Microcontroladores

PIC32MZ2048EFH100-250I/GJX

PIC32MZ2048EFH100-250I/GJX - 252MHz 32-bit MCU 2MB Flash | Microchip

The Microchip PIC32MZ2048EFH100-250I/GJX is a 32-bit MIPS MCU from the PIC32MZ EF family running at up to 252 MHz (415 DMIPS) with 2 MB Flash and 512 KB SRAM, packaged in a 100-pin TFBGA (7x7 mm). It integrates a hardware Floating Point Unit (FPU), IEEE 754-compliant single- and double-precision math, a DSP-enhanced core with four 64-bit accumulators and single-cycle MAC, plus High-Speed USB, Ethernet MAC, CAN, SQI, and 12-bit ADC. A 32-bit microcontroller (MCU) is an integrated processor core, program memory, data memory, and a rich set of peripherals on a single silicon die. The PIC32MZ EF family extends the 32-bit MCU taxonomy to high-performance connected nodes - 32-bit MCU -> embedded microcontroller -> SoC -> semiconductor - targeting designs that demand deterministic real-time control alongside wired connectivity and graphics HMI throughput. Key features include dual-panel Live-Update Flash for in-field firmware swap without downtime, dedicated crypto accelerators for AES/DES/SHA, a 200 MHz peripheral bus with independent DMA, and a graphics-friendly PMP/EPMP interface. The 100-pin TFBGA footprint delivers high pin density for space-constrained industrial and IoT gateways while exposing the full peripheral set. Architecture-wise, the device pairs the MIPS Warrior M-class core with a tightly-coupled FPU and dedicated DSP instructions, enabling sensor-fusion and audio-processing workloads to run on bare metal without an RTOS. The dual Flash banks, configurable ECC, and a hardware random number generator (RNG) accelerate IEC 62443-aligned firmware deployment. Typical applications include industrial IoT gateways, automotive HMI graphics, Ethernet-attached motor controllers, audio processing front-ends, and high-speed USB device/host peripherals. The combination of FPU throughput and 2 MB Flash makes the part suitable for protocols such as Modbus TCP, EtherCAT slave stacks, and lightweight TLS firmware where deterministic ISR latency and connected peripherals coexist. A primary design consideration is power-supply decoupling on the 100-pin BGA: place 100 nF X7R bypass caps directly under each VDD/VSS pair on the opposite PCB layer and keep trace lengths under 5 mm to the bond-wire balls. Also budget the Live-Update Flash swap window (~250 ms typical for the full 2 MB bank) when designing brown-out recovery and watchdog sequencing. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone Microchip datasheet.

USD $13,50 En stock

PIC32MZ2048EFH100-250I/PT

PIC32MZ2048EFH100-250I/PT - 250MHz 32-bit MCU, 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048EFH100-250I/PT is a high-performance 32-bit MIPS32 M-Class microcontroller from the PIC32MZ EF family, featuring a 250MHz MIPS Warrior M-class core (up to 252MHz / 415 DMIPS), 2MB of Dual-Panel Flash with live-update support, and 512KB of SRAM, all housed in a 100-pin TQFP (12x12 mm) package. The integrated IEEE 754-compliant FPU, four 64-bit accumulators, single-cycle MAC, saturating and fractional DSP math, plus 2MB Live-Update Flash and 512KB SRAM make this part a flagship PIC32 device for connected embedded systems. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a high-performance CPU, on-chip memory (Flash for code, SRAM for data), and a rich set of peripherals (USB, Ethernet, CAN, SQI, ADC, timers, GPIO) into one package. The PIC32MZ EF family sits at the top of Microchip's PIC32 hierarchy, which itself descends from the 8-bit PIC lineage, extending to MIPS-based 32-bit devices aimed at industrial, IoT, graphics/HMI, motor control, and automotive connectivity applications. Compared to ARM Cortex-M4/M7 devices, PIC32MZ EF MCUs pair an FPU with a deterministic interrupt model and Microchip's MPLAB Harmony firmware ecosystem. Key features of the PIC32MZ2048EFH100-250I/PT include a 32-bit MIPS32 M-class core running at 250MHz (252MHz maximum), 2MB Dual-Panel Flash supporting live firmware update without downtime, 512KB SRAM, HS USB 2.0 with physical layer, 10/100 Ethernet MAC, CAN, SQI (Serial Quad Interface) for high-speed external memory, 12-bit ADC up to 18 MSPS, and a crypto engine with true RNG. The TQFP-100 footprint provides 78 programmable I/O, multiple UART/SPI/I2C peripherals, and dual ADC modules, enabling single-chip connectivity solutions without external glue logic. The PIC32MZ2048EFH100-250I/PT's 32-bit MIPS core with integrated FPU accelerates floating-point math for control loops and graphics rendering, while the 4KB instruction cache (with configurable prefetch) and tightly-coupled SRAM reduce Flash wait states. Dual-panel Flash architecture lets one bank run application code while the other receives an OTA image, enabling field firmware upgrades without service interruption. The 18 MSPS 12-bit ADC supports high-bandwidth current/voltage sensing for motor control and power conversion. Typical applications include industrial IoT gateways, graphics/HMI touch panels, motor-control drives (BLDC/PMSM), automotive connectivity modules, Ethernet-connected sensors, and USB-enabled medical devices. The combination of HS USB, Ethernet, and CAN lets a single chip replace two or three discrete MCUs in multi-protocol systems. When designing with this part, ensure the 100-pin TQFP is within thermal and routing capability - the chip can dissipate roughly 0.5W at full CPU and peripheral load. Use the SQI interface for high-throughput external NOR flash to support OTA logging, and leverage the dual-panel Flash for fail-safe firmware upgrades. The supplied 5V-tolerant I/O simplifies interface to legacy 5V sensors. This page synthesizes distributor pricing, drop-in alternatives drawn from the same PIC32MZ EF family, and practical design notes not found in the manufacturer datasheet, giving engineers a single consolidated reference for sourcing and evaluating the PIC32MZ2048EFH100-250I/PT.

USD $9,40 En stock

PIC32MZ2048EFH100-E/GJX

PIC32MZ2048EFH100-E/GJX - 200MHz 32-bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048EFH100-E/GJX is a high-performance 32-bit MIPS32 M-Class microcontroller running at 200 MHz with 2 MB of Live-Update Flash and 512 KB SRAM, housed in a 100-ball 7x7 mm TFBGA (GJX) package rated for the -40C to +125C automotive temperature range (AEC-Q100 qualified). It integrates a floating-point unit, Hi-Speed USB, 10/100 Ethernet MAC, CAN 2.0b, SQI, EBI, and a rich set of advanced analog peripherals targeting Industrial, IoT, HMI/Graphics, and Motor Control segments. A 32-bit microcontroller (MCU) is a programmable system-on-chip combining a CPU, memory, peripherals, and I/O. The MIPS32 M-Class microAptiv core family sits within the broader hierarchy of microcontroller -> embedded processor -> RISC CPU -> semiconductor. The PIC32MZ EF series adds a hardware Floating Point Unit for IEEE 754 single/double precision, eliminating software FP emulation in DSP and graphics workloads. Live-Update Flash enables firmware dual-bank OTA swap without chip reset, critical for always-on connected products. Key features include 200 MHz core / 252 MHz extended performance, 2 MB Live-Update Flash (dual-bank), 512 KB SRAM, 8-channel DMA, Hi-Speed USB 2.0 OTG with dedicated DMA, 10/100 Ethernet MAC with MII/RMII, two CAN 2.0b modules, up to six UART, four SPI, five I2C, parallel master port (PMP/EBI), SQI (Serial Quad Interface) for XIP memory expansion, 12-bit ADC up to 18 Msps, 16-bit PWM, and a TFT/GPU graphics interface (GPU module with 2D acceleration). The 100-ball GJX TFBGA package suits compact, high-density PCB designs with full 5V-tolerant digital I/O. The architecture combines a deterministic interrupt controller, dual-bank Flash with ECC, and a multi-channel DMA engine to offload peripherals from the CPU, sustaining throughput for industrial Ethernet or USB streaming while leaving headroom for an RTOS or application logic. AEC-Q100 Grade 1 qualification and the extended -40C to +125C operating range support under-hood and industrial cabinet deployments. Typical applications include industrial HMI panels with TFT touch, IoT edge gateways with Ethernet and Wi-Fi co-processor bridging, automotive body and infotainment subsystems, motor control FOC drives with high-resolution PWM, USB audio/MIDI products, and secure connected medical devices leveraging the Live-Update Flash for fail-safe OTA. Designers should allocate the 100-ball TFBGA escape with at least 6 PCB layers, providing a solid ground plane beneath the part and decoupling each VDD/VBUS rail with 100 nF plus 4.7 uF ceramic capacitors placed within 3 mm of the package balls. Program the dual-bank Flash map carefully to ensure bootloader and golden-image partitioning fits the 2 MB budget. This page synthesizes real-time distributor pricing, parametric drop-in PIC32 family alternatives, and application-specific PCB/design notes not consolidated in the Microchip datasheet.

