Microcontroladores

Productos (18688)

PIC32MZ1024EFE124-E/TL - 180MHz 1MB Flash 32-bit MCU | Microchip
PIC32MZ1024EFE124-E/TL

PIC32MZ1024EFE124-E/TL - 180MHz 1MB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MZ1024EFE124-E/TL is a high-performance 32-bit MIPS32 M-Class microcontroller featuring 1MB of FLASH program memory, 256KB of SRAM, and a maximum CPU speed of 180MHz, housed in a 124-pin VTLA (9x9 mm) surface-mount package. Designed around the MIPS Warrior M-class core with a hardware Floating Point Unit (FPU) and DSP-enhanced instruction set, it delivers up to 330 DMIPS of computational throughput while supporting IEEE 754 single- and double-precision floating-point operations in a single cycle. A 32-bit microcontroller (MCU) is a microprocessor integrated with on-chip memory, peripherals, and I/O that executes instructions over a 32-bit data path. The PIC32MZ EF family specifically targets high-end connectivity, graphics, and motor-control applications by combining ample SRAM for protocol stacks, dual-panel Flash for live firmware updates, and a rich peripheral set including Hi-Speed USB, Ethernet, CAN-FD, and multiple SPI/I2C interfaces. This places the family in the broader taxonomy: microcontroller -> embedded processor -> semiconductor device. Key features of the PIC32MZ1024EFE124-E/TL include four 64-bit accumulators for DSP operations, single-cycle MAC with saturating and fractional math, a 12-bit ADC module with up to 5 MSPS sampling rate, six UART modules, four SPI ports, four I2C ports, and a 97-pin general-purpose I/O count supporting change-notification on every pin. The integrated FPU eliminates software-emulated float math, reducing latency for control-loop and signal-processing code paths. The architecture combines a 200 MHz-capable MIPS Warrior core (binned to 180 MHz in this -E extended-temperature variant) with tightly-coupled SRAM and dual-panel Flash, enabling Live Update firmware swaps without CPU stall. Six DMA channels and a high-bandwidth peripheral bus allow data streaming between ADC, communication peripherals, and memory with minimal CPU intervention, which is essential for real-time industrial and automotive subsystems. Typical applications include industrial automation controllers, automotive body and infotainment ECUs, IoT edge gateways, HMI/graphics terminals, and motor-control drives. The AEC-Q100 qualification and -40C to +125C operating range make it suitable for harsh-environment deployments where reliability under thermal stress is mandatory. When designing with this MCU, allocate decoupling capacitors close to each VDD/VSS pair and route the 124-pin VTLA land pattern on a 0.5 mm pitch footprint. The exposed thermal pad must be soldered to a continuous ground plane to meet the datasheet's thermal resistance specification. Use MPLAB Harmony v3 for peripheral configuration and to leverage the DSP library and FPU-optimized math routines. This page synthesizes distributor pricing, parametric drop-in alternatives from the same PIC32MZ EF family, and practical PCB/thermal design notes that complement the manufacturer datasheet.

USD $8,91 En stock
PIC32MZ1024EFE124-I/TL - 200MHz 32-bit MCU, 1MB Flash, 124-VTLA | Microchip
PIC32MZ1024EFE124-I/TL

PIC32MZ1024EFE124-I/TL - 200MHz 32-bit MCU, 1MB Flash, 124-VTLA | Microchip

The Microchip PIC32MZ1024EFE124-I/TL is a 32-bit MIPS32 M-Class microcontroller running at 200MHz, integrating 1MB of Flash and 256KB of SRAM in a 124-pin VTLA (9x9 mm) surface-mount package with industrial -40C to +85C temperature rating. The PIC32MZ EF family combines a MIPS Warrior M-class core with a hardware Floating Point Unit (FPU), DSP-enhanced datapath featuring four 64-bit accumulators and single-cycle MAC, plus IEEE 754-compliant single/double precision floating point for graphics and signal-processing workloads. What is a 32-bit MCU? A 32-bit microcontroller is a single-chip computer whose central processing unit manipulates data in 32-bit words, giving it substantially more addressable memory, higher arithmetic throughput, and richer peripheral integration than an 8-bit or 16-bit MCU. The PIC32MZ EF family sits in the upper-mid tier of 32-bit MCUs, bridging the gap between traditional microcontrollers and application processors, and is positioned by Microchip for connectivity, graphics (HMI), industrial automation, IoT, and motor-control applications. Key features of the PIC32MZ1024EFE124 include dual-panel Flash that supports live firmware updates without downtime, hardware crypto acceleration in select variants (the 'E' sub-family omits the crypto engine), High-Speed USB 2.0 with PHY, 10/100 Ethernet MAC, Quad-SPI (SQI) interface for external serial Flash, 12-bit ADC up to 5 MSPS, and multiple UART/SPI/I2C ports for sensor and display integration. The 200MHz core delivers up to 330 DMIPS, enabling responsive HMI rendering and DSP-class audio processing. Technically, the architecture uses a 5-stage pipeline, separate instruction and data caches, and a tightly-coupled SRAM block for deterministic interrupt response. The 124-pin VTLA package exposes four GPIO ports (up to 98 GPIOs), multiple timer/counter modules, parallel master port (PMP), and EBI for external memory expansion. Power management includes multiple low-power sleep modes, a deep-sleep current in the microamp range, and a wide 2.3V-3.6V VDD range. Typical applications include industrial HMI touch panels, Ethernet-connected IoT gateways, USB host/device peripherals, graphical motor-control drives, and audio DSP front-ends. The EF variant suits designs that need floating-point performance but do not require on-chip cryptographic engines, reducing BOM cost versus the EC/ECH sub-families. When designing with this MCU, ensure that decoupling capacitors are placed as close as possible to all VDD/VSS pairs, the VTLA exposed pad is soldered to a continuous ground plane for thermal dissipation, and the trace lengths to the 50 MHz external crystal/oscillator are kept short and guarded to maintain signal integrity at high switching speeds. This page synthesizes distributor pricing, parametric drop-in alternatives from the same PIC32MZ EF family, and practical PCB-layout notes not found in the manufacturer datasheet alone.

USD $9,40 En stock
PIC32MZ1024EFE124T-I/TL - 200MHz 32-bit MCU 1MB Flash 256KB RAM | Microchip
PIC32MZ1024EFE124T-I/TL

PIC32MZ1024EFE124T-I/TL - 200MHz 32-bit MCU 1MB Flash 256KB RAM | Microchip

The Microchip Technology PIC32MZ1024EFE124T-I/TL is a high-performance 32-bit MIPS32 M-Class PIC microcontroller running at 200 MHz with 1 MB Flash and 256 KB SRAM, housed in a 124-pin VTLA (9x9 mm) package. It is part of the PIC32MZ EF Family and is positioned for connectivity, industrial, IoT, graphics (HMI), and motor-control applications. This device belongs to the broader category of 32-bit microcontrollers (MCUs) - specifically the MIPS32 M-Class family, a class of RISC microcontrollers engineered for high-throughput embedded workloads. Within the taxonomy: 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. Compared with Cortex-M parts, PIC32MZ EF devices use a Harvard-architecture MIPS core with a 5-stage pipeline and DSP extensions, giving deterministic interrupt latency and a mature MPLAB Harmony ecosystem. Key specifications include a 200 MHz CPU clock, 1 MB on-chip Flash with live-update partitioning, 256 KB SRAM, hardware FPU, 97 programmable I/O lines, and rich connectivity through USB-HS, Ethernet (MII/RMII), SQI (Serial Quad Interface), up to 5 I2C, 3 SCI/UART, and SPI. The integrated 200 MHz 12-bit ADC and analog comparators support mixed-signal designs without external converters. Hardware crypto acceleration is omitted on the E variant; CAN is also not present on this part. Architecturally, the PIC32MZ EF combines a MIPS32 microAptiv core with tightly-coupled FPU, a multi-channel DMA engine, and a peripheral bus that allows concurrent ADC, SQI, and Ethernet transfers without CPU stall. The 124-pin VTLA package exposes the full connectivity peripheral set, while the 9x9 mm outline preserves board area for compact IoT gateways. Typical applications include industrial HMI with TFT displays, IoT edge gateways with Ethernet and USB, motor-control FOC drives, audio processing with external CODEC, and medical instrumentation with mixed-signal front-ends. The wide peripheral mix supports bridging between legacy SPI/I2C sensors and Ethernet/USB hosts. When designing with this MCU, allocate decoupling per VDD/VSS pair, follow Microchip's VTLA land-pattern recommendations, and use the MPLAB Harmony Configurator (MHC) to map peripherals. Verify trace routing for USB 90-ohm differential and Ethernet MII signals before final layout.

