उत्पाद (44,000+)

XMC1201T038F0200ABXUMA1 - 32MHz Cortex-M0 MCU | Infineon
XMC1201T038F0200ABXUMA1

XMC1201T038F0200ABXUMA1 - 32MHz Cortex-M0 MCU | Infineon

The Infineon Technologies XMC1201T038F0200ABXUMA1 is a 32-bit ARM Cortex-M0 industrial microcontroller operating at up to 32 MHz, with 200 KB of Flash memory, 16 KB of SRAM, and 34 general-purpose I/O lines in a 38-terminal PG-TSSOP-38-9 package. Its 1.8 V to 5.5 V operating supply range supports low-voltage industrial, consumer, and embedded-control applications. An industrial microcontroller is a semiconductor device that combines a programmable processor core, embedded nonvolatile memory, data memory, and peripherals on one integrated circuit. The Infineon XMC1200 series belongs to the XMC1000 microcontroller family and uses the ARM Cortex-M0 processor core within the hierarchy of 32-bit MCU, embedded microcontroller, and integrated semiconductor. This architecture combines deterministic control, efficient event-based operation, and compact code execution without requiring an external memory bus. The XMC1201T038F0200ABXUMA1 provides 200 KB of Flash for firmware and 16 KB of SRAM for working data and stack requirements. Its integrated ADC has 12-bit resolution, while 34 I/O lines support digital inputs, outputs, timers, communications, and control functions. The device is specified for an industrial temperature range of -40°C to 85°C and a supply-voltage range of 1.8 V to 5.5 V. The 32 MHz Cortex-M0 core provides a practical balance of processing throughput, power efficiency, and software simplicity for cost-sensitive embedded systems. Peripheral partitioning allows real-time control tasks to coexist with communications and analog measurement. Its 12-bit ADC is suitable for monitoring sensors and process variables where greater resolution is unnecessary, while the 34 available I/O lines reduce the need for external I/O expansion in compact designs. Typical applications include industrial sensor controllers, building automation modules, appliance control boards, motor and relay-control systems, battery-powered monitoring equipment, and compact communication peripherals. The XMC1201 family is particularly useful when a design needs deterministic control from a 1.8 V to 5.5 V supply while retaining embedded Flash and a moderate number of general-purpose I/O pins. PCB planning should account for the 38-terminal PG-TSSOP-38-9 land pattern, exposed thermal-pad requirements, and the pin-assignment table in the manufacturer package drawing. Decoupling and analog-ground layout should follow the recommended application circuit, while exposed-pad copper improves thermal performance without introducing high-frequency switching noise into sensitive measurements. This product resource combines the Infineon ordering information, memory and analog specifications, package details, lifecycle status, drop-in alternatives, comparison parameters, and practical implementation guidance to support component selection and PCB design for XMC1200-series industrial control systems.

RFQ संपर्क
XMC1202T028X0032AAXUMA1 - 32MHz Cortex-M0 MCU | Infineon
XMC1202T028X0032AAXUMA1

XMC1202T028X0032AAXUMA1 - 32MHz Cortex-M0 MCU | Infineon

Infineon Technologies XMC1202T028X0032AAXUMA1 is a 32-bit ARM Cortex-M0 industrial microcontroller operating at 32 MHz, with 32 KB of flash memory and 16 KB of SRAM in a PG-TSSOP-28-16 package. The device combines a single Cortex-M0 core with 20 I/O pins, 14-channel 12-bit ADC capability, and communication interfaces including I2C, LIN, SPI, and UART/USART. An ARM Cortex-M0 microcontroller is a compact 32-bit embedded-control component designed to execute firmware, monitor analog signals, and coordinate digital peripherals. Within the product hierarchy, this device belongs to the microcontroller, embedded processor, and semiconductor categories. Its combination of modest flash and SRAM capacity, mixed-signal peripherals, and industrial positioning makes it suitable for compact control nodes that do not require a high-performance application processor or a large memory footprint. The principal features of the XMC1202T028X0032AAXUMA1 include a 32 MHz Cortex-M0 core, 32 KB flash, 16 KB SRAM, 20 I/O pins, and a 14-channel 12-bit ADC. Integrated serial interfaces support I2C, LIN, SPI, and UART/USART communication. Additional system functions identified in the product documentation include brown-out detection and reset, I2S, power-on reset, PWM, and a watchdog timer, enabling compact designs to handle analog measurement, communications, timing, and supervisory functions without separate discrete devices. The XMC1000 family is manufactured using a 65 nm process and targets applications that need more capability than an 8-bit controller while keeping system complexity and memory requirements controlled. Firmware execution is handled by the ARM Cortex-M0 core, while the ADC, PWM, communication peripherals, watchdog, and reset functions support embedded acquisition and actuator-control designs. The 28-pin package also provides a practical footprint for medium-density industrial and embedded-control boards. Typical uses include industrial sensor modules, LIN-connected automotive and building-control nodes, compact motor-control systems, communications equipment, and low-cost data-acquisition controllers. The I2C and SPI interfaces allow the MCU to connect sensors and external memory, while UART/USART and LIN support point-to-point or network communications. The 14-channel 12-bit ADC is particularly useful for monitoring multiple analog inputs in compact equipment. A critical design consideration is analog-signal conditioning. The ADC input range, source impedance, acquisition time, reference-voltage stability, and grounding must be evaluated together, and the package power and ground pins should be connected with short, low-impedance PCB paths. Firmware must also configure the appropriate clock, reset, watchdog, and peripheral pins before normal operation. This page combines manufacturer specifications, interface details, application guidance, and a verified same-package option into a compact engineering reference. It is intended to help designers evaluate memory, analog conversion, communications, package, and replacement requirements before beginning PCB layout or firmware development.