USD $11,20 En stock

PIC32MZ2048EFH100-E/PF

PIC32MZ2048EFH100-E/PF - 200MHz 2MB MCU 100-TQFP | Microchip

The Microchip PIC32MZ2048EFH100-E/PF is a high-performance 32-bit microcontroller from the PIC32MZ EF family, featuring a MIPS32 M-class Warrior core running up to 200 MHz with 415 DMIPS, 2 MB of dual-panel Flash and 512 KB SRAM, and an integrated IEEE 754-compliant Floating Point Unit (FPU), in a 100-pin TQFP package with 14x14 mm body. What is a PIC32MZ EF microcontroller? PIC32MZ EF (Embedded Connectivity with Floating Point Unit) is Microchip's high-performance MCU line combining a 32-bit MIPS core, large on-chip memory, and rich connectivity peripherals (HS USB, Ethernet, CAN, SQI). Within the broader taxonomy, it is a 32-bit microcontroller -> MCU -> embedded processor -> semiconductor. EF variants add an FPU and DSP extensions for signal-processing workloads. Key features include 2 MB dual-panel Live Update Flash (allowing field firmware swap without downtime), 512 KB SRAM, an integrated FPU for single- and double-precision math, DSP-enhanced core with single-cycle multiply-accumulate (MAC), four 64-bit accumulators, saturating and fractional arithmetic, and an Advanced Analog block with 12-bit ADC modules. The part carries the -E temperature grade (extended -40C to +125C). On the connectivity side the device integrates Hi-Speed USB 2.0 (Host/Device/OTG), 10/100 Ethernet MAC with MII/RMII, two CAN 2.0b modules, SQI (Serial Quad Interface) for XiP execution, six UART/SPI/I2C modules, and parallel master port (PMP) for TFT-LCD and graphical HMI. Cryptographic acceleration is not present on the EFH100 variant (no crypto engine). Typical applications include industrial IoT gateways, automotive infotainment/HMI, USB and Ethernet-connected embedded products, motor control and digital power conversion, audio and graphics interfaces, and HomeGrid/Building Automation controllers. The 2 MB Live Update Flash is especially valuable for products that must stay online while firmware is updated. Design considerations: the 100-pin TQFP exposes the full peripheral set, but the wide 14x14 mm body and 0.5 mm pitch demand careful escape routing. Decouple each VDD/VSS pair with 100 nF plus bulk 4.7 uF placed within 2 mm of the pins. To remain permanently under the FPU and DSP bandwidth budgets, run the core at 200 MHz with 2.7-3.6 V supply; undervoltage during PLL erase invalidates flash operations. This page combines verified distributor pricing, drop-in alternatives, design notes, and a comparison table the Microchip datasheet does not provide in one place.

USD $12,35 En stock

PIC32MZ2048EFH100-E/PT

PIC32MZ2048EFH100-E/PT - 32-bit MCU 252MHz 2MB Flash | Microchip

The Microchip PIC32MZ2048EFH100-E/PT is a high-performance 32-bit MIPS32 M-Class microcontroller running up to 252 MHz, integrating 2 MB of Flash and 512 KB of SRAM in a 100-pin TQFP (PT) package. This device is part of the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, featuring a MIPS Warrior M-class core, IEEE 754-compliant FPU, and DSP-enhanced arithmetic with four 64-bit accumulators and single-cycle MAC operations. A 32-bit MCU (microcontroller) is an integrated circuit combining a high-performance processor core, on-chip memory, and a rich set of peripherals (timers, ADCs, communication controllers) on a single die. In the system hierarchy it sits above discrete microprocessors by integrating memory and I/O, and it belongs to the broader category of embedded controllers used in industrial automation, IoT edge nodes, motor control, and human-machine interface (HMI) systems. Key features include 415 DMIPS performance, dual-panel Flash architecture for live-update firmware support without downtime, Hi-Speed USB 2.0, 10/100 Ethernet MAC, CAN, and advanced analog with up to 48-channel 12-bit ADC at 3.75 Msps. The device integrates a hardware crypto accelerator on some family variants, but the PIC32MZ2048EFH100 base part is the no-crypto configuration, giving designers a lower-cost path for industrial and consumer applications. Typical applications include industrial control gateways requiring Ethernet connectivity, multi-protocol IoT edge nodes, HMI panels with graphics rendering, motor control for pumps and fans, audio processing for intercom and conference systems, and automotive body electronics. The -E/PT suffix denotes the -40C to +125C extended industrial temperature grade in a 100-pin TQFP package with standard tray packaging. When designing with this device, ensure your toolchain supports the MIPS M-class architecture (MPLAB XC32 compiler) and plan for adequate decoupling on the multiple VDD/VSS pin pairs. Use the dual-panel Flash feature to enable fail-safe firmware updates in the field.

USD $12,10 En stock

PIC32MZ2048EFH100-I/GJX

PIC32MZ2048EFH100-I/GJX - 200MHz MCU 2MB Flash 100-TFBGA | Microchip

The Microchip Technology PIC32MZ2048EFH100-I/GJX is a high-performance 32-bit microcontroller built on the MIPS32 M-Class (microAptiv) core running at 200 MHz (with the -250 variant reaching 252 MHz), integrating 2 MB of dual-panel Flash and 512 KB of SRAM in a 100-ball TFBGA package measuring 7 mm x 7 mm. It targets industrial, automotive, IoT, graphics/HMI, and motor-control applications where rich connectivity (USB-HS, Ethernet, CAN, SQI) and DSP/FPU performance are required. What is a PIC32MZ microcontroller? The PIC32MZ EF family sits at the top of Microchip's MIPS-based 32-bit MCU portfolio, classified as an embedded connectivity MCU with FPU. In the broader taxonomy: microcontroller (MCU) -> 32-bit MCU -> MIPS-based MCU -> PIC32 family -> PIC32MZ EF sub-family -> high-performance connectivity segment. It pairs an IEEE 754-compliant FPU with a DSP-enhanced core (four 64-bit accumulators, single-cycle MAC, saturating and fractional math), giving it up to 415 DMIPS / 3.28 CoreMark/MHz of throughput. Key features include a Crypto engine, 12-bit 18 MSPS ADC up to 48 channels, four comparators, four I2C, six UART, and Hi-Speed USB with PHY. The dual-panel Flash architecture enables live firmware updates without downtime, a critical feature for industrial gateways and remote sensors. Integrated peripherals such as Ethernet MAC, CAN 2.0B, and SQI (Serial Quad Interface) eliminate the need for external connectivity ICs, reducing both BOM cost and PCB area. The PIC32MZ2048EFH100-I/GJX uses a 5-stage pipeline, hardware multiply/divide, and tightly-coupled SRAM for deterministic interrupt latency. The dual-panel Flash provides seamless field upgrades, while dedicated crypto accelerators (AES, 3DES, SHA, MD5, HMAC) handle secure-boot and TLS workloads without burdening the CPU. The integrated 12-bit 18 MSPS ADC supports up to 48 analog inputs simultaneously, suiting motor-control and multi-sensor data acquisition. Typical applications include industrial automation controllers, automotive infotainment and HMI, IoT edge gateways, graphics-driven HMI panels, and BLDC/PMSM motor control. The wide connectivity suite also suits medical patient monitors and building-automation controllers that need Ethernet, CAN, and USB simultaneously. When designing with this MCU, budget attention to decoupling: at 200 MHz core clock with simultaneous peripheral activity, VDD/VUSB rails require multiple low-ESR 100 nF + bulk capacitors placed within 2 mm of each ball group. The dual-panel Flash simplifies field firmware upgrades but requires careful linker script setup; consult Microchip application notes on live update. This page synthesizes distributor pricing, drop-in alternatives from the same PIC32MZ EF family, and practical PCB layout guidance not found in the standalone datasheet.

