उत्पाद (44,000+)

MP8110DK-LF-P - 40V High-Side Current Sense Amplifier | MPS
MP8110DK-LF-P

MP8110DK-LF-P - 40V High-Side Current Sense Amplifier | MPS

Monolithic Power Systems MP8110DK-LF-P is a precision high-side current-sense amplifier with one channel, a 2.5 V to 40 V operating supply range, and an 8-MSOP package. The device typically consumes 12 µA, while its output provides 1 V for a 5 A load-current condition according to the manufacturer evaluation-board description. These characteristics position it for low-cost battery and DC current monitoring where the measured conductor lies above the system ground potential. A high-side current-sense amplifier is an instrumentation amplifier that measures the small voltage developed across a sense resistor placed in the positive supply path. In the component hierarchy, it belongs to the current-sense amplifier family, instrumentation amplifier category, analog signal-conditioning ICs, and broader power-monitoring and power-management ecosystem. Unlike a low-side arrangement, high-side sensing keeps the load-current path at ground potential and supports direct monitoring of battery or system input current. Key features include a wide 2.5 V to 40 V single-supply operating range, typical supply consumption of 12 µA, one amplifier channel, and a low-cost 8-MSOP implementation. The manufacturer identifies notebook computers, cell phones, and battery-powered systems as representative applications. An evaluation board is also available as the EV8110DS-00A, providing a practical platform for evaluating the device's output response and current-to-voltage relationship. The MP8110 family uses a high-side sensing arrangement so that the input-side common-mode voltage can rise with the monitored bus while the measured differential signal remains small. Its 1 V output for a 5 A load condition provides a useful reference for the accompanying evaluation board. Designers should nevertheless verify the complete gain, output range, common-mode limits, offset, accuracy, and stability specifications against the current manufacturer datasheet before finalizing a production design. Typical uses include battery charge monitoring, DC input-current measurement, load-current reporting, and system power-management feedback. The low 12 µA typical consumption is particularly relevant to portable equipment where every microampere contributes to standby demand. The device can also support power-path monitoring when the conductor being measured must remain at a high common-mode voltage relative to the system ground. The primary design consideration is the sense-resistor and feedback-network implementation. Place the sense resistor where it can be measured cleanly, route the differential inputs as a short matched pair, and confirm that the expected output voltage remains inside the amplifier's operating range. Component values, resistor tolerance, trace resistance, and the amplifier's own accuracy will determine the final current-measurement error. This page consolidates verified manufacturer specifications, distributor availability, a same-family drop-in alternative, application guidance, and practical selection considerations. It also distinguishes supplied facts from parameters that require confirmation in the manufacturer datasheet, supporting faster engineering evaluation without presenting unverified electrical values as established specifications.

RFQ संपर्क
MP8110DK-LF-Z - 40V High-Side Current Sense Amp | MPS
MP8110DK-LF-Z

MP8110DK-LF-Z - 40V High-Side Current Sense Amp | MPS

Monolithic Power Systems Inc. MP8110DK-LF-Z is a single-circuit, precision high-side current-sense amplifier with a 2.5 V to 40 V input-voltage range and a 1 V output corresponding to 5 A of load current, housed in an 8-pin MSOP package. The device is intended to monitor current in a high-side supply rail while producing an analog voltage proportional to the measured load current. A high-side current-sense amplifier is an instrumentation amplifier that measures the small voltage drop across a sense resistor placed in series with a power path. The MP8110 belongs to the current-sense amplifier category, which is part of the broader analog and mixed-signal IC hierarchy. Its high-side placement keeps the monitored load near ground potential, making it useful in systems where the current-carrying conductor is difficult to bring to a low-voltage analog input. The verified manufacturer information identifies a 2.5 V to 40 V operating input range, a typical 17 µA supply consumption, one amplifier circuit, and a nominal transfer relationship in which 1 V of output represents 5 A of load current. This 0.2 V/A relationship provides a direct way to interpret the output voltage during current measurements. The 40 V capability supports measurement of high-voltage rails without requiring the amplifier to be placed directly across the full supply voltage. The MP8110DK-LF-Z is described by the manufacturer as a low-cost, precision, high-side current-sense amplifier. Its proportional analog output can be connected to an ADC, comparator, controller, or monitoring circuit so that the host system can measure load current or react when a programmed threshold is exceeded. The manufacturer also documents the EV8110DS-00A evaluation board for evaluating the MP8110 in a complete application circuit. Typical uses include power-supply load monitoring, battery-powered systems, industrial controllers, motor-control circuits, and general 40 V power rails. Because the output scales at 0.2 V per ampere, a 5 A load produces a 1 V output according to the manufacturer product-page information. Designers should verify the required sense-resistor value, output range, error limits, and operating conditions against the complete manufacturer datasheet before production use. A primary design consideration is Kelvin routing of the sense-resistor connections. The amplifier must detect the voltage drop across the sense resistor without picking up voltage drops in its own supply and ground traces. Short, symmetric connections, suitable resistor placement, and a clean return path help preserve measurement accuracy. The analog output should also remain within the input range of the receiving ADC or controller. This page consolidates the verified manufacturer and distributor information for MP8110DK-LF-Z, including the known electrical characteristics, package information, sourcing links, and practical application guidance. It also separates documented values from parameters that still require confirmation from the full datasheet, helping engineers make faster and more defensible component-selection decisions.

RFQ संपर्क
MP8110DS-LF-Z - 40V High-Side Current Sense Amp | MPS
MP8110DS-LF-Z

MP8110DS-LF-Z - 40V High-Side Current Sense Amp | MPS

Monolithic Power Systems MP8110DS-LF-Z is a precision, high-side current-sense amplifier operating from a single 2.5 V to 40 V supply, with a 1.4 V to 40 V common-mode input range and typical supply consumption of 12 µA. The device is packaged in an 8-pin SOIC. It is designed to measure current in a high-side supply rail without disrupting the load path, making it useful in notebook computers, cellular phones, battery systems, and other DC power-monitoring equipment. A high-side current-sense amplifier is an instrumentation amplifier that senses the small voltage developed across a low-ohm sense resistor in a current-carrying conductor. The MP8110 converts this differential sense voltage into a proportional output voltage. This category belongs to the amplifier hierarchy: current-sense amplifier → instrumentation amplifier → analog amplifier → integrated circuit. High-side placement is especially valuable in battery-powered equipment because the monitored load ground can remain connected directly to the system ground. Key verified characteristics include a 2.5 V to 40 V operating supply, 1.4 V to 40 V common-mode voltage range, 400 µV input offset voltage, 4 nA input bias current, 5 mA output current capability, 97 dB common-mode rejection, and an enable or shutdown function. The 12 µA typical supply current supports low-power monitoring designs. These parameters make the amplifier suitable for power paths where the measured current can range from light-load conditions to substantially higher operating levels. The MP8110 uses a precision differential-sensing architecture to reject supply ripple and common-mode disturbances present on the high-side conductor. Its common-mode rejection of 97 dB helps preserve measurement accuracy when the monitored rail changes substantially. The wide 40 V operating and common-mode limits accommodate automotive, industrial, communications, and portable equipment rails, although the selected sense resistor and amplifier gain must still be chosen to keep the output within the usable analog range. Typical uses include battery charge monitoring in notebook computers and cellular phones, DC/DC converter load measurement, power-path current limiting, general high-side load detection, and energy-management subsystems. The enable or shutdown function can be used to reduce consumption when continuous monitoring is unnecessary. Because the part senses above the load connection, it avoids inserting an additional ground-path element between the source and the monitored system. The primary design consideration is selecting the sense-resistor value and amplifier gain together. Too little sense resistance produces an output signal buried in noise, while too much resistance can reduce available supply voltage and increase power loss as I²R. Layout should keep the differential traces short, matched, and away from switching nodes. Input filtering and the manufacturer’s recommended resistor and capacitor values should be used to balance response time against transient rejection. This product page consolidates verified manufacturer and distributor information, current-sense design considerations, practical application guidance, and verified drop-in sourcing data. It is intended to help engineers compare the MP8110DS-LF-Z with an exact same-package replacement without inferring unverified electrical differences.