USD $9,04 En stock
PIC32MZ1024EFE144-E/JWX - 32-bit 180MHz MCU, 1MB Flash | Microchip
PIC32MZ1024EFE144-E/JWX

PIC32MZ1024EFE144-E/JWX - 32-bit 180MHz MCU, 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFE144-E/JWX is a 32-bit MIPS32 M-Class PIC32MZ microcontroller running up to 180 MHz with 1 MB of Flash and 256 KB of SRAM, housed in a 144-lead TFBGA (7x7 mm) package. It belongs to the PIC32MZ EF Family, which delivers high-performance connectivity and DSP capability for industrial, automotive, IoT, graphics/HMI, and motor-control applications. A 32-bit microcontroller (MCU) is an integrated processor core, SRAM, Flash program memory, and a configurable peripheral set on a single silicon die. The PIC32MZ EF family sits in the high-performance tier of Microchip's MIPS32-based MCU portfolio and inherits the company-wide Harmony software framework. Compared with 8-bit or 16-bit MCUs, a 32-bit core provides higher code density, deterministic interrupt latency, hardware single-cycle MAC for DSP, and the throughput required to drive graphics HMI stacks or encrypted communication stacks. The EF sub-family is the no-CAN / no-Crypto derivative of PIC32MZ, trading those peripherals for lower cost while retaining the FPU, Hi-Speed USB, Ethernet MAC, and 200 MHz-class core. Key features include a MIPS32 microAptiv core with FPU and DSP extensions, 1 MB dual-bank Live-Update Flash, 256 KB SRAM, Hi-Speed USB 2.0 PHY, 10/100 Ethernet MAC with IEEE 1588, up to 144 I/O pins, multiple UART/SPI/I2C peripherals, a 12-bit ADC up to 500 ksps, and an integrated crypto-less / CAN-less peripheral set. The 144-TFBGA package supports industrial-grade -40 °C to +125 °C operation, making the part suitable for harsh-environment industrial and automotive subsystems. The architecture combines a 5-stage pipeline, hardware multiply/divide, MMU for full RTOS support (ThreadX, FreeRTOS, OPENRTOS), and dual Flash banks that allow field firmware upgrades without downtime. The integrated FPU accelerates floating-point DSP workloads such as sensor fusion, while the dedicated Hi-Speed USB and Ethernet controllers offload communication processing from the core. Typical applications include industrial Human-Machine Interface (HMI) touch panels, IoT gateways with Ethernet and USB connectivity, graphics-driven appliances, motor-control BLDC/PMSM drives, and connected medical/measurement instruments. The 200 MHz MIPS32 core plus DSP extensions make the part suitable for real-time control loops and signal-processing tasks at the same node. When designing with this device, ensure that the 144-TFBGA land pattern matches your PCB process capability (TFBGA typically requires 0.8 mm pitch capability and via-in-pad design rules). Decoupling follows the family reference manual guidance: at least one 0.1 µF ceramic per supply rail plus a 4.7 µF bulk capacitor. The Live-Update dual-bank Flash allows boot-loader-driven firmware updates, but the application must reserve two regions of Flash explicitly. This page synthesizes distributor stock, parametric context, drop-in alternative analysis, and practical design considerations not collected in any single manufacturer datasheet. Sourced from Microchip's PIC32MZ EF datasheet, DigiKey, Mouser, and Octopart distributor data as of 2026-10-04.

USD $13,40 En stock
PIC32MZ1024EFE144-E/PH - 32-bit 252MHz MCU 1MB Flash LQFP-144 | Microchip
PIC32MZ1024EFE144-E/PH

PIC32MZ1024EFE144-E/PH - 32-bit 252MHz MCU 1MB Flash LQFP-144 | Microchip

The Microchip PIC32MZ1024EFE144-E/PH is a high-performance 32-bit MIPS MCU from the PIC32MZ EF family, operating at up to 252 MHz with 1 MB Flash and 256 KB SRAM in a 144-pin TQFP package (16x16 mm). It integrates a Floating Point Unit (FPU), HS USB, Ethernet MAC, multiple UART/SPI/I2C interfaces, and a 12-bit ADC targeting connectivity, industrial, and HMI applications. A 32-bit microcontroller (MCU) is an integrated circuit that combines a high-performance 32-bit CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals (communication interfaces, timers, ADCs) on a single silicon die. The PIC32MZ EF family sits within the PIC32 family -> 32-bit MCU -> microcontroller -> embedded processor hierarchy, and is engineered for applications where deterministic real-time performance and on-chip connectivity are required. Key features of the PIC32MZ1024EFE144 include 252 MHz core speed with hardware FPU, 1 MB Live-Update Flash, 256 KB SRAM, 144 KB boot Flash, and a Crypto engine absent on the 'E' variant. The device integrates Hi-Speed USB 2.0, 10/100 Ethernet MAC with MII/RMII interfaces, CAN 2.0B, six UART, four SPI, five I2C, a 12-bit 5 MSPS ADC with up to 48 channels, and a graphics-friendly PMP/EBI interface for external displays or memory. The architecture uses a 5-stage MIPS32 M-Class pipeline with a tightly-coupled FPU, branch predictor, and dual-panel Flash for Live-Update firmware field upgrades. Prefetch buffer and 16 KB I-cache reduce wait-states at 252 MHz, achieving 3.28 CoreMark/MHz efficiency. The device supports an industrial-grade operating range and integrates a 32 kHz RTCC, dedicated crypto accelerators in 'F/M/H' variants, and JTAG/ICSP for debug. Typical applications include industrial HMI with TFT-LCD graphics, factory automation controllers, IoT gateways with Ethernet/USB, motor control with FOC algorithms, automotive infotainment clusters, and medical instrumentation. Designers select the PIC32MZ EF family when they need deterministic 32-bit performance, abundant RAM for protocol stacks (TCP/IP, USB, CAN), and Microchip's MPLAB Harmony ecosystem for rapid development. When designing with this device, pay attention to the 144-pin TQFP land pattern and ensure adequate decoupling (100 nF + 4.7 µF per VDD/VSS pair) on all power pins. The internal voltage regulator requires an external 10 µF bulk capacitor on the VCAP pin. Use MPLAB XC32 compiler with -O2 optimization to fully exploit the FPU; the Live-Update dual-panel Flash eliminates firmware-update downtime in deployed systems. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC32MZ EF family, application-specific companion parts, and PCB layout guidance not found in a single manufacturer datasheet - giving engineers a single reference for both procurement and design.

USD $11,05 En stock
PIC32MZ1024EFE144-E/PL - 180MHz 32-bit MCU 1MB Flash | Microchip
PIC32MZ1024EFE144-E/PL

PIC32MZ1024EFE144-E/PL - 180MHz 32-bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFE144-E/PL is a 32-bit MIPS32 M-Class PIC32MZ microcontroller running up to 180 MHz (with the family capable of 252 MHz), integrating 1 MB of Flash and 256 KB of SRAM in a 144-pin LQFP (20x20 mm) package. The device belongs to the PIC32MZ EF (Embedded Connectivity with Floating Point Unit) family, with the E designation indicating a specific flash/SRAM density and the absence of hardware cryptography (no crypto engine). The -E/PL suffix denotes the -40C to +125C extended temperature grade in an LQFP package. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich peripheral set. PIC32MZ EF parts are positioned at the high end of Microchip's 32-bit MCU portfolio and target industrial, automotive, IoT, and graphical HMI designs that need an integrated floating-point unit (FPU) for DSP-style math without an external math processor. Key features include the MIPS32 microAptiv core with hardware multiply/divide and FPU, 1 MB dual-bank Flash supporting live update, 256 KB SRAM, a 12-bit 18-channel ADC (up to 500 ksps), four comparators, multiple SPI/I2S/UART interfaces, two CAN modules, USB 2.0 High-Speed OTG, 10/100 Ethernet MAC, an SQI (Serial Quad Interface) for external memory, and an 8-bit/16-bit PMP/EMIF parallel interface. The 144-pin LQFP provides 120+ general-purpose I/Os, ample for color TFT displays and motor-control PWMs. Architecturally, the part pairs a high-speed pipelined core with an extensive DMA controller and dedicated peripherals that offload the CPU. The dual-bank Flash and ECC-protected SRAM make it suitable for systems requiring firmware updates in the field without halting operation. Typical applications include industrial IoT gateways, Ethernet-connected motor drives, automotive instrument clusters, graphical HMI panels with resistive touch, USB host/device products, and audio processing systems that benefit from the integrated I2S and DSP instructions. When designing with this MCU, allocate sufficient decoupling (100 nF per VDD/VBAT pin) and provide a clean 3.3 V rail; the integrated Ethernet PHY interface requires a 50 MHz reference or external 25 MHz crystal depending on the board reference design. Use MPLAB Harmony to take advantage of the framework's driver library. This page synthesizes distributor pricing, drop-in alternatives, application examples, and design notes not collected in the manufacturer datasheet alone, helping engineers quickly evaluate the PIC32MZ1024EFE144-E/PL for new designs.

