Microcontroladores

Productos (18722)

PIC32MK0512GPK064T-I/MR - 32-bit 120MHz MCU 512KB Flash | Microchip
PIC32MK0512GPK064T-I/MR

PIC32MK0512GPK064T-I/MR - 32-bit 120MHz MCU 512KB Flash | Microchip

The Microchip Technology PIC32MK0512GPK064T-I/MR is a 32-bit MIPS32 microAptiv PIC microcontroller IC operating at up to 120 MHz, with 512 KB of ECC-protected Flash and a hardware Floating Point Unit (FPU), housed in a 64-pin QFN 9x9 mm package. The variant decoded in the part number suffix is the General Purpose (GP) family member with USB Full-Speed and without CAN-FD. A PIC32 microcontroller is a 32-bit MCU architecture based on the MIPS32 instruction set (microAptiv core) that bridges the gap between 8/16-bit PIC microcontrollers and high-performance ARM Cortex-M parts. It belongs to the broader hierarchy: microcontroller -> embedded MCU -> 32-bit MCU -> MIPS32 MCU -> PIC32MK family. The PIC32MK family in particular targets motor control, industrial control, and Industrial IoT (IIoT) applications where DSP performance, FPU math, and rich analog peripherals matter. Key features include 120 MHz CPU clock with single-cycle MAC and four 64-bit accumulators, MicroMIPS mode for 40% smaller code size, hardware FPU for single- and double-precision IEEE-754 math, 512 KB dual-panel Flash with ECC, 128 KB SRAM with ECC, a 12-bit ADC up to several Msps with up to ~49 analog inputs available, USB Full-Speed, multiple UART/SPI/I2C, and motor-control PWMs. The 64-QFN package includes an exposed pad for thermal dissipation. Architecturally, the PIC32MK combines a deterministic MIPS32 pipeline, dedicated DSP extensions, and a rich analog front end. The dual-panel Flash allows live updates without stopping code execution, useful in industrial field upgrades. ECC on Flash and SRAM improves reliability in noisy motor and power-conversion environments. Typical applications include BLDC/PMSM motor control (field-oriented control), industrial PLCs, multi-channel data acquisition, USB-connected industrial sensor nodes, and IIoT edge gateways. The wide operating voltage (2.3V to 3.6V) and industrial temperature range (-40C to +85C) make the part suitable for harsh environments. When designing with this device, ensure the PCB includes a thermal pad soldered to a sufficiently large copper pour for heat extraction, plan for decoupling capacitors near each VDD pin pair, and reserve the USB DP/DM traces for 90-ohm differential impedance to pass USB FS compliance. This page synthesizes distributor pricing and stock for PIC32MK0512GPK064T-I/MR, identifies drop-in alternatives in the same 64-QFN footprint, and supplies design notes that complement the manufacturer datasheet.

Cotización Contacto
PIC32MK0512GPK064T-I/PT - 120MHz 32-bit MCU 512KB Flash TQFP-64 | Microchip
PIC32MK0512GPK064T-I/PT

PIC32MK0512GPK064T-I/PT - 120MHz 32-bit MCU 512KB Flash TQFP-64 | Microchip

The Microchip Technology PIC32MK0512GPK064T-I/PT is a 32-bit MIPS microAptiv PIC32MK microcontroller running up to 120 MHz, integrating 512 KB of ECC-protected Flash and 128 KB of SRAM in a 64-pin TQFP (10x10 mm) industrial-grade package. It targets high-performance motor control, industrial control, and IIoT edge nodes that require DSP/FPU math plus rich analog and connectivity peripherals. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, timers, communication peripherals, and analog/digital I/O. 32-bit microcontrollers extend 8/16-bit parts with wider registers, deterministic interrupt latency, hardware floating-point and DSP engines, and larger address spaces; PIC32MK MCUs sit in the performance tier between low-power Cortex-M0+ parts and application processors, providing deterministic real-time control with on-chip op amps, high-speed ADCs and PWM modules. Key features include 512 KB Flash with ECC, 128 KB SRAM, 4 KB EEPROM emulation, a single-precision FPU, DSP instructions, a USB 2.0 Full-Speed device/host/OTG controller, multiple UART/SPI/I2C interfaces, up to seven 16-bit timers, and a 12-bit ADC with up to 3 MSPS sampling and dedicated op amps. The 64-pin TQFP (PT) package offers 49 user I/O lines and an operating voltage of 2.3V to 3.6V, suitable for 3.3V digital systems with industrial temperature grade (-40C to +85C). Architecture-wise, the device uses the MIPS32 microAptiv core with hardware multiply/divide, a tightly-coupled 5-stage pipeline, and a dedicated DSP/FPU pipeline. Bus matrix arbitration lets the CPU, DMA controller and USB engine access SRAM concurrently, eliminating DMA stalls typical of single-master microAptiv designs; combined with ECC on Flash, the PIC32MK delivers high reliability for IEC 60730 class-B safety firmware. Typical applications include BLDC/PMSM motor control (FOC with PFC), industrial PLC modules, multi-channel data acquisition front-ends, USB HID/CDC peripherals, and IIoT sensor hubs that benefit from on-chip op amps and high-speed ADC. The industrial temperature grade and ECC memory suit unattended industrial installations and long-lifecycle equipment. When designing, allocate the dedicated 12-bit ADC analog supply and reference pins close to the MCU, route the 120 MHz crystal traces symmetrically, and observe the 2.3V minimum Vdd. For motor-control use, prefer the 64-pin variants with all seven PWM generators and pair with a gate driver such as the MCP8024 or the dsPIC33EP family for cost-optimized companion MCUs. This page synthesizes distributor pricing, drop-in alternatives within the same 64-pin TQFP footprint, and practical design notes not consolidated in the manufacturer datasheet alone.

Cotización Contacto
PIC32MK0512GPK100-E/PT - 120MHz MCU 512KB Flash TQFP-100 | Microchip
PIC32MK0512GPK100-E/PT

PIC32MK0512GPK100-E/PT - 120MHz MCU 512KB Flash TQFP-100 | Microchip

The Microchip Technology PIC32MK0512GPK100-E/PT is a 32-bit MIPS32 microAptiv microcontroller IC running at 120 MHz with 512 KB of Flash memory, packaged in a 100-pin TQFP (12x12 mm). It combines a single-precision/double-precision Floating Point Unit (FPU), MicroMIPS mode for ~40% smaller code, four 64-bit accumulators and single-cycle MAC supporting saturating and fractional math. A 32-bit microcontroller (MCU) is a microprocessor core integrated with Flash program memory, SRAM, peripherals and a multi-channel interrupt controller on a single chip. PIC32MK devices sit at the high-performance end of Microchip's PIC32 family and bridge toward DSP-class workloads, occupying a position in the hierarchy: PIC32MK -> PIC32 family -> 32-bit MCU -> microcontroller -> embedded semiconductor. Key differentiating features include 512 KB Dual-Panel Flash with ECC protection, four 64-bit accumulators for DSP workloads, seven 12-bit ADCs at up to 3.75 MSPS each, a general-purpose variant with USB but no CAN-FD, and 78 user I/O pins. The 100-pin TQFP supports a wide range of motor control, industrial and IIoT interfaces. Architecturally, the device pairs a 120 MHz MIPS32 microAptiv core with a hardware FPU, dedicated DSP accumulators and four 64-bit timers. Dual-panel Flash enables live firmware updates without device reset, while ECC-protected memory improves reliability for industrial long-life deployments. Typical applications include BLDC/PMSM motor control, industrial PLC modules, multi-channel data acquisition systems, IIoT edge nodes and USB-connected industrial sensors. The combination of seven fast ADCs and DSP extensions suits sensor-fusion and closed-loop control. When designing with this MCU, allocate decoupling capacitance per the family hardware guide and route the analog/digital grounds with a single point tie. For motor-control layouts, keep the PWM outputs symmetrical and isolate the analog reference from switching currents. This page synthesizes distributor pricing, drop-in alternatives and design notes not found in the standalone manufacturer datasheet, helping engineers select the right PIC32MK variant for motor control, IIoT and industrial designs.

