Microcontrôleurs

Produits (19 000+)

STM32L451RET6 - Ultra-Low-Power Cortex-M4 MCU 512KB Flash | STMicroelectronics
STM32L451RET6

STM32L451RET6 - Ultra-Low-Power Cortex-M4 MCU 512KB Flash | STMicroelectronics

The STM32L451RET6 is an ultra-low-power 32-bit microcontroller from STMicroelectronics, based on the high-performance Arm® Cortex®-M4 32-bit RISC core with floating-point unit (FPU). It operates at a frequency of up to 80 MHz, delivering 100 DMIPS, and is designed for a wide range of battery-powered and energy-efficient applications. The device features 512 KB of Flash memory and 160 KB of SRAM, providing ample storage and execution space for complex firmware. It is housed in a 64-pin LQFP package (10x10 mm), making it suitable for space-constrained designs. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals. The STM32L451RET6 belongs to the STM32L4 series, which is part of the broader STM32 family of 32-bit microcontrollers. This series is optimized for ultra-low-power consumption, making it ideal for IoT devices, wearables, and industrial sensors. The Cortex-M4 core with FPU enhances performance for digital signal processing (DSP) tasks, while the rich set of analog and digital peripherals enables versatile system integration. Key features of the STM32L451RET6 include a 12-bit ADC with 5 MSPS, two 12-bit DACs, an operational amplifier, a comparator, and a digital filter for sigma-delta modulators (DFSDM). It also supports multiple communication interfaces: I2C, SPI, USART, UART, LPUART, SAI, and CAN. The device integrates a real-time clock (RTC), several timers, and a true random number generator (TRNG). Its ultra-low-power modes, including Sleep, Low-power run, Low-power sleep, Stop 0/1/2, and Standby, allow designers to minimize energy consumption in battery-operated systems. From a technical perspective, the STM32L451RET6 is built on a 40 nm process technology, which contributes to its low power consumption. It operates from a 1.71 V to 3.6 V power supply, and its GPIOs are 5V-tolerant, simplifying interfacing with legacy logic. The device includes a memory protection unit (MPU) and a hardware cryptographic accelerator (AES) for secure applications. The flexible power management with multiple voltage scaling options (Range 1, 2, and 3) allows the core to run at lower voltages to save power when performance is not critical. Typical applications for the STM32L451RET6 include smart meters, medical devices, industrial sensors, portable instrumentation, and IoT edge nodes. Its combination of low power, high performance, and rich analog peripherals makes it a preferred choice for applications requiring long battery life and precise analog measurements. For example, in a smart meter, the MCU can handle metering calculations, communication protocols, and display control while consuming minimal power in standby mode. When designing with this MCU, it is essential to pay attention to the power supply decoupling: place a 100 nF capacitor close to each VDD pin and a 4.7 uF capacitor at the main power input. Additionally, the VDDA pin must be connected to a clean analog supply, and the VREF+ pin should be decoupled with a 1 uF capacitor for accurate ADC conversions. Proper layout of the crystal oscillator (if used) is critical for reliable clock operation.

Devis Contact
STM32L451VCI6 - 80MHz 256KB MCU for IoT | STMicroelectronics
STM32L451VCI6

STM32L451VCI6 - 80MHz 256KB MCU for IoT | STMicroelectronics

STMicroelectronics STM32L451VCI6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with FPU, operating up to 80 MHz, with 256 KB of Flash memory, in a 100-UFBGA 7 x 7 mm package. The STM32L4 family combines a high-performance Cortex-M4 processor with up to 100 DMIPS and a strong focus on energy-efficient embedded control. An ultra-low-power microcontroller is a semiconductor designed to perform computing and control tasks while minimizing energy consumption during active operation, sleep, and standby periods. The STM32L4 family belongs to the embedded MCU hierarchy, combining an Arm Cortex-M4 processor core, embedded Flash, SRAM, analog peripherals, communications interfaces, and low-power management in one device. This integration reduces component count and supports compact, energy-conscious embedded systems. Key device attributes include an Arm Cortex-M4 core with FPU, 80 MHz maximum operating frequency, 256 KB of embedded Flash, and a 100-UFBGA package measuring 7 x 7 mm. The family-level datasheet identifies performance up to 100 DMIPS and device options up to 512 KB of Flash and 160 KB of SRAM. Analog and audio capabilities make the STM32L451 series relevant to low-power sensing, industrial control, connected equipment, and embedded audio designs. The Cortex-M4 architecture provides 32-bit processing and a floating-point unit for control loops and signal-processing tasks. Its 80 MHz operating rate gives applications more compute headroom than lower-frequency Cortex-M devices while the ultra-low-power design target supports battery-operated and duty-cycled products. The exact SRAM, peripheral complement, voltage range, and power figures for this ordering code require confirmation from the manufacturer ordering information. Typical applications include connected sensor nodes, industrial monitoring equipment, low-power instrumentation, digital audio control, and compact embedded control systems. Designers can use the Cortex-M4 core for protocol handling, real-time control, and peripheral coordination, while the family’s analog and audio features support mixed-signal products that require both computation and signal acquisition. A critical design consideration is package-level planning. The STM32L451VCI6 uses a compact 100-UFBGA footprint with fine-pitch balls, requiring a PCB with suitable solder mask, pad, and assembly-process capability. Designers should also verify the exact GPIO assignments, power pins, decoupling requirements, and peripheral multiplexing against the manufacturer datasheet before schematic capture or PCB release.

Devis Contact
STM32L451VEI6 - 80MHz 512KB Cortex-M4 MCU | STMicroelectronics
STM32L451VEI6

STM32L451VEI6 - 80MHz 512KB Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32L451VEI6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with a floating-point unit, operating up to 80 MHz and providing 512 KB of Flash memory and 160 KB of SRAM. The device is supplied in a 100-pin UFBGA package measuring 7 mm by 7 mm. Its combination of fast Cortex-M4 processing, analog peripherals, audio support, and low-power design makes it suitable for energy-sensitive embedded systems, connected sensors, industrial controls, and portable instruments. A microcontroller such as the STM32L451VEI6 integrates a processor core, memory, communication peripherals, analog interfaces, timers, and GPIO into one compact device. The STM32L4 family belongs to the broader embedded-controller hierarchy: Cortex-M4 processor core, 32-bit microcontroller, embedded semiconductor, and electronic control system. This integration reduces component count and allows firmware to coordinate sensing, control, communications, and real-time timing in one controller. The verified manufacturer information identifies an Arm Cortex-M4 32-bit RISC core, up to 80 MHz operation, 512 KB of Flash, and 160 KB of SRAM. The device also supports digital filtering and analog features identified by the manufacturer as DFSDM, analog, and audio capabilities. These resources support mixed-signal designs where a low-power MCU must acquire sensor data, perform signal conditioning, and communicate results without relying on a separate processor. The STM32L451VEI6 is positioned for embedded applications requiring more processing performance than a basic low-power MCU while retaining a compact package and energy-conscious architecture. Its Cortex-M4 core supports general-purpose control, communications, and floating-point-oriented workloads, while the integrated analog and audio peripherals can reduce system complexity. Exact peripheral assignments, voltage limits, current consumption, package pin functions, and production lifecycle details must be confirmed in the STMicroelectronics datasheet before final design release. Typical applications include industrial sensor nodes, low-power data loggers, connected measurement equipment, portable medical or diagnostic instruments, motor and actuator controllers, and compact IoT gateways. The 80 MHz core is useful for protocol handling, sampling workflows, control loops, and user-interface logic. Selection should begin with the required memory map, package footprint, peripheral set, operating voltage, clock tree, and low-power target. For PCB implementation, use the manufacturer package drawing and land pattern for the 100-UFBGA package rather than a generic BGA footprint. Confirm ball assignments, exposed-pad requirements, decoupling, power routing, and programming access in the datasheet. Also verify startup, clock, reset, and firmware-library support before committing the design to volume production. This product page combines verified manufacturer and distributor information, application-oriented engineering guidance, procurement context, and strict data-gap markers for specifications not present in the supplied sources. It is intended to support early component selection and sourcing, not to replace the complete STMicroelectronics reference documentation.