USD $13,50 En stock

PIC32MZ2048EFH100-I/PF

PIC32MZ2048EFH100-I/PF - 200MHz 32-bit MCU 2MB Flash | Microchip

The Microchip PIC32MZ2048EFH100-I/PF is a high-performance 32-bit microcontroller based on the MIPS32 M-Class core running up to 200 MHz, integrating 2 MB of Live-Update Flash and 512 KB of SRAM in a 100-pin TQFP package. It belongs to the PIC32MZ EF (Embedded Connectivity with Floating Point Unit) family, targeting connectivity-rich applications across industrial, automotive, IoT, graphics/HMI, and motor control segments. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals (ADC, timers, communication interfaces) onto one die. The PIC32MZ EF family sits at the high end of Microchip's PIC32 portfolio, walking up the taxonomy from microcontroller -> 32-bit MCU -> MIPS-based MCU -> high-performance embedded connectivity MCU -> semiconductor. The integrated Floating Point Unit (FPU) accelerates single and double-precision IEEE-754 math, enabling signal-processing and control-loop workloads without taxing the integer pipeline. Key features include a hardware FPU, 2 MB dual-bank Live-Update Flash for field-upgradable firmware, 512 KB SRAM, Hi-Speed USB 2.0 with PHY, 10/100 Ethernet MAC, two CAN 2.0b controllers, a 12-bit 48-channel ADC at up to 3.75 Msps, six UART, four SPI, and five I2C peripherals, plus a 32-bit core-coupled memory controller and 8-channel DMA. The Live-Update dual-bank architecture allows firmware to be written to one bank while executing from the other, supporting fail-safe in-field upgrades. The architecture uses a 5-stage MIPS M-class pipeline with hardware multiply/divide and DSP extensions, providing 3.27 CoreMark/MHz performance. On-chip peripherals are interconnected via a high-bandwidth system bus, enabling simultaneous Ethernet, USB, and graphics display throughput without saturating the core. Industrial-grade temperature operation is supported. Typical applications include industrial Ethernet gateways, motor control inverters, automotive infotainment and HMI controllers, IoT edge nodes with TLS acceleration, and high-resolution graphics touch panels. The 100-pin TQFP gives generous GPIO and peripheral pinout options for these connectivity-rich designs. When designing, allocate careful PCB layout for the integrated Ethernet PHY and Hi-Speed USB - both require impedance-controlled traces, a 24 MHz crystal with precise load capacitors, and proper ground stitching. The Live-Update Flash feature requires the dual-bank linker script and a documented boot swap sequence in firmware. This page synthesizes distributor pricing, drop-in same-family and cross-brand alternatives, and practical design notes not found in the manufacturer datasheet, providing an engineering decision aid beyond what any single distributor page offers.

USD $11,88 En stock

PIC32MZ2048EFH100-I/PT

PIC32MZ2048EFH100-I/PT - 200MHz 32-bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048EFH100-I/PT is a high-performance 32-bit microcontroller based on the MIPS32 M-Class core, operating at up to 200 MHz with an integrated IEEE 754 Floating Point Unit (FPU), 2 MB of Flash program memory, and 512 KB of SRAM, all housed in a 100-pin TQFP (12x12 mm) industrial-temperature package. The part delivers up to 330 DMIPS of core performance, includes a 9-channel hardware crypto engine (AES, 3DES, SHA, MD5, HMAC), and integrates connectivity peripherals: Hi-Speed USB 2.0, 10/100 Ethernet MAC with RMII/MII, two CAN 2.0b controllers, six UART, four SPI, and five I2C ports. What is a 32-bit microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one die. 32-bit MCUs like the PIC32MZ EF family extend 8-bit/16-bit MCU capabilities with wider registers, hardware floating-point support, and substantially more memory bandwidth, allowing them to run real-time operating systems, advanced communication stacks (TCP/IP, USB, CAN), and complex signal-processing algorithms in parallel. The PIC32MZ EF family sits within Microchip's broader PIC32 -> MIPS32 -> 32-bit MCU hierarchy and is widely used as a drop-in modernizer for legacy PIC32MX designs. Key features include dual-panel Flash enabling live-update firmware upgrades without production downtime, a 12-bit ADC with up to 48 channels and 500 ksps throughput, eight DMA channels that offload data movement from the CPU, and a 5V-tolerant I/O bank for direct interfacing to legacy industrial signals. The 2 MB program Flash is large enough to embed a full TLS 1.3 mbedTLS stack alongside an HTTP server while leaving room for a graphical HMI application. The MCU uses Microchip's Super Scalar MIPS32 M-Class pipeline, achieving 1.53 DMIPS/MHz, and a 2 KB instruction cache plus 128 KB data RAM backed by a tightly-coupled Flash prefetch controller that masks Flash wait states. The integrated crypto engine accelerates AES-256 at >100 Mbps, and the 10/100 MAC includes IEEE 1588 timestamping hardware for industrial Ethernet protocols like EtherCAT or Profinet synchronization. Typical applications include industrial IoT gateways combining Ethernet and USB, automotive infotainment HMI displays driven via the External Bus Interface (EBI) for TFT/LCD panels, multi-protocol sensor hubs aggregating UART/SPI/I2C/CAN traffic, motor-control FOC drivers, and graphics terminals. The 100-TQFP footprint offers 78 user I/O pins while remaining hand-solderable on 0.5 mm pitch, ideal for prototype runs and small-batch industrial SKUs. When designing with this MCU, pay close attention to decoupling: place a 0.1 uF X7R ceramic on every VDD/VSS pair within 3 mm of the pins and a bulk 4.7-10 uF tantalum on the main 3.3 V rail. Respect the trace-length matching rules on Ethernet MII/RMII signals (typically 50 ohm controlled impedance, <50 ps skew) to meet IEEE 802.3 timing margins. This page synthesizes distributor pricing, drop-in same-package alternatives, parametric comparison, and design notes not consolidated in the manufacturer datasheet, giving engineers a faster path to a validated BOM decision.

USD $8,90 En stock

PIC32MZ2048EFH100T-250I/PT

PIC32MZ2048EFH100T-250I/PT - 250MHz 2MB Flash MCU | Microchip

The Microchip Technology PIC32MZ2048EFH100T-250I/PT is a 32-bit MIPS32 M-Class PIC microcontroller running up to 250 MHz, integrating 2 MB of Flash and 512 KB of SRAM in a 100-pin TQFP (12x12 mm) package. It is the tape-and-reel variant of the PIC32MZ2048EFH100-250I/PT, qualified for the industrial temperature range (-40C to +85C). A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data memory, and a rich set of peripherals such as timers, communication interfaces, and analog blocks. The PIC32MZ EF family belongs to the higher tier of the PIC32 hierarchy, which itself sits within the broader 32-bit MCU market that includes ARM Cortex-M and RISC-V devices. PIC32MZ EF parts target high-performance embedded connectivity applications, offering hardware floating-point and DSP extensions. Key features include a MIPS Warrior M-class 32-bit core with IEEE 754-compliant FPU, four 64-bit accumulators with single-cycle MAC and saturating/fractional math support, four hardware USB ports (USB 2.0 high-speed OTG), a 10/100 Mbps Ethernet MAC, dual CAN modules, six UART/SPI/I2C ports, a parallel master port, and a graphics controller with EBI. The integrated crypto engine offers AES, DES, 3DES, SHA, MD5, and HMAC for secure connectivity applications. Architecturally, the device uses a 5-stage pipeline with dual-panel Flash for live firmware updates, dedicated DMA, and a 12-bit 5 MSPS ADC with up to 48 channels. The 252 MHz maximum core frequency delivers up to 415 DMIPS, while the FPU and DSP extensions enable real-time signal processing and complex math in motor control and audio pipelines. Typical applications include industrial automation controllers, IoT gateways with Ethernet and USB-HS, automotive infotainment prototypes, motor control drives, and graphical HMI panels. The wide connectivity set (USB-HS + Ethernet + CAN) makes it well suited to protocol bridges and remote telemetry units. When designing with this MCU, allocate a dedicated 2.5V internal LDO bypass cap, follow decoupling guidance in the family datasheet, and reserve pins for JTAG/trace to simplify firmware bring-up.