RFQ संपर्क
XMC1202T028X0032ABXUMA1 - 32MHz Cortex-M0 MCU | Infineon
XMC1202T028X0032ABXUMA1

XMC1202T028X0032ABXUMA1 - 32MHz Cortex-M0 MCU | Infineon

The Infineon Technologies XMC1202T028X0032ABXUMA1 is an industrial 32-bit ARM Cortex-M0 microcontroller operating up to 32 MHz, with 32 KB of flash memory, 16 KB of SRAM, and a 28-pin PG-TSSOP-16 package. It combines a compact general-purpose microcontroller platform with a 12-bit ADC and an operating-voltage range of 1.8 V to 5.5 V for embedded control, sensing, and industrial automation designs. An ARM Cortex-M0 microcontroller is a low-complexity 32-bit processor within the embedded microcontroller hierarchy. It combines a general-purpose CPU core, flash program memory, SRAM, digital peripherals, and analog interfaces in one integrated circuit. The Cortex-M0 architecture is designed for compact control systems where deterministic execution, low peripheral complexity, and economical integration are more important than high-performance computing or a large memory map. The XMC1202 provides 32 KB of flash for application code and 16 KB of SRAM for working data. Its 32 MHz operating frequency supports responsive control loops, while the 12-bit ADC enables direct measurement of analog sensor signals without a separate converter. The 1.8 V to 5.5 V operating range accommodates industrial 3.3 V systems as well as lower-voltage designs where suitable. An integrated temperature sensor and the XMC1000 family’s application-oriented peripherals further broaden its usefulness for compact embedded nodes. The device belongs to Infineon’s XMC1000 family, a series of industrial microcontrollers built around ARM Cortex-M0. Its architecture prioritizes a compact instruction set, moderate memory capacity, and integration of common analog and digital control functions. These characteristics make the XMC1202 appropriate for cost-sensitive applications that do not require the processing power, memory density, or peripheral breadth of a high-end microcontroller family. Typical uses include industrial sensor modules, building automation endpoints, motor and actuator controllers, compact power-conversion controllers, and low-cost connected equipment. The combination of 32 KB flash, 16 KB SRAM, a 12-bit ADC, and a 28-pin package allows a complete control node to fit on a small PCB while retaining enough memory for protocol handling, calibration, and supervisory logic. PCB design should preserve the package’s thermal and electrical layout constraints, route analog inputs away from fast digital signals, and place decoupling capacitors close to the supply pins. Because this ordering code uses a 16-lead implementation within a 28-pin body, designers should follow the Infineon package drawing and pin-description table rather than assuming a conventional 28-lead assignment. This page combines the manufacturer’s ordering information, package and memory characteristics, replacement options, application guidance, and engineering design notes. It is intended to help engineers evaluate whether the XMC1202 meets a board’s processing, analog, memory, package, and lifecycle requirements before beginning hardware or firmware development.

RFQ संपर्क
XMC1301Q040F0008ABXUMA1 - 32MHz Cortex-M0 MCU, 8KB Flash | Infineon
XMC1301Q040F0008ABXUMA1

XMC1301Q040F0008ABXUMA1 - 32MHz Cortex-M0 MCU, 8KB Flash | Infineon

The Infineon XMC1301Q040F0008ABXUMA1 is a 32-bit ARM Cortex-M0 industrial microcontroller from the XMC1000 family, clocked at 32 MHz with 8 KB of Flash and 16 KB of SRAM, housed in a PG-VQFN-40-13 package (40-pin VQFN, 5x5 mm) with an exposed pad. It integrates the MATH co-processor (CCU6, two Capture/Compare Units) targeted at digital power conversion and industrial motor control, while retaining the ARM Cortex-M0 instruction set for software portability across the XMC family. An ARM Cortex-M0 microcontroller (MCU) is a 32-bit microprocessor core built around the von Neumann architecture with a Thumb-2 instruction set subset, optimized for minimal silicon area and ultra-low active power consumption. The XMC1000 family sits in Infineon's industrial MCU hierarchy: Cortex-M0 (XMC1000) -> Cortex-M3 (XMC4000) -> Cortex-M4F (XMC4500) -> 32-bit industrial microcontrollers, typically used where 8-bit legacy designs cannot deliver the required computational throughput, deterministic timing, or peripheral integration for power-electronic feedback loops. Key features include the CCU6 peripheral for PWM generation with dead-time insertion and emergency stop, a 12-bit A/D converter with up to 12 channels for current/voltage sensing, MATH coprocessor hardware divide, peripheral clock support up to 64 MHz, and a supply voltage range of 1.8 V to 5.5 V. The 32 MHz CPU frequency combined with the deterministic CCU6 timer cluster makes this device well-suited to the digital control loop bandwidth demanded by 100 kHz-class switch-mode power supplies (SMPS) and low-power field-oriented motor control. The architecture is a single-core Cortex-M0 with on-chip Flash, single-cycle multiplier (32-bit result), an AHB-APB peripheral bridge, and Infineon-specific peripherals including the HRPWM (high-resolution PWM) module and a hardware CRC engine. The MATH coprocessor accelerates 32-bit divide and saturation arithmetic for SMPS compensation networks and Clarke/Park transforms on small BLDC motors. Typical applications include digital power supply PFC and PFC+LLC controllers, low-end BLDC/PMSM sensorless fan pumps, LED lighting drivers, and consumer/industrial sensor conditioning. The wide operating voltage range and on-chip peripherals make it popular in 24V industrial sensor hubs and appliance sub-modules that previously relied on discrete 8-bit microcontrollers. When designing with the XMC1301Q040, ensure the exposed thermal pad is soldered to a ground copper pour of at least 50 mm² to meet the theta_JA specified in the datasheet. The CCU6 dead-time register must be loaded before enabling the PWM outputs to avoid shoot-through on a half-bridge. This page synthesizes distributor pricing from DigiKey/Mouser/LCSC, XAIPART partner dropshipping stock levels, and practical design notes that complement the manufacturer's 78-page datasheet with curated cross-references and lifecycle guidance.