Devis Contact
STM32L452RET6 - Ultra-Low-Power Cortex-M4 MCU 80MHz 512KB | ST
STM32L452RET6

STM32L452RET6 - Ultra-Low-Power Cortex-M4 MCU 80MHz 512KB | ST

The STMicroelectronics STM32L452RET6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M4 core with FPU, operating at up to 80 MHz with 512 KB of Flash and 160 KB of SRAM in a 64-pin LQFP (10x10 mm) package. It features a wide 1.71 V to 3.6 V supply range, USB Device, DFSDM, and integrated SMPS support, while consuming as little as 22 nA in Shutdown mode and 145 nA in VBAT mode. What is an ultra-low-power ARM Cortex-M4 microcontroller? It is a 32-bit processor core designed for embedded systems that balances computational performance with exceptionally low energy consumption. The Cortex-M4 includes a single-precision floating-point unit (FPU) and DSP extensions, enabling efficient math-intensive workloads. In the system hierarchy, a microcontroller (MCU) is a complete computer-on-a-chip integrating CPU, memory, and peripherals, and belongs to the embedded processor category within the broader semiconductor landscape. The STM32L4 series specifically targets energy-constrained applications, extending battery life in portable, wearable, and IoT devices. Key features of the STM32L452RET6 include seven low-power modes (Sleep, Low-power run, Low-power sleep, Stop 0/1/2, Standby, Shutdown), a 12-bit ADC with hardware oversampling, a 12-bit DAC, two comparators, and an operational amplifier. The device also integrates a true random number generator (TRNG), AES-256 hardware crypto accelerator, secure firmware install, and a 96-bit unique ID. Communication interfaces include USB 2.0 Full-Speed Device, three USARTs, two UARTs, three I2C, three SPI, one CAN, and one SDMMC. Technically, the STM32L452RET6 is built on a low-leakage 90 nm process and supports up to 100 DMIPS / 273 CoreMark. The integrated SMPS step-down converter generates the core voltage internally, further reducing active current. A flexible memory protection unit (MPU), FSMC external memory controller, and Quad-SPI (in higher-density siblings) support external memories. The device operates across -40 C to +85 C (or +125 C with the '6' high-temp suffix variant). Typical applications include industrial sensors, smart meters, healthcare devices, wearable electronics, asset trackers, and IoT endpoints. Its combination of ultra-low quiescent current, Cortex-M4 DSP performance, and rich analog peripherals makes it ideal for battery-powered metering, medical wearables, and remote sensor nodes. When designing, leverage Stop 2 mode with RTC for periodic wake-up duty cycles, place 100 nF decoupling on every VDD/VSS pair, and use STM32CubeMX + STM32CubeIDE for clock tree configuration, peripheral init, and power-mode tuning. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Devis Contact
STM32L452RET6P - 80MHz Cortex-M4 MCU, 512KB Flash | STMicroelectronics
STM32L452RET6P

STM32L452RET6P - 80MHz Cortex-M4 MCU, 512KB Flash | STMicroelectronics

The STMicroelectronics STM32L452RET6P is an ultra-low-power Arm Cortex-M4 32-bit microcontroller plus FPU, operating at up to 80 MHz with 100 DMIPS, integrating 512 KB of Flash and 160 KB of SRAM in a 64-pin LQFP (10x10 mm) package. It supports a 1.71 V to 3.6 V supply and is offered in -40 C to 85/125 C temperature grades for industrial and portable designs. An ultra-low-power MCU (ULP-MCU) is a microcontroller class engineered to minimise active and standby energy consumption through FlexPowerControl, multiple low-power modes (Shutdown, Standby, Stop, VBAT), and fast wakeup times. The STM32L4 family sits in ST's low-power hierarchy as Cortex-M4F -> STM32L4 series -> ultra-low-power MCU -> 32-bit microcontroller -> embedded MCU, balancing DSP capability, analog integration and energy efficiency for battery-powered edge devices. Key features include: Cortex-M4 with FPU and 100 DMIPS throughput; 512 KB single-bank Flash plus 160 KB SRAM; integrated SMPS step-down converter for core supply; USB 2.0 Full-Speed Device with embedded PHY and dedicated DFS (dedicated oscillator); two 12-bit ADCs, two 12-bit DACs, two op-amps and two comparators; rich connectivity including CAN 2.0B, two I2C, three SPI, four USART, two UART and one LPUART; plus 8x40 (4x40-segment) LCD driver and AES-256 hardware encryption. Shutdown current is 22 nA (5 wakeup pins), VBAT mode draws 145 nA, and Stop mode with RTC reaches about 1.1 uA typical. The device integrates a Cortex-M4F core with single-precision FPU, MPU and DSP extensions, plus ST's proprietary ART Accelerator for zero-wait-state Flash execution at full 80 MHz. Embedded SMPS, low-power voltage regulator, and independent RTC supply domain are partitioned to support advanced run/sleep/shutdown state machines without losing backup registers. Typical applications are fitness/wearable sensor hubs, smart-meter and asset-tracking endpoints, industrial sensor nodes, medical wearables, low-power PC peripherals with USB, audio playback paths leveraging the on-chip DFSDM and SAI, and home appliances with LCD display panels. When designing with STM32L452RET6P, prefer BOR-enabled power-up sequencing, route the SMPS inductor carefully on a 4-layer PCB to minimise radiated noise, and use ST's STM32CubeMX and HAL/LL libraries to accelerate peripheral configuration. Consider the higher-density STM32L4R/4A part if the application needs 1 MB Flash. This page synthesises distributor pricing, drop-in LQFP-64 alternatives and practical design notes not collated on the manufacturer datasheet, helping procurement and embedded engineers evaluate the STM32L452RET6P against contemporary ARM Cortex-M4F peers.

Devis Contact
STM32L452RET6TR - 80MHz 512KB Flash MCU | STMicroelectronics
STM32L452RET6TR

STM32L452RET6TR - 80MHz 512KB Flash MCU | STMicroelectronics

The STMicroelectronics STM32L452RET6TR is an ultra-low-power Arm Cortex-M4 32-bit microcontroller with FPU running at up to 80 MHz, featuring 512 KB of Flash memory and 160 KB of SRAM in a 64-pin LQFP (10x10 mm) package. It delivers 100 DMIPS at 80 MHz while drawing only 84 uA/MHz in run mode, making it one of the most power-efficient Cortex-M4 devices in the STM32L4 series. An ultra-low-power microcontroller (MCU) is a single-chip computer that integrates a processor core, non-volatile program memory (Flash), volatile data memory (SRAM), and a broad set of peripherals such as ADCs, DACs, timers, and serial interfaces. The STM32L452RET6TR sits in the STM32L4 family, which is part of the broader STM32 32-bit MCU portfolio, itself a member of the Arm Cortex-M ecosystem. Ultra-low-power MCUs are designed for battery-powered and energy-harvesting systems where every microamp matters, while still providing enough compute throughput for real-time control and signal processing. Key features include FlexPowerControl with a 1.71 V to 3.6 V supply range, 145 nA in VBAT mode for RTC and 32x32-bit backup registers, 22 nA in Shutdown mode with 5 wakeup pins, and a 12-bit ADC with hardware oversampling. The device also integrates a USB Device controller, DFSDM (digital filter for sigma-delta modulators), and multiple low-power timers, enabling always-on sensing with minimal energy cost. The STM32L452RET6TR is built on ST's ultra-low-leakage 90 nm process and uses a proprietary adaptive real-time memory accelerator to achieve 100 DMIPS at 80 MHz without wait states. Its analog peripherals include two 12-bit ADCs, one 12-bit DAC, and two ultra-low-power comparators, allowing direct interfacing with sensors and eliminating external signal-conditioning components in many designs. Typical applications include portable medical monitors, industrial IoT sensor nodes, smart metering, wearable fitness trackers, and battery-operated asset trackers. The combination of 512 KB Flash, 160 KB SRAM, and a rich analog front end makes it suitable for edge processing tasks such as filtering, FFT, and motor control. When designing with this device, pay close attention to the VDD/VBAT power architecture and the decoupling network. The 64-pin LQFP package provides 52 user I/O pins, so plan pin allocation carefully to avoid conflicts between the USB, ADC, and timer functions. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for selection, second-sourcing, and layout decisions.

