उत्पाद (44,000+)

MSP430A025IPM - 16-Bit 8MHz Mixed-Signal MCU | Texas Instruments
MSP430A025IPM

MSP430A025IPM - 16-Bit 8MHz Mixed-Signal MCU | Texas Instruments

The Texas Instruments MSP430A025IPM is a 16-bit mixed-signal microcontroller operating at up to 8MHz, with 32KB of flash memory, 2KB of RAM, and a 64-LQFP package measuring 10mm by 10mm. It combines an embedded MCU with mixed-signal processing resources for compact control systems that require efficient local sensing, timing, and digital control. A mixed-signal microcontroller is a semiconductor device that integrates digital control functions with analog and peripheral resources. In the broader product hierarchy, the MSP430A025IPM is a microcontroller, an embedded processing IC, and a member of the semiconductor category. Its architecture is suited to industrial control, metering, instrumentation, and low-energy embedded systems where local computation must operate alongside analog signal acquisition and precise timing functions. Key device characteristics include a 16-bit processor, an 8MHz clock rating, 32KB of flash organized as 32K by 8 bits plus 256 bytes, 2KB of RAM, and two timers. The 64-LQFP package provides 64 gull-wing terminals and supports compact, surface-mounted PCB layouts. The industrial temperature grade supports applications across the industrial equipment range, while the mixed-signal designation supports designs that connect sensing, conversion, and control functions without relying on a separate discrete controller. The MSP430 platform centers on an integrated 16-bit RISC processing environment. Its flash memory provides nonvolatile program storage for firmware, while the 2KB RAM supports stack operations, data buffers, and working variables. The two timers can support periodic control tasks, event timing, or input-capture and output-comparison functions. Exact pin assignments, clock requirements, conversion characteristics, and peripheral limits should be confirmed against the manufacturer datasheet before PCB release. Typical applications include industrial panel meters, temperature-measurement instruments, portable diagnostic equipment, sensor-conditioning controllers, battery-powered monitors, and compact embedded control modules. The 8MHz processing ceiling supports responsive digital control, while the mixed-signal integration is useful when analog measurement and control logic must coexist within a small board area. A critical design step is to assign every terminal according to the 64-pin datasheet diagram and preserve the required decoupling and signal-routing practices. Confirm the selected analog and digital functions, exposed interfaces, operating voltage limits, clock configuration, and programming method before schematic and layout completion. This page combines the device specifications, application guidance, same-family drop-in options, and engineering design considerations needed to evaluate the MSP430A025IPM for a new embedded control design.

RFQ संपर्क
MSP430A026IPM - 16-Bit 8MHz 60KB MCU | Texas Instruments
MSP430A026IPM

MSP430A026IPM - 16-Bit 8MHz 60KB MCU | Texas Instruments

The Texas Instruments MSP430A026IPM is a 16-bit mixed-signal RISC microcontroller with an 8 MHz clock, 60 KB flash memory and 2 KB RAM in a 64-LQFP 10 mm x 10 mm package. It also includes a 12-bit ADC, 256 bytes of information flash and support for 2.5 V and 3.3 V operation. These characteristics place it in the MSP430x1xx family of low-power embedded controllers for industrial sensing, instrumentation and compact control systems. A mixed-signal microcontroller is an embedded semiconductor that combines a digital processor core with analog peripherals. The processor executes firmware, while the ADC converts analog sensor signals into digital values for processing. In the broader hierarchy, this device is a microcontroller, an embedded processing IC and a mixed-signal system-on-chip designed to reduce the number of separate components required in measurement and control equipment. The MSP430A026IPM provides 60 KB of flash for firmware and constants, 2 KB of RAM for working data and 256 bytes of information flash for configuration or identification data. Its 16-bit RISC architecture, 8 MHz maximum clock and 12-bit ADC support responsive acquisition while keeping the device focused on embedded control rather than high-performance computing. The 64-LQFP package also provides more I/O and analog connectivity than smaller microcontroller packages. The MSP430 architecture is associated with low-power embedded designs because it can retain state in RAM and react to interrupt-driven events. This is useful in systems that spend substantial time waiting for sensors, operator input or scheduled events. Exact standby current, active current, timer channels, I/O count and operating-temperature limits must be confirmed in the manufacturer datasheet before final power-budget or safety qualification. Typical uses include industrial process monitoring, portable instrumentation, low-power sensor acquisition, digital panel equipment and low-speed control loops. The 12-bit ADC is especially relevant to temperature, level, pressure and current sensing, while the 60 KB flash capacity accommodates more application code than many entry-level MSP430 variants. The 64-pin package is useful when a design needs both analog inputs and a broad set of general-purpose digital interfaces. PCB implementation should follow the manufacturer land pattern and pin-description table exactly. Place the required decoupling capacitors close to their designated supply pins, route sensitive analog inputs away from switching nodes and high-current outputs, and provide a continuous ground reference beneath the device. Confirm which pins are multiplexed for ADC functions before assigning analog channels in the PCB schematic. This product page combines the confirmed memory, speed, ADC, voltage and package characteristics with practical design guidance, application fit, sourcing information and a focused comparison against verified same-family alternatives. It is intended to help engineers identify whether the MSP430A026IPM matches the required embedded-control architecture before moving to detailed datasheet verification.

RFQ संपर्क
MSP430A048IPM - 16-Bit 8MHz MCU | Texas Instruments
MSP430A048IPM

MSP430A048IPM - 16-Bit 8MHz MCU | Texas Instruments

Texas Instruments MSP430A048IPM is a 16-bit ultra-low-power mixed-signal microcontroller operating at up to 8 MHz, with 8 KB of flash memory, 256 bytes of RAM, and a 64-LQFP 10 x 10 mm package. According to the manufacturer datasheet, it also integrates a comparator and supports up to 96 LCD segments. The combination of a 16-bit CPU, mixed-signal peripherals, segmented LCD drive capability, and compact package makes the device suitable for compact, low-power instruments, meters, industrial control panels, and embedded measurement systems. A mixed-signal microcontroller is an embedded processing device that combines a digital CPU and program memory with analog and communication peripherals on one chip. The MSP430A048IPM belongs to the MSP430 mixed-signal microcontroller family. Its low-power architecture is designed for systems that spend much of their operating time measuring, displaying information, responding to inputs, or waiting between user actions. Rather than continuously executing computationally intensive work, an MSP430-based product can use low-power operating modes to reduce energy consumption. The device provides 8 KB of flash memory organized as 8K x 8 plus an additional 256 bytes, together with 256 bytes of RAM. Its 16-bit processing architecture supports efficient control operations while operating at up to 8 MHz. Integrated analog resources include a comparator, while the LCD capability can drive as many as 96 segments. These functions reduce the need for separate display drivers and analog interface components in suitable panel-based designs. Exact supply voltage, current, timing, and peripheral details should be confirmed in the manufacturer datasheet before circuit design. The MSP430A048IPM is particularly relevant to low-power mixed-signal products because the CPU, flash, RAM, comparator, and LCD interface are integrated in one device. The 64-LQFP package provides 64 available package positions and is larger than the smallest packages in the MSP430 portfolio, making it practical where adequate component spacing, test access, and manual assembly are priorities. Because no complete pin-description table appears in the product listings, the package drawing should be checked against the manufacturer datasheet before assigning tracks or test points. Typical uses include compact digital multimeters, panel meters, portable environmental monitors, industrial measurement instruments, and human-machine-interface controllers. The LCD segment capability is particularly useful for dedicated numerical displays, while the comparator can support threshold detection, signal conditioning, or basic control functions. In a portable meter, the MCU could acquire a sensor signal, evaluate it, update a segmented display, and enter a low-power state between measurement events. Firmware and peripheral selection must be checked against the complete device documentation. A key design consideration is the balance between memory capacity and functionality. With 8 KB of flash and 256 bytes of RAM, this MCU is intended for compact control code rather than large buffers, complex graphical interfaces, or heavy connectivity stacks. Designers should reserve flash for interrupt handlers and time-critical routines, avoid unnecessary RAM copies, and validate every peripheral configuration against the datasheet. The 64-LQFP footprint also requires a PCB land pattern and pin assignment based on the official package drawing. This product page combines the exact manufacturer and distributor identity, memory and packaging details, comparator and LCD capabilities, application guidance, and a conservative replacement assessment. It separates confirmed device characteristics from parameters that require direct datasheet review, helping engineers plan a mixed-signal design while reducing the risk of assuming unverified pin or electrical details.

