PIC24EP64MC206T-E/PT - 16-bit 60 MIPS 64KB Flash Motor MCU
N.º de pieza: PIC24EP64MC206T-E/PT ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $6.85 | $6,85 |
| 10 | $6.25 | $62,50 |
| 100 | $5.45 | $545,00 |
| 500 | $4.92 | $2.460,00 |
| 1.000 | $4.3 | $4.300,00 |
PIC24EP64MC206T-E/PT Descripción general
A PIC (Peripheral Interface Controller) microcontroller is a family of flash-programmable Harvard-architecture microcontrollers built around a 16-bit modified-RISC core. Within the semiconductor hierarchy, a PIC24EP falls under the broader category of 16-bit MCUs -> microcontrollers -> embedded processors -> semiconductors. The 'EP' designation indicates the Enhanced Performance family with a 16-bit data path, single-cycle hardware MAC (multiply-accumulate) for DSP operations, and the dsPIC33E instruction set extension that enables efficient digital signal processing without external DSP chips.
Key features include high-speed PWM (12.5 ns resolution), nine 16-bit timers, four 32-bit timers, and advanced motor control peripherals such as Quadrature Encoder Interface (QEI) and High-Speed Analog Comparator. Communication interfaces include I2C, SPI, UART/USART, IrDA, LINbus, and USB OTG. The device supports 53 general-purpose I/O pins with 5V-tolerant inputs, and integrates a 10-bit ADC with up to 1.1 Msps conversion rate.
The PIC24EP64MC206 uses a 3.3V supply (3.0V to 3.6V operating range), features an enhanced middle-stage pipeline for deterministic interrupt response, and supports multiple low-power modes including Idle, Sleep, and Deep Sleep for energy-efficient operation. Its deterministic instruction execution and rich peripheral set make it ideal for hard real-time control applications.
Typical applications include three-phase BLDC and PMSM motor control, sensorless Field-Oriented Control (FOC) drives, industrial servo systems, and automotive body electronics. The high-resolution PWM and QEI make it equally suited for closed-loop stepper and DC motor drives.
When designing with this MCU, pay attention to decoupling: place 100 nF ceramic capacitors as close as possible to each VDD/VSS pair, add a bulk 10 uF capacitor near the analog supply pins (AVDD), and ensure the 32 kHz low-power crystal layout (if used) follows Microchip AN1799 to minimize current consumption drift.
This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet, helping procurement and engineering teams accelerate their motor control design.
Alternativas directas para PIC24EP64MC206T-E/PT — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con PIC24EP64MC206T-E/PT (mismo factor de forma y huella) — difiere en Package, ADC, Operating Temperature, Core Architecture, Maximum CPU Speed.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
PIC24EP64MC206-E/PT
✅ Sustitución directa✓ En stock
$5.71 / unidad
Ver hoja de datos →PIC24EP128MC206-E/PT
✅ Sustitución directa✓ En stock
$5.45 / unidad
Ver hoja de datos →PIC24EP256MC206-E/PT
✅ Sustitución directa✓ En stock
$6.55 / unidad
Ver hoja de datos →PIC24EP512MC206-E/PT
✅ Sustitución directa✓ En stock
$8.55 / unidad
Ver hoja de datos →PIC24EP64GP206-I/PT
✅ Sustitución directa✓ En stock
$3.8 / unidad
Ver hoja de datos →PIC24EP64MC206T-E/PT Valores máximos y características eléctricas
| Core | PIC 16-bit, PIC24E |
| Ancho del bus de datos | 16-bit |
| CPU Speed | 60 MIPS |
| Clock Frequency | 60 MHz (max) |
| Program Memory | 64 KB Flash (22K x 24) |
| RAM | 4 KB |
| Tensión de alimentación | 3.0 V to 3.6 V |
| Temperatura de funcionamiento | -40C to +125C (E suffix) |
| I/O Pins | 53 |
| Encapsulado | 64-pin TQFP (10x10 mm, PT) |
| Tipo de montaje | Surface Mount |
| Packaging | Tape & Reel (T suffix) |
| Connectivity | I2C, SPI, UART/USART, IrDA, LINbus, USB OTG, QEI |
| ADC | 10-bit, 1.1 Msps |
| PWM Resolution | High-Speed PWM, 12.5 ns |
| Timers | 9x 16-bit, 4x 32-bit |
| Automotive Qualification | AEC-Q100 (E suffix) |
| ROM Type | Flash |
| Nivel MSL | MSL3 |
| Estado RoHS | Compliant |
Guía de configuración de pines de PIC24EP64MC206T-E/PT 64-pin tqfp (10x10 mm, pt)
Configuración de pines para PIC24EP64MC206T-E/PT (encapsulado 64-pin tqfp (10x10 mm, pt)). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para PIC24EP64MC206T-E/PT.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
PIC24EP64MC206T-E/PT es adecuado para 6 aplicacións: Three-Phase BLDC Motor Control, Industrial Servo Motor Drives, Automotive Body Electronics, Sensorless Field-Oriented Control (FOC), DC-DC Converter with Digital Control, Robotics and Drone Motor Controllers.
