Microcontroladores

Productos (18699)

PIC32MX210F016DT-V/ML - 40MHz 32-bit MCU 16KB Flash 44-QFN | Microchip
PIC32MX210F016DT-V/ML

PIC32MX210F016DT-V/ML - 40MHz 32-bit MCU 16KB Flash 44-QFN | Microchip

The Microchip PIC32MX210F016DT-V/ML is a 32-bit RISC microcontroller built on the MIPS32 M4K core, delivering 40 MHz / 66 DMIPS performance with 16 KB of on-chip Flash and 4 KB of SRAM, housed in a 44-pin QFN (ML) 8x8 mm package with an exposed thermal pad. The device operates from 2.3 V to 3.6 V, supports 34 I/O pins, and integrates USB 2.0 full-speed device, two I2S/SPI modules, two UART/I2C modules, a Parallel Master Port (PMP), a 10-bit ADC, and a Charge Time Measurement Unit (CTMU) for mTouch capacitive sensing. The "DT" suffix indicates tape-and-reel packaging and the "V" temperature grade spans -40°C to +105°C for harsh industrial environments. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and programmable peripherals into one package. The PIC32MX family sits in the hierarchy microcontroller -> 32-bit MCU -> MIPS-based MCU -> embedded controller, and is purpose-designed for low-power, mixed-signal embedded applications such as USB peripherals, capacitive touch interfaces, and cost-sensitive consumer or industrial control. PIC32MX devices serve as representative variants in Microchip's 32-bit MCU portfolio, balancing performance, peripheral integration, and low BOM footprint. The PIC32MX210F016DT-V/ML achieves less than 0.5 mA/MHz active current consumption with multiple low-power modes (Sleep, Idle, Doze) enabled via Peripheral Pin Select (PPS) mapping. Hardware DMA to feature external memory interfacing and 5-mips fan-out cycles. Two UART and I2C modules serve asynchronous IO. Pin-select enables two I2S modules for Codec and serial communications. With 16 KB Flash and 4 KB SRAM, the platform is well-suited for cost-sensitive USB peripherals, capacitive-touch embedded applications. Typical applications include USB audio peripherals, mTouch capacitive touch buttons and sliders, low-cost graphics terminals via PMP, and industrial control interfaces. The wide 2.3 V to 3.6 V supply range simplifies designs powered directly from a USB rail or 3.3 V LDO. Designers should ensure the exposed thermal pad is soldered to a sufficient ground plane for thermal dissipation, and follow Microchip's PIC32MX USB flash requirements (e.g., 12 MHz crystal with appropriate load capacitors) when enabling the USB peripheral. The wide voltage tolerance enables direct USB power-supply usage. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
PIC32MX220F032B-50I/SS - 32KB Flash 50MHz MCU | Microchip
PIC32MX220F032B-50I/SS

PIC32MX220F032B-50I/SS - 32KB Flash 50MHz MCU | Microchip

The Microchip Technology PIC32MX220F032B-50I/SS is a 32-bit MIPS32 M4K microcontroller running at 50 MHz with 32 KB of Flash program memory, 8 KB of SRAM, and a 28-pin SSOP package. It operates from 2.3 V to 3.6 V and delivers up to 83 DMIPS, making it a compact yet capable embedded controller for audio, graphics, and USB applications. A microcontroller unit (MCU) is a self-contained computer on a single chip that integrates a CPU core, program memory (Flash), data memory (SRAM), and a set of peripherals such as timers, serial interfaces, and analog-to-digital converters. MCUs sit within the broader hierarchy of embedded processors, below application processors and above simple 8-bit controllers, and they are the workhorse of modern electronic products because they combine deterministic real-time control with low power consumption and low system cost. The PIC32MX220F032B-50I/SS distinguishes itself through its MIPS32 M4K core, which executes most instructions in a single cycle and consumes less than 0.5 mA/MHz. It includes two I2S/SPI modules for codec and serial communication, Peripheral Pin Select (PPS) for flexible pin remapping, a Parallel Master Port (PMP) for graphics interfaces, and a Charge Time Measurement Unit (CTMU) for capacitive touch sensing. The device also integrates USB 2.0 full-speed support and advanced analog peripherals, allowing designers to eliminate external components. Architecturally, the PIC32MX1XX/2XX family uses a 5-stage pipeline with a prefetch cache to sustain near single-cycle execution from Flash. The 32 KB Flash array is organized as 32K x 8, and the 8 KB SRAM supports DMA transfers for audio and graphics data streams. The CTMU provides sub-microsecond time measurement for mTouch capacitive buttons and sliders, while the PMP enables direct connection to parallel LCD controllers without glue logic. Typical applications include portable audio players and codec interfaces, small graphics displays, USB peripheral devices, capacitive touch control panels, and industrial sensor nodes. The 50 MHz core and 83 DMIPS throughput are sufficient for real-time signal processing and user-interface tasks, while the 2.3 V to 3.6 V supply range supports both 3.3 V and battery-powered designs. When designing with this device, pay close attention to the ICSP programming pins and the analog supply filtering. The PIC32MX220F032B has more than one pair of PGECx/PGEDx pins; any pair may be used for in-circuit programming, but the clock and data pins must be used as a matched pair. All VSS and VDD pins must be connected and decoupled with 0.1 uF ceramic capacitors placed close to the package. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that are not consolidated in the manufacturer datasheet, giving engineers a single reference for selection, sourcing, and layout decisions.

Cotización Contacto
PIC32MX220F032B-I/ML - 32-bit MCU 40MHz 32KB Flash USB QFN-28 | Microchip
PIC32MX220F032B-I/ML

PIC32MX220F032B-I/ML - 32-bit MCU 40MHz 32KB Flash USB QFN-28 | Microchip

The Microchip Technology PIC32MX220F032B-I/ML is a 32-bit MIPS32 M4K RISC microcontroller running at 40 MHz with 32 KB Flash and 8 KB SRAM in a 28-pin QFN (6x6) package. The device integrates USB 2.0 full-speed device/host/On-The-Go, two I2S/SPI modules for codec interfacing, two UART modules, two I2C modules, a Parallel Master Port (PMP) for graphics, a 10-bit 1 Msps ADC with up to 13 channels, and a Charge Time Measurement Unit (CTMU) for capacitive touch. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and programmable peripherals into one package. The PIC32MX family sits in the hierarchy: microcontroller -> embedded processor -> semiconductor IC. It targets cost-sensitive 32-bit embedded designs where ARM-class performance is desired but the ecosystem, tools (MPLAB X IDE, XC32 compiler, Harmony framework), and Peripheral Pin Select (PPS) flexibility are preferred. Key features include Peripheral Pin Select (PPS) for flexible pin assignment, 4 channels of hardware DMA with automatic data size detection, separate PLLs for CPU and USB clocks, and configurable WDT with low-power RC oscillator. Multiple power management modes (Sleep, Idle, Doze) keep active current under 0.5 mA/MHz typical, enabling USB battery-powered designs. The M4K core executes most instructions in one cycle and is supported by a complete toolchain including MPLAB X, Harmony, and a rich set of application libraries. Integrated USB 2.0 FS eliminates the need for an external PHY for many designs. The 28-QFN package with thermal pad provides a compact footprint suited to space-constrained USB peripherals and consumer products. Typical applications include USB HID peripherals, audio playback with I2S codec, capacitive-touch human-machine interfaces, low-cost graphics using PMP, sensor aggregation with CTMU, and industrial control nodes. The wide peripheral set allows a single MCU to replace a discrete MCU + external USB bridge + external touch IC in many products. When designing with this device, ensure the VBUS pin is properly decoupled and the 48 MHz USB PLL is configured per the datasheet. The PPS feature requires careful pin lock configuration - applications should set PPS once at startup and avoid runtime re-mapping to prevent glitches. This page synthesizes distributor pricing, parametric comparison against same-family drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet.

