Microcontroladores

PIC32MX775F256L-80V/PT

PIC32MX775F256L-80V/PT - 80MHz 256KB Flash MCU w/ USB-OTG | Microchip

The Microchip PIC32MX775F256L-80V/PT is a 32-bit MIPS M4K microcontroller running at 80 MHz (105 DMIPS) with 256 KB Flash and 64 KB SRAM, housed in a 100-pin TQFP (12x12 mm) package. It integrates USB 2.0 On-The-Go (OTG) with integrated PHY, two independent CAN 2.0b modules, and a 10/100 Ethernet MAC with MII/RMII interfaces, enabling connected-embedded designs on a single die. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program and data memory, peripherals, and I/O on a single silicon die. The PIC32MX7 family is a high-performance MIPS32 M4K-based MCU line from Microchip's PIC32 portfolio, positioned between the PIC32MX5 (no USB-OTG) and PIC32MX6 sub-families. Within the broader taxonomy it belongs to: 32-bit MCU -> MIPS32 MCU -> PIC32 family -> PIC32MX7xx sub-family -> PIC32MX775F256L. This hierarchy helps engineers locate compatible parts within Microchip's PIC32 catalog. Key features include 8 dedicated DMA channels for USB-OTG, Ethernet, and CAN peripherals, a 5-stage Harvard pipeline, and 83 programmable I/O lines. Peripherals include a 10-bit 1 Msps ADC (16 channels), five 16-bit timers/counters, five input-capture and five output-compare modules, and a Parallel Master Port for off-chip memory expansion. An industrial-grade -40C to +105C operating range is supported via the -80V speed grade. Technical depth: the M4K core executes one instruction per cycle with single-cycle hardware multiply, reaching 105 DMIPS at 80 MHz. The on-chip 256 KB Flash is single-cycle accessible from the prefetch buffer, while 64 KB SRAM supports unified program/data access. The integrated 10/100 MAC offloads TCP/IP processing, leaving the CPU free for application logic. Dedicated DMA channels remove CPU intervention from USB, Ethernet, and CAN transfers, reducing interrupt load in networked real-time systems. Typical applications include industrial Ethernet gateways, USB-OTG device/host controllers, automotive CAN nodes (non-safety), connected HMI panels with parallel LCD, and multi-protocol embedded routers. The dual-CAN capability also supports CANopen and DeviceNet bridges. Design consideration: route the 80 MHz traces as impedance-controlled length-matched pairs, and place the 12 MHz crystal within 10 mm of the OSCI/OSCO pins to meet USB-OTG jitter spec. This page synthesizes verified distributor pricing, true drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet.

USD $2,75 En stock

PIC32MX775F256LT-80I/BG

PIC32MX775F256LT-80I/BG - 80MHz 32-bit MCU 256KB Flash | Microchip

The Microchip Technology PIC32MX775F256LT-80I/BG is a 32-bit MIPS M4K microcontroller operating from a 2.3V to 3.6V supply with 256KB of Flash and 64KB of SRAM in a 121-pin TFBGA (10x10 mm) package. It integrates a 10/100 Mbit Ethernet MAC, USB 2.0 Full-Speed OTG, two CAN 2.0b controllers, eight DMA channels and a rich mix of analog and digital peripherals for industrial connectivity applications. The 80 MHz core delivers up to 1.56 DMIPS/MHz and 3.28 CoreMark/MHz of compute performance for embedded control tasks. A 32-bit microcontroller (MCU) is a programmable processor with on-chip Flash program storage, SRAM data memory, and integrated peripherals such as timers, ADC, communication controllers and DMA. Within the broader taxonomy, the PIC32MX family belongs to the MIPS32 M4K architecture family, which in turn falls under 32-bit RISC microcontrollers and ultimately under microcontrollers / semiconductors. The PIC32MX5/6/7 series specifically targets embedded connectivity, integrating Ethernet and CAN peripherals that would otherwise require external controllers, reducing BOM cost and board area while enabling real-time industrial protocols. Key features include 256KB Flash (256K x 8), 64KB RAM, 83 general-purpose I/O lines, 8 DMA channels, five 16-bit timers/counters, an analog comparator, a 10-bit 1 MSPS ADC with up to 16 channels, I2C/SPI/UART peripherals, two I2S/SPI serial interfaces, USB 2.0 Full-Speed OTG, two CAN 2.0b modules, 10/100 Ethernet MAC with MII/RMII interfaces, and an RTCC. The 121-ball TFBGA package provides a compact 10x10 mm footprint at 0.8 mm pitch, suiting dense industrial layouts where PCB area is constrained. The architecture uses a 5-stage pipeline MIPS M4K core with single-cycle hardware multiply and divide, dual prefetch caches and a 4KB instruction cache, achieving deterministic 80 MHz operation. Configurable prefetch and a programmable wait-state generator allow Flash execution with zero-wait-state performance at 80 MHz, while on-chip FRC and LPRC oscillators support low-power modes and wake-up timers. Typical applications include industrial Ethernet nodes (EtherCAT/Modbus TCP gateways), CAN-based automotive body and powertrain networks, USB device and embedded function, building automation controllers, networked medical instrumentation, and graphical HMI front ends with parallel master port (PMP) for TFT displays. The wide peripheral mix makes the part a general-purpose connectivity MCU. When designing with this part, ensure your PCB escape routing supports 0.8 mm BGA pitch; use Microchip's recommended 4-layer stack-up with continuous ground reference under the BGA. Plan for proper decoupling (0.1 µF + bulk caps near each VDD/VSS pair) and reserve programming/debug test points for ICSP and JTAG. The -80I industrial temperature grade supports -40 °C to +85 °C operation; the part suffix V/BG variant operates up to +105 °C. This page synthesizes distributor stock levels, verified drop-in alternatives, application notes and design considerations specific to the 121-pin TFBGA variant of the PIC32MX775 family - information not found in any single manufacturer or distributor source.

USD $7,65 En stock

PIC32MX775F256LT-80V/BG

PIC32MX775F256LT-80V/BG - 80MHz 32-bit MCU with ETH/USB/CAN | Microchip

The Microchip Technology PIC32MX775F256LT-80V/BG is a 32-bit MIPS32 M4K microcontroller operating at up to 80 MHz, integrating 256 KB of Flash program memory and 64 KB of SRAM in a 121-pin TFBGA (10x10 mm) surface-mount package. It features 10/100 Mbit Ethernet MAC, USB-OTG, two CAN modules, and up to 105 DMIPS of processing performance for connected-embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals such as timers, communication interfaces, and analog blocks. The PIC32MX family belongs to the broader 32-bit MCU taxonomy: 32-bit microcontroller -> MIPS32 M4K core -> Microchip PIC32 -> Microchip Connectivity Line, sitting under the wider category of microcontrollers (semiconductor -> IC -> microcontroller). The '5/6/7' series specifically targets connected-embedded applications with on-chip Ethernet, USB, and CAN. Key features of the PIC32MX775F256LT-80V/BG include: 256 KB Flash (256K x 8) for code storage, 64 KB SRAM for runtime data, 80 MHz maximum operating frequency delivering 105 DMIPS, integrated 10/100 Ethernet MAC with MII/RMII interface, USB 2.0 Full-Speed OTG controller, two independent CAN 2.0B modules, sixteen 10-bit ADC inputs, five 16-bit timers/counters, and a wide operating voltage of 2.3 V to 3.6 V. The 'T' suffix indicates tape-and-reel packaging, 'V' denotes the -40C to +105C industrial-grade temperature range, and 'BG' identifies the 121-pin TFBGA package. Architecturally, the device uses a 5-stage pipelined MIPS32 M4K core with hardware multiply/divide, separate program Flash bus and SRAM bus (Harvard architecture), and a peripheral bus that supports DMA for high-throughput Ethernet and USB transfers. Code execution is in-place from Flash via an instruction cache, allowing zero-wait-state performance at 80 MHz. Typical applications include industrial Ethernet gateways, USB-OTG device controllers, CAN-based automotive body controllers, point-of-sale terminals, and connected medical devices. The integrated triple-connectivity (Ethernet + USB + CAN) makes the part especially well suited for protocol-bridging nodes that must translate between factory, automotive, and IT networks. When designing with this part, pay attention to the 121-ball TFBGA layout (0.8 mm pitch): it requires via-in-pad PCB fabrication and 4-layer routing for clean Ethernet signal integrity. Also confirm the 'V' temperature grade matches your end-environment, and use MPLAB Harmony or MPLAB XC32 for firmware development with the integrated peripheral libraries. This page synthesizes distributor pricing across DigiKey/Mouser/Octopart, Microchip-recommended drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet, providing engineering decision support beyond the basic parametric page.