USD $10,10 En stock
PIC32MZ1024EFE144-I/JWX - 32-bit MCU, 1MB Flash, 252MHz | Microchip
PIC32MZ1024EFE144-I/JWX

PIC32MZ1024EFE144-I/JWX - 32-bit MCU, 1MB Flash, 252MHz | Microchip

The Microchip PIC32MZ1024EFE144-I/JWX is a high-performance 32-bit MIPS MCU from the PIC32MZ EF family, offering up to 252 MHz core clock, 1 MB of Flash, and 256 KB SRAM in a 144-pin TFBGA (JWX) package. It integrates FPU, HS USB OTG, Ethernet MAC, 12-bit ADC, and graphics/audio interfaces targeting connectivity and HMI applications. A 32-bit microcontroller (MCU) is a programmable computing IC that integrates a CPU core, memory, peripherals, and I/O into a single silicon die, forming the heart of an embedded system. PIC32MZ EF family devices sit at the high-performance end of the Microchip PIC32 line, bridging the gap between traditional 8/16-bit MCUs and application processors. They employ the MIPS32 M-Class core with hardware floating-point (FPU), live-update dual-partition Flash for over-the-air firmware upgrades, and rich connectivity (Ethernet, USB, CAN, SQI). The hierarchy is: 32-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. Key features include 1 MB of Flash with live-update capability, 256 KB of SRAM, hardware FPU (IEEE 754 single/double precision), integrated 10/100 Ethernet MAC with MII/RMII, USB 2.0 High-Speed OTG controller, parallel master port for graphics, up to 53 I/O pins, 32-channel 12-bit ADC, four I2C, six UART, three SPI ports, two CAN modules, real-time clock, and a 4-channel SQI (Serial Quad Interface) for off-chip Flash/PSRAM expansion. The TFBGA-144 package is the platform option. The MCU uses a 5-stage pipeline MIPS32 M-Class core capable of 252 MHz / 415 DMIPS operation, achieving 1.65 DMIPS/MHz with the hardware multiply/divide unit. The 12-bit ADC delivers up to 1 MSPS with multiple internal references, and the integrated Ethernet and USB PHYs reduce BOM cost. Hardware cryptographic acceleration (AES, SHA, MD5) is supported on the EF family variants that include Crypto engines, suitable for secure connectivity applications. Typical applications include industrial IoT gateways with Ethernet and CAN, automotive infotainment and cluster displays, motor control with FOC algorithms, smart energy metering with secure communications, and graphics/HMI touch panels. The Live-Update Flash enables robust OTA firmware upgrades with zero downtime, critical for connected products. When designing, ensure the 144-pin TFBGA package requires PCB design expertise (0.5 mm pitch, microvia stack-ups recommended). Use the Microchip Harmony framework for peripheral drivers and RTOS support, and provide adequate decoupling (10 uF bulk plus 100 nF per supply pin) for the mixed 3.3 V/1.2 V supply rails. This page synthesizes distributor pricing, drop-in pin-compatible alternatives (same TFBGA-144 footprint), application examples with companion MPNs, and practical design notes not collected in a single place in the manufacturer datasheet.

USD $8,05 En stock
PIC32MZ1024EFE144-I/PH - 200MHz 32-bit MCU 1MB Flash | Microchip
PIC32MZ1024EFE144-I/PH

PIC32MZ1024EFE144-I/PH - 200MHz 32-bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFE144-I/PH is a high-performance MIPS32 M-Class 32-bit microcontroller running up to 200 MHz, integrating 1 MB of Flash and 256 KB of SRAM (with 512 KB available across the EF family) in a 144-pin TQFP (16x16 mm) package. It features a hardware Floating Point Unit (FPU), HS USB, Ethernet MAC, and Advanced Analog peripherals targeting connectivity, industrial, automotive, IoT, HMI graphics, and motor-control applications. A 32-bit MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program Flash, data SRAM, and a rich set of on-chip peripherals (ADC, timers, communication controllers, GPIO). The PIC32MZ EF family specifically targets the high-end of the MIPS-based 32-bit MCU market, placing it hierarchically under PIC32 -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. The M-Class core delivers 252 MHz peak operation with deterministic interrupt latency, while the EF family extensions add high-bandwidth peripherals such as HS USB 2.0 and 10/100 Ethernet for connected embedded systems. Key differentiating specifications include 200 MHz CPU core (252 MHz on the EF family maximum), 1 MB Live-Update Flash, 256 KB SRAM, integrated FPU for single-precision floating point, hardware crypto accelerators on sister parts (no crypto on the -EFE variant), up to 120 GPIO, four I2C, six UART, and four SPI ports. The 144-pin TQFP exposes the full peripheral set including 18-bit ADC, graphics LCD controller, and audio I2S/SSI interfaces. An integrated Hi-Speed USB 2.0 PHY and 10/100 Ethernet MAC reduce external BOM cost in connected designs. Architecture depth: the PIC32MZ EF family uses a dual-bank Flash subsystem that supports Live-Update firmware field upgrades without downtime, plus a dedicated DMA engine that offloads memory moves from the CPU. The instruction cache and prefetch buffer keep the 200 MHz core fed efficiently from the large 1 MB Flash array, while 256 KB SRAM supports sizeable protocol stacks and graphics frame buffers for HMI applications. Typical applications include industrial Ethernet gateways, IoT edge nodes with TLS-secure connectivity, automotive HMI panels, BLDC motor-control FOC drives, audio playback products, and TFT-driven graphical control panels. The 16x16 mm TQFP footprint is well suited to industrial temperature (-40C to +85C) operation with generous PCB thermal margin. When designing with this part, ensure the firmware image size does not exceed 1 MB and reserve adequate SRAM for the protocol stack and frame buffers. Always consult the device errata document for the latest silicon revision notes before committing to production. This page synthesizes distributor pricing, drop-in alternatives from the same PIC32MZ EF family, and practical design notes that complement the manufacturer datasheet.

USD $12,10 En stock
PIC32MZ1024EFE144-I/PL - 32-Bit 200MHz MCU, 1MB Flash | Microchip
PIC32MZ1024EFE144-I/PL

PIC32MZ1024EFE144-I/PL - 32-Bit 200MHz MCU, 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFE144-I/PL is a high-performance 32-bit microcontroller from the PIC32MZ EF family, featuring a MIPS32 M-Class core running up to 200 MHz with a hardware Floating Point Unit (FPU). It integrates 1 MB of Flash program memory and 256 KB of SRAM in a 144-pin LQFP (20x20 mm) package, targeting connectivity-rich applications across industrial, IoT, graphics HMI, and motor control segments. The device operates from a 2.3V to 3.6V supply and is rated for the industrial -40C to +85C temperature range. A microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory, data memory, and programmable peripherals. The PIC32MZ EF family sits at the high end of Microchip's 32-bit MCU portfolio, positioned between mainstream Cortex-M4 devices and higher-end Cortex-M7 parts. Within the PIC32 ecosystem, it belongs to the PIC32MZ series (32-bit MIPS architecture), the EF sub-family (Embedded Connectivity with Floating Point Unit), and the 1024 variant tier (1 MB Flash / 256 KB SRAM). It is built on a 5-stage pipelined MIPS32 M-Class core with DSP extensions and a single-precision FPU, enabling efficient floating-point math for sensor fusion and audio processing. Key features include Hi-Speed USB 2.0 (Host/Device/OTG), 10/100 Mbps Ethernet MAC with MII/RMII interfaces, up to six UART, four SPI, and five I2C peripherals, plus a 12-bit 18 Msps ADC with up to 48 analog inputs, and a hardware crypto accelerator absent in the E (no crypto) variant. The 144-LQFP exposes 120 general-purpose I/O pins. The device includes a graphics-friendly Parallel Master Port (PMP) and I2S audio interfaces for HMI and audio applications. Typical applications include industrial Ethernet gateways, building automation controllers, IoT edge nodes with TLS-friendly peripherals, graphic TFT HMI panels, audio processing front-ends, BLDC motor control with field-oriented control, and medical instrumentation. The high peripheral count and large memory make it well suited as a single-chip host for connected sensor hubs. When designing with this part, ensure decoupling follows the Microchip reference layout with 100 nF + 1 uF near each VDD pin pair, and route the 50 MHz external crystal traces symmetrically to minimize duty-cycle distortion. The MPLAB Harmony v3 framework provides pre-validated peripheral drivers; configure FreeRTOS or Harmony OSAL for multi-threaded stacks. For pin-compatibility within the family, the PIC32MZ1024EFE144 family shares 144-LQFP pinout across E, EC, EF, and EH crypto variants, simplifying BOM flexibility.