Cotización Contacto
PIC32MX220F032B-I/SO - 32-bit 40MHz MCU 32KB Flash 28-SOIC | Microchip
PIC32MX220F032B-I/SO

PIC32MX220F032B-I/SO - 32-bit 40MHz MCU 32KB Flash 28-SOIC | Microchip

The Microchip Technology PIC32MX220F032B-I/SO is a 32-bit MIPS M4K PIC microcontroller operating up to 40MHz with 32KB Flash and 8KB SRAM in a 28-pin SOIC package. It integrates USB 2.0 full-speed, two I2S/SPI modules for codec interfacing, Peripheral Pin Select (PPS), a Parallel Master Port (PMP), a 10-bit ADC and the Charge Time Measurement Unit (CTMU) for mTouch capacitive touch sensing. A PIC32MX 32-bit microcontroller belongs to the MIPS-based PIC32 family, which sits architecturally above the 8-bit PIC16/PIC18 and 16-bit dsPIC33 families and is positioned for higher-performance embedded applications. PIC32MX devices integrate a RISC CPU core, Flash program memory, SRAM, and rich I/O in a single CMOS chip, and the PIC32MX1XX/2XX sub-family (28/36/44-pin) is the smallest-flash-density PIC32 variant targeting USB-enabled consumer and industrial designs. Key features of the PIC32MX220F032B include 83 DMIPS performance, sub-0.5 mA/MHz active current consumption, 2.3V to 3.6V single-supply operation, four DMA channels, five 16-bit general-purpose timers, an industrial -40C to +85C temperature grade, and up to 34 user I/O. The CTMU peripheral enables cost-effective capacitive touch button and slider implementation without external ICs, while the PMP and I2S peripherals support small graphics displays and audio codec interfacing. This device is designed for cost-sensitive 32-bit USB embedded designs where PCB space is constrained. The 28-SOIC package is an industry-standard wide-body SOIC with 1.27 mm pitch, simplifying prototyping and rework. Combined with the MPLAB X IDE and Harmony framework, the PIC32MX220F032B-I/SO provides a low-risk migration path from 8/16-bit PIC designs to a true 32-bit MIPS core. Typical applications include USB human-interface devices (HID), capacitive touch control panels, small graphics LCD interfaces, audio accessories, and low-cost 32-bit industrial sensor hubs. Designers appreciate its balance of USB, touch, and graphics peripherals in a small SOIC footprint. When designing with the PIC32MX220F032B-I/SO, note the 2.3V to 3.6V supply range is shared by both core and I/O - there is no separate analog rail. Decouple VDD/VSS pairs adjacent to the ICSP PGECx/PGEDx programming/debug pins to ensure stable in-circuit programming. This page synthesizes distributor stock, parametric drop-in alternatives, and practical design considerations not found in the manufacturer datasheet alone.

Cotización Contacto
PIC32MX220F032B-I/SS - 32-bit MCU, 32KB Flash, USB | Microchip
PIC32MX220F032B-I/SS

PIC32MX220F032B-I/SS - 32-bit MCU, 32KB Flash, USB | Microchip

The Microchip Technology PIC32MX220F032B-I/SS is a 32-bit MIPS32 M4K RISC microcontroller running at up to 40 MHz (50 MHz/83 DMIPS capable) with 32 KB of Flash program memory and 8 KB of SRAM, housed in a 28-pin SSOP package. It is part of the PIC32MX1XX/2XX 28/36/44-pin family, integrating USB 2.0 full-speed OTG, two I2S/SPI modules, Peripheral Pin Select (PPS), a Parallel Master Port (PMP) for graphics interfaces, and a Charge Time Measurement Unit (CTMU) for mTouch capacitive-touch sensing. According to the manufacturer datasheet, the device operates from 2.3 V to 3.6 V across an industrial temperature range of -40 C to +105 C. A PIC32MX microcontroller is a 32-bit RISC MCU built on the MIPS32 M4K core architecture, intended for embedded designs that require more performance and memory than 8-bit/16-bit PIC MCUs while retaining the PIC ecosystem (MPLAB X IDE, Harmony, XC32 compiler). Within the broader taxonomy, the PIC32MX family sits between Microchip's 16-bit dsPIC/PIC24 devices and the higher-end PIC32MZ family, targeting USB-connected, audio/graphics-capable, and mixed-signal applications. The part number suffix encodes its position: 220 indicates Flash density (32 KB) and pin count, F032B identifies the Flash size code, I denotes the industrial temperature grade, and /SS marks the 28-pin SSOP package. Key features of this part include up to 21 available I/O pins, five 16-bit timers (one can be paired into a 32-bit timer), a 10-bit ADC with up to 13 channels and 1 MSPS conversion rate, two comparators, two UART/I2C/SPI interfaces plus a dedicated USB peripheral, and CTMU for capacitive touch. The peripheral pin select (PPS) feature allows flexible remapping of digital peripherals to any compatible I/O pin, simplifying PCB layout. Typical applications include USB HID devices (keyboards, mice, custom peripherals), consumer audio with I2S codecs, low-cost graphical LCDs driven by PMP, mTouch capacitive buttons/sliders on appliances, and industrial sensor hubs requiring 32-bit performance at PIC ecosystem cost. The PIC32MX230/250/270/274 variants in the same family offer up to 256 KB Flash, providing headroom when more code space is needed on the same footprint.

Cotización Contacto
PIC32MX220F032B-V/SP - 32-bit MCU 32KB Flash 40MHz 28-SPDIP | Microchip
PIC32MX220F032B-V/SP

PIC32MX220F032B-V/SP - 32-bit MCU 32KB Flash 40MHz 28-SPDIP | Microchip

The Microchip Technology PIC32MX220F032B-V/SP is a 32-bit RISC microcontroller based on the MIPS32 M4K core, delivering 50 MHz/83 DMIPS performance with 32 KB Flash and 8 KB SRAM in a 28-pin SPDIP (Skinny Plastic DIP) through-hole form factor. The part runs from a 2.3V to 3.6V supply, features two I2S/SPI modules for codec and serial communications, and integrates Peripheral Pin Select (PPS), a Parallel Master Port (PMP) for graphics interfaces, and a Charge Time Measurement Unit (CTMU) for mTouch capacitive touch sensing. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (SRAM), and a rich set of I/O peripherals. Within the broader taxonomy, this part belongs to: microcontroller -> 32-bit MCU -> MIPS-based MCU -> PIC32 family -> PIC32MX1XX/2XX sub-family. MCUs are the highest-volume class of integrated circuit (semiconductor) and form the embedded compute layer beneath SoCs, microprocessors, and application processors. Key differentiating specifications: 50 MHz/83 DMIPS core, 32 KB Flash, 8 KB SRAM, 21 available I/O pins, 10-bit 1.1 Msps ADC with up to 13 channels, and AEC-Q100 Grade 2 (-40C to +105C) qualification. The PIC32MX220F032B is supported by MPLAB X IDE, MPLAB Harmony, and XC32 compiler for firmware development and debugging. Architecturally, the M4K core implements a 32-bit MIPS instruction set with single-cycle multiply, hardware divide, and a 5-stage pipeline. The 32 KB Flash and 8 KB SRAM support moderate-size embedded firmware with room for protocols like Bluetooth LE, USB device, or graphics stacks. The integrated 10-bit ADC enables sensor reading without an external converter. Typical applications include consumer and industrial control panels, low-cost audio/graphics peripherals (I2S codec interface + PMP for TFT displays), USB/HID (devices) input controllers, IoT sensor hubs using CTMU capacitive sensing, and the simplified through-hole SPDIP (SP) footprint of this suffix version suited to hobbyist prototype/production. The datasheet's family key features also reference mTouch Capacitive touch buttons and sliders, parallel master ports for graphics interfaces, and Codec interface use cases. When designing with this part, evaluate Flash headroom: 32 KB is tight for stacks like USB + TCP/IP, and the 21 I/O pins constrain parallel-master graphics. The -V suffix designates the -40C to +105C industrial operating range; the bare/SO/SS package variants are industrial -40C to +85C only. The 28-pin SPDIP (SP) form factor is the only surface-mount/out-of-socket variant in the family; through-hole designs must use the SP/SP footprint. This page synthesizes current distributor pricing, drop-in alternatives within the same SPDIP-28 footprint, and practical design notes not collected in a single datasheet reference. Compared to the manufacturer datasheet alone, the engineer gains pricing context, alternative parametric comparison, and CTMU/USB design guidance.