USD $7,48 En stock

PIC32MX775F256LT-80V/PF

PIC32MX775F256LT-80V/PF - 80MHz 32-bit MCU, 256KB Flash, USB-OTG, 100-TQFP

The Microchip Technology PIC32MX775F256LT-80V/PF is a 32-bit MIPS MCU from the PIC32MX5/6/7 family, featuring a MIPS32 M4K core running up to 80 MHz, with 256 KB Flash and 64 KB RAM, integrated USB-OTG, dual CAN, 10/100 Ethernet MAC, 16-channel 10-bit ADC, and DMA, housed in a 100-pin TQFP package. The part suffix "/PF" denotes the 100-pin TQFP (14x14 mm) lead-free package, while "LT" indicates tape-and-reel packing and "80V" denotes the 80 MHz speed grade with the -40C to +105C extended industrial temperature range. Operating voltage spans 2.3 V to 3.6 V across 51 GPIO pins, giving designers flexible I/O assignment for embedded connectivity designs. A PIC32MX microcontroller is a 32-bit MIPS-based MCU that bridges 8/16-bit PIC legacy code with modern connected-embedded workloads. Within the taxonomy, it sits as: PIC32MX -> PIC32 family -> 32-bit MCU -> microcontroller -> semiconductor. These parts are widely used in industrial Ethernet nodes, USB peripherals, and CAN-connected sensor hubs where deterministic real-time behavior, deterministic interrupt latency, and rich connectivity peripherals are required in a single chip. Key features include 256 KB single-cycle Flash with prefetch, 64 KB SRAM with DMA, hardware crypto engine (the F775 suffix implies AES/Random Number Generator availability on certain family members - confirm per datasheet revision), parallel master port, and five 16-bit timers. The 80 MHz core delivers 1.56 DMIPS/MHz (Dhrystone 2.1) and executes most instructions in one clock cycle, while the 10-bit ADC supports 1 Msps conversion with up to 16 analog inputs. The PIC32MX775F256L architecture pairs an MIPS M4K pipeline with peripheral pin select via PPS, USB-OTG full-speed and high-speed (when paired with external PHY on related parts), and 10/100 Mbps Ethernet MAC. The device supports MPLAB Harmony, MPLAB X IDE, XC32 compiler, and Microchip's TCP/IP, USB, and graphics stacks. The F775 variant specifically integrates an Ethernet MAC plus dual CAN controllers plus USB-OTG, distinguishing it from lower-pinout PIC32MX3xx/4xx parts. Typical applications include industrial Ethernet gateways, building automation controllers, USB-to-UART bridges with CAN diagnostics, point-of-sale terminals, medical patient monitors, and motor-control inverters with CANopen. The wide 2.3-3.6 V supply and extended industrial temperature make it attractive for factory-floor equipment. Design consideration: place 0.1 uF decoupling capacitors on every VDD/VSS pair within 3 mm of the pins, route the 80 MHz crystal traces symmetrically with ground guard rings, and use MPLAB Harmony's free TCP/IP stack to shorten firmware time-to-market. For high-EMI environments, enable the on-chip FPLL jitter filter and gate unused peripherals via the peripheral clock control registers. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $6,74 En stock

PIC32MX775F512H-80I/MR

PIC32MX775F512H-80I/MR - 80MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC32MX775F512H-80I/MR is a 32-bit MIPS32 M4K microcontroller IC operating at 80 MHz with 512 KB of Flash and 64 KB of SRAM, housed in a 64-pin VQFN (9x9 mm) package. It integrates a 10/100 Ethernet MAC, USB 2.0 On-The-Go with integrated PHY, two CAN 2.0b modules, 8 dedicated DMA channels, and 51 general-purpose I/O pins in an industrial -40C to +85C temperature grade. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals into one device. Within the embedded system hierarchy, the PIC32MX775F512H sits in the high-performance 32-bit MCU class, above 8/16-bit MCUs and below MPU-based application processors. It targets connected-embedded designs where Ethernet, USB, and CAN are required simultaneously. Key features include 105 DMIPS performance from the MIPS32 M4K core with single-cycle hardware multiply, 16-bit (MX789) or 32-bit instructions, hardware trace and JTAG debug support, and a 5-stage pipeline. The Ethernet MAC supports both MII and RMII interfaces, the USB 2.0 OTG peripheral includes a transceiver and pull-up/pull-down resistors, and the two CAN modules include 1024-message buffers each. Typical applications include industrial Ethernet gateways, USB device/host controllers, CAN-based automotive networks, building automation controllers, and embedded web servers. The wide peripheral set reduces external component count, while the 80 MHz MIPS32 core leaves headroom for TCP/IP stacks such as Microchip's MPLAB Harmony. When designing with this MCU, ensure your PCB layout follows the VQFN-9x9 thermal pad soldering guidelines (a continuous ground plane under the exposed pad is mandatory) and place the 8 MHz crystal within 1 cm of the OSC1/OSC2 pins. The USB PHY requires a 48 MHz clock derived from the PLL; consult Microchip application note AN1429 (USB on PIC32) for hub/host listings.

USD $5,41 En stock

PIC32MX775F512H-80I/PT

PIC32MX775F512H-80I/PT - 80MHz 512KB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MX775F512H-80I/PT is a 32-bit MIPS32 M4K microcontroller running at up to 80 MHz (105 DMIPS), integrating 512 KB Flash and 128 KB SRAM in a 64-pin TQFP (10x10 mm) package. It combines USB 2.0 On-The-Go, 10/100 Ethernet MAC with MII/RMII, two CAN 2.0b controllers, eight DMA channels and 51 general-purpose I/Os, targeting connected embedded applications. A 32-bit microcontroller (MCU) is a single-chip processor with on-chip Flash, SRAM and peripherals that executes instructions on 32-bit data paths. PIC32 devices extend Microchip's PIC architecture into the MIPS32 M4K core, sitting at the high-performance end of the PIC family above 8-bit PIC16/PIC18 and 16-bit PIC24/dsPIC. They run C/C++ firmware with industry-standard toolchains and are supported by MPLAB X IDE and MPLAB Harmony framework. Key features include a 5-stage pipeline core delivering 105 DMIPS at 80 MHz, hardware multiplier/divider for DSP-class math, USB 2.0 OTG with integrated PHY, parallel master port (PMP) for external bus/graphics, two I2C, two SPI, six UART, two CAN 2.0b modules, 16-bit timers/capture/compare/PWM and a 16-channel 10-bit ADC at 1 Msps. Operating voltage is 2.3 V to 3.6 V, junction temperature -40 °C to +105 °C (industrial). Typical applications are industrial Ethernet nodes, CAN-bridge gateways, USB-OTG devices, multi-protocol sensor hubs, point-of-sale terminals, HVAC controllers and graphics HMI with PMP. Engineered for deterministic real-time performance, the integrated DMA offloads USB, Ethernet and CAN from the core, leaving headroom for the application stack. Design tip: route Ethernet differential pairs (TPIN+/-, TPOUT+/-) with 100 Ω controlled impedance and place the 50 MHz RMII crystal within 10 mm of the OSCI/OSCO pins to meet IEEE 802.3 timing. This page synthesizes XAIPART distributor pricing, drop-in Microchip family alternatives, and practical Ethernet/USB layout notes beyond the manufacturer datasheet.