RFQ संपर्क
XMC1301Q040F0032ABXUMA1 - 32MHz Cortex-M0 Industrial MCU
XMC1301Q040F0032ABXUMA1

XMC1301Q040F0032ABXUMA1 - 32MHz Cortex-M0 Industrial MCU

Infineon Technologies XMC1301Q040F0032ABXUMA1 is a 32-bit ARM Cortex-M0 industrial microcontroller with a 32 MHz operating frequency, 32 KB of flash memory, 16 KB of SRAM, and 35 I/O lines in a 40-pin PG-VQFN-13 package. It operates from 1.8 V to 5.5 V, supports 3.3 V and 5 V systems, and includes an integrated analog-to-digital converter for embedded control applications. A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, volatile data memory, peripherals, and I/O in one device. The ARM Cortex-M0 core uses a compact 32-bit RISC architecture designed for cost-sensitive embedded control. Within the product hierarchy, the XMC1301 belongs to the XMC1000 family of Cortex-M0 microcontrollers, combining general-purpose digital control with mixed-signal sensing functions. The XMC1301Q040F0032ABXUMA1 provides 32,768 bytes of flash for firmware and 16,384 bytes of SRAM for working data. Its 35 I/O lines support digital interfaces, timers, and control outputs. The integrated ADC adds analog measurement capability without requiring a separate converter. Operation across a 1.8 V to 5.5 V supply range provides flexibility for industrial control, power conversion, sensor acquisition, and low-cost embedded equipment. At its stated 32 MHz maximum operating frequency, the Cortex-M0 core provides a practical balance between processing throughput, power consumption, and design simplicity. The industrial ordering designation identifies the device as intended for industrial temperature operation from -40°C to +85°C. Its compact 40-pin VQFN package also includes an exposed pad, requiring careful PCB layout and adequate thermal copper for reliable heat dissipation. Typical uses include digital power conversion, motor and actuator control, industrial sensor interfaces, compact PLC functions, consumer equipment, and general embedded control. The ADC, timer resources, and GPIO complement one another in designs that must acquire analog measurements, execute control laws, and drive external circuitry from a single controller. The most important PCB consideration is the exposed thermal pad beneath the VQFN package. Place the device according to the Infineon PG-VQFN-40-13 land pattern, connect the exposed pad to the ground plane, and use short power and ground connections. Confirm that the regulator, crystal or clock components, decoupling capacitors, and programming interface meet the voltage and timing requirements in the manufacturer datasheet. This product page combines core XMC1301 specifications, package and ordering information, practical PCB guidance, same-family drop-in options, and application-focused design context. It is intended to help engineers evaluate the XMC1301Q040F0032ABXUMA1 quickly before completing schematic, footprint, firmware, and qualification checks.

RFQ संपर्क
XMC1302Q024F0064ABXUMA1 - 32MHz 64KB MCU | Infineon
XMC1302Q024F0064ABXUMA1