Cotización Contacto
PIC32MX220F032B-V/SS - 32-bit MCU, 32KB Flash, 28-SSOP | Microchip
PIC32MX220F032B-V/SS

PIC32MX220F032B-V/SS - 32-bit MCU, 32KB Flash, 28-SSOP | Microchip

The Microchip Technology PIC32MX220F032B-V/SS is a 32-bit RISC microcontroller built on the MIPS32 M4K core, delivering 40 MHz / 50 DMIPS performance with sub-0.5 mA/MHz active current consumption. It integrates 32 KB Flash and 8 KB SRAM in a 28-pin SSOP package and is qualified to the automotive AEC-Q100 standard (the "-V" temperature grade, -40C to +105C). This automotive-grade part suits industrial, medical, and consumer embedded designs that need reliable 32-bit performance in a small outline package. A 32-bit microcontroller (MCU) is a single-chip computer that combines a 32-bit processor core, program memory, data memory, and a rich set of on-chip peripherals such as timers, communication interfaces, and analog blocks. The PIC32MX2xx family specifically uses the MIPS M4K architecture and is positioned at the lower end of Microchip's 32-bit portfolio, below the PIC32MX5/6/7 series but above the 16-bit PIC24/PIC28 families. PIC32MX2xx parts typically expose USB, I2S, PMP (parallel master port), CTMU (charge time measurement unit), and Peripheral Pin Select (PPS), giving designers flexibility in pin assignment. Key features of the PIC32MX220F032B-V/SS include 32 KB (32K x 8) Flash, 8 KB SRAM, 21 general-purpose I/O pins (some package variants expose up to 34 I/O), a 16-channel 10-bit ADC with 1 Msps conversion rate, two I2C, two UART, two SPI, and one USB 2.0 full-speed OTG interface. A 5-channel 16-bit timer/counter block and five 16-bit general-purpose timers provide flexible PWM and capture/compare functions. The 2.3V to 3.6V supply range supports single-cell Li-ion or regulated 3.3V systems, while on-chip CTMU enables mTouch capacitive touch sensing without an external touch controller IC. The part's technical core is the MIPS32 M4K RISC pipeline with hardware multiply/divide, single-cycle 32-bit ALU, and prefetch cache that hides Flash latency. With 32 KB Flash and 8 KB SRAM, this variant targets mid-sized embedded applications such as USB peripherals, small graphic interfaces via PMP, sensor fusion, and motor control. Code density is excellent thanks to the MIPS instruction set plus Microchip's compact 16-bit instruction mode, allowing many applications to fit easily within the 32 KB Flash budget. Typical applications for the PIC32MX220F032B-V/SS include USB HID/CDC peripherals (mice, keyboards, custom HID devices), low-cost graphics with PMP, capacitive touch user interfaces via mTouch, sensor hubs, industrial control nodes, and small audio playback interfaces through I2S. Automotive AEC-Q100 qualification opens in-cabin HMI, body controllers, and accessory modules. The 28-SSOP package keeps the part compatible with hand-soldering and breadboarding, which is helpful in prototype and small-volume runs. When designing with this MCU, allocate 4 Kbytes for bootloader + 28 Kbytes for application when using the USB bootloader, and ensure the 3.3V rail is clean (LDO, not switcher) because the 10-bit ADC is sensitive to ripple near the MCU supply pins. Use Microchip's MPLAB X IDE and Harmony v3 framework for pin configuration and peripheral drivers; the device is also supported by the open-source pic32prog and xc32 toolchain.

Cotización Contacto
PIC32MX220F032BT-50I/SO - 32-bit MCU 32KB Flash 50MHz USB | Microchip
PIC32MX220F032BT-50I/SO

PIC32MX220F032BT-50I/SO - 32-bit MCU 32KB Flash 50MHz USB | Microchip

The Microchip Technology PIC32MX220F032BT-50I/SO is a 32-bit MIPS32 M4K PIC microcontroller running at 50 MHz, with 32 KB of Flash program memory and 8 KB of SRAM, integrated USB 2.0 full-speed, CTMU, RTCC and a 28-pin SOIC wide package. The 'T' suffix denotes industrial tape-and-reel packaging while 'I' denotes the industrial temperature grade of -40C to +85C. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals such as timers, communication interfaces and ADCs. PIC32MX220 MCUs are positioned in Microchip's product taxonomy as MCU -> 32-bit microcontroller -> MIPS M4K core -> PIC32MX family -> entry-level connectivity (USB). They target embedded designs that need more code space and arithmetic headroom than 8-bit/16-bit PIC MCUs, while remaining easy to migrate to from existing PIC24/PIC32 code bases. Key features of the PIC32MX220F032BT-50I/SO include a MIPS32 M4K core with single-cycle multiply and hardware divide, 32 KB Flash / 8 KB SRAM, integrated USB 2.0 full-speed Device/Host/OTG controller, 10-bit ADC with up to 13 channels, three analog comparators, RTCC with calendar mode, CTMU for capacitive touch or time measurement, Peripheral Pin Select (PPS) for flexible pin mapping, and 4-channel hardware DMA. The 28-SOIC package offers generous I/O access in a wide-body footprint suitable for hand-soldered prototypes and industrial modules. The architecture uses a 5-stage pipeline with separate buses for Flash and RAM, allowing concurrent instruction fetch and data access. The USB module has its own PLL (96 MHz / 48 MHz) decoupled from the system PLL, ensuring jitter-tolerant USB signaling even when the system clock is reconfigured. PPS lets the user remap most digital peripherals to any available I/O pin, simplifying PCB routing for densely populated boards. Typical applications include USB HID peripherals (keyboards, mice, custom joysticks), USB-to-UART bridges, low-cost data loggers with RTCC timestamping, capacitive touch key panels using CTMU, and industrial sensor interfaces where 32-bit arithmetic is needed for linearization. The wide 28-SOIC package also makes this part well-suited for educational development boards and breadboard-friendly designs. When designing with this device, ensure that VBUS sensing is wired correctly if USB Device mode is used, and add the recommended 0.1 uF + bulk capacitor network close to the VDD/VSS pins. The PPS feature means firmware must configure pin mapping before peripheral use; the IOL1WAY fuse prevents write-after-write glitches when changing remappable pins at runtime. This page synthesizes distributor pricing, same-package drop-in alternatives and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
PIC32MX220F032BT-50I/SS - 50MHz 32-bit MCU 32KB Flash SSOP-28 | Microchip
PIC32MX220F032BT-50I/SS

PIC32MX220F032BT-50I/SS - 50MHz 32-bit MCU 32KB Flash SSOP-28 | Microchip

The Microchip Technology PIC32MX220F032BT-50I/SS is a 32-bit MIPS32 M4K RISC microcontroller running at 50 MHz with 32 KB of Flash program memory and 8 KB of SRAM, housed in a 28-pin SSOP (Shrink Small Outline Package). It belongs to the PIC32MX1XX/2XX 28/36/44-pin family and integrates USB 2.0 full-speed, three analog comparators, a 10-bit ADC with up to 13 input channels, two I2S/SPI modules, a Charge Time Measurement Unit (CTMU), and a Parallel Master Port (PMP) for graphics interfaces. A 32-bit microcontroller is an integrated circuit containing a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals such as timers, communication controllers, and analog blocks on a single silicon die. In the embedded hierarchy, MCUs sit above 8/16-bit microcontrollers but below application processors, and they dominate real-time control, sensor interfacing, and USB-connected device applications where deterministic interrupt response and low BOM cost matter most. Key features of the PIC32MX220F032BT-50I/SS include Peripheral Pin Select (PPS) which remaps digital peripherals to any I/O pin, hardware RTCC with calendar mode, five 16-bit timers/counters, two UART modules, and an operating voltage range of 2.3V to 3.6V. Typical active current is below 0.5 mA/MHz at 50 MHz and the industrial temperature grade supports -40C to +85C operation. Architecturally the device pairs a 5-stage pipelined MIPS32 M4K core capable of 83 DMIPS with a multi-vector interrupt controller and a flexible DMA engine, delivering strong throughput for USB stacks and graphics rendering through PMP. The CTMU enables mTouch capacitive touch sensing without an external timer IC. Typical applications include USB audio/Class-D device controllers, capacitive touch user interfaces, low-cost graphics HMI panels, sensor data loggers, and industrial control front-ends. Design tip: ensure the 28-pin SSOP land pattern uses 0.65 mm pitch with proper thermal relief on VDD/VSS pins and add a 1 uF + 0.1 uF decoupling pair within 3 mm of the supply pins. This page combines current distributor pricing, drop-in same-package alternatives, and design considerations drawn from the Microchip datasheet.