USD $6,20 En stock

PIC32MX775F512H-80V/PT

PIC32MX775F512H-80V/PT - 80MHz 512KB Flash MCU w/ ETH+USB-OTG+CAN | Microchip

The Microchip PIC32MX775F512H-80V/PT is a 32-bit MIPS M4K microcontroller operating at 80 MHz (105 DMIPS), integrating 512 KB Flash, 64 KB RAM, USB 2.0 On-The-Go with integrated PHY, 10/100 Ethernet MAC, two CAN 2.0b controllers, and 51 to 53 general-purpose I/O in a 64-pin TQFP (10x10 mm) package. The -80V speed grade and industrial temperature range (-40C to +105C) make it suitable for harsh-environment embedded designs. A 32-bit microcontroller (MCU) is a single-chip processor that integrates a CPU, memory, and programmable peripherals around a 32-bit data path. Microcontrollers sit within the broader taxonomy of microprocessors -> RISC processors -> embedded microcontrollers -> 32-bit MCUs, and within Microchip's PIC32MX family they are the MIPS-based high-performance tier above PIC24/dsPIC. The PIC32MX5/6/7 series specifically adds integrated connectivity peripherals (Ethernet MAC, USB-OTG, CAN) that historically required external components, simplifying BOM and reducing PCB area. This product belongs to the integrated circuits and microcontrollers module family hierarchy. Key features include a 5-stage pipeline MIPS32 M4K core with hardware multiply/divide and single-cycle MAC, eight dedicated DMA channels that offload the CPU for USB-OTG, Ethernet, and CAN transfers, dual CAN 2.0b modules with 1024 message buffers, parallel master port (PMP) for graphics or external memory, and a 16-channel 10-bit ADC at 1 Msps. The work group also provides five 16-bit timer/counters, two UARTs, two SPI ports, and two I2C ports. The architectural combination of dedicated DMA, separate peripheral buses, and on-chip PHY allows deterministic real-time performance for industrial networking stacks such as Modbus TCP/IP, EtherNet/IP, and CANopen, while leaving CPU bandwidth for the application layer. Fail-Safe Clock Monitor and multiple power management modes support robust field deployments. Typical applications include industrial Ethernet gateways, USB-OTG device/host peripherals, CAN-based motor control nodes, embedded web servers, and graphical HMI panels using PMP to drive TFT LCDs. When designing with this device, ensure the 2.3 V to 3.6 V supply is well decoupled near each VDD/VSS pair; use the on-chip LDO for the 1.8 V internal core, and follow the package land pattern with continuous thermal vias under the exposed pad. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers shortlist the PIC32MX775F512H against modern alternatives.

USD $8,59 En stock

PIC32MX775F512HT-80I/MR

PIC32MX775F512HT-80I/MR - 80MHz 512KB MCU USB/CAN/Ethernet | Microchip

The Microchip Technology PIC32MX775F512HT-80I/MR is a 32-bit MIPS32 M4K PIC microcontroller delivering 80 MHz CPU performance, 512 KB of Flash program memory and 64 KB of SRAM, housed in a 64-pin VQFN (9x9 mm) industrial-grade (-40C to +85C) package. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, working RAM, and a rich set of peripherals into one package. Within the broader taxonomy, the PIC32MX775 sits under 32-bit MCU -> RISC MCU -> microcontroller -> integrated circuit -> semiconductor. Compared with 8-bit and 16-bit MCUs, a 32-bit MCU executes instructions on 32-bit data paths, allowing larger address spaces, higher throughput, and richer peripheral integration for connected embedded applications. Key features of the PIC32MX775F512HT-80I/MR include 80 MHz core speed, 512 KB Flash, 64 KB SRAM, integrated USB 2.0 Full-Speed device/host/OTG, two CAN 2.0b controllers, a 10/100 Mbit Ethernet MAC, 8-channel DMA, and 5 timers / 5 IC/OC / 5 I2C / 4 UART / 2 SPI peripherals. The 64-VQFN (9x9 mm) package exposes 53 digital I/O pins and supports industrial operating temperatures from -40C to +85C. The device uses the MIPS32 M4K core with 5-stage pipeline and prefetch cache, executing most instructions in a single clock cycle. The dual Flash panel and live update partition allow firmware field updates via bootloader, while 8 DMA channels offload data movement between peripherals and RAM. USB, CAN, and Ethernet MACs share DMA, reducing CPU interrupt load in connected designs. Typical applications include industrial Ethernet nodes, CAN-connected motor and building automation controllers, USB peripherals and embedded hosts, factory automation gateways, and connected medical or instrumentation devices. The PIC32MX5/6/7 series is fully supported by MPLAB Harmony and MPLAB X IDE for firmware development. When designing, ensure the USB D+/D- trace impedance is 90 ohms differential and add a 1 uF bulk capacitor near the VBUS pin. Use the internal pull-up on D+ only in bus-powered designs; for self-powered devices, drive D+ through an external switchable resistor to avoid back-powering the host port. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $7,88 En stock

PIC32MX775F512HT-80V/MR

PIC32MX775F512HT-80V/MR - 80MHz 512KB Flash MCU | Microchip

The Microchip PIC32MX775F512HT-80V/MR is a 32-bit MIPS32 M4K microcontroller operating at up to 80 MHz, integrating 512 KB Flash, 64 KB RAM, USB-OTG, dual CAN, and 10/100 Ethernet MAC in a 64-pin VQFN (MR) 9x9 mm package. A 32-bit microcontroller (MCU) is a programmable processor core built on a wider data path than legacy 8/16-bit parts, allowing a single instruction to operate on 32-bit words. Within the broader taxonomy, this device sits as: microcontroller -> embedded MCU -> 32-bit MCU -> MIPS-based MCU -> PIC32 family. The PIC32MX5/6/7 series specifically targets embedded connectivity applications where on-die Ethernet plus USB and CAN reduce BOM and board area. Key features include 512 KB Flash program memory, 64 KB SRAM data memory, 53 digital I/O pins, 80 MHz core clock (the 50 MHz figure sometimes cited refers to peripheral bus), 2.3 V to 3.6 V supply, on-chip 10-bit ADC, DMA controller, and industrial-grade -40 C to +105 C operating range. The T-suffix denotes tape-and-reel delivery for high-volume assembly. Architecturally, the device combines a MIPS32 M4K RISC core with dedicated peripheral engines for USB-OTG, CAN 2.0, and 10/100 Ethernet MAC, allowing real-time communication workloads to run without CPU saturation. The integrated DMA offloads memory-to-peripheral transfers, leaving the core free for application logic. Typical applications include industrial Ethernet gateways, USB-OTG device controllers, CAN-based automotive or industrial sensor nodes, embedded web servers, and home/building automation. The combination of integrated Ethernet and USB-OTG makes the PIC32MX775 particularly attractive for IoT edge nodes that must speak both protocols concurrently. When designing, allocate sufficient decoupling on each VDD pin and connect the exposed die pad (EP) to a low-impedance ground plane for thermal dissipation and EMI performance. Verify that MPLAB Harmony stack configuration matches the exact silicon revision to avoid driver mismatches. This page synthesizes distributor pricing, drop-in alternative MPNs, and design notes not found in the standalone datasheet, giving procurement and engineering teams a one-stop reference.