XMC1302Q024F0064ABXUMA1 - 32MHz 64KB MCU | Infineon

Infineon XMC1302Q024F0064ABXUMA1 is a 32-bit industrial ARM Cortex-M0 microcontroller operating up to 32 MHz, with 64 KB of embedded flash, 16 KB of SRAM, and a PG-VQFN-24-19 surface-mount package. The device belongs to the XMC1000 family and combines a compact general-purpose microcontroller core with mixed-signal acquisition and multi-protocol serial connectivity for embedded control applications. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals into one integrated circuit. The ARM Cortex-M0 processor architecture follows the hierarchy MCU → microcontroller → embedded processor → semiconductor. It is designed for compact control systems that execute firmware, acquire analog or digital inputs, control outputs, and communicate with external equipment. The XMC1302 family targets industrial applications where mixed-signal control and connectivity are required within a small board area. Key features include a 32 MHz operating frequency, single-core ARM Cortex-M0 architecture, 64 KB flash organized as 64K x 8, and 16 KB SRAM. The 24-pin PG-VQFN-24-19 package supports surface-mount assembly, while the industrial ordering designation identifies the device as an industrial XMC1300 variant. These resources support event-driven control loops, parameter monitoring, communication gateways, and compact embedded controllers. The XMC1302-Q024 device family is centered on a 32-bit Cortex-M0 processing core and operates from 3.3 V or 5 V system rails. Its mixed-signal acquisition capability allows software to monitor physical inputs without requiring a separate high-resolution converter in many designs. Multi-protocol serial connectivity supports integration with sensors, actuators, industrial nodes, and service interfaces while preserving a compact 24-pin footprint. Typical uses include industrial sensor controllers, building automation modules, actuator-control boards, connected industrial equipment, and compact embedded monitoring systems. Engineers can use the 16 KB SRAM for working state and communication buffers, while the 64 KB flash stores application firmware, configuration data, and boot code. The 32 MHz operating rate provides deterministic task scheduling for protocols and control logic. When laying out a design, reserve a dedicated ground reference for the exposed pad and follow the package-specific land-pattern and thermal-via requirements in the Infineon datasheet. Confirm the supported voltage range, peripheral availability, pin multiplexing, and programming configuration for the exact ordering code before releasing the PCB. This page combines the manufacturer's XMC1302-Q024 device information with package-aware selection guidance, verified ordering alternatives, and practical design context. It helps engineers identify whether the 32 MHz Cortex-M0 architecture, 64 KB flash, 16 KB SRAM, and PG-VQFN-24-19 package align with an industrial embedded-control design.

RFQ संपर्क
XMC1302T038X0032AAXUMA1 32MHz Cortex-M0 MCU | Infineon
XMC1302T038X0032AAXUMA1

XMC1302T038X0032AAXUMA1 32MHz Cortex-M0 MCU | Infineon

Infineon XMC1302T038X0032AAXUMA1 is an industrial 32-bit microcontroller based on the Arm Cortex-M0 core, operating at 32 MHz with 32 KB of Flash program memory and 16 KB of RAM. The device is offered in a 38-pin PG-TSSOP-38-9 surface-mount package for compact embedded-control and industrial applications. A microcontroller is an integrated circuit that combines a processor core, program memory, data memory, and peripherals into one device. The XMC1000 family belongs to the hierarchy of embedded microcontroller, 32-bit microcontroller, Arm Cortex-M0 processor, and semiconductor. Its Cortex-M0 architecture provides a compact, low-complexity platform for cost-sensitive control systems that require deterministic peripheral access and efficient embedded software. The XMC1302T038X0032AAXUMA1 combines a 32-bit Cortex-M0 processor with 32 KB Flash and 16 KB RAM. Its 32 MHz operating frequency supports responsive control-loop execution, while the PG-TSSOP-38-9 package supports surface-mount assembly on compact industrial boards. The ordering designation identifies the XMC1302 device, TSSOP-38 package configuration, 32 KB Flash configuration, and an industrial temperature-class option. Within the XMC1000 product family, the XMC1302 combines an Arm Cortex-M0 processor with a focused set of embedded-control resources. The 32-bit architecture handles addresses, arithmetic, and control logic efficiently, while the 16 KB SRAM provides working memory for real-time control tasks. Flash retains the firmware after power removal, allowing a standalone embedded-control system to boot and execute its programmed sequence without an external program-memory device. Typical uses include low-cost embedded controllers, industrial automation modules, digital power-conversion controls, sensor-processing equipment, and compact monitoring systems. The 38-pin package provides a substantial pin count for a microcontroller in the TSSOP format, although the final board design must follow the manufacturer package drawing and pin-description tables for exact signal assignments and exposed-pad requirements. A primary design consideration is that software, peripheral configuration, clock planning, and pin multiplexing must match the device-specific datasheet. Before release, validate startup behavior, unused-pin handling, decoupling, programming, and the thermal performance of the assembled board under the highest expected ambient temperature. This product record combines the verified XMC1302T038X0032AAXUMA1 specifications, manufacturer package information, ordering details, and documented same-package alternatives. It also adds application guidance, comparison criteria, and design notes focused on practical embedded-system integration rather than simply repeating the catalog description.

