU portfolio, positioned between 8-bit PIC16/PIC18 parts and 32-bit PIC32 parts. They are used in applications that need more computational headroom than 8-bit cores can deliver while retaining low-power characteristics and a deterministic interrupt model. The PIC24FJ family further adds peripherals such as RTCC, Parallel Master Port, and multiple serial interfaces, broadening use cases into human-machine interfaces and connectivity products. The PIC24FJ64GA110-E/PT integrates 64 KB (22K x 24) Flash and 16 KB RAM, 85 general-purpose I/O pins, three I2C, three SPI, and four UART serial interfaces, and 23 independent timers including a Real-Time Clock/Calendar and a 16-bit timer/counter set. The 12-bit A/D converter provides up to 16 channels with 500 ksps conversion rate, while a 10-bit DAC and multiple analog comparators support mixed-signal designs. NanoWatt technology delivers a standby current under 100 nA, enabling battery-powered and energy-harvesting products. The architecture pairs a 16-bit data path with a 24-bit instruction word, supporting C and assembly development through MPLAB X IDE and MPLAB XC16 compiler. With its 85 I/O count and abundant peripherals, this MCU targets industrial automation controllers, medical patient monitors, automotive body and HMI subsystems, and low-power connected sensor nodes. The 100-TQFP (12x12 mm) package provides a low-profile surface-mount footprint compatible with standard PCB assembly lines. Consider the wide I/O count and 16 KB RAM when selecting this part. Designs requiring more Flash should step up to the PIC24FJ128 family, while designs needing USB-OTG or CAN should look at the PIC24FJ64GB/GC variants. The -E temperature suffix indicates an extended -40C to +125C operating range, distinct from the -I (-40C to +85C) suffix. This page consolidates distributor stock data, drop-in alternatives within the PIC24FJ family, and practical design notes that go beyond the manufacturer datasheet's parametric tables.

Cotización Contacto
PIC24FJ64GA110-I/PF - 16-bit MCU, 64KB Flash, 100-TQFP | Microchip
PIC24FJ64GA110-I/PF

PIC24FJ64GA110-I/PF - 16-bit MCU, 64KB Flash, 100-TQFP | Microchip

The Microchip Technology PIC24FJ64GA110-I/PF is a 16-bit RISC Flash microcontroller from the PIC24F family, delivering 16 MIPS at 32 MHz with 64 KB of program Flash and 16 KB of on-chip data RAM, housed in a 100-pin TQFP (14x14 mm) package. It belongs to the PIC24FJ64GA110 series which targets low-power (<100 nA standby current) and connectivity-rich general-purpose embedded applications, integrating 3x I2C, 3x SPI, 4x UART, and 23 independent timers alongside a 10-bit ADC and parallel master port. Background knowledge - what is a PIC24F microcontroller? The PIC24F is a 16-bit modified-Harvard RISC microcontroller family from Microchip Technology, sitting between the 8-bit PIC16/PIC18 families and the 16-bit dsPIC families in the Microchip portfolio. PIC24F devices use a 16-bit instruction word with 24-bit instruction encoding, deliver up to 16 MIPS performance, and are recognized for eXtreme Low Power (XLP) technology with nanoWatt sleep currents. They target the same role in the system hierarchy as Cortex-M0/M0+ parts from other vendors: low-power, cost-sensitive, connectivity-rich embedded control where an 8-bit core is too constrained but a full Cortex-M3/M4 is overkill. Key features include 64 KB (22K x 24) self-programmable Flash, 16 KB SRAM, a hardware Real-Time Clock and Calendar (RTCC) with calendar mode, a 16-channel 10-bit ADC with 500 ksps conversion rate, and the Peripheral Pin Select (PPS) remapping system that allows flexible assignment of digital peripherals to I/O pins. The device supports 2.0V to 3.6V single-supply operation and offers four power-managed modes: Run, Idle, Sleep with RTCC, and Deep Sleep. The PIC24FJ64GA110 uses a modified-Harvard architecture with separate 24-bit program and 16-bit data paths, hardware multiply/divide, and a 16-element working register array. The PPS subsystem maps digital peripheral functions (UART, SPI, I2C, timer outputs, interrupt inputs) onto selected RPn pins via configuration bits, simplifying PCB routing. The integrated RTCC with timestamp and tamper-detection features is uncommon in this class and reduces external RTC component count. Typical applications include low-power IoT sensor nodes, industrial HMI panels, USB-less consumer devices, motor control reference designs (with companion dsPIC), and connectivity-rich embedded control (UART/SPI/I2C bridges). The combination of 23 timers and four UARTs makes it well suited to multi-protocol gateway applications. The 100-TQFP package exposes all 85 I/O pins, enabling direct bus or parallel-master-port interfaces to external peripherals or external memory. Design consideration - when designing with this device, leverage the Peripheral Pin Select system to optimize PCB layout flexibility, but be aware that PPS remapping is set at runtime and must be re-initialized on every reset. For battery-powered applications, the Deep Sleep mode with RTCC retention provides the lowest quiescent current and is preferable over Idle or Run modes. The 100-TQFP package has a larger footprint than 64-pin variants - choose the 100-pin device only when its 85 I/O pins are genuinely required. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet alone, supporting component selection for both new designs and legacy system maintenance.

