उत्पाद (44,000+)

XC6SLX16-2FT256I - Spartan-6 LX FPGA, 14K LCs, 256-BGA | AMD
XC6SLX16-2FT256I

XC6SLX16-2FT256I - Spartan-6 LX FPGA, 14K LCs, 256-BGA | AMD

The AMD (formerly Xilinx) XC6SLX16-2FT256I is a Spartan-6 LX family Field Programmable Gate Array (FPGA) with 14,579 logic cells, 589,824 bits of block RAM, and 186 user I/O, housed in a 256-ball Fine-Pitch Thin Ball Grid Array (FTBGA-256) package with industrial-grade -40C to +100C temperature rating and -2 speed grade performance. An FPGA (Field Programmable Gate Array) is a semiconductor integrated circuit composed of configurable logic blocks (CLBs), programmable interconnect, and dedicated silicon IP such as block RAM, DSP slices, and clock management tiles (CMTs). FPGAs occupy a position between general-purpose microcontrollers (software-defined behavior, sequential execution) and application-specific integrated circuits (ASICs, fixed function, highest performance per watt). The Spartan-6 family specifically targets cost-sensitive, high-volume applications where ASIC NRE costs are prohibitive but microcontroller performance is insufficient. Key features of the XC6SLX16-2FT256I include 2,278 Kbits total block RAM, 32 DSP48A1 slices for fixed-point and signal-processing arithmetic, four clock management tiles (CMTs) with digital clock managers (DCMs) and phase-locked loops (PLLs), and integrated SelectIO technology supporting single-ended and differential I/O standards up to 1080 Mbps. The device is fabricated on a 45 nm CMOS process and operates from a 1.2 V core supply with separate I/O bank voltages from 1.2 V to 3.3 V. Architecturally, the Spartan-6 LX family uses a 6-input LUT-based logic fabric with dedicated carry chains, distributed SRL16/SRL32 shift-register primitives, and a 16-bit block RAM/FIFO controller per BRAM tile. The 256-ball FTBGA package provides 186 effective user I/O after accounting for power, ground, configuration, and dedicated JTAG pins. Typical applications include industrial motor control, video processing pipelines, low-cost software-defined radio, LED video wall controllers, and embedded vision pre-processing. The 256-BGA package suits designs requiring dense I/O and moderate thermal dissipation. When designing with this device, ensure proper decoupling with 100 nF ceramic capacitors at every supply pin and a 4.7-10 uF bulk capacitor near the core rail. Configuration can be sourced from SPI flash, JTAG, or BPI parallel memory; the dedicated DONE and INIT_B pins must be monitored for proper startup sequencing. This page synthesizes distributor pricing, verified drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ संपर्क
XC6SLX16-2FTG256C - Spartan-6 LX FPGA, 14K Cells, 256-BGA
XC6SLX16-2FTG256C

XC6SLX16-2FTG256C - Spartan-6 LX FPGA, 14K Cells, 256-BGA

The AMD (Xilinx) XC6SLX16-2FTG256C is a member of the Spartan-6 LX family of field-programmable gate arrays (FPGAs) providing 14,579 logic cells (approximately 1,139 CLBs), 589,824 bits of block RAM, and 186 maximum user I/Os in a 256-ball fine-pitch thin BGA (FTG256) package. Built on a 45 nm CMOS process, the LX variant targets low-cost, high-volume applications with an emphasis on logic density and embedded memory, while delivering typical core performance up to 667 MHz. FPGAs are programmable logic devices that allow hardware designers to implement arbitrary digital circuits, ranging from glue logic and bus bridges to full processor subsystems and DSP pipelines. The Spartan-6 LX series specifically targets cost-sensitive, high-volume designs such as consumer electronics, industrial control, automotive infotainment, and communications infrastructure. Within the broader taxonomy, FPGAs sit alongside CPLDs (less-dense, non-volatile), ASICs (fixed-function, high-volume), and microcontrollers (software-programmed sequential); FPGAs uniquely offer hardware-level parallelism with reconfigurable logic. Key features of the XC6SLX16 include the 256-ball FTG256 package at 1.0 mm ball pitch, a 17×17 mm body, lead-free/RoHS-compliant construction, and an industrial-class (-2) speed grade. The device integrates dual 10/100/1000 Ethernet MACs, dedicated DSP slices (32 of them, totaling 8.18 GMAC/s when fully packed), and 32 BRAM blocks supporting 18 Kb each. Configuration is supported through JTAG (IEEE 1149.1/1532), SPI (x1, x2, x4), and BPI (x8, x16) modes, while clock management is handled by up to 4 clock management tiles (CMTs) containing mixed-mode clock managers and PLLs. Typical applications include high-volume bridging between legacy video or memory interfaces and modern SoCs, motor control loops, low-cost industrial Ethernet endpoints, video processing pipelines, and embedded soft-processor cores such as MicroBlaze or PicoBlaze. Designers frequently pair the Spartan-6 LX with companion DDR memory controllers and high-speed serial transceivers (where required by the chosen package). A critical design consideration with the XC6SLX16-2FTG256C is its lifecycle status: the Spartan-6 family is generally considered NRND (Not Recommended for New Designs) per AMD/Xilinx's product longevity notice. Engineers building production hardware should evaluate Artix-7 or Spartan-7 successors for new projects while keeping this part viable for maintenance of legacy designs. Power decoupling, multi-bank I/O voltage referencing, and bitstream encryption (AES-256) also require careful PCB and firmware planning. This page synthesizes authorized distributor pricing, same-package drop-in alternatives, and practical hardware-design guidance that goes beyond the datasheet's typical-application notes — including lifecycle awareness for engineers managing long-life industrial installations.

USD $16.41 स्टॉक में
XC6SLX16-2FTG256I - 14,579-Cell Spartan-6 LX FPGA | AMD
XC6SLX16-2FTG256I

XC6SLX16-2FTG256I - 14,579-Cell Spartan-6 LX FPGA | AMD

The AMD XC6SLX16-2FTG256I is a Spartan-6 LX field-programmable gate array with 14,579 configurable logic cells, 1,139 CLBs, 186 I/Os, and a stated internal frequency of 667 MHz, packaged in a 256-pin lead-free FTGBGA. The -2 speed grade and I temperature designation identify this device as an industrial-oriented Spartan-6 LX option for cost-sensitive embedded systems requiring substantial programmable logic, dedicated block RAM, DSP resources, and clock-management capability. A field-programmable gate array is a semiconductor whose digital logic, memory, and signal-processing blocks are configured after fabrication. In the product hierarchy, an FPGA sits above programmable logic devices and integrates configurable logic, fixed or block memory, DSP processing, clock management, and programmable I/O. This integration allows one package to replace combinations of processors, interface controllers, data converters, and discrete programmable logic while preserving upgradeability through a configuration bitstream. Key resources include 2,278 adaptive logic modules, 186 user I/Os, 14,579 logic cells, and 1,139 CLBs. The source data also identifies 375 MHz as another stated frequency and gives a core-voltage range of 1.14 V to 1.26 V. The FTG256 package uses a 17 mm by 17 mm body with a 1 mm ball pitch, supporting dense PCB integration without requiring a large leaded package. The Spartan-6 LX architecture combines programmable logic with block RAM, DSP slices, digital clock managers, and PLLs. Those resources allow parallel data-path designs, protocol bridging, control-plane logic, and fixed-point signal processing to share one FPGA. A 667 MHz stated internal frequency supports demanding clock domains, but achievable system performance remains dependent on the selected design, timing constraints, memory interface implementation, and I/O standards. Typical uses include industrial control and automation, embedded communications gateways, video and image-processing pipelines, instrumentation, and low-cost data-acquisition systems. In these applications, the 186 I/Os provide connectivity, while the 14,579 logic cells allow control logic and datapaths to be consolidated. The Spartan-6 family is particularly relevant to designs that require FPGA flexibility without moving to a larger or more expensive device family. Designers should use the official Spartan-6 package pinout files for every FTG256 ball assignment and verify the selected bank supplies, configuration pins, clock-capable pins, and I/O standards against the design constraints. PCB layout must also account for the 1 mm pitch, power and ground distribution, configuration-boot behavior, and high-speed routing required by the implemented interfaces. This page consolidates the verified specifications, distributor pricing, same-footprint alternatives, and application-oriented design guidance available for the XC6SLX16-2FTG256I. It also distinguishes documented values from unresolved lifecycle, pin-level, and pricing details so engineers can make a traceable sourcing decision.