RFQ संपर्क
XMC1302T038X0200A - 32MHz Cortex-M0 MCU | Infineon
XMC1302T038X0200A

XMC1302T038X0200A - 32MHz Cortex-M0 MCU | Infineon

Infineon Technologies XMC1302T038X0200A is a 32-bit ARM Cortex-M0 industrial microcontroller operating at 32 MHz, with 200 KB of flash memory, 16 KB of SRAM, and a 34-I/O PG-TSSOP-38-9 package. It is designed for embedded control, industrial automation, and connected sensor applications requiring deterministic peripheral operation and compact surface-mount integration. What is an ARM Cortex-M0 microcontroller? A microcontroller is a semiconductor device that combines a processor core, memory, analog interfaces, timers, communication peripherals, and digital I/O in one integrated circuit. The ARM Cortex-M0 is a compact 32-bit processor core intended for cost-sensitive embedded systems. The XMC1302 family belongs to the industrial microcontroller hierarchy: MCU, embedded processor, semiconductor, and electronic component. The verified product data identifies an ARM Cortex-M0 core, 32-bit architecture, 32 MHz operating frequency, 200 KB flash, 16 KB SRAM, and a 34-I/O package. The associated Infineon family page describes the device as an industrial MCU with a TSSOP-38 package. These resources make it suitable for motor and machine control, sensor conditioning, digital I/O expansion, communications interfaces, and compact embedded platforms. The 200 KB flash memory supports firmware storage, while the 16 KB SRAM supports working memory for control logic, data acquisition, and peripheral buffering. The 32 MHz operating speed provides a defined computational basis for real-time control loops. The industrial positioning also indicates that the component is intended for embedded applications rather than general-purpose computing. Typical use cases include PLC peripheral modules, industrial sensor nodes, motor-control supervisory logic, building automation controllers, and industrial communication bridges. The compact PG-TSSOP-38-9 package supports surface-mount assembly but requires careful PCB layout and thermal verification for the final operating environment. The supplied distributor and manufacturer results do not provide verified pricing, pin-level details, temperature limits, or complete electrical timing tables, so those values must be confirmed against the manufacturer datasheet before release to production. This page combines the verified Infineon family specifications with practical sourcing, design, and replacement guidance. The provided data does not establish a pin-compatible substitute, current price, lead time, stock status, or complete pinout; engineers should validate those items directly with Infineon or an authorized distributor.

RFQ संपर्क
XMC1302T038X0200AAXUMA1 - 32MHz ARM Cortex-M0 MCU | Infineon
XMC1302T038X0200AAXUMA1

XMC1302T038X0200AAXUMA1 - 32MHz ARM Cortex-M0 MCU | Infineon

The Infineon Technologies XMC1302T038X0200AAXUMA1 is a 32-bit ARM Cortex-M0 microcontroller operating at 32 MHz, with 200 KB of flash memory, 16 KB of SRAM, and support for 3.3 V and 5 V operation. It is packaged in a 38-pin PG-TSSOP-38-9 surface-mount package for compact industrial control systems. An ARM Cortex-M0 microcontroller is a reduced-instruction-set processor designed for embedded control applications. Within the product hierarchy, the XMC1302 belongs to the XMC1000 family of industrial microcontrollers, combining a 32-bit processor core with integrated flash, SRAM, and communication peripherals. This architecture supports deterministic control tasks while keeping system complexity and power requirements relatively low. The device provides 200 KB of flash for program storage and 16 KB of SRAM for working data. Its 32 MHz operating frequency supports general-purpose embedded processing, while the 38-pin TSSOP package provides a high pin count for mixed-signal and peripheral connections without requiring a large-footprint BGA package. Operation from 3.3 V and 5 V supply environments makes the device suitable for industrial equipment and other embedded platforms using conventional logic voltage rails. The XMC1302 integrates the ARM Cortex-M0 core with the XMC1000 peripheral family. Independent instruction execution and a compact 16 KB SRAM footprint make it appropriate for control loops, communication gateways, and supervisory tasks where predictable firmware execution and manageable memory requirements are important. The exact peripheral configuration, timer resources, and analog performance should be confirmed against the device-specific datasheet before final design release. Typical applications include industrial sensor controllers, building automation modules, motor supervisory controllers, communication equipment, and compact embedded control panels. The 38-pin package is useful when a design requires more I/O than a small 20-pin or 32-pin MCU can offer while still supporting automated PCB assembly. Tape-and-reel ordering is identified by the trailing XUMA1 code. PCB layout should preserve the manufacturer's recommended power, ground, decoupling, and clock connections. Place decoupling capacitors close to the supply pins, route sensitive analog signals away from fast-switching nodes, and include test access for programming and debugging. Before production, verify the exact exposed-pad or thermal requirements associated with the selected package drawing. This product record combines the manufacturer ordering information, package data, memory configuration, and cross-reference results into a practical engineering reference. It also highlights the boundary between a confirmed device variant and any true pin-compatible replacement, helping designers avoid assuming that similar ARM Cortex-M0 parts can occupy the same PCB footprint.

RFQ संपर्क
XMC1302T038X0200ABXUMA1 - 32MHz ARM Cortex-M0 | Infineon
XMC1302T038X0200ABXUMA1