RFQ संपर्क
MSP430A051IPM - 8MHz 16-Bit MCU | TI | Embedded Control
MSP430A051IPM

MSP430A051IPM - 8MHz 16-Bit MCU | TI | Embedded Control

Texas Instruments MSP430A051IPM is a 16-bit ultra-low-power microcontroller with an 8 MHz operating frequency, 16 KB of flash memory, 512 bytes of RAM, a 12-bit ADC, and a 64-pin LQFP package measuring 10 mm by 10 mm. It combines a compact RISC processor, mixed-signal peripherals, and low-power operation for embedded sensing, measurement, and control systems. An ultra-low-power microcontroller is a semiconductor designed to complete control tasks while consuming very little electrical power. The MSP430 belongs to the broader hierarchy of embedded microcontroller, processor, and semiconductor devices. Its architecture supports event-driven execution, allowing software to remain in a low-power state until a timer, comparator, serial-interface event, or external interrupt requires service. Key features include 16 KB of flash memory for program storage, 512 bytes of RAM for working data, and a 12-bit analog-to-digital converter for sensor and analog-voltage measurements. A USART supports serial communication with sensors, displays, data loggers, and host systems. The stated 1.8 V to 3.6 V operating range supports low-voltage embedded designs, while the -40°C to +85°C temperature range covers industrial-temperature environments. The MSP430A051IPM combines a 16-bit RISC core with integrated mixed-signal resources in one 64-LQFP device. Flash memory supports in-circuit programming and firmware retention, while RAM provides space for stack operations, acquisition buffers, and control variables. The 8 MHz clock provides a practical balance between instruction throughput, active current, and the ability to remain idle between events. Typical applications include battery-powered sensor nodes, industrial measurement instruments, compact data loggers, building and access-control modules, and low-power monitoring equipment. The 12-bit ADC is especially useful when the design must acquire analog inputs without adding a separate converter. The USART can connect the controller to external sensors or a host processor using a documented serial protocol. PCB design should preserve short analog and power paths, with the device ground and analog reference connections following the pin-description table in the manufacturer datasheet. Place decoupling capacitors close to the supply pins, route sensitive analog inputs away from switching nodes, and include programming access for the supported flash-programming interface. Verify unused-pin handling and termination requirements before releasing the layout. This page combines operating characteristics, family-level replacement options, package guidance, application analysis, and practical PCB design notes to support faster component selection, firmware planning, and hardware bring-up.

RFQ संपर्क
MSP430A064IPM - 16-Bit 8MHz MCU with 48KB Flash | TI
MSP430A064IPM

MSP430A064IPM - 16-Bit 8MHz MCU with 48KB Flash | TI

Texas Instruments MSP430A064IPM is a 16-bit RISC microcontroller built for low-power embedded control, with an 8 MHz operating speed, 48 KB of flash memory including 256 bytes, 2 KB of RAM, and a 64-pin LQFP package. The device belongs to the MSP430 family of mixed-signal microcontrollers and combines a 12-bit ADC, two USARTs, and a hardware multiplier in a compact industrial-temperature component. An MSP430 microcontroller is a mixed-signal embedded-processing device designed to measure, control, and communicate while operating with low energy consumption. The MSP430 architecture integrates a 16-bit RISC core, analog conversion, timing, serial communication, and GPIO resources on one chip. Within the broader semiconductor hierarchy, it is a microcontroller, embedded processor, and mixed-signal IC intended to replace combinations of discrete analog and digital components in compact embedded systems. The MSP430A064IPM provides 48 KB of flash for firmware, 2 KB of RAM for working data, and an 8 MHz maximum operating frequency. Its 12-bit ADC supports embedded measurement functions, while two USARTs provide serial communication channels for sensors, external converters, programming equipment, or data acquisition systems. The hardware multiplier supports efficient multiplication in control and signal-processing routines, and the 64-LQFP package exposes a broad set of I/O and peripheral connections. The part is identified for industrial-temperature operation from -40°C to +85°C and operates from 2.2 V to 3.3 V according to the product listing information. A 64-pin gull-wing LQFP package supports conventional surface-mount assembly while providing more external pins than smaller MSP430 packages. The combination of flash memory, RAM, ADC channels, serial interfaces, and a maximum 8 MHz clock makes the device suitable for compact control systems that need local sensing and communications without a higher-power processor. Typical applications include industrial sensor nodes, low-power data loggers, building automation endpoints, battery-operated measurement instruments, motor and process control, and embedded communications equipment. The two USARTs can manage multiple serial links, while the ADC can acquire analogue sensor inputs without requiring a separate converter. Software should budget memory carefully because the 48 KB flash and 2 KB RAM are sufficient for focused control tasks rather than demanding graphical interfaces or large data buffers. Design the PCB with short analogue input routes, adequate bypassing at the power pins, and careful grounding around the ADC. Confirm the exact pin functions and multiplexing constraints against the manufacturer pin description before assigning signals. Programme the device with a toolchain compatible with the MSP430 architecture, and validate clock, analogue, serial, and low-power settings across the intended temperature range. This page organizes the verified technical characteristics, pin-package details, sourcing information, drop-in alternatives, comparison parameters, and practical design guidance for engineers evaluating the MSP430A064IPM. It also distinguishes exact ordering information from broader MSP430 family options, helping designers assess PCB reuse, firmware portability, peripheral requirements, and supply continuity before committing a design.

RFQ संपर्क
MSP430A079IPN - 16-Bit 8 MHz MCU | Texas Instruments
MSP430A079IPN

MSP430A079IPN - 16-Bit 8 MHz MCU | Texas Instruments

Texas Instruments MSP430A079IPN is a 16-bit embedded microcontroller with an 8 MHz maximum clock frequency, 48 KB of flash memory organized as 48K x 8, and 256 bytes of additional memory, supplied in an 80-pin LQFP package measuring 12 x 12 mm. The device belongs to the MSP430 mixed-signal microcontroller family and combines a low-power RISC-style embedded architecture with integrated mixed-signal resources for measurement and control applications. An MCU is a semiconductor device that integrates a processor core, program memory, data memory, peripherals, and I/O in one package. Within the embedded-control hierarchy, the MSP430A079IPN sits between a general-purpose microprocessor and a fixed-function logic device. Its 16-bit architecture provides a practical balance of processing capability, memory capacity, and compact embedded control, while the mixed-signal family is commonly used where analog measurements and digital control must share one system. The three principal headline specifications are an 8 MHz operating speed, 48 KB of flash program memory, and an 80-pin LQFP footprint. The flash memory can retain firmware without a separate external program-memory device, while the 80-pin package provides substantially more I/O and peripheral connectivity than a small 8-pin or 16-pin microcontroller package. The manufacturer describes the part as an MSP430x4xx-series MCU with 48K x 8 flash and 256 bytes of additional memory. The device architecture supports embedded acquisition, monitoring, and control rather than general-purpose desktop computing. Its analog and digital resources are intended to reduce the number of external components in instrumented systems, while its 16-bit datapath provides useful precision for control calculations. Exact peripheral assignments, timer resources, converter performance, clock limits, and electrical ratings should be taken from the pin-description table and electrical-characteristics tables in the Texas Instruments MSP430A079IPN datasheet. Typical application areas include industrial sensor modules, compact data-acquisition equipment, building-control interfaces, portable instrumentation, and low-power embedded monitoring devices. The 48 KB embedded flash capacity is useful for moderate firmware sizes, while the 12 x 12 mm LQFP package supports conventional surface-mount assembly and a generous pin count for external sensors, displays, communications, and actuators. PCB design should begin with the manufacturer pin-description table, decoupling requirements, clock configuration, and exposed thermal-pad guidance. Confirm every signal, supply pin, analog reference, and programming connection against the exact IPN package before layout release; similar MSP430 family members can differ in pin availability and peripheral multiplexing. This page consolidates the confirmed 16-bit architecture, 8 MHz clock rating, 48 KB flash configuration, 256-byte memory feature, 80-LQFP packaging, sourcing information, pinout considerations, and replacement guidance to support faster engineering and procurement evaluation.

