ADMV4821-EVAL - 24-29.5GHz 5G Beamformer Eval Board | Analog Devices
Référence : ADMV4821-EVAL ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $1500 | $1 500,00 |
| 10 | $1425 | $14 250,00 |
| 100 | $1350 | $135 000,00 |
| 500 | $1275 | $637 500,00 |
| 1 000 | $1200 | $1 200 000,00 |
ADMV4821-EVAL Présentation
A beamformer is a highly integrated RF front-end component that electronically steers antenna beams by adjusting the phase and amplitude of signals across multiple antenna elements. In massive MIMO systems, beamformers like the ADMV4821 are essential for achieving the high data rates and spectral efficiency required by 5G networks. The ADMV4821 belongs to the class of millimeter-wave (mmW) beamformer ICs, which are part of the broader category of RF front-end modules used in base stations and user equipment.
Key features of the ADMV4821 include 16 selectable TX channels and 16 selectable RX channels, dual polarization support, and a frequency range covering 24 GHz to 29.5 GHz. The evaluation board simplifies testing by providing all necessary power regulation and control interfaces, allowing engineers to focus on RF performance validation. The board is designed for use with the SDP-S controller, which provides a USB interface for software control of the beamformer's settings.
The ADMV4821 is fabricated in a SiGe process, offering a good balance of performance and integration for mmW applications. The device includes on-chip LDO regulators to ensure clean power delivery to the RF circuitry, reducing external component count. The evaluation board's layout is optimized for 50-ohm impedance matching, ensuring accurate measurements of gain, phase, and beamforming performance.
Typical applications for the ADMV4821-EVAL include 5G NR base station development, phased array antenna prototyping, and beamforming algorithm validation. The board is also useful for evaluating the ADMV4821 in test and measurement setups, where its wide frequency coverage and dual-polarization capability are advantageous.
When using the ADMV4821-EVAL, ensure proper power sequencing and control via the SDP-S board. The evaluation board requires a 5V supply and a USB connection to the controller. For accurate RF measurements, use calibrated test equipment and follow the guidelines in the user guide UG-1564.
Alternatives de remplacement direct pour ADMV4821-EVAL — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
ADMV4821-EVALZ
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ADMV4801-EVALZ
⚡ Même boîtier ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
PE188200A-Z
⚡ Même boîtier📋 Alternative de référence (hors catalogue)
ADMV4821-EVAL Spécifications (publiées par le fabricant)
| Frequency Range | 24 GHz to 29.5 GHz |
| Number of TX Channels | 16 |
| Number of RX Channels | 16 |
| Polarization | Dual (Horizontal and Vertical) |
| RF Input/Output Impedance | 50 ohm single-ended |
| Supported 5G NR Bands | n257, n258, n261 |
| Technology | Silicon Germanium (SiGe) |
| Evaluation Board Includes | ADMV4821, LDO regulators, level shifters, EVAL-SDP-CS1Z controller |
| Controller Interface | USB via SDP-S |
| Tension d'alimentation | 5V (typical) |
| Package Type | Evaluation Board (PCB) |
| Statut RoHS | Compliant |
| Lifecycle | Recommended for New Designs |
| Datasheet Revision | Rev. B |
Interfaces et connecteurs du ADMV4821-EVAL
Le ADMV4821-EVAL expose les interfaces et connecteurs suivants tels que publiés par le fabricant : Alimentation. Le brochage de l'embase d'extension, la numérotation des broches des connecteurs et les limites électriques sont définis dans la documentation du fabricant.
| Alimentation | 5V (typical) |
Consultez la documentation du fabricant pour le brochage complet du connecteur d'extension et la numérotation des broches du connecteur.
Caractéristiques de puissance et thermiques
| Alimentation | 5V (typical) |
Paramètres d'alimentation et thermiques pour ADMV4821-EVAL tels que publiés par le fabricant.
Applications typiques
ADMV4821-EVAL convient pour 6 applications: 5G NR Base Station Development, Phased Array Antenna Prototyping, Beamforming Algorithm Validation, Test and Measurement Equipment, Satellite Communication Systems, Radar Systems.