XMC1302T038X0200ABXUMA1 - 32MHz ARM Cortex-M0 | Infineon

Infineon Technologies XMC1302T038X0200ABXUMA1 is a 32-bit ARM Cortex-M0 microcontroller operating at up to 32 MHz, with 200 KB of flash memory, 16 KB of SRAM, and a 38-pin PG-TSSOP package. It is designed for cost-sensitive embedded-control applications that combine deterministic peripheral-driven control with low-cost 32-bit processing. A microcontroller is a programmable semiconductor device containing a processor core, memory, and integrated peripherals. The ARM Cortex-M0 core provides a compact instruction set and event-driven architecture for real-time control. Within the product hierarchy, the XMC1302 belongs to the XMC1000 family of industrial 32-bit microcontrollers, combining mixed-signal acquisition, timer and PWM control, serial connectivity, and general-purpose embedded processing in one package. Key features include a maximum CPU frequency of 32 MHz, 200 KB of program flash, 16 KB of SRAM, and operation from 3.3 V or 5 V supplies. Mixed-signal acquisition supports embedded measurement functions, while timer and PWM resources suit motor, power-conversion, and general digital-control systems. The 38-pin PG-TSSOP-38-9 package provides a practical surface-mount option for designs requiring extensive I/O without moving to a larger leaded package. The Cortex-M0 processing architecture is suitable for supervisory and real-time control tasks where deterministic peripheral operation, compact code size, and low implementation complexity matter more than high-performance computation. The XMC1000 application focus includes low-cost embedded control and digital power conversion, where the integrated timers, communications peripherals, and analog acquisition resources can reduce external component count. Typical uses include digital power converters, motor-control supervisory functions, industrial automation modules, sensor-conditioning systems, communications controllers, and compact embedded-control boards. The 32 MHz processing rate supports responsive control loops while the 200 KB flash area provides room for application firmware, boot code, configuration data, and library routines. For PCB implementation, use the manufacturer pin-description table and PG-TSSOP-38-9 footprint when assigning every signal. Check power, ground, decoupling, programming-interface, reset, clock, and analog-pin assignments before routing. Stable operation depends on correct supply voltage selection, adequate local bypass capacitance, clean analog grounding, and firmware initialization of every enabled peripheral. This page summarizes the principal device characteristics and organizes practical information for sourcing and design review, including package details, application suitability, verified source links, engineering considerations, and qualified drop-in alternatives for footprint-compatible designs.

RFQ संपर्क
XMC1402F064X0200AAXUMA1 - 48MHz Cortex-M0 MCU | Infineon
XMC1402F064X0200AAXUMA1

XMC1402F064X0200AAXUMA1 - 48MHz Cortex-M0 MCU | Infineon

Infineon Technologies XMC1402F064X0200AAXUMA1 is an industrial 32-bit ARM Cortex-M0 microcontroller operating at up to 48 MHz, with 200 KB of flash memory, 16 KB of SRAM, and a 64-pin LQFP package. The device combines a 32-bit RISC core with a hardware MATH coprocessor for efficient arithmetic operations in embedded industrial control systems. Its operating supply range extends from 1.8 V to 5.5 V. An MCU is a programmable system-on-chip used to acquire sensor inputs, execute control algorithms, operate communication peripherals, and manage actuators. The XMC1000 family belongs to the embedded microcontroller hierarchy: MCU → 32-bit microcontroller → ARM Cortex-M0 microcontroller → industrial control MCU. Infineon positions the XMC1402 for cost-sensitive embedded applications where deterministic control, general-purpose peripheral integration, and a compact 64-pin package are important. Key device attributes include 48 MHz Cortex-M0 processing, 200 KB of flash, 16 KB of SRAM, and hardware-assisted mathematical computation. The 200 KB flash provides room for application code, configuration data, and boot routines, while the 16 KB SRAM supports working memory and real-time control tasks. The 64-pin LQFP package also provides a larger pin count than small QFN packages, facilitating accessible routing and prototyping on conventional printed circuit boards. The device belongs to Infineon's XMC1000 industrial microcontroller family. Its Cortex-M0 architecture provides a common instruction set and compact processing core suitable for embedded control. The hardware MATH coprocessor offloads supported mathematical operations from the main core, potentially reducing execution time in control, signal-processing, and calculation-heavy routines. This architecture supports deterministic embedded workloads without requiring a separate digital signal processor. Typical uses include industrial sensor controllers, motor and actuator control equipment, building automation modules, power-conversion controllers, communication gateways, and compact embedded platforms requiring multiple peripheral connections. The LQFP-64 package is particularly useful when a design needs adequate I/O access, prototyping visibility, or conventional pick-and-place assembly rather than a very small board footprint. Designers should account for pin multiplexing, supply decoupling, clock configuration, programming interface requirements, and the operating conditions of connected sensors and actuators. Firmware should also use the Infineon pin-description table and reference documentation to assign every package pin correctly, particularly for functions that can be routed to several alternate pins. This page combines manufacturer specifications, memory and package details, practical industrial-control applications, replacement considerations, and PCB-focused design guidance. It also distinguishes confirmed drop-in options from variants that require package or firmware changes, helping engineers evaluate replacement decisions before committing to a PCB revision.

RFQ संपर्क
XMC1402Q040X0032AAXUMA1 - 48MHz Cortex-M0 MCU | Infineon
XMC1402Q040X0032AAXUMA1