Devis Contact
STM32L452REY6TR - Ultra-low-power ARM Cortex-M4 MCU | STMicroelectronics
STM32L452REY6TR

STM32L452REY6TR - Ultra-low-power ARM Cortex-M4 MCU | STMicroelectronics

The STM32L452REY6TR is an ultra-low-power 32-bit microcontroller from STMicroelectronics, based on the ARM Cortex-M4 core with FPU. It operates at a maximum frequency of 80 MHz and delivers 100 DMIPS with 1.25 DMIPS/MHz, making it suitable for a wide range of battery-powered and energy-efficient applications. The device features 512 KB of Flash memory and 160 KB of SRAM, providing ample storage for complex firmware and data buffering. What is an ARM Cortex-M4 microcontroller? It is a 32-bit processor core designed for embedded systems, offering a balance of performance, power efficiency, and rich peripheral integration. The Cortex-M4 includes a floating-point unit (FPU) and DSP instructions, enabling efficient handling of mathematical and signal-processing tasks. In the system hierarchy, the STM32L452REY6TR sits at the application processor level, managing sensors, communication interfaces, and control loops, while interfacing with memory, power management, and external peripherals. Key features include an operating voltage range of 1.71V to 3.6V, multiple low-power modes (Sleep, Low-power run, Low-power sleep, Stop 0/1/2, Standby, and Shutdown) with current consumption as low as 28 µA in Stop 2 mode, and a rich set of peripherals including multiple USARTs, SPIs, I2Cs, USB 2.0 FS, CAN, and 12-bit ADCs/DACs. The device also integrates a true random number generator (TRNG), a CRC calculation unit, and a 12-channel DMA controller. The STM32L452REY6TR is built on ST's ultra-low-power technology, featuring a flexible power architecture with internal regulators and a low-power RTC. It supports a wide temperature range of -40°C to +85°C and is available in a 64-pin UFBGA package (Y6 suffix), which is ideal for space-constrained designs. The package measures 4.0 x 4.0 mm with a 0.5 mm pitch, offering excellent thermal performance and compactness. Typical applications include industrial sensors, smart meters, wearable devices, medical monitoring equipment, and IoT edge nodes. The combination of low power consumption, high performance, and extensive connectivity makes it a versatile choice for battery-operated systems that require advanced processing capabilities. When designing with this MCU, careful attention to power supply decoupling and PCB layout is essential to achieve the specified low-power performance. Use multiple decoupling capacitors close to the power pins and follow the layout guidelines in the datasheet to minimize noise and ensure reliable operation.

Devis Contact
STM32L452VCI6 - 80MHz Cortex-M4 MCU | STMicroelectronics
STM32L452VCI6

STM32L452VCI6 - 80MHz Cortex-M4 MCU | STMicroelectronics

STMicroelectronics STM32L452VCI6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with floating-point unit, an 80 MHz operating frequency, 256 KB of Flash memory, and a 100-UFBGA 7 x 7 mm package. The device combines USB Device connectivity, DFSDM capability, analog functions, and embedded peripherals in a compact surface-mount package for power-conscious embedded systems. An ultra-low-power microcontroller is a semiconductor controller optimized to complete sensing, control, communications, and data-processing tasks while minimizing active and standby energy consumption. Within the product hierarchy, the STM32L452VCI6 is an Arm Cortex-M4 MCU, a 32-bit RISC microcontroller, and a member of STM32L4 power management-oriented embedded devices. Its USB and DFSDM interfaces distinguish it from basic low-power MCUs while its 7 x 7 mm package supports space-constrained designs. The principal verified features include an Arm Cortex-M4 processor with FPU, operation up to 80 MHz, and 256 KB of Flash storage. The Cortex-M4 architecture supports efficient embedded control and digital signal-processing workloads, while the FPU accelerates suitable floating-point calculations. USB Device support enables the MCU to communicate with a host computer or USB-equipped peripheral, and DFSDM provides a dedicated path for external analog data acquisition. The STM32L452VC family is positioned for applications requiring a balance between processing performance, low-power operation, analog connectivity, and compact packaging. Its 256 KB of Flash provides embedded program storage, while the STM32L4 platform is designed for energy-sensitive products that need more capability than a basic low-power MCU but do not require a high-performance application processor. Typical uses include USB-connected data acquisition equipment, low-power industrial sensing modules, compact audio or communication products, environmental monitoring devices, and portable instrumentation. DFSDM is particularly relevant when an application must acquire signals through an external sigma-delta converter while avoiding a general-purpose ADC for every input. The 100-UFBGA package also helps reduce board area where that benefit outweighs assembly and inspection complexity. Designers should verify the complete pin assignment, exposed-pad requirements, power sequencing, decoupling, and operating-temperature limits against the manufacturer datasheet before layout release. The 7 x 7 mm BGA footprint also demands assembly processes capable of inspecting fine-pitch solder joints. Firmware and peripheral configurations should be checked in detail because USB, DFSDM, clocking, and low-power modes can affect both board design and software architecture. This product page consolidates verified manufacturer and distributor information, distinguishes the target from same-family options, and adds application guidance, comparison parameters, and practical design cautions that are not organized together in the manufacturer datasheet.

Devis Contact
STM32L452VCT6 - Ultra-Low-Power ARM Cortex-M4 MCU | STMicroelectronics
STM32L452VCT6

STM32L452VCT6 - Ultra-Low-Power ARM Cortex-M4 MCU | STMicroelectronics

The STM32L452VCT6 is an ultra-low-power 32-bit microcontroller from STMicroelectronics, based on the ARM Cortex-M4 core with FPU. It operates at a maximum frequency of 80 MHz and delivers 100 DMIPS with 1.25 DMIPS/MHz, making it suitable for a wide range of battery-powered and energy-efficient applications. The device features 256 KB of Flash memory and 160 KB of SRAM, providing ample storage for complex firmware and data buffering. What is an ARM Cortex-M4 microcontroller? It is a 32-bit processor core designed for embedded systems, offering a balance of performance, power efficiency, and rich peripheral integration. The Cortex-M4 includes a floating-point unit (FPU) and DSP instructions, enabling efficient handling of mathematical and signal-processing tasks. In the system hierarchy, a microcontroller (MCU) integrates a processor core, memory, and programmable peripherals on a single chip, serving as the 'brain' of embedded systems. The STM32L4 series specifically targets ultra-low-power applications, extending battery life in portable and IoT devices. Key features of the STM32L452VCT6 include multiple low-power modes (Sleep, Low-power run, Low-power sleep, Stop 0/1/2, Standby, and Shutdown) with current consumption as low as 28 µA in Stop 2 mode with SRAM retention. It integrates a 12-bit ADC with 5 Msps, two 12-bit DACs, two comparators, and two operational amplifiers. Communication interfaces include I2C, SPI, USART, UART, LPUART, SAI, and CAN, along with USB 2.0 full-speed device/host/OTG. The device also features a true random number generator (TRNG), a CRC calculation unit, and a 96-bit unique ID. The STM32L452VCT6 is built on ST's ultra-low-power technology with an adaptive voltage scaling and a flexible power architecture. It includes a multi-speed internal RC oscillator (16 MHz) and a low-power internal oscillator (32 kHz), reducing external component count. The device supports external crystal oscillators for high-accuracy timing and includes a real-time clock (RTC) with calendar and alarm functions. The integrated LCD driver supports up to 8x40 segments, enabling direct connection to segment LCDs without external drivers. Typical applications include industrial sensors, smart meters, healthcare devices, wearable fitness trackers, and IoT edge nodes. Its ultra-low-power modes and rich analog peripherals make it ideal for battery-operated systems that require long operational life. The device also supports secure firmware updates with its read-out protection and memory protection unit, enhancing system security. When designing with the STM32L452VCT6, pay attention to the power supply decoupling: place a 100 nF capacitor close to each VDD pin and a 4.7 µF capacitor on the main VDD rail. Use the internal LDO or external SMPS step-down converter for optimal power efficiency. The VBAT pin should be connected to a backup battery or tied to VDD if not used. For low-power operation, configure unused GPIOs as analog inputs to minimize leakage current.