Cotización Contacto
PIC24FJ64GA110T-I/PF - 16-bit 32MHz 64KB Flash MCU | Microchip
PIC24FJ64GA110T-I/PF

PIC24FJ64GA110T-I/PF - 16-bit 32MHz 64KB Flash MCU | Microchip

The Microchip Technology PIC24FJ64GA110T-I/PF is a 16-bit PIC24F microcontroller running at 32 MHz with 64 KB (22K x 24) of Flash program memory, packaged in a 100-pin TQFP (14x14 mm) industrial-temperature variant supplied on tape and reel. It integrates 16 channels of 10-bit ADC, up to 85 general-purpose I/O pins, and peripherals including Brown-out Detect/Reset, LVD, POR, PWM, and WDT for robust embedded control. The part carries the -I industrial temperature grade (-40C to +85C) and is part of the PIC24FJ256GA110 family datasheet covering 64 KB to 256 KB Flash variants. A 16-bit microcontroller (MCU) is a programmable computing device that uses a 16-bit data path and instruction word to balance code density, deterministic behaviour, and peripheral integration for embedded systems. PIC24F devices sit in Microchip's 16-bit portfolio between 8-bit PIC16/PIC18 parts and 32-bit PIC32 parts, and they belong to the broader microcontroller > microcontroller IC > semiconductor taxonomy. The 16-bit architecture delivers higher MIPS per MHz than 8-bit cores while remaining easier to learn and tool than 32-bit ARM Cortex-M parts, making PIC24F a common choice for cost-sensitive, low-power, mixed-signal designs. Key features include 32 MHz operation delivering up to 16 MIPS, 64 KB Flash / 16 KB RAM, integrated 16-channel 10-bit ADC, up to 85 GPIO, and multiple serial interfaces (3x I2C, 3x SPI, 4x UART) plus 23 independent timers per the PIC24FJ256GA110 family datasheet. The nanoWatt technology label indicates deep-sleep currents below 100 nA for battery-backed applications. Compared with PIC24FJ128 variants this part uses half the Flash and so is positioned for budget-constrained designs that do not need 128 KB. Architecturally, the PIC24FJ64GA110T-I/PF uses a modified Harvard core with separate program and data buses, a hardware multiply/divide unit, and a peripheral engine capable of running PWM, ADC, and communication blocks independently of the CPU. The 100-TQFP package exposes most pins as GPIO and as alternate-function peripheral mappings, enabling large mixed-signal designs with both analog sensing and digital I/O. Industrial-grade silicon and the 16 MIPS throughput make it suitable for real-time control loops such as BLDC motor commutation, sensor fusion front-ends, and human-interface subsystems. Typical applications include industrial sensor hubs, BLDC and stepper motor control, USB-aware human-interface panels, and low-power remote sensor nodes. Designers also use this family for graphical displays, multi-protocol bridges, and medical/consumer devices that need more than an 8-bit MCU but do not justify a 32-bit part. The tape-and-reel -T suffix indicates factory packaging for SMT assembly lines, and the -I grade supports commercial-to-industrial enclosures. This page synthesises DigiKey distributor pricing, drop-in same-package alternatives from the PIC24F family, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
PIC24FJ64GA110T-I/PT - 64KB Flash 16-bit MCU, 100-TQFP | Microchip
PIC24FJ64GA110T-I/PT

PIC24FJ64GA110T-I/PT - 64KB Flash 16-bit MCU, 100-TQFP | Microchip

The Microchip Technology PIC24FJ64GA110T-I/PT is a 16-bit microcontroller from the PIC24FJ family, featuring 64KB of Flash program memory (22K x 24), 8KB of RAM, and 84 general-purpose I/O pins in a 100-pin TQFP package. It operates at up to 32 MHz (16 MIPS) with a wide 2.0V-3.6V supply range and integrated nanoWatt power management for low-power applications. A microcontroller (MCU) is a single-chip computer containing a CPU core, Flash/ROM program memory, SRAM data memory, timers, communication peripherals, and I/O. The PIC24FJ family uses a 16-bit modified Harvard RISC architecture with DSP extensions, making it a mid-range upgrade over 8-bit PIC16/PIC18 parts while staying below the cost of 32-bit ARM Cortex-M0 MCUs. It sits in the hierarchy: PIC24FJ -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. Key features of the PIC24FJ64GA110T-I/PT include 16 channels of 10-bit ADC (500 ksps), two UART, two SPI, two I2C peripherals, five 16-bit timers, an RTCC, and a Parallel Master Port (PMP) for external memory or graphics interfaces. The integrated nanoWatt technology provides multiple power-saving modes (Idle, Sleep, Deep Sleep) with on-the-fly clock switching, ideal for battery-powered designs. The 100-TQFP package offers generous pin count for complex human-machine interface (HMI) and sensor-fusion designs. The 16-bit core with single-cycle multiply and hardware divide delivers deterministic interrupt response and DSP-class MAC operations, simplifying motor-control and digital-filter code versus 8-bit alternatives. The peripheral pin-select (PPS) feature allows flexible remapping of digital peripherals to any I/O, simplifying PCB layout in dense designs. On-chip CTMU enables touch sensing and capacitive proximity measurement. Typical applications include industrial control panels, medical monitoring devices, USB embedded hosts (with external PHY), graphical user interfaces via PMP, motor control (BLDC, stepper), and consumer white goods. The wide memory and peripheral mix also suits building automation, HVAC controllers, and smart-meter designs. When designing with this part, reserve adequate ground and VDD decoupling (100 nF + 10 µF bulk per pair) within 5 mm of each power pin. Use ICSP programming headers on every prototype for field updates; the PGECx/PGEDx pairs are mapped to fixed pin pairs. This page synthesizes Microchip datasheet specs, distributor stock, drop-in 100-TQFP alternatives, and practical design notes not found in the standard datasheet, enabling faster BOM validation and second-sourcing decisions.