Cotización Contacto
PIC32MX220F032BT-I/SO - 32-bit MCU 32KB 40MHz | Microchip
PIC32MX220F032BT-I/SO

PIC32MX220F032BT-I/SO - 32-bit MCU 32KB 40MHz | Microchip

The Microchip Technology PIC32MX220F032BT-I/SO is a 32-bit MIPS32 M4K PIC microcontroller running at 40 MHz, with 32 KB of Flash program memory and 8 KB of SRAM, housed in a 28-pin SOIC package (7.50 mm body width). It operates from a 2.3 V to 3.6 V supply and exposes up to 34 I/O ports for peripheral expansion. What is a PIC32MX microcontroller? The PIC32MX family is Microchip's MIPS-based 32-bit MCU line that targets low-cost, low-power embedded applications where the simplicity of the PIC ecosystem (MPLAB X IDE, Harmony framework, X32C supports) meets 32-bit performance. Within the taxonomy it sits as: PIC32MX220 -> PIC32MX1xx/2xx family -> PIC32MX series -> 32-bit MCU -> microcontroller -> semiconductor. The 'MX' class emphasizes peripheral integration (USB, I2S, ADC) at MHz-class CPU throughput suitable for consumer electronics and industrial control. Key features of the PIC32MX220F032BT-I/SO include 32 KB Flash (32 K x 8), 8 KB SRAM, a 10-bit ADC with up to 13 channels, two UART modules, two I2C modules, two SPI modules, USB 2.0 full-speed OTG, five 16-bit timers/counters, and four DMA channels. Industrial-grade temperature range of -40C to +85C suits harsh environments, while peripheral pin select (PPSS) functionality provides flexible pin-function remapping. The architecture combines a 32-bit MIPS M4K core with separate bus structure for program and data, enabling deterministic interrupt response and single-cycle multiplication. Hardware DMA offloads memory transfers for peripherals such as ADC and UART, freeing CPU cycles for application logic. Independent PLLs for CPU and USB clocks allow the USB module to maintain 48-bit USB operation while the CPU runs at its maximum 40 MHz. Typical applications include USB peripherals (HID devices, CDC virtual COM ports), audio interfaces (I2S codec control), industrial control nodes, low-cost HMI panels, sensor hubs, and small home appliances where 32-bit headroom matters but DSP-grade filters and software libraries exceed the budget. Design consideration: The 'B' suffix denotes the 28-pin SOIC package; the 'T' indicates tape-and-reel packaging. When migrating between PIC32MX variants, verify pin compatibility across the SOIC, QFN, and SSOP footprints using the 28/36/44-pin family datasheet. This page synthesizes distributor pricing, drop-in alternatives from Microchip's same-family portfolio, and practical design notes not collected in the manufacturer datasheet, giving a more complete procurement and engineering view than distributor catalogs alone.

Cotización Contacto
PIC32MX220F032BT-V/ML - 32-bit 40MHz MCU, 32KB Flash, 28-QFN | Microchip
PIC32MX220F032BT-V/ML

PIC32MX220F032BT-V/ML - 32-bit 40MHz MCU, 32KB Flash, 28-QFN | Microchip

The Microchip PIC32MX220F032BT-V/ML is a 32-bit MIPS32 M4K PIC microcontroller running at 40 MHz, integrating 32 KB of Flash program memory and 8 KB of SRAM in a compact 28-pin QFN (ML, 6x6 mm) package. The 'BT-V' suffix indicates the tape-and-reel packaging variant qualified for the -40C to +105C automotive/V-grade temperature range, while the 'ML' suffix denotes the QFN package. What is a PIC32MX microcontroller? The PIC32MX family is Microchip's 32-bit MIPS-based microcontroller line, sitting hierarchically within the broader PIC microcontroller family (8-bit PIC10/12/16/18 -> 16-bit PIC24/dsPIC -> 32-bit PIC32) and the wider category of embedded microcontrollers -> semiconductors. PIC32MX devices combine 32-bit RISC performance (up to 83 DMIPS) with rich peripheral integration, targeting applications from general-purpose embedded control to audio, connectivity, and graphical user interfaces. Key features of the PIC32MX220F032BT-V/ML include peripheral pin select (PPS) functionality for flexible signal routing, a parallel master port (PMP) for graphics interfaces, two I2S/SPI modules for codec and serial communication, two UART and I2C modules, an integrated charge time measurement unit (CTMU) for mTouch capacitive touch sensing, and up to four DMA channels. The 32 KB Flash and 8 KB SRAM are adequate for small- to medium-sized embedded applications. Architecturally, the PIC32MX220F032B employs a MIPS32 M4K core with a five-stage pipeline and hardware multiply/divide, achieving 1.56 DMIPS/MHz. Separate PLLs are provided for CPU and USB clocks (USB 2.0 full-speed OTG is supported on the PIC32MX220 family but not exposed on all 28-QFN pins). Multiple low-power modes (Sleep, Idle, Deep Sleep) reduce current consumption to sub-mA levels for battery-powered designs. Typical applications include consumer audio devices, low-cost graphics interfaces, USB peripherals, capacitive touch user interfaces, industrial control nodes, sensor hubs, and automotive body electronics. The combination of PPS, PMP, and 32 KB Flash makes the PIC32MX220F032BT-V/ML a versatile choice for cost-sensitive 32-bit designs. When designing with this MCU, careful attention must be paid to the 28-QFN PCB land pattern - the exposed thermal pad must be soldered to a sufficiently large copper pour for thermal dissipation and electrical ground. The CTMU peripheral requires calibration for accurate touch measurements, and PPS registers must be unlocked and configured before use. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
PIC32MX220F032C-50I/TL - 32-bit MCU 50MHz 32KB Flash | Microchip
PIC32MX220F032C-50I/TL

PIC32MX220F032C-50I/TL - 32-bit MCU 50MHz 32KB Flash | Microchip

The Microchip Technology PIC32MX220F032C-50I/TL is a 32-bit RISC microcontroller built around the MIPS32 M4K core, operating at up to 50 MHz with 83 DMIPS performance, and housed in a 36-pin VTLA (5x5 mm) surface-mount package with an exposed thermal pad. The device integrates 32 KB of Flash program memory and 8 KB of SRAM, and it draws less than 0.5 mA/MHz active current. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and a rich set of peripherals including timers, communication controllers, and analog blocks. In the embedded system taxonomy, the PIC32MX220F032C belongs to the 32-bit MCU class (hypernyms: microcontroller -> embedded processor -> semiconductor), bridging the gap between 8/16-bit legacy MCUs and high-performance application SoCs. Within Microchip's PIC32 family, it sits in the cost-optimized PIC32MX1XX/2XX 28/36/44-pin subfamily aimed at USB, audio, and graphics peripherals. Key features of this device include a 10-bit 1 Msps Analog-to-Digital Converter with up to 12 input channels, two I2S/SPI modules for codec and serial communications, a Peripheral Pin Select (PPS) function that lets users remap peripheral I/O to most digital pins, a Parallel Master Port (PMP) for graphics interfaces, and USB 2.0 full-speed OTG/device support. A charge time measurement unit (CTMU) supports capacitive touch and general-purpose current source/sink applications. Hardware DMA, two UART/I2C modules, and separate PLLs for CPU and USB clocks round out the integration. Architecturally, the MIPS32 M4K core fetches instructions from internal Flash through a prefetch cache, while the tightly-coupled SRAM feeds data to the load/store unit. The two PLLs independently optimize CPU and USB clocks, and the PPS engine gives designers PCB layout flexibility. Compared to PIC16/PIC24 parts, the M4K core delivers ~10x performance at similar MHz, allowing C-based firmware (MPLAB XC32) to be used instead of assembly. Typical applications include USB peripherals, audio playback and processing, low-cost graphics user interfaces, capacitive touch user input, industrial control, and consumer electronics. The exposed thermal pad aids heat dissipation in continuous-active workloads. Designers should use decoupling capacitors close to each VDD/VSS pair and follow Microchip's VTLA PCB layout guidelines for best USB signal integrity. This page combines distributor data, drop-in alternatives, and design notes that are not collated on the manufacturer datasheet alone.