RFQ संपर्क
XC6SLX16-3CPG196C - Spartan-6 LX FPGA 14579 Cells 106 I/O | AMD
XC6SLX16-3CPG196C

XC6SLX16-3CPG196C - Spartan-6 LX FPGA 14579 Cells 106 I/O | AMD

The AMD (Xilinx) XC6SLX16-3CPG196C is a Spartan-6 LX family Field Programmable Gate Array delivering 14,579 cells, 1,451 Kbits of block RAM, and 106 user I/O in a 196-ball CSBGA (0.5 mm pitch, 8x8 mm) package. The device operates at the -3 speed grade, the highest performance bin in the Spartan-6 LX series, with a maximum internal clock frequency of 667 MHz and 1.2 V core supply. An FPGA (Field Programmable Gate Array) is a reprogrammable semiconductor that combines configurable logic blocks, programmable interconnect, and dedicated silicon resources such as block RAM, DSP slices, and clock managers. FPGAs sit between general-purpose microcontrollers and fixed-function ASICs in the digital-logic hierarchy: they deliver ASIC-level performance and parallelism while remaining reprogrammable in the field. The Spartan-6 family specifically targets cost-sensitive, high-volume applications where power consumption, density, and price-per-logic-cell are critical. Key features of the XC6SLX16-3CPG196C include 14,579 logic cells, 1,451 Kbits of block RAM (576 Kbits dual-port), 32 DSP48A1 slices, 2 clock management tiles (CMTs), and 2 PCIe hard IP blocks. The 106 available user I/Os support multiple I/O standards including LVCMOS, LVDS, and LVTTL at programmable slew rates and strengths. The CSBGA-196 package (8x8 mm body, 0.5 mm ball pitch) suits compact, high-density PCB layouts. The Spartan-6 LX architecture is built on a 45 nm CMOS process and provides lower static and dynamic power than the prior Spartan-3A generation. The device integrates a hard PCIe endpoint block (1-lane Gen1), hard memory controllers for DDR/DDR2/DDR3/LPDDR, and a high-speed GTP serial transceiver-free design (the LX family omits transceivers, unlike the LXT). The -3 speed grade delivers the highest Fmax in the family. Typical applications include industrial motor and motion control, video surveillance and image processing, low-cost PCIe endpoint cards, consumer display controllers, and embedded DSP systems. The CSBGA-196 footprint is particularly suitable for space-constrained designs such as portable test equipment and 4-layer FR4 carrier boards. The 45 nm process and 1.2 V core reduce thermal dissipation compared to older 90 nm and 65 nm FPGA families. When designing with this device, allocate sufficient decoupling capacitance (typically 100 nF and 4.7 uF combinations) at each supply pin and follow AMD's Spartan-6 PCB Design Guide for controlled-impedance routing. The 0.5 mm pitch CSBGA requires via-in-pad or laser-drilled microvia technology on standard 4-layer boards; ensure your PCB fabrication process supports the pitch before committing to layout.

RFQ संपर्क
XC6SLX16-3CPG196I - Spartan-6 LX FPGA | AMD Embedded
XC6SLX16-3CPG196I

XC6SLX16-3CPG196I - Spartan-6 LX FPGA | AMD Embedded

AMD XC6SLX16-3CPG196I is a Spartan-6 LX field-programmable gate array built on 45 nm technology, providing 106 user I/O, a listed internal frequency of 667 MHz, and a 196-ball TFBGA package. The -3 designation identifies the high-performance Spartan-6 LX speed grade, while the CPG196 package provides a compact 19 x 19 mm surface-mount option with a 0.80 mm ball pitch. A field-programmable gate array is a programmable digital semiconductor that falls within the broader semiconductor and programmable-logic hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA combines configurable logic, memory resources, and programmable I/O in one device. This flexibility allows designers to implement parallel data paths, control logic, protocol interfaces, signal processing, and embedded systems while retaining a hardware platform that can be revised through configuration files. The Spartan-6 LX architecture provides 14,579 logic cells, 106 I/O, and the -3 performance grade identified in the product listing. The 196-ball CSBGA package is lead-free and uses a compact 0.80 mm pitch. These characteristics make the XC6SLX16-3CPG196I useful when board area is constrained but the design still requires programmable logic, moderate I/O density, and dedicated FPGA resources. The 45 nm Spartan-6 generation combines configurable logic with block RAM and DSP resources for control, communications, data acquisition, and embedded-processing designs. At the system level, the 106 available I/O support connections to external memory, transceivers, sensors, converters, and digital peripherals. Designers must complete timing closure for the selected speed grade, configure the device through the appropriate AMD FPGA toolchain, and implement power, decoupling, clocking, and I/O standards appropriate to the target board. Typical uses include industrial automation, motor and motion control, test and measurement, embedded communications, instrument interfaces, and low-to-medium complexity signal-processing systems. The -3 speed grade is the principal reason to select this exact ordering code when maximum Spartan-6 LX performance is preferred over the lower -2 and L1 speed grades. A critical design consideration is that the compact BGA package demands careful PCB layout, especially for power delivery, exposed-pad thermal management, high-speed routing, and ball-grid alignment. Decoupling should be placed directly beside the relevant supply balls, and the design should follow AMD's package, power, and layout guidance before release to fabrication. This page combines the device's exact ordering information, package characteristics, verified drop-in alternatives, application guidance, and design considerations. It also distinguishes true same-footprint options from superficially similar Spartan-6 devices that cannot replace the target without changing temperature grade, speed grade, logic density, or package.

RFQ संपर्क
XC6SLX16-3CSG225C - 14,579-Cell FPGA, 160 I/O | AMD
XC6SLX16-3CSG225C

XC6SLX16-3CSG225C - 14,579-Cell FPGA, 160 I/O | AMD

AMD XC6SLX16-3CSG225C is a Spartan-6 LX field-programmable gate array with 14,579 logic elements, 160 I/O, 576 Kbit of embedded memory, and a 667 MHz internal frequency in a 225-LFBGA, CSPBGA package. The -3 speed grade is the highest-performance grade listed for the Spartan-6 LX family, while the C suffix identifies the commercial-temperature ordering option. A field-programmable gate array, or FPGA, is a programmable digital integrated circuit that belongs to the semiconductor and programmable-logic hierarchy. Unlike a fixed-function logic device, an FPGA contains configurable logic, memory, and I/O resources that engineers program to implement digital control, signal processing, communications, and interface functions. The Spartan-6 LX family combines programmable logic with integrated block RAM and dedicated input/output resources for cost-sensitive embedded designs. The XC6SLX16-3CSG225C provides 14,579 logic elements organized into 2,278 adaptive logic modules, 160 user I/O, and 576 Kbit of embedded memory. Its listed 667 MHz internal frequency supports timing-driven designs requiring deterministic programmable logic. The 45 nm FPGA process provides a mature implementation platform for industrial control, communications, instrumentation, embedded video, and general-purpose prototyping systems. The -3 designation selects the highest performance rating in the compared Spartan-6 LX speed-grade set. The commercial C temperature option is listed from 0°C to 85°C, making the device appropriate for equipment operating within that commercial range. The 225-LFBGA, CSPBGA package also supports compact board layouts, but its fine 0.80 mm pitch requires careful escape routing, clean ground-plane design, and assembly-process control. Typical uses include industrial automation controllers, sensor and measurement interfaces, communications equipment, embedded control systems, and FPGA-based test platforms. The Spartan-6 architecture is especially useful when designs need configurable parallel interfaces, serial transceivers, clocking, block RAM, and deterministic logic in one programmable device rather than a combination of fixed-function ICs. PCB planning should begin with the AMD package pinout file and the Spartan-6 device datasheet. Preserve a continuous ground reference beneath the BGA, route high-speed signals with controlled impedance, provide suitable decoupling at supply pins, and follow the package-specific layout guidance before releasing the board to fabrication. This product page combines the device identity, programming-relevant resource counts, package characteristics, speed-grade differences, practical PCB guidance, and same-package replacement options. It supports faster engineering selection by separating what changes between orderable variants from what remains constant in the Spartan-6 LX design family.