USD $7,55 En stock

PIC32MZ2048EFH100T-E/GJX

PIC32MZ2048EFH100T-E/GJX - 200MHz 32-bit MCU 2MB Flash TFBGA-100 | Microchip

The Microchip PIC32MZ2048EFH100T-E/GJX is a high-performance 32-bit microcontroller from the PIC32MZ EF family, featuring a MIPS32 M-Class Warrior core running at 200 MHz (with a maximum capability of up to 252 MHz) and housed in a 100-pin TFBGA (7x7 mm) package. It integrates 2 MB of Flash and 512 KB of SRAM, and includes a hardware floating-point unit (FPU), DSP enhancements with single-cycle MAC, IEEE 754-compliant math, four 64-bit accumulators, and dual-panel Flash for live firmware updates. A 32-bit microcontroller (MCU) is an embedded processor that executes instructions over a 32-bit data path, combining high computational throughput with on-chip peripherals such as timers, ADCs, communication interfaces, and memory. The PIC32 family belongs to the broader class of microcontrollers within the integrated circuits (ICs) hierarchy: microcontroller -> embedded processor -> semiconductor device. The EF subfamily adds an FPU and DSP extensions, placing these parts between general-purpose MCUs and full DSP processors. Key features of this part include a 200 MHz core with up to 415 DMIPS performance, hardware FPU for fast single- and double-precision math, USB 2.0 High-Speed OTG, 10/100 Ethernet MAC, dual CAN 2.0b controllers, SQI (Serial Quad Interface) for high-speed external memory, a 12-bit ADC up to 5 MSPS, and multiple UART/SPI/I2C interfaces. The device supports up to 8 channels of DMA, parallel graphics port for HMI applications, and JTAG/ICSP debug interfaces. Typical applications include industrial connectivity gateways, IoT edge nodes, automotive HMI displays (AEC-Q100 qualified), motor control (BLDC/PMSM), and graphical user interfaces with TFT LCD panels. The wide peripheral mix and high Flash/RAM capacity make it well-suited for protocol conversion, secure boot, and complex real-time control loops. When designing with the PIC32MZ EF, plan the PCB layout for the TFBGA-100 7x7 mm footprint using microvia technology and 0.5 mm pitch escape routing. The high 200 MHz operation requires careful power-rail decoupling with 100 nF plus bulk capacitors on each VDD pin pair, and VREF+ filtering for ADC accuracy. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical thermal and PCB layout guidance that is not consolidated in the manufacturer datasheet.

USD $7,11 En stock

PIC32MZ2048EFH100T-I/GJX

PIC32MZ2048EFH100T-I/GJX - 200MHz 2MB Flash MCU | Microchip 100-TFBGA

The Microchip Technology PIC32MZ2048EFH100T-I/GJX is a 32-bit MIPS MCU from the PIC32MZ EF family, integrating a MIPS32 M-class Warrior core running at 200 MHz with 2 MB dual-panel Flash and 512 KB SRAM in a 7x7 mm 100-ball TFBGA package. It provides USB-HS, 10/100 Ethernet MAC, dual CAN, SQI, and a 12-bit 18-channel ADC alongside six UART, four SPI, and four I2C peripherals. The -I suffix designates the industrial -40C to +85C temperature grade, and the /GJX suffix identifies the TFBGA-100 (7x7 mm) package with tape-and-reel delivery. An MCU (microcontroller) is a single-chip computer containing a processor core, program memory, data memory, and a rich set of peripherals designed for embedded control. The PIC32MZ EF family belongs to the MIPS32 M-class Warrior architecture hierarchy, positioned between Microchip's PIC32MX and Cortex-M class competitors in performance. Within power management, it functions as the supervisory and computation node that drives GPIOs, manages communication stacks, and orchestrates sensors. The PIC32MZ EF family targets Industrial, automotive, IoT, Graphics/HMI and Motor Control market segments per Microchip's product page. Key features include 415 DMIPS at 252 MHz peak core performance (200 MHz in I-grade), 32 KB instruction cache, DSP-enhanced core with four 64-bit accumulators and single-cycle MAC with saturating and fractional math, IEEE 754-compliant FPU, dual-panel Flash supporting live update, and hardware crypto accelerators. The 12-bit ADC reaches 500 ksps with up to 18 analog channels. An integrated high-speed USB 2.0 PHY and 10/100 Ethernet MAC reduce BOM and PCB area. The PIC32MZ EF architecture pairs a 5-stage pipeline MIPS core with tightly-coupled SRAM, achieving 3.28 CoreMark/MHz and full deterministic interrupt latency. The dual-panel Flash layout enables concurrent firmware updates without service interruption, and the integrated crypto engine supports AES, SHA, DES/3DES, and true random number generation suitable for secure boot and TLS offload. Typical applications include industrial IoT gateways with Ethernet and USB-HS connectivity, automotive HMI graphics clusters, multi-axis motor control FOC drives, point-of-sale terminals, and medical patient monitors requiring deterministic real-time response. The 100-TFBGA package suits compact, reflow-compatible modules. When designing with this MCU, allocate sufficient decoupling (4.7 uF + 0.1 uF per VDD/VSS pair) and a low-impedance trace geometry to the 12-bit ADC reference inputs to preserve SNR; the high-speed ADC and Ethernet PHY are sensitive to power-rail noise.

USD $4,05 En stock

PIC32MZ2048EFH100T-I/PF

PIC32MZ2048EFH100T-I/PF - 200MHz, 2MB Flash MCU | Microchip

The Microchip PIC32MZ2048EFH100T-I/PF is a high-performance 32-bit MIPS32 M-Class microcontroller running at 200 MHz with 2 MB of Flash and 512 KB of SRAM, housed in a 100-pin TQFP (14x14 mm) package. It integrates a Floating Point Unit (FPU), HS USB, 10/100 Ethernet MAC, CAN 2.0b, and advanced analog peripherals, targeting connectivity-rich embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and a rich set of on-chip peripherals such as timers, communication interfaces, and ADCs. Within the embedded hierarchy it sits above simple digital logic and below full application processors: MCU -> 32-bit microcontroller -> MIPS32 architecture -> PIC32 family -> PIC32MZ EF family. The PIC32MZ EF family is engineered for connectivity applications including industrial automation, IoT gateways, graphics HMI, automotive driver assistance, and motor control. Key features include 2 MB dual-panel Live-Update Flash, 512 KB SRAM, hardware FPU for IEEE-754 single and double precision operations, a 200 MHz core / 252 MHz maximum, dedicated crypto accelerator variants, HS USB 2.0 with on-chip PHY, 10/100 Mbps Ethernet MAC with 1588 timestamps, dual CAN 2.0b controllers, SQI (Serial Quad Interface) for external serial Flash, and a 12-bit 18 MSPS ADC with up to 48 analog inputs on 100-pin packages. Debug support is provided through a 4-wire MIPS Trace port plus JTAG. Architecturally, the device uses a 5-stage MIPS32 pipeline with hardware multiply/divide and dual-issue DSP extensions. The peripheral set is interconnected via a multi-layer AHB/APB bus matrix that allows simultaneous DMA-driven I/O and CPU execution without contention, an important advantage in real-time connectivity stacks such as TCP/IP plus CAN plus USB concurrently. Typical applications include industrial IoT gateways running TCP/IP stacks, automotive infotainment and body controllers, HMI panels with graphics and touch, BLDC and PMSM motor drives with field-oriented control, and medical instrumentation requiring deterministic Ethernet or USB connectivity. The 100-pin TQFP package provides generous I/O count for multi-bus designs. When designing with this part, allocate the Live-Update Flash regions carefully: the upper panel must be programmed before the lower panel can be updated in field, and the FPU latency should be considered in interrupt service routines. The HS USB PHY requires a precise 48 MHz reference from the on-chip PLL, so external crystal selection around 12 MHz is recommended for USB-stable designs. This page synthesizes distributor pricing, drop-in alternatives within the PIC32MZ EF family, and practical design notes not collected in a single place in the manufacturer datasheet.