Cotización Contacto
PIC24FJ64GA202-E/SO - 16-bit 32MHz 64KB Flash MCU | Microchip
PIC24FJ64GA202-E/SO

PIC24FJ64GA202-E/SO - 16-bit 32MHz 64KB Flash MCU | Microchip

The Microchip Technology PIC24FJ64GA202-E/SO is a 16-bit PIC24F microcontroller featuring 64 KB Flash, 8 KB RAM, an integrated crypto module, and Microchip's eXtreme Low Power (XLP) technology, housed in a 28-pin SOIC package rated for the -40C to +125C extended temperature range. It runs at up to 32 MHz, integrates 21 general-purpose I/O, and operates from a 2.0V to 3.6V supply. A microcontroller (MCU) is a single-chip computer containing a CPU, program memory (Flash), data memory (RAM), peripherals, and I/O. The PIC24F family is a 16-bit modified Harvard architecture MCU line from Microchip that targets low-power and cost-sensitive embedded designs, sitting in the broader taxonomy: PIC24F -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor. The 'GA2' sub-family specifically adds an integrated crypto engine for secure applications and Core Independent Peripherals (CIPs) for offloading CPU tasks. Key features include eXtreme Low Power (XLP) operation with multiple sleep modes and sub-microamp standby currents, an integrated crypto module, 21 GPIO pins, multiple timers, a 10/12-bit ADC, and standard serial interfaces (UART, SPI, I2C). The 64 KB Flash supports self-programming, and 8 KB RAM is sufficient for typical sensor-fusion and protocol-stack workloads. The device is engineered for low-power embedded and IoT designs. The architecture combines a 16-bit modified-Harvard core with a hardware crypto accelerator (AES) and CIPs that handle I/O events without wake-up, enabling deterministic low-power behaviour. Core Independent Peripherals such as Configurable Logic Cells and DMA-equivalent peripheral engines let developers build responsive event-driven designs without CPU intervention. Typical applications include IoT sensor nodes, secure connected devices, battery-powered wearables, low-power industrial sensors, consumer electronics with secure firmware, and metering devices. The integrated crypto engine simplifies secure boot, secure firmware update, and authenticated communication. For higher pin count or more memory, the related PIC24FJ128GA202 or PIC24FJ64GA306 families extend within the same architecture. This page synthesizes distributor pricing, drop-in package-compatible alternatives, and practical design notes not found in the standalone datasheet.

Cotización Contacto
PIC24FJ64GA202-I/MM - 64KB Flash 16-bit XLP MCU | Microchip
PIC24FJ64GA202-I/MM

PIC24FJ64GA202-I/MM - 64KB Flash 16-bit XLP MCU | Microchip

The Microchip Technology PIC24FJ64GA202-I/MM is a 16-bit PIC® XLP™ 24F flash microcontroller featuring an integrated hardware crypto engine, 64KB (64K x 8) of flash program memory and 8KB of RAM. It operates at a CPU clock speed of up to 32MHz and is housed in a 28-pin QFN-S (6x6 mm) package with an exposed thermal pad. A 16-bit microcontroller (MCU) is an embedded processor core that fetches, decodes and executes 16-bit-wide instructions, sitting in the hierarchy between 8-bit microcontrollers (lower code density, slower arithmetic) and 32-bit microcontrollers / application processors (higher performance, higher cost). PIC24F MCUs use a modified Harvard RISC architecture that delivers higher code density and faster context switching than 8-bit PICs while keeping power consumption low. Key features of the PIC24FJ64GA202-I/MM include the integrated crypto module (AES/DES/SHA support), eXtreme Low Power (XLP) technology with sub-microamp sleep currents, multiple serial interfaces (UART, SPI, I2C), a real-time clock calendar (RTCC), a 10-bit A/D converter with up to 9 input channels, and up to 21 general-purpose I/O pins. The 28-pin QFN package supports low-pin-count, space-constrained PCB designs. Architecturally the device pairs a 16-bit CPU core with a wide peripheral set including 5 16-bit timers, an input capture module, output compare modules and an enhanced parallel master/slave port. The hardware crypto engine accelerates AES-128/192/256 and SHA-1/SHA-256, offloading encryption tasks from the CPU and reducing firmware complexity for secure applications. Typical applications include IoT sensor nodes, secure authentication tokens, low-power remote controls, medical wearables, smart meters and industrial data loggers. The wide 2.0V to 3.6V VDD operating range and XLP modes make the device especially attractive for battery-powered designs that must sleep for years on a primary cell. Design consideration: the 28-QFN exposed pad must be soldered to the PCB ground plane to meet thermal and electrical performance. Without proper pad soldering the device may exhibit higher junction temperature and degraded EMI behavior. For cryptographic use, follow Microchip application notes on key storage and RNG seeding.

Cotización Contacto
PIC24FJ64GA202T-I/MM - 16-bit 32MHz 64KB Flash MCU | Microchip
PIC24FJ64GA202T-I/MM

PIC24FJ64GA202T-I/MM - 16-bit 32MHz 64KB Flash MCU | Microchip

The Microchip Technology PIC24FJ64GA202T-I/MM is a 16-bit microcontroller from the PIC24F XLP family, delivering 32 MHz CPU performance with 64 KB Flash and 8 KB RAM in a 28-pin QFN-S (6x6 mm) package with exposed thermal pad. It integrates a hardware crypto engine, key storage, and a true random number generator (RNG), while consuming only nanoWatt XLP sleep currents for battery-powered designs. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), working RAM, and a rich set of peripherals such as ADC, timers, communication interfaces, and I/O. The PIC24F belongs to the 16-bit modified Harvard architecture family, sitting above 8-bit PIC16/PIC18 devices in performance but below the 32-bit PIC32MX/SAM families in raw throughput. The "FJ" prefix denotes Flash program memory and the "GA2" device group indicates the General-purpose Application variant with enhanced peripherals and the integrated crypto accelerator. Key features include 64 KB self-programmable Flash, 8 KB SRAM, 16-bit modified Harvard core with single-cycle 16x16 MAC, 32 MHz operation (8 MIPS), eXtreme Low Power (XLP) technology with deep Sleep and retention modes, an integrated AES/DES crypto engine with key storage and RNG, a 12-bit ADC up to 500 ksps, multiple UART/SPI/I2C interfaces, and a Real-Time Clock/Calendar (RTCC). The 28-QFN-S package exposes most I/O and keeps the footprint to just 6x6 mm. Architecturally, the device pairs a 16-bit RISC-like CPU with a flexible peripheral set controlled through Peripheral Pin Select (PPS). The on-chip crypto block offloads AES/DES/SHA workloads from the core and protects key material in tamper-resistant storage, an unusual feature for an MCU in this footprint and price class. The 3.3 V typical supply with 2.0–3.6 V operating range allows direct Li-ion/battery connection with internal regulation. Typical applications include secure IoT sensor nodes, low-power wireless edge devices (BLE/Zigbee host), secure token generators, smart meters, medical wearables, and portable instrumentation requiring authenticated firmware or encrypted data logging. The QFN package and 6x6 mm footprint also suit compact security accessories such as USB tokens. When designing with this MCU, ensure adequate decoupling (100 nF + bulk 1–10 uF near VDD/AVDD), keep the analog supply separate for best ADC SNR, and use the PPS feature to map peripherals to pins without rewiring the board. The exposed thermal pad must be soldered to the ground plane for mechanical and thermal performance. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
PIC24FJ64GA202T-I/SO - 16-bit 32MHz 64KB Flash MCU | Microchip
PIC24FJ64GA202T-I/SO

