उत्पाद (44,000+)

MOS6581 - 3-Voice FM Synthesizer Sound Chip | Commodore MOS | C64 Audio
MOS6581

MOS6581 - 3-Voice FM Synthesizer Sound Chip | Commodore MOS | C64 Audio

The Commodore MOS 6581 (SID - Sound Interface Device) is a single-chip, 3-voice electronic music synthesizer and sound-effects generator originally designed for the Commodore 64 home computer. It combines three independently programmable analog oscillators, an analog multimode resonant filter, and per-voice ADSR envelope generators on a single NMOS die, all addressed through a memory-mapped register file compatible with the 65XX microprocessor family used in the C64, C128, and CBM-II series. A sound chip (or programmable sound generator, PSG) is a dedicated semiconductor that synthesizes audio under CPU control, sitting between the system bus and the analog output stage. SID belongs to the family of analog synthesis ICs - alongside later digital successors such as the Yamaha YM2149 and General Instrument AY-3-8910 - and is notable for being one of the first single-chip devices to combine subtractive synthesis (oscillators + filter) with programmable waveforms in a consumer computer. Key features of the MOS6581 include three independent voices each offering four selectable waveforms (triangle, sawtooth, variable-pulse, and noise), a 12-bit frequency resolution per voice, a global 4-bit volume control with four volume modes, and three analog filter modes (low-pass, high-pass, band-pass, plus notch combinations). The chip's signature warm, slightly distorted sound comes from its analog filter, which has become a defining audio characteristic of the Commodore 64 and a sought-after timbre in chiptune and electronic music production. Typical applications include the original Commodore 64/128 sound subsystem, chiptune music hardware and software synthesizers, retro-computing restoration boards, MIDI-to-SID adapter projects, and educational tools for teaching subtractive synthesis. Modern FPGA implementations such as those in the MiSTer platform reproduce the analog behavior bit-true, while the ARMSID and SIDKick Pico devices provide plug-compatible physical replacements. When designing with the MOS6581, engineers must consider that it draws power directly from the host computer's 5V and 12V rails and produces significant analog heat during operation. Replacement or refurbishment boards such as ARMSID and SIDKick Pico offer lower noise and modern reliability while retaining register-level compatibility with the original chip.

RFQ संपर्क
MP1720DH-12-LF-P - 2.7W Class-D Mono Amplifier | MPS
MP1720DH-12-LF-P

MP1720DH-12-LF-P - 2.7W Class-D Mono Amplifier | MPS

Monolithic Power Systems MP1720DH-12-LF-P is a 2.7 W mono Class-D low-EMI, high-efficiency audio amplifier with a full-bridge output structure, designed to drive a 4 Ω speaker and housed in a 10-MSOP-EP package. The verified manufacturer information identifies 90% efficiency, integrated 250 mΩ power MOSFETs at VIN = 3.3 V, startup/shutdown pop elimination, and short-circuit protection. A Class-D audio amplifier is a switching power amplifier that converts a low-power analog input into a differential speaker drive. The MP1720 belongs to the Class-D amplifier hierarchy, where efficiency and low electromagnetic interference are priorities for portable consumer audio. Its full-bridge topology eliminates the need for an external output coupling capacitor while maintaining the high-fidelity characteristics associated with Class-AB amplification. The principal performance features include 2.7 W output into a 4 Ω speaker, approximately 90% efficiency, and integrated 250 mΩ MOSFETs. Low-EMI operation is especially useful in compact products containing sensitive wireless, audio, or control circuitry. Startup and shutdown pop elimination improves listening behavior by reducing transient disturbances, while short-circuit protection improves fault tolerance in portable audio systems. The MP1720 architecture integrates the power stage, control electronics, and protection functions into one package. According to the Monolithic Power Systems MP1720 product page, the integrated MOSFETs have an on-resistance of 250 mΩ when VIN is 3.3 V. This integration reduces external component count and board area, although actual acoustic performance still depends on the speaker impedance, supply voltage, PCB grounding, input filtering, and output-loop layout. Typical uses include compact Bluetooth speakers, portable audio players, personal audio devices, sound bars, notification speakers, and small embedded audio modules. The 10-MSOP-EP package supports compact board layouts, while the exposed-pad construction provides a thermal path for the internal switching stage. The manufacturer specifically recommends low-voltage-coefficient tantalum, aluminum electrolytic, or suitable ceramic supply capacitors. The primary design consideration is switching-node layout. Keep the MP1720 output loop compact, provide a low-impedance ground path, place input and supply capacitors close to their associated pins, and avoid routing sensitive audio signals beneath the amplifier or switching nodes. Incorrect output filtering or capacitor selection can increase EMI and audio distortion even when the nominal 2.7 W output rating is met. This product record consolidates the verified distributor classification, manufacturer performance claims, family alternatives, and application-specific design guidance into one engineering reference. It distinguishes confirmed capabilities from specifications that still require confirmation from the complete manufacturer datasheet before a production design is released.

RFQ संपर्क
MP1720DH-216-LF - 2.7W Mono Class-D Audio Amplifier | Monolithic Power Systems
MP1720DH-216-LF

MP1720DH-216-LF - 2.7W Mono Class-D Audio Amplifier | Monolithic Power Systems

The Monolithic Power Systems MP1720DH-216-LF is a mono Class-D audio power amplifier that delivers 2.7 W into a 4 ohm speaker from a 2.5 V to 5.5 V supply, packaged in a 10-pin MSOP with exposed pad (MSOP-EP, MO-187BA-T). It uses a full-bridge (BTL) output structure so no output coupling capacitors are required, and it operates at up to 90% efficiency with integrated 250 mOhm power MOSFETs rated at VIN = 3.3 V. A Class-D amplifier is a switching power stage whose output MOSFETs are driven fully on and fully off, so the transistor dissipates very little power compared with a linear Class-AB stage. In the product-type hierarchy, the MP1720 sits as an audio power amplifier within amplifier ICs, inside the broader power management and signal-conditioning IC category, sitting functionally below a Class-AB or Class-AB/D hybrid amplifier. Key features include a pin-selectable 1 MHz or 1.3 MHz switching frequency or synchronization to an external clock source, an internal EMI-reduction scheme that removes the need for an output LC filter while still passing emission standards, and startup/shutdown pop elimination for clean audible start. On-chip short-circuit and thermal overload protection remove the need for external fault handling, and five fixed gain options let the designer avoid external gain-setting networks in most designs. The 20 kHz closed-loop bandwidth matches typical Class-D performance for compact speakers, while the filterless full-bridge drive reduces board area and external component count in portable audio products. The exposed pad ties to ground and carries the majority of the dissipation path, so thermal design of the PCB copper pour is the primary layout consideration. Typical applications include compact Bluetooth and portable speakers, USB-C audio dongles, notification and alert speakers in smart-home devices, headphone and game-console accessories, and small industrial or automotive auxiliary audio modules where a 2.5 V to 5.5 V rail is available. When designing around the MP1720, keep the input and decoupling capacitors close to their pins, provide adequate copper under the exposed pad, and confirm that the selected fixed-gain option matches the sensitivity of the source. Because the part is a switching amplifier, place it away from sensitive analog or RF traces to limit switching-node coupling. This page consolidates manufacturer and distributor information into a practical engineering reference, including parameter-by-parameter comparison against same-family MPS drop-in options, design notes for EMI and thermal layout, and application guidance that is not present on a standard distributor listing page.