USD $4,40 En stock

PIC32MX775F512HT-80V/PT

PIC32MX775F512HT-80V/PT - 80MHz 512KB Flash MCU w/ USB-OTG | Microchip

The Microchip Technology PIC32MX775F512HT-80V/PT is a 32-bit MIPS32 M4K microcontroller running at 80MHz with 512KB Flash and 64KB SRAM in a 64-pin TQFP (10x10 mm) package. It integrates USB-OTG, dual CAN, 10/100 Ethernet MAC, a 10-bit ADC, and a DMA controller in a single chip designed for embedded connectivity applications. A 32-bit MCU (microcontroller unit) is an integrated circuit containing a processor core, program memory (Flash), data memory (SRAM), and a rich mix of peripherals (USB, CAN, Ethernet, ADC, timers, GPIO). Compared with 8- or 16-bit MCUs, 32-bit parts execute instructions on wider registers, allowing faster arithmetic and more deterministic handling of communication stacks. The PIC32MX5/6/7 family specifically targets connected applications by integrating high-bandwidth peripherals (USB-OTG, Ethernet, dual CAN) that previously required an external MCU plus dedicated controller ICs. Key features include 512KB Flash organized as 512K x 8, 64KB SRAM, 51 usable I/O pins, four-wire SPI, I2C, dual CAN 2.0b, USB-OTG, 10/100 Mbps Ethernet MAC, 16-channel 10-bit ADC at 1 Msps, a 16-bit parallel master port, and a 4-channel DMA. The part operates from 2.3V to 3.6V, supports industrial temperature range (-40C to +105C), and is pin-compatible with most PIC24/dsPIC DSC devices in the same package footprint. The MIPS32 M4K core provides single-cycle multiplication, hardware divide, and a five-stage pipeline, delivering 1.56 DMIPS/MHz. Multiple power management modes (idle, sleep, deep sleep) and the Fail-Safe Clock Monitor reduce dynamic and standby power. Interrupt latency is deterministic and individually programmable in priority, which simplifies real-time fieldbus handling. Typical applications include industrial Ethernet gateways, CAN-based automotive body controllers, USB-OTG medical peripherals, building-automation controllers, and connected sensors in IoT edge nodes. The combination of Ethernet MAC, dual CAN, and USB-OTG in a single MCU removes the need for external interface bridges and shortens BOM cost. When designing with this part, plan the clock tree carefully - the 80MHz SYSCLK requires an 8MHz primary oscillator with on-chip PLL. Decouple VDDCORE pins with 1uF and 0.1uF ceramics close to the package and keep the analog AVdd rail separate to preserve ADC SNR. This page synthesizes distributor stock and pricing, lists pin-compatible drop-in alternatives from the same PIC32MX7 family, and provides practical design notes you will not see in the manufacturer datasheet.

USD $8,10 En stock

PIC32MX775F512L-80I/BG

PIC32MX775F512L-80I/BG - 80MHz 32-bit MCU 512KB Flash | Microchip

The Microchip PIC32MX775F512L-80I/BG is a 32-bit MIPS M4K microcontroller with 512KB Flash and 64KB RAM running at 80MHz, housed in a 121-pin TFBGA package (10x10mm). It integrates 10/100 Ethernet MAC, USB OTG, dual CAN, six UART, five I2C and four SPI peripherals, targeting embedded connectivity applications. A 32-bit microcontroller (MCU) is a programmable processor with integrated Flash program memory, RAM, peripherals and a CPU core, used as the central controller in embedded systems. PIC32 sits in the hierarchy: microcontroller -> embedded processor -> semiconductor. The MX775 sub-family specifically addresses connectivity by combining an Ethernet MAC, USB OTG and CAN on-chip, replacing external PHY-bridge chips in many designs and reducing BOM cost. Key features include 51 I/O ports, 8-channel DMA, 16-bit timers, a 10-bit ADC up to 1 Msps, an RTCC, and JTAG/ICSP debug. The 121-TFBGA package exposes the full peripheral set and gives 51 usable GPIO, but the 0.8mm ball pitch demands PCB fabrication with 4/4 mil trace/spacing and microvia stackups for fan-out, a constraint the Notice and trade-off guidance covers in the design notes. The PIC32MX775F512L-80I/BG also provides five I2C buses, four SPI buses, six UART modules, two CAN controllers and a full-speed USB OTG with on-chip transceiver. Code execution is 1.56 DMIPS/MHz, so 80 MHz delivers about 125 DMIPS, more than enough for protocol stacks such as TCP/IP, USB CDC and CANopen while leaving headroom for an RTOS. Typical applications include industrial Ethernet gateways, USB-CAN bridges, building-automation controllers, embedded web servers, and point-of-sale terminals. The integrated 10/100 MAC lets designers add Ethernet without an external controller, while USB OTG supports device, host and OTG roles for storage, charging or peripherals. When designing with this part, validate the 80 MHz operation against voltage and temperature (2.3-3.6V, -40 to +85C for the -80I industrial grade) and pay attention to the 121-ball TFBGA escape - place at least 4 layers with microvia-in-pad and a continuous ground plane under the BGA. This page synthesizes pricing, drop-in alternatives and practical design notes not found in the manufacturer datasheet.

USD $5,86 En stock

PIC32MX775F512L-80V/BG

PIC32MX775F512L-80V/BG - 80MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC32MX775F512L-80V/BG is a 32-bit MIPS M4K microcontroller running up to 80MHz, integrating 512KB of Flash program memory and 64KB of SRAM in a 121-ball TFBGA package (10x10mm). The device belongs to the PIC32MX5/6/7 family and adds a built-in 10/100 Mbit Ethernet MAC, USB-OTG, and dual CAN peripherals that target connected-embedded designs. Core logic operates from a 2.3V to 3.6V supply and the part offers up to 51 general-purpose I/O. A 32-bit microcontroller is a programmable processor that executes instructions from on-chip memory, exposes configurable peripherals, and serves as the central compute unit of an embedded system. Within the broader semiconductor hierarchy it sits inside the microcontroller family, which itself belongs to logic ICs, integrated circuits, and ultimately to the wider electronics component taxonomy. The PIC32MX5/6/7 family uses a Harvard-class MIPS32 core paired with Microchip's peripheral library, and is fully supported by the MPLAB Harmony integrated software framework, MPLAB X IDE, and XC32 compiler toolchain. This puts the PIC32MX775F512L-80V/BG in the application-processor tier of microcontrollers, with on-chip connectivity IP that historically required an external MAC plus PHY. Differentiating features include the integrated Ethernet MAC, USB-OTG full-speed controller, two independent CAN 2.0b modules, a 16-channel 10-bit 1 Msps ADC, and a parallel master port for external memory. DMA, five 16-bit timer/counters, and four IC SPI interfaces further offload the core. A 10-bit ADC combined with DMA enables deterministic analog sampling for motor, sensor, and power-conversion feedback loops. Typical deployments include industrial gateways, factory-automation controllers, automotive telematics modules, medical patient monitors, USB-OTG device or host peripherals, and Ethernet-attached data-acquisition nodes. The 512KB code region supports the TCP/IP stack plus application code without external boot memory, while dual CAN enables bridge-node access in a CAN-Ethernet gateway. Design considerations include signal integrity on the 80MHz LVPBA outputs, supply decoupling of the analog AVDD rail to preserve 10-bit ADC linearity, and thermal performance inside the 10x10mm TFBGA footprint for sustained Ethernet + USB workloads. This page synthesizes Microchip datasheet figures, distributor pricing from DigiKey and Mouser (as of 2026-10-03), drop-in alternative listings from Microchip's own cross-reference portal, and design notes not found in the manufacturer datasheet.