RFQ संपर्क
MP8130DJ-LF-Z - 36V 200kHz Low-Power Op Amp | MPS
MP8130DJ-LF-Z

MP8130DJ-LF-Z - 36V 200kHz Low-Power Op Amp | MPS

The Monolithic Power Systems MP8130DJ-LF-Z is an ultra-low-power, high-voltage operational amplifier with rail-to-rail output, 200 kHz bandwidth, and a 10 uA typical supply current. It operates from a single 2.7 V to 36 V supply and is packaged in a compact TSOT-23-5 surface-mount package. The MP8130 family is designed for applications that require higher supply-voltage tolerance and low operating power, including industrial instrumentation, sensor interfaces, battery-powered systems, and low-frequency signal-conditioning circuits. An operational amplifier, or op amp, is a high-gain analog amplifier intended for feedback-based applications. The MP8130 is a general-purpose precision analog device whose rail-to-rail output allows the output voltage to approach the supply rails under suitable load and output conditions. Its single-supply operating range of 2.7 V to 36 V places it within the voltage-regulator and power-management IC ecosystem as a signal-conditioning component rather than a power-conversion device. Key characteristics include a 200 kHz gain-bandwidth product, approximately 10 uA supply current, 82 dB CMRR, and a 0.1 V/us slew rate. The combination of high-voltage tolerance and low quiescent current makes the device useful where a conventional low-voltage amplifier would not tolerate the available supply voltage. The TSOT-23-5 package supports space-constrained PCB layouts while retaining five-pin operational-amplifier connectivity. The MP8130 is optimized for low-frequency closed-loop operation rather than high-speed signal processing. Its bandwidth limits how quickly the output can respond to small-signal inputs, while the 0.1 V/us slew rate limits large-signal transitions. Feedback-network values, load capacitance, input common-mode range, and supply bypassing should therefore be checked against the manufacturer datasheet before deployment in precision or high-speed designs. Typical applications include low-power sensor conditioning, industrial control and monitoring, portable instrumentation, battery-operated measurement systems, and analog signal buffering. The 36 V maximum supply rating can simplify designs that operate from industrial rails, although the actual operating range must remain within the specified 2.7 V to 36 V limits and the total supply voltage must not exceed the device rating. For PCB implementation, place input and output bypass capacitors close to the amplifier pins and use low-ESL, low-ESR surface-mount ceramic capacitors. Keep feedback traces short and separate high-current return paths from sensitive input nodes. The manufacturer datasheet should be consulted for the complete electrical-characteristics table, input and output limits, and package drawings. This product record consolidates manufacturer specifications, distributor availability information, package details, application guidance, and verified drop-in replacement findings for engineers evaluating the MP8130DJ-LF-Z.

RFQ संपर्क
MPC184VFB - PowerPC Security Coprocessor, 66MHz | NXP
MPC184VFB

MPC184VFB - PowerPC Security Coprocessor, 66MHz | NXP

The NXP (formerly Freescale) MPC184VFB is a PowerPC ISA security coprocessor designed to offload cryptographic operations from host processors in networking, storage, and embedded computing systems. Operating at up to 66MHz with a 1.5V core supply, the device accelerates DES, 3DES, AES, MD5, SHA-1/SHA-256, public-key algorithms (RSA, DH), and random number generation, freeing the host CPU for higher-level tasks. It is housed in a 252-ball MAPBGA (VFB) package suited for high-density system designs. What is a security coprocessor? A security coprocessor is a dedicated hardware accelerator that executes cryptographic primitives (symmetric ciphers, hash functions, public-key operations) at wire speed, far faster than a software implementation on a general-purpose CPU. The MPC184VFB belongs to the broader taxonomy: security coprocessor -> cryptography accelerator -> peripheral / specialized IC -> semiconductor. It is typically paired with a host PowerPC or MIPS processor that delegates cryptographic tasks via a memory-mapped or DMA interface, making it foundational for IPsec, SSL/TLS, and DRM pipelines. Key features include hardware-accelerated AES (128/192/256-bit), DES/3DES, SHA-1/256 and MD5 hashing, true random number generation (TRNG), and big-integer arithmetic for RSA and Diffie-Hellman key exchange. The device exposes a memory-mapped register interface plus scatter/gather DMA channels for high-throughput packet processing. It targets commercial temperature operation and integrates seamlessly with the Freescale PowerQUICC and QorIQ families of communications processors that share the same ecosystem. Architecturally, the MPC184VFB embeds a dedicated crypto engine with parallel datapaths for symmetric and asymmetric algorithms, an on-chip TRNG, and DMA engines that offload data movement from the host. It belongs to NXP's MPC18x PowerPC coprocessor family and supports both little-endian and big-endian host configurations. The 1.5V core plus I/O rails support operation across the 66MHz bus interface. Typical applications include IPsec VPN gateways, SSL/TLS accelerators in web servers and load balancers, secure boot and firmware verification in embedded routers, hardware security modules (HSM), and DRM-protected media streaming appliances. The combination of bulk crypto throughput and TRNG makes it a long-standing building block for enterprise security appliances. When designing with the MPC184VFB, allocate sufficient PCB area for the 252-ball MAPBGA package, route the host bus with controlled-impedance traces, and ensure adequate decoupling for both the 1.5V core rail and the I/O rail. The host driver stack must initialize the cascade of DMA channels and crypto channels before traffic is admitted to minimize session setup latency. This page synthesizes distributor pricing, sparse drop-in availability from authorized and aftermarket channels, and practical design notes for embedding the MPC184VFB in a security appliance - information that goes beyond the manufacturer datasheet alone.

RFQ संपर्क
MPC184VMB - 66MHz PowerPC Security Coprocessor | NXP
MPC184VMB

MPC184VMB - 66MHz PowerPC Security Coprocessor | NXP

The NXP MPC184VMB is a 66 MHz PowerPC ISA security coprocessor housed in a 252-ball MAPBGA (21x21 mm) package, designed to offload cryptographic processing from the host CPU in networking and security appliances. Operating from a 1.5 V core supply, the device integrates a MPC1xx-class PowerPC processing core with a PCI bridge/memory controller subsystem, targeting VPN/firewall gateways, SSL accelerators, and IPsec/IPv6 routers. It belongs to NXP's (formerly Motorola/Freescale) security co-processor family and is specified for commercial (0C to +70C) environments. A security co-processor is a dedicated hardware accelerator that executes cryptographic primitives - DES/3DES, AES, SHA-1/MD5, RSA, and random-number generation - independently of the main system processor. By transferring these workloads to a separate ASIC, the host CPU is freed for protocol processing, packet forwarding, and application logic. Within the broader taxonomy, the MPC184VMB is a security co-processor IC, part of the embedded security processor category, which itself sits under specialized ICs and integrated circuits (ICs). It is closely related to standard PowerPC host processors in the same MPC8xx/MPC1xx ecosystem. Key features include 66 MHz core clock speed, 1.5 V core voltage, integrated PCI interface, on-chip memory controller, and dedicated cryptographic execution units. The 252-MAPBGA package offers high integration density suitable for compact line-card designs while providing a robust thermal interface. Lead-free and RoHS-compliant per the manufacturer datasheet, the part is supplied in tray packaging for volume manufacturing. The MPC184VMB is typically deployed in network routers, VPN concentrators, firewall appliances, SSL/TLS acceleration cards, and government/military secure communications equipment where FIPS-grade hardware acceleration is required. Network equipment vendors integrate it on line cards and security co-processor mezzanines to provide wire-speed encryption without burdening the main forwarding engine. A critical design consideration is power-sequencing: the 1.5 V core rail must be brought up cleanly before I/O voltages to prevent latch-up. Decoupling must follow the manufacturer reference design (multiple bulk and ceramic capacitors placed adjacent to the BGA power balls) to ensure signal-integrity margins at 66 MHz PCI operation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ संपर्क
MPC506 - 16-Ch ±15V CMOS Analog Multiplexer | Texas Instruments
MPC506