USD $9,47 En stock

PIC32MZ2048EFH100T-I/PT

PIC32MZ2048EFH100T-I/PT - 200MHz 2MB Flash 32-bit MCU | Microchip

The Microchip PIC32MZ2048EFH100T-I/PT is a high-performance 32-bit MIPS M-Class microcontroller featuring a 200 MHz core, 2 MB of Flash, and 512 KB of SRAM in a 100-pin TQFP (12x12 mm) package. The "T" suffix denotes Tape & Reel packaging while "I" indicates the industrial -40C to +85C temperature grade, and the part runs from a 2.3V to 3.6V supply. The part integrates a hardware floating-point unit (FPU), HS USB 2.0, 10/100 Ethernet MAC, CAN, SQI, and a 12-bit ADC targeting industrial, automotive, IoT, HMI/graphics, and motor-control applications. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory, data memory, and peripherals into one package. Within the broader taxonomy, 32-bit MCUs belong to the embedded microcontroller family, which sits beneath microprocessors and above 8-/16-bit MCUs in capability. The PIC32MZ EF family specifically targets high-performance connectivity applications where ARM Cortex-M alternatives such as STM32F4/F7 or NXP i.MX RT often compete. Choosing a 32-bit MIPS core offers deterministic interrupt latency, mature MPLAB Harmony tooling, and Microchip's MPLAB ecosystem. Key features of the PIC32MZ2048EFH100T-I/PT include 2 MB dual-bank Live-Update Flash for in-field firmware upgrades, 512 KB SRAM, the MIPS32 M-class core with FPU delivering up to 252 MHz in related variants, four I2C, four SPI, six UART, an HS USB 2.0 PHY, an integrated Ethernet MAC with RMII/MII, two CAN 2.0b modules, and a 12-bit 1.2 Msps ADC with up to 48 channels. The 100-pin TQFP package exposes rich peripheral remapping and shadow-register free context switching for deterministic real-time response. Architecturally, the PIC32MZ EF core pairs a 5-stage MIPS pipeline with a tightly-coupled prefetch module, a 4-way set-associative cache, and the MIPS DSP ASE plus the microMIPS code-density instruction set. The Live-Update dual-bank Flash and shadow register file minimize interrupt jitter, which matters in motor-control and USB audio loops. Typical applications include industrial PLC and motor-control boards, USB host/device peripherals, Ethernet-connected IoT gateways, automotive HMI clusters, and graphics/HMI TFT panels. The 100-pin TQFP footprint is a common Microchip migration target for designs starting on smaller PIC32 packages. A practical design consideration: route the HS USB DP/DM pair as a 90-ohm differential with a clean ground, keep the 12 MHz crystal traces short, and respect the 2.3V to 3.6V supply range; exceeding 3.6V will damage the device. This page synthesizes distributor pricing, drop-in alternatives from the PIC32MZ EF family, and practical design notes beyond the manufacturer datasheet.

USD $11,85 En stock

PIC32MZ2048EFH124-E/TL

PIC32MZ2048EFH124-E/TL - 32-bit MCU 200MHz 2MB Flash 124-VTLA

The Microchip Technology PIC32MZ2048EFH124-E/TL is a 32-bit MIPS32 M-Class microcontroller running up to 200 MHz with 2 MB Flash and 512 KB SRAM, housed in a 124-pin VTLA (9x9 mm) surface-mount package with exposed thermal pad. The device delivers 97 programmable I/O lines, a Hi-Speed USB 2.0 OTG controller, a 10/100 Ethernet MAC, dual CAN 2.0b ports, a Quad-SPI (SQI) flash interface, and a 12-bit 5 MSPS ADC with up to 48 input channels. What is a 32-bit MCU? A microcontroller unit (MCU) is a single-chip computer integrating a CPU core, program memory (Flash), working memory (RAM), and peripherals such as timers, ADC/DAC, communication controllers and GPIO. The PIC32MZ EF family sits in the upper-mid range of the PIC32 line: 32-bit core -> MIPS32 M-Class architecture -> 32-bit MCU -> embedded processor -> semiconductor. These parts target connectivity-rich industrial, IoT, automotive, and graphics-HMI designs where on-chip peripherals and determinism matter more than absolute MHz. Key features include an FPU, DSP enhancements, a dedicated crypto engine is intentionally absent in this variant (the part number suffix No Crypto confirms), 8 KB instruction cache, 4 KB write-back data cache, and a peripheral pin-select (PPS) matrix. The device supports up to 200 MHz CPU clock with 83 DMIPS core performance and integrates a true random number generator (TRNG), multiple I2C/SPI/UART ports, and a parallel master port for external bus expansion. The architecture uses a 5-stage pipeline MIPS32 M4K-class core with DSP ASE and hardware MAC, executing most instructions in a single cycle. Memory is partitioned with 2 MB dual-bank Flash (live update capable), 512 KB SRAM, and dedicated boot Flash. The supply rail is 3.3 V with internal LDO and on-chip voltage regulation, simplifying power-tree design across industrial 24V-derived systems. Typical applications include industrial Ethernet gateways, automotive body and HMI modules, IoT edge nodes with TLS acceleration (using the crypto engine of related EF parts), and graphical touch displays. Designers choose this device when they need 2 MB of on-chip Flash for full-featured protocol stacks plus a connectivity-rich peripheral set on a single die. When designing with the PIC32MZ2048EFH124-E/TL, respect the 124-VTLA package's thermal resistance (theta_JA approximately 19 C/W on a 4-layer JEDEC JESD51-7 9x9 cm board with thermal vias) and decouple every VDD/AVDD pair with 100 nF plus 4.7 uF bulk. Leave the exposed pad soldered to a continuous ground plane; floating the EP will elevate junction temperature and degrade ADC linearity. Use the internal FRC as backup only during development; production firmware should calibrate the POSC with the FPLL to within +/- 50 ppm for Ethernet and CAN. This page synthesizes distributor pricing, drop-in VTLA-124 alternatives, application context, and design notes not found in a single Microchip datasheet - engineered to help sourcing teams and firmware engineers shorten the design-in cycle.

USD $10,50 En stock

PIC32MZ2048EFH124-I/TL

PIC32MZ2048EFH124-I/TL - 200MHz 2MB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MZ2048EFH124-I/TL is a 32-bit MIPS32 M-Class PIC32MZ EF microcontroller integrating 2 MB of Flash and 512 KB of SRAM, operating at up to 200 MHz on a 3.3 V supply, in a 124-pin VTLA (9x9 mm) surface-mount package with an exposed thermal pad. The device is offered in the industrial -40C to +85C temperature grade and is supplied in tube packaging. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a high-throughput CPU core, on-chip Flash program memory, SRAM data memory, and a rich set of digital and analog peripherals into a single IC. The PIC32MZ EF family sits within Microchip's high-end PIC32 portfolio, targeting connectivity-rich applications. In the broader taxonomy it falls under MCU -> 32-bit MCU -> MIPS32 -> PIC32MZ EF family, designed for industrial, IoT, graphics/HMI, motor control, and automotive (with the -Q1 / -E qualified variants) markets. Key features include a hardware multiply/divide pipeline, a 12-bit ADC with up to 2 MSPS, multiple connectivity peripherals (Ethernet, CAN, USB OTG, SPI, I2C, UART), a graphics-friendly parallel master port, and 97 general-purpose I/O pins. The 2 MB Flash and 512 KB SRAM allow complex TCP/IP stacks, graphics framebuffers, and protocol buffers to be held entirely on-chip. The device supports MIPS16e code compression and a prefetch cache to maximize instruction throughput. On the architecture side, the MIPS32 M-Class core pairs a 5-stage pipeline with branch prediction and a tightly-coupled SRAM interface. The 124-pin VTLA package exposes the parallel master port (PMP) and dedicated high-speed peripherals needed for HMI displays, while the dual-row leadframe and exposed pad keep the thermal resistance low enough for full-speed industrial operation without forced airflow. Typical applications include industrial Ethernet gateways, IoT edge nodes, HMI panels, motor-control daughter boards, USB device/host bridges, and secure connected sensors. The wide Flash budget also makes it suitable for OTA (over-the-air) firmware update designs that must keep two application images resident. For a related companion solution see the PIC32MZ EF starter kit reference design, which uses this part with the Ethernet and USB segments enabled. When designing with this part, ensure the 3.3 V rail is well decoupled (1uF + 0.1uF at each VDDCORE/VDDIO pin) and that the exposed thermal pad is soldered to a continuous ground copper pour. Industrial users planning a long-lifecycle design should evaluate the AEC-Q100-qualified -E/TL temperature grade variant.