Devis Contact
STM32L471RET6 - ARM Cortex-M4F 80MHz MCU | STMicroelectronics
STM32L471RET6

STM32L471RET6 - ARM Cortex-M4F 80MHz MCU | STMicroelectronics

The STMicroelectronics STM32L471RET6 is a high-performance ARM Cortex-M4F based microcontroller with floating-point unit (FPU) running at up to 80 MHz. It is part of the STM32L4 series, designed for ultra-low-power applications without compromising performance. The device integrates 512 KB of flash memory and 128 KB of SRAM, along with a rich set of peripherals including multiple 12-bit ADCs, DACs, comparators, op-amps, and advanced communication interfaces such as USART, SPI, I2C, CAN, and USB OTG FS. It is available in a 64-pin LQFP package (LQFP64) with a 10x10 mm body and 0.5 mm pitch. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory (flash and SRAM), and programmable input/output peripherals on a single chip. Microcontrollers are the brains of countless electronic devices, from automotive engine control units to wearable health monitors. In the system hierarchy, a microcontroller is a type of embedded processor, which falls under the broader category of integrated circuits (ICs) and semiconductors. The STM32L471RET6 is a mid-range MCU in the STM32L4 family, positioned between the lower-power STM32L0/L1 series and the higher-performance STM32F4 series, offering a balance of energy efficiency and processing capability. Key features of the STM32L471RET6 include its ultra-low-power modes (Sleep, Low-power run, Low-power sleep, Stop 0/1/2, Standby, and Shutdown) with current consumption as low as 100 nA in Shutdown mode. The device supports a wide supply voltage range of 1.71V to 3.6V, making it suitable for battery-powered applications. It also features a 12-bit ADC with hardware oversampling, a 12-bit DAC, and a true random number generator (TRNG). The FPU accelerates mathematical computations, which is beneficial for signal processing and control algorithms. The MCU is manufactured using ST's 90 nm process technology, enabling low dynamic power consumption. Technical depth: The STM32L471RET6 is built around the ARM Cortex-M4F core with DSP instructions and a single-precision FPU. It includes a memory protection unit (MPU) for enhanced security and reliability. The device supports up to 8x32-bit timers, including a low-power timer (LPTIM) that can operate in Stop mode. Communication peripherals include 3x USART, 3x SPI, 3x I2C, 1x CAN, 1x USB OTG FS, and 1x SAI (serial audio interface). The ADC has a resolution of 12 bits with up to 16 external channels and can operate at up to 5 Msps. The DAC has two channels with 12-bit resolution. The device also includes a flexible memory controller (FMC) for external memory expansion, supporting SRAM, PSRAM, NOR, and NAND flash. Typical applications include industrial sensors and actuators, smart meters, medical devices (e.g., glucose monitors, infusion pumps), wearable fitness trackers, IoT nodes, and portable instrumentation. The ultra-low-power modes and rich analog peripherals make it ideal for battery-operated devices that require long battery life and precise analog measurements. For example, in a smart meter, the STM32L471RET6 can handle metrology calculations, communication protocols, and display control while consuming minimal power in sleep mode between measurements. Design consideration: When designing with the STM32L471RET6, pay attention to the power supply decoupling. Place a 100 nF ceramic capacitor close to each VDD pin and a 4.7 uF capacitor at the main power input. For the VDDA pin, use a dedicated 1 uF capacitor to ensure stable analog performance. Also, configure the clock system carefully: the device can run from an internal 16 MHz HSI oscillator, but for precise timing, use an external 8 MHz crystal with appropriate load capacitors. The boot pins (BOOT0 and BOOT1) must be set correctly for the desired boot mode (flash, system memory, or SRAM).

Devis Contact
STM32L471ZGT6 - 1MB Flash 80MHz Cortex-M4 MCU | STMicroelectronics
STM32L471ZGT6

STM32L471ZGT6 - 1MB Flash 80MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32L471ZGT6 is an ultra-low-power 32-bit microcontroller based on the high-performance Arm Cortex-M4 RISC core with FPU, operating at frequencies up to 80 MHz, packaged in a 144-pin LQFP. The device integrates 1 MB of Flash, 128 KB of SRAM, and a rich peripheral set including CAN, USB, multiple UART/SPI/I2C interfaces, 12-bit ADCs, and a real-time clock for energy-sensitive embedded control applications. An ultra-low-power microcontroller (MCU) is a class of microprocessor that minimizes active and standby current consumption through techniques such as voltage scaling, multiple low-power operating modes, peripheral clock gating, and integrated DC-DC converters. The STM32L4 family extends this concept with the Cortex-M4 core plus DSP instructions and a single-precision floating-point unit, enabling digital signal processing alongside efficient power management. Within the broader taxonomy, the STM32L471ZGT6 sits in the hierarchy MCU -> Arm Cortex-M microcontroller -> ultra-low-power MCU -> power management IC ecosystem. Key features include a 1.8 V to 3.6 V supply range, batch acquisition mode for ADC, multiple low-power modes (Stop, Standby, Shutdown) drawing as little as a few hundred nanoamperes with RTC retention, a built-in 12-bit 5 Msps ADC, two DAC channels, USB 2.0 Full-Speed device/host, three I2C, three SPI, three USART plus UART, two CAN 2.0B, SDMMC, and a Crypt/AES-256 hardware accelerator. The 144-pin LQFP package supports ample GPIO for industrial control panels and sensor hubs. The STM32L471 uses a Cortex-M4 core with FPU and DSP extensions, providing 1.25 DMIPS/MHz and a CoreMark score in the hundreds, balancing DSP capability with extreme energy efficiency. The integrated LDO(Dragon) voltage regulator and switchable DC-DC buck converter allow dynamic trade-off between quiescent current and peak performance. Typical applications include industrial sensor nodes, wearable medical monitors, smart metering, battery-powered IoT gateways, and motor control subsystems where extended battery life and deterministic real-time response are simultaneously required. The 1 MB Flash enables on-board firmware with secure bootloaders, OTA stacks, and rich protocol libraries. When designing, always verify the supply decoupling network (1uF + 100nF + 4.7uF bulk) per ST AN4325 reference design and consider the 32 kHz LSE crystal selection for RTC accuracy. The 144-LQFP package simplifies layout but requires thermal relief for applications pushing >70% CPU duty. This page synthesizes verified distributor pricing, parametric drop-in alternatives, and practical low-power design notes not found in the manufacturer datasheet alone.

Devis Contact
STM32L475VGT6 - 1MB Flash Cortex-M4 MCU, 100-LQFP | STMicroelectronics
STM32L475VGT6

STM32L475VGT6 - 1MB Flash Cortex-M4 MCU, 100-LQFP | STMicroelectronics

The STMicroelectronics STM32L475VGT6 is an ultra-low-power 32-bit ARM Cortex-M4 microcontroller with FPU, 1 MB of Flash, 128 KB of SRAM, and 80 MHz maximum CPU clock, housed in a 100-pin LQFP (14x14 mm) package. It targets battery-powered and energy-harvesting embedded systems where both DSP-class performance and microamp-level quiescent current are required. A microcontroller (MCU) is a single-chip integrated circuit containing a processor core, program/data memory, and programmable peripherals that govern a specific embedded function. The STM32L475VGT6 is a member of the STM32L4 ultra-low-power family, which sits within the broader STM32 32-bit MCU portfolio and is engineered around ST's 110 nm ultra-low-leakage process with adaptive real-time (ART) accelerator. The Cortex-M4 core implements the ARMv7-M architecture with single-precision FPU and DSP extensions, making the part a member of the ARM Cortex-M family that is hierarchically classed as an embedded microcontroller -> 32-bit MCU -> semiconductor IC. Key features include a wide 1.71 V to 3.6 V supply range, batch-collecting 12-bit 5 Msps ADC, two 12-bit DACs, two op-amps, two comparators, USB 2.0 OTG full-speed (with internal PHY), CAN 2.0B, SDMMC, SAI, DFSDM, multiple timers, and a true random number generator (TRNG) for security. Seven main low-power modes (Low-power Run, Sleep, Low-power Sleep, Stop 0/1/2, Standby, Shutdown) bring the typical Stop-mode current down to the microampere range and Standby/Shutdown to the nanoampere range, enabling multi-year battery life when paired with an energy-aware application design. The architecture combines the Cortex-M4 DSP+FPUs with ST's ART Accelerator (instruction cache + pre-fetch) and an MPU, allowing sustained 100 DMIPS performance while maintaining ultra-low dynamic power. An embedded voltage regulator supports dynamic voltage scaling through the PDR1 (power-down) and LP regulator paths, decoupling core voltage from the external supply. Typical applications include wearable fitness/health monitors, smart-metering and home/building automation nodes, industrial sensor hubs, medical point-of-care devices, low-power wireless IoT gateways, asset trackers, and USB-powered human-interface peripherals. The integrated USB OTG FS removes the need for an external PHY in many HID/CDC designs. When designing with the STM32L475VGT6, follow the reference manual's decoupling and layout guidance (one 100 nF per VDD pair, one bulk 4.7 uF on the regulator input) and place the HSE crystal traces within the documented loading and guard-band limits. Selecting the right low-power pair must also consider whether the application can tolerate the wake-up latency of Stop 2 / Standby modes versus the higher autonomy of Low-power Run.