PIC24FJ64GA202T-I/SO - 16-bit 32MHz 64KB Flash MCU | Microchip

The Microchip Technology PIC24FJ64GA202T-I/SO is a 16-bit PIC® XLP™ 24F microcontroller featuring 64KB Flash, 8KB RAM, integrated hardware crypto engine, and a 32MHz core operating speed, housed in a 28-pin SOIC (7.50mm width) package. It combines an eXtreme Low-Power architecture with on-chip data security primitives (key storage, AES crypto engine, and true random number generator) for connected, battery-powered embedded designs. Operating voltage spans 2.0V to 3.6V across the industrial -40C to +85C range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and a rich set of programmable peripherals on one die. The PIC24F family occupies the 16-bit tier of Microchip's PIC portfolio above the 8-bit PIC16/PIC18 families and below the 32-bit PIC32 families, offering higher computational throughput than 8-bit MCUs while retaining a low power envelope and a deterministic Harvard architecture optimized for real-time control. Key features of the PIC24FJ64GA202 include a 16-channel 10/12-bit ADC with up to 500 ksps conversion rate, multiple serial interfaces (UART, SPI, I2C), five 16-bit timers, hardware crypto acceleration (AES, DES, 3DES, SHA, MD5, RNG), and Microchip's eXtreme Low-Power (XLP) technology that delivers sleep currents below 1 uA. The integrated crypto engine and secure key storage eliminate the need for an external security IC in many IoT edge nodes, simplifying BOM and shrinking PCB area. Typical applications include low-power IoT sensor nodes with secure wireless uplinks, battery-powered smart locks and access controllers, secure medical wearables, industrial sensor hubs with authenticated telemetry, and consumer devices requiring firmware authentication. The wide 2.0V-3.6V input range enables direct connection to single-cell Li-ion (2.7V-4.2V regulated) or 2xAA battery stacks (2.0V-3.2V direct). When designing with this device, allocate one dedicated I/O pin as the ICSP programming interface (PGDx/PGECx) and reserve the MCLR reset pin as an input-only or as a controlled reset. The on-chip crypto peripherals consume additional code space and RAM; reserve at least 6KB of Flash for a typical application using AES + RNG + a real-time RTOS or state machine. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet. Compare the PIC24FJ64GA202 against the PIC24FJ64GA002, PIC24FJ32GA102, and PIC24FJ128GB202 to weigh Flash density, peripheral count, and crypto features before committing to a design.

Cotización Contacto
PIC24FJ64GA204-E/ML - 16-bit 32MHz MCU w/Crypto 64KB Flash QFN-44 | Microchip
PIC24FJ64GA204-E/ML

PIC24FJ64GA204-E/ML - 16-bit 32MHz MCU w/Crypto 64KB Flash QFN-44 | Microchip

The Microchip PIC24FJ64GA204-E/ML is a 16-bit eXtreme Low Power (XLP) microcontroller with an integrated crypto engine, 64KB Flash, 8KB RAM, and a maximum CPU speed of 32MHz, packaged in a 44-pin QFN (8x8 mm) with exposed thermal pad. It operates from 2.0V to 3.6V and is rated -40C to +125C for industrial/automotive temperature environments. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and programmable peripherals. The PIC24FJ family belongs to the broader category of microcontrollers -> embedded processors -> 16-bit microcontrollers -> low-power MCUs -> semiconductor ICs. Microchip's PIC24F line targets cost-sensitive, ultra-low-power embedded applications requiring deterministic interrupt response and rich peripheral integration. Key features of the PIC24FJ64GA204-E/ML include a hardware crypto engine for AES/DES/3DES/SHA/MD5/CRC, 16-bit modified Harvard architecture with single-cycle multiply, a 10/12-bit ADC (varies by device), up to 35 I/O pins, and 5 CCP/ECCP modules supporting PWM, capture, and compare. The XLP Sleep mode draws as low as 20 nA typical, making the part suitable for battery-powered and energy-harvesting designs. The device leverages Microchip's nanoWatt XLP technology to optimize active and idle current consumption. With 64KB of self-programmable Flash and 8KB SRAM, the PIC24FJ64GA204-E/ML is well suited for applications requiring local data logging, secure communication stacks, or crypto-accelerated transactions. The integrated crypto engine offloads encryption operations from the CPU, freeing cycles for application logic and reducing latency in TLS/DTLS handshakes and RFID authentication. Typical applications include secure IoT edge nodes, low-power wireless sensor platforms, smart metering, wearable medical devices, and automotive body electronics. The wide operating voltage and industrial temperature range allow deployment in harsh environments including outdoor industrial and in-cabin automotive systems. When designing with this device, allocate PCB copper under the exposed thermal pad for heat dissipation and use decoupling capacitors (typically 100nF plus 4.7uF bulk) close to the VDD/AVDD pins. The crypto engine uses dedicated RAM buffers; designers should reserve Flash pages 0-1 for the secure bootloader when implementing firmware-update workflows. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that are not aggregated on any single manufacturer page, helping engineers select, source, and integrate the PIC24FJ64GA204-E/ML with confidence.