5G NR Base Station Development
The ADMV4821-EVAL is used to prototype and validate 5G NR base station beamforming modules. Its 24-29.5 GHz frequency coverage supports n257, n258, and n261 bands, and the 16 TX/16 RX channels enable massive MIMO testing. The board's integrated LDOs and level shifters simplify power and control, allowing engineers to focus on RF performance. With dual polarization, it supports both horizontal and vertical antenna configurations, essential for high-capacity base stations.
Recommandé
Phased Array Antenna Prototyping
The ADMV4821-EVAL enables rapid prototyping of phased array antennas for 5G and radar applications. The beamformer's 16 channels per polarization allow precise phase and amplitude control, which is critical for beam steering. The evaluation board provides a convenient platform to test antenna arrays without designing custom RF front-ends. Its 50-ohm single-ended ports simplify connection to antenna elements, and the SDP-S controller allows software-based beamforming algorithm development.
Recommandé
Beamforming Algorithm Validation
Engineers use the ADMV4821-EVAL to validate beamforming algorithms in real hardware. The board's 16 TX and 16 RX channels provide a realistic testbed for algorithms that optimize signal-to-noise ratio and interference rejection. The dual-polarization capability allows testing of polarization diversity techniques. The SDP-S controller enables fast iteration of firmware and software, making it ideal for research and development of advanced beamforming strategies.
Recommandé
Test and Measurement Equipment
The ADMV4821-EVAL can be used in test and measurement setups to characterize beamformer performance, such as gain, phase, and error vector magnitude (EVM). Its wide frequency range and dual-polarization support make it suitable for automated test systems. The board's 50-ohm interfaces are compatible with standard RF test equipment, and the SDP-S controller provides a stable control interface. This allows for repeatable measurements in production test environments.
Recommandé
Satellite Communication Systems
The ADMV4821-EVAL is applicable to satellite communication systems operating in the 24-29.5 GHz range, such as Ka-band downlinks. The beamformer's dual-polarization and 16 channels enable high-throughput satellite terminals. The evaluation board allows engineers to test the ADMV4821 in a controlled environment before integrating into a full system. Its integrated LDOs ensure clean power, which is critical for maintaining signal integrity in space-grade applications.
Recommandé
Radar Systems
The ADMV4821-EVAL can be used to develop radar systems that operate in the 24-29.5 GHz band, such as automotive radar and imaging radar. The beamformer's 16 channels allow for high-resolution beamforming, which is essential for target detection and imaging. The evaluation board provides a flexible platform to test radar waveforms and signal processing algorithms. Its dual-polarization capability enhances radar performance in cluttered environments.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour ADMV4821-EVAL — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | ADMV4821-EVALZ | ADMV4801-EVALZ | PE188200A-Z |
|---|---|---|---|---|
| Package | Evaluation Board | Evaluation Board | Evaluation Board | Evaluation Board |
| Brand | Analog Devices | Analog Devices | Analog Devices | pSemi |
| Number of Channels | 16 TX / 16 RX | 16 TX / 16 RX | 16 TX / 16 RX | 8 channels |
| Polarization | Dual | Dual | Single | Dual |
Principaux différenciateurs
- Dual polarization support (vs ADMV4801-EVALZ)
- 16 TX and 16 RX channels (vs PE188200A-Z)
- Integrated LDO regulators and level shifters (vs PE188200A-Z)
Notes de conception
The ADMV4821-EVAL requires a 5V supply and uses on-board LDO regulators to provide clean power to the beamformer. Ensure the supply is stable and free of noise to avoid degrading RF performance. The SDP-S controller board is powered via USB, but the RF section should be powered separately to prevent digital noise coupling.
The evaluation board is designed with 50-ohm impedance matching for all RF ports. When connecting external antennas or test equipment, use high-quality RF cables and connectors to maintain signal integrity. Avoid long cable runs at 24-29.5 GHz to minimize losses.
Ensure the SDP-S controller is properly connected and recognized by the software before powering the board. Incorrect power sequencing can damage the beamformer. Refer to the user guide UG-1564 for detailed setup instructions and software configuration.
Informations de conformité
RoHS compliance inferred from ADI standard practice; not explicitly stated in provided data.