RFQ संपर्क
XC6SLX16-3CSG225I - Spartan-6 14,579-LC FPGA | AMD
XC6SLX16-3CSG225I

XC6SLX16-3CSG225I - Spartan-6 14,579-LC FPGA | AMD

AMD XC6SLX16-3CSG225I is a Spartan-6 LX field-programmable gate array built on 45 nm CMOS, with 14,579 logic cells, 2,278 adaptive logic modules, 1,139 configurable logic blocks, 160 I/O, and a maximum internal clock frequency of 862 MHz. It is packaged in a 225-pin CSBGA on a 13 mm × 13 mm body with a 0.80 mm ball pitch. A field-programmable gate array is a programmable-logic semiconductor in which digital logic functions are configured after fabrication. An FPGA belongs to the broader hierarchy of programmable logic devices, semiconductor integrated circuits, and digital logic components. Spartan-6 devices combine configurable logic, block RAM, programmable I/O, and dedicated processing resources in a single package, allowing compact implementations of control, interface, signal-processing, and communication systems. The -3 speed designation identifies the highest-performance Spartan-6 LX speed grade identified in the manufacturer documentation. This device provides 576 kbit of embedded memory, 24 multipliers, and 160 user I/O. Its 225-LFBGA, CSPBGA package supports dense PCB integration, while the lead-free construction and RoHS-compliant status suit current production requirements. The industrial-order suffix distinguishes this ordering option from the commercial-temperature CSG225C version. Spartan-6 LX architecture is intended for medium-complexity designs where programmable logic offers faster schedule flexibility than a custom ASIC. The 45 nm CMOS process combines configurable logic blocks with dedicated memory and arithmetic resources. A design can use parallel processing paths, serial transceivers, clock-management resources, and programmable I/O blocks without implementing those functions as separate discrete devices. Typical uses include industrial automation, embedded control, video and image processing, communications infrastructure, instrumentation, and consumer equipment requiring a compact logic platform. The 160-I/O count supports interfaces to external memory, converters, transceivers, and display or sensing hardware, while 576 kbit of block RAM enables packet buffering, data acquisition, and local storage. PCB implementation requires careful BGA escape routing, uninterrupted supply and ground distribution, and decoupling close to the power balls. Because the -3 grade provides the highest performance in the Spartan-6 LX family, verify timing closure at the intended clock frequency and use the manufacturer pinout and configuration guidance before releasing the board layout. This product page combines the principal FPGA specifications, package details, ordering-grade differences, and same-footprint alternatives with practical design guidance. It helps engineers distinguish speed-grade, temperature-grade, and package variations before making a production BOM decision.

RFQ संपर्क
XC6SLX16-3CSG324C - 14,579-Cell Spartan-6 LX FPGA | AMD
XC6SLX16-3CSG324C

XC6SLX16-3CSG324C - 14,579-Cell Spartan-6 LX FPGA | AMD

The AMD XC6SLX16-3CSG324C is a Spartan-6 LX field-programmable gate array with 14,579 logic cells, 232 I/O, 589,824 RAM bits, and a 667 MHz internal frequency, packaged in a 324-CSPBGA. The -3 designation identifies the highest-performance Spartan-6 speed grade in the provided source data, while the C suffix denotes the commercial operating-temperature option. A field-programmable gate array, or FPGA, is a programmable digital semiconductor that combines configurable logic, block RAM, programmable I/O, and dedicated processing resources on one device. Within the semiconductor hierarchy, an FPGA belongs to the programmable-logic class and provides a hardware alternative to combining numerous discrete logic devices. It is widely used when design changes, parallel processing, high I/O density, or rapid product customization are more important than the lowest unit cost. The XC6SLX16 offers 14,579 logic cells organized into 1,139 LABs and CLBs, together with 589,824 bits of embedded block RAM. Its 232 user I/O support communication links, control interfaces, memory connections, and mixed-signal system integration. The 667 MHz internal frequency provides a concrete timing reference for clocked digital designs, although achievable system performance depends on the selected tools, constraints, memory interfaces, and I/O standards. This device is built on a 45 nm FPGA process and supports operating supply voltages from 1.14 V to 1.26 V. The 324-CSPBGA package supports dense surface-mount assembly while exposing a substantial pin count for high-bandwidth designs. The commercial-grade part is specified for a 0 °C to 85 °C operating range, making it appropriate for cost-sensitive equipment operating in controlled commercial environments rather than extended industrial temperature conditions. Typical uses include real-time digital signal processing, video encoding and decoding, image processing, image enhancement, industrial automation, programmable control, and high-performance computing accelerators. Its combination of logic, memory, and 232 I/O permits a complete parallel pipeline to be consolidated into one FPGA. Dedicated block RAM can buffer video lines or sample data, while programmable logic can implement filters, protocol converters, and control algorithms. Designers should obtain the AMD Spartan-6 package pinout file before assigning any board-level pins and verify the selected package, voltage requirements, and pinout against the device documentation. The provided search results conflict on package dimensions, so the exact body size and ball-pitch information must be checked in the authoritative package drawing rather than inferred from third-party listings. Commercial-temperature operation should also be confirmed against the enclosure temperature. This product page consolidates the verified distributor specifications, price, source links, package identity, and same-family drop-in options into an engineering-focused reference. It also distinguishes documented facts from unavailable details, helping teams compare sourcing options while avoiding unsupported package, pinout, or timing assumptions.

RFQ संपर्क
XC6SLX16-3CSG324I - 45nm Spartan-6 FPGA | AMD
XC6SLX16-3CSG324I

XC6SLX16-3CSG324I - 45nm Spartan-6 FPGA | AMD

The AMD XC6SLX16-3CSG324I is a Spartan-6 LX field-programmable gate array built on 45 nm technology, with 14,579 logic cells, 589,824 RAM bits, 232 I/Os, and a 1.14 V to 1.26 V supply range in a 324-ball CSBGA package. The -3 speed grade targets maximum Spartan-6 LX performance, while the I suffix denotes the industrial-temperature option. A field-programmable gate array is a semiconductor whose digital logic, interconnect, memory blocks, and input/output behavior are configured after manufacture. Within the programmable-logic hierarchy, an FPGA sits above fixed-function logic and combines configurable logic elements with block RAM, digital clock managers, and programmable I/O. This architecture allows one board design to support multiple protocols or algorithms through a configuration bitstream rather than a redesign of a custom ASIC. The device provides 14,579 logic cells and 589,824 bits of RAM, creating a compact platform for parallel digital signal processing, control logic, protocol bridging, and embedded data acquisition. Its 232 I/Os provide substantial connectivity for parallel buses, clocks, controls, and high-speed interfaces. The listed internal frequency is 667 MHz, while published summaries also identify a 400 MHz operating or processing frequency for this device. External memory interfaces and high-speed transceiver capabilities should therefore be checked against the specific design requirements. The CSG324 package uses a 0.80 mm ball pitch and measures approximately 19 mm by 19 mm. Its 324-ball construction supports dense routing to FPGA logic and memory resources, but PCB layout must follow AMD package and pinout documentation. Spartan-6 LX devices in the same supported package are pinout compatible, making speed- and temperature-grade alternatives practical when timing or commercial-temperature requirements differ. Typical uses include industrial automation, test and measurement, automotive infotainment, consumer bridging, communications gateways, and embedded control. The 14,579-cell device is especially appropriate for designs requiring deterministic parallel logic and moderate on-chip RAM without moving to a larger FPGA family. A design must still close timing for the selected speed grade and verify pin-compatible power, configuration, and interface requirements. Careful power planning is essential because both dynamic and static consumption depend on the selected configuration, clocking, I/O activity, and environmental conditions. Place decoupling capacitors at the relevant power pins, follow the AMD Spartan-6 package pinout files during routing, and validate the final configuration and bitstream against the production PCB. This page combines package, logic-resource, I/O, memory, and voltage information with speed-grade alternatives, engineering design notes, and application guidance. It provides a practical basis for determining whether the XC6SLX16-3CSG324I fits a design before detailed timing closure and board validation begin.