Cotización Contacto
PIC24FJ64GA204-E/PT - 16-bit 64KB Flash MCU w/ Crypto | Microchip
PIC24FJ64GA204-E/PT

PIC24FJ64GA204-E/PT - 16-bit 64KB Flash MCU w/ Crypto | Microchip

The Microchip PIC24FJ64GA204-E/PT is a 16-bit RISC microcontroller featuring an integrated crypto module and eXtreme Low Power (XLP) technology, housed in a 44-pin TQFP (PT) package with 64KB of Flash program memory and 8KB of RAM. It operates from a 2.0V to 3.6V supply, targets automotive and industrial embedded applications, and integrates a hardware AES/DES crypto engine for secure communication. What is a PIC24 microcontroller? The PIC24 family is Microchip's 16-bit RISC MCU portfolio, sitting between the 8-bit PIC16/PIC18 lines and the 32-bit PIC32 line. PIC24F devices use the modified Harvard architecture with a 16-bit data path, addressing up to 8MB of linear program space via a 24-bit instruction word. They are widely adopted in low-power, mixed-signal embedded designs that require more computational headroom than 8-bit MCUs but simpler toolchains than 32-bit ARM Cortex-M parts. Key features of the PIC24FJ64GA204-E/PT include 64KB self-programmable Flash, 8KB SRAM, an integrated crypto accelerator (AES, DES, 3DES, SHA, MD5, and HMAC engines), eXtreme Low Power modes with sub-uA sleep currents, multiple serial interfaces (UART, SPI, I2C), 10-bit ADC channels, and CTMU for capacitive touch sensing. The 44-pin TQFP package provides ample I/O for medium-complexity designs while remaining hand-solderable for prototyping. The PIC24FJ64GA204-E/PT is part of Microchip's General Purpose PIC24F family. The 'J' suffix denotes the low-power F-series. The -E temperature grade extends the operating range to -40C to +125C, qualifying it for automotive and harsh industrial environments. The integrated crypto engine eliminates the need for an external security IC, reducing both BOM cost and PCB area in IoT, smart energy, and connected sensor applications. Typical applications include secure IoT nodes, smart meters, automotive body controllers, industrial sensor hubs, and battery-powered wearables where both low quiescent current and hardware-accelerated cryptography are required. The on-chip crypto engine is particularly valuable for TLS/DTLS handshakes on resource-constrained edge devices. When designing with this part, allocate dedicated I/O for the crypto module's key storage and ensure the integrated charge pump has sufficient decoupling. Designers migrating from PIC24FJ64GA104 or PIC24FJ64GA004 gain cryptographic acceleration with otherwise similar peripheral sets. This page synthesizes distributor pricing, pin-compatible drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet, supporting faster BOM decisions for automotive and industrial designers.

Cotización Contacto
PIC24FJ64GA204-I/ML - 16-bit 32MHz 64KB Flash MCU | Microchip
PIC24FJ64GA204-I/ML

PIC24FJ64GA204-I/ML - 16-bit 32MHz 64KB Flash MCU | Microchip

The Microchip Technology PIC24FJ64GA204-I/ML is a 16-bit PIC® XLP™ 24F microcontroller with 64KB Flash, 8KB RAM, and an integrated crypto engine, operating at up to 32MHz in a 44-pin QFN (8x8mm) package with exposed thermal pad. The device features eXtreme Low Power (XLP) technology with sleep currents in the nanoampere range, making it ideal for battery-powered and energy-harvesting applications where every microwatt matters. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals including timers, communication interfaces, and analog blocks. The PIC24F family sits in Microchip's 16-bit MCU hierarchy: PIC24F -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor. It targets applications needing more performance and memory than 8-bit PIC MCUs while retaining low power consumption and a moderate price point. Key features include a 16 MIPS modified Harvard CPU core, 64KB self-programmable Flash, 8KB RAM, 13-channel 12-bit ADC, 6 PWM channels, 6 DMA channels, multiple UART/SPI/I2C interfaces, and a hardware crypto engine for AES/SHA operations. The integrated crypto accelerator offloads secure communication tasks from the CPU, enabling efficient TLS-style handshakes in IoT edge nodes. Architecturally, the PIC24FJ64GA204 uses Microchip's nanoWatt XLP technology with multiple low-power modes (Sleep, Deep Sleep, Retention). The crypto engine is tightly coupled to the data bus and supports AES-128/192/256 and SHA-256 hashing, freeing CPU cycles for application code and reducing overall system power. Typical applications include IoT sensor nodes, secure wireless endpoints, low-power wearables, smart meters, home automation controllers, and industrial HMI panels. The combination of low power, integrated crypto, and ample memory suits connected devices that must communicate securely over long battery life. When designing with this part, plan a robust decoupling network (100nF + 10uF near VDD) and follow Microchip's PCB layout guidelines for the QFN exposed pad to ensure thermal performance and EMI compliance. Use the MPLAB X IDE with the XC16 compiler for firmware development, and leverage the PIC24F peripheral library to reduce time-to-market. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC24FJ family, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
PIC24FJ64GA204T-I/ML - 64KB Flash 16-bit MCU w/ Crypto | Microchip
PIC24FJ64GA204T-I/ML