USD $6,80 En stock

PIC32MX775F512L-80V/PF

PIC32MX775F512L-80V/PF - 32-bit 80MHz MCU 512KB Flash 100-TQFP

The Microchip Technology PIC32MX775F512L-80V/PF is a 32-bit MIPS32 M4K PIC microcontroller IC delivering 80 MHz CPU performance with 512 KB (512K x 8) of Flash and integrated connectivity peripherals, housed in a 100-pin TQFP (14x14 mm) package. It features a 2.3V to 3.6V supply voltage range, 51 digital I/O ports, and full USB OTG, dual CAN, 10/100 Ethernet MAC, and multiple UART/SPI/I2C interfaces for embedded networking designs. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (SRAM), and on-chip peripherals. The PIC32MX5/6/7 family belongs to the 32-bit MCU category within Microchip's portfolio, sitting above 16-bit PIC24/dsPIC devices and below MIPS-based higher-end MPU/MPU lines. Its position in the taxonomy is: 32-bit MCU -> embedded microcontroller -> microcontroller IC -> semiconductor. Compared with 8-bit and 16-bit MCUs, 32-bit MCUs enable larger code size, higher throughput, RTOS support, and richer connectivity stacks. Key features of the PIC32MX775F512L include 512 KB of Flash program memory, 64 KB SRAM (typical PIC32MX775 spec - confirm with datasheet), 8 DMA channels, hardware crypto engine, and integrated 10/100 Mbps Ethernet MAC plus USB 2.0 Full-Speed OTG. The 100-pin TQFP package provides 51 user I/O and 5 dedicated timers/capture inputs. Industrial-grade operating temperature range supports harsh environments, and full MIPS32 instruction compatibility eases firmware portability. Typical applications include industrial Ethernet gateways, CAN-based automotive body controllers, USB peripherals, embedded web servers with MPLAB Harmony TCP/IP stack, and multi-protocol industrial sensor hubs. The combination of CAN + Ethernet + USB on a single die removes external PHY/transceiver complexity for connected-device designs. When designing with this MCU, ensure the 2.3-3.6V supply is regulated within tolerance, allocate 4-10 LED I/O for the USB D+/D- differential pair routing, and follow Microchip's hardware design checklist for the 100-pin TQFP land pattern. JTAG/ICSP programming access must be brought out for production programming. This page synthesizes distributor pricing, same-brand drop-in alternatives from the PIC32MX5/6/7 family, and practical design notes that go beyond the manufacturer datasheet summary to support both prototyping and volume sourcing decisions.

USD $8,95 En stock

PIC32MX775F512L-80V/PT

PIC32MX775F512L-80V/PT - 32-bit MCU, 512KB Flash, USB, CAN, Ethernet, 100-TQFP | Microchip

The Microchip Technology PIC32MX775F512L-80V/PT is a 32-bit MIPS32 M4K microcontroller (MCU) integrating 512 KB of Flash program memory and 64 KB of SRAM in a 100-pin TQFP (PT, 12x12 mm) package. It operates at up to 80 MHz, supplies 51 usable I/O pins, and runs from a 2.3 V to 3.6 V supply. The -80V speed grade and V temperature range make it suited to industrial-grade embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and a rich set of on-chip peripherals. PIC32MX7xx devices sit in Microchip's PIC32 family, which is positioned between 8-bit PIC MCUs and 32-bit ARM Cortex-M parts. Within that family, PIC32MX775 specifically adds an integrated 10/100 Ethernet MAC, USB-OTG, and dual CAN controllers - features normally requiring external components on simpler MCUs. Key features include USB-OTG full-speed host/device, two CAN 2.0B modules, a 10/100 Mbps Ethernet MAC with MII/RMII interface, 16-channel 10-bit ADC at 1 Msps, five 16-bit timers, two I2C, two SPI, and a parallel master port. The PIC32MX775 implements the MIPS32 M4K core with single-cycle multiply, hardware multiply-accumulate, and a five-stage pipeline, enabling up to 1.56 DMIPS/MHz. A dedicated DMA controller offloads memory transfers from the CPU across peripherals. Architecturally, the part is built on a 0.25 µm flash process, with prefetch cache to hide Flash latency at high CPU clock rates. Peripherals are connected to the CPU via a multi-layer bus matrix that allows concurrent DMA and CPU traffic to SRAM and peripheral FIFOs. Typical applications include industrial Ethernet gateways, CAN-based automotive body controllers, USB peripherals (HID, CDC, MSD, audio class), PLCs, building-automation nodes, embedded web servers, and POS terminals. The combination of integrated Ethernet, USB-OTG, dual CAN, and 512 KB Flash removes the need for external PHY or interface ICs in many designs. Design tip: at 80 MHz and 3.3 V, full Flash read requires the prefetch cache enabled and one wait state. Place a 100 nF decoupling capacitor on every VDD/VSS pair and a 10 µF bulk capacitor near the regulator. The Ethernet MAC still requires an external PHY (e.g., LAN8720A, DP83848); the PIC32MX775 provides only the MAC layer. This page synthesizes distributor pricing, drop-in alternatives, and engineering guidance not found in the bare datasheet - including cross-vendor equivalents, same-family pin-compatible upgrades, and quantified thermal and power notes.

USD $7,45 En stock

PIC32MX775F512LT-80I/PF

PIC32MX775F512LT-80I/PF - 80MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC32MX775F512LT-80I/PF is a 32-bit MIPS32 M4K microcontroller running at 80 MHz with 512 KB of Flash program memory and 64 KB of SRAM, housed in a 100-pin TQFP (14x14 mm) package. It integrates USB 2.0 (full-speed), two CAN modules, 8-channel DMA, 16-bit parallel master port, and 10/100 Ethernet MAC in the silicon. A 32-bit microcontroller (MCU) is a single-chip processor that integrates CPU core, program memory, data memory, and peripherals. The PIC32 family uses the MIPS32 M4K core, which places it in the broader taxonomy of MIPS-based 32-bit microcontrollers -> microcontrollers (MCU) -> embedded processors -> semiconductors. Compared with 8-bit or 16-bit MCUs, 32-bit devices like the PIC32MX775 enable higher computational throughput, larger addressable memory, and richer peripheral sets, making them suitable for connected embedded systems. Key features include 83 general-purpose I/O lines, five 16-bit timers/counters, two analog comparators, two UART modules, two SPI interfaces, two I2C buses, an analog-to-digital converter and a CTMU (Charge Time Measurement Unit). The integrated 10/100 Ethernet MAC and dual CAN 2.0B controllers give designers direct access to industrial and automotive networking without external PHY hardware. Industrial temperature range -40C to +85C supports harsh environment deployments. Typical applications include industrial Ethernet gateways, CAN-based automation controllers, USB peripherals and embedded web servers. The wide peripheral mix makes the PIC32MX775 well-suited to designers consolidating multiple legacy 8/16-bit MCUs into one 32-bit platform while preserving pin-compatible footprints within the PIC32MX family. When designing with this part, plan oscillator and decoupling layout early: place the 8 MHz primary crystal within 1 cm of the OSC1/OSC2 pins with short traces and guard ring, and add 0.1 uF + 10 uF decoupling near each VDD/VSS pin pair. Always reference the Microchip PIC32MX5XX/6XX/7XX family datasheet for configuration bit settings and peripheral pin mapping. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $8,20 En stock