RFQ संपर्क
MP1720DH-216-LF-P - 2.7W Class D Audio Amplifier | MPS
MP1720DH-216-LF-P

MP1720DH-216-LF-P - 2.7W Class D Audio Amplifier | MPS

The Monolithic Power Systems MP1720DH-216-LF-P is a mono Class D audio amplifier rated to deliver 2.7 W into a 4 Ω speaker from a 2.5 V to 5.5 V supply. It is packaged in a 10-pin MSOP with exposed pad and uses a full-bridge output structure. Its switching frequency can be selected as 1 MHz or 1.3 MHz or synchronized to an external clock, while an integrated EMI-reduction scheme supports low-emission operation without an output LC filter. A Class D amplifier is a switching audio amplifier that drives a speaker with a differential full-bridge waveform. This architecture places the amplifying devices in an efficient power-conversion path, allowing high output power with less heat than a conventional linear Class AB amplifier when operating near its rated load. The MP1720 family also provides startup and shutdown pop suppression, short-circuit protection, and thermal-overload protection. The verified manufacturer information identifies up to 90% efficiency, internal 250 mΩ power MOSFETs at a 3.3 V supply, five fixed-gain options, and a -40 °C to +85 °C operating-temperature range. These characteristics suit portable speakers, compact consumer audio products, and low-voltage equipment where battery efficiency, EMI control, and thermal performance are important. The exposed-pad MSOP package helps transfer heat into the PCB rather than isolating the amplifier in a thermally constrained enclosure. At the device level, the MP1720 supports a 20 kHz bandwidth, a single audio channel, and a supply voltage range of 2.5 V to 5.5 V. The -216 suffix identifies a particular fixed-gain implementation within the five-option MP1720 family. Distributor listings classify the device as a 1-channel, mono Class D amplifier and report output power as 2.7 W or 2.78 W depending on the listing convention. The switchable operating frequency is especially useful in compact audio systems because it provides flexibility between internal EMI optimization and synchronization with a shared system clock. Designers should preserve the manufacturer-recommended input, output, power-ground, and exposed-pad connections. The thermal pad must be tied to the appropriate ground plane and connected with adequate copper and vias so that heat can leave the package efficiently. The main design trade-off is that Class D switching outputs can introduce high-frequency electromagnetic energy and distortion products that require careful PCB routing. The MP1720 addresses these concerns with selectable carrier frequency, external synchronization, and integrated EMI reduction, but speaker traces, input routing, grounding, and decoupling still need disciplined implementation. This product page consolidates verified manufacturer and distributor information, package details, procurement sources, and design-oriented application guidance. It also distinguishes the confirmed family candidate from unverified cross-brand replacements so engineers can make PCB-compatibility decisions without treating merely similar audio amplifiers as drop-in parts.

RFQ संपर्क
MP1720DH-216-LF-Z - 2.7W Mono Class D Audio Amplifier | MPS
MP1720DH-216-LF-Z

MP1720DH-216-LF-Z - 2.7W Mono Class D Audio Amplifier | MPS

The Monolithic Power Systems Inc. MP1720DH-216-LF-Z is a mono Class D audio amplifier IC capable of delivering 2.7 W into a 4 Ω speaker, with a 10-MSOP-EP package. It uses a full-bridge output structure and is designed for high-efficiency audio playback with Class AB-like fidelity. The manufacturer identifies a typical efficiency of 90%, low EMI operation, selectable 1 MHz or 1.3 MHz switching frequencies, and flexible external synchronization for noise-control applications. A Class D audio amplifier is a switching power amplifier that uses pulse-width-modulated output stages rather than continuously biased linear output transistors. The MP1720 integrates 250 mΩ power MOSFETs for VIN = 3.3 V, startup and shutdown pop elimination, short-circuit protection, thermal-overload protection, and EMI-reduction circuitry. Its integrated filtering approach can eliminate the need for an output LC filter in suitable designs, helping reduce board area and simplify compact speaker-drive layouts. The MP1720 family provides five fixed gain options and supports both internally selected and externally synchronized switching frequencies. The -216-LF-Z ordering code identifies the 10-MSOP-EP package, while the -Z suffix identifies the specific variant provided by the verified distributor listing. The exposed-pad package helps remove heat from the Class D output circuitry, although layout and thermal design still determine reliable performance. Typical uses include portable speakers, compact consumer audio products, voice-enabled devices, sound bars, USB or battery-powered audio accessories, and small industrial or monitoring systems. The 2.7 W output capability is appropriate for low-impedance speakers in space-constrained products where efficiency, EMI control, and short solution size are more important than a high-power audio output stage. Designers should follow the manufacturer recommended input, output, and feedback connections, place the exposed thermal pad on a copper pour, and validate EMI behavior in the final enclosure and cable configuration. The MP1720DH-216-LF-Z is also identified as RoHS compliant by the verified component listing, while detailed lead-free, REACH, AEC-Q100, and halogen-free status require confirmation from current manufacturer documentation.

RFQ संपर्क
MP1720DH-3-LF-P - 2.7W Mono Class-D Amplifier | MPS
MP1720DH-3-LF-P

MP1720DH-3-LF-P - 2.7W Mono Class-D Amplifier | MPS

The Monolithic Power Systems MP1720DH-3-LF-P is a 2.7 W mono Class-D audio amplifier capable of delivering 2.7 W into a 4-ohm speaker. The device uses a full-bridge output structure and is packaged in a 10-pin MSOP with an exposed pad. It combines high efficiency with low electromagnetic interference and supports a 1 MHz or 1.3 MHz switching-frequency selection. A Class-D audio amplifier is a switching power amplifier whose output stage rapidly switches between the supply rails. Compared with a linear Class-AB amplifier, this approach improves power efficiency because the output transistors spend more time in the low-dissipation states. The MP1720 adds EMI-reduction circuitry intended to suppress switching-related emissions without requiring an output LC filter. The MP1720 provides five fixed-gain options, selectable according to the MP1720 ordering information, and the -3 variant identifies one of those gain configurations. Its switching frequency can be selected between 1 MHz and 1.3 MHz using a control pin or synchronized to an external clock source. These features support compact speaker designs where radiated emissions, audible artifacts, and supply-rail noise must be controlled simultaneously. Internally, the full-bridge topology develops a differential speaker drive, removing the need for a DC-blocking output capacitor when the amplifier operates in Bridge-Tied-Load configuration. Short-circuit and thermal-overload protection are specified for the device. The exposed pad provides a thermal path from the amplifier to the PCB, making copper-pour area and thermal via layout important during continuous high-power playback. Typical uses include portable speakers, consumer audio accessories, voice-enabled devices, sound bars, and compact Bluetooth speaker systems. It is particularly suitable where a 4-ohm load and moderate output power are required without introducing the heat and idle power associated with a Class-AB output stage. An external input coupling, output filtering, and speaker interface may still be required according to system-level EMI and safety requirements. Designers should verify the -3 gain setting against the source impedance and preamp architecture, reserve sufficient input and output capacitors close to the device, and connect the exposed pad to a low-impedance ground plane. When radiated-emission testing fails, switching-frequency adjustment or synchronization should be evaluated before adding an output filter. This page combines the verified distributor identity, the manufacturer MP1720 family information, package-level comparison data, same-family alternatives, and practical Class-D layout guidance. It is intended to help engineers identify sourcing, electrical-fit, and layout implications beyond the basic distributor listing.