Three-Phase BLDC Motor Control
The PIC24EP64MC206T-E/PT's High-Speed PWM (12.5 ns resolution) and dedicated Quadrature Encoder Interface make it ideal for three-phase BLDC and PMSM motor control. Its 60 MIPS CPU executes six-step commutation at >100 kHz PWM frequency with full PID loop closure, and the integrated 10-bit ADC at 1.1 Msps samples phase currents fast enough for field-oriented control. Compared to a discrete MCU + gate driver solution, this single-chip approach reduces PCB area by ~40% and eliminates SPI communication latency between controller and driver. The AEC-Q100 grade and -40C to +125C range support automotive HVAC blowers, electric water pumps, and fuel pumps.
Recomendado
Industrial Servo Motor Drives
For industrial servo drives, the PIC24EP64MC206T-E/PT integrates QEI (Quadrature Encoder Interface) for absolute position feedback, 32-bit timers for high-resolution velocity loops, and 5V-tolerant GPIO for direct interface with industrial 24V encoder signals (via external level shifters). The 60 MIPS core runs cascaded position-velocity-current control loops at 8 kHz, which is sufficient for CNC spindle drives and robotic joints. AEC-Q100 qualification allows use in factory automation equipment that may experience extended thermal stress. The 64 KB Flash supports field-upgradeable firmware for parameter auto-tuning algorithms.
Recomendado
Automotive Body Electronics
The PIC24EP64MC206T-E/PT's AEC-Q100 qualification and -40C to +125C operating range make it well-suited for automotive body electronics including seat adjusters, power window lifts, sunroof controllers, and electric tailgates. The integrated LINbus interface allows direct connection to automotive LIN networks without external transceivers. The 4 KB RAM and 64 KB Flash accommodate complex state machines for safety functions such as anti-pinch detection in window lifter applications. USB OTG support enables diagnostic and firmware-update interfaces through the OBD-II port.
Recomendado
Sensorless Field-Oriented Control (FOC)
For sensorless FOC motor drives, the PIC24EP64MC206T-E/PT executes sliding-mode observer and Luenberger observer algorithms for rotor position estimation at the 60 MIPS instruction budget. The 12.5 ns PWM resolution combined with 1.1 Msps ADC sampling enables sub-microsecond back-EMF measurement during PWM off-time, achieving smooth low-speed torque in sensorless PMSM drives. Software packages such as Microchip's AN1078 (sensorless FOC for dsPIC) are portable to the PIC24EP family with minor register updates, reducing time-to-market for sensorless pump and fan motor designs.
Recomendado
DC-DC Converter with Digital Control
The PIC24EP64MC206T-E/PT can implement digitally-controlled DC-DC converters for telecom and industrial power supplies, with its 60 MIPS core executing digital peak current mode control at 500 kHz switching frequency. The High-Speed PWM generates 12.5 ns resolution drive signals for synchronous MOSFETs, while the 1.1 Msps ADC samples inductor current and output voltage for fast transient response. Integrated I2C and SPI interfaces enable PMBus-compatible digital power management, allowing remote telemetry of voltage, current, and temperature. The AEC-Q100 grade extends deployment to automotive 48V mild-hybrid systems.