Cotización Contacto
PIC32MK0512GPK100T-E/PT - 120MHz 512KB Flash MCU | Microchip
PIC32MK0512GPK100T-E/PT

PIC32MK0512GPK100T-E/PT - 120MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC32MK0512GPK100T-E/PT is a 32-bit microcontroller built on the MIPS32 microAptiv core, running at 120MHz, with 512KB of ECC-protected Flash, 128KB SRAM, 4KB EEPROM, and 78 I/O pins in a 100-pin TQFP (12x12 mm) package. It integrates a single-precision/double-precision hardware Floating Point Unit, four 64-bit accumulators, and a single-cycle MAC that supports saturating and fractional math for DSP workloads. The 120MHz core, combined with the dual-panel Flash, makes it suitable for deterministic, hard-real-time control loops in motor and industrial applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and programmable peripherals into one package. In the broader semiconductor hierarchy, MCUs sit within the embedded computing category, alongside microprocessors (MPUs) and DSPs. Within the embedded-computing taxonomy, this part belongs to the 32-bit MCU tier, which delivers higher computational throughput than 8-bit or 16-bit MCUs and adds DSP-class instructions for signal-processing tasks. Key features include a USB Full-Speed device/host/OTG controller, multiple 12-bit ADC modules with up to 3.5 Msps conversion rate, high-resolution PWM outputs targeting motor and digital-power control, and a rich communication peripheral set including CAN-FD, UART, SPI, I2C, and SQI. The 512KB ECC Flash provides bit-error correction for safety-critical firmware storage, and the dual-panel layout supports live update and simultaneous read-while-write. The part operates from 2.3V to 3.6V across an industrial -40C to +125C temperature range, qualified for the -E (extended) grade. Architecturally, the PIC32MK combines a RISC-style Harvard architecture (separate instruction and data paths) with MicroMIPS compressed instructions, reducing code size by approximately 40% versus the standard MIPS32 instruction set. This allows complex motor-control or digital-power algorithms to fit in the on-chip Flash, while the FPU accelerates transcendental math used in vector control or Kalman-filter estimation loops. Typical applications include industrial motor drives (BLDC, PMSM, ACIM), field-oriented control (FOC) and power-conversion inverters, industrial PLCs, multi-channel data acquisition with synchronized sampling, IIoT edge controllers, and USB-connected human-machine interface (HMI) panels. The combination of DSP extensions, FPU, and high-resolution PWM specifically targets digital power and motor-control firmware libraries from Microchip. When designing with this device, ensure the high-resolution PWM timing requirements are met by following Microchip AN1078 (Sensorless Field Oriented Control) or AN1292 (Power Conversion) reference designs. Decoupling the AVDD/AVSS analog supply pins with 100nF + 10uF bulk capacitors per ADC is essential to achieve the rated 12-bit ENOB performance, and unused I/O should be configured as outputs low or inputs with internal pull-up to minimize I_leakage in safety-relevant hardware. This page synthesizes distributor pricing, drop-in alternatives in the same 100-TQFP footprint, datasheet download links, and practical motor-control design notes that go beyond the manufacturer datasheet excerpt.

Cotización Contacto
PIC32MK0512GPK100T-I/PT - 32-bit 120MHz MCU 512KB Flash 100-TQFP | Microchip
PIC32MK0512GPK100T-I/PT

PIC32MK0512GPK100T-I/PT - 32-bit 120MHz MCU 512KB Flash 100-TQFP | Microchip

The Microchip Technology PIC32MK0512GPK100T-I/PT is a 32-bit MIPS32 microAptiv PIC microcontroller running at 120MHz with 512KB ECC-protected Flash memory, housed in a 100-pin TQFP (12x12 mm) package. It integrates a Floating Point Unit for single/double precision math, four 64-bit accumulators, single-cycle MAC with saturating and fractional support, and MicroMIPS mode that delivers 40% smaller code size. The device targets high-performance motor control, industrial control, and Industrial IoT applications. A 32-bit microcontroller (MCU) is a programmable processor integrating CPU core, Flash program memory, SRAM data memory, and a rich peripheral set on a single die. The PIC32MK family extends the PIC32 architecture with DSP extensions, hardware FPU, and dual-panel Flash that supports live update — a feature unique to motor-control firmware. Within the broader hierarchy, the PIC32MK belongs to the 32-bit MCU segment alongside ARM Cortex-M3/M4, sitting between 16-bit PIC24 and 64-bit MIPS/ARM application processors. Key features of the PIC32MK0512GPK100T-I/PT include 120MHz core clock, 512KB dual-panel Flash, USB Full Speed, 12-bit ADC, CAN-FD communication, multiple UART/SPI/I2C interfaces, and dedicated motor-control PWM. The dual-panel Flash architecture allows background firmware updates without halting the application — critical for industrial drives that cannot tolerate downtime. ECC protection on Flash and SRAM improves reliability in noisy motor-drive environments. The microAptiv core with integrated FPU and DSP extensions accelerates trigonometric math used in field-oriented control (FOC) algorithms, reducing CPU loading and enabling higher switching frequencies for smoother torque. The MicroMIPS mode compresses instruction stream by 40%, allowing more application code in the same Flash footprint and reducing fetch power. Typical applications include AC induction and BLDC/PMSM motor drives, industrial PLCs, IIoT edge nodes with CAN-FD connectivity, multi-channel data acquisition systems, and factory automation controllers. The device is also well-suited for power-conversion digital control loops. When designing with this MCU, use Microchip's MPLAB Harmony v3 framework for peripheral libraries and middleware. Place a 0.1uF decoupling capacitor adjacent to every VDD/VSS pin pair, and provide a 12mm copper pour under the TQFP thermal pad with at least 8 thermal vias for heat dissipation. This page consolidates Microchip datasheet specifications, distributor pricing tier snapshots, drop-in PIC32MK same-package alternatives, and engineering design notes beyond what is summarized in the datasheet alone.

Cotización Contacto
PIC32MK0512MCF064 - 120MHz 32-Bit MCU with FPU | Microchip
PIC32MK0512MCF064

PIC32MK0512MCF064 - 120MHz 32-Bit MCU with FPU | Microchip

The Microchip PIC32MK0512MCF064 is a high-performance 32-bit microcontroller based on the MIPS32 microAptiv core, operating at up to 120 MHz with 512 KB of Flash and 128 KB of SRAM, packaged in a 64-pin TQFP (10x10 mm). A 32-bit MCU combines a processor core, memory, and programmable peripherals on a single integrated circuit. With a 32-bit data path, it delivers greater performance and memory addressing than 8-bit or 16-bit MCUs. The PIC32MK family sits in the microcontroller hierarchy as a general-purpose and motor-control application MCU, positioned for industrial control and IIoT systems. Key features include seven 12-bit ADCs each running at up to 3.75 MSPS, multiple CAN 2.0B controllers, USB FS device support, four I2C and six I2S interfaces, PWM modules, and quadrature encoder interfaces (QEI). The integrated FPU accelerates single-precision floating-point math while DSP instructions speed filtering and control loops. Operating voltage spans 2.3V to 3.6V with industrial temperature grades of -40C to +85C (I suffix) or -40C to +125C (E suffix). The MIPS32 microAptiv core uses a 5-stage pipeline delivering 1.5 DMIPS/MHz, so at 120 MHz the device achieves roughly 180 DMIPS. A DMA controller offloads data movement between ADCs, communication peripherals, and SRAM, keeping the CPU free for control algorithms. In-Circuit Serial Programming (ICSP) via PGECx/PGEDx pin pairs simplifies field programming, and SEGGER debug tools are supported. Typical applications include field-oriented control (FOC) of brushless DC motors, multi-channel CAN gateways, and IIoT edge nodes requiring real-time sensing and control. The high-channel-count ADC plus PWM makes it well suited to closed-loop multi-phase motor drives. Design tip: decouple the 3.3V supply carefully at every VDD pin and pair PGECx/PGEDx pins correctly for programming. Pricing as of 2026-08-29 starts around $11.48 at LCSC.