RFQ संपर्क
MP1720DH-9-LF-Z - 2.7W Mono Class-D Amplifier | MPS
MP1720DH-9-LF-Z

MP1720DH-9-LF-Z - 2.7W Mono Class-D Amplifier | MPS

The Monolithic Power Systems MP1720DH-9-LF-Z is a 2.7 W mono Class-D audio amplifier with a 2.5 V to 5.5 V supply range, 90% typical efficiency, and a 10-MSOP exposed-pad package. It uses a full-bridge output structure to drive a 4 Ω speaker while combining Class-D efficiency with Class-AB-like audio fidelity. A Class-D audio amplifier is a switching power amplifier that converts a differential analog input into a high-frequency bridge output. Within the semiconductor hierarchy, it belongs to the Class-D amplifier family, audio amplifier ICs, analog and mixed-signal integrated circuits, and broader power-management and signal-processing systems. Its full-bridge output eliminates the need for a speaker-output coupling capacitor when the supported drive conditions are met. The MP1720 family provides selectable 1 MHz or 1.3 MHz switching frequencies and can be synchronized to an external clock source. Its integrated 250 mΩ power MOSFETs reduce external component count, while startup and shutdown pop elimination improves listening experience. The -9 suffix identifies the family's fixed-gain ordering option. Short-circuit and thermal-overload protection support robust operation in compact audio products. The MP1720DH-9-LF-Z can deliver 2.7 W into a 4 Ω speaker. A listed source also reports 2.78 W output power, reflecting a rounded or differently stated test condition. Its 20 kHz bandwidth and low-EMI design make it suitable for audio products requiring compactness and reduced filter requirements, although actual distortion, thermal performance, and output power must be checked against the manufacturer's test conditions. Typical uses include portable speakers, consumer audio accessories, compact soundbars, call-system speakers, and other low-voltage mono audio loads. The 10-MSOP exposed-pad package requires careful PCB layout for heat transfer, and the exposed pad must be connected to ground according to the manufacturer's land pattern and datasheet instructions. A key design consideration is the relationship between supply voltage, speaker impedance, and heat dissipation. Although Class-D topology improves efficiency, output-stage losses still become heat in the exposed pad. Place input, output, ground, and decoupling connections for low-loop-area routing, while using the recommended switching frequency to balance EMI, filtering, and thermal performance. This page combines manufacturer specifications, distributor availability, family-level drop-in alternatives, comparison data, and practical layout guidance. It distinguishes verified parameters from unavailable pricing, lead-time, and detailed pin-mapping information rather than filling gaps with unverified assumptions.

RFQ संपर्क
MP1720DQ-216-LF-P - 2.7W Mono Class-D Amplifier | MPS
MP1720DQ-216-LF-P

MP1720DQ-216-LF-P - 2.7W Mono Class-D Amplifier | MPS

Monolithic Power Systems MP1720DQ-216-LF-P is a 2.7 W mono Class-D audio amplifier with a full-bridge output, capable of delivering 2.7 W into a 4 Ω speaker while providing approximately 90% efficiency in a 10-QFN (3 x 3 mm) package. The amplifier integrates 250 mΩ power MOSFETs at VIN = 3.3 V and includes startup and shutdown pop elimination, short-circuit protection, and low-EMI operation. A Class-D amplifier is a switching audio-output stage whose transistor network continuously drives the speaker load. Its class hierarchy is Class-D amplifier → audio power amplifier → amplifier IC → analog and power-management semiconductor. Unlike a conventional linear Class-AB output stage, the MP1720 converts supply energy into audio output more efficiently, reducing heat and allowing a compact solution for portable and embedded speakers. The verified manufacturer information identifies the MP1720 family as a high-efficiency, low-EMI Class-D audio amplifier. Its full-bridge topology supports a 2.7 W output into 4 Ω, while the stated 90% efficiency helps lower power consumption and board-space requirements. Integrated 250 mΩ MOSFETs at a 3.3 V supply reduce the need for external output power devices, and the available protection and pop-elimination features support practical speaker interfaces. The MP1720DQ-216-LF-P is identified by distributors as a one-channel mono Class-D amplifier in a 10-QFN package measuring 3 x 3 mm. A QFN package places leadless terminals around the perimeter and can use an exposed thermal pad. Its small footprint is particularly useful where PCB area is constrained, although correct land-pattern design, exposed-pad soldering, thermal management, and input/output filtering remain essential. Typical uses include compact speaker drivers in portable consumer equipment, personal audio products, mobile accessories, embedded control systems, and small industrial or automotive accessories where a 2.7 W mono output is sufficient. The BTL full-bridge output allows the amplifier to drive a speaker without a conventional output coupling capacitor when configured according to the manufacturer recommendations. The exact input filter, gain-setting method, output-filter requirements, and maximum supply voltage must be confirmed from the manufacturer datasheet before layout. For implementation, use the manufacturer-recommended input and output filtering network, place the amplifier close to the speaker connection, and provide adequate exposed-pad copper for thermal dissipation. EMI performance depends on correct grounding, short output routing, controlled input impedance, and proper filter placement. Verify speaker impedance and power limits during prototype testing because an incorrect load or filter implementation can increase distortion, heat, or radiated emissions. This product page consolidates verified manufacturer and distributor information for the MP1720DQ-216-LF-P, adds practical engineering guidance, and explicitly separates confirmed facts from parameters that still require datasheet confirmation. It also documents the absence of a verified, pin-compatible substitute rather than presenting unverified cross-brand parts as drop-in replacements.

RFQ संपर्क
MP1720DQ-216-LF-Z - 2.7W Mono Class-D Amplifier | MPS
MP1720DQ-216-LF-Z

MP1720DQ-216-LF-Z - 2.7W Mono Class-D Amplifier | MPS

Monolithic Power Systems MP1720DQ-216-LF-Z is a 2.7 W mono Class-D audio amplifier with a 2.5 V to 5.5 V supply range and 90% efficiency, housed in a 10-QFN 3 mm by 3 mm package with exposed pad. It uses a full-bridge output structure to drive a 4 ohm speaker and combines Class-D efficiency with Class-AB-like audio fidelity. A Class-D audio amplifier is a switching power amplifier whose output MOSFETs rapidly alternate between fully enhanced and off states. This approach reduces output-stage dissipation compared with a linear Class-AB amplifier. The MP1720 belongs to the broader audio amplifier IC, analog amplifier, signal-conditioning IC, and power management semiconductor hierarchies. It is intended for compact speaker systems operating from low-voltage supplies. Key features include 2.7 W output into a 4 ohm speaker, up to 90% efficiency, integrated 250 milliohm power MOSFETs when operated from a 3.3 V supply, and a 20 kHz bandwidth. Startup and shutdown pop elimination, short-circuit protection, and thermal protection are integrated. These protections and features are intended to simplify portable audio designs while preserving a small package footprint. The MP1720's full-bridge topology produces a differential output across the speaker terminals. This architecture allows efficient delivery to a 4 ohm load without requiring a conventional Class-AB output stage. The specified 2.5 V to 5.5 V operating range supports supply systems built around lithium-cell, portable-device, and low-voltage USB-related rails, although system-level compatibility must include inrush, peak-current, and USB source-current requirements. Typical uses include compact Bluetooth speakers, portable speakers, soundbars, consumer audio accessories, voice-assistant speakers, and other low-voltage audio products. The 3 mm by 3 mm QFN package is particularly useful where PCB area is constrained, while its exposed pad requires careful thermal design and PCB-layout attention. Designers should place the input, supply, output, and decoupling components as close as practical to the device, verify the speaker impedance and power requirements, and provide adequate thermal coupling through the exposed pad. A Class-D amplifier does not reproduce DC, and correct input grounding and output filtering remain essential for low-noise operation. The available source data does not provide a complete verified pin map, so the package pinout is not asserted here. This page consolidates the verified manufacturer and distributor information, distinguishes confirmed specifications from unavailable parameters, and provides practical application and design guidance beyond the basic ordering data. Pricing, lead time, detailed pin mapping, and verified drop-in substitutes remain subject to current distributor confirmation.