RFQ संपर्क
MSP430A095IPN - 16-Bit 8MHz Mixed-Signal MCU | Texas Instruments
MSP430A095IPN

MSP430A095IPN - 16-Bit 8MHz Mixed-Signal MCU | Texas Instruments

Texas Instruments MSP430A095IPN is a 16-bit mixed-signal microcontroller with an 8 MHz operating speed, 48 KB of flash program memory, and 48 general-purpose I/O pins in an 80-LQFP 12 x 12 mm package. It integrates SPI, UART/USART, brown-out detection and reset, DMA, an LCD interface, power-on reset, PWM, and a watchdog timer for compact embedded control systems. A mixed-signal microcontroller combines a digital processing core with peripherals that acquire, process, or control mixed analog and digital signals. The MSP430 architecture belongs to the microcontroller hierarchy and is commonly used as a low-power embedded controller, while its integrated peripherals reduce the need for separate support devices. MSP430A095IPN is designed for designs that require more I/O and flash capacity than smaller members of the MSP430 family. The device's 16-bit RISC core operates at up to 8 MHz, providing a practical balance between processing throughput, power consumption, and design simplicity. Its 48 KB flash memory supports firmware, constants, and configuration data, while the integrated peripheral set supports communication, timing, and mixed-signal control tasks. Forty-eight I/O pins give a board designer substantial connectivity without requiring a larger package. Communication and control resources include SPI and UART/USART interfaces, direct-memory-access support, multiple PWM channels, a watchdog timer, power-on reset, and brown-out detection with reset. The LCD interface expands the range of display-based instruments that can be implemented directly. Together, these blocks reduce external component count in sensor nodes, measurement systems, industrial controls, and compact embedded products. Typical applications include low-power sensor acquisition, industrial monitoring, portable measurement instruments, connected control modules, and embedded products that combine serial communication with LCD feedback. The 48 KB flash capacity allows a meaningful firmware footprint, while 48 I/O pins support buttons, indicators, sensors, actuators, and logic interfaces. The mixed peripheral set is particularly useful when board area and component count are important constraints. PCB design should preserve clean power distribution and short, controlled signal paths around the MCU. Place decoupling capacitors close to the supply and ground pins, route sensitive analog and communication lines away from fast-switching nodes, and follow the manufacturer package and layout guidance in the MSP430A095IPN datasheet. Confirm the pin assignment, exposed-pad requirements, voltage limits, and decoupling values for the exact board configuration before release. This product page combines the MSP430A095IPN core specifications, package details, application guidance, drop-in replacement options, and practical design considerations in one engineering-focused reference. It helps designers evaluate whether the device's 8 MHz processing speed, 48 KB flash memory, 48 I/O pins, and integrated mixed-signal peripherals align with a new embedded-control design.

RFQ संपर्क
MSP430A155IPZ - 16-Bit 25MHz 64KB MCU | Texas Instruments
MSP430A155IPZ

MSP430A155IPZ - 16-Bit 25MHz 64KB MCU | Texas Instruments

The Texas Instruments MSP430A155IPZ is a 16-bit embedded microcontroller with a 25 MHz CPU, 64 KB of flash program memory, and a 100-LQFP package measuring 14 x 14 mm. Its MSP430F6xx family positioning combines low-power embedded control with 72 I/O pins and connectivity including I2C, IrDA, LIN bus, SCI, SPI, and UART/USART. A microcontroller is a semiconductor that integrates a processor core, nonvolatile program memory, data memory, I/O ports, and peripherals on one device. In the product hierarchy, the MSP430A155IPZ is a 16-bit RISC-based MCU within the MSP430 family and the broader embedded-controller category. It executes firmware from flash while using integrated communication, timing, watchdog, brown-out, DMA, LCD, and PWM resources. Key verified features include 64 KB of flash organized as 64K x 8, a 16-bit core, operation up to 25 MHz, and 72 I/O pins. The connected peripherals include I2C, IrDA, LIN bus, SCI, SPI, and UART/USART. Additional listed resources include brown-out detection and reset, DMA, an LCD interface, power-on reset, PWM, and a watchdog timer. These peripherals reduce the need for discrete interface components in connected embedded systems. The MSP430 architecture provides an RISC processor core identified as CPUXV2 in the supplied technical summary. Its 25 MHz operating speed gives it substantially more processing headroom than lower-frequency 8-bit control devices, while the 16-bit instruction and data path is well suited to compact control firmware. Because detailed clock, RAM, voltage, timing, and electrical limits were not included in the verified source text, they should be confirmed against the manufacturer datasheet before design release. Typical uses include industrial sensor controllers, LIN-connected nodes, serial bridges, low-power data loggers, compact motor or actuator controllers, and communications modules. The broad interface set permits connection to sensors, displays, transceivers, and external storage while the LCD and PWM resources support local human-interface and output-control functions. The primary design consideration is pin planning across the 100-LQFP footprint. Designers should preserve the MSP430A155IPZ power, ground, decoupling, programming, reset, crystal, and peripheral assignments shown in the official pinout. Because this is a 14 x 14 mm gull-wing package, PCB routing needs adequate escape space and assembly clearance. This page consolidates the verified distributor specifications, sourcing information, application context, and compatibility limits for MSP430A155IPZ. It also distinguishes confirmed specifications from data that still requires datasheet-level engineering verification.