MPC506 - 16-Ch ±15V CMOS Analog Multiplexer | Texas Instruments

The Texas Instruments MPC506 is a 16-channel single-ended CMOS analog multiplexer designed for precision analog signal routing in data acquisition and test systems. It operates with analog signal ranges up to ±15V and features internal overvoltage protection up to 70Vpp, ensuring robust performance in industrial environments. The device is available in a 28-pin SOIC package (MPC506AU) and is pin-compatible with the MPC507A differential 8-channel variant. An analog multiplexer is a semiconductor device that selects one of several analog input signals and routes it to a single output, controlled by digital address lines. It is a fundamental building block in data acquisition systems, enabling multiple sensors or signal sources to share a single ADC or amplifier. Multiplexers belong to the broader category of analog switches and are essential where signal routing, channel expansion, or test automation is required. Key features include break-before-make switching to prevent channel interaction, low standby power of 7.5mW typical, and a 1.5kOhm on-resistance. The device supports a ±15V analog signal range and provides overvoltage protection without channel interaction, making it suitable for harsh industrial environments. CMOS fabrication ensures low power consumption and high input impedance. Fabricated in CMOS technology, the MPC506 provides low leakage currents and high input impedance, preserving signal integrity. The internal 1kOhm series resistance protects the device from overvoltage conditions up to 70Vpp, eliminating external protection components in many applications. Break-before-make switching ensures the output is never momentarily connected to two inputs simultaneously, preventing signal corruption. Typical applications include data acquisition systems, test and measurement equipment, industrial process control, and medical instrumentation. The MPC506 is ideal for routing multiple analog signals to a single ADC, expanding channel count in a measurement system, or implementing programmable gain amplifier configurations. When designing with the MPC506, ensure analog input signals remain within the specified ±15V range to avoid damage. Drive the digital address lines with proper logic levels, and buffer the output if driving a capacitive load to maintain stability.

RFQ संपर्क
MPC506AP - 16:1, ±15V Analog Multiplexer | Texas Instruments
MPC506AP

MPC506AP - 16:1, ±15V Analog Multiplexer | Texas Instruments

The Texas Instruments MPC506AP is a 16:1, one-channel CMOS analog multiplexer with a 16 V dual-supply range, 1.5 kOhm on-resistance, and a 28-PDIP package. According to the verified distributor listing, it is designed for single-ended routing of up to 16 analog inputs while providing input overvoltage protection. The mux is suitable when a system must select among multiple sensor, measurement, control, or instrumentation signals. An analog multiplexer is a switching interface that connects one common terminal to one selected input terminal. The MPC506AP belongs to the analog-switch and multiplexer hierarchy, where CMOS low-power switching, channel isolation, break-before-make behavior, and signal-range management are central design considerations. Its 16-channel organization makes it useful for reducing the number of external connections in multichannel analog systems. Key verified features include a 16:1 configuration, one switch circuit, approximately 1.5 kOhm on-resistance, a 28-PDIP package, analog overvoltage protection, no channel interaction during overvoltage, break-before-make switching, an analog signal range of ±15 V, and typical standby power of 7.5 mW. The input protection feature helps preserve signal fidelity when an analog input exceeds a supply voltage, while the multiplexer architecture provides a controlled way to share a downstream analog resource. The device is a 16-channel single-ended analog multiplexer and is associated with the MPC506A family, which uses CMOS multiplexing for general-purpose signal selection. The verified data also identifies MPC506A as having input overvoltage protection. Exact switching timing, channel capacitance, leakage, logic thresholds, supply-current limits, and absolute maximum ratings were not supplied in the verified excerpts, so those parameters should be confirmed in the manufacturer datasheet before design release. Typical applications include multiplexed sensor acquisition, data acquisition systems, instrumentation, industrial control, analog test equipment, and communications or control boards that need to route several low-frequency analog signals to one processing channel. The ±15 V analog range is especially relevant for bipolar industrial signals, provided the system observes the device's verified supply and input limits. Designers should confirm the exact pinout, truth table, enable polarity, supply requirements, and timing from the MPC506A datasheet. PCB layout should keep analog traces short, provide a stable ground reference, and account for the 28-pin through-hole package. Because the mux adds on-resistance and switching transients, the downstream amplifier or converter must have sufficient input bandwidth and settling behavior. This page consolidates the verified manufacturer and distributor descriptions, package identity, channel count, resistance, protection features, and application guidance into a design-oriented component reference while clearly separating unavailable parameters from sourced facts.

RFQ संपर्क
MPC506APG4 - 16:1 CMOS Analog Multiplexer | Texas Instruments
MPC506APG4

MPC506APG4 - 16:1 CMOS Analog Multiplexer | Texas Instruments

The Texas Instruments MPC506APG4 is a single-ended 16-channel or differential 8-channel CMOS analog multiplexer with a typical on-resistance of 1.5 kOhm, housed in a 28-pin PDIP package. It also provides analog overvoltage protection, no channel interaction during an overvoltage condition, and break-before-make switching. These characteristics make it suitable for routing multiple analog inputs through a shared analog-to-digital converter or measurement front end when channel isolation, predictable switching behavior, and limited fault energy are important. An analog multiplexer is a switching interface that connects one of several signal inputs to a common output. The MPC506APG4 can operate as a 16:1 single-ended multiplexer or as an 8:1 differential multiplexer. Within the broader semiconductor hierarchy, it is an analog switch and multiplexer, an interface IC, and ultimately a power-management-independent signal-routing device. The CMOS implementation supports bidirectional signal routing rather than restricting the device to a one-way digital path. Verified device features include analog overvoltage protection, suppression of channel interaction during overvoltage, and break-before-make operation. Break-before-make switching prevents the previous channel and the next channel from conducting simultaneously during a transition, which reduces transients and crosstalk at the multiplexer output. The published analog signal range extends to plus or minus 15 V, while standby power is specified as 7.5 mW typical. The 1.5 kOhm typical on-resistance identifies the part as a precision analog multiplexer rather than a low-resistance power switch. The MPC506APG4 combines a 16-channel single-ended configuration with an 8-channel differential configuration. This dual organization allows one device to serve designs where each measurement is referenced to a common return, as well as designs that require paired positive and negative inputs. Differential operation can reduce sensitivity to common-mode voltage and ground offsets when the source circuitry and downstream converter support balanced signaling. Selection between the two operating modes is governed by the system wiring and the control logic presented to the device. Typical uses include multiplexed data acquisition, automated test equipment, instrumentation panels, industrial monitoring, process-control measurement systems, and communication routing boards. The overvoltage-protection feature is particularly relevant when external transducers or field wiring may present a fault voltage. In such systems, a protected multiplexer can limit fault propagation to downstream circuitry while its break-before-make behavior helps isolate channels during selection changes. When designing around this device, verify the complete switch-control sequence and allow adequate settling time after each address change before sampling the multiplexed output. External protection, clamping, and filtering may still be required for long field-wiring runs. Because the provided distributor listing identifies the package as a 28-pin PDIP, the device should be treated as a through-hole component and checked against PCB drilling, connector spacing, and assembly thermal requirements before a production release. This page consolidates distributor availability information, verified device features, package details, and engineering guidance into one implementation-focused reference. It also distinguishes the information confirmed by the retrieved sources from electrical details that still require confirmation in the complete manufacturer datasheet before precision design sign-off.