Devis Contact
STM32L476RET6 - 80MHz ARM Cortex-M4 MCU 512KB Flash | STMicroelectronics
STM32L476RET6

STM32L476RET6 - 80MHz ARM Cortex-M4 MCU 512KB Flash | STMicroelectronics

The STMicroelectronics STM32L476RET6 is an ultra-low-power 32-bit ARM Cortex-M4 microcontroller with FPU, operating at up to 80 MHz and delivering 100 DMIPS, integrating 512 KB of Flash and 128 KB of SRAM in a 64-pin LQFP (10x10 mm) package. This device targets battery-powered and energy-harvesting applications where active-mode performance and deep-sleep current must coexist. Core peripherals include USB 2.0 Full-Speed OTG, an integrated LCD controller (8x40 or 4x44 segments), three 12-bit ADCs (5 Msps), two 12-bit DACs, two operational amplifiers, and two comparators. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripheral interfaces. The Cortex-M4 family adds a single-precision FPU and DSP extensions, and the STM32L4 sub-family is optimized for ultra-low-power operation - in the hierarchy: ARM Cortex-M4 -> 32-bit MCU -> microcontroller -> semiconductor. STM32L4 devices extend battery life through multiple low-power modes (Shutdown, Standby, Stop with RTC), a built-in SMPS for core supply, and silicon-design techniques that push Stop-mode current down to a few microamps with RTC retention. Key features include a 1.7 V to 3.6 V supply range, 12 KB SRAM available in Standby with RTC for state retention, DMA1/DMA2 controllers, up to 83 I/O ports (5V-tolerant), and AES-256 / True Random Number Generator (TRNG) hardware accelerators. The integrated SMPS supports direct Li-ion cell operation, while the Vcore domain uses an internal voltage regulator for run/low-power modes. Architecturally, the Cortex-M4 core is paired with an ART Accelerator and an instruction cache that allows near-zero-wait-state execution from Flash at full 80 MHz. The bus matrix interconnects the core, DMA, AHB/APB peripherals, and memory banks to enable parallel transfers without starving the CPU. Peripherals such as timers (16-/32-bit), I2C, SPI, USART, UART, SAI, CAN 2.0B, SDMMC, and USB OTG FS share DMA channels, minimizing CPU overhead. Typical applications include wearable fitness/health bands, industrial sensor nodes (LoRaWAN / NB-IoT), portable medical meters, e-paper / LCD IoT displays, GPS trackers, low-power wireless sensor hubs, smart home battery devices (BLE/Zigbee hosts), and USB-equipped data loggers. The wide temperature range (-40C to +85C / +105C) and high integration reduce BOM cost and PCB area in these designs. When designing with this MCU, plan the decouple network carefully: place one 100 nF X7R cap per VDD pin, a 4.7 uF bulk on the main VBAT/VDD rail, and use the optional SMPS inductor (4.7 uH, low-DCR) according to the reference layout. Always populate NRST with the 10 kohm / 100 nF reset network shown in the datasheet to avoid spurious resets on power-up. This page synthesizes verified distributor pricing, drop-in same-package alternatives from the STM32L4 family, and practical design notes not consolidated in the manufacturer datasheet. Engineers gain concise selection context for energy-aware designs where Stop-mode current and 80 MHz headroom must coexist.

Devis Contact
STM32L476RGT6 - 80MHz Cortex-M4 1MB Flash MCU | STMicroelectronics
STM32L476RGT6

STM32L476RGT6 - 80MHz Cortex-M4 1MB Flash MCU | STMicroelectronics

The STMicroelectronics STM32L476RGT6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M4 core with FPU running at up to 80 MHz (100 DMIPS), integrating 1 MB of Flash memory, 128 KB of SRAM, USB OTG FS, an LCD controller, and a flexible memory extension architecture, packaged in a 64-pin LQFP (10 x 10 mm) surface-mount package. An ultra-low-power microcontroller (MCU) is a complete computing system on a single chip that combines a processor core, memory, and peripherals while minimizing energy consumption. Within the power-management hierarchy, devices like the STM32L476 sit in the STM32L4 series, positioned above the STM32L0/L1 families and below the high-performance STM32F4/H7 lines, targeting battery-powered and energy-harvesting embedded systems. Key features include the Cortex-M4 with single-precision FPU and DSP instructions for efficient signal processing, six embedded SRAM banks totaling 128 KB with hardware parity checking, a ART accelerator for 0-wait-state execution from Flash, and dual-mode operation via the embedded ST-LINK-free boot loader. Dynamic efficiency is achieved through multiple low-power modes, flexible voltage scaling, and BOR-supervised operation from a 1.71 V to 3.6 V supply. The peripheral set covers USB OTG FS device/host, an 8x to 48x segment LCD driver, three 12-bit ADCs (5 MSPS), two 12-bit DACs, a DFSDM digital filter for sigma-delta modulators, multiple SPI/I2C/UART interfaces, SAI audio, CAN, Quad-SPI for external memory, AES and HASH cryptographic accelerators, an RNG, and a RTC with calendar. Typical applications include battery-powered meters and sensors, portable medical devices, IoT nodes, and human-machine interfaces with LCD displays. The combination of 1 MB Flash and ultra-low active current suits designs needing both code headroom and long battery life. Design consideration: leverage the flexible Stop mode with selectable wake-up peripherals, and budget Flash wait states versus VOS voltage scaling to balance 80 MHz performance against lowest dynamic current. This page synthesizes distributor pricing, drop-in alternatives, pin-compatibility notes, and practical design guidance not found in a single manufacturer datasheet.

Devis Contact
STM32L476VGT6 - Ultra-Low-Power Cortex-M4 MCU 80MHz 1MB Flash | STMicroelectronics
STM32L476VGT6

STM32L476VGT6 - Ultra-Low-Power Cortex-M4 MCU 80MHz 1MB Flash | STMicroelectronics

The STM32L476VGT6 is an ultra-low-power 32-bit microcontroller from STMicroelectronics, based on the high-performance Arm® Cortex®-M4 32-bit RISC core with floating-point unit (FPU). It operates at a frequency of up to 80 MHz, delivering 100 DMIPS performance while maintaining exceptional energy efficiency. The device features 1 Mbyte of Flash memory and 128 Kbytes of SRAM, making it suitable for a wide range of battery-powered and energy-conscious applications. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It integrates a processor core, memory (Flash and SRAM), and programmable input/output peripherals on a single chip. Microcontrollers are the brains of countless electronic devices, from automotive engine controllers to wearable health monitors. The STM32L476VGT6 belongs to the STM32L4 series, which is optimized for ultra-low-power operation without compromising performance, positioning it within the broader hierarchy of embedded processors and controllers. Key features of the STM32L476VGT6 include its 80 MHz Arm Cortex-M4 core with FPU, 1 MB Flash, 128 KB SRAM, and a rich set of peripherals such as USB OTG FS, LCD controller, and digital filters for sigma-delta modulators (DFSDM). It supports a wide supply voltage range from 1.71V to 3.6V, enabling direct battery operation. The device also integrates advanced low-power modes, including Sleep, Low-power Run, and Stop modes, with typical current consumption in the microamp range, extending battery life in portable applications. Technically, the STM32L476VGT6 leverages ST's proprietary ultra-low-power technology, featuring multiple power domains and dynamic voltage scaling. The FPU accelerates mathematical computations, beneficial for signal processing and control algorithms. The device includes a 12-bit ADC with hardware oversampling, multiple timers, and communication interfaces (I2C, SPI, USART, CAN, and USB). The LCD controller supports up to 8x40 segments, ideal for direct display driving without external components. Typical applications include smart meters, medical devices (e.g., glucose monitors, hearing aids), industrial sensors, and IoT edge nodes. Its ultra-low-power consumption and rich analog peripherals make it ideal for battery-operated devices that require long operational life. The 100-pin LQFP package (14x14 mm) offers a compact footprint with ample I/O for complex designs. When designing with this MCU, pay attention to the power supply decoupling: place a 100 nF capacitor close to each VDD pin and a 4.7 uF bulk capacitor on the main supply. Also, utilize the low-power modes effectively by configuring the RTC and wakeup sources to minimize average current consumption.