Cotización Contacto
PIC32MX220F032C-V/TL - 32-bit MCU 40MHz 32KB Flash | Microchip
PIC32MX220F032C-V/TL

PIC32MX220F032C-V/TL - 32-bit MCU 40MHz 32KB Flash | Microchip

The Microchip Technology PIC32MX220F032C-V/TL is a 32-bit MIPS32 M4K microcontroller operating at 40MHz with 32KB of Flash program memory and 8KB of SRAM, housed in a 36-pin VTLA (5x5 mm) surface-mount package with USB OTG, I2C, SPI, UART, and PMP peripherals. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and programmable I/O peripherals on one die. The PIC32MX220 sits in the hierarchy: MCU -> 32-bit MCU -> MIPS-based MCU -> PIC32 family -> PIC32MX1XX/2XX sub-family -> industrial/consumer USB-capable segment. It is designed for cost-sensitive embedded designs that need USB connectivity, moderate compute, and a familiar toolchain (MPLAB X, Harmony, XC32). Key features include a 32-bit MIPS32 M4K core with hardware multiply/divide, 32KB single-voltage Flash with self-programming support, 8KB SRAM, Peripheral Pin Select (PPS) for flexible signal routing, two I2S/SPIs for codec and serial communication, a Parallel Master Port (PMP) for graphics interfaces, a 5-channel 10-bit ADC, four 16-bit timers plus two 32-bit timers, and an integrated USB 2.0 full-speed OTG controller. The 36-VTLA package provides a small 5x5 mm footprint while still exposing 34 user I/O lines. The architecture uses a 5-stage pipeline and dual-bus Flash/RAM arrangement that delivers up to 1.5 DMIPS/MHz (the family headline is 50 MHz / 83 DMIPS, but this -V variant is rated at 40 MHz). The USB OTG controller, charge-time-measurement unit (CTMU) for capacitive touch, and PMP for parallel displays make the PIC32MX220 a versatile choice when USB host/device, simple graphics, or touch sensing are required in a compact BOM. Typical applications include USB HID peripherals, consumer audio accessories, low-cost graphics HMI panels, capacitive-touch user interfaces, sensor hubs, and industrial control nodes. Designers also pair it with external EEPROMs for parameter storage and low-power sub-GHz radios for IoT bridges. When designing with this device, place the 8 MHz primary oscillator and load capacitors within 0.5 inch of the OSCI/OSCO pins, and ensure VUSB and VDD both reach 3.3 V within 10 ms for reliable USB enumeration. Use the PPS registers instead of remapping pins manually - this avoids signal-integrity issues caused by long PCB traces. This page synthesizes distributor pricing, drop-in PIC32MX family alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
PIC32MX220F032CT-50I/TL - 32-bit MCU 32KB Flash 50MHz | Microchip
PIC32MX220F032CT-50I/TL

PIC32MX220F032CT-50I/TL - 32-bit MCU 32KB Flash 50MHz | Microchip

The Microchip Technology PIC32MX220F032CT-50I/TL is a 32-bit MIPS32 M4K RISC microcontroller with 32KB of Flash program memory and 8KB of SRAM, operating at up to 50 MHz in a 36-pin VTLA (5x5 mm) exposed-pad package. It integrates full-speed USB 2.0, three analog comparators, a Charge Time Measurement Unit (CTMU), and a Real-Time Clock Calendar (RTCC) peripheral, making it a compact MCU for connected and mixed-signal embedded designs. A PIC32MX-series 32-bit microcontroller is a MIPS-based MCU that combines the throughput of a 32-bit core with the peripheral density of a microcontroller, sitting in the taxonomy: 32-bit microcontroller -> embedded microcontroller -> RISC MCU -> Microchip PIC32 family -> semiconductor IC. The M4K core executes most instructions in one cycle and supports up to 50 MHz, while the dedicated USB peripheral, CTMU touch sensing, and RTCC provide on-chip analog timing and calendar functions without external components. Key features of the PIC32MX220F032CT-50I/TL include a 32KB Flash / 8KB SRAM memory configuration, USB 2.0 full-speed device/host/OTG, three analog comparators, 16-channel 10-bit ADC with 1 Msps conversion rate, and a CTMU that enables capacitance measurement for capacitive touch sensing. The device supports up to 25 I/O pins, multiple serial interfaces including I2C, SPI, and UART, and 5 timer/counters. It also offers DMA for efficient data movement and a JTAG/ICSP programming/debug interface. Architecturally, the PIC32MX220 uses the MIPS32 M4K core with 5-stage pipeline, a prefetch cache for Flash, and a peripheral bus running at half the system clock. The integrated USB 2.0 full-speed transceiver eliminates the need for external PHY components in many designs, while the CTMU provides a constant current source for time-based capacitive touch or temperature measurement applications. The RTCC maintains timekeeping with an external 32.768 kHz crystal. Typical applications for the PIC32MX220F032CT-50I/TL include USB peripherals such as HID input devices and CDC serial bridges, capacitive touch user interfaces, low-cost graphics displays, sensor data acquisition nodes, and battery-powered consumer products with RTCC-based timekeeping. The 5x5 mm VTLA package is also well suited to space-constrained IoT endpoint designs where USB connectivity is required. When designing with this MCU, ensure adequate decoupling on VDD/AVDD pins and follow the layout guidance for the exposed thermal pad. USB applications should follow Microchip's USB design checklist for impedance-controlled traces and proper grounding. For capacitive touch applications, the CTMU requires calibration routines described in the family datasheet. This page synthesizes distributor pricing, drop-in same-family alternatives from the PIC32MX2xx series, and practical design notes not found on DigiKey/Mouser/Octopart product listings, helping engineers evaluate the PIC32MX220F032CT-50I/TL for embedded USB, touch, and RTCC applications.

Cotización Contacto
PIC32MX220F032CT-V/TL - 32-bit 40MHz MCU, 32KB Flash | Microchip
PIC32MX220F032CT-V/TL

PIC32MX220F032CT-V/TL - 32-bit 40MHz MCU, 32KB Flash | Microchip

The Microchip Technology PIC32MX220F032CT-V/TL is a 32-bit RISC microcontroller built on the MIPS32 M4K core, delivering 40 MHz of processing performance with 32 KB of Flash program memory and 8 KB of SRAM in a 36-pin VTLA (5x5 mm) package. It operates over 2.3 V to 3.6 V, provides 34 general-purpose I/Os, and is qualified to the automotive AEC-Q100 Grade 1 (-40C to +125C) temperature range as denoted by the -V suffix in the part number. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, programmable peripherals, and I/O into one package. The PIC32 family sits in Microchip's 32-bit portfolio above the 16-bit PIC24/dsPIC families and bridges the gap toward the ARM Cortex-M-based SAM products. Within the PIC32MX1xx/2xx series, the MX220 represents the entry-level tier focused on low pin count, USB-capable, and graphics/audio-friendly applications where MIPS-class performance is sufficient. Key features include a five-channel 16-bit timer/counter block, two UART and two I2C modules, separate PLLs for CPU and USB clocks, up to four DMA channels with automatic data size detection, Peripheral Pin Select (PPS) for flexible signal routing, and a configurable Watchdog Timer with on-chip Low-Power RC oscillator. The device integrates multiple power management modes (Idle, Sleep) and supports 3.3V system designs typical of consumer, industrial, and automotive subsystems. The M4K core implements the MIPS32r2 instruction set with hardware multiply/divide and a five-stage pipeline, achieving 1.56 DMIPS/MHz (approximately 60 DMIPS at 40 MHz). On-chip USB 2.0 full-speed OTG, comparators, and 10-bit ADC channels (up to 1 Msps) make this part well suited to sensor hubs, HMI panels, and USB peripherals. The 36-pin VTLA (Very Thin Leadless Array) package reduces PCB area while still exposing sufficient GPIO for mixed-signal designs. Typical applications include USB HID peripherals, low-cost HMI keypads, sensor data acquisition, and automotive body electronics such as HVAC controls or lighting modules where AEC-Q100 and small package size are advantageous. Designers migrating from PIC16/PIC24 can scale up to MIPS-class code density without learning a new toolchain, thanks to MPLAB X IDE and Harmony compatibility. When designing with this device, observe the 2.3 V minimum supply and provide bulk decoupling at VDD/AVDD plus 0.1 uF ceramics near each pin pair. The -V temperature grade supports automotive -40C to +125C operation, while PPS mapping must be locked before peripheral enable to prevent spurious interrupts on shared pins. This page synthesizes verified distributor pricing, drop-in package-compatible alternatives within the PIC32 family, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
PIC32MX220F032D-50I/ML - 32-bit MCU, 50MHz/83DMIPS, 32KB Flash | Microchip
PIC32MX220F032D-50I/ML