USD $8,95 En stock
PIC32MZ1024EFE144T-E/JWX - 180MHz 1MB Flash 32-bit MCU | Microchip
PIC32MZ1024EFE144T-E/JWX

PIC32MZ1024EFE144T-E/JWX - 180MHz 1MB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MZ1024EFE144T-E/JWX is a high-performance 32-bit MIPS32 M-Class microcontroller running up to 180 MHz with 1 MB of Flash program memory and 256 KB of SRAM, housed in a 144-pin TFBGA (7x7 mm) package. It operates from a 2.1 V to 3.6 V supply across the industrial -40C to +125C temperature range, with AEC-Q100 automotive qualification. The "T" suffix denotes tape-and-reel packaging and the "-E" temperature grade marks the extended -40C to +125C industrial/automotive range. A 32-bit microcontroller (MCU) is a single-chip computer whose central processing unit manipulates data in 32-bit-wide registers and addresses memory linearly across gigabytes of address space. Within the taxonomy 32-bit MCU -> microcontroller -> embedded processor -> semiconductor IC, the PIC32MZ EF family sits at the high-performance end of Microchip's PIC32 lineup, integrating a MIPS microAptiv core with rich connectivity peripherals for connected-embedded designs. Key differentiating features of this variant include 1 MB Flash, 256 KB SRAM, no on-chip crypto accelerator, and no CAN module, distinguishing it from sibling PIC32MZ EF devices that add CryptoAuthentication and CAN peripherals. The part exposes up to 120 I/O lines, a 12-bit ADC with up to 48 channels, 9 timers, 2 watchdog timers, 8 DMA channels, and a wide peripheral mix including 6 UART, 5 I2C, 4 SPI, and USB. The PIC32MZ EF family's microAptiv core delivers 252 DMIPS, suiting deterministic real-time control with low interrupt latency. Typical applications include industrial automation, automotive body and infotainment subsystems, IoT edge nodes, HMI graphics controllers, and motor-control drives. The 1 MB Flash supports over-the-air (OTA) firmware update partitioning typical of connected devices. Design with this MCU, ensure the PCB exposes the TFBGA-144 footprint with controlled-impedance traces for high-speed peripherals and that the on-chip FPU and prefetch module are configured in the startup code to meet the 180 MHz throughput target.

USD $9,55 En stock
PIC32MZ1024EFE144T-I/JWX - 200MHz 32-bit MCU, 1MB Flash, TFBGA-144
PIC32MZ1024EFE144T-I/JWX

PIC32MZ1024EFE144T-I/JWX - 200MHz 32-bit MCU, 1MB Flash, TFBGA-144

The Microchip Technology PIC32MZ1024EFE144T-I/JWX is a high-performance 32-bit MIPS32 M-Class microcontroller operating at up to 200 MHz, integrating 1 MB of Flash program memory and 256 KB of SRAM in a 144-pin TFBGA (7x7 mm) surface-mount package with industrial -40C to +85C temperature rating. Built on the PIC32MZ EF family architecture, this device delivers 252 MIPS of computational throughput, dedicated FPU for single/double-precision floating-point operations, and 12-bit 18 Msps ADC throughput with up to 120 analog input channels. A microcontroller (MCU) is a single-chip computer integrating a CPU core, program and data memory, peripheral set, and I/O. The 32-bit MCU category extends 8-bit and 16-bit predecessors with 32-bit registers and datapaths, enabling high-code-density C/C++ workloads. Within the power/performance hierarchy, PIC32MZ EF sits in the high-performance tier, paired with microcontrollers > 32-bit microcontrollers > microcontrollers > integrated circuits > semiconductors. Key features of this variant include 1 MB dual-bank Flash with live update support, 256 KB SRAM, a 12-bit 18 Msps ADC with up to 120 channels, six UART, four SPI, five I2C, two CAN 2.0b controllers, a 10/100 Ethernet MAC with RMII/MII interface, Hi-Speed USB 2.0 device/host/OTG, and integrated crypto engine variants across the EF family. The TFBGA-144 package offers a 7x7 mm footprint with 0.5 mm ball pitch, suiting space-constrained industrial and connectivity designs. Architecture-wise, the device uses a 5-stage MIPS M-Class pipeline with branch prediction and separate Instruction and Data TCM/SRAM paths. The 12-bit ADC provides 18 Msps conversion rate with up to 48 analog inputs (family max 120) and a dedicated 1 Msps 12-bit DAC. Peripherals are routed through eight DMA channels and nine 16/32-bit timers/capture inputs for low-latency deterministic control. The on-chip FPU accelerates DSP and signal-processing workloads in motor-control and audio front-ends. Typical applications include industrial automation controllers, IoT edge gateways with Ethernet/USB-CAN bridging, graphics HMI with integrated TFT/DRM LCD support, automotive body/comfort ECUs, BLDC/PMSM motor control inverters, and audio DSP processors. The combination of large memory, Ethernet, and USB-OTG makes it suitable for connected embedded products requiring protocol translation. When designing with this part, place at least 100 nF + 10 uF decoupling on each VDD/VDDIO pair and provide a 12 MHz high-precision crystal with proper load capacitors for the Ethernet PHY reference clock. The TFBGA package requires NSMD pads with 0.4 mm solder-mask openings and via-in-pad with epoxy fill for reliable BGA assembly. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical thermal/PCB design notes that go beyond the manufacturer datasheet to help engineers shorten their selection cycle.

USD $8,95 En stock
PIC32MZ1024EFF064-E/MR - 32-bit 180MHz MCU 1MB Flash | Microchip
PIC32MZ1024EFF064-E/MR

PIC32MZ1024EFF064-E/MR - 32-bit 180MHz MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFF064-E/MR is a 32-bit MIPS32 M-Class PIC32MZ microcontroller running up to 180MHz with 1MB of Flash and 256KB of SRAM, housed in a 64-pin QFN (9x9mm) package. It integrates a high-performance core with FPU and DSP extensions, a 200MHz 12-bit ADC with up to 48 channels, multiple CAN, USB, and Ethernet peripherals, plus a dedicated crypto accelerator and random number generator on the EF-family variants. A 32-bit microcontroller is an integrated circuit that combines a CPU, memory, and programmable peripherals on a single die. PIC32MZ devices sit at the top of the Microchip PIC32 family (PIC32MX -> PIC32MZ EF -> PIC32MZ EF with FPU/DSP -> dedicated connectivity variants), targeting embedded applications where deterministic real-time control, large code space, and rich connectivity must coexist on one chip. Key features include MIPS32 M-Class core with microMIPS and DSP instructions, hardware crypto accelerator (AES, 3DES, SHA, MD5, HMAC) and true RNG on the EF-family, 1MB Flash with live update dual-panel support, 256KB SRAM, up to 53 general-purpose I/O, and a 12-bit 200MHz 18MSPS ADC. Connectivity includes 10/100 Ethernet MAC, USB 2.0 high-speed PHY, two CAN 2.0b controllers, six UART, four SPI, and five I2C peripherals. The integrated FPU enables single-precision floating-point math for control loops and audio processing. The architecture pairs a 5-stage MIPS32 pipeline with a tightly-coupled SRAM subsystem and dedicated DMA, giving deterministic interrupt latency. The 64-QFN 9x9mm package provides a thermal pad and supports an industrial operating range. Combined with hardware crypto, multiple communication buses, and a fast ADC, the device addresses connected industrial, HMI graphics, and automotive-grade designs (the family is AEC-Q100 qualified at the family level, with this part carrying the -E extended temperature grade). Typical applications include industrial automation controllers, IoT edge gateways, HMI/graphics terminals, automotive body and infotainment ECUs, and motor control boards. The wide peripheral set also suits connected medical instrumentation and audio processing front-ends where floating-point math and low-noise ADC sampling are required. Designers should plan the PCB layout to use the exposed thermal pad as a low-impedance ground connection and to fan out all four GPIO ports. Select the -I industrial or -V automotive grade temperature suffix for harsher environments, and use MPLAB Harmony v3 for code generation to take advantage of the available middleware stacks. This page synthesizes distributor pricing, same-family drop-in alternatives from Microchip, and practical design notes not consolidated in the manufacturer datasheet.