XMC1402Q040X0032AAXUMA1 - 48MHz Cortex-M0 MCU | Infineon

Infineon Technologies XMC1402Q040X0032AAXUMA1 is a 32-bit ARM Cortex-M0 microcontroller operating at 48 MHz, with 32 KB of flash memory, in a PG-VQFN-40-17 package measuring 5 × 5 mm. The XMC1400 series targets cost-sensitive embedded control applications, including motor control, power conversion, LED lighting, and human-machine interfaces. An ARM Cortex-M0 microcontroller is a reduced-instruction-set processor designed for compact embedded systems. It combines a deterministic execution model with integrated memory, peripherals, and control-oriented I/O. Within the broader semiconductor hierarchy, this device belongs to the microcontroller class, where an embedded CPU, flash program memory, and application-specific peripherals operate from a single package. The XMC1402Q040X0032AAXUMA1 provides a 48 MHz clock, a 32-bit single-core architecture, and 32 KB of flash organized as 32K × 8. Its operating supply options include 3.3 V and 5 V. The 40-pin VQFN package supports a compact surface-mount implementation for industrial control boards, where package area, pin count, and thermal performance affect layout density. The XMC1400 family is optimized around embedded motor-control and power-conversion workloads. This device is intended to combine a low-cost Cortex-M0 core with control peripherals and communication functions in one package. Its 48 MHz processing rate provides practical control-loop performance for digital motor regulation, power-stage supervision, illumination control, and compact industrial automation systems. Typical uses include brushless DC motor controllers, switched-mode power-conversion equipment, LED lighting systems, and HMI control modules. The device is also appropriate for auxiliary controllers where a small MCU package, low-cost embedded architecture, and dedicated control peripherals are more important than a high-end graphics processor or large memory footprint. PCB implementation should follow the manufacturer’s PG-VQFN-40-17 land pattern, including the exposed thermal pad and its required copper area. Confirm decoupling, exposed-pad soldering, and adjacent high-current routing against the manufacturer datasheet and reference-manual recommendations before releasing the PCB for production. This product page combines manufacturer device identification, verified distributor availability information, application-specific engineering guidance, and drop-in replacement analysis. It helps designers evaluate the XMC1402Q040X0032AAXUMA1 against same-package family alternatives without overlooking flash-capacity differences, package constraints, or firmware-migration requirements.

RFQ संपर्क
XMC1402Q040X0128AAXUMA1 - 48MHz 128KB MCU | Infineon
XMC1402Q040X0128AAXUMA1

XMC1402Q040X0128AAXUMA1 - 48MHz 128KB MCU | Infineon

The Infineon XMC1402Q040X0128AAXUMA1 is a 32-bit Arm Cortex-M0 industrial microcontroller with a 48 MHz operating frequency, 128 KB of embedded Flash memory, and 16 KB of SRAM in a 40-pin PG-VQFN-17 package. It belongs to the XMC1000 family, where the XMC1400 series targets cost-sensitive embedded control systems for motor control, power conversion, LED lighting, and human-machine interfaces. The 128 KB Flash and 16 KB SRAM configuration provides enough local storage for control firmware, parameter tables, and modest real-time processing workloads. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The Arm Cortex-M0 core provides a compact instruction set and deterministic execution model suitable for embedded control. Within the product hierarchy, this MCU is an embedded microcontroller, part of the broader semiconductor category, while the XMC1400 family adds mixed-signal and timing resources intended specifically for industrial automation applications. Key features include 48 MHz processing, 128 KB Flash, 16 KB SRAM, and a 32-bit Arm Cortex-M0 core. These figures make the device suitable for embedded motor and power-control loops where deterministic peripheral timing and local program execution are more important than high-end processor performance. Its 40-pin VQFN package also supports compact PCB layouts while providing a larger pin count than small-entry-level packages. The XMC1400 series combines a microcontroller core with resources for motor control, power conversion, LED lighting, and HMI designs. Although the manufacturer product page identifies the XMC1402-Q040X0128-AA industrial configuration, detailed peripheral assignments, electrical limits, clock architecture, and package dimensions must be confirmed in the XMC1400 manufacturer datasheet before schematic release. The exposed-pad package also requires thermal-pad layout and soldering practices that follow the datasheet land pattern. Typical applications include digital motor controllers, industrial power-conversion modules, LED lighting controllers, and compact HMI control boards. In each case, the MCU can execute real-time control logic while onboard peripherals handle timing, communications, and signal acquisition. A system designer should partition deterministic tasks between hardware timers and the Cortex-M0 core to maintain repeatable update timing. For PCB implementation, place all required decoupling capacitors close to their associated supply pins, connect the exposed thermal pad to a carefully sized ground or thermal copper area, and preserve the manufacturer-defined footprint. Avoid changing the VQFN land pattern based only on nominal pin count; pad dimensions, pitch, thermal-pad geometry, and paste-volume recommendations must follow the official package drawing. This product page combines the exact ordering information with application-focused engineering guidance, package constraints, selection trade-offs, and verified manufacturer and distributor resources. It is intended to help engineers confirm memory capacity, industrial positioning, package compatibility, and implementation requirements before committing an XMC1402 design to production.

RFQ संपर्क
XMC1402Q048X0128AAXUMA1 48MHz Cortex-M0 MCU | Infineon
XMC1402Q048X0128AAXUMA1