USD $9,20 En stock

PIC32MZ2048EFH124T-I/TL

PIC32MZ2048EFH124T-I/TL - 200MHz 32-Bit MCU 2MB Flash | Microchip

The Microchip PIC32MZ2048EFH124T-I/TL is a high-performance 32-bit MIPS MCU from the PIC32MZ EF family, featuring a 200 MHz/330 DMIPS MIPS Warrior M-class core with a DSP-enhanced engine, four 64-bit accumulators, single-cycle MAC, and an IEEE 754-compliant hardware Floating Point Unit (FPU). It integrates 2 MB of Flash with Dual Panel architecture for live-update support and 512 KB of SRAM, all housed in a 124-pin VTLA (9x9 mm) surface-mount package with an exposed pad. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory (Flash), data memory (SRAM), and a wide range of peripherals on one die. Within the broader taxonomy, the PIC32MZ EF family sits at the intersection of high-performance embedded connectivity and DSP-capable processing, bridging 8/16-bit MCU simplicity and application processor complexity. This class of MCU targets Industrial, Automotive (AEC-Q100 grade 1 variants exist in the family), IoT, Graphics/HMI, and Motor Control market segments where deterministic real-time performance and rich connectivity are required. Headline features include High-Speed USB 2.0 (480 Mbps), 10/100 Mbps Ethernet MAC with IEEE 1588 support, two CAN 2.0b controllers, SQI (Serial Quad Interface) for external memory, multiple UART/SPI/I2C peripherals, a 12-bit 5 MSPS ADC up to 48 channels, and advanced audio/graphics interfaces (I2S, HMI). Operating from 2.3V to 3.6V with industrial temperature range (-40 °C to +85 °C), it balances high-throughput DSP processing and low-power sleep modes (down to sub-mA standby). Architecturally, the MIPS Warrior M-class core issues up to 4 instructions per clock and pairs with a tightly-coupled FPU to accelerate floating-point DSP kernels used in audio decoding, motor control, and signal conditioning. Dual Panel Flash enables fail-safe firmware live updates - critical for Industrial IoT gateways and automotive clusters that must remain in service during firmware upgrades. Typical applications include Industrial IoT gateways with Ethernet/USB, automotive infotainment HMI, motor control (BLDC/PMSM FOC), audio processing, multi-protocol bridging (UART/CAN/SPI-to-Ethernet), and high-resolution graphics HMI. The exposed-pad VTLA-124 package requires careful PCB thermal management and a 9 x 9 mm land pattern with thermal via array to the inner ground plane. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $11,95 En stock

PIC32MZ2048EFH144

PIC32MZ2048EFH144 - 252MHz 2MB Flash MCU | Microchip

The Microchip Technology PIC32MZ2048EFH144 is a high-performance 32-bit microcontroller based on the MIPS32 M-Class core running at 200 MHz (up to 252 MHz), with 2 MB of Flash and 512 KB of SRAM in a 144-pin TQFP (16x16 mm) package. A microcontroller (MCU) is a compact integrated circuit combining a processor core, memory, and programmable I/O peripherals to govern a specific operation in an embedded system. The PIC32MZ EF family is part of Microchip's 32-bit PIC32M series, bridging the gap between 8/16-bit PICs and high-end application processors within the broader hierarchy of semiconductor -> integrated circuit -> MCU -> 32-bit MCU. Key features include a MIPS32 M-Class core with hardware floating-point unit (FPU), 2 MB Live-Update Flash for firmware updates without halting the system, and 512 KB SRAM. Peripherals include HS USB, Ethernet, CAN, UART, SPI, I2C, 48-channel 12-bit ADC, comparators, audio and graphics interfaces, plus a cryptographic engine for secure communication and DMA channels for efficient data transfer. Architecturally, the device integrates a high-speed memory bus, a five-stage pipeline, and an FPU for math-intensive tasks. The Live-Update dual-panel Flash architecture is critical for field-upgradeable industrial and IoT devices requiring zero-downtime updates. Typical applications include industrial automation controllers, automotive body electronics, IoT gateways, human-machine interfaces (HMI), and motor control systems, where high clock speed, large memory, and rich connectivity enable complex real-time control. When designing, ensure proper decoupling of power pins and a stable clock source. Multiple low-power modes are supported, but high-speed operation requires careful PCB layout to minimize noise and signal integrity issues.

USD $12,85 En stock

PIC32MZ2048EFH144-250I/JWX

PIC32MZ2048EFH144-250I/JWX - 252MHz 32-bit MCU, 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048EFH144-250I/JWX is a high-performance 32-bit microcontroller from the PIC32MZ EF family, featuring a MIPS32 M-Class core running at up to 252 MHz, 2 MB of Flash program memory and 512 KB of SRAM, housed in a 144-pin TFBGA (7x7 mm JWX) package. It integrates high-speed connectivity peripherals including USB 2.0 High-Speed, 10/100 Ethernet MAC, CAN, and a Serial Quad Interface (SQI) for external memory expansion, targeting connectivity-rich applications. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich peripheral set. The PIC32MZ EF family is positioned in Microchip's high-performance 32-bit lineup, sitting above the PIC32MX series and below the dual-core PIC64 family. Within the broader system hierarchy, an MCU sits between discrete microprocessors (which require external memory and peripherals) and System-on-Chip (SoC) devices (which add application processors and advanced multimedia blocks). Key features of this part include: an integrated FPU (Floating Point Unit) supporting IEEE 754 single and double precision; 16-bit ADC with up to 5 MSPS throughput; up to 120 MHz Peripheral Bus (PBCLK) and 200 MHz System Bus (SCLK); a crypto engine supporting AES, 3DES, SHA and MD5; and 8-channel DMA for offloading CPU transfers. Operating voltage spans 2.1 V to 3.6 V with industrial-grade -40 C to +85 C temperature range. Architecture: the part uses the MIPS microAptiv core with MPU and DSP extensions, paired with tightly coupled SRAM for deterministic interrupt response. The crypto engine and SQI interface allow secure, high-throughput external storage, while the Hi-Speed USB PHY integrated on-chip eliminates external transceiver cost on the 144-pin package. Typical applications include industrial IoT gateways, automotive HMI / graphics controllers, motor control (BLDC, FOC), medical patient monitors, smart energy metering, and connectivity hubs (BLE/Wi-Fi co-processor hosts). When designing with this MCU, allocate a 4-layer PCB with continuous ground plane for the 7x7 mm BGA fan-out, use a low-impedance decoupling network of 100 nF + 4.7 uF per VDD/VUSB rail, and verify the SQI timing budget against the chosen Flash device's load capacitance. Industrial users should also enable the watchdog timer and the MPU at boot to harden the firmware. This page synthesizes distributor pricing, drop-in alternatives, and engineering design notes not found in a single manufacturer document, sourced from DigiKey, Mouser, Microchip product page, and Hotenda as of 2026-10-04.