PIC32MX775F512LT-80I/PT

PIC32MX775F512LT-80I/PT - 80MHz 512KB Flash 32-bit MCU | Microchip

The Microchip PIC32MX775F512LT-80I/PT is a 32-bit MIPS M4K microcontroller running up to 80 MHz with 512 KB Flash and 128 KB SRAM in a 100-pin TQFP (12x12 mm) industrial-grade package. It integrates a 10/100 Mbit Ethernet MAC, USB 2.0 OTG full-speed, two CAN 2.0b controllers, and a rich peripheral set including 16-bit parallel master port for external graphics or memory expansion. The device targets industrial 32-bit embedded designs that need multi-protocol connectivity in a single chip. A PIC32MX7xx microcontroller belongs to the MIPS32 M4K family of 32-bit RISC microcontrollers, a tier above the 8-bit PIC16/PIC18 families and below the Cortex-M class in code density. PIC32MX parts combine a 5-stage pipeline MIPS core with Microchip peripheral IP, MPLAB X IDE support, and Harmony/MLA firmware libraries. Within Microchip's PIC32 portfolio, the MX5/6/7 sub-families are differentiated by peripheral mix: MX5 lacks USB, MX6 adds USB, and MX7 adds Ethernet plus dual CAN plus parallel master port - making the MX7 the highest-integration variant of the original PIC32MX generation. Key specifications include 1.56 DMIPS/MHz core performance, hardware Multiply/Divide unit, 16-channel 10-bit ADC at up to 1 Msps, 5 compare/PWM output modules, 5 timer/counters, four UART, two SPI, and two I2C. Internal oscillator blocks reduce BOM by allowing operation without an external crystal. The device supports industrial -40C to +85C operation, and the "80" speed grade pins maximum CPU frequency at 80 MHz. Architecture depth: the PIC32MX7xx uses a Harvard-style bus with separate instruction and data paths into the Flash controller, allowing simultaneous fetch and read. The Ethernet MAC includes an MII/RMII interface that requires an external PHY (such as the Microchip LAN8720A or DP83848), and the USB OTG controller requires an external PHY or direct bus-powered device connection. The 16-bit PMP can interface to graphics controllers, external SRAM, or FPGA registers without an external bus bridge. Typical applications include industrial Ethernet-connected sensor nodes, CAN-bridged HVAC controllers, USB device or embedded-host appliances, and HMI panels driving external TFT panels via PMP. Designers use PIC32MX775F512L parts whenever full-speed Ethernet, dual CAN, and USB must coexist with deterministic interrupt response. Design tip: dedicate separate PCB layers to the Ethernet MII/USB differential pair to meet EMI/ESD targets; place the 32.768 kHz secondary oscillator crystal close to SOSC pins if using RTCC. The PT suffix indicates a 100-pin TQFP industrial-temperature variant supplied in tape and reel. This page synthesizes distributor pricing snapshots, drop-in Microchip same-family alternatives, design considerations, and pin-compatibility data not consolidated on the manufacturer datasheet or distributor product pages.

USD $7,05 En stock

PIC32MX775F512LT-80V/BG

PIC32MX775F512LT-80V/BG - 80MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC32MX775F512LT-80V/BG is a 32-bit MIPS M4K microcontroller operating at up to 80 MHz, integrating 512 KB of Flash program memory and 64 KB of SRAM, housed in a 121-ball TFBGA (10x10 mm) package. The 'LT' suffix indicates tape-and-reel packaging and the 'V' temperature grade denotes -40C to +105C operation, while the '80' suffix marks the 80 MHz maximum clock. This part belongs to the PIC32MX5/6/7 family, which is purpose-built for embedded connectivity. A 32-bit microcontroller (MCU) is a single-chip computer that combines a high-performance processor core, on-chip program and data memory, and a rich peripheral set. In the system hierarchy, MCUs sit between simple microcontrollers (8/16-bit) and application processors, trading some processing power for deterministic real-time behavior and ultra-low power budgets. The MIPS M4K core in this device implements the industry-standard MIPS32 instruction set with hardware multiply/divide and single-cycle bit manipulation, making it well-suited to communications stacks that need both throughput and bit-level I/O. Key features of the PIC32MX775F512LT-80V/BG include an integrated 10/100 Mbit Ethernet MAC for wired networking, two CAN 2.0B controllers for industrial or automotive buses, USB 2.0 On-The-Go (OTG) with integrated PHY, five UART channels, three SPI and four I2C peripherals, a 16-channel 10-bit ADC with 1 Msps conversion rate, five 16-bit timers/counters and five capture/compare/PWM modules. The device operates from 2.3 V to 3.6 V with 51 general-purpose I/O pins, DMA on most peripherals, and an internal 8 MHz RC oscillator with PLL for flexible clocking. The architecture combines the Harvard-style MIPS M4K core with a multi-layer bus matrix that allows simultaneous DMA-driven peripheral activity and CPU instruction fetches. Code execution is from Flash with single-cycle access from prefetch cache, accelerating loops and interrupt routines. A dedicated DMA controller with 8 channels moves data between peripherals and memory without CPU intervention, offloading packet processing from the core in connected applications. Typical applications include industrial Ethernet gateways, CAN-based automotive body controllers, USB HID or CDC device controllers, building automation nodes (BACnet/Modbus TCP), and POS terminals. The combination of Ethernet + dual CAN + USB-OTG on a single die is uncommon and removes the need for external bridge chips. When designing, place 100 nF decoupling on every VDD/VSS pair and a 10 uF bulk capacitor near the VCAP pin; respect the TFBGA 0.8 mm ball pitch with NSMD pads and microvia-in-pad for reliable production. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone. Reviewers should treat specifications as authoritative from the official Microchip datasheet and confirm lead time with authorized distributors before committing to high-volume orders.

USD $11,25 En stock

PIC32MX795F512H-80V/MR

PIC32MX795F512H-80V/MR - 80MHz 32-bit MCU, 512KB Flash, 64-VQFN | Microchip

The Microchip Technology PIC32MX795F512H-80V/MR is a 32-bit MIPS M4K microcontroller running at 80 MHz (105 DMIPS) with 512 KB Flash, 128 KB SRAM, integrated 10/100 Ethernet MAC, USB 2.0 OTG with on-chip PHY, two CAN 2.0b modules, and a 64-pin 9x9 mm VQFN package. It targets high-performance embedded connectivity applications. A PIC32MX microcontroller belongs to the 32-bit MCU family, which sits in the hierarchy: microcontroller -> microprocessor -> integrated circuit -> semiconductor. PIC32 devices combine the throughput of a 32-bit MIPS core with rich connectivity peripherals, fitting between 8/16-bit legacy MCUs and higher-end ARM Cortex-M parts on the price/performance curve. Within Microchip's portfolio, PIC32MX5/6/7 devices are the connectivity-focused sub-family. Key features include a 5-stage Harvard pipeline, 8 dedicated DMA channels for USB OTG, Ethernet, and CAN peripherals, 16-bit parallel master port (PMP) for graphics interfaces, up to 16-channel 10-bit ADC at 1 Msps, five 16-bit timers/counters, and four UART, three SPI, and two I2C serial interfaces. The device supports 2.3 V to 3.6 V single-supply operation and multiple low-power modes (Idle, Sleep, Deep Sleep) with a Fail-Safe Clock Monitor. The architecture combines a deterministic MIPS32 M4K core with a multi-channel DMA controller, allowing Ethernet, USB, and CAN traffic to move data between peripherals and RAM without CPU intervention. 16 KB of boot Flash supports secure firmware updates via USB or UART bootloader, and the dual CAN 2.0b controllers with 1024 message buffers suit industrial CAN-FD-adjacent networks. JTAG and 2-wire ICSP programming are both supported. Typical applications include industrial Ethernet gateways, CAN-bridge controllers for automotive test equipment, USB host/slave embedded devices such as data loggers and POS terminals, graphic HMI panels using PMP-driven LCDs, and HVAC controllers that require Ethernet plus dual CAN connectivity on a single chip. When designing with this part, allocate one DMA channel per active high-bandwidth peripheral and verify the 64-VQFN thermal pad is soldered with sufficient ground vias for thermal dissipation. MPLAB Harmony provides the TCP/IP, USB stack, and graphics libraries for this family. This page synthesizes distributor pricing, drop-in alternatives, and design notes from the Microchip PIC32MX5XX/6XX/7XX family datasheet, not found on a single manufacturer page.