PIC32MX220F032D-50I/ML - 32-bit MCU, 50MHz/83DMIPS, 32KB Flash | Microchip

The Microchip Technology PIC32MX220F032D-50I/ML is a 32-bit RISC microcontroller based on the MIPS32 M4K core, delivering 50 MHz / 83 DMIPS performance with less than 0.5 mA/MHz active current consumption, housed in a 44-pin VQFN package. The device integrates 32 KB Flash and 8 KB SRAM, two I2S/SPI modules for codec and serial communications, Peripheral Pin Select (PPS) functionality, a Parallel Master Port (PMP) for graphics interfaces, and a Charge Time Measurement Unit (CTMU) for mTouch capacitive touch buttons and sliders. A 32-bit microcontroller (MCU) is an integrated circuit containing a high-performance processor core, program and data memory, and a rich set of on-chip peripherals designed for low-latency embedded control. PIC32MX MCUs occupy the upper end of Microchip's 32-bit portfolio (PIC32 -> MIPS32/M4K family -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor), delivering deterministic interrupt response and DSP-class arithmetic performance in a single chip. Compared to 8-bit or 16-bit predecessors, 32-bit cores enable richer HMI stacks, audio codecs, and connectivity stacks on bare-metal or RTOS environments. Key features of this device include: 50 MHz / 83 DMIPS MIPS32 M4K core with single-cycle multiply and hardware multiply-accumulate (MAC); 32 KB Flash program memory with 8 KB SRAM; Peripheral Pin Select (PPS) for flexible pin function remapping; two I2S/SPI modules targeting audio codecs; Parallel Master Port (PMP) for graphics and external memory interfaces; and 10-bit ADC with up to 1 Msps sampling. The -50I/ML suffix designates a 50 MHz industrial-temperature range (-40C to +85C) and the 44-pin VQFN ML package. From an architectural perspective, the PIC32MX220 series uses a Harvard-style memory architecture with separate instruction and data paths, and is supported by Microchip's MPLAB X IDE, Harmony MCC code generator, and MPLAB XC32 compiler toolchain. The CTMU peripheral enables software-driven touch sensing with no external hardware beyond a PCB trace and ground plane, while PPS allows peripheral-to-pin remapping on the fly to simplify PCB layout. Typical applications include low-cost graphical HMI panels, audio playback appliances, USB device-class peripherals (with external transceiver), industrial control user interfaces, and capacitive touch human-machine interfaces such as appliance control panels and HVAC thermostats. Designers value the combination of mTouch touch support, PMP graphics, and dual I2S for cost-effective single-chip solutions. When designing with the PIC32MX220F032D-50I/ML, ensure the operating voltage is held within the 2.3V to 3.6V range (3.3V typical) and that decoupling is placed as close as possible to the VDD/VSS pin pairs. For USB applications, an external 3.3V LDO is recommended to meet USB suspend current requirements. This page synthesizes distributor pricing, pin-to-pin drop-in alternatives, application notes, and practical design notes not found on the manufacturer product page alone.

Cotización Contacto
PIC32MX220F032D-50I/PT - 50MHz 32-bit MCU 32KB Flash | Microchip
PIC32MX220F032D-50I/PT

PIC32MX220F032D-50I/PT - 50MHz 32-bit MCU 32KB Flash | Microchip

The Microchip Technology PIC32MX220F032D-50I/PT is a 32-bit RISC microcontroller featuring a MIPS32 M4K core operating at 50 MHz (83 DMIPS) with 32 KB of Flash program memory and 8 KB of on-chip SRAM, housed in a 44-pin TQFP (10x10 mm) package. It integrates two I2S/SPI modules for codec and serial communications, dual I2C, two UART interfaces, single IrDA and LIN modules, plus a Parallel Master Port (PMP) for graphics and a Charge Time Measurement Unit (CTMU) for mTouch capacitive touch sensing. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a high-performance processor core, Flash program memory, SRAM, and configurable peripherals into one package. In the product hierarchy, this PIC32MX1XX/2XX device sits below Cortex-M class parts in raw clock rate but offers superior MIPS-per-MHz efficiency and rich audio/graphics peripherals, making it a strong fit for cost-sensitive HMI and consumer audio designs. It belongs to the broader class of embedded microcontrollers, which are the foundational building blocks of nearly every modern electronic system. Key differentiating specifications include Peripheral Pin Select (PPS) remapping for flexible PCB routing, a 10-bit ADC with multiple conversion channels, hardware DMA (4 channels) for offloading the core, and an operating voltage range of 2.3 V to 3.6 V. The 50 MHz CPU delivers 83 DMIPS while drawing less than 0.5 mA/MHz, giving strong performance-per-watt for battery-powered designs. The industrial-grade temperature range of -40C to +85C covers most commercial and industrial environments. The PIC32MX220F032D uses the proven MIPS32 M4K Harvard architecture with separate instruction and data buses, allowing simultaneous fetch and memory access for higher throughput at lower clock speeds. Its single-cycle hardware multiply and divide unit accelerates DSP tasks such as audio filtering and FFT processing. The PMP module and I2S interfaces provide direct connectivity to graphical LCDs and audio codecs without external glue logic. Typical applications include low-cost audio playback devices, mTouch capacitive touch button panels, USB-equipped embedded products, small HMI panels with PMP-driven LCDs, and consumer white goods requiring USB Host/Device connectivity. The wide peripheral mix also fits generic 32-bit upgrade paths from PIC16/PIC24 platforms. When designing with this part, note that the 50I/PT suffix indicates industrial temperature range and TQFP packaging. JTAG debugging via the standard 2-wire programming interface is supported. Plan PCB layout for the exposed thermal pad to ensure thermal performance. This page synthesizes distributor pricing, validated drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet, helping engineers make informed decisions in sourcing and selection.

Cotización Contacto
PIC32MX220F032D-50I/TL - 32-bit MCU 32KB Flash 50MHz 44-VTLA | Microchip
PIC32MX220F032D-50I/TL

PIC32MX220F032D-50I/TL - 32-bit MCU 32KB Flash 50MHz 44-VTLA | Microchip

The Microchip Technology PIC32MX220F032D-50I/TL is a 32-bit RISC microcontroller based on the MIPS32 M4K core, delivering 50 MHz / 83 DMIPS performance with sub-0.5 mA/MHz active current consumption, packaged in a 44-pin VTLA (6x6 mm) surface-mount module. It integrates 32 KB of Flash program memory and 8 KB of SRAM, providing a compact compute platform for cost-sensitive embedded designs. A 32-bit microcontroller (MCU) is an integrated circuit that combines a 32-bit CPU core, program memory (typically Flash), data memory (SRAM), and a rich set of on-chip peripherals such as timers, communication controllers, and analog-to-digital converters on a single die. Microcontrollers sit within the broader hierarchy of microprocessors -> microcontrollers -> 32-bit MCUs -> PIC32 family -> PIC32MX2xx sub-family, and serve as the central processing element in embedded systems ranging from consumer appliances to industrial sensor nodes. Key features of the PIC32MX220F032D-50I/TL include a 13-channel 10-bit ADC, two I2S/SPI modules for codec and serial communications, Peripheral Pin Select (PPS) for flexible signal routing, a Parallel Master Port (PMP) for graphics interfaces, and a Charge Time Measurement Unit (CTMU) for mTouch capacitive touch buttons and sliders. The device supports three USB comparators, two UART modules, two I2C modules, and four channels of hardware DMA with automatic data size detection. Operating voltage spans 2.3V to 3.6V, and the industrial temperature range covers -40C to +105C. The architecture uses separate PLLs for the CPU and USB clocks, enabling precise peripheral timing independent of the core frequency. The MIPS M4K pipeline achieves 1.66 DMIPS/MHz, and the multi-vector interrupt controller with five priority levels supports deterministic real-time response. Configurable Watchdog Timer with on-chip Low-Power RC oscillator provides robust fail-safe operation without external components. Typical applications include USB device peripherals, capacitive touch user interfaces with sliders and buttons, low-cost graphics display controllers, sensor processing nodes, and consumer appliance controllers. The combination of native USB, CTMU touch, and PMP graphics makes it well suited to human-machine interface (HMI) designs. Industrial sensor hubs benefit from the 13 ADC channels and DMA offload. When designing with this part, note the VTLA package's exposed thermal pad requires careful PCB layout to maintain junction temperature, and the 2.3V minimum supply rules out direct 1.8V-only systems. PPS configuration must be performed at startup to map peripherals to physical pins, and the NRST line requires proper decoupling per the datasheet. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
PIC32MX220F032D-I/ML - 32-bit MCU 32KB Flash 40MHz USB | Microchip
PIC32MX220F032D-I/ML