Cotización Contacto
PIC32MK0512MCF064-E/MR - 32-bit 80MHz MCU 512KB Flash 64-QFN | Microchip
PIC32MK0512MCF064-E/MR

PIC32MK0512MCF064-E/MR - 32-bit 80MHz MCU 512KB Flash 64-QFN | Microchip

The Microchip Technology PIC32MK0512MCF064-E/MR is a 32-bit MIPS32 microAptiv PIC32MK microcontroller running up to 80 MHz, with 512 KB ECC Flash, 64 KB SRAM, and a 64-pin 9x9 mm QFN package optimized for general purpose and motor control applications. An MCU (microcontroller) is a single-chip computer integrating a CPU core, program and data memory, and programmable peripherals. The PIC32MK family sits in Microchip's 32-bit MCU portfolio above the 16-bit PIC24F and below the high-end SAME70/SAMS70 lines, and below PIC32MX/MZ family derivatives in cost-per-MIPS. As a motor-control and general-purpose part, the PIC32MK0512MCF064 serves designers building industrial drives, digital power, and Field-Oriented Control (FOC) motor loops where deterministic PWM and analog feedback are mandatory. Key features include a 120 MHz capable MIPS32 microAptiv core (this part is rated to 80 MHz), 512 KB Flash with ECC, 64 KB SRAM, four pairs of PWM outputs with up to 2 ns resolution, a 12-bit 3.75 Msps ADC with up to 42 analog channels, four op-amps and three comparators for analog signal conditioning, and CAN-FD plus USB-FS/Host connectivity. A Floating-Point Unit (FPU) accelerates real-time DSP math used in sensored and sensorless motor control. Architecture is a Harvard-style microAptiv pipeline with dedicated multipliers, an integrated FPU, and a tightly-coupled DMA engine. The motor-control PWM peripheral supports complementary outputs, fault inputs, and dead-time insertion, while the high-speed ADC can be triggered from the PWM with sub-microsecond latency. ECC on Flash protects against bit-flips in long-lifetime industrial installations. Typical applications include BLDC and PMSM motor control, industrial automation PLCs, digital switching power supplies, solar inverters, and USB-connected human-machine interfaces. Wide operating voltage (2.5 V to 3.6 V) and -40C to +125C extended temperature support harsh-environment deployment. When designing with this device, ensure the 64-QFN exposed pad is soldered to a continuous ground pour for thermal dissipation and signal integrity. Plan pin allocation early - the 9x9 mm QFN provides more I/O than the 64-pin TQFP but requires via-in-pad or thermal vias for the e-pad. This page synthesizes real distributor pricing, Microchip-recommended alternatives, drop-in same-package substitutes, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto
PIC32MK0512MCF064-E/PT - 120MHz 512KB Flash 32-Bit MCU | Microchip
PIC32MK0512MCF064-E/PT

PIC32MK0512MCF064-E/PT - 120MHz 512KB Flash 32-Bit MCU | Microchip

The Microchip PIC32MK0512MCF064-E/PT is a 32-bit general-purpose and motor-control microcontroller IC built on the MIPS32 microAptiv core, packaged in a 64-pin TQFP (10x10 mm). It integrates 512 KB of Flash, 64 KB of SRAM (with up to 128 KB depending on configuration), and a CAN-FD controller set, alongside high-resolution motor-control PWMs and a 12-bit ADC for precision analog sampling. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals. The PIC32MK family belongs to the broader hierarchy of 32-bit microcontrollers -> embedded controllers -> microprocessors -> semiconductors. The microAptiv core adds DSP and single-precision FPU extensions, making this category of MCU suitable for control loops, signal conditioning, and Industrial IoT edge nodes. Key features include up to 120 MHz CPU clock (typically derated to 80 MHz in this -E variant), four I2C ports, six I2S ports, USB 2.0 Full-Speed, CAN 2.0B, and dedicated motor-control PWM peripherals. The device operates from 3.0 V to 3.6 V, supports -40C to +125C industrial temperature range (E suffix), and is AEC-Q100 qualified for automotive environments. Architecturally, the part combines a Harvard-style bus, ECC-protected Flash, and a high-performance peripheral set including dead-band generators and fault inputs for three-phase motor drive. The on-chip FPU and DSP instructions accelerate math-heavy control algorithms like field-oriented control (FOC) without offloading to a coprocessor. Typical applications include BLDC/PMSM motor drives, industrial PLCs, multi-channel CAN-FD nodes, USB peripherals, and digital power conversion. The same silicon is also used in EV charging modules and renewable-energy inverter stages where CAN-FD and FPU performance converge. When designing with this device, provision adequate bulk and decoupling capacitance near VDD pins and route the high-speed USB differential pair with 90-ohm impedance. Reserve the trace between the debugger header and PGECx/PGEDx pins for reliable in-circuit programming. This page synthesizes distributor pricing, AEC-Q100 drop-in alternatives within the same TQFP-64 footprint, and practical design notes not collected in a single section of the manufacturer datasheet.

Cotización Contacto
PIC32MK0512MCF064-I/PT - 120MHz MCU 512KB Flash 64-TQFP | Microchip
PIC32MK0512MCF064-I/PT

PIC32MK0512MCF064-I/PT - 120MHz MCU 512KB Flash 64-TQFP | Microchip

The Microchip Technology PIC32MK0512MCF064-I/PT is a 32-bit MIPS32 microAptiv microcontroller IC running at 120 MHz with 512 KB (512K x 8) of Flash memory, packaged in a 64-pin TQFP (10x10 mm). The device combines DSP and FPU capability with a rich peripheral set targeting motor control, industrial control, and multi-channel CAN FD applications. A 32-bit microcontroller (MCU) is a microprocessor-on-a-chip that integrates a CPU core, program memory (Flash), data memory (SRAM), and configurable peripherals on a single die. The PIC32MK family sits in the hierarchy MCU -> 32-bit MCU -> MIPS32 microAptiv core -> PIC32MK GPG/MCJ sub-family. The microAptiv core implements the MIPS32r2 instruction set, includes a single-precision IEEE-754 FPU, a MAC unit for DSP, and a prefetch cache designed to sustain deterministic interrupt latency. Key features of the PIC32MK0512MCF064 include ECC-protected 512 KB Flash with pre-fetch cache, up to 64 KB SRAM, four I2C ports, six I2S ports, USB Full Speed, CAN 2.0B, 12-bit ADC modules dedicated to motor-control PWM timing, plus dedicated PWM, QEI and motor-control peripherals. The Industrial CAN FD (MCF) suffix denotes CAN FD support, distinguishing it from the MCM variant which targets CAN 2.0B. ECC Flash improves reliability in long-lifetime industrial deployments. Typical applications include sensorless and sensored BLDC/PMSM motor drives, industrial field-bridge nodes using CAN FD, Industrial IoT edge controllers, multi-channel power conversion, and USB-connected human-machine interface (HMI) panels. The wide operating temperature of -40C to +85C (industrial grade, I-suffix) suits factory-floor enclosures. When designing, reserve the dedicated motor-control PWM, ADC and QEI pins early - they are not remappable to all I/O groups. Plan boot-time and Flash endurance (typical 20k cycles on ECC Flash) for firmware-update strategy.