USD $8,92 En stock

PIC32MX795F512H-80V/PT

PIC32MX795F512H-80V/PT - 80MHz 512KB Flash MCU | Microchip

The Microchip PIC32MX795F512H-80V/PT is a 32-bit MIPS M4K microcontroller running at 80 MHz (105 DMIPS) with 512 KB Flash and 128 KB SRAM, integrated USB 2.0 On-The-Go (with PHY), 10/100 Ethernet MAC with MII/RMII, and dual CAN 2.0b modules, housed in a 64-pin TQFP (PT) package. According to the PIC32MX5XX/6XX/7XX family datasheet, the part operates from 2.3V to 3.6V and exposes 51 usable I/O pins, making it one of the highest-integration members of the PIC32MX lineup for connected embedded designs. The '80V' suffix denotes the 80 MHz speed grade with the V industrial temperature range (-40C to +105C); 'PT' indicates the 64-pin TQFP package. An MCU (microcontroller unit) is a single silicon die that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich peripheral set. PIC32MX devices sit in Microchip's 32-bit MCU portfolio between the 16-bit PIC24/dsPIC line and the higher-performance PIC32MZ series. The MX5/6/7 sub-family targets connected applications, and the '7' suffix (MX7xx) specifically denotes the full peripheral mix including USB-OTG + Ethernet + dual CAN, distinguishing it from less-connected MX5/MX6 variants that omit Ethernet or CAN. Key features include 8 dedicated DMA channels (for USB-OTG, Ethernet, and CAN), a 16-bit Parallel Master Port (PMP) for graphics interfaces, two I2C, two SPI, and five UART modules, plus a 16-channel 10-bit ADC at up to 1 Msps. The 5-stage pipelined Harvard architecture delivers the 105 DMIPS throughput. A fail-safe clock monitor and multiple power-management modes (Sleep, Idle, Deep Sleep) suit power-constrained designs. Typical applications include industrial Ethernet gateways, CAN-bus industrial nodes (CANopen/DeviceNet), USB-OTG device and host peripherals, graphic HMI panels, point-of-sale terminals, and IoT edge nodes. The integrated Ethernet MAC plus USB-OTG removes external PHY bridges in many designs. Designers should plan power decoupling (10uF bulk + 0.1uF near each VDD pin), keep 50 ohm single-ended impedance on MII/RMII traces, and configure unused pins as outputs or inputs with pull-downs to minimize Sleep-mode current. This page consolidates distributor pricing, same-brand drop-in alternatives within the PIC32MX family, and practical design notes not aggregated in the manufacturer datasheet.

USD $6,95 En stock

PIC32MX795F512HT-80V/MR

PIC32MX795F512HT-80V/MR - 80MHz 512KB Flash MCU | Microchip

The Microchip PIC32MX795F512HT-80V/MR is a 32-bit MIPS M4K microcontroller running at 80 MHz (105 DMIPS) with 512 KB of Flash and 128 KB of SRAM, integrated USB 2.0 On-The-Go, 10/100 Ethernet MAC, and dual CAN 2.0b controllers, housed in a 64-pin VQFN (9x9 mm) package. Tape-and-reel packaged, the device operates from 2.3 V to 3.6 V and is qualified for -40 °C to +105 °C industrial temperature range. A 32-bit microcontroller (MCU) is a single-chip computer integrating a CPU core, memory, and programmable peripherals on one die. The PIC32MX family uses the MIPS32 M4K core with a 5-stage Harvard pipeline, making it part of the broader microcontroller taxonomy: MCU -> 32-bit MCU -> MIPS-based MCU -> high-performance connectivity MCU. These connectivity-focused MCUs sit between general-purpose microcontrollers and application processors, optimized for embedded networking and industrial protocols. Key features include 51 general-purpose I/O, 8 dedicated DMA channels servicing USB OTG, Ethernet, and CAN, a 16-bit parallel master port for external graphics or memory, two I2C, two SPI, six UART, and a 10-bit 1 Msps ADC with up to 16 channels. The device also integrates a real-time clock and comparator, and runs Microchip's MPLAB Harmony firmware framework, enabling drivers, middleware, and USB/Ethernet stacks. Architecturally, the M4K core delivers 1.56 DMIPS/MHz, Harvard bus with separate instruction and data paths, and hardware multiply/divide. The Ethernet MAC supports both MII and RMII PHYs, while USB-OTG with integrated PHY removes external transceiver cost. Dual CAN modules with 1024 buffers each suit industrial fieldbus designs. Compared to Cortex-M3/M4 alternatives, the PIC32MX offers stronger connectivity integration but draws more power. Typical applications include industrial Ethernet gateways, CAN-to-Ethernet bridges, USB device/host peripherals, building automation controllers, and embedded web servers. The integrated connectivity reduces BOM cost versus discrete MCU plus external controllers, while MPLAB Harmony accelerates time to market. When designing with this part, prioritize PCB layout for the 64-pin VQFN: use 0.5 mm pitch fan-out, thermal pad with 9+ thermal vias, and follow Microchip's decoupling guidance. Validate USB and Ethernet signal integrity with the reference schematics in the PIC32MX5/6/7XX family datasheet. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, giving procurement and embedded engineers a single reference for part selection.

USD $6,21 En stock

PIC32MX795F512HT-80V/PT

PIC32MX795F512HT-80V/PT - 80MHz 32-bit MCU, 512KB Flash | Microchip

The Microchip Technology PIC32MX795F512HT-80V/PT is a 32-bit MIPS M4K microcontroller running at 80 MHz with 512 KB of Flash and 128 KB of SRAM, housed in a 64-pin TQFP (PT) package. The 'T' suffix indicates tape-and-reel packaging and the 'V' suffix indicates the -40C to +105C extended industrial temperature grade, while the '80V' marking identifies the 80 MHz core speed and 2.3V to 3.6V operating voltage window. This part is the connectivity-rich flagship of the PIC32MX5/6/7 family, integrating USB 2.0 On-The-Go with PHY, 10/100 Ethernet MAC with MII/RMII, two CAN 2.0b controllers, and eight dedicated DMA channels for USB, Ethernet, and CAN peripherals. A 32-bit microcontroller (MCU) is a microprocessor core with on-chip Flash program memory, SRAM data memory, and integrated peripherals such as timers, ADCs, communication controllers, and I/O. PIC32MX MCUs use the MIPS32 M4K Harvard architecture with a 5-stage pipeline, delivering up to 105 DMIPS at 80 MHz. Compared to 8-bit or 16-bit MCUs, a 32-bit core gives substantially more headroom for protocol stacks (TCP/IP, USB, CANopen) and DSP-style math, while remaining simple enough to program in bare-metal or RTOS environments with Microchip's MPLAB Harmony framework. Key features include 512 KB Flash (512K x 8) plus 12 KB auxiliary boot Flash, 128 KB SRAM, 16-channel 10-bit 1 Msps ADC, 51 user I/O pins, five 16-bit timers/counters, two I2C, two SPI, two UART, an external memory bus (PMP/EBI), and parallel master port. The on-chip 80 MHz internal oscillator with PLL and Fail-Safe Clock Monitor supports low-power Sleep, Idle, and Deep Sleep modes while keeping peripherals operating. Typical applications include industrial Ethernet gateways, CAN-to-Ethernet bridges, USB-OTG peripherals (HID, CDC, MSD, audio), embedded web servers, and automotive infotainment nodes. The combination of integrated USB PHY and Ethernet MAC eliminates external transceiver chips on cost-sensitive designs, reducing BOM count and PCB area. When designing with this part, take care to supply 3.3V regulated rails because the core tolerates only 2.3 V to 3.6 V. Provide 100 nF decoupling on each VDD pin and a 10 uF bulk cap on AVDD. The 'H' before -80V/PT denotes the high-pin-count variant (64 pins); pin-compatible 100-pin PF variants exist if you later need more I/O.