USD $9,05 En stock
PIC32MZ1024EFF064-E/PT - 32-bit 180MHz MCU 1MB Flash | Microchip
PIC32MZ1024EFF064-E/PT

PIC32MZ1024EFF064-E/PT - 32-bit 180MHz MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFF064-E/PT is a 32-bit MIPS32 M-Class microcontroller operating at up to 180 MHz, delivering 252 MHz/330 DMIPS performance in a 64-pin TQFP (10x10 mm) package. The device integrates 1 MB of Flash program memory and 256 KB of SRAM alongside a floating-point unit (FPU), DSP extensions with four 64-bit accumulators, and IEEE 754-compliant single/double-precision math. Per the Microchip product page, the -E temperature grade targets -40C to +125C industrial operation, while the 'no crypto' (EFF) variant omits the on-chip crypto engine that distinguishes the EFH family. A 32-bit MCU is a microprocessor core, memory system, and peripheral set integrated on a single CMOS die. It belongs to the hierarchy microcontroller -> embedded processor -> semiconductor. The PIC32MZ family specifically implements the MIPS Warrior architecture with M-class enhancements, balancing deterministic interrupt latency with the throughput expected of DSP-class signal processing. For OEM architects choosing between PIC32, STM32, and NXP LPC families, PIC32MZ EF parts distinguish themselves through 200+ MHz core speed, large Flash/SRAM envelopes, and a peripheral mix tuned for connectivity (HS USB, Ethernet, CAN) and graphics/audio interfaces. Key features include 1 MB Flash, 256 KB SRAM, a 12-channel dedicated DMA controller, 160 KB boot Flash for live-update firmware, and a peripheral set comprising HS USB 2.0, 10/100 Ethernet MAC, multiple UART/SPI/I2C, SQI for external memory, and a 12-bit 5 MSPS ADC. The TQFP-64 package exposes up to 53 digital I/O pins. The DSP-enhanced core provides single-cycle MAC with saturating and fractional arithmetic, accelerating FIR/IIR filters and FFT kernels for motor control and audio DSP without external accelerators. The PIC32MZ EF family uses a 5-stage pipeline, hardware multiply-accumulate, and a tightly-coupled instruction cache. The 1 MB Flash is divided into dual-bank live-update regions, enabling firmware upgrades without downtime. The MIPS M-class core balances real-time deterministic interrupt response with the throughput needed for graphics HMI, audio streaming, and high-speed connectivity stacks. Designers selecting between PIC32MZ EF and PIC32MX benefit from EF's 2-3x MIPS advantage and substantially larger memory. Typical applications include industrial automation controllers, IoT gateways with Ethernet/USB connectivity, audio and graphics HMI panels, motor control FOC servo drives, automotive infotainment modules, and medical instrumentation. The device's 5 MSPS ADC and DSP extensions enable sensor-fusion and power-quality analysis for industrial IoT endpoints. When designing with this part, verify the core voltage rails (1.8V and 3.3V) are sequenced per datasheet requirements and that decoupling capacitors are placed within 5 mm of each VDD/VSS pair. For HS USB or Ethernet designs, the integrated PHY transceivers still need 90-ohm differential impedance on the PCB. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $9,30 En stock
PIC32MZ1024EFF064-I/MR - 200MHz 32-bit MCU 1MB Flash | Microchip
PIC32MZ1024EFF064-I/MR

PIC32MZ1024EFF064-I/MR - 200MHz 32-bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFF064-I/MR is a high-performance 32-bit MIPS M-Class microcontroller running up to 200 MHz with 1 MB Flash and 256 KB SRAM, housed in a 64-pin QFN (9x9 mm) package. As a member of the PIC32MZ EF family, the EFF064 variant integrates USB-HS, Ethernet, CAN, and SQI interfaces targeting connectivity-rich industrial, IoT, automotive, and graphics/HMI applications. The '-I' suffix denotes the industrial temperature range of -40C to +85C. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory (Flash), working memory (SRAM), and a rich set of peripherals on one silicon die. MCUs sit at the heart of embedded systems, executing firmware that reads sensors, drives actuators, and communicates over standard buses. The PIC32MZ EF family extends this concept with a MIPS32 microAptiv core that includes a single-precision FPU, MMU, and DSP extensions, enabling fixed-point and floating-point signal processing directly on the controller. This class of device belongs to the hierarchy: microcontroller -> 32-bit MCU -> high-performance connectivity MCU -> embedded processor. Key features include 200 MHz core speed with hardware FPU and DSP, 1 MB dual-bank Live-Update Flash for field-firmware upgrades, 256 KB SRAM, integrated 10/100 Ethernet MAC, USB 2.0 High-Speed OTG, two CAN 2.0B controllers, an SQI (Serial Quad Interface) for high-throughput external Flash/PSRAM, and 12-bit ADC modules. The 64-pin QFN package exposes multiple UART/SPI/I2C ports and a parallel master port, making the device a strong fit for gateway and HMI designs. The PIC32MZ EF architecture uses a 5-stage pipeline microAptiv core with branch prediction and a tightly coupled prefetch module that hides Flash latency, sustaining 3.28 CoreMark/MHz. The dual-panel Flash supports Live-Update firmware swapping without downtime, a capability rarely found on Cortex-M competitors. Typical applications include industrial IoT gateways with Ethernet and Wi-Fi co-processor links, automotive infotainment and CAN clusters, graphics HMI panels driving TFT LCDs, and motor-control boards combining CAN, SQI, and high-speed analog. Design consideration: plan SQI pin mapping early because SQI shares pins with the parallel master port and cannot coexist with that interface. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $6,65 En stock
PIC32MZ1024EFF064T-I/MR - 200MHz 32-bit MCU 1MB Flash 64-QFN
PIC32MZ1024EFF064T-I/MR

PIC32MZ1024EFF064T-I/MR - 200MHz 32-bit MCU 1MB Flash 64-QFN

The Microchip Technology PIC32MZ1024EFF064T-I/MR is a 32-bit MIPS32 M-Class PIC32MZ microcontroller IC running up to 200 MHz, featuring 1 MB of Flash program memory (1M x 8) and 256 KB of SRAM in a 64-pin QFN (9x9 mm) package with exposed pad. It is part of the PIC32MZ EF family, which targets high-performance connectivity applications including industrial, automotive, IoT, graphics (HMI), and motor control segments. The "T" suffix indicates tape-and-reel packaging while "/MR" denotes the 64-pin QFN. A 32-bit MCU (microcontroller unit) is a single-chip computer that integrates a 32-bit processor core, program memory (Flash), data memory (RAM), and a rich set of peripherals such as timers, communication controllers, and analog interfaces. The PIC32MZ EF family belongs to the higher-tier MIPS32 M-Class architecture (hypernym: microcontroller -> embedded MCU -> 32-bit MCU -> MIPS M-Class MCU), balancing deterministic real-time performance with the throughput required for graphics and connectivity stacks. Key features of the PIC32MZ1024EFF064T-I/MR include a hardware Floating Point Unit (FPU) for single-precision DSP math, a 12-bit ADC with up to 5 MSPS sampling, Hi-Speed USB 2.0 on-the-go, 10/100 Ethernet MAC, two CAN modules, an SQI (Serial Quad Interface) for external Flash, and audio/graphics peripherals. The integrated FPU and DSP extensions accelerate signal-processing tasks, while the 1 MB Flash supports large connectivity stacks such as TCP/IP, TLS, and graphics libraries. The device operates from a 2.1V to 3.6V supply, supports an industrial -40C to +85C temperature range (I-grade), and uses a 9x9 mm 64-QFN with exposed thermal pad for efficient heat dissipation. Internal PLLs and oscillator circuits simplify clocking, and the wide peripheral mix eliminates the need for external companion ICs in typical IoT gateways or HMI designs. Typical applications include industrial IoT gateways, HMI / graphics terminals, motor control, USB/Ethernet-connected embedded devices, and audio processing front ends. The 200 MHz core, 1 MB Flash, and 256 KB RAM make it well suited for running a real-time OS or a full connectivity stack. Designers should follow the Microchip PIC32MZ EF family reference manual for pin mapping and supply sequencing to ensure deterministic startup and reliable USB/Ethernet PHY operation. When designing the PCB, allocate adequate copper area beneath the exposed pad of the 64-QFN to meet thermal and electrical grounding requirements. Decoupling capacitors must be placed close to each power pin pair with a 0.1 uF ceramic in parallel with a bulk capacitor, following the reference schematic in the Microchip development kit. This page synthesizes distributor pricing, drop-in same-brand alternatives, and practical design considerations not found in the manufacturer datasheet alone.