Cotización Contacto
PIC32MK0512MCF064T-E/MR - 80MHz 512KB Flash MCU | Microchip
PIC32MK0512MCF064T-E/MR

PIC32MK0512MCF064T-E/MR - 80MHz 512KB Flash MCU | Microchip

The Microchip PIC32MK0512MCF064T-E/MR is a 32-bit MIPS32 microAptiv PIC microcontroller IC running up to 80 MHz with 512 KB of Flash and a 64-pin QFN 9x9 mm package. It integrates a single-core MIPS32 microAptiv core with DSP extensions, a floating-point unit, and 64 KB of SRAM for motor-control and general-purpose embedded designs. The part is rated for the extended -40C to +125C industrial temperature range and ships in tape-and-reel packaging. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile Flash memory, SRAM, and a rich set of peripherals such as timers, ADC/DAC modules, communication interfaces, and PWM channels. PIC32MK devices belong to the PIC32 32-bit family (microcontroller -> 32-bit MCU -> MIPS-based MCU -> Microchip PIC32 -> PIC32MK sub-family) and combine DSP, FPU, ECC Flash, and CAN FD support, making them suitable for safety-critical and motor-control applications. Key features of the PIC32MK0512MCF064 include the MIPS32 microAptiv core with DSP/FPU, 512 KB ECC Flash, 64 KB SRAM, multiple high-speed ADC modules suited for motor-control current sensing, CAN FD peripherals, and a flexible PWM peripheral set for driving three-phase inverters. The integrated signal-chain peripherals reduce BOM cost and PCB area compared with external analog front ends. Architecturally, the device pairs the microAptiv core with a multi-channel DMA, dual 12-bit ADC modules capable of high conversion rates, and dedicated motor-control PWM peripherals. The combination of DSP, FPU, and motor-control-optimized peripherals positions the PIC32MK family for digital signal processing in field-oriented control (FOC) loops. Typical applications include three-phase BLDC/PMSM motor drives, industrial control PLCs, industrial IoT (IIoT) edge nodes, multi-channel CAN FD networks, and digital power conversion. The part combines DSP/FPU performance with deterministic motor-control peripherals, which is uncommon in this class. When designing with this MCU, ensure that the extended-temperature QFN 9x9 mm land pattern is correctly designed for the rated 80 MHz operation, that decoupling is sized per the datasheet, and that the JTAG/trace pins are routed to allow in-circuit programming and debugging. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, giving the engineer a single reference for sourcing and replacement decisions.

Cotización Contacto
PIC32MK0512MCF064T-E/PT - 32-bit 80MHz MCU 512KB Flash TQFP-64 | Microchip
PIC32MK0512MCF064T-E/PT

PIC32MK0512MCF064T-E/PT - 32-bit 80MHz MCU 512KB Flash TQFP-64 | Microchip

The Microchip Technology PIC32MK0512MCF064T-E/PT is a 32-bit microcontroller built on the MIPS32 microAptiv core, delivering up to 80 MHz CPU performance with 512 KB of Flash program memory and 64-pin TQFP surface-mount packaging. It combines a Floating Point Unit (FPU) and Digital Signal Processing (DSP) extensions with 128 KB of SRAM and 4 KB of EEPROM, providing the computational headroom required for closed-loop motor control and real-time industrial control loops. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, volatile data memory, and a rich set of on-chip peripherals. Within the broader semiconductor taxonomy, this device belongs to the 32-bit MCU category, itself a subset of microcontrollers and embedded processors. The microAptiv core sits inside the MIPS32 family and uses a load/store RISC architecture with hardware multiply-accumulate and DSP instructions, allowing engineers to execute sensor-processing algorithms without an external DSP. Key features include AEC-Q100 automotive-grade qualification, an integrated FPU/DSP, an on-chip 12-bit ADC and high-resolution PWM modules targeted at three-phase motor drive. The part operates from a 2.2 V to 3.6 V supply and is rated for the -40 C to +125 C extended industrial/automotive temperature range. The 64-pin TQFP (PT) package with 10x10 mm body provides ample ground and supply pins for noise-sensitive analog mixed-signal designs. Architecture-wise, the PIC32MK family supports up to 120 MHz on higher-speed variants and integrates dedicated CAN, USB, and motor-control peripherals. This particular suffix (T-E/PT) specifies tape-and-reel packaging, an extended temperature grade, and the 64-pin TQFP package. The F suffix in the part number designates the Flash density (512 KB), while the trailing CF indicates the motor-control peripheral configuration rather than the general-purpose (GP) variant. Typical applications include three-phase brushless DC motor drives, industrial PLCs, multi-channel CAN node controllers, robotics and CNC controllers, and renewable-energy power conversion stages. The combination of AEC-Q100 grade and a high-pin-count package also makes it suitable for body electronics modules and automotive HVAC actuators. When designing with this MCU, allocate at least one ground pin per power pin and follow Microchip's reference manual guidelines for analog/digital supply isolation. The integrated op-amps and comparators can replace external components in current-shunt sensing, but require careful PCB layout to avoid coupling switching noise into the analog front-end.

Cotización Contacto
PIC32MK0512MCF064T-I/MR - 120MHz 512KB MCU 64-QFN | Microchip
PIC32MK0512MCF064T-I/MR

PIC32MK0512MCF064T-I/MR - 120MHz 512KB MCU 64-QFN | Microchip

The Microchip Technology PIC32MK0512MCF064T-I/MR is a 32-bit MIPS32 microAptiv PIC32MK microcontroller IC delivering 120MHz CPU performance with 512KB of ECC Flash and 64KB SRAM, housed in a 64-pin 9x9 mm QFN package with industrial -40C to +85C temperature rating. The device combines a high-performance core with a rich peripheral set aimed at motor control, industrial control, Industrial IoT, and multi-channel CAN-FD applications. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash), data memory (SRAM), and a broad set of on-chip peripherals (timers, ADC, communication controllers) into a single chip, enabling compact embedded designs without external glue logic. The PIC32MK family sits at the top of Microchip's 32-bit MCU portfolio, positioned between general-purpose PIC32MX and high-performance dsPIC/PIC32MZ families, with hardware floating-point, DSP extensions, and dedicated motor-control peripherals. Key features of the PIC32MK0512MCF064T-I/MR include a 120MHz MIPS32 microAptiv core with FPU and DSP extensions, 512KB ECC Flash with pre-fetch cache, 64KB SRAM, 4KB EEPROM emulation, four dedicated op-amps for current sensing, dual 12-bit 5MSPS ADC modules with up to 32 analog inputs, and dual CAN-FD controllers. The integrated op-amps eliminate external analog signal conditioning for Field-Oriented Control (FOC) motor loops, reducing BOM cost and PCB area. The architecture separates high-speed analog from digital logic using independent ADC cores and dedicated DMA channels, enabling deterministic sampling even under heavy interrupt load. Hardware CRC, AES, and deadman timers support functional-safety and industrial-automation requirements. The 64-QFN package exposes 53 GPIO and supports JTAG/ICSP trace for debug. Typical applications include BLDC/PMSM motor drives (FOC up to 4 motors), solar inverters, industrial PLC modules, IIoT edge nodes with CAN-FD backbones, and multi-axis robotic controllers. The dual CAN-FD controllers and high ADC bandwidth also suit automotive body-electronics gateways. Design tip: when targeting this MCU for motor control, allocate the four integrated op-amps to phase-current sensing and route ADC traces as differential pairs; provide a clean 3.3V AVDD rail (LDO from system 5V) and short the AGND pin to GND at a single star point to avoid analog-to-digital crosstalk under PWM switching. This page synthesizes distributor pricing, drop-in alternative candidates, and practical design notes not found in the manufacturer datasheet, including same-package alternatives for footprint reuse across the PIC32MK family.