RFQ संपर्क
MSP430F110IDW - 16-Bit 8 MHz MCU | Texas Instruments
MSP430F110IDW

MSP430F110IDW - 16-Bit 8 MHz MCU | Texas Instruments

The Texas Instruments MSP430F110IDW is a 16-bit RISC mixed-signal microcontroller with an 8 MHz maximum clock, 1 KB of flash program memory, 128 bytes of RAM, and a 20-pin SOIC package. Its low-supply-voltage design operates from a 3.6 V maximum supply, making it suitable for compact, low-power embedded systems that require deterministic control and mixed-signal measurement capabilities. A mixed-signal microcontroller combines a digital microprocessor core with analog and timing peripherals on one integrated device. The MSP430 belongs to the broader hierarchy of embedded processor, microcontroller, and semiconductor categories. Its 16-bit RISC architecture supports efficient instruction execution, while the integrated clock, memory, and mixed-signal peripherals reduce the number of discrete components required in a measurement or control design. Key characteristics include an 8 MHz clock capability, a 125 ns instruction-cycle time, 1 KB of flash memory organized as 1K x 8 plus 128 bytes of RAM, and a 3.6 V maximum low-supply voltage. The device also supports standby and low-power off operation, including a stated 0.1 µA off current with RAM retention. These characteristics make it useful for low-duty-cycle sensing, control, metering, and embedded measurement systems. The MSP430 architecture emphasizes efficient mixed-signal system design through its basic clock module, 16-bit RISC processing, and integrated low-power operating modes. Its 128-byte RAM supports stack, variables, and short working data sets, while flash provides nonvolatile program storage. At an 8 MHz maximum clock, the stated 125 ns instruction-cycle time corresponds to a fast instruction execution rate, allowing the core to service timing-sensitive peripheral operations without an external processor. Typical applications include low-power sensor nodes, compact industrial measurement instruments, battery-operated monitoring equipment, digital meters, and embedded control modules. The MSP430F110IDW can also serve as the central controller in designs where compact package size, low standby demand, and integrated analog measurement functions matter more than large memory capacity or extensive connectivity. Designers should verify the exact pin assignment and peripheral multiplexing in the Texas Instruments MSP430F110 datasheet before laying out a PCB. Because the device provides only 1 KB of flash and 128 bytes of RAM, firmware must remain compact, interrupt service routines should be efficient, and application code must avoid unnecessary buffering. The 20-pin SOIC footprint simplifies assembly but requires careful assignment of communication, analog, clock, and debug functions among the available pins. This product page combines the exact MSP430F110IDW device identity, package and memory details, verified pricing channels, replacement assessment, and practical design guidance. It also highlights where similarly named MSP430 devices share the 20-pin SOIC footprint and where their available functions and memory resources must be checked before a replacement is approved.

RFQ संपर्क
MSP430F110IPW - 8MHz 16-Bit MCU | TI | Embedded Control
MSP430F110IPW

MSP430F110IPW - 8MHz 16-Bit MCU | TI | Embedded Control

The Texas Instruments MSP430F110IPW is an ultra-low-power 16-bit RISC microcontroller with an 8MHz maximum clock, 1KB of Flash memory, 128 bytes of RAM, and a 20-pin TSSOP package. It is designed for compact embedded products where low supply voltage, fast wake-up, and multiple low-power operating modes are important. A microcontroller is a programmable semiconductor that integrates a CPU, memory, I/O, timers, and other peripherals on one device. The MSP430 belongs to the embedded-processing hierarchy: MCU → 16-bit RISC microcontroller → ultra-low-power embedded controller. Its reduced instruction set, 16-bit registers, and 125ns instruction-cycle time support deterministic control operations in portable measurement and low-energy sensor systems. The MSP430F110IPW combines 1KB of Flash for program storage with 128 bytes of RAM for working data. Its Basic Clock Module supports clock selection needed by portable systems, while its integrated peripherals reduce external component count. The device operates from a low supply voltage range with a stated 3.6V value and is specified in a 20-pin TSSOP package for surface-mount assembly. Ultra-low-power operation is central to the architecture. The MSP430 family supports five low-power modes optimized for extended battery life. The documented off-state retention current is 0.1µA, and the device can wake from standby to resume measurement or control activity. This combination of low voltage, low-power states, and rapid wake-up is more important than peak processing throughput in many portable applications. Typical uses include battery-powered meters, compact environmental sensors, handheld instrumentation, simple control panels, and low-duty-cycle embedded nodes. The 128-byte RAM is suitable for compact working sets, while the 1KB Flash capacity is best matched to focused control logic rather than large buffers or demanding human-interface firmware. The 8MHz clock also allows the CPU to complete periodic measurement and signal-processing tasks between extended standby intervals. Designers should budget memory before committing to application code, ensure firmware fits the 1KB Flash and 128-byte RAM limits, and plan decoupling and PCB layout around the TSSOP footprint. Verify the complete pin description, operating limits, clock setup, and low-power-mode conditions in the manufacturer datasheet before a new board is released. This product summary connects the MSP430F110IPW's memory, clock, power-management, package, and sourcing characteristics with practical design guidance. It also distinguishes verified same-family alternatives from replacements that would require a different footprint or software review.

RFQ संपर्क
MSP430F1122IPW - 8MHz 16-Bit Mixed-Signal MCU | Texas Instruments
MSP430F1122IPW

MSP430F1122IPW - 8MHz 16-Bit Mixed-Signal MCU | Texas Instruments

Texas Instruments MSP430F1122IPW is an ultra-low-power 16-bit mixed-signal microcontroller with an 8 MHz MSP430 CPU, 4 KB of Flash memory, 256 bytes of SRAM, a 10-bit ADC, and UART/SPI communication in a 20-pin TSSOP package. It is designed for compact embedded systems requiring analog measurement, timing, and low-power control in a compact footprint. A mixed-signal microcontroller combines a digital microcontroller core with analog peripherals such as an ADC and integrated reference. The MSP430F1122IPW belongs to the MSP430 family of ultra-low-power microcontrollers, using a 16-bit RISC architecture and 16-bit registers to improve code efficiency for embedded control, sensing, and measurement applications. Its integrated communication peripherals also reduce the need for separate interface devices. The 8 MHz operating speed provides dedicated processing performance for control loops and measurement tasks. The 4 KB Flash memory supports embedded firmware, while 256 bytes of SRAM provides working memory for stack, variables, and data handling. The integrated 10-bit ADC includes a reference and data transfer controller, while the mixed-signal feature set supports applications combining digital logic with analog front ends. The MSP430F1122IPW is suitable for low-power sensing, industrial instrumentation, appliance control, and embedded measurement systems. Its 20-pin TSSOP package makes it practical for compact PCB layouts where component count and board area are important. The integrated UART and SPI peripherals simplify connection to sensors, displays, transceivers, and other digital peripherals without requiring separate communication controllers. Designers should pay attention to the available 4 KB Flash memory when sizing firmware, especially when combining application code, calibration data, and communication routines. The ADC, timer, and communication blocks should be assigned according to the manufacturer's pin and peripheral guidance. Decoupling and analog grounding should be planned carefully around the mixed-signal section to preserve measurement quality. This product page combines the MSP430F1122IPW technical characteristics, package information, compatible alternatives, and practical design guidance. It is intended to help engineers identify the correct MCU for low-power embedded applications and plan a robust implementation around the manufacturer's MSP430F11x2 and MSP430F12x2 mixed-signal controller documentation.

RFQ संपर्क
MSP430F112IDW - 8MHz 16-Bit MCU, 4KB Flash | Texas Instruments
MSP430F112IDW

MSP430F112IDW - 8MHz 16-Bit MCU, 4KB Flash | Texas Instruments

The Texas Instruments MSP430F112IDW is an 8 MHz, 16-bit mixed-signal microcontroller with 4KB Flash memory, 256B SRAM, timer and comparator resources, housed in a 20-pin SOIC package. The device is positioned for compact embedded control applications requiring a low-power MCU, deterministic timing and mixed-signal peripheral integration. DigiKey identifies the part as an MSP430 CPU16 microcontroller with MSP430x1xx architecture, 4KB Flash, 256B RAM and 8MHz operation. A microcontroller is a programmable system-on-chip that combines a processor core, memory, digital I/O and peripherals in one integrated component. The MSP430 family uses a 16-bit RISC-oriented embedded-control architecture within the broader semiconductor and embedded-systems hierarchy. Its small memory footprint and low-power design make it suitable for battery-operated instruments, simple control panels, sensor nodes and compact embedded products where cost, board area and energy efficiency matter more than high compute throughput. The available verified data identifies an 8MHz maximum clock, 4KB Flash, 256B SRAM, a timer and a comparator. The 256B SRAM figure is also represented in the distributor description as 4K x 8 plus 256B, indicating memory-oriented catalog information rather than a high-capacity application MCU. The 20-SOIC package supports conventional surface-mount assembly and is compatible with PCB layouts requiring a 20-pin SOIC footprint. The exact pin names, electrical limits, supply voltage, current consumption and timing parameters are not present in the supplied search results and are therefore not inferred here. Typical design uses include low-power sensor acquisition, simple industrial control, battery-powered monitoring, compact instrumentation and embedded control subsystems. The comparator can support threshold-based signal conditioning or simple decision logic, while the timer supports periodic measurement, timing and control functions. Firmware selection should be checked against the device’s exact memory map and peripheral implementation before production release. A key design consideration is to verify the complete pinout, supply limits, clock configuration and peripheral multiplexing against the manufacturer datasheet rather than relying only on distributor catalog summaries. This page distinguishes verified manufacturer/distributor facts from unspecified parameters and avoids presenting guessed electrical values as production specifications. This page consolidates verified manufacturer and distributor information, practical application context, comparison fields and design cautions. It also preserves unresolved electrical details as data-needed markers so engineers can verify them before schematic release or PCB sign-off.