Recomendado
Robotics and Drone Motor Controllers
The PIC24EP64MC206T-E/PT's small 64-pin TQFP footprint, low power consumption, and rich peripheral set make it suitable for robotics and small drone BLDC motor controllers. The high PWM resolution enables ultra-smooth motor commutation critical for camera gimbals and drone propellers where vibration translates directly to image quality and flight stability. The integrated USB OTG allows firmware updates and telemetry over USB for in-the-field tuning. Combined with the small code footprint and deterministic interrupt response, it provides a reliable motor control solution in weight- and space-constrained applications.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para PIC24EP64MC206T-E/PT — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | PIC24EP64MC206-E/PT | PIC24EP128MC206-E/PT | PIC24EP256MC206-E/PT | PIC24EP512MC206-E/PT | PIC24EP64GP206-I/PT |
|---|---|---|---|---|---|---|
| Package | 64-pin TQFP (PT) | 64-pin TQFP (PT) - same | 64-pin TQFP (PT) - same | 64-pin TQFP (PT) - same | 64-pin TQFP (PT) - same | 64-pin TQFP (PT) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core / CPU Speed | PIC24E, 60 MIPS | PIC24E, 60 MIPS | PIC24E, 60 MIPS | PIC24E, 60 MIPS | PIC24E, 60 MIPS | PIC24EP, 70 MIPS |
| Program Memory (Flash) | 64 KB | 64 KB | 128 KB | 256 KB | 512 KB | 64 KB |
| RAM | 4 KB | 4 KB | 8 KB | 16 KB | 48 KB | 8 KB |
| Operating Temperature | -40C to +125C (E) | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +85C (I) |
| Automotive Qualification | AEC-Q100 | AEC-Q100 | AEC-Q100 | AEC-Q100 | AEC-Q100 | Industrial only |
| High-Speed PWM | Yes (12.5 ns) | Yes (12.5 ns) | Yes (12.5 ns) | Yes (12.5 ns) | Yes (12.5 ns) | Standard PWM only |
| USB OTG | Yes | Yes | Yes | Yes | Yes | No |
| QEI (Quadrature Encoder) | Yes | Yes | Yes | Yes | Yes | No |
Diferenciadores clave
- Extended temperature grade + AEC-Q100 automotive qualification (frente a PIC24EP64GP206-I/PT)
- Integrated High-Speed PWM with 12.5 ns resolution (frente a PIC24EP64GP206-I/PT)
- Quadrature Encoder Interface (QEI) for closed-loop position control (frente a PIC24EP64GP206-I/PT)
- Higher Flash density within same package footprint (frente a PIC24EP32MC204T-E/PT (32-pin QFN))
Notas de diseño
Decoupling is critical for PIC24EP64MC206T-E/PT reliable operation. Place a 100 nF ceramic capacitor on each of the 4 VDD/3 VSS pin pairs (pins 16/17, 38/39, 56/57, 64/1 per package outline), positioned within 3 mm of each pin pair with vias connecting to a continuous ground plane. Add a single 10 uF bulk ceramic (X7R) capacitor near the analog AVDD pin to provide ADC reference stability. Without proper decoupling, the MCU is susceptible to brown-out resets during high-speed PWM switching.
PCB layout for the PIC24EP64MC206T-E/PT should follow Microchip AN1799 high-speed layout guidelines. Place the 64-pin TQFP with a continuous ground plane on layer 2, route high-speed PWM signals (PWM1H/L through PWM3H/L) on the top layer with controlled impedance to minimize ringing, and keep analog inputs (AN0-AN32) separated from digital switching signals by at least 5 mm or a guard trace connected to ground. The crystal traces (OSC1/OSC2) should be short, symmetric, and surrounded by ground pour to prevent oscillator jitter.
Common pitfalls when designing with PIC24EP64MC206T-E/PT: (1) Forgetting to configure the PPS (Peripheral Pin Select) registers - all digital I/O functions except basic GPIO require PPS mapping on PIC24E. (2) Confusing -E (Extended -40C to +125C) with -I (Industrial -40C to +85C) when sourcing for automotive - the -E suffix is required for AEC-Q100. (3) MCLR pin must have a 10 kohm pull-up to VDD; floating MCLR causes intermittent resets. (4) The FICD (Flash IC Disable) bits if misconfigured can permanently lock the device - always set them via ICSP rather than in firmware.
Información de cumplimiento
AEC-Q100 qualified per Microchip product page. RoHS compliant. Lead-free (Pb-free) per datasheet marking. Halogen-free status not explicitly stated in available data - set to unknown. Conflict-minerals compliant per Microchip standard declarations.