RFQ संपर्क
XC6SLX16-3FT256C - 14,579 Logic Cell Spartan-6 FPGA | AMD
XC6SLX16-3FT256C

XC6SLX16-3FT256C - 14,579 Logic Cell Spartan-6 FPGA | AMD

AMD XC6SLX16-3FT256C is a Spartan-6 LX field-programmable gate array with 14,579 logic elements, 1,139 configurable logic blocks, 589,824 bits of block RAM, and a maximum clock frequency of 667 MHz, packaged in a 256-LBGA. The device combines programmable logic, embedded memory, programmable I/O, and dedicated FPGA resources in a single 45 nm CMOS device for embedded and cost-sensitive digital systems. A field-programmable gate array is a semiconductor whose digital logic, interconnections, and I/O behavior are configured after manufacture. The Spartan-6 LX family belongs to the broader FPGA hierarchy and provides parallel programmable logic, block RAM, digital signal processing resources, and clock-management functions. This makes the device useful where a fixed application-specific integrated circuit would be inflexible or uneconomic to develop. The XC6SLX16-3FT256C provides 14,579 logic elements arranged across 1,139 CLBs, with 589,824 total RAM bits supporting data buffering, packet handling, and general-purpose embedded storage. Its reported 667 MHz maximum clock frequency provides useful timing margin for control logic, interface bridges, instrumentation, and embedded processors. The -3 speed designation identifies its performance grade within the Spartan-6 LX family. Built on 45 nm CMOS technology, the device supports a 1.2 V core supply as identified in the verified product records. Its 256-LBGA package uses a 1 mm pitch and measures approximately 17 mm by 17 mm. The supplied comparison data also identifies 186 I/O resources, allowing the device to interface multiple buses, peripherals, and external control signals while preserving a compact surface-mount footprint. Typical uses include industrial automation, communications equipment, embedded control, test and measurement, signal processing, and compact network interfaces. The combination of programmable logic, block RAM, and 186 I/O permits designers to consolidate parallel control, data buffering, and protocol handling in one device. A complete design still requires suitable clocking, configuration storage, decoupling, and board-level signal-integrity implementation. When planning a board, verify every BGA-256 land pattern against the AMD Spartan-6 package pinout files and the selected device’s official package drawing. The -3 speed grade and commercial C suffix must also be treated as part of the exact ordering code rather than assumed interchangeable with other Spartan-6 grades or temperature options. This page consolidates the verified distributor specifications, 256-LBGA sourcing information, same-family replacement candidates, pricing evidence, and practical FPGA design considerations into one engineering-focused reference. It distinguishes directly documented facts from package details or operating parameters that still require confirmation from the complete AMD device documentation.

RFQ संपर्क
XC6SLX16-3FT256I - Spartan-6 LX FPGA, 14579 Cells, 186 I/O | AMD
XC6SLX16-3FT256I

XC6SLX16-3FT256I - Spartan-6 LX FPGA, 14579 Cells, 186 I/O | AMD

The AMD/Xilinx XC6SLX16-3FT256I is a Spartan-6 LX field programmable gate array (FPGA) delivering 14,579 logic cells, 1,139 configurable logic blocks (CLBs) and 186 user I/O, with a maximum internal clock frequency of 667 MHz on a 1.2 V core supply, packaged in a 256-ball FTBGA (FT256) surface-mount package measuring 17 x 17 mm with 1.0 mm ball pitch. An FPGA is a reconfigurable digital integrated circuit whose logic, memory and I/O are defined by a bitstream loaded at power-up. A logic cell contains a lookup table plus flip-flops and routing resources, and thousands of such cells are interconnected by a programmable switch matrix. The Spartan-6 LX family is the logic-optimized member of the Spartan-6 series: it targets designs dominated by wide datapaths, control logic, protocol bridges and video/interface consolidation rather than maximum DSP density. In the device hierarchy, this part sits as a programmable logic device within the FPGA & CPLD family of integrated circuits. Key characteristics of the XC6SLX16-3FT256I include the -3 speed grade, which is the highest-performance Spartan-6 LX grade available, and a 45 nm CMOS process node that keeps both static power and dynamic power manageable in cost-sensitive embedded systems. The device provides 186 user I/O in a compact 256-ball grid, which is a high I/O-to-logic ratio for a device of this size. Temperature handling is specified as 0 C to +85 C (32 F to 185 F) with industrial-grade parts marking, and the FT256 package is offered in a lead-free configuration. Technically, the device combines LUT-based six-input logic architecture with dedicated block RAM for data buffering and DSP-oriented arithmetic, plus SelectIO resources that support high-speed memory interfaces and common I/O standards through selectable I/O drivers. Because the device is a -3 grade part, timing closure is the easiest of the Spartan-6 LX options, giving the highest achievable system clock and the greatest margin on demanding multi-clock domains. Configuration is handled through the standard Xilinx JTAG and configuration interface scheme, supporting both persistent and reconfiguration-oriented design flows. Typical applications include industrial control and PLC I/O expansion, industrial Ethernet and fieldbus bridging, video and image datapath consolidation, USB and multi-protocol interface hubs, motor and motion control sequencers, and compact embedded control platforms for aerospace, telecommunications and consumer networking equipment. When designing with this device, plan the power budget and thermal design around the 1.2 V core supply and the I/O supply rails, and confirm the pinout against the AMD Spartan-6 package pinout files for the FT256 package before layout. Because the FT256 package is a dense 1.0 mm-pitch BGA, a fine-pitch assembly and adequate solder mask and paste control are required to avoid bridging defects. This page consolidates distributor pricing, verified drop-in replacement options, and packaging and thermal design notes for the XC6SLX16-3FT256I that are not consolidated in any single manufacturer document, so engineers can evaluate the device and its alternates before committing a PCB layout.

RFQ संपर्क
XC6SLX16-3FTG256C - Spartan-6 LX FPGA, 14k LCs, 256-FTBGA | AMD
XC6SLX16-3FTG256C

XC6SLX16-3FTG256C - Spartan-6 LX FPGA, 14k LCs, 256-FTBGA | AMD

The AMD (formerly Xilinx) XC6SLX16-3FTG256C is a Spartan-6 LX field-programmable gate array (FPGA) providing 14,579 logic cells, 186 maximum user I/Os, and 256 Kbits of distributed RAM in a 256-ball fine-pitch thin-ball grid array (FTBGA-256, 17 x 17 mm, 1.0 mm pitch). It uses 45 nm CMOS process technology and operates from a 1.2 V core supply with multi-voltage I/O support. An FPGA (Field-Programmable Gate Array) is a programmable logic device that lets engineers implement arbitrary digital circuits using configurable logic blocks (CLBs), programmable I/Os, on-chip memory, and dedicated hard IP such as transceivers, DSP slices, and clock management tiles. FPGAs are part of the programmable logic hierarchy alongside CPLDs and sit between discrete logic and ASICs in system design trade-offs. The XC6SLX16-3FTG256C features 1139 CLBs, 32 DSP48A1 slices, two clock management tiles (CMTs) with mixed-mode clock managers (MMCMs) and PLLs, and SelectIO high-performance I/O supporting LVDS, LVCMOS, LVTTL, SSTL, and HSTL standards across 8 I/O banks. The -3 speed grade targets high-performance designs with up to 667 MHz internal clocking. Typical applications include industrial motor control, video processing pipelines, automotive driver assistance, low-cost wireline aggregation, and embedded control systems. Its small 17 x 17 mm BGA footprint suits cost-sensitive high-volume designs. Design tips: pay careful attention to the banked I/O supply pins (VCCO), keep the auxiliary supply VCCAUX at 2.5 V to 3.3 V, and use the -C commercial temperature grade (0 C to +85 C) only inside chassis environments. This page aggregates DigiKey/Mouser distributor pricing, same-footprint alternatives in the Spartan-6 family, and 45 nm power-rail guidance not found in the manufacturer datasheet.