USD $12,60 En stock

PIC32MZ2048EFH144-250I/PH

PIC32MZ2048EFH144-250I/PH - 252MHz 32-bit FPU MCU, 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048EFH144-250I/PH is a high-performance MIPS32 M-Class 32-bit microcontroller running up to 252 MHz / 415 DMIPS, equipped with an IEEE 754-compliant Floating Point Unit, 2 MB of dual-panel Flash, and 512 KB of SRAM, housed in a 144-pin TQFP (16x16) package. It targets connectivity-rich industrial, IoT, automotive, graphics/HMI, and motor-control applications requiring high CPU throughput combined with extensive on-chip peripherals. A 32-bit MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals. Within the broader semiconductor hierarchy, MCUs sit between microprocessors (which require external memory/peripherals) and SoCs (which integrate application-specific accelerators). The MIPS M-Class Warrior core adds DSP extensions including four 64-bit accumulators, single-cycle MAC, saturating and fractional math, giving the PIC32MZ EF family signal-processing capability that rivals dedicated DSPs. Key features include an integrated FPU for fast single- and double-precision floating-point math, hardware crypto accelerators (AES, SHA, DES/3DES) for secure connectivity, Hi-Speed USB 2.0 with PHY, 10/100 Ethernet MAC with IEEE 1588 PTP support, dual CAN 2.0B modules, SQI (Serial Quad Interface) for high-speed external Flash, and a 12-bit ADC at up to 500 ksps. The dual-panel Flash architecture enables live field updates without bricking the device. Typical applications include industrial HMI panels with TFT LCD + graphics acceleration, IoT gateways with Ethernet + Wi-Fi co-existence, automotive infotainment and instrument clusters, BLDC/PMSM motor-control FOCs running at high sample rates, secure connected medical devices, and high-end audio processing with Bluetooth bridging. When designing with this part, budget for a 6-layer PCB to route the high-speed USB differential pair and Ethernet MII/RMII signals cleanly. Use the SQI interface to attach a 128-Mbit external serial Flash for data logging; this offloads the internal 2 MB program Flash for code storage while preserving fast access for read-only assets. This page synthesizes distributor pricing, drop-in alternatives from Microchip's PIC32MZ EF/EC family, and practical design notes not consolidated in the manufacturer datasheet - giving an engineer a single decision-making artifact rather than fragments scattered across DigiKey, Mouser, and the Microchip parametric search.

USD $17,20 En stock

PIC32MZ2048EFH144-E/JWX

PIC32MZ2048EFH144-E/JWX - 32-bit MCU, 2MB Flash, 200MHz, TFBGA-144

The Microchip Technology PIC32MZ2048EFH144-E/JWX is a 32-bit MIPS M-Class PIC32MZ microcontroller running up to 200 MHz with 2 MB Flash, 512 KB SRAM, FPU, USB-HS, Ethernet, CAN, and SQI, housed in a 144-pin TFBGA (7x7 mm) package. The device operates from 2.1 V to 3.6 V and targets high-performance connectivity designs across industrial, automotive, IoT, graphics (HMI), and motor-control segments. A 32-bit MCU (microcontroller) is a single-chip processor integrating a CPU core, program and data memory, and a rich set of peripherals such as timers, ADCs, communication interfaces, and security blocks. The PIC32MZ EF family sits at the top of Microchip's PIC32 portfolio and belongs to the broader category of microcontrollers (MCU) -> 32-bit microcontrollers -> embedded microcontrollers -> system-on-chip (SoC) for embedded applications. The MIPS M-Class core with hardware floating-point unit (FPU) accelerates DSP-style math common in motor control and audio processing, while the large 2 MB Flash footprint supports full TCP/IP stacks and graphical libraries onboard. Key features include 2 MB Flash program memory, 512 KB SRAM, hardware FPU, IEEE 754 single-precision floating-point acceleration, integrated 10/100 Ethernet MAC, USB 2.0 High-Speed with PHY, two CAN modules, a dedicated SQI (Serial Quad Interface) for external Flash, 12-bit ADC, and rich PWM/timer blocks for motor control. The 144-pin TFBGA package exposes 120+ GPIOs and the full peripheral set. AEC-Q100 qualification (Automotive 'E' temperature grade, -40 C to +125 C) makes the part suitable for automotive applications. Architecturally, the PIC32MZ2048EFH144 combines a 200 MHz MIPS32 M-Class core (with 5-stage pipeline) and a tightly-coupled FPU, a 32 KB I-cache / 32 KB D-cache, dedicated crypto engines (the 'H' designation), and dual-bank Flash for in-field updates. A high-bandwidth peripheral bus matrix allows Ethernet, USB-HS, and SQI traffic without starving the core. Typical applications include industrial IoT gateways, automotive HMI clusters, motor-control inverters, graphics-touch HMI panels, and Bluetooth/wireless audio platforms (the device is supported by Microchip Bluetooth Audio Development Kit MA320018 PIM). For graphic HMIs, pair with the SSD1963 controller or use the integrated graphics controller through external interfaces. When designing with this MCU, prioritize PCB layout for the 7x7 mm BGA: keep trace lengths matched for USB-HS and Ethernet differential pairs (90-ohm impedance), and provide at least four 100 nF decoupling capacitors near the power pins. Plan for an external 24 MHz primary oscillator and a 32.768 kHz secondary for RTC. The 'E' temperature suffix means -40 C to +125 C; use the 'I' grade part for non-automotive industrial at the same speed. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $8,95 En stock

PIC32MZ2048EFH144-E/PL

PIC32MZ2048EFH144-E/PL - 32-Bit MCU, 2MB Flash, 144-LQFP | Microchip

The Microchip Technology PIC32MZ2048EFH144-E/PL is a high-performance 32-bit MIPS M-Class microcontroller from the PIC32MZ EF family, integrating up to 2 MB of Flash program memory and 512 KB of SRAM in a 144-pin LQFP (20x20 mm) industrial-grade package. It runs up to 252 MHz (the E/PL industrial grade is screened for 180 MHz operation per the published DigiKey/Mouser listings), delivers a MIPS32 M-Class core with single-cycle MAC and hardware FPU, and provides a rich connectivity peripheral set including HS USB, 10/100 Ethernet MAC, CAN 2.0, SQI, multiple UART/SPI/I2C, 16-bit DMA, and a 48-channel 12-bit ADC. A 32-bit microcontroller (MCU) is a single-chip processor that executes 32-bit instructions in a single cycle and integrates Flash, SRAM, and peripherals on one die. Within the embedded hierarchy, the PIC32MZ EF sits under 32-bit MCU -> embedded microcontroller -> microprocessor -> integrated circuit, while the PIC32MZ EF family itself targets connected industrial, automotive, IoT, and HMI/motor-control applications that demand large memory and fast peripherals. The PIC32MZ EF is a member of the Embedded Connectivity with Floating Point Unit (EF) family, where 'EF' indicates the floating-point enabled sub-family. Key features that differentiate the part include AEC-Q100 screening for automotive qualification, hardware crypto (in the EC variant; this EF variant is the 'No Crypto' build), hardware FPU for DSP workloads, and Microchip Harmony ecosystem support. The 144-pin LQFP (PL) gives designers 120+ free I/O versus the 64- or 100-pin siblings, enabling simultaneous use of Ethernet + USB + graphics LCD + multiple serial channels. Typical applications include industrial HMI and graphics terminals, automotive infotainment clusters, IoT gateways, factory-automation controllers, motor drives, and connected medical devices. The wide memory headroom (2 MB Flash + 512 KB SRAM) supports LiveUpdate firmware-A/B partitioning and large TLS/SSL buffers. When designing with this device, ensure the 2.1-3.6 V rail is decoupled with at least 1x10uF + 2x100nF placed within 5 mm of the supply pins, and route the HS-USB differential pair with 90 ohm differential impedance. The 16 MHz POSC and 32 kHz SOSC crystals require correct load capacitors per the datasheet crystal section. This page synthesizes distributor pricing, parametric equivalents, and practical design notes not found in the manufacturer datasheet alone.