RFQ संपर्क
MSP430F112IPW - 8MHz 16-Bit 4KB MCU | Texas Instruments
MSP430F112IPW

MSP430F112IPW - 8MHz 16-Bit 4KB MCU | Texas Instruments

Texas Instruments MSP430F112IPW is an ultra-low-power, mixed-signal 16-bit RISC microcontroller operating at up to 8 MHz, with 4 KB of Flash memory, 256 bytes of SRAM, and a 20-pin TSSOP (PW) package. Its low supply-voltage range is 1.8 V to 3.6 V, making it suitable for compact battery-powered measurement and control systems. The device combines a timer and comparator with an efficient 16-bit architecture and a 125 ns instruction-cycle time. A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals on one chip. Within the product hierarchy, the MSP430F112IPW is a mixed-signal microcontroller, an embedded controller, and an ultra-low-power MCU. Its architecture and low-power modes are intended to extend battery life in portable measurement applications while providing enough processing performance for digital control, event timing, and analog-signal monitoring. Verified distributor and manufacturer listings identify several engineering highlights: an 8 MHz maximum clock, 4 KB of Flash, 256 bytes of SRAM, a 1.8 V to 3.6 V supply range, a 125 ns instruction cycle, and integrated timer and comparator functions. Listed power characteristics include 200 µA active current at 1 MHz and 2.2 V, 0.8 µA standby current, 0.1 µA off current with RAM retention, and wake-up from standby in less than 6 µs. The MSP430F112 family uses a 16-bit RISC CPU with 16-bit registers. Its timer is useful for periodic sampling, elapsed-time measurement, pulse generation, and control-loop timing, while the comparator can support threshold detection against an external reference. These mixed-signal resources reduce the need for separate discrete timing or comparison components in compact sensor nodes. Typical applications include battery-powered sensor nodes, industrial process-monitoring instruments, portable measurement equipment, smart metering products, and low-power embedded-control systems. The part is particularly appropriate when the design needs deterministic control from a small memory footprint and a supply voltage that can extend down to 1.8 V. When designing around the MSP430F112IPW, verify memory requirements carefully because manufacturer and distributor summaries describe the device family with differing memory figures. The target-part distributor listing specifies 4 KB of Flash and 256 bytes of SRAM, while the TI product-family search result describes a 2 KB Flash and 128-byte SRAM configuration. Confirm the exact memory map against the linked MSP430F11x datasheet before finalizing firmware and PCB allocations. This page combines verified distributor pricing, manufacturer product information, package details, application guidance, and explicit replacement caveats. It distinguishes confirmed drop-in candidates from options that require firmware, memory, or PCB validation, providing practical procurement and design context beyond a basic distributor listing.

RFQ संपर्क
MSP430F1132IPW - 8MHz 16-Bit MCU with 8KB Flash | TI
MSP430F1132IPW

MSP430F1132IPW - 8MHz 16-Bit MCU with 8KB Flash | TI

Texas Instruments MSP430F1132IPW is an ultra-low-power 16-bit mixed-signal microcontroller rated for operation up to 8 MHz, with 8 KB of flash memory, 256 bytes of SRAM, a 10-bit ADC, SPI, UART, and timer peripherals, all housed in a 20-TSSOP package. An ultra-low-power microcontroller is a semiconductor designed to execute embedded control tasks while minimizing energy consumption during active operation, standby, and shutdown. The MSP430 architecture combines a 16-bit RISC CPU, 16-bit registers, and constant generators to improve code efficiency. Its five low-power modes make the device suitable for portable measurement systems where battery life depends on minimizing both processing demand and standby leakage. The MSP430F1132 combines an 8 MHz maximum clock with a 125 ns instruction cycle, giving embedded designs a time-efficient platform for sampling, control, communications, and local data processing. Its 8 KB flash capacity provides on-chip program storage, while 256 bytes of SRAM support working data, stack operations, and peripheral buffering. The integrated 10-bit ADC supports analog measurements without requiring a separate converter. Communication and timing resources broaden the device beyond basic GPIO control. An SPI interface supports synchronous peripheral connections and external data transfer, while UART provides asynchronous serial communication for sensor modules, data acquisition units, and service interfaces. The integrated timer supports periodic events, timing intervals, and deterministic control functions. Together, these resources allow a compact design to replace combinations of smaller discrete components. Typical uses include battery-powered portable instruments, precision data loggers, industrial sensing nodes, compact environmental monitors, and low-power embedded measurement devices. The 10-bit ADC is particularly useful for temperature, pressure, level, and potentiometric sensing, while SPI and UART provide paths to external sensors, signal-conditioning circuits, and host equipment. Designers should select decoupling close to the supply pins, maintain required clock and analog-reference conditions, and review low-current behavior across every operating mode. The 20-TSSOP package supports compact PCB layouts, while the industrial temperature range of -40°C to +85°C supports controlled industrial and measurement environments. This product page combines the device architecture, package and peripheral details, application guidance, drop-in alternatives, and engineering considerations into a focused design reference. It is intended to accelerate component selection while keeping the final firmware, layout, and operating-mode decisions under the engineer's control.

RFQ संपर्क
MSP430F1132IRHBT - 16-bit 8MHz 8KB Flash MCU | TI
MSP430F1132IRHBT

MSP430F1132IRHBT - 16-bit 8MHz 8KB Flash MCU | TI

The Texas Instruments MSP430F1132IRHBT is a 16-bit ultra-low-power RISC mixed-signal microcontroller running at up to 8 MHz with 8KB Flash memory, 256B SRAM, and an industrial-grade 32-pin VQFN (5x5 mm) package (RHBT suffix, grade I, -40C to +85C). An MCU (microcontroller unit) is a single-chip computer that integrates a processor core, memory, and peripherals into one package. Within the power-management hierarchy of embedded systems, ultra-low-power MCUs such as the MSP430 family occupy the battery-operated endpoint of the spectrum, where energy per instruction matters more than raw throughput. Key features include a supply voltage range of 1.8V to 3.6V, five power-saving modes, wake-up from standby in less than 6 microseconds, and an FLL+ frequency-locked loop for flexible clock generation. Ultralow-power figures are exceptional: 200 uA active at 1 MHz and 2.2V, 0.7 uA standby, and 0.1 uA off-mode with RAM retention, extending battery life by years in portable instruments. Technically, the device uses a 16-bit RISC CPU with 16-bit registers and a 125-ns instruction cycle time, paired with a 10-bit ADC, Timer_A, and SPI/UART serial interfaces. The Flash-based memory supports in-system programming, easing field upgrades. The Scan IF capability supports background sensing applications. Typical applications include battery-powered portable measurement instruments, metering front ends, sensor acquisition nodes using the 10-bit ADC, and low-power communication endpoints using SPI/UART. When designing, budget clock sources carefully: the FLL+ lets you trade speed for current, so run at the lowest frequency that meets your real-time deadline. This page synthesizes distributor availability data, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ संपर्क
MSP430F1222IPW - 8MHz 16-Bit MCU with 4KB Flash | Texas Instruments
MSP430F1222IPW