RFQ संपर्क
XC6SLX16-3FTG256I - Spartan-6 LX FPGA, 14K Logic Cells, 256-FTBGA | AMD Xilinx
XC6SLX16-3FTG256I

XC6SLX16-3FTG256I - Spartan-6 LX FPGA, 14K Logic Cells, 256-FTBGA | AMD Xilinx

The AMD Xilinx XC6SLX16-3FTG256I is a Spartan-6 LX field-programmable gate array (FPGA) integrating 14,579 logic cells (1,139 Configurable Logic Blocks), 589,824 bits of block RAM, and 186 user I/O into a 256-ball fine-pitch thin-ball grid array (FTBGA, 17 x 17 mm, 1.0 mm pitch) package, qualified to the industrial temperature range (-40C to +100C). It belongs to the -3 speed grade, the highest performance tier within the Spartan-6 LX family, and is fabricated on a 45 nm CMOS process that lowers static power relative to earlier 65 nm Spartan generations while preserving the 667 MHz internal operation supported by the silicon. A field-programmable gate array (FPGA) is a semiconductor device built from an array of programmable logic blocks, programmable interconnect, programmable I/O cells, and dedicated hard IP such as block RAM, DSP slices, and clock management tiles. Within the broader taxonomy it sits alongside CPLDs, gate arrays, and ASICs as a re-programmable digital logic device; FPGAs differ from CPLDs mainly in density and architectural granularity, and differ from ASICs by being configurable post-fabrication. The Spartan-6 LX family is positioned by AMD Xilinx as the cost-optimized, low-power member of the Spartan-6 generation, ideal for bridging, display, and motor-control in ASICs and ASSPs. Key features include integrated block RAM up to 589,824 bits, dual 10/100/1000 Mbps Ethernet MAC hardening options, a low-power 45 nm process with 1.2 V core voltage, integrated PCI Express endpoint block in LXT variants, and a programmable I/O voltage range that supports common single-ended and differential standards. The CLB array contains 1,139 logic cells arranged to deliver balanced logic, memory, and DSP resources, and the package's fine-pitch BGA delivers compact board area while keeping signal integrity manageable for the supported I/O rates. Spartan-6 LX uses the proven 45 nm CMOS process and the 6th-generation Xilinx FPGA architecture, bringing logic, block RAM, DSP48A1 slices, and clock management tiles (CMT) into a low-cost fabric. Memory controllers (hard MCBs) support DDR, DDR2, DDR3, and LPDDR external memory interfaces up to 800 Mb/s data rates, and the integrated GTP serial transceivers in LXT parts deliver multi-gigabit connectivity for cost-sensitive serial links. Typical applications for the XC6SLX16-3FTG256I include industrial motor-control and PLC backplanes, low-cost video bridging and consumer display controllers, automotive infotainment and telematics subsystems, machine-vision front ends, and PCIe endpoint cards in cost-sensitive computing. The wide industrial temperature range and high I/O count make it a frequent building block in factory automation and embedded vision designs. When designing with this FPGA, ensure that the I/O bank voltages reference the classfree reference design, ensure that the configuration memory (typically a SPI or BPI flash) is sized for the bitstream, and ensure that the FPGA's power-on sequencing and decoupling network match the Spartan-6 power distribution guidance in UG393 to ensure reliable industrial-temperature operation. Designers should also budget for ISE Design Suite or Vivado (legacy) toolchain support and the appropriate license. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers an at-a-glance view of where the XC6SLX16-3FTG256I fits in the Spartan-6 LX family and what alternatives exist for sourcing continuity.

RFQ संपर्क
XC6SLX16-L1FT256I - 14579-Cell Spartan-6 FPGA | AMD
XC6SLX16-L1FT256I

XC6SLX16-L1FT256I - 14579-Cell Spartan-6 FPGA | AMD

The AMD XC6SLX16-L1FT256I is a Spartan-6 LX field-programmable gate array with 14,579 logic cells, 1,139 configurable logic blocks, a 45 nm CMOS process, and a 256-pin FTBGA package. Designed for system integration and high-volume programmable logic applications, this device combines programmable logic, block RAM, digital signal processing resources, and dedicated I/O in a single package. A field-programmable gate array is a semiconductor device whose digital logic, memory blocks, and I/O assignments are configured after manufacture. The Spartan-6 LX FPGA family sits within the broader hierarchy of programmable logic devices, FPGAs, and semiconductors. This architecture makes the XC6SLX16 suitable when fixed-function logic would be inflexible or when product configurations, interface assignments, and firmware updates must evolve after board fabrication. The Spartan-6 LX configuration provides 14,579 cells and 1,139 CLBs. The listed 1 V supply value identifies the device's low-voltage CMOS operating class, while the 45 nm CMOS process provides the physical technology basis for the logic and embedded resources. The -L1 portion identifies the device speed grade, -I identifies the industrial temperature grade, and FT256 identifies the 256-ball package configuration. The XC6SLX16 family is intended for moderate-complexity embedded systems requiring a higher level of integration than basic programmable logic. Its resources can support parallel data processing, control logic, protocol bridging, memory-intensive control functions, and mixed peripheral interfaces. Because an FPGA configuration determines which circuit is implemented, engineers must account for routing, timing closure, resource utilization, configuration memory, and startup behavior during system design. Typical applications include industrial control equipment, communications infrastructure, embedded data-acquisition systems, test and measurement platforms, video or image-processing modules, and compact embedded systems that require programmable hardware. The 256-ball package also supports dense I/O arrangements, although board construction and signal-integrity performance depend on the selected package, PCB stack-up, and interface rates. Before schematic capture, use the AMD Spartan-6 package pinout files to confirm ball assignments, power rails, configuration pins, and user I/O. Validate every proposed alternative against those package files and the timing constraints of the design; sharing the XC6SLX16 family name alone does not establish interchangeability. This product record combines the verified device identity, package, process, cell count, CLB count, and temperature grade with engineering guidance, comparison data, and design considerations. It helps distinguish the exact ordered part number from related Spartan-6 devices that differ in speed grade, temperature grade, package suffix, or board footprint.

RFQ संपर्क
XC6SLX16-N3FT256I - Spartan-6 LX FPGA, 14,579 Cells | AMD
XC6SLX16-N3FT256I

XC6SLX16-N3FT256I - Spartan-6 LX FPGA, 14,579 Cells | AMD

The AMD Xilinx XC6SLX16-N3FT256I is a Spartan-6 LX field-programmable gate array with 14,579 logic cells, 186 I/O, 45 nm semiconductor technology, and a 1.2 V core supply, housed in a 256-LBGA package. It combines programmable logic, block RAM, and digital signal processing resources in one reconfigurable device. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, memory, and processing blocks are configured after manufacture. FPGA technology sits within programmable logic devices and combines configurable parallel processing, high-speed I/O, and system integration functions. The Spartan-6 LX family is intended for cost-sensitive embedded systems that require substantial programmable logic without the resources of a larger FPGA. The XC6SLX16 device provides 14,579 logic cells and 186 I/O in a 256-LBGA package. Its 45 nm fabrication process supports a compact, high-performance implementation for industrial embedded applications. The N3 ordering code identifies this -3 speed-grade configuration, while FT256I denotes the 256-ball package and industrial-temperature option. Exact block-RAM, DSP, and performance details should be selected from the device-specific Spartan-6 documentation. The device combines three principal programmable resource types: logic cells for Boolean and sequential functions, block RAM for data buffering, and DSP resources for arithmetic-intensive signal processing. These resources allow control logic, data acquisition, communications, and embedded processing to be consolidated in one package, reducing component count compared with a design assembled from separate programmable and fixed-function devices. Typical applications include industrial automation, embedded control, communications equipment, instrumentation, video processing, and sensor acquisition systems. A design can place acquisition logic, protocol handling, filtering, and control functions into one FPGA while using external memory for larger data structures. The 186 available I/O also allow direct connection to external converters, transceivers, memories, and control interfaces. The primary design consideration is package-accurate planning. Use the AMD Spartan-6 package pinout files and device-specific tables when assigning balls, configuring power rails, and routing high-speed interfaces. Differential pairs and clock inputs require controlled layout, while BGA assembly demands thermal analysis and via patterns appropriate to the board stack-up. This page consolidates the verified device identity, package information, source links, practical application guidance, and same-package replacement candidates into an engineering-focused reference. It also distinguishes documented device attributes from parameters that require selection from the full AMD datasheet and configuration tables.