USD $14,95 En stock

PIC32MZ2048EFH144-I/PH

PIC32MZ2048EFH144-I/PH - 200MHz 32-Bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048EFH144-I/PH is a 32-bit MIPS32 M-Class PIC32MZ EF microcontroller running at up to 200 MHz with 2 MB of Flash and 512 KB of SRAM in a 144-pin TQFP (16x16 mm) package. It integrates a hardware floating-point unit, HS USB, 10/100 Ethernet MAC, CAN, and advanced analog peripherals targeting connectivity, graphics, motor-control, and IoT-edge applications. A microcontroller (MCU) is a self-contained computer on a single chip that combines a CPU core, program memory (Flash), data memory (SRAM), and configurable peripherals such as timers, serial interfaces, and analog-to-digital converters. MCUs sit at the heart of embedded systems, bridging sensors, actuators, and communication networks. Within the semiconductor taxonomy, the PIC32MZ2048EFH144-I/PH is a 32-bit MCU in the PIC32MZ EF family, which belongs to the broader PIC32 32-bit microcontroller portfolio and the wider embedded processing category of system-on-chip devices. Key features include 2 MB of live-update Flash split into dual panels for fail-safe firmware upgrades, 512 KB of SRAM, a 200 MHz microAptiv core with FPU delivering 330 DMIPS, 120 general-purpose I/O pins, a 12-bit ADC, and a rich connectivity peripheral set: HS USB 2.0 host/device, 10/100 Ethernet MAC with RMII, two CAN 2.0b modules, SQI, and multiple UART/SPI/I2C. The 144-pin TQFP provides an exposed thermal pad and 0.4 mm pitch suitable for conventional SMT lines. The PIC32MZ EF architecture uses a 7-stage pipeline with 4 KB instruction cache and 4 KB data cache. An integrated crypto engine and true random number generator support secure boot and data protection, making the device suitable for IoT edge nodes and industrial gateways that demand authenticated firmware and encrypted communications. Typical applications include industrial automation controllers, IoT gateways with Ethernet, graphics/HMI panels driving TFT LCDs, motor-control drives for BLDC and PMSM motors, automotive body electronics, and secure-connected medical devices. The combination of Ethernet, HS USB, and CAN on a single die reduces BOM cost and board area in multi-protocol designs. When designing with this device, observe the 3.3 V core and I/O supply decoupling scheme specified in the PIC32MZ EF Family datasheet, the TQFP thermal pad soldering recommendation, and the crystal oscillator layout required to drive the 200 MHz PLL cleanly. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $12,84 En stock

PIC32MZ2048EFH144T-250I/JWX

PIC32MZ2048EFH144T-250I/JWX - 32-Bit 252MHz 2MB Flash MCU | Microchip

The Microchip Technology PIC32MZ2048EFH144T-250I/JWX is a 32-bit MIPS32 M-Class microcontroller running up to 252 MHz core clock, integrating 2 MB of Flash and 512 KB of SRAM, and housed in a 144-pin TFBGA (7x7 mm) package. It belongs to the PIC32MZ EF family of high-performance MCUs and targets connectivity-rich applications in industrial, automotive, IoT, HMI/graphics and motor-control market segments. What is a PIC32 MCU? PIC32 microcontrollers are 32-bit MIPS-based devices from Microchip Technology (formerly MIPS) that combine the simplicity of an MPU programming model with microcontroller-grade peripherals. Within Microchip's portfolio, the PIC32MZ EF family sits at the top of the PIC32 line, between the mainstream PIC32MX family and the higher-end SAME70/SAMS70 ARM Cortex-M7 parts. They are widely deployed in connectivity (USB-HS, Ethernet, CAN), graphics/HMI, and motor-control designs that need large Flash and RAM budgets. Key features of the PIC32MZ2048EFH144T-250I/JWX include a single MIPS32 M-Class core with hardware FPU, 252 MHz maximum operating frequency, 2 MB Flash (2M x 8), 512 KB SRAM, dedicated USB-HS, ENET (10/100 Ethernet MAC), CAN, SQI (Serial Quad Interface), and a rich analog/digital peripheral set (multiple timers, ADC channels, and communication interfaces). The 144-TFBGA 7x7 mm package provides a compact footprint suitable for space-constrained embedded modules. The architecture uses a 5-stage pipeline MIPS32 core with DSP extensions and a single-precision hardware FPU, achieving 252 MHz / 3.3 MIPS per MHz performance. The 2 MB Flash and 512 KB SRAM enable large protocol stacks, graphics framebuffers, and over-the-air update images. High-speed connectivity peripherals (USB-HS, ENET, SQI, CAN) make the device suitable for industrial communication nodes and connected HMI panels. Typical applications include industrial Ethernet gateways and PLC communication modules, USB-HS peripherals and HMI graphics terminals, automotive body/infotainment subsystems, IoT edge controllers with secure connectivity, and BLDC/PMSM motor-control servo drives. Designers often pair this MCU with external PHY transceivers, isolated CAN drivers, and TFT LCD controllers for full HMI solutions. When designing with this device, plan PCB layout for the 0.5 mm pitch TFBGA: route fan-out with micro-vias, use 4+ layer stack-up, and provide a continuous GND plane under the BGA. Match the 144-pin TFBGA footprint if you consider migration to the EF family variants (such as PIC32MZ1024EFH144 or PIC32MZ0512EFK144) so that one PCB can host multiple memory/speed options. This page synthesizes distributor pricing, drop-in alternatives and practical layout notes not found in the manufacturer datasheet, with content tailored for component engineers evaluating PIC32MZ EF family selection.

USD $18,40 En stock

PIC32MZ2048EFH144T-250I/PH

PIC32MZ2048EFH144T-250I/PH - 252MHz 32-bit MCU, 2MB Flash | Microchip

The Microchip PIC32MZ2048EFH144T-250I/PH is a 32-bit MIPS32 M-Class microcontroller running up to 252 MHz (415 DMIPS), with 2 MB Flash and 512 KB SRAM in a 144-pin TQFP (16x16 mm) package. It integrates a hardware Floating Point Unit (FPU), four 64-bit accumulators with single-cycle MAC, saturating and fractional math, and IEEE 754 compliance for DSP-grade signal processing. A 32-bit microcontroller (MCU) is an embedded processor that executes instructions over a 32-bit datapath and addresses a linear memory space of typically >4 GB. Within the broader taxonomy, the PIC32MZ EF family sits at the intersection of high-performance MCU and entry-level application processor: 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. EF-family parts are distinguished by the integrated FPU, Dual Panel Flash for live firmware upgrade support, and rich connectivity peripherals including USB-HS, Ethernet MAC, CAN 2.0B, and SQI. Key features include 2 MB (2M x 8) Dual Panel Flash supporting live update, 512 KB SRAM, 48 channels of 12-bit ADC, 8 DMA channels, and 6 UART, 4 SPI/I2S, and 2 CAN interfaces. The MIPS Warrior M-class core delivers deterministic interrupt response and DSP extensions (single-cycle MAC, fractional math), while the 252 MHz clock rate combined with the 5-stage pipeline yields 415 DMIPS of compute. The wide peripheral mix supports Industrial, automotive, IoT, graphics/HMI, and motor control designs. The device operates from 2.3V to 3.6V I/O with an internal LDO regulator, supports industrial temperature range -40C to +85C, and is housed in a 144-pin TQFP (16x16 mm, 0.4 mm pitch) for moderate-density PCB designs. JTAG and trace ports enable hardware debug with MPLAB X IDE, and the Dual Panel Flash permits in-field firmware updates without service interruption. Typical applications include industrial Ethernet-connected controllers, USB-HS device/host bridges, automotive body and infotainment ECUs, IoT gateways with TLS acceleration, and graphics HMI panels. Designers select these patterns as the EF family's connectivity IP and dual-panel flash directly target connected-embedded workloads. When designing with this device, ensure the 3.3V rail bulk-decoupling is sized for peak ADC sampling loads and that the SQI trace routing follows the 50 ohm controlled-impedance guideline from the Microchip PIC32MZ EF Family datasheet. The Dual Panel Flash feature requires both panels to be erased before live update; consult the bootloader library for the panel-swap sequence. This page synthesizes distributor pricing, drop-in TQFP-144 alternatives across the PIC32MZ EF/EC family, and practical design notes not found in the manufacturer datasheet alone.

USD $12,75 En stock

Productos (18688)