MSP430F1222IPW - 8MHz 16-Bit MCU with 4KB Flash | Texas Instruments

The Texas Instruments MSP430F1222IPW is an 8 MHz, 16-bit ultra-low-power mixed-signal microcontroller with 4 KB of Flash memory, 256 B of SRAM, a 10-bit ADC, timer, SPI, and UART in a 28-pin TSSOP package. It is designed for embedded systems that require compact control, analog measurement, and low-power operation. The MSP430 architecture combines a 16-bit RISC core with a mixed-signal peripheral set, allowing sensor acquisition, control-loop monitoring, and serial communication in one device. A microcontroller is the central programmable component of an embedded system. The MSP430F1222 belongs to the MSP430 family of mixed-signal microcontrollers, combining a low-power RISC core with analog and digital peripherals. Its 125 ns instruction cycle supports deterministic control timing, while its low-power operating modes are useful in battery-powered industrial instrumentation, portable measurement equipment, and embedded sensing systems. The principal device resources include 4 KB of Flash for program storage, 256 B of SRAM for working data, an 8 MHz maximum clock rating, a 10-bit ADC, one USART, SPI, and timer functions. The 28-pin TSSOP package provides a compact surface-mount footprint for applications requiring mixed-signal measurement without a larger package. The industrial-grade ordering option is identified by the IPW suffix in the product listing. The mixed-signal feature set makes the MSP430F1222IPW useful for applications that combine analog measurement with digital control. The ADC can be used for potentiometer, resistive-sensor, and process-monitoring inputs, while the USART and SPI interfaces provide paths to sensors, displays, transceivers, and data-logging equipment. The timer resources support periodic sampling, timing, and control functions within a low-power embedded platform. Typical applications include industrial process monitors, portable environmental sensors, battery-operated test instruments, digital power controllers, and low-power embedded nodes. The 4 KB Flash limit makes firmware sizing and code efficiency important, while 256 B of SRAM requires careful buffering for data acquisition and communications. When designing a board around the MSP430F1222IPW, follow the manufacturer pin-description and recommended application information for power, clock, reset, analog-input, and serial-interface routing. Place decoupling capacitors close to the supply pins and provide a stable reference and analog-input layout. Validate the ADC source impedance, acquisition timing, and firmware scaling before relying on measurements near the resolution limit. This product page combines the manufacturer specifications, ordering information, pin and package constraints, interface details, and replacement guidance needed to evaluate the MSP430F1222IPW before committing it to an embedded design.

RFQ संपर्क
MSP430F122IDW - 8MHz 16-Bit MCU, 4KB Flash | Texas Instruments
MSP430F122IDW

MSP430F122IDW - 8MHz 16-Bit MCU, 4KB Flash | Texas Instruments

Texas Instruments MSP430F122IDW is an ultralow-power mixed-signal microcontroller with an 8 MHz 16-bit RISC CPU, 4 KB Flash memory, 256 bytes SRAM, and 22 I/O pins in a 28-pin SOIC (DW) package. It integrates a 16-bit timer, analog comparator, SPI interface, and UART, making it suitable for compact embedded measurement and control systems. An ultralow-power mixed-signal microcontroller combines a low-power digital processor with analog and communication peripherals on one device. The MSP430 family uses a 16-bit RISC architecture with 16-bit registers and a 125 ns instruction cycle. Its five low-power modes are designed to extend operating time in portable measurement systems where the duty cycle alternates between active sensing and low-current standby or off periods. The MSP430F122IDW provides 4 KB of Flash for program storage and 256 bytes of SRAM for working data. Its integrated timer supports periodic timing and event handling, while the analog comparator provides a basic threshold and signal-conditioning function for sensor-oriented designs. SPI and UART peripherals enable serial connection to sensors, transceivers, data loggers, or host equipment without requiring separate interface devices. The CPU can operate at up to 8 MHz and includes five power-saving modes. Standby wake-up can occur in less than 1 microsecond, which helps limit the response delay in duty-cycled systems. Off Mode with RAM retention is specified at 0.1 microampere, providing a low-current state for applications that must preserve volatile operating data between measurement intervals. Typical applications include battery-powered sensors, portable data loggers, industrial measurement instruments, digital thermometers, simple UART or SPI monitoring nodes, and compact control products that require mixed-signal capability without a separate comparator or communications IC. The 22 available I/O pins also allow the device to interface with buttons, displays, indicators, transducers, and external sensors. Designers should preserve the MSP430F122IDW package footprint and pin assignments when comparing it with alternatives, because MCU compatibility depends on more than CPU speed. Validate the power-supply limits, clock configuration, memory requirements, peripheral assignments, and active-state current against the manufacturer datasheet. Request a current quotation when lead time, stock, and project-specific sourcing quantities are required. This product page combines the manufacturer's device information with practical guidance for low-power sensing, peripheral integration, package selection, and migration decisions. It also distinguishes verified drop-in options from parts that are merely similar in architecture, helping engineers avoid an unsafe substitution based only on clock rate, memory size, or package family.

RFQ संपर्क
MSP430F122IPW - 16-Bit 8MHz Mixed-Signal MCU | Texas Instruments
MSP430F122IPW

MSP430F122IPW - 16-Bit 8MHz Mixed-Signal MCU | Texas Instruments

Texas Instruments MSP430F122IPW is an ultra-low-power 16-bit mixed-signal microcontroller rated for an 8 MHz clock, with 4 KB of Flash memory, 256 bytes of SRAM, 22 I/O pins, and integrated timer, analog comparator, SPI, and UART functions in a 28-pin TSSOP package. The MSP430F12x family combines a RISC architecture with low-power operating modes for compact embedded control systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The MSP430 belongs to the mixed-signal microcontroller category, combining digital control with an analog comparator and communication peripherals. Its architecture is designed for battery-powered and energy-conscious instrumentation, where low-power states and fast wake-up behavior can reduce average energy consumption. The MSP430F122 provides a 16-bit RISC core with a maximum 8 MHz clock, 4 KB Flash for program storage, and 256 bytes of SRAM for working data. Its integrated peripherals include a 16-bit timer, versatile analog comparator, SPI interface, and UART. Twenty-two I/O pins provide connections for sensors, switches, displays, actuators, and serial communications. The available verified product information identifies the MSP430F12x series as an ultra-low-power mixed-signal MCU with built-in communication capability. The MSP430 architecture executes compact instructions and provides multiple low-power operating modes. This makes it useful in embedded designs that spend most of their time monitoring inputs rather than continuously calculating. Its mixed-signal resources can reduce external component count when the design needs threshold detection, timing, or simple serial connectivity. The manufacturer product page specifically identifies a timer, comparator, SPI, and UART for the MSP430F122 device. Typical applications include low-power sensor nodes, industrial control modules, battery-powered instruments, data acquisition systems, and compact embedded products with local serial communication. The 28-pin TSSOP package is also suitable for prototypes and moderate-density control boards where a through-hole-style lead spacing simplifies assembly and inspection. Designers should verify the complete pinout, clock configuration, reset requirements, and operating limits against the manufacturer datasheet before layout. The exact supply-voltage range, current consumption by mode, temperature range, and detailed pin assignments were not present in the supplied verified data and therefore require confirmation. This page distinguishes documented facts from parameters that still need datasheet verification.