RFQ संपर्क
MPC506AU - 16:1, 16V Analog Multiplexer | Texas Instruments
MPC506AU

MPC506AU - 16:1, 16V Analog Multiplexer | Texas Instruments

The Texas Instruments MPC506AU is a single-circuit, 16:1 CMOS analog multiplexer with a 16 V power supply, 1.5 kOhm on-state resistance, and 28-pin SOIC (DW) package. Designed by Texas Instruments as the MPC506A general-purpose single-ended multiplexer, it routes one of 16 analog inputs to one output while providing analog overvoltage protection, break-before-make switching, and no channel interaction during overvoltage. The device is identified by DigiKey as a 16:1 analog switch IC with one circuit and 1.5 kOhm resistance. An analog multiplexer is a semiconductor switching network that connects one selected input channel to a shared output. A single-ended analog multiplexer belongs to the broader analog switch hierarchy and connects to analog front ends, data acquisition systems, test equipment, industrial control, and instrumentation. The MPC506AU uses digital select and enable logic to control its analog signal path, allowing one measurement amplifier, converter, or input instrument to inspect multiple sensor or source channels. Verified features include a ±15 V analog signal range, analog overvoltage protection, no channel interaction during overvoltage, break-before-make switching, and 7.5 mW typical standby power. The protection circuitry is intended to preserve signal fidelity when an analog input exceeds either power-supply voltage. Texas Instruments describes the MPC506A as a 16-channel single-ended multiplexer; the separately described MPC507A is an 8-channel differential multiplexer and is therefore not a functional drop-in substitute. The 28-pin DW SOIC package supports surface-mount assembly, while its digital controls allow a controller to select channels in a sequential measurement system. The verified part detail lists a -40°C to 85°C operating-temperature range and a 16 V supply condition. Other switching timing, capacitance, leakage, channel-count logic, and absolute-maximum values are not present in the supplied result excerpts and must be checked in the manufacturer datasheet before final design release. Typical uses include multiplexed sensor acquisition, automated test systems, programmable instrumentation, industrial measurement, and signal routing where multiple analog sources share one downstream converter. The key design consideration is preserving accuracy during channel transitions. Use the specified break-before-make behavior, observe address and enable setup timing from the datasheet, and account for the 1.5 kOhm on-resistance when calculating source-load attenuation or input-current requirements. This product record combines the verified manufacturer and distributor descriptions with practical routing, switching, and signal-integrity guidance. It also separates true pin-compatible alternatives from related multiplexers that differ functionally, preventing a package-only match from being presented as an engineering drop-in replacement.

RFQ संपर्क
MPC506AU/1K - 16:1 Analog Multiplexer | Texas Instruments
MPC506AU/1K

MPC506AU/1K - 16:1 Analog Multiplexer | Texas Instruments

The Texas Instruments MPC506AU/1K is a 16-channel, single-ended, 16:1 CMOS analog multiplexer with a 1.5 kΩ on-resistance, analog signal range of ±15 V, and 28-pin SOIC package. It also provides analog overvoltage protection, break-before-make switching, and a true second source. An analog multiplexer is a switching device that routes one of several analog inputs to a common output. The broader hierarchy is analog multiplexer → analog switch → signal-routing IC → semiconductor. This distinction is important because the MPC506AU/1K supports multiple single-ended channels, whereas a multiplexer with fewer channels or a differential architecture may not be interchangeable without changing the system architecture. The most prominent device features are 16:1 channel selection, a 1.5 kΩ on-resistance, a ±15 V analog signal range, and analog overvoltage protection. The overvoltage-protection architecture allows an analog input to exceed a supply voltage without damaging the device or disturbing other channels. Break-before-make switching reduces the interval in which two channels are connected together, helping prevent unintended signal transfer during address transitions. Internally, the device uses CMOS switching structures controlled by digital select and enable logic. Its standby power consumption is listed as 7.5 mW typical in the available MPC506 documentation. The protected signal path is intended to preserve signal fidelity when an external node experiences excessive voltage, while the 16-channel arrangement reduces the number of external routing switches required in measurement and control systems. Typical applications include automated test equipment, data acquisition systems, instrumentation, industrial control, signal routing, and analog measurement front ends. The 16 selectable inputs allow one measurement chain to interrogate multiple sensors or conditioned analog sources sequentially. Designers must still account for channel resistance, switching transients, input loading, address timing, and the limits of the protected input network when establishing accuracy and bandwidth targets. A principal design consideration is off-state isolation. A multiplexer does not create an ideal disconnect, so source impedance, capacitance, leakage, crosstalk, and the characteristics of the selected channel can influence settling time and measurement accuracy. The source impedance connected to each input should therefore be evaluated together with the mux resistance rather than in isolation. This page combines verified manufacturer and distributor information, complete pinout availability status, practical application guidance, and a strict drop-in assessment. It distinguishes electrically compatible ordering variants from unsupported cross-package or redesign-only alternatives so engineers can make a defensible replacement decision.

RFQ संपर्क
MPC506AUG4 - 16:1 Analog Multiplexer | Texas Instruments
MPC506AUG4

MPC506AUG4 - 16:1 Analog Multiplexer | Texas Instruments

The Texas Instruments MPC506AUG4 is a 16-channel, single-ended CMOS analog multiplexer with a 16:1 configuration, 1.5 kOhm on-resistance, and a 28-pin SOIC package. Its headline characteristics include analog overvoltage protection to 70 VPP, no channel interaction during an overvoltage condition, break-before-make switching, an analog signal range of ±15 V, and 7.5 mW typical standby power. An analog multiplexer is an interface IC that routes one of several analog input channels to a common output. It sits within the hierarchy of analog switch, multiplexer, interface IC, and semiconductor. A single-ended 16:1 device uses one signal conductor per channel, making it suitable for systems that select among multiple voltage-based sensor, measurement, or control signals. The MPC506AUG4 provides that selection function while adding protection against excessive analog input voltage. The 70 VPP analog overvoltage protection is the part's most distinctive feature. According to the Texas Instruments MPC506A data sheet, input signals may exceed the power-supply voltages without damaging the multiplexer or disturbing other channels. This allows the selected channel to handle overvoltage conditions while the device maintains signal fidelity. Break-before-make switching provides an additional transition-control characteristic during channel changes. The MPC506AUG4 is identified as a 16-channel single-ended multiplexer, while the broader MPC506 family also includes an 8-channel differential multiplexer. Its 1.5 kOhm on-resistance is suitable for moderate-impedance analog networks, and the ±15 V specified analog signal range supports applications using bipolar analog levels. The 28-pin SOIC package supports conventional surface-mount PCB assembly. Typical uses include multichannel data acquisition, automated test equipment, instrumentation, industrial control, and signal routing where multiple analog sources must share one downstream converter or amplifier. Its input-overvoltage tolerance is particularly useful when long external lines or field-connected sources can present transients above the local supply rails. When designing around the MPC506AUG4, verify the absolute maximum analog input voltage, supply sequence, channel-switching behavior, and external source impedance. Because the verified product data does not provide a complete pin map, channel conductor resistance, charge injection, or off-state leakage, those values must be confirmed in the manufacturer data sheet before a new layout is released. This product record consolidates the verified distributor and manufacturer information into an engineering-focused view of protection, switching, packaging, procurement, and design constraints. It also clearly separates confirmed parameters from values that still require datasheet verification, helping engineers evaluate the MPC506AUG4 without overlooking analog protection or PCB-compatibility requirements.