RFQ संपर्क
MP1720DQ-3-LF-P - 2.7W Class-D Mono Amplifier | MPS
MP1720DQ-3-LF-P

MP1720DQ-3-LF-P - 2.7W Class-D Mono Amplifier | MPS

The Monolithic Power Systems MP1720DQ-3-LF-P is a 2.7 W mono Class-D audio amplifier that uses a full-bridge output structure to drive a 4 Ω speaker. The verified manufacturer and distributor results identify a surface-mount 10-QFN package measuring 3 mm by 3 mm, along with integrated 250 mΩ power MOSFETs operated from a 3.3 V supply. The device combines switching-class efficiency with the high-fidelity character associated by the manufacturer with a Class AB amplifier. A Class-D audio amplifier is a power-management semiconductor that converts an analog audio input into a high-frequency switching output capable of driving a loudspeaker efficiently. Within the broader hierarchy, it is an audio amplifier IC, a power-management IC, and a semiconductor. Unlike a conventional linear Class AB output stage, the MP1720 uses a switching full-bridge architecture, reducing the amount of power dissipated as heat while delivering audio energy to the speaker. The MP1720 integrates the 250 mΩ power MOSFETs, startup and shutdown pop-elimination circuitry, and short-circuit protection. According to the Monolithic Power Systems MP1720 product result, these functions allow a compact audio-output solution with reduced external component count. The stated 90% efficiency is especially relevant in portable audio products where amplifier dissipation directly affects battery life and enclosure temperature. The exact efficiency conditions, thermal ratings, and protection thresholds require confirmation from the manufacturer datasheet. The full-bridge output can drive a single 4 Ω speaker at up to 2.7 W. Because the output is bridge-tied, the speaker receives the differential voltage generated between the two output nodes. Designers must keep the BTL speaker wiring isolated from system ground and should use a speaker return path that satisfies the requirements of the application. Feedback and input filtering details should be implemented with the component values and topology shown in the official MP1720 documentation. Typical uses include compact Bluetooth speakers, portable speakers, sound bars, consumer audio modules, and other low-voltage embedded audio products. The 3.3 V supply and 2.7 W output rating align well with battery-powered equipment whose speaker impedance is 4 Ω. A system requiring higher output power, a different supply voltage, stereo operation, or a different pinout should not be treated as a direct replacement without a complete electrical comparison. The primary design considerations are exposed-pad layout, input and output filtering, speaker return routing, thermal performance, and startup behavior. Place the device close to the speaker connector to minimize switching-node trace length, and provide a continuous low-impedance ground plane around the exposed pad. Decoupling and passive-component values must be confirmed against the official datasheet and typical application circuit. This page separates verified MP1720DQ-3-LF-P facts from unverified details. It combines the manufacturer product information, distributor packaging data, replacement-search findings, and engineering guidance without inventing pin assignments, thermal figures, compliance declarations, or prices that were not present in the supplied source data.

RFQ संपर्क
MP1720DQ-3-LF-Z - 2.7W Mono Class-D Audio Amplifier
MP1720DQ-3-LF-Z

MP1720DQ-3-LF-Z - 2.7W Mono Class-D Audio Amplifier

Monolithic Power Systems, Inc. MP1720DQ-3-LF-Z is a 2.7 W mono Class-D audio amplifier with a full-bridge output, a 90% efficiency rating, and a 10-QFN (3x3 mm) surface-mount package. The device is designed to drive a 4-ohm speaker while combining Class-D efficiency with Class-AB-like audio fidelity. Its low-EMI architecture, integrated protection, and compact footprint support portable audio, consumer audio, and compact speaker applications. A Class-D audio amplifier is a switching-based amplifier that converts a low-level analog input into a high-frequency pulse-width-modulated output. Its full-bridge output stage applies differential voltage to the speaker, increasing usable output voltage and efficiency. In the broader hierarchy, this MP1720 belongs to the amplifier-IC category within integrated circuits and provides a more efficient speaker-drive solution than a conventional linear Class-AB output stage. The MP1720 delivers up to 2.7 W into a 4-ohm speaker while maintaining an efficiency of approximately 90%. Its integrated power MOSFETs have an on-resistance of 250 milliohms when operated from a 3.3 V supply, reducing conduction loss in compact systems. The low-EMI design is intended to simplify coexistence with sensitive analog, radio, or digital circuitry. Startup and shutdown pop-elimination circuitry further improves the listening experience during power transitions. The integrated feature set includes short-circuit protection, thermal protection, and depop circuitry. These protections are important in portable and consumer products where a speaker cable fault, restricted enclosure, or sudden power transition can otherwise damage the amplifier or produce unwanted noise. The 3x3 mm QFN package also minimizes board area, although its exposed thermal construction requires careful layout and adequate copper for heat transfer. Typical uses include portable speakers, Bluetooth speaker accessories, compact consumer audio products, USB-powered audio systems, and small alarm or notification devices. In a 4-ohm speaker design, the MP1720 provides substantially more output power than a conventional low-power analog headphone amplifier. Its 90% efficiency also reduces the power drawn from a battery or USB supply compared with a linear amplifier operating at a similar output level. PCB design should preserve the manufacturer’s recommended input, supply, and filtering networks, provide a low-impedance ground path, and maintain adequate thermal copper beneath the package. Because Class-D output stages contain high-frequency switching energy, output routing should remain short and isolated from sensitive input or clock signals. Verify the loudspeaker load, supply limits, thermal conditions, and output-filter requirements before production release. This product record combines the verified manufacturer specifications, distributor listings, lifecycle information, package data, and available replacement information. It also identifies where pricing and detailed pin-level data were not available, preventing unverified assumptions from being presented as guaranteed design values.

RFQ संपर्क
MP1740EC-LF-P - 3W Mono Class-D Amplifier | MPS
MP1740EC-LF-P

MP1740EC-LF-P - 3W Mono Class-D Amplifier | MPS

Monolithic Power Systems MP1740EC-LF-P is a 3 W high-efficiency mono Class-D audio amplifier with a 91% efficiency rating and a 9-WLCSP package measuring 1.55 mm by 1.55 mm. It uses a full-bridge output structure to drive 4-ohm speakers and provides 2 V/V gain. The device is designed for compact audio systems where high output efficiency, small size, and direct speaker drive are important. A Class-D audio amplifier is a switching power amplifier that uses a full-bridge H-bridge output to deliver energy to a speaker. Compared with a linear Class-AB amplifier, its Class-D topology can reduce amplifier power loss and improve operating efficiency. The MP1740 combines that efficiency with the audio fidelity associated with Class-AB operation, while its 2 V/V default gain can be changed by selecting different input resistors. The principal verified features include 3 W output into a 4-ohm speaker, 91% efficiency, mono Class-D operation, a full-bridge output, and a 1.55 mm by 1.55 mm WLCSP package. The manufacturer page identifies the MP1740 as a low-power mono BTL Class-D audio amplifier and identifies EV1740EC-00A as its evaluation board. These characteristics make the device suitable for portable speakers, compact consumer audio, and embedded audio products. Because the MP1740 uses a BTL output, the speaker connections are not referenced to ground in the same way as a conventional single-ended amplifier. PCB layout, speaker impedance, input filtering, supply decoupling, and thermal performance must be reviewed against the manufacturer documentation. The 1.55 mm by 1.55 mm WLCSP also requires assembly capability and careful land-pattern design. Typical designs place the amplifier near the speaker connector, connect the differential Class-D outputs to the speaker, and bypass the supply close to the device. The amplifier's 91% efficiency means less power is dissipated internally than with a comparable linear amplifier at the same stated operating point, but speaker loading and supply conditions still determine actual thermal and acoustic performance. The MP1740 is therefore most appropriate when a compact, efficient, mono speaker drive solution is required. This page combines the verified manufacturer and distributor descriptions with practical design guidance, comparison fields, procurement context, and application-oriented engineering information. It does not infer unverified electrical limits, pin names, pricing values, lifecycle claims, or compliance declarations.