RFQ संपर्क
XC6SLX25-2CSG324C - 24,051-Cell Spartan-6 LX FPGA | AMD
XC6SLX25-2CSG324C

XC6SLX25-2CSG324C - 24,051-Cell Spartan-6 LX FPGA | AMD

The AMD Xilinx XC6SLX25-2CSG324C is a Spartan-6 LX field-programmable gate array with 24,051 logic cells, 958,464 bits of block RAM, and 226 user I/O, packaged in a 324-ball CSPBGA. The device is manufactured on 45 nm CMOS, operates from a 1.2 V core supply, and is offered in the -2 performance grade. Its package measures approximately 15 mm by 15 mm with a 0.8 mm ball pitch. A field-programmable gate array, or FPGA, is a reconfigurable digital semiconductor whose logic, memory, and I/O resources can be programmed after manufacture. Within the device hierarchy, an FPGA belongs to programmable logic rather than fixed-function logic or microcontrollers. The Spartan-6 LX family combines configurable logic, block RAM, digital clock managers, programmable I/O, and embedded MicroBlaze processor resources for systems requiring flexible hardware functions and efficient product customization. The XC6SLX25 provides 1,879 configurable logic blocks, 24,051 logic cells, and 958,464 bits of block RAM according to the manufacturer device documentation. Its 226 user I/O support high-volume parallel interfaces, while integrated digital clock management and differential clock resources simplify clocking and high-speed interface designs. The -2 speed grade provides a 667 MHz maximum figure identified in the device documentation. The 45 nm CMOS implementation is designed to balance programmable functionality, performance, and power in cost-sensitive embedded systems. This device combines considerably more logic and memory than a basic programmable logic device while retaining a high I/O count for control, data acquisition, communications, and signal-processing designs. The industrial design also supports the MicroBlaze soft-processor architecture where a programmable control core is useful. Typical applications include industrial automation controllers, data-acquisition systems, embedded communications equipment, video and image-processing pipelines, instrument control, and low-power embedded processors. The 226-I/O count is especially useful when a board must connect multiple sensors, converters, memories, communications transceivers, and display or control peripherals without using a larger package. PCB implementation requires careful attention to the CSPBGA escape routing and the manufacturer’s package pinout file. Confirm power sequencing, decoupling, clock, configuration, and I/O standards against the device datasheet. Review bitstream compatibility, temperature requirements, and any board-level interface changes before releasing a production design. This page organizes the device’s core specifications, application guidance, package considerations, and same-footprint Spartan-6 options. It also highlights the parameters engineers should compare when determining whether another -grade or temperature-grade member can replace the XC6SLX25-2CSG324C without redesigning the PCB.

RFQ संपर्क
XC6SLX25-2CSG324I - 24,051-Cell Spartan-6 FPGA | AMD
XC6SLX25-2CSG324I

XC6SLX25-2CSG324I - 24,051-Cell Spartan-6 FPGA | AMD

AMD XC6SLX25-2CSG324I is a Spartan-6 LX field-programmable gate array with 24,051 logic cells, 226 user I/Os, a 375 MHz operating frequency, and a 324-ball CSBGA package. It operates from a 1.14 V to 1.26 V core supply and is manufactured using 45 nm FPGA process technology. A field-programmable gate array, or FPGA, is a programmable semiconductor in which configurable logic blocks, routing resources, and input/output resources implement a digital system. Within the semiconductor hierarchy, an FPGA sits above fixed-function logic devices because its interconnect and processing architecture can be programmed after manufacture. The Spartan-6 LX family combines programmable logic with system resources such as block RAM, digital clock managers, and PLL blocks. The XC6SLX25 device provides a useful balance of logic density, I/O availability, and power-management flexibility. Its 226 user I/Os support connections to external memory, control interfaces, communications transceivers, and general-purpose digital peripherals. The speed grade 2 designation identifies its timing class within the Spartan-6 product line, while the CSBGA-324 package supports dense board-level integration in space-constrained embedded systems. Spartan-6 devices use configurable logic and routing resources to implement parallel processing, control, protocol handling, and signal conditioning. The XC6SLX25 also incorporates dedicated resources for clock management and on-chip memory. Its 1.14 V to 1.26 V operating-voltage range identifies it as a core-supply device; board designers still need to follow the AMD Spartan-6 power-supply, decoupling, configuration, and signal-integrity guidance for the complete system. Typical applications include industrial control systems, video and image processing, communications infrastructure, instrumentation, consumer electronics, and embedded control platforms. The 226 available I/Os are particularly useful when an existing design requires numerous external buses, status signals, and high-speed serial or parallel interfaces. The device is also suitable for education and prototyping systems that require a large logic fabric and deterministic programmable behavior. A successful implementation depends on matching the selected Spartan-6 device, package, speed grade, and temperature grade to the PCB design. Use the AMD Spartan-6 package pinout files to assign every BGA ball, and follow the DS162 data sheet for DC and switching characteristics. Confirm configuration-memory support, clocking topology, pin constraints, and power sequencing before releasing a production layout. This product record combines the device's principal architecture and package characteristics with practical substitution analysis, application guidance, comparison parameters, and design checks. It is intended to help engineers identify the correct Spartan-6 LX option and distinguish exact-family substitutions from alternatives that require different packages or materially different resources.

RFQ संपर्क
XC6SLX25-2FG484C - 24,051-Cell Spartan-6 LX FPGA | AMD
XC6SLX25-2FG484C

XC6SLX25-2FG484C - 24,051-Cell Spartan-6 LX FPGA | AMD

The AMD XC6SLX25-2FG484C is a Spartan-6 LX field-programmable gate array with 24,051 logic cells, 266 I/O, a 500 MHz internal frequency, and a 484-ball FBGA package. Built on 45 nm CMOS technology and operating from a 1.2 V core supply, it combines programmable logic, 266 user I/O, and embedded block RAM in a single device. The -2 speed grade supports designs requiring predictable general-purpose FPGA performance, while the commercial temperature option covers 0°C to 85°C. A field-programmable gate array, or FPGA, is a semiconductor whose logic, interconnects, and I/O behavior are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, where it sits above fixed-function logic devices and provides parallel hardware implementation for control, signal processing, communications, and interface functions. Its value comes from combining substantial configurable logic density with reusable intellectual property cores, allowing one package to replace multiple conventional logic components. The Spartan-6 LX family provides 24,051 logic cells for this device, 266 I/O, and 45 nm CMOS fabrication. The -2 designation identifies its performance grade, while the 484-ball package supports dense board routing through an array of solder-ball connections. The device is identified as lead-free and RoHS compliant in the supplied component data. These characteristics make it relevant to industrial control, communications, instrumentation, embedded signal processing, and general-purpose prototyping systems. At the architecture level, the Spartan-6 LX FPGA combines configurable logic blocks with dedicated block RAM and programmable I/O resources. This mixed architecture allows parallel datapaths and state machines to be implemented without relying on a processor for every control function. The supplied data identifies a 500 MHz internal frequency, while actual interface and system timing remain dependent on the selected I/O standards, clocking implementation, board-level routing, external memory interface, and the selected design tools. Typical uses include industrial automation controllers, serial and parallel protocol bridges, data-acquisition front ends, communications equipment, and embedded DSP functions. Its 266 I/O count is particularly useful when a design must connect multiple buses, capture parallel sensor data, or bridge legacy peripheral logic to a modern system. The 484-ball FBGA also reduces board area compared with a large leaded package, but it demands careful escape routing and assembly control. A primary design consideration is package and PCB complexity. Unlike a fine-pitch QFP, the 484-ball FBGA is not visually inspectable after assembly and requires appropriate land patterns, via-in-pad or escape-routing rules, X-ray inspection capability, and controlled solder-assembly profiles. Designers should also confirm power sequencing, decoupling, clock integrity, and I/O voltage compatibility against the complete AMD device documentation before layout release. This page consolidates the verified device identity, package information, commercial listing, and cross-reference findings into an engineering-focused product record. It also distinguishes true package-compatible Spartan-6 options from unrelated FPGA families, helping procurement and hardware teams assess interchangeability without assuming that equivalent logic density guarantees interchangeable pinout, timing, or qualification.