RFQ संपर्क
MPC507AP - 8:1 Differential Analog Mux | Texas Instruments
MPC507AP

MPC507AP - 8:1 Differential Analog Mux | Texas Instruments

The Texas Instruments MPC507AP is a 16 V, 8:1 differential, single-channel CMOS analog multiplexer packaged in a 28-pin PDIP. The verified product information identifies one multiplexed signal path, two control circuits, 1.5 kOhm on-state resistance, analog overvoltage protection, and a typical standby power dissipation of 7.5 mW. It supports ±15 V analog signals and uses break-before-make switching with no channel interaction during overvoltage. An analog multiplexer is an interface IC that routes one of several physical inputs to a shared output according to digital address and enable signals. In differential operation, the MPC507AP selects one of eight paired inputs, reducing the number of downstream converters or signal-processing channels. Its hierarchy is analog multiplexer → multiplexer/demultiplexer → interface IC → semiconductor. Differential multiplexing is useful where two coupled signal lines must be selected together to preserve common-mode relationships. The principal features include 8:1 differential operation, a 16 V rated signal range, 1.5 kOhm on-state resistance, and analog input overvoltage protection. According to the available manufacturer-family data, analog inputs may exceed a supply voltage without damaging the device or disturbing other channels. Break-before-make switching prevents two channels from conducting together during address transitions, an important consideration when the selected source can produce significant voltage. The MPC507AP uses separate address and enable logic to control its analog routing. Digital control signals determine which differential pair connects to the common output, while the enable function places the device into a low-power state when it is not required. The verified search results also identify approximately 700 uA standby current and ±5 V to ±22 V supply-related information in distributor documentation, but the complete electrical limits must be confirmed in the manufacturer datasheet before final design release. Typical uses include multi-channel instrumentation, differential sensor acquisition, automated test systems, data acquisition interfaces, and industrial control modules. The part is most appropriate when eight differential sources must reach one downstream signal chain and when a wired-through-hole 28-pin package is acceptable. The tradeoff is its legacy PDIP format and analog-switch resistance, which can matter in precision, high-speed, or space-constrained systems. PCB layout should keep the mux output path short and provide a stable ground reference. Decoupling and protection requirements must follow the manufacturer datasheet, while unused digital inputs should be driven to defined levels rather than left floating. This page combines verified product information, distributor availability references, package details, and engineering guidance without inventing undocumented electrical limits.

RFQ संपर्क
MPC507APG4 - 8-Channel Differential Analog Multiplexer | TI
MPC507APG4

MPC507APG4 - 8-Channel Differential Analog Multiplexer | TI

The Texas Instruments MPC507APG4 is a dual 8:1 CMOS analog multiplexer with a maximum on-state resistance of 1.5 kOhm, switching times of 200 ns Ton and 250 ns Toff, and operation from dual +5 V to ±22 V supplies. The device is packaged in a 28-pin plastic dual in-line package (PDIP). An analog multiplexer is an interface IC that connects multiple analog inputs to a shared output under digital control. A differential multiplexer can route paired input signals and reduce common-mode interference, while a single-ended multiplexer selects one signal relative to ground. In the IC hierarchy, the MPC507APG4 is a CMOS analog switch, analog multiplexer, interface IC, and semiconductor designed to route instrumentation and control signals efficiently. Key features include analog overvoltage protection, no channel interaction during overvoltage, and break-before-make switching. The supported analog signal range reaches ±15 V, while standby power is 7.5 mW typical. The MPC507A family provides 16 single-ended channels or eight differential channels, making it useful for multichannel measurement, test, instrumentation, and signal-routing systems. The device uses separate digital address and enable controls to select one of eight differential channels. Because it is a CMOS implementation, low switching time and low standby power support acquisition systems that repeatedly change measurement paths. The dual-supply architecture also allows bipolar signals to be routed without a single-supply level-shifting arrangement. Typical applications include automated test equipment, data-acquisition systems, process-control instrumentation, multiplexed sensor interfaces, and laboratory measurement systems. Engineers should account for the relatively high 1.5 kOhm on-state resistance when interpreting source impedance, and should verify that every selected input remains within the device's absolute maximum ratings. Designers should preserve break-before-make timing and route sensitive analog inputs away from high-impedance control nets. Input filtering may be required when leakage, switching transients, or overvoltage events could affect the measured signal. The 28-pin PDIP also requires adequate spacing between adjacent boards and provides straightforward through-hole assembly for legacy and industrial equipment. This page consolidates verified manufacturer and distributor details, compares directly related MPC507 variants, and adds practical guidance on switching, signal integrity, protection, and procurement for engineers evaluating this legacy analog multiplexer.

RFQ संपर्क
MPC507AU/1K - 8:1 Differential Analog Mux | Texas Instruments
MPC507AU/1K

MPC507AU/1K - 8:1 Differential Analog Mux | Texas Instruments

The Texas Instruments MPC507AU/1K is a dual 8:1 differential-input CMOS analog multiplexer with a maximum on-state resistance of 1.5 kOhm, analog signal range of ±15 V, and 28-pin SOIC (DW) package. It supports dual supplies from ±5 V to ±22 V and provides input overvoltage protection, break-before-make switching, and no channel interaction during an overvoltage condition. Typical switching times are 200 ns turn-on and 250 ns turn-off. An analog multiplexer is a switching IC that routes one of several input signals to a shared output while preserving the integrity of the selected waveform. A differential 8:1 mux combines that function with paired signal paths, allowing two related analog inputs to be selected together. In the electronics hierarchy, the MPC507 belongs to the analog switch and multiplexer class, then to interface ICs and semiconductors. This makes it useful where multiple sensors, measurement inputs, or control lines must share a limited number of converter and amplifier inputs. The principal benefits of the MPC507AU/1K include protected analog inputs, a ±15 V signal range, dual 1.5 kOhm switch sections, and operating temperatures from -40°C to +85°C. The protection circuitry allows an analog input to exceed a supply voltage without damaging the device or disturbing other channels, according to the Texas Instruments MPC507 product information. This feature is valuable in industrial systems where transients or misconnection are possible. Technically, the device uses CMOS analog switching to support the stated ±15 V range and sub-microsecond transitions. Break-before-make operation limits the interval in which old and new channels overlap, while true second-source behavior supports applications requiring duplicated paths. The 28-pin SOIC package is a surface-mount, gull-wing package suitable for conventional PCB assembly and automated production. Typical applications include multiplexed data acquisition, industrial sensor routing, automated test equipment, analog signal instrumentation, and multi-channel measurement systems. In these systems, the MPC507 reduces the number of external analog front-end channels while preserving selectable overvoltage-protected inputs. When designing around this multiplexer, verify the actual supply voltages, input range, channel timing, and leakage requirements against the manufacturer datasheet. Keep high-impedance routing short, provide adequate return paths, and account for source impedance when calculating settling behavior. The 1.5 kOhm maximum on-state resistance can create attenuation and channel-to-channel gain variation if the selected source impedance is high. This page consolidates the verified manufacturer and distributor information, explicit drop-in cross-reference results, package details, commercial availability links, and practical selection guidance into one engineering-focused reference for the MPC507AU/1K.