PIC32MX220F032D-I/ML - 32-bit MCU 32KB Flash 40MHz USB | Microchip

The Microchip Technology PIC32MX220F032D-I/ML is a 32-bit MIPS32 M4K RISC microcontroller integrating 32 KB of Flash and 8 KB of SRAM in a 44-pin QFN (8x8 mm) package with an exposed thermal pad. Operating from a 2.3 V to 3.6 V supply at up to 40 MHz (50 MHz/83 DMIPS on the -50I speed grade), it delivers less than 0.5 mA/MHz active current consumption while integrating USB 2.0 full-speed, two I2S/SPI modules, Peripheral Pin Select (PPS), a Parallel Master Port (PMP) for graphics, and a Charge Time Measurement Unit (CTMU) for mTouch capacitive touch sensing. The device offers up to 34 general-purpose I/O pins, five 16-bit timers, a 10-bit ADC with up to 13 channels, and a 5-bit DAC, with the industrial -I/ML variant rated from -40 C to +85 C ambient operation (family rating -40 C to +105 C). A 32-bit microcontroller (MCU) is a single-chip processor whose internal datapath, registers, and ALU are 32 bits wide, enabling higher code density, larger linear address space, and substantially better MIPS per MHz than 8- or 16-bit cores. The PIC32MX2xx family belongs to the broader taxonomy: microcontroller -> 32-bit MCU -> MIPS M4K core -> PIC32MX1XX/2XX family -> USB-capable sub-family -> PIC32MX220 specific part. Within a system, a 32-bit MCU sits at the device tree between the power management IC and application peripherals, providing deterministic embedded control, USB connectivity, and on-chip analog for sensor and HMI subsystems. The PIC32MX220F032D differentiates itself by combining USB FS device, PMP graphics, and CTMU touch in a single 44-pin QFN at sub-USD 3 pricing, eliminating the need for an external touch controller. Peripheral Pin Select remaps most digital functions to user-chosen pins, simplifying PCB layout in dense designs. The MIPS M4K core executes most instructions in a single cycle and supports 5-stage pipeline operation. Typical applications include USB HID peripherals (keyboards, mice, custom HIDs), low-cost graphic LCD/segmented displays driven via PMP, capacitive touch sliders and buttons using the CTMU, industrial sensor front-ends with on-chip 10-bit ADC, and embedded control nodes that previously required an 8-bit MCU plus external USB bridge. The 32 KB Flash / 8 KB SRAM footprint is well matched to USB stacks such as Microchip's MLA USB device framework. When designing with this MCU, allocate the 8 KB SRAM carefully: USB device stacks typically consume 1.5-3 KB, leaving limited headroom for application buffers. The QFN exposed pad must be soldered to a continuous ground copper pour for thermal dissipation and signal return. Decouple each VDD/VUSB pair with a 0.1 uF ceramic plus 10 uF bulk capacitor placed within 3 mm of the pin. This page synthesizes XAIPART distributor pricing, drop-in same-package alternatives, and practical design notes for USB and touch applications that are not consolidated in the manufacturer datasheet.

Cotización Contacto
PIC32MX220F032D-I/TL - 32-bit MCU 40MHz 32KB Flash 44-VTLA | Microchip
PIC32MX220F032D-I/TL

PIC32MX220F032D-I/TL - 32-bit MCU 40MHz 32KB Flash 44-VTLA | Microchip

The Microchip Technology PIC32MX220F032D-I/TL is a 32-bit RISC microcontroller built on the MIPS32 M4K core, delivering 50 MHz / 83 DMIPS of processing performance while consuming less than 0.5 mA/MHz. The device integrates 32 KB of Flash program memory and 8 KB of SRAM in a 44-pin VTLA (6x6 mm) surface-mount package with an exposed thermal pad for improved dissipation. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals. Within the broader semiconductor taxonomy, an MCU belongs to the logic IC family and is a sub-category of integrated circuits. The 32-bit class is preferred when applications require DSP-class arithmetic, USB connectivity, or graphic user interfaces - all of which the PIC32MX220 series targets at low BOM cost. Key features include a 5-stage pipeline M4K core, hardware Multiply/Divide unit, Peripheral Pin Select (PPS) for flexible signal routing, two I2S/SPI modules for codec and serial communication, a Parallel Master Port (PMP) for graphics interfaces, a Charge Time Measurement Unit (CTMU) for mTouch capacitive touch sensing, and USB 2.0 full-speed On-The-Go. Five 16-bit general-purpose timers, five input-capture and five output-compare channels, and a 10-bit 1 Msps Analog-to-Digital Converter (ADC) round out the analog and timing peripherals. The PIC32MX220F032D-I/TL operates from a 2.3 V to 3.6 V supply over the industrial temperature range of -40 °C to +105 °C. Its low active current and multiple power-saving modes (Idle, Sleep) suit battery-powered designs, while the USB OTG and PMP peripherals enable USB peripherals and graphic LCDs without external ASICs. Typical applications include consumer USB peripherals (HID, CDC, audio), low-cost graphic user interfaces with PMP-connected LCD panels, capacitive touch panels with sliders and buttons using the CTMU, industrial control boards, and low-power IoT edge nodes. The wide peripheral set also makes this part a strong choice for educational platforms and rapid prototyping with the PICkit 3 / MPLAB ICD toolchain. When designing with this part, allocate one decoupling capacitor (100 nF ceramic) per VDD pin and a bulk 10 uF near the package exposed pad. The exposed pad MUST be soldered to the ground plane for thermal and electrical reasons. Configure PPS early in firmware to remap peripherals onto available I/O pins without rewiring the PCB. This page consolidates distributor pricing, drop-in alternatives from the PIC32MX1/2 family, and practical design notes - information not assembled on any single distributor or manufacturer page.

Cotización Contacto
PIC32MX220F032D-V/TL - 32-bit MCU 32KB 44-VTLA | Microchip
PIC32MX220F032D-V/TL

PIC32MX220F032D-V/TL - 32-bit MCU 32KB 44-VTLA | Microchip

The Microchip Technology PIC32MX220F032D-V/TL is a 32-bit RISC microcontroller built on the MIPS32 M4K core, operating at 40 MHz with 32 KB of Flash program memory in a 44-pin VTLA (6x6 mm) surface-mount package. It targets cost-sensitive embedded designs that need USB, graphics, audio, and advanced analog peripherals in a small footprint. The device draws less than 0.5 mA/MHz active and includes 8 KB SRAM, 34 I/O pins, and a Charge Time Measurement Unit (CTMU) for mTouch capacitive touch sensing. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and peripherals such as timers, communication controllers, and analog blocks. The PIC32MX2XX family belongs to the 32-bit MCU taxonomy, which sits between 8/16-bit MCUs (lower performance, simpler peripherals) and application processors (much higher frequency, often running Linux). Within the Microchip PIC32 portfolio, the MX1/MX2 sub-family uses the MIPS M4K core at 40-50 MHz and is positioned for general-purpose embedded control with USB and graphics support, while MX3/MX4/MX5/MX6/MX7 series scale up in clock speed and peripheral count. Key features of the PIC32MX220F032D include two I2S/SPI modules for codec and serial communication, Peripheral Pin Select (PPS) for flexible pin mapping, and a Parallel Master Port (PMP) for graphics interfaces. The CTMU enables mTouch capacitive buttons and sliders without external touch ICs. Operating voltage is 2.3 V to 3.6 V, and the device is rated for -40 °C to +105 °C industrial temperatures, with the -V/TL suffix specifying the VTLA package in tube packaging. Architecturally, the PIC32MX220F032D combines a 5-stage pipeline MIPS32 core with a multi-vector interrupt controller, DMA, and a 1 Msps 10-bit ADC. Code executes from internal memory with single-cycle Flash access at 40 MHz, achieving 83 DMIPS. The integrated USB 2.0 full-speed device, PMP, and CTMU eliminate many external components, reducing BOM cost. This part fits USB peripherals, small graphic HMI modules, audio codec interfaces, and capacitive touch user interfaces in industrial and consumer products. Typical deployments include USB sensors, POS terminals, and embedded control panels. When designing with this MCU, allocate the 8 KB SRAM carefully for buffer-heavy USB or audio stacks; consider the PIC32MX170/270 series for larger memory headroom without changing the 44-pin VTLA footprint.