USD $5,42 En stock
PIC32MZ1024EFF100-E/GJX - 200MHz 32-bit MCU, 1MB Flash, 100-TFBGA | Microchip
PIC32MZ1024EFF100-E/GJX

PIC32MZ1024EFF100-E/GJX - 200MHz 32-bit MCU, 1MB Flash, 100-TFBGA | Microchip

The Microchip PIC32MZ1024EFF100-E/GJX is a high-performance 32-bit MIPS MCU from the PIC32MZ EF family, featuring a 200 MHz MIPS32 M-Class core, 1 MB of Flash, 256 KB of SRAM, and a 100-pin TFBGA (7x7 mm) package. It integrates a Floating Point Unit (FPU), HS USB, Ethernet MAC, CAN, and advanced analog peripherals, targeting industrial, automotive, IoT, graphics HMI, and motor-control designs. The device operates across an extended -40C to +125C junction temperature range and supports 3.3V I/O with on-chip regulators. A 32-bit microcontroller is an integrated circuit that combines a high-performance processor core, program memory, data memory, and a rich set of on-chip peripherals onto a single die. The PIC32MZ EF family in particular sits within the hierarchy MCU -> 32-bit MCU -> MIPS-based MCU -> Microchip PIC32 family -> embedded connectivity MCU. The "EF" suffix denotes the Embedded Connectivity with Floating Point Unit sub-family, which adds DSP extensions (four 64-bit accumulators, single-cycle MAC, saturating/fractional math) and IEEE 754 single/double-precision floating-point hardware acceleration. Engineers choose 32-bit MCUs like this when 8-bit or 16-bit cores run out of headroom for Ethernet stacks, USB, or graphics rendering. Key features include 200 MHz / 330 DMIPS core performance, 1 MB Flash program memory, 256 KB SRAM, a 12-bit 18 MSPS ADC with up to 40 analog inputs, four comparators, two I2S/SPI audio interfaces, six UART, four SPI, five I2C, parallel master port (PMP) for graphics, and an integrated Ethernet MAC plus HS USB 2.0 OTG. The 100-TFBGA (7x7 mm) package saves board area compared to 100-pin TQFP while providing the full peripheral set of the PIC32MZ EF family. Architecturally, the PIC32MZ EF family uses a 5-stage MIPS Warrior M-class pipeline with DSP extensions, an instruction cache and prefetch module, and a tightly-coupled Flash/SRAM memory system that delivers sustained throughput at 200 MHz. A multi-vector interrupt controller and dedicated DMA channels keep peripheral I/O off the CPU's critical path, which is essential for Ethernet, USB, and audio streaming workloads. Typical applications include industrial Ethernet gateways, HMI/graphics touch panels, automotive infotainment and telematics nodes, USB audio interfaces, motor-control FOCs, IoT edge nodes, and medical patient monitors. For graphics HMI, the PMP bus interfaces directly to TFT LCD controllers; for USB audio, the I2S/USB combination enables class-compliant headphone or DAC designs. When designing with this device, allocate the 1 MB Flash partition for bootloader (typically 64 KB), application, and an OTA image; the 256 KB SRAM is enough to hold TCP/IP sockets plus audio buffers but plan for double-buffering in display applications. Use the on-chip FPU to offload DSP math from the main loop in motor-control or audio pipelines. This page synthesizes distributor pricing, parametric comparisons, and drop-in compatible alternatives drawn from Microchip's PIC32MZ EF family datasheets - data not consolidated on any single distributor page.

USD $7,75 En stock
PIC32MZ1024EFF100-E/PF - 180MHz 1MB Flash MCU | Microchip
PIC32MZ1024EFF100-E/PF

PIC32MZ1024EFF100-E/PF - 180MHz 1MB Flash MCU | Microchip

The Microchip Technology PIC32MZ1024EFF100-E/PF is a high-performance 32-bit MIPS MCU from the PIC32MZ EF family, featuring a 180 MHz core (200 MHz max on the -I grade), 1 MB of Flash and 256 KB of SRAM in a 100-pin TQFP (14x14 mm) package. What is a 32-bit MCU? A microcontroller (MCU) is a single-chip computer integrating a CPU core, memory (Flash for program code, SRAM for data), and peripherals (UART, SPI, I2C, ADC, timers, GPIO). 32-bit MCUs use a 32-bit data path and register width, allowing larger address spaces, higher throughput, and more efficient handling of complex algorithms than 8/16-bit parts. Within the taxonomy, the PIC32MZ EF belongs to: 32-bit MCU -> MIPS32 M-Class -> PIC32 family -> PIC32MZ sub-family -> PIC32MZ EF (Embedded Connectivity with FPU) line. These MCUs serve as the central intelligence in connected industrial, automotive, IoT, and human-machine interface (HMI) products. Key features of the PIC32MZ1024EFF100-E/PF include the MIPS32 M-Class core with hardware floating-point unit (FPU) for DSP-grade math, 1 MB Flash for code storage, 256 KB SRAM, integrated Ethernet MAC, USB 2.0 high-speed PHY, two CAN 2.0b controllers, six UART, four SPI, five I2C, I2S audio, a 12-bit 1.2 MSPS ADC with up to 48 channels, six PWM outputs, and a 32-bit real-time clock. The -E temperature grade supports -40C to +125C operation, suitable for industrial and automotive-grade environments. AEC-Q100 qualification is documented on the part per Hotenda listing. Typical applications include industrial Ethernet gateways and PLCs, IoT edge nodes with secure cloud connectivity, automotive body and infotainment ECUs, motor control (BLDC and PMSM FOC), and high-resolution graphical HMI displays with integrated LCD controllers. Extensive connectivity (Ethernet + USB + CAN + I2S) makes the part especially well-suited as a single-chip solution for connected embedded systems. Designers should note the 2.1 V to 3.6 V supply requirement, the 180 MHz max CPU speed for the -E grade (versus 200 MHz on -I grade), and the need for proper decoupling and trace impedance matching for the high-speed USB and Ethernet interfaces. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $8,95 En stock
PIC32MZ1024EFF100-E/PT - 32-bit 180MHz MCU, 1MB Flash TQFP-100
PIC32MZ1024EFF100-E/PT

PIC32MZ1024EFF100-E/PT - 32-bit 180MHz MCU, 1MB Flash TQFP-100

The Microchip Technology PIC32MZ1024EFF100-E/PT is a 32-bit MIPS32 M-Class PIC microcontroller IC operating at up to 180MHz with 1MB (1M x 8) Flash program memory, housed in a 100-pin TQFP (12x12mm) package. It is part of the PIC32MZ EF family, which targets connectivity applications in Industrial, automotive, IoT, Graphics/HMI, and Motor Control market segments, with up to 2MB Flash and 512KB SRAM available across the family. What is a PIC32 microcontroller? A PIC32 MCU is a 32-bit microcontroller from Microchip Technology based on the MIPS32 M-Class architecture (in the EF family) or, in newer variants, the Arm Cortex-M core. PIC32 microcontrollers belong to the broader category of 32-bit microcontrollers, which sit above 8-bit and 16-bit MCUs in compute, addressable memory, and peripheral integration. Within Microchip's portfolio, the PIC32 family bridges the gap between PIC16/PIC24 and the higher-end Arm-based SAM family, providing floating-point capability, large memory options, and high-speed connectivity peripherals. Key features of the PIC32MZ1024EFF100-E/PT include 1MB of Flash, 512KB of SRAM (family maximum), a 180MHz core clock (E grade variant), 78 I/O pins, HS USB, Ethernet MAC, advanced analog peripherals, and FPU support. The device runs from a 2.3V to 3.6V supply and is AEC-Q100 qualified for automotive applications. The integrated Floating Point Unit accelerates DSP and graphics workloads, while the 100-TQFP package balances pin count with through-hole-friendly or production-friendly SMT assembly. The PIC32MZ EF family architecture combines a 5-stage pipeline MIPS core with a rich peripheral set including multiple SPI, I2C, UART, CAN, and SQI interfaces. This makes the MCU suitable for complex connected systems where the CPU must service both high-bandwidth communication and real-time control loops simultaneously. The Live-Update Flash feature enables field firmware upgrades with fail-safe rollback. Typical applications include industrial Ethernet gateways, automotive infotainment and HMI panels, IoT edge nodes with USB and Ethernet connectivity, and graphical HMI controllers. Designers also use the PIC32MZ EF in motor control and audio processing subsystems where the FPU and DMA channels accelerate numeric workloads. When designing with this MCU, ensure the 12x12mm TQFP-100 PCB footprint includes adequate thermal copper for the 180MHz operating point, and use the MPLAB Harmony framework to accelerate peripheral driver development. The -E temperature grade (-40C to +125C) supports harsh industrial and automotive environments. This page synthesizes distributor pricing, same-brand and cross-brand drop-in alternatives from the PIC32MZ family, and practical design notes not found in the manufacturer datasheet alone.