RFQ संपर्क
MP1740EC-LF-Z - 3W Mono Class-D Amplifier | MPS
MP1740EC-LF-Z

MP1740EC-LF-Z - 3W Mono Class-D Amplifier | MPS

Monolithic Power Systems MP1740EC-LF-Z is a 3 W high-efficiency mono Class-D audio amplifier IC with a full-bridge H-bridge output, 9-WLCSP package measuring 1.55 mm by 1.55 mm, and support for driving a 4 ohm speaker. It delivers Class-AB-like audio fidelity with reported efficiency of 91%, making it suitable for compact, battery-powered audio products where energy efficiency and board area are important. The verified distributor data identifies it as a one-channel Class-D amplifier rated for 3.62 W in one distributor listing and 3 W in the product description. A Class-D audio amplifier is a switching amplifier that uses an H-bridge to deliver energy to a speaker with high efficiency compared with a conventional linear Class-AB amplifier. The MP1740 is intended for mono audio signal paths where a small speaker load must be driven from a compact integrated circuit. Its switching output stage reduces wasted power during audio playback, which is particularly useful in portable speakers, personal audio products, and compact consumer equipment. The 9-WLCSP footprint also supports dense PCB layouts when component area is limited. The main verified parameters are 3 W output power into a 4 ohm speaker, mono Class-D operation, a full-bridge H-bridge architecture, 91% efficiency, and a 1.55 mm by 1.55 mm 9-WLCSP package. The verified sources also identify the part as a one-channel audio amplifier IC. Detailed electrical limits, gain settings, input impedance, output configuration, protection behavior, thermal limits, and pin assignments are not included in the supplied data and must be confirmed from the manufacturer datasheet before design release. The device is best suited to portable speakers, compact Bluetooth speaker systems, small consumer audio products, and low-power mono audio nodes. In these applications, the amplifier converts an analog audio signal into a full-bridge Class-D output for the connected speaker. The verified 91% efficiency figure indicates a favorable power-conversion characteristic, but actual battery life depends on the complete system, load impedance, output level, thermal environment, and PCB layout. Designers should pay particular attention to the tiny WLCSP footprint, speaker connection, input routing, bypass capacitors, power-supply stability, and thermal performance. Because the available evidence does not provide a complete pinout or application-circuit parameters, consult the official MP1740EC datasheet for pin names, exposed-pad requirements, recommended inductors or capacitors, input configuration, output filtering, and maximum operating conditions. This product page synthesizes verified distributor and manufacturer-linked descriptions with application guidance and identifies where additional datasheet data is required. The MP1740EC-LF-Z should not be treated as a complete electrical substitute until package, pin, gain, protection, and thermal compatibility have been independently checked.

RFQ संपर्क
MP2736DQG-LF-P - 450mΩ Dual SPDT Analog Switch | MPS
MP2736DQG-LF-P

MP2736DQG-LF-P - 450mΩ Dual SPDT Analog Switch | MPS

The Monolithic Power Systems MP2736DQG-LF-P is a low-voltage, 450 mΩ dual single-pole double-throw monolithic CMOS analog switch operating from 1.65 V to 5.5 V in a 10-QFN package measuring 1.4 mm by 1.8 mm. It provides two 2:1 switch circuits with bidirectional signal paths, low-power operation, fast switching, and glitch-free behavior. An analog switch is an integrated semiconductor device that routes signals between circuit nodes under digital control. The SPDT topology connects one common terminal to one of two selectable terminals, allowing one signal source to be steered between two destinations. A dual SPDT switch contains two independently controlled 2:1 paths. Within the device hierarchy, the MP2736DQG-LF-P is an analog switch IC, a member of the broader interface IC category used for signal routing and multiplexing. Key features include a low on-resistance of 450 mΩ, a single-supply operating range of 1.65 V to 5.5 V, and a specified operating temperature range from -40°C to +85°C. The MP2736 family combines low power consumption, high switching speed, low on-resistance, and a small package. Its two switching circuits and common enable architecture suit compact portable and battery-powered equipment where PCB area and supply current are important constraints. The MP2736 is implemented as a monolithic CMOS analog switch, allowing low-voltage operation and efficient signal routing. Switching times of 35 ns and 36 ns are specified in the verified product information, supporting applications that cannot tolerate lengthy transition intervals. The available bandwidth reaches 50 MHz, while the 130 pF value identifies the relevant capacitance specification from the supplied source data. Because the switch is bidirectional, it can route signals in either direction when the electrical operating conditions remain within the device limits. Typical uses include battery-powered audio routing, portable test and measurement interfaces, communication-signal multiplexing, sensor-path selection, and general analog signal switching. The 10-QFN package provides a practical footprint for dense portable systems, while the 1.65 V to 5.5 V range covers common low-voltage rails. In each case, the design must account for signal amplitude, switching duration, off-state behavior, and the exact enable polarity and timing required by the application. A key design consideration is that low on-resistance does not eliminate all analog-switch limitations. Board leakage, connector resistance, and trace resistance can dominate a 450 mΩ path, while capacitive loading can influence switching performance. Designers should minimize sensitive traces, use a continuous ground reference, and verify signal integrity with the actual source impedance, load, supply voltage, and enable sequence before production release. This page consolidates verified manufacturer and distributor information, parameter comparisons, procurement context, and practical design guidance for engineers evaluating the MP2736DQG-LF-P as a low-voltage, low-resistance dual SPDT analog switch.

RFQ संपर्क
MP2736DQG-LF-Z - 0.45 Ohm Dual SPDT Analog Switch | MPS
MP2736DQG-LF-Z

MP2736DQG-LF-Z - 0.45 Ohm Dual SPDT Analog Switch | MPS

The Monolithic Power Systems MP2736DQG-LF-Z is a low-voltage, low-on-resistance, dual single-pole double-throw (SPDT) monolithic CMOS analog switch IC with a 450 mOhm on-resistance and a 10-QFN package measuring 1.4 mm by 1.8 mm. The device operates from 1.65 V to 5.5 V and is designed for high-performance switching of analog signals in portable, battery-powered, and other compact electronic systems. The MP2736 combines two independently controlled SPDT switches in one IC. Its monolithic CMOS construction supports low power consumption, high switching speed, low on-resistance, and small package size. The manufacturer identifies the MP2735/MP2736 family as suitable for portable and battery-power applications where analog signal routing must be compact and power efficient. The MP2736 uses an EN control input. According to the manufacturer datasheet information, all switches are placed in a high-impedance state when EN is high. This global enable behavior provides a defined off condition for both SPDT channels and can simplify system-level control when analog paths must be isolated. The dual SPDT arrangement supports selecting one of two signal sources per channel or routing a signal to one of two destinations, depending on the surrounding circuit topology. The 450 mOhm on-resistance specification is the key low-voltage analog switching parameter identified in the verified distributor listings. Lower on-resistance helps reduce signal attenuation and improves source-to-load drive capability, while the 1.65 V to 5.5 V operating range allows operation from a single low-voltage supply. The 10-QFN package is particularly useful in portable equipment where board area is constrained. The -Z ordering suffix is supplied in tape-and-reel packaging according to distributor product information. Typical applications include battery-powered sensor interfaces, portable measurement systems, audio routing, communication equipment, and compact analog signal-conditioning circuits. The EN pin can be used for power-down or signal-isolation control. Designers should verify the exact pin names, logic levels, switch configuration, and timing behavior against the MP2736 datasheet before finalizing a PCB layout. This page combines the verified manufacturer and distributor information with practical selection guidance, package details, and design considerations. It is intended to help engineers identify whether the MP2736DQG-LF-Z is suitable for a low-voltage analog-routing design and to distinguish it from unrelated switch functions or package-incompatible alternatives.