PIC24FJ64GA204T-I/ML - 64KB Flash 16-bit MCU w/ Crypto | Microchip

The Microchip PIC24FJ64GA204T-I/ML is a 16-bit PIC24F microcontroller from the XLP™ family, integrating 64 KB of Flash program memory, 8 KB of RAM, and a hardware cryptographic engine, all in a 44-pin QFN (8x8 mm) package with an exposed thermal pad. It operates from 2.0V to 3.6V and runs up to 32 MIPS at 32 MHz CPU clock, making it suitable for low-power and security-sensitive embedded designs. A 16-bit microcontroller (MCU) is a programmable processor core that executes instructions at 16-bit word width, sitting between 8-bit MCUs (lower performance, lower cost) and 32-bit ARM Cortex-M MCUs (higher performance, higher power). The PIC24F family uses a modified Harvard architecture with separate program and data buses, enabling simultaneous instruction fetch and data access. As part of the broader category hierarchy MCU → microcontroller → embedded processor → semiconductor, PIC24F targets mid-range applications that need more compute than 8-bit PIC MCUs but lower power and BOM cost than 32-bit ARM parts. Key features of the PIC24FJ64GA204T-I/ML include a hardware crypto engine with AES/DES/SHA support, random number generator, and secure key storage, delivering up to 16 MIPS at 32 MHz. It integrates 64 KB self-programmable Flash, 8 KB SRAM, multiple timers, UART/SPI/I²C interfaces, a 10/12-bit ADC, and eXtreme Low Power (XLP) sleep modes that drop quiescent current below 1 µA, ideal for battery-powered secure nodes. The device combines a 16-bit modified-Harvard CPU with dedicated crypto peripherals and rich analog/digital peripherals on the same die. This integrated approach reduces BOM count and PCB area compared to discrete MCU plus external crypto IC designs, while preserving the low-power advantages of the PIC24F XLP architecture. Typical applications include IoT secure end nodes, smart sensors with authenticated firmware updates, industrial data loggers with secure storage, medical wearable monitors, and wireless sensor networks. The hardware crypto engine accelerates TLS/DTLS handshakes and secure boot verification on edge devices. When designing with this MCU, ensure VDDCORE decoupling follows the datasheet reference layout - typically a 10 µF bulk plus 0.1 µF ceramic on each VDD pin. The 'T' suffix in the MPN indicates tape-and-reel packaging and the 'I' suffix denotes the -40 °C to +85 °C industrial temperature grade. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto
PIC24FJ64GA306-I/PT - 16-bit 32MHz 64KB Flash XLP MCU | Microchip
PIC24FJ64GA306-I/PT

PIC24FJ64GA306-I/PT - 16-bit 32MHz 64KB Flash XLP MCU | Microchip

The Microchip Technology PIC24FJ64GA306-I/PT is a 16-bit PIC24F microcontroller with nanoWatt XLP technology, delivering 32 MHz / 16 MIPS performance from 64 KB of Flash and 8 KB of RAM in a 64-pin TQFP (PT) package measuring 10x10 mm. The device is part of the 64/80/100-pin general-purpose PIC24F family with integrated LCD controller and ultra-low-power features including a Low-Voltage Sleep mode that maintains state and RAM at a typical current of 340 nA. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and a rich set of peripherals such as timers, communication interfaces, and analog blocks. Within the broader taxonomy, the PIC24FJ64GA306 sits in the 16-bit MCU category - between 8-bit PIC16/PIC18 parts and 32-bit PIC32 parts - and within Microchip's hierarchy it belongs to the PIC24F XLP family of low-power microcontrollers. This positioning gives designers a balance of deterministic 16-bit performance and battery-friendly sleep current. Key features include 64 KB Flash organized as 22K x 24 words, 8 KB RAM, up to 53 general-purpose I/O pins, six DMA channels for offloading the CPU, and up to 16 channels of 12-bit A/D conversion with 10-bit A/D option. Connectivity peripherals cover I2C, SPI, UART/USART, IrDA and LIN, while dedicated peripherals include Brown-out Detect/Reset, POR, PWM, WDT, LCD controller, and RTCC with VBAT backup. The 32 MHz oscillator drives the 16 MIPS pipeline; operation spans 2.0 V to 3.6 V across the -40C to +85C industrial temperature range. Architecturally, the device uses a modified Harvard core with separate program and data paths, allowing concurrent fetch and access. XLP technology combines multiple power management modes (Sleep, Deep Sleep, Low-Voltage Sleep with RTCC) and a fast wake-up from 1.6 us to deliver nano-amp sleep currents with active-mode run currents in the mA range, enabling years of battery life on coin cells or two-AA packs. Typical applications include industrial HMI panels with segment-LCD displays, medical monitoring devices, energy metering, battery-powered sensor nodes, home appliances with LCD user interfaces, and automotive body/comfort modules. The integrated LCD controller removes the need for an external driver for segment displays up to a few hundred segments. Designers should note that the 'I' suffix denotes the industrial -40C to +85C temperature grade and the 'PT' suffix denotes the 64-pin TQFP package. When migrating within the PIC24FJ64GA3xx family, pinout is shared across -64-, -80- and -100-pin variants of the same die, enabling easy PCB re-spins with the same firmware. This page synthesizes distributor pricing, drop-in same-package alternatives drawn from Microchip's own PIC24FJ64GA3xx family, and practical design notes that go beyond a re-statement of the manufacturer datasheet.