USD $7,10 En stock

PIC32MX795F512L-80I/BG

PIC32MX795F512L-80I/BG - 80MHz MIPS MCU 512KB Flash | Microchip

The Microchip Technology PIC32MX795F512L-80I/BG is a high-performance 32-bit MIPS M4K microcontroller running at 80 MHz with 1.56 DMIPS/MHz, integrating 512 KB of Flash program memory and 128 KB of SRAM, housed in a 121-pin TFBGA (10x10 mm) package. It is part of the PIC32MX5/6/7 family and delivers up to 1.56 DMIPS/MHz of processing performance while consuming modest power, making it suitable for connected embedded applications. A 32-bit microcontroller (MCU) is an integrated circuit containing a processor core, program memory (Flash), data memory (RAM), and a rich set of programmable peripherals including timers, communication interfaces, and analog blocks. The PIC32MX5/6/7 family sits within Microchip's broader PIC32 product line, which falls under the MIPS-based MCU architecture and ultimately into the embedded microcontroller category of semiconductors used for system control and connectivity. Key features of the PIC32MX795F512L-80I/BG include 16-channel 10-bit ADC, six UART modules, two CAN controllers, an integrated 10/100 Mbit Ethernet MAC, USB OTG/Host/Device, five I2C and four SPI peripherals, eight DMA channels, five 16-bit timers/capture/compare, and 85 general-purpose I/O pins. The supply voltage range is 2.3 V to 3.6 V (typical 2.5 V / 3.3 V operation), and the operating temperature spans -40°C to +85°C for the industrial "I" grade variant. Architecturally, the PIC32MX795F512L-80I/BG combines a 32-bit MIPS M4K core with separate Flash and SRAM buses, a Prefetch Cache Controller for accelerated Flash execution, and a peripheral bus that connects communication, analog, and timer blocks. Compared with earlier PIC24/dsPIC devices, the PIC32 provides higher performance, deterministic interrupt latency, and rich connectivity peripherals — all critical for networked and USB-attached designs. Typical applications include industrial Ethernet gateways, USB peripheral controllers, CAN-based automotive body and industrial nodes, embedded web servers, and connected consumer devices. The integrated Ethernet MAC combined with USB OTG and CAN makes it especially compelling for industrial automation, building automation, and IoT edge nodes. When designing with this MCU, allocate sufficient decoupling (0.1 µF + bulk caps) near each VDD/VSS pair and follow Microchip's recommended PCB layout guidelines for TFBGA packages — including via-in-pad or dog-bone fan-outs — to maintain signal integrity for high-speed Ethernet and USB signals. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with an at-a-glance engineering summary for sourcing and second-sourcing decisions.

USD $9,10 En stock

PIC32MX795F512L-80I/PF

PIC32MX795F512L-80I/PF - 80MHz 32-bit MCU, USB, CAN, Ethernet | Microchip

The Microchip Technology PIC32MX795F512L-80I/PF is a 32-bit MIPS M4K microcontroller running at 80 MHz (105 DMIPS), integrating 512 KB of Flash and 128 KB of SRAM in a 100-pin TQFP (14x14) package. It combines a 10/100 Mbit Ethernet MAC, USB 2.0 On-The-Go, two CAN 2.0b controllers, eight DMA channels, and up to 51 general-purpose I/O pins, targeting high-performance embedded connectivity applications. The device operates from 2.3 V to 3.6 V across the industrial -40C to +85C temperature range. A 32-bit microcontroller (MCU) is a single-chip processor that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals (timers, ADC, communication interfaces) on a single silicon die. The PIC32 family belongs to the broader category of embedded RISC microcontrollers, scaling from low-power 8-bit PIC MCUs up to high-performance MIPS-based parts like this one. They sit in the power-management and processing hierarchy alongside microprocessors, DSPs, and ASICs as a programmable, software-defined hardware platform. Key features include five 16-bit timers plus two 32-bit timers, dual 4-channel hardware compare/PWM units, an 8-channel 10-bit ADC capable of 1 Msps, two I2C, two SPI, and four UART interfaces. The integrated Ethernet MAC supports MII/RMII PHY interfaces, while the USB OTG controller supports Host, Device, and On-The-Go operation. The part also includes a parallel master port (PMP) for graphics and external memory interfacing. The device is supported by the MPLAB X IDE, MPLAB Harmony integrated software framework, and the XC32 compiler. JTAG and two-wire ICSP interfaces allow in-system programming and debugging. Code protection and a unique device ID aid in anti-cloning and traceability. Memory-mapped peripherals and a 32-bit wide Flash controller sustain high code-fetch throughput for the M4K core. Typical applications include industrial Ethernet gateways, automotive CAN/USB hubs, building automation controllers, graphic LCD HMI panels, USB device peripherals, and embedded web servers. Designers favor it when deterministic interrupt latency, real-time connectivity, and generous program memory are all required on a single chip. A key design consideration is power budgeting: at 80 MHz across 3.3 V with active peripherals, the part can consume significant current, so decoupling must use a 10 uF bulk plus 100 nF high-frequency caps near each power pin. Designers should also implement firmware-based Ethernet PHY configuration and follow Microchip TCP/IP stack examples in MPLAB Harmony. This page synthesizes distributor pricing, same-brand drop-in variants, and practical design notes not consolidated in the standalone manufacturer datasheet.

USD $9,95 En stock

PIC32MX795F512L-80I/PT

PIC32MX795F512L-80I/PT - 80MHz MIPS MCU 512KB Flash USB/Ethernet/CAN | Microchip

The Microchip Technology PIC32MX795F512L-80I/PT is a 32-bit MIPS32 M4K microcontroller operating at up to 80 MHz (105 DMIPS), integrating 512 KB of Flash program memory and 128 KB of SRAM, with on-chip USB 2.0 OTG (integrated PHY), 10/100 Ethernet MAC (MII/RMII), and dual CAN 2.0b controllers, in a 100-pin TQFP (PT) package with 85 GPIO pins and an industrial -40C to +85C operating range. A 32-bit microcontroller (MCU) is a programmable logic device that executes instructions from on-chip Flash memory, providing significantly higher throughput than 8-bit or 16-bit MCUs while integrating peripherals (timers, ADC, communication controllers) and memory on a single die. In the broader taxonomy, the PIC32MX family sits under Microchip's PIC32 (PIC) umbrella as a MIPS-based high-performance line aimed at embedded connectivity, bridging the gap between legacy PIC16/PIC24 devices and the higher-end PIC32MZ ARM-class portfolio. The '795' designator indicates the premium feature set: full USB OTG, Ethernet MAC, dual CAN, and maximum Flash/RAM density within the MX5/MX6/MX7 family. Key features include 8 dedicated DMA channels for peripheral offload, a 5-stage Harvard pipeline, 16-channel 10-bit ADC at 1 MSps, five 16-bit timers/counters, two comparators, two I2C, two SPI, and up to six UART interfaces. The integrated USB OTG PHY eliminates external PHY components, while the Ethernet MAC supports both MII and RMII for PHY flexibility. The 100-pin TQFP package has mature PCB layout libraries available from Microchip and third parties. Architecturally, the device uses a Harvard memory architecture with separate instruction and data buses, hardware multiply/divide, and a prefetch cache to sustain throughput. The 8-channel dedicated DMA engine enables zero-CPU-overhead data movement between peripherals and RAM, critical for high-bandwidth Ethernet and USB stacks. The peripheral bus matrix allows concurrent DMA-driven traffic on USB, Ethernet, and CAN while the core executes user tasks, supporting deterministic multi-protocol industrial buses. Typical applications include industrial Ethernet gateways, CAN-based automotive body controllers, USB-OTG device/host peripherals, embedded web servers, and PIC32 Bluetooth/USB bridging. The part is also a fit for PLC communication modules and Ethernet/IP nodes where deterministic connectivity matters. When designing with this part, ensure decoupling follows Microchip's 100-pin TQFP reference design (typically 100 nF + 10 uF bulk on each VDD rail), reserve an ICSP header for MPLAB ICD programming, and verify that the chosen Ethernet PHY's MII/RMII voltage matches the MCU's 3.3V I/O. This page synthesizes distributor pricing, drop-in alternatives drawn from the same PIC32MX7xx family (same 100-pin TQFP footprint), and practical design notes not found in the manufacturer datasheet, giving engineers a faster path to a working BOM.

USD $7,55 En stock

Productos (18688)