Cotización Contacto
PIC32MK0512MCF064T-I/PT - 32-bit 120MHz MCU 512KB Flash | Microchip
PIC32MK0512MCF064T-I/PT

PIC32MK0512MCF064T-I/PT - 32-bit 120MHz MCU 512KB Flash | Microchip

The Microchip Technology PIC32MK0512MCF064T-I/PT is a 32-bit MIPS32 microAptiv PIC microcontroller running at up to 120 MHz, integrating 512 KB of Flash and 131 KB of SRAM in a 64-pin TQFP (10x10 mm) package. It belongs to the PIC32MK family, which targets motor control, industrial control, Industrial IoT (IIoT), and multi-channel CAN applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash and RAM), and programmable peripherals into one package. The PIC32MK family sits inside the wider 32-bit MCU taxonomy: microcontroller -> 32-bit MCU -> MIPS32-based MCU -> PIC32 family -> PIC32MK sub-family. It is engineered for real-time control tasks where deterministic performance and rich analog/motor-control peripherals matter more than the largest on-chip Flash size. Key features include a 120 MHz MIPS32 microAptiv core with single-precision FPU and DSP extensions, four independent ADC pairs (12-bit, 3.75 MSPS with up to 41 analog inputs), four analog comparators, six UART/SPI/I2C peripherals plus USB 2.0 Full-Speed, two CAN-FD modules, and four SQI/QSPI interfaces. Dedicated motor-control PWM, QEI, and 16-bit PWM/IC/OC timers make it well-suited to field-oriented control (FOC) of three-phase BLDC and PMSM motors. The architecture separates application code from motor-control loops using dual Flash banks and ECC-protected memory options, allowing live firmware updates and improved reliability in safety-conscious systems. The 64-pin TQFP gives access to the full peripheral set, while a 64-pin QFN variant (PIC32MK0512MCF064T-I/MR) is available for space-constrained layouts. Typical applications include industrial BLDC/PMSM motor drives, robotic motion controllers, multi-axis CNC peripherals, solar inverters, PLC modules, and CAN-FD-enabled IIoT sensor nodes. The device operates from 2.2 V to 3.6 V with an industrial -40 C to +85 C junction range. When designing with this part, place decoupling capacitors within 2 mm of every VDDCORE/VDDIO pin pair and keep the analog AVSS/AVDD traces short and star-grounded for best ADC SNR. Always use Microchip's MPLAB Harmony configurator and a recent XC32 compiler to bring up the FPU/DSP and motor-control PWMs. This page synthesizes verified distributor pricing, drop-in pin-compatible alternatives from the same PIC32MK family, and practical design notes not collected in the manufacturer datasheet.

Cotización Contacto
PIC32MK0512MCF100-E/PT - 120MHz 512KB Motor Control MCU | Microchip
PIC32MK0512MCF100-E/PT

PIC32MK0512MCF100-E/PT - 120MHz 512KB Motor Control MCU | Microchip

The Microchip Technology PIC32MK0512MCF100-E/PT is a 32-bit general purpose and motor control application microcontroller in the PIC32MK family, built on the MIPS32 microAptiv core with a single-precision Floating Point Unit (FPU) and DSP extensions. The part integrates 512 KB of Flash, 256 KB of SRAM, and 4 KB of EEPROM, and operates at up to 120 MHz from a 2.2 V to 3.6 V supply. It is housed in a 100-pin TQFP package (12x12 mm) and is qualified to AEC-Q100 for automotive applications, with an operating temperature range of -40C to +125C. What is a motor-control MCU? A motor-control microcontroller is a class of embedded processor that combines a deterministic CPU core with high-resolution PWM timers, fast ADCs for current/voltage sensing, dedicated op-amps for signal conditioning, and communication peripherals (CAN-FD, I2C, SPI, UART) required to drive and supervise brushless DC, stepper, or permanent-magnet synchronous motors. Within the broader power management and industrial hierarchy, the PIC32MK sits alongside other 32-bit motor-control families such as the C2000 from Texas Instruments and the STM32F/G series from STMicroelectronics. Key differentiating features include seven 12-bit 3.75 MSPS ADC cores capable of supporting up to 42 analog inputs, four on-chip operational amplifiers, five analog comparators, dedicated motor-control PWM peripherals, dual CAN-FD modules, USB-FS, four I2C, six I2S, and dual-panel Flash with Live Update support. The FPU + DSP pipeline executes 154 DMIPS and supports saturating and fractional arithmetic, single-cycle MAC, and four 64-bit accumulators, enabling real-time field-oriented control (FOC) loops without offloading. The PIC32MK0512MCF100-E/PT supports field-oriented control (FOC) of PMSM/BLDC motors, multi-axis CNC machine control, digital power conversion (solar inverters, SMPS), Industrial IoT edge nodes with CAN-FD, and automotive body/battery management. The dual-panel Flash allows firmware live-update without service interruption - valuable for industrial drives where downtime is costly. Note the -E temperature grade (extended -40C to +125C) and AEC-Q100 qualification distinguish this part from the lower-grade PIC32MK0512MCF100-I/PT. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto
PIC32MK0512MCF100-I/PT - 120MHz 32-Bit MCU 512KB Flash TQFP-100 | Microchip
PIC32MK0512MCF100-I/PT

PIC32MK0512MCF100-I/PT - 120MHz 32-Bit MCU 512KB Flash TQFP-100 | Microchip

The Microchip Technology PIC32MK0512MCF100-I/PT is a 32-bit MIPS32 microAptiv MCU delivering up to 120 MHz CPU clock, 512 KB of Flash program memory and 100 KB of SRAM in a 100-pin TQFP (12x12 mm) package. It targets high-performance motor control, industrial automation, IIoT and multi-channel CAN-FD applications where DSP-like signal processing, FPU math and rich analog peripherals are required. A microcontroller (MCU) is a single-chip processor core with integrated Flash, RAM, peripherals and interrupt logic that runs embedded firmware. The PIC32MK family sits at the high end of Microchip's PIC32 portfolio, combining a MIPS32 microAptiv core with optional FPU and DSP extensions, hardware motor-control PWMs, 12-bit analog, op amps and CAN-FD controllers. The hierarchy is: MCU -> 32-bit MCU -> MIPS32 MCU -> PIC32MK family -> motor-control / IIoT subfamily. Key features of this part include 4 on-chip op amps, 12-bit 3 MSPS ADC with up to 28 analog channels, 7 independent 16-bit PWM generators with 1.6 ns resolution, two CAN-FD modules, USB full-speed, and a 12-bit DAC. Compared with earlier PIC32MX parts, the PIC32MK adds dedicated motor-control peripherals, a faster ADC and DSP ISA extensions that accelerate field-oriented control (FOC) loops. Typical applications include BLDC/PMSM motor drives, field-oriented control inverters, industrial PLCs, CAN-FD sensor hubs, and IIoT edge nodes that need deterministic real-time response. The integrated op amps and comparators close the current-sense loop without external components, reducing BOM and PCB area. When designing, allocate a 4-layer PCB with the exposed thermal pad soldered to a continuous ground pour; place the two VCAP decoupling pins within 2 mm of their respective 10 uF ceramic capacitors, and route the analog reference VREF+ to a low-noise LDO. Verify the engine analyzer by running the FOC IDL 1.0 cycles below.

Cotización Contacto
PIC32MK0512MCF100T-I/PT - 32-Bit 120MHz 512KB Flash MCU | Microchip
PIC32MK0512MCF100T-I/PT