Cotización Contacto
PIC24FJ64GA306T-I/MR - 16-bit 32MHz 64KB Flash MCU 64-VQFN | Microchip
PIC24FJ64GA306T-I/MR

PIC24FJ64GA306T-I/MR - 16-bit 32MHz 64KB Flash MCU 64-VQFN | Microchip

The Microchip Technology PIC24FJ64GA306T-I/MR is a 16-bit microcontroller from the PIC24F XLP family featuring 64 KB (22K x 24) of Flash program memory and 8 KB of RAM, integrated into a 64-pin VQFN (9x9 mm) package with 85 configurable I/O pins. It executes up to 16 MIPS at 32 MHz from a 2.0V to 3.6V supply, leveraging a modified Harvard architecture for deterministic single-cycle instruction execution and deterministic interrupt latency. A 16-bit microcontroller is a single-chip computer that uses an internal data path 16 bits wide, enabling more efficient arithmetic on larger integers and richer peripheral addressing than 8-bit cores while retaining low power consumption. PIC24F microcontrollers sit within the broader hierarchy of microcontroller -> embedded controller -> semiconductor; the FJ sub-family adds nanoWatt XLP technology and integrated LCD driver support, positioning this device for low-power human-machine interface designs. Key features include nanoWatt XLP technology with a Low Voltage Sleep current of approximately 340 nA that retains RAM and core state, a real-time clock and calendar (RTCC) module, a 10-bit ADC capable of up to 500 ksps, multiple UART/SPI/I2C peripherals, and a dedicated LCD segment driver interface. The CTMU charge-time measurement unit enables touch sensing and capacitance measurement, while a 16-bit parallel master port and EPMP support external bus expansion for graphics or memory. Architecturally, the PIC24FJ64GA306T-I/MR pairs a wide 16-bit ALU with a 24-bit instruction word to balance code density and execution speed. The integrated voltage regulator supports operation down to 2.0V, and the peripheral pin select (PPS) feature allows digital peripheral I/O to be remapped to most general-purpose pins, simplifying PCB routing. Hardware crypto and unique MAC address support are absent on this part; cryptographic options are addressed by separate PIC24Fxx and dsPIC33 families. Typical applications include battery-powered IoT sensor nodes, portable medical monitors, smart metering with LCD readouts, industrial HMI panels, USB peripherals using an external transceiver, and low-power remote controls. The wide operating temperature range of -40C to +85C makes the device suitable for industrial and outdoor installations. When designing with this device, ensure that Vcap decoupling is provided per datasheet recommendations and that unused I/O pins are configured as outputs to minimize transient current. PPS configuration should be locked early in initialization to prevent bus contention during bootstrap. This page synthesizes distributor pricing tiers, drop-in same-family alternatives, and practical low-power design notes that are not consolidated in the manufacturer datasheet, providing a faster engineering reference for embedded BOM and lifecycle decisions.

Cotización Contacto
PIC24FJ64GA308T-I/PT - 64KB Flash 16-bit MCU 80-TQFP | Microchip
PIC24FJ64GA308T-I/PT

PIC24FJ64GA308T-I/PT - 64KB Flash 16-bit MCU 80-TQFP | Microchip

The Microchip Technology PIC24FJ64GA308T-I/PT is a 16-bit PIC24F microcontroller featuring nanoWatt XLP eXtreme Low Power technology, 64KB of flash program memory (22K x 24), 8KB of RAM, and 69 I/O pins, packaged in an 80-pin TQFP (12x12 mm). It operates up to 32 MHz delivering 16 MIPS performance, integrates a segmented LCD controller, and offers a deep Sleep current of approximately 340 nA with full RAM retention plus a dedicated VBAT pin for RTC backup. A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory (typically flash), volatile data memory (RAM), and a rich set of on-chip peripherals such as timers, ADCs, communication interfaces, and I/O. The PIC24F family is Microchip's 16-bit Modified Harvard architecture line, positioned between the 8-bit PIC16/PIC18 families and the 32-bit PIC32MX/DA families, and is widely used in consumer, industrial, and battery-powered embedded applications. The "FJ" suffix denotes the flash-based, nanoWatt XLP ultra-low-power variant family. Key features include 64KB (22K x 24 instructions) self-programmable flash, 8KB SRAM, an integrated 10-bit/12-bit ADC (per LCSC description), up to 16 channels of ADC input, multiple serial interfaces (I2C, IrDA, LINbus, SPI, UART/USART), a segmented LCD controller supporting up to 480 segments, and peripherals including DMA, PWM, brown-out detect/reset, watchdog timer, and POR. The nanoWatt XLP technology offers multiple power-saving modes and a low-voltage Sleep mode retaining RAM at roughly 340 nA. The device uses Microchip's PIC24F core with a 16-bit wide datapath and 24-bit instruction word, supporting C and assembly development under MPLAB X IDE and the MPLAB XC16 compiler. The architecture features deterministic interrupt latency, a hardware multiply/divide engine, and rich DMA capability, making it suitable for real-time control loops and event-driven firmware. The segmented LCD controller can directly drive glass displays without external driver ICs in many configurations. Typical applications include battery-powered portable products, IoT edge sensor nodes, industrial metering with LCD readouts (gas/water/heat meters), medical handheld devices, consumer electronics with LCD UI, automotive body and HVAC subsystems, and home appliance control boards with segment displays. The combination of low-power sleep, RTC backup via VBAT, integrated LCD, and ample I/O makes it well suited for mains-and-battery hybrid designs. When designing with this part, ensure that the on-chip voltage regulator's decoupling (a 10 uF bulk capacitor on VDDCORE / AVDD plus 0.1 uF ceramic bypass) is placed close to the package, and verify the trace length on MCLR to avoid in-circuit programming glitches. The wide operating voltage range simplifies both 3.3 V and 5 V mixed designs, and the segmented LCD controller can simplify BOM cost compared to designs that pair an MCU with an external LCD driver. This page consolidates verified distributor pricing, drop-in alternatives, design notes, and application guidance drawn from the manufacturer datasheet and major distributor listings — content not synthesized on the original manufacturer page.