Devis Contact
STM32L486JGY6TR - Ultra-low-power ARM Cortex-M4F MCU | STMicroelectronics
STM32L486JGY6TR

STM32L486JGY6TR - Ultra-low-power ARM Cortex-M4F MCU | STMicroelectronics

The STM32L486JGY6TR is an ultra-low-power 32-bit microcontroller from STMicroelectronics, based on the ARM Cortex-M4F core with FPU, operating at up to 80 MHz. It is part of the STM32L4 series, designed for high efficiency and long battery life in a wide range of applications. The device integrates 1 Mbyte of Flash memory and 128 Kbytes of SRAM, along with a rich set of peripherals including analog, digital, and communication interfaces. What is an ARM Cortex-M4F microcontroller? It is a 32-bit processor core designed for embedded systems, featuring a floating-point unit (FPU) for efficient handling of mathematical operations, and a memory protection unit (MPU) for enhanced security. The Cortex-M4F is part of the ARM Cortex-M family, which includes the M0, M0+, M3, M4, and M7 cores, each offering different performance and power trade-offs. In the system hierarchy, a microcontroller (MCU) integrates a processor core, memory, and peripherals on a single chip, enabling it to control electronic systems in applications ranging from consumer electronics to industrial automation. Key features of the STM32L486JGY6TR include its ultra-low-power modes (Sleep, Low-power run, Low-power sleep, Stop 0/1/2, Standby, and Shutdown), which are critical for battery-powered devices. It also features a 12-bit ADC with hardware oversampling, a 12-bit DAC, two comparators, and operational amplifiers. The device supports multiple communication interfaces: I2C, SPI, USART, UART, LPUART, SAI, CAN, USB OTG FS, and SDMMC. Additionally, it includes a true random number generator (TRNG), a CRC calculation unit, and a 96-bit unique ID. The STM32L486JGY6TR is manufactured using ST's 40nm process technology, which contributes to its low power consumption. The core operates at 1.8V to 3.6V, with a wide temperature range of -40°C to +85°C. The device is available in a 73-ball WLCSP package (0.4mm pitch), making it suitable for space-constrained designs. The package is lead-free and RoHS compliant. Typical applications include wearable devices, smart sensors, medical monitoring equipment, industrial sensors, and IoT edge nodes. The ultra-low-power modes and rich analog peripherals make it ideal for battery-operated devices that require long operational life. For example, in a wearable health monitor, the STM32L486JGY6TR can sample sensor data, process it with the FPU, and communicate via BLE (through an external module) while consuming minimal power. When designing with this device, pay attention to the power supply decoupling: place a 100nF capacitor close to each VDD pin and a 1uF capacitor on the main supply. Also, use the low-power modes effectively by configuring the RTC and wake-up sources to maximize battery life. The device supports a wide range of development tools, including STM32CubeMX and STM32CubeIDE, which simplify configuration and code generation.

Devis Contact
STM32L486QGI6 - 80MHz Cortex-M4 1MB MCU | STMicroelectronics
STM32L486QGI6

STM32L486QGI6 - 80MHz Cortex-M4 1MB MCU | STMicroelectronics

The STMicroelectronics STM32L486QGI6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M4 RISC core, operating at up to 80 MHz and integrating 1 MB of Flash memory in a 132-pin UFBGA (7 x 7 mm) package. Its key headline specifications are an 80 MHz maximum core frequency, 1 MB of Flash storage, and a compact 132-UFBGA package. A microcontroller is a programmable semiconductor that combines a processor core, embedded Flash, RAM, peripherals, and communication interfaces into one device. The STM32L4 family belongs to the broader embedded-processing hierarchy: microcontroller -> 32-bit RISC microcontroller -> Arm Cortex-M microcontroller -> STM32L4 series. This integration allows an equipment designer to execute firmware, acquire data, control peripherals, and communicate with external systems without using separate memory and logic devices. The STM32L486QGI6 combines an Arm Cortex-M4 processor with an FPU, according to the verified Mouser product listing. Its 1 MB Flash configuration provides substantially more program storage than smaller STM32L4 variants and is suitable for complex control firmware, protocol stacks, data acquisition routines, and embedded user interfaces. The manufacturer identifies the STM32L486xx family as an ultra-low-power MCU platform designed for applications where energy efficiency and processing capability are both important. Verified distributor information identifies LCD support, USB OTG, and AES functionality for this device family. These capabilities make the MCU relevant to compact industrial controllers, USB-connected sensors, secure access terminals, and embedded human-machine-interface systems. The target order code is supplied in a 132-UFBGA tray package according to Arrow Electronics, while the exact memory, voltage, and temperature details not present in the verified source extracts remain designated for additional datasheet confirmation. The principal design consideration is package-level planning. A 132-UFBGA device requires a dense multilayer PCB, fine-pitch ball placement, controlled escape routing, and assembly capability suited to BGA packages. Designers must follow STMicroelectronics land-pattern, routing, solder-mask, and thermal guidance rather than adapting a generic QFN layout. Although the 7 x 7 mm package is compact, its 132 balls create a substantially more demanding manufacturing process than a leaded package. This product page consolidates verified manufacturer and distributor information into a technical sourcing reference. It combines the exact 80 MHz, 1 MB Flash, 132-UFBGA, voltage, packaging, and price attributes with drop-in-family alternatives, interface-focused applications, and package-aware engineering guidance that should be checked against the complete manufacturer datasheet before schematic release.

Devis Contact
STM32L486RGT6 - ARM Cortex-M4F 80MHz MCU | STMicroelectronics
STM32L486RGT6

STM32L486RGT6 - ARM Cortex-M4F 80MHz MCU | STMicroelectronics

The STMicroelectronics STM32L486RGT6 is a high-performance, ultra-low-power ARM Cortex-M4F microcontroller with floating-point unit (FPU) and DSP instructions, operating at up to 80 MHz. It is part of the STM32L4 series, designed for applications requiring low power consumption without compromising performance. The device features 1 Mbyte of Flash memory and 128 Kbytes of SRAM, along with a rich set of peripherals including analog, digital, and communication interfaces. What is an ARM Cortex-M4F microcontroller? It is a 32-bit processor core from ARM Holdings that includes a floating-point unit (FPU) for hardware-accelerated single-precision math, and DSP instructions for signal processing. In the system hierarchy, it sits as the central processing unit (CPU) within a microcontroller (MCU), which integrates memory, peripherals, and I/O on a single chip. The Cortex-M4F is widely used in embedded systems where a balance of performance, power efficiency, and cost is required, such as in IoT devices, industrial control, and consumer electronics. Key features of the STM32L486RGT6 include: 1 Mbyte Flash, 128 Kbytes SRAM, 80 MHz CPU, ultra-low-power modes (down to 100 nA in shutdown), a 12-bit ADC with 5 Msps, a 12-bit DAC, multiple timers, and communication interfaces including USART, SPI, I2C, USB OTG FS, CAN, and SDMMC. It also integrates a hardware cryptographic accelerator (AES, DES, 3DES) and a true random number generator (TRNG) for security applications. The STM32L486RGT6 is built on ST's ultra-low-power technology, featuring multiple power modes (Sleep, Low-power run, Low-power sleep, Stop 0/1/2, Standby, Shutdown) that allow designers to optimize energy consumption. The device operates from 1.71V to 3.6V supply, making it suitable for battery-powered applications. Its advanced analog peripherals, including op-amps and comparators, enable sensor signal conditioning without external components. Typical applications include smart meters, medical devices, wearable fitness trackers, industrial sensors, and IoT edge nodes. The combination of low power, high performance, and security features makes it ideal for applications that require long battery life and secure data handling. When designing with this MCU, pay attention to the power supply decoupling: place a 100 nF capacitor close to each VDD pin and a 4.7 uF bulk capacitor. For low-power modes, configure the clock source and voltage regulator appropriately to achieve the desired current consumption. The STM32L4 series offers a comprehensive set of development tools, including STM32CubeMX and STM32CubeIDE, which simplify configuration and code generation.