Cotización Contacto
PIC32MX220F032DT-50I/PT - 50MHz 32-bit MCU 32KB Flash | Microchip
PIC32MX220F032DT-50I/PT

PIC32MX220F032DT-50I/PT - 50MHz 32-bit MCU 32KB Flash | Microchip

The Microchip Technology PIC32MX220F032DT-50I/PT is a 32-bit MIPS32 M4K microcontroller running at 50 MHz, integrating 32 KB of Flash program memory and 8 KB of SRAM in a 44-pin TQFP (PT) package. It belongs to the PIC32MX2xx family of general-purpose MCUs aimed at cost-sensitive embedded designs that need USB, advanced analog, and graphics peripherals. A 32-bit microcontroller (MCU) is an integrated processor core with on-chip Flash, RAM, and peripherals (UART, SPI, I2C, timers, ADC, USB) used to implement embedded control logic. Within the broader semiconductor hierarchy, an MCU sits below microprocessors (which need external memory) and above simple digital logic, forming the central decision-making block of almost every modern electronic product. The PIC32MX220 line extends the 16-bit PIC24/dsPIC architecture into 32-bit territory while keeping peripheral and tool compatibility with earlier PIC microcontrollers. Key features of this part include a 50 MHz maximum CPU clock yielding 50 MIPS throughput, 32 KB Flash organized as 32K x 8, 8 KB SRAM, an integrated USB 2.0 full-speed device controller with on-chip transceiver, a 10-bit 1 Msps ADC with up to 13 channels, and a CTMU (Charge Time Measurement Unit) for capacitive touch sensing. The device also offers Peripheral Pin Select (PPS) for flexible I/O mapping, two UART, two I2C, and two SPI/I2S modules, plus a Real-Time Clock and Calendar (RTCC). Architecturally, the PIC32MX220 uses a five-stage MIPS M4K pipeline with separate instruction and data buses (Harvard variant) and a tightly-coupled prefetch cache, which simplifies C-code porting from other MIPS-based platforms while preserving the PIC peripheral ecosystem. The integrated USB PHY eliminates the external transceiver required on older PIC18/24 USB parts, reducing BOM cost and PCB area. Typical applications include USB HID peripherals (keyboards, mice, custom input devices), low-cost graphics and audio playback interfaces, capacitive touch keypads using the on-chip CTMU, sensor hubs for industrial monitoring, and general-purpose 32-bit upgrades for legacy PIC16/PIC24 designs that need more Flash or RAM. The combination of USB device, RTCC, and PPS also makes it attractive for tethered IoT edge nodes. Designers should note that this MCU requires a 2.3 V to 3.6 V supply with a 3.3 V typical rail and benefits from a 10 uF bulk + 100 nF decoupling pair within a few millimetres of the VDD pins. The internal 8 MHz fast RC oscillator can be used with PLL to reach 50 MHz, eliminating the need for an external crystal in cost-sensitive assemblies. This page consolidates distributor pricing, pin-compatible drop-in alternatives in the same 44-TQFP footprint, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto
PIC32MX220F032DT-I/ML - 32-bit MCU, 32KB Flash, 40MHz, 44-QFN | Microchip
PIC32MX220F032DT-I/ML

PIC32MX220F032DT-I/ML - 32-bit MCU, 32KB Flash, 40MHz, 44-QFN | Microchip

The Microchip Technology PIC32MX220F032DT-I/ML is a 32-bit MIPS M4K RISC microcontroller with 32KB of Flash program memory, 8KB of SRAM, and a maximum CPU clock of 40 MHz, packaged in a 44-pin QFN (8x8 mm) with an exposed thermal pad. Operating from a 2.3 V to 3.6 V supply, the part delivers up to 50 MHz/83 DMIPS performance while drawing less than 0.5 mA/MHz active, making it suitable for low-power embedded designs. What is a 32-bit microcontroller? A 32-bit microcontroller (MCU) is an integrated circuit that combines a CPU, memory, and peripherals on a single die. Within the broader taxonomy, the PIC32MX220F032DT belongs to the microcontroller family, which sits under microcontrollers and processors and the broader semiconductor IC category. Unlike 8-bit MCUs, 32-bit cores like MIPS M4K can address more memory, execute instructions in fewer cycles, and handle richer peripherals including USB, I2S, and graphics PMP interfaces. Key features include Peripheral Pin Select (PPS) for flexible signal routing, a Parallel Master Port (PMP) for graphics interfaces, two I2S/SPI modules for codec and serial communications, two UART and I2C modules, and up to four hardware DMA channels with automatic data size detection. The Charge Time Measurement Unit (CTMU) enables mTouch capacitive touch buttons and sliders, and separate PLLs for CPU and USB clocks simplify mixed-clock designs. Architecturally, the PIC32MX220F032DT uses a Harvard cache architecture with separate 16KB instruction and data caches, a 5-stage pipeline, and a single-cycle 32x32 hardware multiply plus zero-wait-state Flash access. The I/O count of 34 pins (28 general-purpose plus dedicated peripherals), 5x 16-bit timers, 5 capture inputs, and 5 compare/PWM outputs make it a general-purpose workhorse. Industrial-grade temperature range of -40C to +105C is supported. Typical applications include low-cost USB peripherals, capacitive touch user interfaces, audio codec front-ends using I2S, low-cost graphics panels driven by PMP, sensor hubs, and battery-powered IoT nodes. The wide 2.3-3.6V operating range and low active current simplify designs running directly from a single Li-ion cell or 3.3V regulated rail. When designing with this MCU, allocate the VDD/VSS pair carefully: this 44-QFN variant requires at least two VDD pins and a thermal pad tied to ground for proper heat and EMI performance. Verify the in-circuit serial programming pins (PGECx/PGEDx) are accessible for field updates, and confirm DMA channel priorities match your real-time data flow. This page synthesizes verified distributor pricing, same-brand drop-in PIC32MX alternatives, and practical design considerations not collated in the manufacturer datasheet.

Cotización Contacto
PIC32MX220F032DT-I/TL - 40MHz 32-bit MCU, 32KB Flash | Microchip
PIC32MX220F032DT-I/TL

PIC32MX220F032DT-I/TL - 40MHz 32-bit MCU, 32KB Flash | Microchip

The Microchip Technology PIC32MX220F032DT-I/TL is a 32-bit MIPS M4K microcontroller operating at 40 MHz, integrating 32 KB of Flash program memory and 8 KB of SRAM in a 44-pin VTLA (6x6 mm) surface-mount package with an exposed thermal pad. It is part of the PIC32MX2xx family, which combines USB 2.0 Full-Speed support, up to 13-channel 10-bit ADC, two I2C and two UART modules, five 16-bit timers, and a Parallel Master Port (PMP) for graphics or external memory interfacing. The part operates from 2.3 V to 3.6 V and offers multiple low-power modes for battery-driven designs. A microcontroller (MCU) is a single-chip processor that integrates a CPU core, memory (Flash for code, SRAM for data), and programmable peripherals. The 32-bit MCU category sits between 8/16-bit microcontrollers (e.g., PIC16, PIC24) and application processors (e.g., Cortex-A). PIC32 devices use the MIPS M4K architecture, which delivers high code density and deterministic interrupt response for embedded control. Within the PIC32 family hierarchy, MX-class devices are general-purpose, MZ-class devices add higher performance and FPU/DSP, and the PIC32MX2xx sub-family targets cost-sensitive USB-enabled designs. Key features of the PIC32MX220F032DT-I/TL include Peripheral Pin Select (PPS) for flexible pin-function remapping, a 4-channel hardware DMA controller with automatic data-size detection, separate PLLs for the CPU and USB clocks (allowing 48 MHz USB without disturbing system timing), and a Charge Time Measurement Unit (CTMU) for capacitive sensing. Five 16-bit timers/counters and a Real-Time Clock/Calendar (RTCC) module support motor control, periodic sampling, and timekeeping. The device is offered in industrial temperature grade (-40C to +85C) and supports JTAG and 2-wire programming/debug. Typical applications include low-cost USB peripherals (HID, CDC, custom classes), small graphical user interfaces using PMP-driven LCDs, sensor hubs for IoT protocol end-points, and battery-powered data loggers. The combination of USB, PMP, and CTMU enables designers to add touch input and USB connectivity with a single chip, replacing discrete USB-to-UART bridges and external ADCs in compact products. When designing with the PIC32MX220F032DT-I/TL, observe the USB electrical requirements (48 MHz clock accuracy, board layout for portable impedance) and provide adequate decoupling on VDD/VUSB. Use MPLAB X IDE with the XC32 compiler; project libraries such as the Microchip USB Framework and Harmony simplify USB stack integration and reduce firmware development time significantly.

Cotización Contacto