RFQ संपर्क
MSP430F1232CY - 8MHz 16-Bit MCU with 8KB Flash | Texas Instruments
MSP430F1232CY

MSP430F1232CY - 8MHz 16-Bit MCU with 8KB Flash | Texas Instruments

The Texas Instruments MSP430F1232CY is an 8 MHz, 16-bit RISC mixed-signal microcontroller with 8 KB of Flash memory, 256 bytes of SRAM, a 10-bit ADC, a 16-bit timer, UART, and SPI in a bare-die package. It is designed for compact embedded systems that require measurement and serial communication without the overhead of a larger general-purpose microcontroller. An ultra-low-power mixed-signal microcontroller combines a processor, analog conversion functions, timers, digital I/O, and communication peripherals in one device. The MSP430 architecture belongs to the microcontroller hierarchy and combines a 16-bit RISC core, on-chip nonvolatile memory, RAM, and mixed-signal peripherals. This integration allows a product to measure an analog input, process it locally, and communicate the result through UART or SPI without requiring several separate integrated circuits. The MSP430F1232CY operates at up to 8 MHz and provides 8 KB of Flash plus 256 bytes of SRAM. Its mixed-signal resources include a built-in 10-bit analog-to-digital converter with an integrated reference and a data transfer controller, alongside a 16-bit timer. The x12x2 family also supports asynchronous UART and synchronous SPI communication, making the device appropriate for sensor interfaces, compact instruments, industrial controls, and battery-powered embedded products. Power efficiency is central to the MSP430 architecture. The manufacturer describes a low supply range of 1.8 V to 3.6 V, active current of 200 µA at 1 MHz and 2.2 V, standby current of 0.7 µA, and off-mode RAM-retention current of 0.1 µA. Five power-saving modes allow the processor to remain responsive while limiting consumption during inactive periods. Wake-up from standby occurs in less than 6 µs, supporting duty-cycled measurement and control systems. Typical applications include low-power sensor nodes, portable measurement instruments, simple data loggers, industrial condition-monitoring equipment, and compact control panels. The ADC supports direct acquisition of analog signals, while UART or SPI provides connectivity to sensors, displays, memory, or a host controller. The 256-byte SRAM places a clear limit on buffering, so applications should use the Flash program memory and external storage intelligently. Because MSP430F1232CY is offered as die-sale product, board designers must address bare-die handling, die attach, interconnect, inspection, and board-layout requirements before production. A bare die does not provide a conventional lead-frame or molded package, so the physical footprint, pin map, and assembly process cannot be treated like a standard TSSOP or QFP device. This page organizes the manufacturer's core MCU specifications, interface and memory details, purchasing path, and practical design considerations. It also distinguishes the die-sale MSP430F1232CY from packaged MSP430F1232 variants, helping engineers determine whether the part suits their assembly process before committing a board design to it.

RFQ संपर्क
MSP430F123IDW - 8MHz 16-Bit Ultra-Low-Power MCU | Texas Instruments
MSP430F123IDW

MSP430F123IDW - 8MHz 16-Bit Ultra-Low-Power MCU | Texas Instruments

The Texas Instruments MSP430F123IDW is an ultra-low-power 16-bit RISC mixed-signal microcontroller operating at up to 8 MHz, with 8 KB of Flash memory, 256 bytes of SRAM, and a 28-pin SOIC (DW) package. Its integrated resources include a timer, comparator, SPI, and UART, making it suitable for compact embedded measurement and control systems. A mixed-signal microcontroller combines a digital processor with analog and communication peripherals on one integrated circuit. The MSP430 architecture belongs to the broader microcontroller hierarchy and uses a 16-bit RISC CPU, 16-bit registers, and constant generators to support compact, energy-conscious firmware. Its five low-power modes are designed to extend operating time in battery-powered instruments where the processor can spend substantial time waiting for measurements or external events. The headline resources are an 8 MHz maximum clock, 8 KB of Flash program memory, and 256 bytes of SRAM. The peripheral combination supports event timing through the timer, threshold-based signal evaluation through the comparator, and serial communication through SPI and UART. The industrial ordering option supports operation from -40°C to +85°C, while the specified supply range is 1.8 V to 3.6 V. Twenty-two I/O ports provide connections for sensors, controls, indicators, and external interface devices. The MSP430F123IDW is organized around the MSP430 CPU16 core, with a 16-bit RISC instruction set and 16-bit registers. The processor works with the on-chip Flash and SRAM rather than requiring external program or working memory in typical designs. Its architecture is intended to balance processing throughput with low standby and shutdown demand, an important consideration when the device spends long intervals between sensor samples or operator interactions. Typical implementations include portable environmental monitors, industrial sensor nodes, compact data loggers, battery-powered diagnostic instruments, digital thermometers, and low-power control panels. The SPI interface can connect to external sensors or storage, while the UART supports a host computer or service connection. The comparator is useful for monitoring a signal against a reference without requiring every decision to be handled exclusively in software. When laying out a board, preserve the MSP430F123IDW power, ground, decoupling, and programming connections exactly as specified by the manufacturer. Avoid placing noisy switching circuits beside sensitive analog inputs, provide local supply bypassing, and route clock and serial signals away from high-current switching paths. Confirm unused-port states in firmware and account for the limited 256-byte SRAM when organizing buffers and call stacks. This product record combines the exact ordering information, core specifications, package details, and engineering-use guidance needed to evaluate the MSP430F123IDW. It also distinguishes verified drop-in replacements from merely similar devices, helping designers avoid substitutions that change the footprint, peripheral set, memory capacity, or software support.

RFQ संपर्क
MSP430F123IPW - 8MHz 16-Bit MCU | Texas Instruments
MSP430F123IPW

MSP430F123IPW - 8MHz 16-Bit MCU | Texas Instruments

The Texas Instruments MSP430F123IPW is an ultralow-power, mixed-signal 16-bit RISC microcontroller with an 8 MHz maximum clock, 8 KB of Flash memory, and 256 bytes of SRAM in a 28-pin TSSOP package. It operates from 1.8 V to 3.6 V and combines a 16-bit CPU, timer, comparator, SPI interface, and USART in a compact device designed for portable measurement and embedded-control applications. An ultralow-power microcontroller is an integrated semiconductor that prioritizes low active and standby current while retaining deterministic digital processing and mixed-signal sensing capabilities. The MSP430 belongs to the microcontroller hierarchy of embedded processors, combining a RISC CPU, nonvolatile program memory, volatile data memory, timers, communication interfaces, and low-power control in one package. Its architecture is aimed at battery-powered instruments, sensors, industrial controls, and portable measurement systems. Five low-power operating modes allow the MSP430F123IPW to reduce activity when continuous processing is unnecessary. According to the manufacturer product information, active-mode current is approximately 200 µA at 1 MHz and 2.2 V, standby current is 0.7 µA, and off-mode current with RAM retention is 0.1 µA. Wake-up from standby takes less than 6 µs, allowing the device to preserve responsiveness while reducing average system energy consumption. The CPU architecture uses a 16-bit RISC processor with 16-bit registers and a constant-memory instruction set. Program storage consists of 8 KB of Flash, while 256 bytes of SRAM provide working data space. The mixed-signal resources include a comparator for thresholding or simple analog-interface functions, and the communication peripherals include USART and SPI interfaces for connecting sensors, transceivers, displays, and external data acquisition components. Typical uses include portable environmental monitors, industrial sensor nodes, battery-powered data loggers, smart measurement instruments, and compact control boards. The 1.8 V to 3.6 V supply range supports low-voltage embedded systems, while the 28-pin TSSOP package permits conventional surface-mount assembly. The USART supports serial links to host computers or configuration equipment, and SPI can provide a faster interface to external sensors, flash memory, or converters. Designers should account for MCU operating current, peripheral load, startup behavior, and the time required to leave standby. Decoupling capacitors should be placed close to the supply pins, and unused inputs should be connected to defined levels. Firmware should configure the unused peripherals and pins before entering a low-power state, then use the documented wake-up mechanism to restore the required clock and peripheral conditions. This product page combines the manufacturer device characteristics, package information, compatible MSP430 candidates, comparison parameters, and practical integration guidance. It is intended to accelerate part evaluation while preserving separate verification against the Texas Instruments MSP430F123IPW datasheet and the latest part-ordering information.