Devis Contact
STM32L486VGT6 - ARM Cortex-M4F MCU 1MB Flash | STMicroelectronics
STM32L486VGT6

STM32L486VGT6 - ARM Cortex-M4F MCU 1MB Flash | STMicroelectronics

The STMicroelectronics STM32L486VGT6 is a high-performance, ultra-low-power ARM Cortex-M4F based microcontroller with 1MB of Flash memory and 128KB of SRAM, packaged in a 100-pin LQFP (VGT6 suffix). It operates at a maximum frequency of 80 MHz, delivering 100 DMIPS with DSP instructions and a hardware floating-point unit (FPU) for signal processing and control applications. What is an ARM Cortex-M4F microcontroller? It is a 32-bit processor core designed for embedded systems that require a balance of performance, energy efficiency, and advanced digital signal processing. The Cortex-M4F includes a single-precision FPU and DSP instructions, making it suitable for applications involving real-time control, sensor fusion, and audio processing. In the system hierarchy, it sits above simple 8-bit MCUs but below application processors, offering deterministic real-time behavior with low power consumption. Key features of the STM32L486VGT6 include an ultra-low-power mode with 100 nA shutdown current, a 12-bit ADC with 5 MSPS, two 12-bit DACs, multiple communication interfaces (USART, SPI, I2C, USB OTG FS, CAN, SAI), and a true random number generator (TRNG). It also integrates a cryptographic acceleration unit (AES, DES, and hash) for secure applications. The device supports a wide supply voltage range of 1.71V to 3.6V, making it ideal for battery-powered devices. The STM32L486VGT6 is built on ST's ultra-low-power technology, featuring multiple low-power modes (Sleep, Low-power Run, Low-power Sleep, Stop 2, Standby, Shutdown) that allow designers to optimize energy consumption. The FlexPowerControl feature enables independent power domains for the core, I/Os, and backup domain, providing flexibility in power management. The device also includes a 32-bit low-power timer, a real-time clock (RTC) with calendar, and a touch sensing controller. Typical applications include industrial sensors, smart meters, medical devices, wearable electronics, and IoT nodes. Its combination of low power, high performance, and rich peripherals makes it suitable for applications requiring long battery life without compromising on processing capability. For example, in a smart meter, the STM32L486VGT6 can handle metrology calculations, communication protocols, and display control while maintaining low average power consumption. When designing with this device, pay attention to the power supply decoupling: place a 100 nF capacitor close to each VDD pin and a 4.7 uF capacitor at the main supply. For low-power operation, configure unused GPIOs as analog inputs to avoid leakage currents. The device supports in-application programming (IAP) and in-circuit programming (ICP) via SWD or JTAG, facilitating firmware updates in the field.

Devis Contact
STM32L486ZGT3 - 80MHz Cortex-M4 1MB MCU | STMicroelectronics
STM32L486ZGT3

STM32L486ZGT3 - 80MHz Cortex-M4 1MB MCU | STMicroelectronics

STMicroelectronics STM32L486ZGT3 is an ultra-low-power Arm Cortex-M4 32-bit RISC microcontroller operating up to 80 MHz, with 1 MB of flash memory and a 144-pin LQFP 20 x 20 mm package. The device is configured for 1.8 V, 2.5 V, or 3.3 V operation and includes an FPU, LCD support, USB OTG, and AES capability. A microcontroller is a programmable system-on-chip containing a processor core, memory, and peripherals on one package. The STM32L4 family belongs to the broader hierarchy of embedded processors, 32-bit microcontrollers, and low-power embedded systems. STM32L486 devices combine general-purpose control performance with energy-oriented features suited to battery-powered, industrial, sensing, communications, and human-interface applications. Three headline characteristics define this particular device. Its Arm Cortex-M4 processor supports 32-bit execution at up to 80 MHz, while the single-bank 1 MB flash arrangement provides room for application code and firmware updates. Its 144-lead LQFP package exposes a broad set of GPIO and peripheral connections while supporting automated board assembly. The STM32L486 platform also provides USB OTG, AES, LCD, and floating-point features identified in the verified product and distributor information. The exact RAM capacity, operating-temperature limits, supply-current figures, ADC characteristics, timer counts, and detailed peripheral inventory were not included in the supplied verified excerpts. Those values remain intentionally unspecified in the specification table rather than being inferred from related devices. The available data instead confirms the device family’s ultra-low-power positioning and the target part’s 80 MHz maximum frequency, 1 MB flash configuration, USB OTG support, LCD support, and AES capability. Typical uses include industrial sensor controllers, compact data acquisition equipment, USB-connected peripherals, low-power instrumentation, LCD-equipped human-interface panels, and embedded communications equipment. The 144-pin package makes the MCU appropriate when a design needs numerous discrete signals rather than a small microcontroller with only a few exposed pins. Engineering designs must verify the exact pin functions, alternate-function mappings, decoupling requirements, clock tree, and peripheral electrical limits against the official STM32L486ZG documentation before layout release. Pin multiplexing also requires a consistent allocation across USB, LCD, debug, communications, and general-purpose I/O. Power sequencing and exposed 144-lead assembly demand careful board-level thermal and contamination controls. This page consolidates the verified manufacturer identity, package, core, memory, interface, voltage, and sourcing information into an engineering-oriented resource. It also identifies where drop-in family alternatives require firmware, feature, and peripheral verification rather than assuming that a shared package guarantees complete behavioral equivalence.

Devis Contact
STM32L496AEI6 - 80MHz Cortex-M4 512KB Flash MCU | STMicroelectronics
STM32L496AEI6

STM32L496AEI6 - 80MHz Cortex-M4 512KB Flash MCU | STMicroelectronics

The STMicroelectronics STM32L496AEI6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with FPU operating up to 80 MHz (100 DMIPS), integrating 512 KB of embedded Flash and 320 KB of SRAM in a 169-ball UFBGA (7x7 mm) package. It runs from a 1.71 V to 3.6 V supply and offers a -40 °C to 85 °C industrial temperature range. A microcontroller (MCU) is a single silicon device that bundles a CPU core, program memory, working RAM and a rich set of peripherals onto one package. In the power-management hierarchy an MCU belongs to the embedded processing family, sitting above simple 8-bit controllers and alongside DSP, FPGA and application-processor alternatives. The STM32L4 series is defined by ST's FlexPowerControl architecture, which keeps standby, shutdown and low-power-run currents at tens to hundreds of nanoamperes while retaining full Cortex-M4 performance. Key differentiators of the STM32L496AEI6 include 320 nA consumption in VBAT mode for RTC and 32 backup registers, a 25 nA shutdown mode with 5 wake-up pins, and a suite of integrated connectivity: USB OTG full-speed with crystal-less support, audio interfaces (SAI, I2S, SAI), crypto accelerators (AES, HASH, RNG), and support for external switched-mode power supplies through the SMPS pin. A 12-bit ADC, dual DAC and comparators round out the analog peripherals. Architecturally, the device combines a 4.17 MHz Cortex-M4 core with a flexible power scaler, multiple low-power modes, an LCD segment/display controller, and up to 108 I/O in the 169-ball option. Memory is organized with 320 KB of SRAM split across SRAM1/SRAM2, plus a 4 KB backup SRAM, while the 512 KB Flash supports dual-bank execution for in-field firmware updates. Typical applications include battery-powered IoT and wearable sensor nodes, low-power industrial data loggers, USB-connected portable instruments, compact audio players and USB-C PD accessory controllers, and medical monitoring devices where standby current dominates the power budget. When designing around this part, note that the 169-ball UFBGA footprint requires fine-pitch BGA assembly and careful via-in-pad layout; plan for a via array under the ball field to improve thermal and electrical performance, and confirm the SWD debug and bootloader access pins remain routable on a dense 7x7 mm land pattern. This page consolidates distributor availability, package details, same-package drop-in alternatives, and practical design notes that are not found together in the original manufacturer datasheet, giving engineers a single reference for sourcing and design decisions.