RFQ संपर्क
XC6SLX25-2FG484I - 24,051-Cell Spartan-6 LX FPGA | AMD
XC6SLX25-2FG484I

XC6SLX25-2FG484I - 24,051-Cell Spartan-6 LX FPGA | AMD

AMD/Xilinx XC6SLX25-2FG484I is a Spartan-6 LX FPGA with 24,051 logic cells, 266 I/O, 45 nm CMOS technology, 1.2 V operation, and a 484-pin FBGA package. The -2 speed grade is designed for industrial-temperature operation from 0 C to 85 C, as identified in the verified component listings. The device combines programmable logic, block RAM, DSP resources, and programmable I/O in a single FPGA package, making it suitable for embedded control, communications, industrial automation, signal processing, and general-purpose digital design. Its 484-ball package provides a high-density interconnect arrangement for designs requiring numerous external interfaces. The Spartan-6 LX FPGA family is a programmable-logic device family within the broader FPGA and semiconductor hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA allows logic behavior, interfaces, and signal processing to be configured after manufacture. This flexibility supports design revisions, shorter product-development cycles, and consolidation of multiple control functions into one programmable device when appropriate system partitioning and validation are performed. Key verified characteristics include 24,051 logic cells, 266 I/O, 1.2 V operation, 45 nm CMOS construction, and a 484-pin FBGA package. The -2 speed grade provides a defined performance class within the Spartan-6 LX family. The I/O count makes the device suitable for systems requiring parallel buses, multiple control signals, external memory interfaces, converters, and communication transceivers. Because the package is ball-grid and densely routed, PCB layout requires careful ball assignment, power planning, decoupling, and signal-integrity review. Typical uses include industrial PLC and automation controllers, embedded instrumentation, communications equipment, video and image-processing front ends, and low-power control subsystems. The FPGA can implement parallel algorithms, state machines, protocol bridges, and control logic in parallel, reducing reliance on multiple discrete controllers. Its programming flexibility also allows firmware-like field updates when the surrounding flash and configuration architecture are included. Design considerations center on thermal performance, decoupling, configuration, and high-speed board layout. The 1.2 V core and dense 484-ball package require multiple supply rails and careful placement of bypass capacitors. Designers should use the AMD Spartan-6 package pinout and device documentation for exact ball assignments, power sequencing, configuration pins, and I/O standards before layout release. This page combines verified distributor and manufacturer-source information with package, purchasing, and engineering guidance designed to make the XC6SLX25-2FG484I selection process faster.

RFQ संपर्क
XC6SLX25-2FGG484C - 24K Spartan-6 LX FPGA | AMD
XC6SLX25-2FGG484C

XC6SLX25-2FGG484C - 24K Spartan-6 LX FPGA | AMD

The AMD XC6SLX25-2FGG484C is a Spartan-6 LX field-programmable gate array with 24,051 logic cells, 1,879 configurable logic blocks, and a 500 MHz internal frequency, supplied in a lead-free FBGA package. The device uses 45 nm CMOS technology and supports a 1.2 V core supply. Its industrial temperature option is specified for 0°C to 85°C, making it suitable for embedded control, communications, industrial automation, and signal-processing systems requiring a compact, programmable logic implementation. An FPGA is a semiconductor whose digital behavior is configured after manufacture. It belongs to the programmable-logic hierarchy, combining configurable logic blocks, programmable I/O, memory resources, clocking, and dedicated hard IP into one integrated device. Compared with a fixed-function application-specific integrated circuit, an FPGA permits design revisions, parallel processing, adaptable interfaces, and shorter development cycles when system requirements evolve. The Spartan-6 LX family targets low-cost, low-power programmable designs while retaining a large selection of dedicated resources. The XC6SLX25 provides 24,051 logic cells and 1,879 configurable logic blocks, giving designers more parallel capacity than small CPLDs. Its -2 speed designation identifies the middle Spartan-6 performance option, while the C suffix denotes the commercial operating-temperature grade. The package combines a 484-ball grid with approximately 0.80 mm ball pitch and dimensions listed as 15 mm by 15 mm. Programmable logic is complemented by block RAM, dedicated DSP resources, clock-management circuitry, and high-speed I/O paths. These resources allow designers to implement parallel data paths, protocol bridges, control logic, and fixed-point processing without relying on multiple discrete devices. The internal frequency of 500 MHz establishes the device’s published logic-performance reference, while actual interface throughput depends on the selected I/O standard, clocking, timing constraints, and design implementation. Typical uses include industrial control panels, motor and motion controllers, test equipment, embedded communications, video and image processing, and general-purpose embedded systems. The Spartan-6 architecture is particularly useful when a design requires deterministic parallel logic, numerous peripheral interfaces, or field programmability. It also helps consolidate small CPLD, microcontroller, and discrete logic functions into a single device when board space and inventory reduction are priorities. Board design must account for the dense FBGA footprint, numerous power and ground connections, high-speed I/O constraints, and thermal-management requirements. Use the AMD Spartan-6 package pinout files and the manufacturer’s design-support documentation to assign balls and implement the power grid. Validate power sequencing, decoupling, signal integrity, and timing with the appropriate FPGA implementation flow before releasing the PCB. This page combines device specifications, commercial sourcing guidance, same-package alternatives, comparison criteria, and practical implementation notes. It is intended to help engineers identify the correct Spartan-6 option, assess whether an alternative can replace the target without PCB changes, and plan a robust implementation around the FGG484 package.

RFQ संपर्क
XC6SLX25-2FGG484I - Spartan-6 FPGA 24051 Cells | AMD
XC6SLX25-2FGG484I

XC6SLX25-2FGG484I - Spartan-6 FPGA 24051 Cells | AMD

The AMD XC6SLX25-2FGG484I is a Field Programmable Gate Array (FPGA) from the Spartan-6 LX family, built on a mature 45 nm low-power copper process technology. It delivers 24,051 logic cells, 958,464 bits of block RAM, and 266 user I/O pins in a 484-ball FBGA package (23x23 mm, 1 mm pitch). The device operates at a core voltage of 1.2V and supports internal clock frequencies up to 500 MHz, with a -2 speed grade providing a balanced performance-power trade-off. An FPGA is an integrated circuit that can be programmed after manufacturing to implement any digital logic function. FPGAs belong to the programmable logic device (PLD) family, which sits between ASICs and general-purpose processors in the semiconductor hierarchy. They offer reconfigurability, parallel processing, and low non-recurring engineering costs, making them ideal for prototyping, low-to-mid volume production, and applications requiring hardware flexibility. Key features of the XC6SLX25-2FGG484I include 24,051 logic cells, 52 DSP48A1 slices, 958,464 bits of block RAM, and support for multiple I/O standards including LVCMOS, LVDS, and SSTL. The device also features integrated memory controllers, clock management tiles (CMT) with PLL and DCM, and support for PCI Express (in LXT variants). The -2 speed grade offers a balance between performance and power consumption, with a maximum internal frequency of 500 MHz. The Spartan-6 family is designed for high-volume, cost-sensitive applications, offering half the power consumption of previous Spartan families. The 45 nm process technology enables high logic density and low static power. The device includes advanced power management features such as suspend mode and partial reconfiguration support, allowing dynamic power optimization in battery-powered systems. Typical applications include industrial automation, automotive infotainment, medical imaging, communications infrastructure, and video processing. The 484-ball FBGA package provides ample I/O for interfacing with external memory, ADCs, DACs, and high-speed serial transceivers (in LXT variants). The industrial temperature grade (-40°C to +100°C) makes it suitable for harsh environments. When designing with this FPGA, ensure proper decoupling of the 1.2V core supply and 2.5V/3.3V auxiliary supplies. Use the configuration pins (MODE, DONE, PROG_B) for reliable device programming. The device supports multiple configuration modes including Master SPI, Slave SelectMAP, and JTAG, providing flexibility in system design.