RFQ संपर्क
MPC507AUG4 - 8:1 Differential Analog Multiplexer | Texas Instruments
MPC507AUG4

MPC507AUG4 - 8:1 Differential Analog Multiplexer | Texas Instruments

The Texas Instruments MPC507AUG4 is a 16-V, 8:1 differential analog multiplexer packaged in a 28-pin SOIC. It routes eight differential analog input channels to one output pair, provides analog overvoltage protection of 70 VPP, and maintains channel isolation during overvoltage conditions. The device operates from dual positive and negative supplies, supports analog signals from -15 V to +15 V, and features break-before-make switching. An analog multiplexer is a switching interface that connects one of several analog inputs to a shared output. The MPC507AUG4 operates in differential mode, using eight differential channel pairs rather than eight single-ended sources. This arrangement is useful when a measurement system must preserve the relationship between a positive and negative signal while selecting among multiple sensors, instrumentation inputs, or test points. In the component hierarchy, it is an analog switch IC, analog multiplexer, interface IC, and ultimately a semiconductor. Key features include 70 VPP analog overvoltage protection, no channel interaction during overvoltage, break-before-make switching to minimize switch overlap, a -15 V to +15 V analog signal range, and 7.5 mW typical standby power. The 1.5 kOhm on-resistance listed by DigiKey identifies the switching element resistance used when selecting a channel. The overvoltage protection is particularly important in industrial and test systems where transient or unexpected input amplitudes can otherwise damage the signal path or disturb unselected channels. Typical uses include multiplexed data acquisition, automated test equipment, instrumentation front ends, industrial sensor selection, and differential signal routing. Because the MPC507AUG4 accepts a wide bipolar analog range, it can reduce the need for separate upstream attenuation when inputs remain within the specified analog signal range. The 28-pin SOIC package is a surface-mount package suitable for conventional PCB assembly and automated production. The key design consideration is that overvoltage protection does not replace correct supply sequencing or input-range validation. Keep all inputs within the stated analog range unless the system intentionally exercises the protection function, and observe the manufacturer timing and logic-level requirements for address and enable control. Verify the exact pin assignments in the manufacturer datasheet before layout because the supplied web results describe the device but do not publish a complete numbered pin table. This page combines verified distributor specifications, manufacturer product information, cross-reference results, and practical selection guidance. It also distinguishes true pin-compatible drop-in options from functional equivalents that differ in channel architecture or pin assignment, helping engineers avoid PCB rework.

RFQ संपर्क
MPC508AP - 8:1 16V Analog Multiplexer | Texas Instruments
MPC508AP

MPC508AP - 8:1 16V Analog Multiplexer | Texas Instruments

The Texas Instruments MPC508AP is a 16-V, 8:1, single-ended, one-channel CMOS analog multiplexer in a 16-pin PDIP package. It provides eight analog inputs, break-before-make switching, and input overvoltage protection rated at 70 Vpp. According to the Texas Instruments product page, the device is intended for selecting one of eight single-ended signals while protecting the signal path during fault conditions. An analog multiplexer is an analog switch that routes one of several input signals to a common output. The MPC508AP belongs to the analog switch and multiplexer hierarchy, which supports signal acquisition, test systems, instrumentation, data conversion, and channel selection. Its 8:1 configuration reduces the number of external connections required when multiple sensors or measurement channels must share one downstream converter. The principal verified features include an 8-channel single-ended input arrangement, a ±15 V analog signal range, 70 Vpp input overvoltage protection, break-before-make switching, and typical standby power of 7.5 mW. The overvoltage-protection architecture allows analog inputs to exceed the supply rails without disturbing other channels, a useful property in systems where a fault or transients may occur on an external signal line. The DIP-16 package also supports through-hole prototyping and replacement in designs designed around the original footprint. The MPC508AP is distinct from a digital multiplexer because its switch path is intended to preserve analog signal fidelity rather than implement logic-level selection. Its CMOS implementation, protected inputs, and multiple analog channels make it suitable for data-acquisition front ends, automated test equipment, instrumentation, and signal-routing systems. The exact dynamic resistance, channel capacitance, leakage, propagation delay, supply-current, and logic-threshold values are not present in the supplied verified data and must be confirmed from the manufacturer datasheet before final design release. A typical circuit places the selected input at the multiplexer output and connects that output to an ADC, amplifier, or measurement instrument. The system should provide suitable supply rails, observe the control-signal sequencing requirements, and account for analog input limits and off-channel behavior. The DIP package is mechanically straightforward, but users should follow the manufacturer’s pin and layout guidance rather than infer connections from generic DIP conventions. This product data combines the verified Texas Instruments product identity, distributor listing information, datasheet references, and application-oriented guidance. It intentionally distinguishes documented parameters from unavailable technical fields rather than estimating them, helping engineers evaluate the MPC508AP for new designs and replacement planning.

RFQ संपर्क
MPC508AU - 8:1 Analog Multiplexer, 16V | Texas Instruments
MPC508AU

MPC508AU - 8:1 Analog Multiplexer, 16V | Texas Instruments

The Texas Instruments MPC508AU is a 16 V, 8:1, single-ended CMOS analog multiplexer and multiplexer switch in a 16-pin SOIC (DW) package. It routes one of eight analog inputs to a common output through a break-before-make switching arrangement, with a typical on-resistance of 1.3 kOhm. An analog multiplexer is a switching network that allows a system to share a single analog-to-digital converter, measurement amplifier, or signal-processing channel among multiple inputs. The MPC508AU belongs to the hierarchy of analog switch ICs, multiplexers, signal-selection devices, and semiconductor interface components. Its eight-channel single-ended architecture is useful where several voltage or current sources must be inspected sequentially without duplicating the downstream measurement circuitry. The MPC508AU provides analog overvoltage protection rated at 70 Vpp, allowing an input signal to exceed the device power-supply voltages without damaging the multiplexer or disturbing the other channels. According to the manufacturer datasheet, this protection maintains signal fidelity and prevents channel interaction during an overvoltage condition. Its specified analog signal range is ±15 V, while the associated power-supply capability supports dual-supply operation. Break-before-make switching prevents two channels from conducting simultaneously during a transition, which is important when the multiplexer connects sources with different voltages. Typical standby power is 7.5 mW, making the device suitable for instrumentation and test systems in which channel-selection overhead should remain small. The device is also identified as a true second source, an important supply-chain consideration for long-lived industrial and instrumentation programs. Typical uses include data-acquisition systems, automated test equipment, analog measurement front ends, signal routing between sensors and a common amplifier, and laboratory or process-control interfaces. The 1.5 kOhm on-resistance listed by DigiKey is adequate for many high-impedance sensing tasks, although source impedance and settling behavior must be evaluated when the selected channel is connected. A practical design consideration is to keep the selected signal path short and to place protection and conditioning components near the multiplexer inputs. Because the part provides input overvoltage protection rather than unlimited transient clamping, engineers should still verify the maximum expected signal amplitude and ensure that supply sequencing matches the operating requirements described in the datasheet. This page consolidates verified distributor specifications, manufacturer product information, package details, pricing, drop-in alternatives, and application guidance. It also distinguishes documented device characteristics from parameters that require confirmation against the latest manufacturer datasheet before release.