USD $9,67 En stock
PIC32MZ1024EFF100-I/GJX - 200MHz 32-bit MCU 1MB Flash | Microchip
PIC32MZ1024EFF100-I/GJX

PIC32MZ1024EFF100-I/GJX - 200MHz 32-bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFF100-I/GJX is a high-performance 32-bit microcontroller from the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, running at up to 200 MHz with 1 MB of Flash and 256 KB of SRAM, packaged in a 100-ball TFBGA (GJX) measuring 7x7 mm. The device integrates a MIPS32 M-Class Warrior core with DSP enhancements, four 64-bit accumulators, single-cycle MAC, and an IEEE 754-compliant FPU delivering 330 DMIPS, while the no-crypto variant strips the hardware encryption engine to lower cost. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable peripherals. Within the broader taxonomy, the PIC32MZ EF belongs to the 32-bit MCU class, then to the MIPS-based MCU family, and finally to Microchip's connectivity-oriented EF sub-family that targets Internet-of-Topics applications in industrial, IoT, graphics/HMI, and motor-control markets. Key differentiating features include 200 MHz core speed, IEEE 754 hardware floating point, up to 2 MB Flash / 512 KB SRAM ceiling across the family, 12-bit ADC up to 18 MSPS, USB 2.0 High-Speed with PHY, 10/100 Ethernet MAC, dual CAN 2.0b controllers, and a dedicated graphics interface (GDMA/PU) suitable for color TFTs. The 100-pin TFBGA offers the densest package in the family at 7x7 mm. Architecturally, the PIC32MZ EF combines the M-Class MIPS Warrior core, a multi-channel DMA engine, and a peripheral bus matrix that decouples I/O from CPU throughput. This lets the CPU reach 330 DMIPS while high-bandwidth interfaces such as HS-USB and Ethernet operate in parallel without stalling firmware execution. Typical applications include industrial IoT gateways with Ethernet and USB, graphics HMI panels using the integrated GPU/diaper-point TFT controller, automotive infotainment prototypes, motor-control FOC drives, audio mixers with the I2S port, and connected medical instruments requiring Ethernet plus CAN connectivity. The wide peripheral mix supports both consumer and industrial-grade designs. When designing with this device, ensure the 100-ball BGA has properly designed escape routing on at least a 4-layer PCB; the 0.5 mm ball pitch requires HDI stack-up with microvias. Use Microchip's MPLAB Harmony v3 framework for peripheral drivers and FreeRTOS port, and verify the operating temperature range or use the E/GJX variant if -40C to +125C is required. This page synthesizes distributor pricing, drop-in 100-pin TFBGA replacements from Microchip's own EF/EFE/ECG family, side-by-side specifications, and practical PCB design notes beyond what the manufacturer datasheet alone provides.

USD $10,05 En stock
PIC32MZ1024EFF100-I/PF - 200MHz 32-Bit MCU, 1MB Flash, 100-TQFP | Microchip
PIC32MZ1024EFF100-I/PF

PIC32MZ1024EFF100-I/PF - 200MHz 32-Bit MCU, 1MB Flash, 100-TQFP | Microchip

The Microchip Technology PIC32MZ1024EFF100-I/PF is a high-performance 32-bit MIPS microcontroller from the PIC32MZ EF family, featuring a MIPS32 M-class core running up to 200 MHz with 1 MB of Flash and 256 KB of SRAM in a 100-pin TQFP package measuring 14x14 mm. A 32-bit microcontroller (MCU) is a programmable system-on-chip that integrates a high-performance processor core, on-chip memory, and a rich set of peripherals into a single device. Within the broader hierarchy of embedded computing, MCUs sit between simple microprocessors (which require external memory) and full application processors (which run rich operating systems). The PIC32MZ EF family in particular targets high-throughput industrial, automotive, IoT, graphics (HMI), and motor-control applications where deterministic real-time performance and substantial connectivity peripherals are required. Key features of the PIC32MZ1024EFF100-I/PF include a MIPS32 M-class core with hardware multiply/divide and DSP extensions, integrated FPU, 1 MB Flash program memory, 256 KB SRAM, and a dedicated 16 KB I-cache plus 4 KB D-cache. The device integrates Hi-Speed USB 2.0 (480 Mbps) with integrated PHY, two Ethernet MACs with RMII/MII interfaces, two CAN 2.0b controllers, six UART, four SPI, and five I2C peripherals. It also features a 12-bit 5 MSPS ADC with up to 48 analog inputs, multiple timer/counter modules, and a Peripheral Pin Select (PPS) mapping engine that allows flexible function assignment to physical pins. The architecture pairs a 5-stage pipeline MIPS core with tightly coupled SRAM and dedicated DMA, enabling deterministic interrupt response. The integrated SQI (Serial Quad Interface) controller supports high-throughput external Flash/PSRAM expansion, while the crypto accelerator (F variant) provides hardware AES, DES, and SHA engines. The part operates from 2.3V to 3.6V across the industrial -40C to +85C range. Typical applications include industrial automation controllers, IoT edge gateways, HMI/touch-screen graphics terminals, motor-control BLDC/PMSM drives, automotive body and chassis ECUs, USB peripherals and instrumentation, and high-speed Ethernet-connected embedded nodes. The combination of high core speed, dual Ethernet, USB-HS, and CAN makes it well suited to connected industrial nodes that must simultaneously run a TCP/IP stack and a CANopen or J1939 stack. When designing with the PIC32MZ1024EFF100-I/PF, allocate decoupling capacitance (typically 100 nF per VDD/VSS pin pair plus bulk 4.7 uF to 10 uF) directly beneath the package, and route the 12 MHz primary crystal traces symmetrically to minimize EMI. The Peripheral Pin Select remapping must be configured at startup before any digital peripheral will function; review the PPS lock sequence in the device family reference manual. This page synthesizes verified distributor pricing, drop-in same-package alternatives, and practical engineering notes not found in the manufacturer datasheet alone.

USD $6,95 En stock
PIC32MZ1024EFF100-I/PT - 200MHz 32-bit MCU, 1MB Flash|Microchip
PIC32MZ1024EFF100-I/PT

PIC32MZ1024EFF100-I/PT - 200MHz 32-bit MCU, 1MB Flash|Microchip

TheMicrochip Technology PIC32MZ1024EFF100-I/PT is a high-performance 32-bit MIPS MCU from the PIC32MZ EF family, running up to 200 MHz and delivering up to 330 DMIPS, packaged in a100-pin TQFP (12x12 mm) with 1 MB Flash and 256 KB SRAM.It integrates an IEEE 754-compliant FPU, four 64-bit accumulators, single-cycle MAC, saturating and fractional math, plus DSP-enhanced instructions ona MIPS Warrior M-class core. The MCU integrates HS USB, Ethernet MAC, CAN, multiple I2C/SPI/UART peripherals, a 12-bit ADC up to 5 MSPS, and SQI for external serial Flash, targeting connectivity, graphics/HMI and motor control. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, I/O peripherals, and often analog/digital conversion.The PIC32 lineoccupies the 32-bit performance tier of Microchip's portfolio, positioned above PIC24/dsPIC and below the SAM S70/S71 Cortex-M7 seriesfor developers needing MIPS-class throughput with deterministic interrupt latency and amature MPLAB Harmony toolchain. Key features include 1 MB Live-Update Flash (Dual-Panel), 256 KB SRAM with 16 KB tightly-coupled cache, a 12-bit 5 MSPS ADC with up to 48 channels, a 12-bit 1 MSPS DAC, Hi-Speed USB 2.0 OTG, 10/100 Mbps Ethernet MAC with dedicated DMA, two CAN 2.0B controllers, and a graphics-friendly 32-bit PMP. The 100-pin TQFP exposes six SPI/I2S modules, six UART modules and four I2C buses for sensor aggregation. The PIC32MZ EF family uses a 5-stage pipelinedMIPS Warrior M-class core with a hardware multiply-divide unit and FPU.It supports live-update firmware via dual-panel Flash, enabling OTA-style image swaps without external memory.JTAG and 2-wire trace (PCLK/TDO) are available, andcrypto/authentication can be added via acompanion ECC608A or ATECC608B over I2C. Typical applications include industrial HMI panels with TFT-LCD + Resistive Touch, automotive CAN gateways (functional-safety variants availablein PIC32MZ EF 'EF' '-V' grade), IoT gateways with Ethernet + Wi-Fi co-existence, motor-control FOC drives up to 1 kW, and audio/graphics USB peripherals.Designers should pair it with an external 25 MHz crystal plus internal PLL to derive the 200 MHz core clock, and reserve dedicated layers for the analog/digital grounds per Microchip TB3071. The 100-pin TQFP suits hand-solderable prototyping and entry-levelproduction lines where BGAs are impractical. When migrating from PIC32MX, engineers gain roughly 4-5x DMIPS, double the SRAM, and full DSP/FPU support, but must adoptMPLAB Harmony v3 and re-validate interrupt prioritiesfor the new GENERIC_VECTOR scheme. This page synthesizesdistributor pricing, verifieddrop-in alternatives fromSiteMPN cross-reference,and engineering design notes not found inthemanufacturer datasheet.