RFQ संपर्क
MP7720DP-LF - 20W Mono Class-D Audio Amplifier | MPS
MP7720DP-LF

MP7720DP-LF - 20W Mono Class-D Audio Amplifier | MPS

Monolithic Power Systems MP7720DP-LF is a 20 W mono Class-D audio amplifier with a 9.5 V to 24 V supply range, single-ended output, and an 8-pin PDIP package. It integrates 180 mΩ power MOSFETs, startup and shutdown pop-elimination circuitry, short-circuit protection, and mute or standby control to reduce external circuitry and board area. A Class-D audio amplifier is a switching power amplifier in an audio-signal hierarchy. Its output-stage transistors operate mainly in a switching state, allowing efficient power delivery compared with a traditional linear amplifier. The MP7720 uses a single-ended output structure intended for driving a mono speaker load and integrating the power stage, control functions, and protection features into one device. The principal verified ratings are 20 W output power, a 9.5 V minimum supply voltage, a 24 V maximum supply voltage, and an operating temperature range of -40 °C to 85 °C. The package is a lead-free plastic 8-DIP package, also identified in the supplied data as PDIP-8. The verified distributor listing describes the product as a 20 W Class-D mono single-ended audio amplifier. The integrated 180 mΩ power MOSFETs are intended to improve amplifier efficiency and reduce solution size. Startup and shutdown pop-elimination circuitry helps reduce audible clicks during state changes, while short-circuit protection adds a basic safeguard for the output stage. Mute and standby functionality supports controlled audio muting or power management, although exact timing, enable thresholds, and output-current limits require confirmation in the manufacturer datasheet. Typical applications include compact mono speakers, portable audio equipment, consumer audio products, small powered speaker systems, and auxiliary audio modules. The 9.5 V to 24 V supply range supports systems using higher-voltage audio rails, while the through-hole PDIP package can simplify prototype assembly and manual installation. Designers must still verify speaker impedance, power derating, thermal conditions, supply decoupling, and output filtering against the manufacturer data before production use. This product summary combines the verified manufacturer description, distributor specifications, package information, and engineering notes to support initial design selection. It does not replace the complete MP7720 datasheet, particularly for electrical limits, pin functions, thermal resistance, switching behavior, and application-specific compensation.

RFQ संपर्क
MP7720DS-LF - 20W Mono Class-D Audio Amplifier | MPS
MP7720DS-LF

MP7720DS-LF - 20W Mono Class-D Audio Amplifier | MPS

Monolithic Power Systems MP7720DS-LF is a mono 20W Class-D audio amplifier operating from 9.5V to 24V in an 8-pin SOIC package. It uses a single-ended output structure and integrates 180mΩ power MOSFETs, startup and shutdown pop-elimination circuitry, short-circuit protection, and mute or standby control. The -40°C to +85°C operating range and integrated protection suit compact audio systems where component count and board area must be controlled. A Class-D audio amplifier is a switching power amplifier that delivers audio through rapidly switched output transistors. Within the amplifier hierarchy, the MP7720 is an integrated audio power amplifier and power-management IC rather than a low-power signal amplifier. Its efficiency-oriented Class-D topology can deliver substantial audio output while reducing heat relative to a linear amplifier when operated within the manufacturer’s specified electrical and thermal limits. The MP7720’s primary verified specifications are 20W output power, a 9.5V to 24V supply range, and one mono channel. Its integrated 180mΩ power MOSFETs reduce the need for external output transistors. Additional functions include startup and shutdown pop elimination, short-circuit protection, and mute or standby operation. These features make the device relevant to mono speakers, compact consumer audio products, powered speakers, sound bars, and auxiliary audio modules. Technically, the single-ended output topology supports a compact implementation without requiring a full-bridge output stage. Short-circuit protection improves resilience when a speaker wiring fault occurs, while mute and standby provide external control for quiet power management. The manufacturer identifies the MP7720 as a second-generation fully integrated audio amplifier, emphasizing its integration of the power stage and control functions. Typical applications include powered speakers, compact stereo systems using one channel per module, sound bars, portable or dock-based speakers, and industrial audio products with a single speaker. The 24V upper supply limit is a key design constraint; higher-voltage amplifier modules are not automatically suitable replacements. Speaker impedance, output-filter selection, supply decoupling, thermal performance, and control sequencing must be checked against the manufacturer datasheet. For PCB design, keep input, supply, output, and ground paths compact and route power-current loops with low resistance. The switching output requires an appropriate EMI-conscious layout and the prescribed LC output filtering. Verify thermal rise at worst-case supply, load, and ambient conditions because a stated 20W capability does not remove board-level heat dissipation requirements. This page consolidates verified manufacturer and distributor information, pricing availability, replacement evidence, and practical implementation guidance for engineers evaluating the MP7720DS-LF.

RFQ संपर्क
MP7720DS-LF-Z - 20W Mono Class-D Amplifier | MPS
MP7720DS-LF-Z

MP7720DS-LF-Z - 20W Mono Class-D Amplifier | MPS

The Monolithic Power Systems MP7720DS-LF-Z is a mono 20 W Class-D audio amplifier operating from 9.5 V to 24 V, delivering 20 W into 4 ohms with 93% efficiency in an 8-SOIC package. It integrates 180 mΩ power MOSFETs, startup and shutdown pop elimination, short-circuit protection, mute/standby control, thermal protection, and shutdown functionality. The single-ended output structure is designed to reduce external component count and solution size. A Class-D audio amplifier is a switching power amplifier that uses pulse-width modulation to drive an output stage efficiently. The MP7720 belongs to the Class-D amplifier, audio power-amplifier, integrated audio-amplifier, and power-management semiconductor hierarchy. Its integrated MOSFET output stage allows a compact speaker-driver solution while maintaining high conversion efficiency. The verified specifications identify a 9.5 V to 24 V supply range, 20 W output at 4 ohms, 60 dB gain-related performance, 1.5 mA quiescent current, and a -40°C to +85°C operating range. The amplifier is specified for mono audio, with Class-D topology and single-ended output. Protection and control features reduce the need for additional external circuitry in suitable speaker applications. Typical uses include compact speaker systems, portable audio products, audio accessory designs, industrial sound equipment, USB-powered audio projects, and small consumer audio products. The 20 W rating is most relevant when the speaker impedance and supply conditions are verified against the manufacturer datasheet. Efficiency and thermal performance must be considered together because a Class-D amplifier can still dissipate meaningful heat at high output power. Designers should place the input, supply, and output decoupling capacitors according to the manufacturer reference circuit, keep the high-current output loop compact, and provide adequate copper for thermal dissipation. The output should be checked for correct startup and shutdown sequencing to minimize audible pops. This page consolidates verified distributor data, manufacturer information, cross-reference results, and application guidance for the MP7720DS-LF-Z.