RFQ संपर्क
MPC508AU/1K - 8:1 16V Analog Multiplexer | Texas Instruments
MPC508AU/1K

MPC508AU/1K - 8:1 16V Analog Multiplexer | Texas Instruments

The Texas Instruments MPC508AU/1K is a 16-V, 8:1, single-ended, one-channel CMOS analog multiplexer packaged in a 16-pin SOIC. It routes one of eight analog inputs to a common output, provides 1.5 kOhm nominal on-resistance, and supports an analog signal range of ±15 V. The device also includes input overvoltage protection rated at 70 V peak-to-peak, break-before-make switching, no channel interaction during an overvoltage condition, and a true second source. Its operating temperature range is -40°C to +85°C. An analog multiplexer is a switching interface that connects multiple analog signals to one input on an ADC, data converter, measurement instrument, or control system. The MPC508A belongs to the broader CMOS analog-switch and multiplexer hierarchy within interface ICs. In its 8:1 single-ended configuration, three address lines select one of eight input channels, reducing the number of external converter inputs required in multichannel measurement equipment. The principal feature is its 70-V peak-to-peak analog overvoltage protection. This allows an input to exceed the normal ±15 V signal range without damaging the multiplexer or disturbing other channels. Break-before-make switching further improves channel isolation by preventing two channels from being connected together during address transitions. These features are useful when external equipment, fault conditions, or long signal lines can place unexpected voltage on an analog input. The MPC508AU/1K is fabricated as a CMOS analog multiplexer and operates from a 16-V supply. Its stated standby power is 7.5 mW typical, while its nominal on-resistance is 1.5 kOhm. The 16-SOIC package measures approximately 0.295 inches, or 7.50 mm, in width. The /1K ordering code is supplied in tape-and-reel form for automated manufacturing, although the provided data does not state the reel quantity. Typical uses include multiplexed data acquisition, instrumentation, industrial control, test and measurement, and signal-routing circuits where one ADC input can serve several analog sensors. The protected inputs are particularly relevant when connected to external equipment where transient or sustained overvoltage is possible. Engineers should still validate the complete signal path against the absolute maximum ratings because overvoltage protection does not remove the need for suitable source impedance, scaling, and external energy limitation. When laying out a design, route the selected analog output as a short, guarded trace and place the multiplexer close to the ADC or measurement front end. Keep digital address traces away from the analog input and output paths, use a common ground reference, and avoid unnecessary stubs. If source impedance or settling time is important, verify the complete acquisition system rather than relying only on the nominal 1.5-kOhm on-resistance. This page consolidates verified manufacturer and distributor information, practical application guidance, parameter comparisons, and sourcing details. It also clearly identifies where package, pinout, pricing-tier, and drop-in replacement data were not supplied rather than inventing engineering values.

RFQ संपर्क
MPC508AUG4 - 8:1 ±15V Overvoltage-Protected Analog MUX | Texas Instruments
MPC508AUG4

MPC508AUG4 - 8:1 ±15V Overvoltage-Protected Analog MUX | Texas Instruments

Texas Instruments MPC508AUG4 is an 8:1 CMOS analog multiplexer with single-ended 8-channel and differential 4-channel configurations, ±15 V analog signal capability, 1.5 kOhm on-resistance, and a 16-pin SOIC package. It also provides 70 Vpp analog overvoltage protection, break-before-make switching, and no channel interaction during an overvoltage event. These characteristics position it as an interface IC for analog switching, signal routing, test and measurement, data acquisition, industrial control, and instrumentation systems. An analog multiplexer is a semiconductor switching network that connects one of several input terminals to a shared output. In the broad electronics hierarchy, it belongs to analog switches and multiplexers, which are interface ICs used to route signals among sensors, amplifiers, converters, and test equipment. The MPC508AUG4 can support eight single-ended channels or four differential channels, making it useful where multiple inputs must be measured through a common signal chain without duplicating amplifiers or converters. The principal features include 70 Vpp overvoltage protection, a stated analog signal range of ±15 V, 1.5 kOhm on-resistance, and break-before-make operation. The protection circuit allows an analog input to exceed a supply voltage without damaging the device or disturbing the signal path of other channels. Standby power is specified as 7.5 mW typical, making the part suitable for multiplexed systems that disable the analog path during inactive intervals. The device uses CMOS switching elements with separate control logic for selecting the single-ended or differential operating mode. Break-before-make behavior prevents two channels from being connected simultaneously during a transition, reducing signal contention and preserving channel isolation. The overvoltage protection is particularly relevant in external analog systems where transients or wiring errors may exceed the nominal rail-to-rail operating range. Typical uses include multiplexed data acquisition, automated test equipment, industrial process monitoring, instrumentation, and communication or control boards with multiple analog inputs. In each case, the shared output can feed a downstream amplifier, sample-and-hold circuit, or ADC, while the multiplexer reduces the number of analog front-end channels required. Differential operation is useful when the source signals require common-mode rejection or when the selected pair must be treated as one differential measurement. Designers should verify address-decoder transitions, supply sequencing, input overvoltage conditions, and the intended single-ended or differential wiring against the manufacturer datasheet. The 16-pin SOIC footprint simplifies assembly, but signal-path layout and grounding remain important because high-impedance multiplexed nodes can couple noise from adjacent digital control traces. This page combines verified manufacturer and distributor information with same-package alternatives, a practical comparison table, and application-specific design guidance. It also separates documented electrical values from parameters that require confirmation from the datasheet, helping engineers identify what is known and what must be checked before layout or purchasing decisions.

RFQ संपर्क
MPC509AP - 16V 4:1 Differential Analog Multiplexer | Texas Instruments
MPC509AP

MPC509AP - 16V 4:1 Differential Analog Multiplexer | Texas Instruments

The Texas Instruments MPC509AP is a 16 V, 4:1 differential, one-channel analog multiplexer packaged in a 16-pin PDIP. It provides two 1.5 kOhm circuit paths, supports analog signals from -15 V to +15 V, and includes 70 Vpp analog overvoltage protection. The device is designed for instrumentation and test systems where one source must be selected from four differential inputs while preserving signal integrity and preventing channel interaction during overvoltage conditions. An analog multiplexer is a switching IC that routes one of several input signals to a common output under digital control. A differential 4:1 architecture carries two related signal paths simultaneously, allowing common-mode and differential measurements, programmable gain stages, data acquisition, and automated test equipment. The MPC509AP combines this function in a through-hole PDIP package, making it suitable for conventional PCBs, prototypes, and legacy industrial systems. Key features include 70 Vpp analog overvoltage protection, break-before-make switching, no channel interaction during overvoltage, an analog signal range of ±15 V, and 7.5 mW typical standby power. These features help protect downstream circuitry and reduce switching transients when the selected input changes. The distributor description identifies the part as a two-circuit IC switch with 1.5 kOhm resistance and a 16-PDIP package. The MPC509 family is intended for precision analog routing where input isolation and controlled transitions are important. Overvoltage protection is especially relevant when external test leads, sensor wiring, or long cables can expose the multiplexer to transients beyond the nominal signal range. Break-before-make switching helps prevent the previous channel and the new channel from being connected simultaneously during selection changes. Typical applications include automated test equipment, data-acquisition systems, process-control interfaces, analog signal routing, instrumentation, and legacy control systems. The ±15 V analog range suits bipolar sensor and measurement circuits, while the differential configuration can reduce common-mode effects when paired with suitable differential amplifiers. System designers should still verify the complete signal path, control levels, pinout, and timing against the manufacturer datasheet. The principal design consideration is ensuring that external transients remain within the device's protected and operating conditions. Place appropriate input protection and grounding close to the package, and use the manufacturer-specified control and address sequencing for stable channel selection. This page combines verified distributor descriptions, manufacturer product information, and practical engineering guidance for engineers evaluating the MPC509AP.