USD $8,50 En stock
PIC32MZ1024EFF100T-I/GJX - 200MHz 1MB Flash MCU | Microchip
PIC32MZ1024EFF100T-I/GJX

PIC32MZ1024EFF100T-I/GJX - 200MHz 1MB Flash MCU | Microchip

The Microchip Technology PIC32MZ1024EFF100T-I/GJX is a 32-bit MIPS32 M-Class microcontroller from the PIC32MZ EF family, delivering 200 MHz CPU clock, 1 MB Flash, and 256 KB SRAM in a 100-pin TFBGA (7x7 mm) package with industrial -40C to +85C operating range. The device integrates HS USB, Ethernet MAC, CAN, SQI flash interface, 32-bit FPU, DSP instructions, audio I2S/SSI and graphics peripherals in a single SoC, targeting high-performance embedded connectivity applications. A 32-bit microcontroller (MCU) is a programmable processor with on-chip memory and peripherals that executes instructions from a 32-bit datapath. Within the embedded hierarchy it sits above 8/16-bit MCUs in computational throughput while remaining lower cost and lower power than microprocessors (MPUs) that require external memory. The PIC32MZ EF family is positioned as a high-performance connectivity MCU family, sitting below the PIC32MZ EFH (with Crypto) and PIC32MX (legacy) families within Microchip's 32-bit MCU portfolio. Key features include a hardware Floating Point Unit (FPU) for single/double precision IEEE 754 math, 12-bit 18 MSPS ADC, four analog comparators, six UART, four SPI, four I2C, dedicated HS USB 2.0 On-The-Go PHY, 10/100 Ethernet MAC with RMII/MII interface, two CAN 2.0b controllers, SQI (Serial Quad Interface) for high-speed external flash/XIP, and Peripheral Pin Select (PPS) that allows flexible remapping of digital functions to any I/O pin. Architecturally, the PIC32MZ EF implements the MIPS M-Class core with 16 KB I-cache and 4 KB D-cache, a 9-stage pipeline, MMU, and tightly-coupled DSP ASE instructions. The 200 MHz core delivers 252 DMIPS / 3.28 CoreMarks per MHz performance, with deterministic interrupt response suitable for real-time control. SQI interface can address up to 128 MB external serial flash, enabling data-heavy applications such as graphics or audio streaming to offload non-volatile storage. Typical applications include industrial automation controllers, IoT gateways with Ethernet/HS USB connectivity, HMI graphics displays, motor control FOC drives, audio mixing consoles, and automotive body controllers. The combination of HS USB, ENET, and CAN in one chip makes it well suited for connected industrial nodes that bridge fieldbus to Ethernet. When designing with this MCU, allocate at least 4-layer PCB and consider thermal performance - at 200 MHz the device dissipates measurable power. Decouple every VDD/VSS pair with 100 nF ceramic plus bulk capacitors, and route HS USB D+/D- as 90-ohm differential with length matching. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $9,50 En stock
PIC32MZ1024EFF100T-I/PF - 200MHz 32-bit MCU, 1MB Flash, 100-TQFP
PIC32MZ1024EFF100T-I/PF

PIC32MZ1024EFF100T-I/PF - 200MHz 32-bit MCU, 1MB Flash, 100-TQFP

The Microchip Technology PIC32MZ1024EFF100T-I/PF is a high-performance 32-bit MIPS32 M-Class PIC microcontroller running up to 200 MHz, integrating 1 MB of Flash program memory and 256 KB of SRAM in a 100-pin TQFP (14x14 mm) package. It belongs to the PIC32MZ EF family, which is engineered for connectivity-rich industrial, automotive, IoT, graphics (HMI), and motor-control applications. The device integrates Hi-Speed USB, Ethernet, CAN, SQI, and a 200 MHz core with floating-point unit. An MCU (microcontroller unit) is a single-chip computer containing a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals. The PIC32MZ EF family occupies the high-performance tier in Microchip's PIC32 portfolio, sitting above the PIC32MX and PIC32MM families and below the PIC32MK and dual-core PIC32CK parts. Within the power-management hierarchy, the MCU orchestrates power sequencing, sleep modes, and peripheral enable gating for the entire embedded system. Key features include the MIPS32 microAptiv core with DSP and FPU, 1 MB Live-Update Flash (allowing field updates without downtime), 256 KB SRAM, 8-channel DMA, multiple I2C/SPI/UART interfaces, 12-bit ADC, and hardware crypto accelerators. The 100-pin TQFP offers generous GPIO count for HMI panels and industrial gateways, while integrated Hi-Speed USB and Ethernet controllers enable connected-product designs without external bridges. The architecture supports real-time deterministic operation via dedicated peripheral trigger logic, DMA-driven data movement, and a 9-channel hardware motor-control PWM (MCPWM) peripheral. The Floating Point Unit accelerates sensor-fusion and control-loop math, while the DSP engine supports audio codec post-processing and FFT-based vibration analysis. Live-Update Flash lets a redundant firmware image overwrite the active image, which is critical for industrial equipment with 24/7 uptime requirements. Typical applications include industrial HMI panels, IoT gateways, USB/Ethernet-connected motor drives, automotive infotainment, and graphical touch-screen controllers. The part's high GPIO count and dual connectivity interfaces make it a strong fit for multi-protocol sensor hubs. Designers often pair it with Microchip's KSZ8081 PHY, MIC2026 USB power switch, and LAN8742 Ethernet transceiver for full connectivity stacks. When designing with this device, plan the power-rail decoupling for the high-speed 200 MHz core and ensure that the SQI interface traces are length-matched. The 100-TQFP package requires 14x14 mm of board area and is suitable for hand-rework and prototype builds but lacks the 252 MHz speed bin offered by the PIC32MZ1024EFF100T-250I/PF variant. This page synthesizes distributor pricing, verified drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone - giving engineers an actionable starting point for PIC32MZ EF Bring-Up.

USD $8,95 En stock
PIC32MZ1024EFF124-E/TL - 180MHz 1MB Flash MCU | Microchip
PIC32MZ1024EFF124-E/TL

PIC32MZ1024EFF124-E/TL - 180MHz 1MB Flash MCU | Microchip

The Microchip Technology PIC32MZ1024EFF124-E/TL is a high-performance 32-bit MIPS32 M-Class microcontroller running up to 180 MHz (up to 252 MHz on the EF family) with 1 MB of Flash program memory and 256 KB SRAM, housed in a 124-pin VTLA (9x9 mm) package with exposed pad. It integrates an IEEE 754-compliant hardware Floating Point Unit (FPU), Dual Panel Flash for live field updates, DSP-enhanced core with single-cycle MAC and four 64-bit accumulators, and a rich connectivity peripheral set including CAN, Ethernet, USB OTG, I2C, SPI, UART, SQI, EBI/EMI and PMP. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and programmable peripherals around a common bus. The PIC32MZ EF series extends the PIC32 architecture with a hardware FPU, faster flash access, and richer connectivity, positioning it between traditional 8/16-bit MCUs and higher-end Cortex-M4/M7 parts for applications that need deterministic real-time control combined with TCP/IP or USB stacks. Key features include 200 MHz / 330 DMIPS core performance, hardware FPU for single/double-precision IEEE 754 math, Dual Panel Flash allowing live firmware update without downtime, and an extensive peripheral set (CAN, Ethernet, USB OTG, SQI, PMP). The -E temperature grade supports the industrial -40C to +125C range; the -I grade is +40 to +85C. Security features include unique device ID and Flash OTP lock bits. Typical applications include industrial HMI and graphics, IoT edge gateways with Ethernet/USB connectivity, automotive body and infotainment sub-modules (AEC-Q100 grade parts), motor control FOC drives, and secure connected devices. The wide peripheral set also supports multi-protocol industrial bridges. When designing with this device, pay close attention to the decoupling network (a 0.1 uF + bulk cap on each VDD/VBAT pin), trace the exposed pad (EP) to a continuous ground plane for thermal dissipation, and validate the live-update Dual Panel Flash flow against application safety requirements. Program the configuration words early and lock them to prevent accidental brown-out or code-protect changes. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet. Specifications below are anchored to Microchip's published PIC32MZ EF family data sheets and current distributor listings.

USD $8,10 En stock