PIC32MK0512MCF100T-I/PT - 32-Bit 120MHz 512KB Flash MCU | Microchip

The Microchip PIC32MK0512MCF100T-I/PT is a 32-bit MIPS32 microAptiv PIC32MK microcontroller operating at 120MHz with 512KB of Flash memory and 100-TQFP (12x12 mm) package. It is part of the PIC32MK family that combines high-performance 32-bit processing with a rich peripheral set targeting motor control, industrial control, and Industrial Internet of Things (IIoT) applications. The device supports 3.3V operation and integrates DSP and FPU capabilities for math-intensive tasks. A microcontroller (MCU) is a single-chip computer containing a processor core, memory, and programmable peripherals. The PIC32MK family uses the MIPS32 microAptiv core, which is a 32-bit RISC architecture (reduced instruction set computing) with DSP extensions. Within the broader taxonomy, the PIC32MK sits in the hierarchy MCU -> embedded processor -> semiconductor -> integrated circuit, and is positioned for high-performance real-time control applications requiring deterministic motor control loops and multi-channel industrial networking. Key features of the PIC32MK0512MCF100T-I/PT include 512KB of Flash program memory, 120MHz CPU clock, integrated FPU for floating-point math, hardware multiply/divide, CAN-FD interfaces for industrial networking, multiple PWM channels for motor drive, 12-bit ADC modules, and a rich analog/mixed-signal subsystem. The device targets field-oriented control (FOC) of brushless DC and permanent magnet synchronous motors, where its DSP extensions accelerate Park/Clarke transforms. Typical applications include industrial motor drives (BLDC/PMSM servo control), industrial PLC modules, multi-channel CAN-FD networked sensors, IIoT edge nodes, and multi-channel power conversion systems. The 100-pin TQFP package offers ample I/O for multi-axis motor control, with multiple PWM pairs and high-resolution analog front-ends integrated on-chip. When designing with this device, ensure the decoupling network includes 100nF ceramic capacitors placed as close as possible to each VDD/VSS pair, plus a bulk 4.7uF or 10uF capacitor on the main rail. For motor control, pay close attention to the analog and digital ground partitioning to avoid PWM switching noise coupling into ADC measurements. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
PIC32MK0512MCJ048-E/7MX - 32-bit 120MHz MCU 512KB Flash | Microchip
PIC32MK0512MCJ048-E/7MX

PIC32MK0512MCJ048-E/7MX - 32-bit 120MHz MCU 512KB Flash | Microchip

The Microchip Technology PIC32MK0512MCJ048-E/7MX is a 32-bit MIPS32 microAptiv microcontroller with a 120MHz core, 512KB ECC-protected dual-panel Flash, and 64KB SRAM, housed in a 48-pin VQFN (6x6 mm) package with an exposed thermal pad. The device is AEC-Q100 qualified for automotive applications and is part of the PIC32MK General Purpose and Motor Control (MCJ) family with integrated CAN-FD peripherals. A 32-bit microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash), data memory (RAM), and programmable peripherals on a single silicon die. Within the broader taxonomy, an MCU belongs to the microcontroller family, which sits under embedded processors and semiconductors. The PIC32MK family extends this concept into the 32-bit MIPS RISC domain, adding DSP extensions, a single-precision hardware Floating Point Unit (FPU), and microMIPS compressed instruction mode for 40% smaller code size. Key features of the PIC32MK0512MCJ048-E/7MX include four 64-bit accumulators with single-cycle MAC supporting saturating and fractional math, four 12-bit ADC modules operating up to 3.75 MSPS with up to 42 analog inputs, and dedicated motor-control PWM peripherals targeting Field-Oriented Control (FOC) of BLDC and PMSM motors. The 3.3V operating range (2.3V to 3.6V) and 37 digital I/O pins make the device suitable for mixed-signal industrial designs. The architecture pairs the microAptiv core with a Dual-Panel Flash supporting Live Update, allowing firmware to be swapped in real time without CPU stall. A separate 12-bit DAC, multiple UART/SPI/I2C, and two CAN-FD controllers position the part for IIoT gateways, automotive body controllers, and multi-axis motor drives. Typical applications include Brushless DC (BLDC) motor control for e-bikes and appliances, Industrial Internet of Things (IIoT) sensor nodes, automotive body and chassis ECUs, multi-channel CAN-FD networks, and precision industrial-control PLCs. The extended (-40C to +125C) operating range supports harsh under-hood automotive environments. When designing with this device, allocate the dual-panel Flash for fail-safe firmware updates and reserve the motor-control PWMs for timing-critical switching. The 6x6 VQFN requires thermal vias under the exposed pad to keep junction temperature within derating limits at full 120MHz operation. This page synthesizes distributor stock, AEC-Q100 qualification data, and drop-in alternatives in the same 48-pin VQFN footprint not found in a single distributor listing.

Cotización Contacto
PIC32MK0512MCJ048-E/Y8X - 32-Bit MCU 80MHz 512KB Flash | Microchip
PIC32MK0512MCJ048-E/Y8X

PIC32MK0512MCJ048-E/Y8X - 32-Bit MCU 80MHz 512KB Flash | Microchip

The Microchip Technology PIC32MK0512MCJ048-E/Y8X is a 32-bit MIPS32 microAptiv microcontroller operating up to 80 MHz with 512 KB of Flash program memory and 64 KB of SRAM, housed in a 48-pin TQFP (7x7 mm) package. It targets motor control, industrial control, and Industrial IoT applications with on-chip FPU, four 64-bit accumulators, and a 12-bit ADC and 12-bit DAC. What is a 32-bit MCU? A microcontroller (MCU) is a single-chip computer integrating a CPU core, memory, and programmable peripherals. The PIC32MK belongs to the PIC32 family of 32-bit microcontrollers and is part of the broader MIPS-based MCU hierarchy (MCU -> microcontroller -> embedded processor -> semiconductor). Its microAptiv core with FPU enables single and double-precision floating-point math, while MicroMIPS mode delivers roughly 40 percent smaller code size for memory-constrained applications. Key features of this variant include 512 KB dual-panel Flash with live update support, 64 KB SRAM, four 12-bit ADC modules totaling up to 27 channels, motor-control PWM peripherals, CAN-FD, USB, and up to 37 general-purpose I/O pins. The ECC-protected Flash and ECC SRAM improve reliability for industrial and automotive-grade designs. Architecturally, the PIC32MK0512MCJ048 uses a single-cycle MAC unit with saturating and fractional math support, ideal for DSP-style signal processing in motor-control loops. The 80 MHz operation paired with DSP extensions allows high-bandwidth control algorithms in field-oriented control (FOC) and PFC stages. Typical applications include BLDC/PMSM motor drives, industrial PLCs, IIoT sensor hubs, digital power converters, and automotive body controllers. The combination of CAN-FD, USB, and rich analog peripherals makes it a single-chip solution for connected industrial nodes. When designing with this part, note the -E temperature grade (-40C to +125C) suits industrial environments. Verify supply voltage and decoupling against the datasheet's DC characteristics section before committing to a PCB layout. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
PIC32MK0512MCJ048-I/7MX - 120MHz MCU 512KB Flash 48-VQFN | Microchip
PIC32MK0512MCJ048-I/7MX

PIC32MK0512MCJ048-I/7MX - 120MHz MCU 512KB Flash 48-VQFN | Microchip

The Microchip Technology PIC32MK0512MCJ048-I/7MX is a 32-bit MIPS32 microAptiv PIC microcontroller IC running at 120MHz with 512KB (512K x 8) of Flash and 64KB RAM, packaged in a 48-pin VQFN (6x6 mm) industrial-grade (-40C to +85C) housing. It combines a single-precision/double-precision hardware Floating Point Unit, four 64-bit accumulators, single-cycle MAC with saturating and fractional math, and MicroMIPS mode for 40% smaller code size, delivering 120MHz of DSP-class compute. The device operates from 2.3V to 3.6V and offers five 5V-tolerant I/O pins with up to 22 mA source/sink capability plus 37 total I/O. What is a 32-bit MCU? A microcontroller (MCU) is a single-chip computer containing a CPU core, memory (Flash for program storage, SRAM for data), and integrated peripherals. The PIC32MK0512MCJ048 belongs to the hierarchy: 32-bit microcontroller -> ARM/MIPS-class MCU -> PIC32 family -> PIC32MK sub-family -> motor-control + CAN-FD + FPU/DSP variant. MCUs dominate embedded control because they integrate decision-making, timing, and peripheral interfacing into one package, replacing discrete logic + microprocessor + external memory designs. Key differentiating features include: 120MHz core with hardware FPU and DSP extensions (IEEE 754 single and double precision), 512KB dual-panel Flash with live update capability, ECC-protected memory, integrated CAN-FD controller, dedicated motor-control PWM peripherals, four 64-bit accumulators for high-dynamic-range signal processing, and 12-bit ADC at up to 3.75 Msps. The 48-VQFN package with exposed thermal pad enables compact industrial and IIoT designs. Architecture depth: The microAptiv core implements the MIPS32r2 ISA with MicroMIPS compressed mode, giving a 40% code-density advantage over pure 32-bit. The FPU executes IEEE 754 single- and double-precision operations in hardware, freeing the CPU for control loops. Four 64-bit accumulators and single-cycle 32x32 MAC with saturating math enable field-oriented control (FOC) algorithms for permanent-magnet synchronous motors (PMSM) and brushless DC (BLDC) drives within a single chip. Typical applications include field-oriented motor control (PMSM/BLDC), industrial PLC and automation, CAN-FD networked sensor nodes, multi-channel data acquisition, robotics and servo drives, and Industrial IoT (IIoT) edge controllers. The combination of FPU, CAN-FD, and motor-control PWM makes it a single-chip solution for closed-loop motor control over industrial buses. Design consideration: When migrating from a PIC32MX to PIC32MK0512, note that the 48-VQFN pinout differs - verify the package land pattern against the datasheet (DS60001570D) before reusing existing PCB footprints. The device requires a 2.3V-3.6V supply; 5V-tolerant I/O simplifies interfacing to legacy 5V sensors and gate drivers but the core supply must still be regulated. This page synthesizes Microchip distributor pricing, pin-compatible drop-in alternatives from the PIC32MK family, and engineering design notes for motor-control firmware development that are not found in the standalone datasheet.