RFQ संपर्क
MPC509AU - ±15V 4:1 Differential Analog Mux | Texas Instruments
MPC509AU

MPC509AU - ±15V 4:1 Differential Analog Mux | Texas Instruments

The Texas Instruments MPC509AU is a 4:1 differential, one-channel CMOS analog multiplexer with a 16-V supply rating, 1.5-kOhm on-resistance, and 70-Vpp analog overvoltage protection, housed in a 16-pin SOIC package. It selects one of four differential input pairs for a single-ended or differential downstream measurement path. An analog multiplexer is a semiconductor switch that routes multiple analog signals to a shared input. A differential-input multiplexer connects paired signals while preserving common-mode relationships, making it useful for instrumentation, data acquisition, test systems, and signal-conditioning circuits. The MPC509AU operates in the broader hierarchy of analog multiplexer, analog switch, interface IC, and semiconductor. Key verified features include an analog signal range of ±15 V, break-before-make switching, no channel interaction during overvoltage, and a typical standby power of 7.5 mW. The 1.5-kOhm on-resistance is suitable for moderate-impedance sensing paths, although cable charge injection, off-state leakage, switching time, and channel capacitance should be checked against the source and acquisition circuitry. The MPC509A is a four-channel differential-input multiplexer, while the related MPC508A is an eight-channel single-ended multiplexer. The MPC509AU is identified by DigiKey as a two-circuit IC switch with 4:1 operation, 1.5 kOhm resistance, and a 16-SOIC package. The manufacturer product page describes the device as a 16-V, 4:1 differential, one-channel analog multiplexer. Typical applications include multiplexed sensor acquisition, automated test equipment, instrumentation signal routing, and systems that require controlled selection of several differential sources. Because the analog inputs can exceed the supply voltage without damaging the signal path, the part is particularly relevant when input transients or offset conditions are possible. Designers should protect control and supply pins from excessive voltage, maintain the documented supply and signal limits, and place the multiplexer where trace capacitance and leakage remain controlled. Input filtering and impedance matching should be evaluated together with the 1.5-kOhm on-resistance. This page combines verified manufacturer and distributor information with selection guidance and engineering design notes.

RFQ संपर्क
MPC509AU/1K - 4:1 Differential Analog Mux | Texas Instruments
MPC509AU/1K

MPC509AU/1K - 4:1 Differential Analog Mux | Texas Instruments

Texas Instruments MPC509AU/1K is a 4:1 differential CMOS analog multiplexer with a 16 V power supply, eight single-ended input channels, and four differential input channels. It provides a 1.5 kOhm on-resistance, ±15 V analog signal range, and up to 70 V peak-to-peak input overvoltage protection in a 16-pin SOIC package. The operating temperature range is -40°C to 85°C. An analog multiplexer is an interface IC that routes one of several analog inputs to an output using digital address and enable controls. Within the interface-IC hierarchy, the MPC509AU/1K is a CMOS switch and multiplexing component. Its differential configuration supports balanced or complementary signals, while its single-ended capability permits eight inputs to be selected when a differential output is not required. Break-before-make switching and no channel interaction during overvoltage improve signal-path integrity. The principal electrical features include a 16 V supply rating, ±15 V analog input range, 1.5 kOhm on-resistance, 70 V peak-to-peak overvoltage protection, and typical standby power of 7.5 mW. These characteristics make the device suitable for instrumentation, test systems, data acquisition, industrial control, and signal-routing boards where multiple analog sources must share a limited number of downstream converter or measurement channels. The MPC509AU/1K belongs to the MPC508A and MPC509A family of CMOS analog multiplexers. The MPC509A implements differential multiplexing, while the related MPC508A provides eight-channel single-ended multiplexing. Address decoding determines the selected channel, while enable control connects or isolates the common terminals. The input-protection architecture is specifically intended to limit disturbance on other channels when an analog input exceeds a supply rail. Typical applications include multiplexed sensor acquisition, automated test equipment, process-control systems, and communication or instrumentation interfaces. In a data-acquisition circuit, the selected differential pair can feed a measuring frontend while unused inputs remain isolated. In industrial equipment, the overvoltage-protection feature adds robustness when external wiring can expose the mux to transients. Designers should still verify signal amplitude, switching timing, and injection-error limits for their particular source impedance and measurement bandwidth. For a robust design, keep input and output routing away from high-current switching nodes, use a low-impedance return path, and account for the approximately 1.5 kOhm channel resistance when designing amplifier gain. The SOIC package requires adequate spacing between adjacent channels to minimize crosstalk and thermal gradients. System supply sequencing should keep control inputs in defined states whenever an analog input may exceed the supply voltage. This page combines the verified manufacturer and distributor information for MPC509AU/1K with package, environmental, sourcing, and engineering context. It also distinguishes verified ordering variants from genuinely pin-compatible substitutes, avoiding unsupported claims that a differently packaged or electrically different device is a drop-in replacement.

RFQ संपर्क
MPC509AUG4 - 4:1 CMOS Analog Multiplexer | Texas Instruments
MPC509AUG4

MPC509AUG4 - 4:1 CMOS Analog Multiplexer | Texas Instruments

The Texas Instruments MPC509AUG4 is a 4:1 analog multiplexer switch IC with an on-resistance of 1.5 kOhm, packaged in a 16-pin SOIC. It supports single-ended 8-channel or differential 4-channel operation, provides analog overvoltage protection up to 70 Vpp, and operates with an analog signal range of ±15 V. The device also uses break-before-make switching to prevent channel interaction during overvoltage conditions. An analog multiplexer is a semiconductor switch that connects one of several input terminals to a common output. The MPC509AUG4 belongs to the interface IC hierarchy because it controls signal routing between analog inputs and downstream measurement or conversion circuitry. Its differential 4-channel configuration reduces common-mode pickup and supports balanced systems, while the single-ended mode provides greater channel availability when the source signals are referenced to a common ground. Key features include a 1.5 kOhm switch resistance, 70 Vpp analog overvoltage protection, ±15 V analog signal capability, and low standby power of 7.5 mW typical. Break-before-make operation is particularly useful when an input may exceed the active supply range because it prevents the transient from coupling directly into another selected channel. The CMOS implementation supports low-power signal-routing systems while maintaining bidirectional analog paths. The MPC509AUG4 is implemented as two 4:1 switch circuits, enabling an 8:1 single-ended configuration or a 4:1 differential configuration when paired channels are connected appropriately. Break-before-make sequencing limits overlapping conduction during selection changes. The 70 Vpp protection capability concerns analog overvoltage tolerance and should not be interpreted as permission to exceed the device's specified supply-voltage or absolute-maximum limits. Typical applications include multiplexed data acquisition, instrumentation, industrial control, battery or automotive test systems, communications equipment, and precision measurement platforms. In a measurement circuit, the device can reduce the number of analog front-end input channels presented to an ADC, while its differential mode helps preserve signal integrity in balanced sensor systems. Standby power of 7.5 mW typical is useful when power consumption must remain controlled between measurement operations. PCB design should keep analog traces short and away from switching nodes and high-current return paths. Confirm the exact supply limits, control-logic levels, channel truth table, switch resistance variation, and package pin assignment in the manufacturer datasheet before layout release. Because the provided web data does not expose a complete pin list, designers must not infer pin assignments from distributor category labels. This page consolidates verified distributor identity, functional configuration, package information, protection features, procurement links, and design cautions into an engineering-focused reference. It also distinguishes confirmed drop-in data from specifications that still require confirmation from the official manufacturer datasheet.

RFQ संपर्क