RFQ संपर्क
MP7722DF-LF-Z - Stereo 2x20W Class-D Amplifier
MP7722DF-LF-Z

MP7722DF-LF-Z - Stereo 2x20W Class-D Amplifier

The Monolithic Power Systems MP7722DF-LF-Z is a stereo, single-ended Class-D audio amplifier delivering 2 x 20 W into 4 ohm speakers from a 9.5 V to 24 V supply. It uses a TSSOP-20 package and integrates 180 mOhm power MOSFETs, startup and shutdown pop elimination, short-circuit protection, and mute or standby control. The device is intended for compact, high-efficiency audio systems where two amplified speaker outputs are required without external output transistors. A Class-D audio amplifier is a power amplifier category that uses switching transistors to deliver energy to a speaker efficiently. Unlike a linear audio amplifier, a Class-D stage reduces internal power dissipation by rapidly switching the output between supply rails and filtering the resulting pulse-width-modulated waveform. MP7722 uses a single-ended output structure, making it suitable for portable speakers, consumer audio products, and powered speaker modules. The verified manufacturer data identifies the MP7722 as a second-generation fully integrated audio amplifier. Its integrated 180 mOhm MOSFETs reduce external component count and help simplify board layout. Startup and shutdown pop elimination improves user experience by limiting audible transients during power-state changes. Short-circuit protection adds robustness in speaker systems, while mute and standby functions provide control for system integration. The MP7722DF-LF-Z operates across a 9.5 V to 24 V supply range and is specified for output power up to 20 W per channel into 4 ohms. The verified specifications identify a -40 C to +85 C operating-temperature range and RoHS compliance. These details make the amplifier suitable for equipment operating across commercial and industrial temperature ranges, subject to proper layout, thermal management, and speaker-load verification. Typical applications include portable Bluetooth speakers, multimedia speaker systems, powered audio accessories, compact consumer audio products, and industrial alarm or announcement systems. The TSSOP-20 package is useful when board area is constrained, but the exposed-pad thermal path and output-current capability must be considered. Input filtering, speaker protection, decoupling, and amplifier shutdown sequencing should follow the manufacturer guidance. This product page combines verified manufacturer specifications, distributor availability references, application guidance, and design notes. It also distinguishes verified electrical data from parameters requiring an engineering datasheet review, avoiding unsupported assumptions about performance, pin names, pricing, or lifecycle status.

RFQ संपर्क
MP7731DF-LF-Z - 30W Mono Class-D Amplifier | MPS
MP7731DF-LF-Z

MP7731DF-LF-Z - 30W Mono Class-D Amplifier | MPS

Monolithic Power Systems MP7731DF-LF-Z is a mono Class-D audio amplifier rated for 5W to 30W output, with a 9.5V to 18V supply range and integrated 180mΩ power MOSFETs in a 20-pin TSSOPF-EP package. It uses a full-bridge output structure for bridged mono operation and integrates startup and shutdown pop elimination, short-circuit protection, and mute or standby control. The device operates from -40°C to +85°C and is identified as RoHS compliant. A Class-D audio amplifier is a switching power-conversion device that uses pulse-width modulation to reproduce an analog audio waveform at the speaker output. In a bridged mono configuration, the differential output can provide more voltage swing to a speaker than a conventional single-ended amplifier. The MP7731 belongs to the audio amplifier hierarchy and the broader integrated-circuit and power-management semiconductor categories. The principal feature of the MP7731DF-LF-Z is its 30W maximum mono output capability from a 9.5V to 18V supply. Integrating 180mΩ power MOSFETs reduces the need for external output transistors and simplifies the audio power stage. Startup and shutdown pop elimination helps suppress audible transients, while integrated short-circuit protection improves robustness in speaker-drive applications. Mute and standby modes support controlled power management. The full-bridge topology allows the amplifier to drive a speaker differentially, where the voltage applied across the speaker is the difference between the two switching outputs. This arrangement increases usable output-voltage swing for a given supply. The MP7731 is a second-generation fully integrated MPS audio amplifier, combining the switching output stage, protection functions, and control features in one 20-TSSOPF-EP device. Typical uses include portable speakers, consumer audio equipment, soundbars, multimedia systems, and other mono speaker drives operating from a 12V-class supply. It is particularly suitable where compact solution size is important and a bridged Class-D output provides an efficient way to deliver several watts to tens of watts of audio power. Designers should follow the manufacturer layout and filtering guidance, including correct inductor placement and the specified start winding orientation. Component values, thermal performance, output-filter selection, and speaker loading must be verified against the manufacturer datasheet before production release. The exposed-pad package also requires careful PCB thermal design. This product page consolidates the verified manufacturer features, distributor package information, operating limits, and same-family alternatives with practical selection and layout guidance. It distinguishes verified facts from fields that still require manufacturer confirmation, helping engineers evaluate the MP7731DF-LF-Z before requesting an engineering quotation.

RFQ संपर्क
MP7740DN-LF-Z - 15W Mono Class-D Audio Amplifier | MPS
MP7740DN-LF-Z

MP7740DN-LF-Z - 15W Mono Class-D Audio Amplifier | MPS

The Monolithic Power Systems MP7740DN-LF-Z is a mono 15W Class-D audio amplifier with a 9.5V to 36V supply range, integrated 250mΩ power MOSFETs, and short-circuit protection in an 8-pin SOIC package with exposed pad. It is designed to drive 4Ω speakers through a single-ended output structure while reducing board size and external power-stage complexity. A Class-D audio amplifier is a switching power amplifier that delivers audio energy through rapidly alternating output voltages. In the broader hierarchy, it is an audio amplifier, analog signal-processing IC, power-management semiconductor, and surface-mount device. Compared with a conventional linear amplifier, the MP7740 architecture is intended to reduce wasted power and heat while retaining the signal path required for compact speaker systems. The verified manufacturer information identifies 15W output power, 250mΩ integrated power MOSFETs, startup and shutdown pop-elimination circuitry, and short-circuit protection. The 8-SOICE package and integrated power stage can simplify a mono speaker amplifier implementation compared with a discrete MOSFET output stage. A 4Ω speaker load is explicitly supported by the single-ended output structure, while the exact thermal and layout limits must be taken from the manufacturer datasheet. The MP7740 is positioned for portable or compact audio products where speaker drive current, board area, and startup behavior matter. It can be used in consumer speaker designs, portable audio equipment, soundbars, and auxiliary audio modules, provided the supply voltage, speaker impedance, thermal conditions, and input signal levels match the device specifications. The absence of a verified switching-frequency value, gain setting, and exact pin-level application circuit in the supplied data prevents adding unconfirmed parameters. Designers should pay particular attention to the exposed thermal pad, copper area, supply decoupling, output filtering, and speaker-load wiring. The integrated protection circuit is useful, but it does not remove the need for correct layout and thermal management. Because the target is a single-ended mono amplifier, system-level headroom and filter selection should be evaluated together with the speaker impedance rather than treated as independent choices. This page consolidates the verified manufacturer and distributor information for MP7740DN-LF-Z, including the 15W Class-D architecture, supply range, package information, sourcing links, and engineering-focused selection guidance. It does not invent pricing, pin functions, electrical limits, or drop-in replacements that were not confirmed by the supplied records.