Devis Contact
STM32L496AGI6 - 80MHz Cortex-M4F 1MB MCU | STMicroelectronics
STM32L496AGI6

STM32L496AGI6 - 80MHz Cortex-M4F 1MB MCU | STMicroelectronics

STMicroelectronics STM32L496AGI6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with floating-point unit, 80 MHz maximum operating frequency, 1 MB Flash memory, and a 169-UFBGA 7 x 7 mm package. It operates from a 1.71 V to 3.6 V supply and combines USB OTG FS, LCD, DFSD, audio, HASH, and external SMPS support according to the manufacturer datasheet. The STM32L496AGI6 is suitable for industrial embedded systems, low-power data acquisition, compact user interfaces, USB-connected controls, and secure-connected equipment. An ultra-low-power microcontroller is an embedded semiconductor that combines a processor core, memory, peripherals, and low-power operating modes in one integrated circuit. The STM32L4 family belongs to the Arm Cortex-M microcontroller hierarchy and uses the Cortex-M4F core, which adds single-precision floating-point instructions for control, signal-processing, and sensor workloads. Its low-power architecture supports battery-powered and energy-conscious designs without requiring a separate high-performance processor. The principal device features include 100 DMIPS class performance, up to 1 MB of Flash, 320 KB of SRAM, USB OTG FS, an Arm Cortex-M4F CPU with FPU, and FlexPowerControl low-power operation. Backup-domain operation retains RTC-related functionality and 32 x 32-bit backup registers with a VBAT supply current of 320 nA. Shutdown mode consumes 25 nA and supports five wake-up sources, making the MCU applicable to compact instruments and long-life battery equipment. The STM32L496AGI6 combines substantial compute and peripheral capability with a 1.71 V minimum operating voltage. This allows designers to use 3.3 V supplies directly while supporting lower-voltage power domains. Its integrated connectivity and security-oriented peripherals can reduce external component count in USB, display, storage, and authenticated data-processing designs. Exact pin assignments, peripheral availability, and operating limits must be confirmed against the STM32L496xx manufacturer datasheet before schematic capture. Typical applications include industrial sensor hubs, portable medical and laboratory instruments, USB OTG data loggers, compact human-machine interfaces, low-power edge nodes, and audio-capable embedded controls. The USB OTG FS interface is useful for configuration and data transfer, while LCD support and DFSD capability suit display-oriented and removable-storage designs. For designs requiring Ethernet, industrial communication, or low-power wireless links, the companion transceiver or radio must be selected separately. PCB planning should account for the 169-UFBGA 7 x 7 mm land pattern, exposed-pad thermal requirements, decoupling, signal integrity, and manufacturing capabilities. Place input and bulk decoupling capacitors close to the supply pins, preserve a low-impedance return path beneath the device where supported by the package drawing, and validate the escape-routing strategy before high-volume release. Firmware, boot configuration, supply sequencing, and peripheral pin multiplexing must also match the device variant and package. This product record combines manufacturer datasheet facts, distributor availability and pricing information, package constraints, application guidance, and a strict drop-in alternative assessment. That engineering-focused synthesis helps distinguish electrical capability from true PCB-level replacement suitability and identifies where procurement data or pin-level validation remains necessary.

Devis Contact
STM32L496QEI6 - 80MHz Cortex-M4 512KB MCU | STMicroelectronics
STM32L496QEI6

STM32L496QEI6 - 80MHz Cortex-M4 512KB MCU | STMicroelectronics

The STMicroelectronics STM32L496QEI6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with a maximum clock frequency of 80 MHz, 512 KB of embedded Flash memory, and a 132-UFBGA 7 x 7 mm package. Designed for energy-sensitive embedded systems, it combines real-time processing capability with integrated connectivity, security, and low-power features. The verified distributor data identifies a single-core Cortex-M4 architecture and USB OTG, LCD, and DSP-related capabilities. Its combination of performance, memory, and package density suits compact industrial controllers, connected sensors, human-interface systems, and low-power edge devices. An ultra-low-power microcontroller is a semiconductor device designed to complete control, sensing, communications, and data-processing tasks while minimizing energy consumption. The STM32L496 belongs to the STM32L4 family of low-power microcontrollers, combining a high-performance Arm Cortex-M4 core with peripherals for security, connectivity, analog measurement, timing, and human-machine-interface functions. This places it within the embedded-processing hierarchy: microcontroller, 32-bit RISC processor, semiconductor, and embedded-control platform. Key verified features include an 80 MHz Arm Cortex-M4 core, 512 KB Flash, a 132-UFBGA package, and ultra-low-power positioning. Distributor listings also identify USB OTG and LCD support, while the STMicroelectronics product family page describes the STM32L496xx devices as ultra-low-power Cortex-M4 MCUs operating up to 80 MHz. These features make the device suitable when an engineer needs substantial processing performance without moving to a larger general-purpose MCU architecture. The STM32L496QEI6 is manufactured in a 132-UFBGA 7 x 7 mm package, requiring careful PCB layout, fine-pitch routing, and assembly validation. Unlike a simple through-hole microcontroller, its dense package can reduce board area but increases sensitivity to solderability, via placement, thermal performance, and manufacturing capability. A complete design should follow the manufacturer pinout, recommended land pattern, decoupling strategy, and PCB guidelines in the STM32L496 documentation. Typical applications include industrial control and automation, USB-connected data acquisition, low-power sensor nodes, LCD-equipped user interfaces, building and energy systems, and compact embedded products. For battery- or energy-harvesting designs, the STM32L496 family is attractive because its low-power architecture can reduce the energy required between task wake-ups. The exact low-power current figures and peripheral specifications should be confirmed in the manufacturer datasheet before final design sign-off. A key design consideration is package and power-rail integrity. Place all required decoupling capacitors close to the device supply pins, route sensitive signals away from high-current switching paths, and preserve the manufacturer-defined exposed-pad and thermal layout. Verify pin multiplexing, alternate-function conflicts, clock configuration, USB requirements, and firmware support before releasing a PCB for production. This page combines verified distributor information with engineering guidance intended to make the STM32L496QEI6 selection process more transparent.

Devis Contact
STM32L496QGI3 - 80MHz 1MB Cortex-M4 MCU | STMicroelectronics
STM32L496QGI3

STM32L496QGI3 - 80MHz 1MB Cortex-M4 MCU | STMicroelectronics

STMicroelectronics STM32L496QGI3 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with floating-point unit, operating up to 80 MHz, with up to 1 MB Flash and 320 KB SRAM in a 132-UFBGA 7 x 7 mm package. A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, peripherals, and communication interfaces into one component. In the hierarchy, STM32L496QGI3 is an Arm Cortex-M4 MCU, an embedded microcontroller, and a semiconductor within the broader STM32L4 family. Its combination of processing performance, low-power modes, and extensive connectivity supports compact embedded systems. Key features include an Arm Cortex-M4 processor with FPU, 100 DMIPS performance, 1 MB Flash, and 320 KB SRAM. The device also supports USB OTG FS, audio, HASH, and an external SMPS. Its operating supply range is 1.71 V to 3.6 V, while the documented temperature options span -40 °C to 85 °C, 105 °C, or 125 °C, depending on the ordering variant. The STM32L496 architecture combines a high-performance 32-bit RISC core with low-power FlexPowerControl operating modes. Low-power behavior includes 320 nA in VBAT mode for the RTC and 32 x 32-bit backup registers, plus 25 nA shutdown consumption with five wakeup pins. These characteristics suit battery-operated and always-on products where standby current matters as much as active processing speed. Typical uses include industrial control, USB-connected data acquisition, human-interface equipment, sensor hubs, portable instruments, and low-power embedded gateways. The USB OTG FS interface can simplify host or device connectivity, while the large memory footprint supports firmware, data buffering, and application logic. The external SMPS option is useful when system power architecture requires more flexibility than a fixed internal regulator arrangement. For PCB design, use the manufacturer pin and package guidance for the 132-UFBGA land pattern, and verify ball assignments before routing. Decoupling, ground-plane continuity, and high-speed signal return paths are critical because a compact BGA package leaves limited routing space. Confirm the exact peripheral pin multiplexing, power sequencing, and exposed-pad connection from the manufacturer datasheet. This product page combines verified distributor identification and manufacturer datasheet specifications with package, sourcing, and design context. It is intended to help engineers compare the STM32L496QGI3 with same-package alternatives and plan a compliant, thermally sound implementation without treating unrelated MCUs as drop-in replacements.

Devis Contact