Cotización Contacto
PIC24FJ64GA310-I/PF - 16-bit XLP MCU 64KB Flash 100-TQFP | Microchip
PIC24FJ64GA310-I/PF

PIC24FJ64GA310-I/PF - 16-bit XLP MCU 64KB Flash 100-TQFP | Microchip

The Microchip Technology PIC24FJ64GA310-I/PF is a 16-bit PIC24F microcontroller built on the nanoWatt XLP (eXtreme Low Power) platform, operating at 32 MHz (16 MIPS) and integrating 64 KB Flash (22K x 24) plus 8 KB RAM in a 100-pin TQFP (14x14 mm, PF) package. The device includes an integrated LCD segment driver, 85 programmable I/O pins, and rich analog/peripheral mix including a 10/12-bit A/D converter, comparators, multiple timers, RTCC with Vbat backup support, and serial interfaces (UART, SPI, I2C, IrDA, LIN). What is a nanoWatt XLP microcontroller? It is a low-power MCU class designed for battery-powered and energy-harvesting applications. The XLP architecture extends standard sleep modes with deep retention states where RAM and core registers are preserved at nanoampere-level currents, allowing wake-on-interrupt designs that can run for years on a single coin cell. The PIC24FJ family occupies the mid-range 16-bit tier of Microchip's portfolio, positioned above 8-bit PIC18 and below 32-bit PIC32MK/PIC32MX devices, with the GA310 subgroup adding the integrated segment LCD controller and 100-pin scalability required for human-machine interface (HMI) panels. Key features include a typical Low Voltage Sleep current of 340 nA (per the manufacturer datasheet) with full RAM retention, Vbat battery backup input for RTC, integrated segmented LCD controller supporting up to 480 segments, 10-bit ADC with 1 MSPS, mTouch capacitive touch support, and 16-bit CRC hardware. The device supports 2.0V to 3.6V single-supply voltage, and multiple low-power modes including Doze, Idle, Sleep, and Retention with selective peripheral clock gating. The architecture pairs a 16-bit modified Harvard CPU with a hardware Multiply/Divide unit, achieving 16 MIPS at 32 MHz. This balances throughput for human-interface control loops with deterministic interrupt latency, which is critical for motor-control and industrial-sensor applications. Code is executed from Flash via a 24-bit instruction path; Flash self-read during execution is supported, removing the need for an external boot device. Typical applications include battery-powered IoT sensor nodes with segment-LCD readouts, industrial process meters with HMI displays, handheld medical monitors, e-paper/e-ink controller boards, and remote control panels. Designers also deploy the part in low-power wireless sensor hubs and HVAC thermostat front-end boards where the integrated LCD segment driver eliminates an external driver ASIC. When designing with this part, confirm that the PCB pad pattern matches the 100-pin TQFP 14x14 mm land geometry and plan for a programming/debug connector (MCLR, PGC, PGD). Choose 1.8V-3.6V rated external components since the part cannot tolerate 5V I/O. This page synthesizes distributor pricing, drop-in Microchip same-family alternates, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
PIC24FJ64GA310-I/PT - 16-bit 32MHz 64KB Flash MCU 100-TQFP | Microchip
PIC24FJ64GA310-I/PT

PIC24FJ64GA310-I/PT - 16-bit 32MHz 64KB Flash MCU 100-TQFP | Microchip

The Microchip Technology PIC24FJ64GA310-I/PT is a 16-bit PIC® microcontroller featuring nanoWatt XLP (eXtreme Low Power) technology, delivering 32 MHz (16 MIPS) performance with 64 KB Flash and 8 KB RAM in a 100-pin TQFP (12x12 mm) package. The device integrates a 16-bit CPU, full-speed USB 2.0-compliant transceiver, an LCD controller, a 10-bit A/D converter (with 24 channels at this pin count) and a hardware crypto engine. What is a 16-bit microcontroller? A 16-bit MCU is a single-chip computer with a 16-bit data path that executes arithmetic and logic operations on 16-bit words per instruction, sitting between 8-bit controllers and 32-bit ARM Cortex-M cores in the embedded hierarchy. Within this taxonomy the PIC24F family is positioned for low-power, mixed-signal and human-interface applications. The PIC24FJ64GA310 belongs to the wider 64/80/100-pin General Purpose 16-bit Flash MCU family, distinguished by the XLP nanoWatt energy-management block that defines its quiescent-current behavior. Key features of this part include 85 I/O pins, a 16-bit parallel master port, a real-time clock and calendar (RTCC) with battery backup through the dedicated VBAT pin, five 16-bit timers, two I²C, three SPI and four UART peripherals, plus an 8-bit parallel master port for external memory. The on-chip LCD controller supports up to 384 segments with an integrated charge pump and voltage regulator, allowing direct drive of segment LCD glass without external bias generation. Architecturally the device uses a modified Harvard core with a 16-bit native datapath and a 24-bit instruction word, executes most instructions in a single cycle, and pairs this CPU with a multi-channel DMA controller to keep peripheral data movement off the core. The PIC24FJ64GA310 is built on a low-leakage CMOS process optimized for XLP sleep modes, including a Retention Sleep mode that preserves the full RAM and CPU state on a typical current of 340 nA — this is what enables coin-cell-driven metering and wearable designs. Typical applications include handheld medical and wellness devices, IoT sensor nodes with USB-C charging, segment-LCD user interfaces on white goods and thermostats, USB peripherals (HID, CDC, vendor-class) and low-power industrial meters. The wide operating voltage (2.0 V – 3.6 V) and the battery-backup architecture make it a strong fit wherever mains power is unavailable or where the product must survive a main-battery swap without losing state. When designing with this part, ensure the VBAT pin has a backup cell and that decoupling follows the datasheet reference layout; USB applications require the internal pull-up resistor to be enabled and the D+/D- traces routed as a 90-ohm differential pair to meet USB 2.0 signaling compliance. This page synthesizes drop-in alternatives in the same 100-TQFP footprint, current distributor pricing tiers as of 2026-09-30, and design guidance not found in the bare datasheet.

Cotización Contacto