Cotización Contacto
PIC32MK0512MCJ048-I/Y8X - 32-Bit 120MHz MCU with FPU & CAN-FD | Microchip
PIC32MK0512MCJ048-I/Y8X

PIC32MK0512MCJ048-I/Y8X - 32-Bit 120MHz MCU with FPU & CAN-FD | Microchip

The Microchip Technology PIC32MK0512MCJ048-I/Y8X is a 32-bit MIPS32 microAptiv microcontroller IC running at 120 MHz, integrating 512 KB of Flash with ECC and 64 KB of SRAM in a 48-pin TQFP (7x7 mm) package. It features a single-precision/double-precision Floating Point Unit (FPU), MicroMIPS mode for 40% smaller code size, four 64-bit accumulators, and single-cycle MAC supporting saturating and fractional math. These DSP-grade features target real-time motor control, digital power conversion, and Industrial Internet of Things (IIoT) applications. A 32-bit microcontroller (MCU) is a programmable processor that integrates CPU, memory, and peripherals on a single die. Within the embedded hierarchy, microcontrollers fall under microprocessors -> processors -> semiconductors. The PIC32MK family specifically bridges high-performance digital signal processing and deterministic real-time control, sitting in the power management and motor control segment of Microchip's portfolio alongside dsPIC33 and SAM-class devices. Key features include Dual Panel Flash with Live Update for in-field firmware upgrades without downtime, ECC-protected program memory for functional safety, a 12-bit 5 MSPS ADC, multiple high-speed comparators, dedicated motor-control PWM modules, and CAN-FD connectivity for industrial networking. The device operates from 2.3V to 3.6V and supports an industrial temperature range of -40C to +85C. The 48-pin TQFP footprint provides 37 general-purpose I/O lines for sensor and actuator interfacing. Architecturally, the microAptiv core pairs a 5-stage pipeline with tightly coupled DSP extensions, enabling deterministic interrupt response critical for field-oriented control (FOC) loops. The integrated FPU accelerates Park/Clarke transforms used in three-phase motor drives, while the CAN-FD peripheral supports bit rates up to 8 Mbps for automotive and industrial chassis networks. Typical applications include brushless DC (BLDC) and permanent magnet synchronous motor (PMSM) drives, industrial servo controllers, solar inverters, smart sensor hubs, and IIoT edge nodes. The Live Update dual-panel flash architecture is particularly valuable in motor drives where firmware updates cannot interrupt the controlled process. When designing with this MCU, ensure the analog and digital supply pins (AVDD/DVDD) are properly decoupled with 100 nF ceramic capacitors placed as close to the pins as possible. The motor control PWM outputs require careful PCB layout to minimize switching noise coupling into the ADC inputs. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not consolidated in the Microchip datasheet, enabling faster BOM selection for motor control and IIoT designs.

Cotización Contacto
PIC32MK0512MCJ064-E/R4X - 32-bit MCU, 512KB Flash, 64-VQFN | Microchip
PIC32MK0512MCJ064-E/R4X

PIC32MK0512MCJ064-E/R4X - 32-bit MCU, 512KB Flash, 64-VQFN | Microchip

The Microchip Technology PIC32MK0512MCJ064-E/R4X is a 32-bit PIC32MK microcontroller built around the MIPS32 microAptiv core, integrating 512 KB of ECC-protected Flash and 64 KB of SRAM in a 64-pin VQFN (9x9 mm) package. It runs at 120 MHz at 2.3-3.6 V with the FPU and DSP extensions active, making it a strong fit for motor control and industrial signal-chain designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich peripheral set into one IC. Within the taxonomy of semiconductors, an MCU sits under microcontrollers -> integrated circuits -> semiconductors, and the PIC32MK series targets real-time deterministic control where DSP and floating-point math accelerate closed-loop algorithms. The microAptiv core plus IEEE 754 single/double-precision FPU distinguishes the PIC32MK family from simpler Cortex-M0/M3 alternatives. Key features include dedicated motor-control PWM modules, multiple CAN-FD controllers, four 64-bit accumulators with single-cycle MAC, op-amps and analog comparators on-chip, and 12-bit ADCs with up to 28 channels. The PIC32MK core supports MicroMIPS mode for ~40% smaller code size, and ECC on Flash improves reliability in safety-conscious applications. The 64-VQFN package exposes rich I/O while keeping board footprint compact at 9x9 mm. The integrated op-amps, comparators, and PWM make the device well-suited for sensorless FOC motor drives, reducing external analog stages. CAN-FD connectivity supports modern automotive and industrial fieldbus protocols. Together, these features let designers replace multiple analog components and external communication ICs with one MCU. Typical applications include BLDC/PMSM motor control, industrial automation, IIoT edge nodes, digital power conversion, and multi-channel sensor hubs. The wide operating voltage and -40C to +125C range also suit harsh industrial environments. When designing with this device, allocate the FPU for field-oriented control math to cut loop time, and use ECC-aware linker files to take advantage of the Flash ECC. Be mindful that the E/R4X variant is rated 80 MHz at the extended 125C temperature grade, while the I-grade runs full 120 MHz at 85C. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
PIC32MK0512MCJ064-I/PT - 120MHz 512KB Flash MCU | Microchip
PIC32MK0512MCJ064-I/PT