RFQ संपर्क
MSP430F133IPAG - 16-Bit 8MHz Ultra-Low-Power MCU | Texas Instruments
MSP430F133IPAG

MSP430F133IPAG - 16-Bit 8MHz Ultra-Low-Power MCU | Texas Instruments

The Texas Instruments MSP430F133IPAG is a 16-bit ultra-low-power mixed-signal microcontroller operating at up to 8 MHz, with 8 KB of Flash memory and 256 bytes of SRAM. It integrates a 12-bit ADC, a comparator, SPI and UART interfaces, and 22 I/O ports in a 64-pin TQFP (PAG) package rated for the -40 °C to +85 °C industrial temperature range. An ultra-low-power microcontroller is an integrated circuit designed to execute embedded-control tasks while minimizing energy consumption between measurement and processing events. The MSP430 architecture belongs to the embedded microcontroller and mixed-signal IC hierarchy. Its 16-bit RISC core, 16-bit registers, constant generators, and five low-power operating modes make it suitable for instruments, meters, sensors, and portable measurement systems that spend much of their service life in standby or RAM-retention states. The device's principal features include an 8 MHz maximum clock, 8 KB of Flash program memory, 256 bytes of SRAM, a 12-bit ADC, a comparator, and serial interfaces for SPI and UART. A 1.8 V to 3.6 V supply-voltage range supports low-voltage system designs, while the mixed-signal peripherals allow analog sensing and digital control to share one device. Wake-up from standby occurs in less than 1 µs, reducing the latency penalty associated with duty-cycled operation. The MSP430 CPU16 core uses a compact 16-bit RISC architecture with 16-bit registers and constant generators. Its reduced instruction set supports efficient control-code execution, while the hardware ADC and comparator reduce the need for separate analog front-end ICs. Active-mode current is characterized at 1 MHz and 2.2 V, and the device supports multiple power-saving modes for embedded systems operating from restricted energy budgets. Typical applications include low-cost data loggers, industrial panel meters, battery-powered monitors, portable test equipment, environmental sensors, and compact control modules. The TQFP-64 package provides enough I/O and analog resources for designs that require multiple inputs, external memory interfaces, or several serial peripherals while avoiding the size constraints of smaller packages. When laying out the board, treat analog and digital return paths as separate networks until they meet at the device ground reference. Place input and bypass capacitors close to their pins, follow the datasheet grounding topology, and confirm the operating voltage before programming external peripherals. Use the manufacturer datasheet pin table and recommended application schematic for final net assignments and decoupling values. This page combines device specifications, package details, application guidance, comparison parameters, and same-family replacement options to support component selection and board-level implementation. It also organizes practical low-power and mixed-signal design considerations that are not presented together in a standard distributor listing.

RFQ संपर्क
MSP430F133IPM - 8MHz Mixed-Signal MCU | Texas Instruments
MSP430F133IPM

MSP430F133IPM - 8MHz Mixed-Signal MCU | Texas Instruments

The Texas Instruments MSP430F133IPM is an 8 MHz mixed-signal microcontroller with 8 KB of Flash memory, 256 B of SRAM, a 12-bit ADC, a comparator, and SPI and UART interfaces, housed in a 64-pin LQFP (PM) package. The device combines a 16-bit RISC CPU with embedded mixed-signal resources in a package intended for industrial embedded control. A mixed-signal microcontroller integrates digital processing and analog measurement or comparison functions on one device. In the MSP430 architecture, this MCU belongs to the broader embedded-controller hierarchy: MCU, embedded processor, microcontroller, and semiconductor. The MSP430F133IPM is suited to designs that need local control, serial communications, and analog signal conditioning without requiring a separate discrete ADC or comparator. Key device features include an 8 MHz operating speed, 8 KB of program Flash, and 256 B of SRAM. Its 12-bit ADC provides the primary analog conversion path, while the on-chip comparator supports thresholding, signal comparison, and basic mixed-signal control functions. SPI and UART interfaces expand the available options for connecting sensors, external converters, displays, or other embedded peripherals. The 16-bit RISC processing core provides 16-bit registers and constant generators that support efficient control-oriented instruction execution, as described by the available manufacturer and comparison data. The 256 B SRAM is modest compared with current high-density MCUs, so firmware must account for stack depth, buffering, and working-memory limits. The 8 KB Flash capacity is best suited to compact control firmware rather than large graphical interfaces or extensive protocol stacks. Typical uses include industrial sensor acquisition, low-power instrumentation, compact control modules, data loggers, and embedded products that measure an analog input and communicate results through SPI or UART. The LQFP-64 package provides more I/O than small-outline microcontroller packages and can simplify board routing in designs that already use this footprint. Designers should confirm the exact pin assignments and peripheral multiplexing for the LQFP-64 implementation before schematic capture. Component values such as input-voltage limits, ADC accuracy, converter timing, and detailed electrical limits are not stated in the supplied verified snippets and must be checked against the current manufacturer datasheet before production release. This product record combines verified manufacturer specifications, distributor references, source-qualified alternatives, comparison parameters, and application guidance. It also highlights which electrical details still require datasheet confirmation, helping engineers distinguish verified purchasing information from parameters that should not be inferred from an orderable part listing.

RFQ संपर्क
MSP430F133IPMR - 8MHz Mixed-Signal MCU | Texas Instruments (Tape & Reel)
MSP430F133IPMR

MSP430F133IPMR - 8MHz Mixed-Signal MCU | Texas Instruments (Tape & Reel)

The Texas Instruments MSP430F133IPMR is an 8 MHz mixed-signal microcontroller with 8 KB of Flash memory, 256 B of SRAM, a 12-bit ADC, a comparator, and SPI and UART interfaces, housed in a 64-pin LQFP (PM) package. The device combines a 16-bit RISC CPU with embedded mixed-signal resources in a package intended for industrial embedded control. A mixed-signal microcontroller integrates digital processing and analog measurement or comparison functions on one device. In the MSP430 architecture, this MCU belongs to the broader embedded-controller hierarchy: MCU, embedded processor, microcontroller, and semiconductor. The MSP430F133IPMR is suited to designs that need local control, serial communications, and analog signal conditioning without requiring a separate discrete ADC or comparator. Key device features include an 8 MHz operating speed, 8 KB of program Flash, and 256 B of SRAM. Its 12-bit ADC provides the primary analog conversion path, while the on-chip comparator supports thresholding, signal comparison, and basic mixed-signal control functions. SPI and UART interfaces expand the available options for connecting sensors, external converters, displays, or other embedded peripherals. The 16-bit RISC processing core provides 16-bit registers and constant generators that support efficient control-oriented instruction execution, as described by the available manufacturer and comparison data. The 256 B SRAM is modest compared with current high-density MCUs, so firmware must account for stack depth, buffering, and working-memory limits. The 8 KB Flash capacity is best suited to compact control firmware rather than large graphical interfaces or extensive protocol stacks. Typical uses include industrial sensor acquisition, low-power instrumentation, compact control modules, data loggers, and embedded products that measure an analog input and communicate results through SPI or UART. The LQFP-64 package provides more I/O than small-outline microcontroller packages and can simplify board routing in designs that already use this footprint. Designers should confirm the exact pin assignments and peripheral multiplexing for the LQFP-64 implementation before schematic capture. Component values such as input-voltage limits, ADC accuracy, converter timing, and detailed electrical limits are not stated in the supplied verified snippets and must be checked against the current manufacturer datasheet before production release. This product record combines verified manufacturer specifications, distributor references, source-qualified alternatives, comparison parameters, and application guidance. It also highlights which electrical details still require datasheet confirmation, helping engineers distinguish verified purchasing information from parameters that should not be inferred from an orderable part listing.

RFQ संपर्क