RFQ संपर्क
XC6SLX25-2FT256I - Spartan-6 LX FPGA, 24K Logic Cells | AMD
XC6SLX25-2FT256I

XC6SLX25-2FT256I - Spartan-6 LX FPGA, 24K Logic Cells | AMD

The AMD (formerly Xilinx) XC6SLX25-2FT256I is a Spartan-6 LX Field-Programmable Gate Array (FPGA) integrating 24,051 logic cells, 1,879 Configurable Logic Blocks (CLBs), and 958 Kbits of block RAM in a 256-ball Fine-Pitch Thin Ball Grid Array (FTBGA-256) package. It is built on a 45 nm CMOS process, supports up to 186 user I/O, and runs at internal frequencies up to 500 MHz in this -2 (standard performance) and -I (industrial temperature, -40C to +100C) grade. A Field-Programmable Gate Array (FPGA) is a semiconductor device built around an array of configurable logic blocks (CLBs), programmable interconnect, and dedicated silicon resources such as block RAM, DSP slices, and clock-management tiles (CMTs). FPGAs occupy the middle ground between fixed-function ASICs and software-driven microcontrollers: they deliver ASIC-class parallelism and data-path throughput while remaining fully re-programmable in the field. The Spartan-6 LX family is positioned at the low-cost, low-power end of the AMD/Xilinx FPGA portfolio and is widely used in bridging, motor control, video processing, and industrial automation. Key features of the XC6SLX25-2FT256I include 24,051 logic cells, 1,879 CLBs, 4,824 Kbits of distributed RAM, 38 DSP48A1 slices running up to 390 MHz, 2 CMTs for PLL-based clock management, and a 32-bit MultiBoot configuration controller. Industrial temperature grade -I supports -40C to +100C operation. The FT256 package provides 186 user I/O across 256 balls with 1.0 mm pitch and 17 x 17 mm body. The -2 speed grade offers the standard balance of performance and power consumption for cost-sensitive embedded designs. The architecture pairs 6-input Look-Up Tables (LUT6) with dual flip-flops per slice, enabling efficient state-machine and pipelined datapath implementations. The Memory Controller Block (MCB) supports DDR, DDR2, DDR3, and LPDDR external memories at up to 800 Mb/s, while the SelectIO technology supports voltages from 1.2 V to 3.3 V on the same bank. Typical applications include industrial control and bridging, automotive infotainment head units, motor and servo drive feedback, low-cost video processing, custom glue logic replacement, and consumer electronics requiring low-power parallel DSP. The wide temperature grade also makes it suitable for factory automation and outdoor display systems. When designing with this part, note that Spartan-6 FPGAs require a separate configuration memory or JTAG programming interface; the device does not boot from internal flash. Plan the bank I/O voltage ahead of placement to avoid level-shifter overhead. This page consolidates distributor pricing for the AMD XC6SLX25-2FT256I, drop-in FT256 Spartan-6 variants, and practical design notes that go beyond the manufacturer datasheet summary.

RFQ संपर्क
XC6SLX25-2FTG256C - 24,051-Cell Spartan-6 FPGA | AMD
XC6SLX25-2FTG256C

XC6SLX25-2FTG256C - 24,051-Cell Spartan-6 FPGA | AMD

AMD XC6SLX25-2FTG256C is a Spartan-6 LX field-programmable gate array with 24,051 logic cells, 186 I/O sites, a 500 MHz internal frequency, and a 256-ball lead-free BGA package. The -2 speed grade targets the middle performance class of the Spartan-6 LX family, while the C suffix denotes the commercial temperature range of 0°C to 85°C. Its combination of programmable logic resources and 936 kbit of embedded block RAM supports parallel data processing, control, interface, and embedded-system functions. A field-programmable gate array is a semiconductor whose digital logic is configured after manufacture. An FPGA combines configurable logic blocks, block RAM, programmable I/O, clocking, and dedicated fabric into a single device. Within the product hierarchy, the XC6SLX25 is a Spartan-6 LX FPGA, which belongs to the broader FPGA and programmable-logic device family. Compared with fixed-function logic, an FPGA allows design revisions, parallel interfaces, hardware acceleration, and application-specific sequencing to be implemented in one board revision. The device provides 1,879 logic cells and 3,758 adaptive logic modules according to the published technical listing, together with 936 kbit of embedded memory and 186 I/O. These figures distinguish it from the smaller XC6SLX9 and XC6SLX16 devices in the same family. The 500 MHz internal frequency provides a clear performance reference for clocked digital designs, although actual system performance also depends on the selected architecture, routing, memory interface, and external components. The FTG256 package is identified as a lead-free 256-ball BGA for this device, and the commercial-grade operating range is 0°C to 85°C. A BGA package supports dense PCB routing and is appropriate for compact industrial, communications, control, test, and embedded-processing systems. Because no large exposed thermal pad is indicated for this package, board construction should be reviewed for heat spreading and soldering-process requirements before volume production. Typical uses include industrial control logic, data-acquisition front ends, communications protocol conversion, embedded video and networking interfaces, instrumentation, and hardware accelerators. The 186 available I/O sites are particularly useful for parallel buses, counters, status signals, memory interfaces, and multi-channel data paths. The 936 kbit of embedded RAM allows buffering, packet storage, frame data, lookup tables, and general-purpose on-chip memory. Designers should verify the exact FTG256 ball map, differential-I/O rules, power rails, decoupling, configuration interface, and unused-pin treatment against AMD's Spartan-6 package documentation. PCB layout should preserve short return paths and adequate BGA escape routing, while the clocking and memory interfaces should be constrained according to the device timing specifications. This product page combines the key device specifications, practical integration guidance, commercial sourcing information, and same-package alternatives. It also distinguishes genuine pin-compatible choices from devices in different packages, helping engineers evaluate an FPGA replacement without assuming that similar logic capacity guarantees PCB compatibility.

RFQ संपर्क
XC6SLX25-2FTG256I - 24K Cell Spartan-6 FPGA | AMD
XC6SLX25-2FTG256I

XC6SLX25-2FTG256I - 24K Cell Spartan-6 FPGA | AMD

AMD XC6SLX25-2FTG256I is a Spartan-6 LX field-programmable gate array with 24,051 logic cells, 1,879 configurable logic blocks, 3,758 adaptive logic modules, and 186 user I/Os in a 256-ball FTG256 lead-free BGA package. The -2 speed grade targets a 375 MHz operating performance class, while the industrial suffix indicates an intended operating temperature range of 0°C to 85°C. A field-programmable gate array is a semiconductor whose digital logic, memory, interfaces, and signal paths are configured after manufacture. Within the product hierarchy, an FPGA sits above programmable logic devices and system-programmable semiconductor devices, combining configurable logic, block RAM, digital clock managers, and programmable I/O in one device. The Spartan-6 LX family targets cost-sensitive industrial, consumer, communications, and embedded-control systems requiring substantial parallel processing capability. The XC6SLX25-2FTG256I provides 24,051 logic cells organized into 1,879 CLBs and 3,758 ALMs, along with 186 I/Os. Its integrated DCM and PLL resources support clock generation and phase-shifted clock distribution, while the core supply range is 1.14 V to 1.26 V. The 45 nm CMOS implementation and 256-ball package support dense board layouts without requiring a larger-footprint package. The device is categorized as a Spartan-6 LX FPGA with 3,758 adaptive logic modules and 24,051 logic elements. A comparison listing identifies 1,879 CLBs and a 667 MHz figure for the broader device record, while another specification source describes the target -2 grade at 375 MHz. Designers should therefore use the AMD Spartan-6 family data sheet and the selected speed-grade tables when establishing timing constraints rather than treating aggregate comparison figures as interchangeable timing guarantees. Typical uses include industrial control and factory automation, parallel sensor aggregation, communications infrastructure, display and video interfaces, embedded instrumentation, and compact control systems with many parallel I/O requirements. The 186 available I/Os make the device suitable for bridging external memory, capturing parallel sensor data, and coordinating multiple digital peripherals without requiring several discrete logic devices. When laying out the PCB, follow AMD's FTG256 package pinout files, verify all bank power and ground connections, and decouple each supply rail close to its package pins. Because unused balls can differ across Spartan-6 device densities, use the package files for the exact XC6SLX25 variant and review no-connect assignments before finalizing the board design. This product page combines the XC6SLX25-2FTG256I specifications, package and temperature details, speed-grade alternatives, practical design guidance, and application-specific engineering context to support faster component selection and PCB planning.

RFQ संपर्क