PIC32MK0512MCJ064-I/PT - 120MHz 512KB Flash MCU | Microchip

The Microchip PIC32MK0512MCJ064-I/PT is a 32-bit MIPS microAptiv microcontroller operating up to 120 MHz with 512 KB Flash and 64 KB SRAM, packaged in a 64-pin TQFP (10x10 mm). It targets motor control, industrial automation, and Industrial Internet of Things (IIoT) designs that demand high-performance computation combined with rich analog and communication peripherals. According to the Microchip PIC32MK General Purpose and Motor Control Family datasheet, the device integrates dedicated motor-control PWM, quadrature encoder interfaces, and CAN-FD connectivity. A 32-bit microcontroller (MCU) is an embedded processor that executes instructions from on-chip Flash memory while interfacing with analog and digital peripherals. Microcontrollers sit within the broader taxonomy of microprocessors -> CPUs -> computing ICs -> semiconductors. The PIC32MK family is engineered for real-time control loops, combining deterministic interrupt latency with hardware PWM generation. It belongs to the MIPS architecture lineage and is supported by Microchip's MPLAB X IDE and Harmony framework. The 64-pin TQFP package maps onto the surface-mount QFP family with industry-standard JEDEC footprints. Key features include 512 KB ECC-protected Flash, 64 KB SRAM, four operational amplifiers, five comparators, twelve 16-bit timers, nine PWM channels, three QEI modules, three I2S audio interfaces, two CAN-FD ports, USB-FS, and 5V-tolerant I/O with up to 22 mA source/sink. The on-chip 12-bit ADC reaches 3.75 MSPS with up to 28 analog inputs. The integrated op-amps and comparators eliminate external analog signal conditioning in FOC motor-drive stages, reducing BOM and PCB area while preserving signal integrity. The device implements the microAptiv MCU core with a 5-stage pipeline, hardware multiply-divide, and DSP extensions. ECC on Flash and RAM improves reliability in long-lifetime industrial deployments. The motor-control PWM block supports center-aligned, edge-aligned, and multi-phase modes with sub-microsecond edge resolution, while the QEI module accepts A/B/index signals from incremental encoders for field-oriented control. Multiple DMA channels offload data movement for high-speed ADC sampling, freeing the CPU for control algorithms. Typical applications include brushless DC motor drives, industrial PLCs, IIoT edge nodes, servo amplifiers, and multi-channel data-acquisition systems. Designers also deploy this MCU in solar inverters, factory automation controllers, and CAN-FD-connected sensor hubs. The combination of motor-control peripherals and CAN-FD makes it a strong fit for Industry 4.0 distributed control nodes. When designing with this MCU, plan for a 3.0V-3.6V supply, route the analog and digital grounds with separate pours that join at a single point, and place bypass capacitors within 5 mm of every VDD/VSS pin. Decoupling for the ADC reference pin requires a low-ESR ceramic capacitor; noisy switching regulators near the analog section will degrade ADC SNR. The 120 MHz operation also benefits from a 4-layer PCB stack-up to control impedance on USB and CAN-FD lines. This page synthesizes distributor pricing, drop-in alternatives, application guidance, and design notes that are not consolidated in the manufacturer datasheet.

Cotización Contacto
PIC32MK0512MCJ064-I/R4X - 120MHz MCU 512KB Flash 64-VQFN | Microchip
PIC32MK0512MCJ064-I/R4X

PIC32MK0512MCJ064-I/R4X - 120MHz MCU 512KB Flash 64-VQFN | Microchip

The Microchip Technology PIC32MK0512MCJ064-I/R4X is a 32-bit MIPS32 microAptiv RISC microcontroller running at up to 120 MHz, integrating 512 KB of ECC-protected Flash and 64 KB of SRAM in a 64-pin VQFN (9x9 mm) package. The I/R4X suffix denotes the industrial temperature range (-40C to +85C) and a tape-and-reel packaging variant with the same die as other PIC32MK0512MCJ064 variants. A rich motor-control and connectivity peripheral set makes this MCU a strong fit for high-performance embedded designs. What is a PIC32MK microcontroller? The PIC32MK family from Microchip is a 32-bit microcontroller line based on the MIPS32 microAptiv core. The family sits within the broader taxonomy of microcontroller -> embedded controller -> MCU -> 32-bit MCU -> MIPS-based MCU -> Microchip PIC32. The microAptiv core supports MicroMIPS compressed instruction mode for up to 40% smaller code size, includes a single-precision hardware Floating Point Unit (FPU), four 64-bit accumulators, and a single-cycle MAC that supports saturating and fractional math - features that position PIC32MK at the high end of the PIC32 portfolio alongside dsPIC signal controllers. Key features of the PIC32MK0512MCJ064 include 512 KB of Flash with Error Correction Code (ECC), 64 KB of SRAM, four general-purpose 16-bit timers, and a 12-bit ADC module with up to 30 analog input channels suited for multi-phase motor current sampling. The device integrates CAN-FD controllers, multiple SPI/I2S/I2C interfaces (using updated Host/Client terminology in the latest datasheet revision), five UART modules, and a motor-control PWM peripheral set. The 64-pin VQFN package with exposed pad provides good thermal dissipation for the 120 MHz operation. Technically, the PIC32MK architecture leverages a Harvard memory topology with separate buses for instruction and data fetch, allowing simultaneous access and improved throughput versus Von Neumann designs. The hardware FPU accelerates IEEE-754 single- and double-precision math, which simplifies control-loop code for vector control of three-phase motors and supports sensorless field-oriented control (FOC) algorithms without software emulation overhead. ECC on the Flash reduces soft-error risk in industrial environments, while the four 64-bit accumators and DSP extensions accelerate FIR/IIR filters and PID calculations. Typical applications include BLDC and PMSM motor drives, industrial automation PLCs, multi-channel data acquisition systems, building automation controllers, and Industrial Internet of Things (IIoT) edge nodes. The combination of CAN-FD, motor-control PWMs, and 30 ADC channels is specifically engineered for triple-axis or multi-axis motor control where sensor feedback, commutation timing, and inter-node communication must converge on a single device. When designing with this MCU, confirm that the 9x9 mm VQFN PCB footprint and the I-grade temperature range match your application's environment. For debug, the PIC32MK is supported by Microchip's MPLAB X IDE and programmers such as ICD4, PK4, and the older ICD3 - power the target externally during debug sessions to avoid brown-out glitches. This page synthesizes distributor pricing, drop-in alternative variants within the same PIC32MK family, and practical design notes not found in the standalone manufacturer datasheet.

Cotización Contacto
PIC32MK0512MCJ064T-E/PT - 120MHz MCU 512K Flash Motor Control | Microchip
PIC32MK0512MCJ064T-E/PT

PIC32MK0512MCJ064T-E/PT - 120MHz MCU 512K Flash Motor Control | Microchip

The Microchip Technology PIC32MK0512MCJ064T-E/PT is a 32-bit MIPS32 microAptiv microcontroller operating at up to 120 MHz, integrating 512 KB of ECC-protected Flash and 64 KB of SRAM in a 64-pin TQFP (PT) package rated -40C to +125C. The 'E' suffix indicates the extended industrial temperature grade while 'T' denotes tape-and-reel packaging, and the part is built around a 120 MHz core combined with a motor-control-optimized peripheral set including 9 PWM channels, 3 QEI modules, 5 analog comparators, and 3 I2S/SSI interfaces for digital audio or converter loops. A 32-bit microcontroller (MCU) is a single-chip processor that integrates a CPU core, program Flash, data RAM, and a heterogeneous mix of peripherals (timers, ADC, communication controllers, PWM) on one die. PIC32MK devices target deterministic real-time control loops that benefit from a RISC core, deterministic interrupt latency, hardware motor-control peripherals, and CAN-FD networking for industrial and automotive-grade embedded systems. Key features include 8 DMA channels for offloading CPU data movement, 12 general-purpose timers, dual 12-bit ADC subsystems, multiple UART/SPI/I2C interfaces, dedicated CAN-FD controllers, and a 5V-tolerant I/O structure that simplifies interfacing to industrial sensors and gate drivers. ECC on Flash and parity on RAM increase functional safety for long-lifetime industrial deployments. The PIC32MK MCJ variant emphasizes motor control: three independent QEI modules allow simultaneous dual/three-shunt FOC of two brushless motors, while the 9 PWM outputs (with complementary mode and dead-time insertion) drive half-bridges directly. Combined with the 5V I/O and 120 MHz CPU, the architecture removes the need for an external DSP or FPGA in mid-complexity drives. Typical applications include sensorless and sensored BLDC/PMSM motor drives, industrial PLCs, building-automation fans and pumps, robotics joint controllers, and IIoT edge nodes with CAN-FD backbones. The wide temperature range and ECC Flash also make it a fit for outdoor or ruggedized equipment. When designing with this part, validate the power-budget for the two ADC rails (use separate AVdd/AVss pins and a ferrite bead) and place a 0.1 uF + 10 uF decoupling pair within 5 mm of every Vdd/Vss pair. Reserve the ICSP pins on production boards for in-field firmware updates if your service model requires them. This page synthesizes distributor pricing, drop-in same-package alternatives, and application-level design notes that complement (but do not replace) the manufacturer datasheet DS60001570.

Cotización Contacto