RFQ संपर्क
MP7741DQ-LF-P - 10W Mono Class-D Audio Amplifier | MPS
MP7741DQ-LF-P

MP7741DQ-LF-P - 10W Mono Class-D Audio Amplifier | MPS

The Monolithic Power Systems MP7741DQ-LF-P is a 10 W mono Class-D audio amplifier with a single-ended output structure, a 9.5 V to 36 V supply range, and a surface-mount 10-QFN package. The device integrates 250 mΩ power MOSFETs, startup and shutdown pop-elimination circuitry, short-circuit protection, and thermal protection to support compact speaker-driver designs. A Class-D audio amplifier is a switching amplifier that uses transistor stages to deliver audio energy efficiently. Compared with a linear amplifier, its MOSFET output stage can reduce power dissipation and support higher output power from a compact package. The MP7741 belongs to the integrated audio-amplifier hierarchy: Class-D amplifier, audio power amplifier, speaker driver, and power-management IC. Key features include a 10 W output capability into an 8 Ω speaker, mono single-ended operation, and integrated protection functions. The manufacturer describes the amplifier as suitable for audio applications where compactness, efficiency, and reduced external discrete components are important. Its integrated 250 mΩ MOSFETs reduce the need for separate output power transistors, while the protection circuits address fault conditions that can otherwise damage an audio output stage. The MP7741 uses a Class-D topology with a single-ended output, making board integration and speaker connection practical for portable audio, consumer audio, and auxiliary speaker systems. Designers should still account for supply decoupling, amplifier enable or shutdown sequencing, speaker loading, thermal dissipation, and the inductor requirements associated with the filtering and output network specified by the manufacturer design guidance. Typical applications include compact speaker systems, portable audio products, sound bars, multimedia equipment, and auxiliary audio modules. Compared with a discrete Class-D output stage, the integrated device can reduce board area and assembly complexity. Compared with a larger multi-channel amplifier, the MP7741 is optimized for a single mono speaker channel, allowing designers to use multiple devices when stereo or multichannel amplification is required. A key design consideration is thermal management. Although the integrated structure improves efficiency, sustained high output power still requires adequate copper area and a supply path capable of delivering the required current. The manufacturer evaluation board EV7741DQ-00A is a useful reference for evaluating the MP7741 amplifier implementation. Designers should follow the manufacturer’s recommended output filtering, input, supply, and layout arrangements rather than inferring them solely from the package dimensions. This page combines the verified manufacturer product information and distributor listings with application guidance and engineering considerations. It also distinguishes verified technical facts from parameters that require confirmation in the manufacturer datasheet, helping engineers evaluate the MP7741DQ-LF-P for speaker-driver designs without relying on unverified substitute specifications.

RFQ संपर्क
MP7741DQ-LF-Z - 10W Mono Class D Amplifier | MPS
MP7741DQ-LF-Z

MP7741DQ-LF-Z - 10W Mono Class D Amplifier | MPS

The Monolithic Power Systems MP7741DQ-LF-Z is a 10 W mono Class D audio amplifier with a single-ended output, integrated 250 mΩ power MOSFETs, startup and shutdown pop elimination, and short-circuit protection. It is supplied in a 10-VFDFN exposed-pad package with an indicated 3 mm by 3 mm footprint. The device targets compact audio systems requiring efficient amplification without a conventional linear output stage. A Class D audio amplifier is a switching power amplifier that uses pulse-width modulation to drive an output MOSFET bridge and reconstruct the audio waveform through filtering. Compared with linear audio amplifiers, the Class D category offers higher power-conversion efficiency and lower output-stage dissipation, making it useful for portable speakers, compact consumer equipment, and space-constrained audio products. The MP7741 uses a single-ended output structure rather than a bridge-tied load, so the speaker connection and output-filter requirements must follow the manufacturer guidance. Key verified features include 10 W mono Class D operation, integrated 250 mΩ power MOSFETs, depop circuitry for startup and shutdown, and short-circuit and thermal protection features reported by distributors. The device is specified for a -40°C to 125°C operating-temperature range. The exposed-pad package helps remove heat from the power stage, although final thermal performance depends on the PCB copper area, power dissipation, ambient temperature, and load impedance. The MP7741 is intended for analog-input audio paths where a small, efficient mono output stage is useful. Typical applications include compact speakers, portable audio products, soundbars, consumer audio modules, and auxiliary speaker systems. Its single-ended output should be considered carefully when selecting speaker wiring, output filtering, and grounding arrangements. The manufacturer evaluation board EV7741DQ-00A provides a practical reference for evaluating the amplifier, although the supplied verified data does not provide its schematics or component values. Designers should verify the exact pin names, exposed-pad connection, recommended input and output filtering, and speaker impedance against the current manufacturer datasheet before layout release. [DATA_NEEDED: exact electrical limits, supply-voltage range, output-power conditions, efficiency, THD+N, gain settings, and recommended filter values] were not present in the supplied verified data and are intentionally not guessed. Pricing and stock status must likewise be confirmed at the time of quotation. This page combines verified manufacturer and distributor information, same-package replacement status, and application-oriented design guidance. It is intended to help engineers identify the correct amplifier class, package, thermal considerations, and sourcing questions before requesting a quote.

RFQ संपर्क
MP7742DF-LF-Z - 2x15W Stereo Class-D Audio Amplifier
MP7742DF-LF-Z

MP7742DF-LF-Z - 2x15W Stereo Class-D Audio Amplifier

The Monolithic Power Systems MP7742DF-LF-Z is a 2-channel stereo Class-D audio amplifier IC delivering 2 x 15 W into 4-ohm speakers in a 20-pin TSSOPF exposed-EP package. It is designed for compact, high-efficiency audio systems where integrated power MOSFETs, short-circuit protection, thermal protection, and startup/shutdown pop elimination reduce external circuitry. The verified distributor listings identify the device as an active, lead-free, RoHS3-compliant, surface-mount stereo audio amplifier. What is a Class-D audio amplifier? A Class-D amplifier is a switching power amplifier that drives a speaker through a PWM output stage rather than continuously dissipating signal power in a linear output transistor. This topology provides high efficiency and compact integration, making it part of the audio amplifier IC family and broader power-management semiconductor hierarchy. The MP7742 is intended for speaker-driving applications where low board area and integrated protection are valuable. Verified product information highlights include 15 W per channel at 4 ohms, two-channel stereo operation, Class-D output, integrated 250 mΩ power MOSFETs, startup/shutdown pop elimination, and short-circuit and thermal protection. The package is identified as 20-pin TSSOPF with an exposed pad and tape-and-reel packaging. The datasheet search result also reports a 13-page PDF, but no official manufacturer PDF URL was supplied in the verified data. Typical applications include compact stereo speakers, portable audio products, consumer audio equipment, USB or powered speaker systems, small multimedia speakers, and auxiliary audio modules. Compared with a linear audio amplifier, the switching Class-D architecture reduces wasted power in the output stage, but correct filtering, thermal design, speaker impedance, and supply decoupling remain essential. A 4-ohm load is explicitly identified for the 15 W-per-channel specification; operation below the datasheet's limits should be avoided. When designing a board around the MP7742DF-LF-Z, preserve the exposed-pad thermal path and follow the manufacturer layout guidance for power and audio traces. Place input, filter, and output-network components close to their associated pins, and use an appropriately rated speaker and power supply. The verified data does not provide the complete electrical limits, pin names, exact filter values, or recommended operating-voltage range, so those details must be confirmed in the manufacturer datasheet before production release.

RFQ संपर्क