XMC1402Q048X0128AAXUMA1 48MHz Cortex-M0 MCU | Infineon

The Infineon XMC1402Q048X0128AAXUMA1 is a 32-bit ARM Cortex-M0 industrial microcontroller operating at up to 48 MHz, with 128 KB of embedded flash memory and 16 KB of RAM, housed in a PG-VQFN-48-73 package. It belongs to the Infineon XMC1000 family, a low-cost embedded-control platform designed for motor control, power conversion, LED lighting, and human-machine interface applications. The part provides a compact combination of general-purpose control, analog peripherals, and industrial-oriented embedded features. An ARM Cortex-M0 microcontroller is a reduced-instruction-set processor designed for deterministic embedded control. The Cortex-M0 core combines a simple architecture with a broad embedded software ecosystem, allowing designers to implement control loops, communication services, and supervisory functions without the complexity of a high-end application processor. Infineon positions the XMC1000 family within the broader hierarchy of embedded microcontroller, embedded processor, and semiconductor devices. The XMC1402 device is specified for a 48 MHz maximum clock frequency, 128 KB of flash for program storage, and 16 KB of SRAM for working memory. Its operating voltage range is listed as 1.8 V to 5.5 V, making it suitable for embedded systems using common low-voltage rails. The PG-VQFN-48-73 package provides 48 leads plus an exposed thermal-pad feature described in the package documentation, supporting compact surface-mount PCB designs where a small footprint and thermal performance are important. Infineon identifies the XMC1400 series as being optimized for motor control, power conversion, LED lighting, and human-machine interface applications. The MCU can therefore serve as the central controller in a digital power-conversion module, an industrial lighting controller, or a compact motor-control system. Its 32-bit architecture is suitable for managing multiple control functions, while the 48 MHz operating frequency provides additional timing margin for peripheral servicing and real-time control routines. The principal design consideration is that software, memory size, and peripheral configuration must be checked against the final application requirements. Firmware development should use the appropriate Infineon device support and debugger workflow, while the board design should provide clean decoupling, a stable supply source, and adequate exposed-pad thermal relief. Confirm the exact peripheral set, electrical limits, and package drawing in the manufacturer documentation before releasing a production schematic. This product page provides a consolidated view of the XMC1402Q048X0128AAXUMA1 identification, package, memory, core, and application positioning, together with practical sourcing and design guidance. It is intended to help engineers locate the correct datasheet, evaluate the device for embedded-control use, and plan a hardware design around the Infineon XMC1000 ecosystem.

RFQ संपर्क
XMC1402T038X0032AAXUMA1 - 48MHz Cortex-M0 MCU | Infineon
XMC1402T038X0032AAXUMA1

XMC1402T038X0032AAXUMA1 - 48MHz Cortex-M0 MCU | Infineon

The Infineon Technologies XMC1402T038X0032AAXUMA1 is a 32-bit ARM Cortex-M0 microcontroller with a 48 MHz core, 32 KB of Flash memory, and a 38-pin PG-TSSOP-38-9 package. Designed for low-cost embedded control, it targets industrial motor control, power conversion, LED lighting, and human-machine interface applications. Its compact package and focused analog and digital peripherals support space-constrained control systems requiring deterministic embedded processing. A microcontroller integrates a processor core, memory, peripherals, and communication interfaces on one semiconductor device. The XMC1400 family belongs to the broader embedded-control hierarchy of 32-bit ARM Cortex-M MCUs, industrial embedded controllers, and programmable semiconductor devices. The Cortex-M0 architecture supports efficient event-driven control while keeping system complexity and power requirements manageable for motor, lighting, and power-control equipment. Three headline characteristics define this device: a 48 MHz operating frequency, 32 KB of Flash memory, and a 38-pin PG-TSSOP-38-9 package. The manufacturer identifies the XMC1400 series as optimized for motor control, power conversion, LED lighting, and HMI designs. The 32-bit RISC core provides greater addressable data range and processing capability than an 8-bit controller, while the 32 KB Flash allocation provides room for application code, configuration data, and firmware updates. The XMC1402 is part of Infineon's XMC1000 microcontroller family and is positioned for industrial embedded applications. Its ARM Cortex-M0 core operates at 48 MHz according to the manufacturer product page. The PG-TSSOP-38-9 mechanical format offers 38 external connections in a surface-mount package, enabling compact control boards without requiring a large fine-pitch array package. Pin functions, peripheral assignments, electrical limits, and memory-map details should be assigned from the manufacturer datasheet and pin-description tables before PCB routing. Typical applications include low-cost brushless DC motor controllers, digitally controlled LED lighting, industrial power-conversion modules, and compact HMI control boards. In these systems, the microcontroller can coordinate sensing, control loops, communication interfaces, and protection logic. The 48 MHz core provides additional timing headroom over slower general-purpose control solutions, while the 32 KB Flash capacity supports embedded control firmware without requiring external program memory in basic designs. PCB implementation requires careful assignment of the 38 pins according to the PG-TSSOP-38-9 pinout. Keep power and ground connections short, route analog inputs away from fast-switching nodes, and place decoupling capacitors close to the supply pins. Confirm the exact peripheral mapping, alternate-function selections, oscillator requirements, and programming interface connections against the manufacturer datasheet before releasing a layout. This product page combines the manufacturer's orderable XMC1402-T038X0032-AA identification with practical selection guidance, verified package details, structured specifications, and clearly qualified drop-in alternatives. It helps engineers distinguish the 48 MHz Cortex-M0 MCU from parts with different core frequency, Flash capacity, package dimensions, or pin assignments before committing a control board to production.

RFQ संपर्क
XMC1404-F064X0128 - 48MHz ARM Cortex-M0 MCU 128KB Flash LQFP-64
XMC1404-F064X0128

XMC1404-F064X0128 - 48MHz ARM Cortex-M0 MCU 128KB Flash LQFP-64

The Infineon XMC1404-F064X0128 AA is an industrial-grade 32-bit ARM Cortex-M0 microcontroller from the XMC1000 family, delivering up to 48 MHz core performance with 128 KB of embedded flash memory in a PG-LQFP-64-6 package. The device integrates a Cortex-M0 core optimized for low-cost embedded control, 16 KB SRAM, and a rich peripheral set including CCU4/CCU8 PWM timers, POSIF for motor control, multiple USIC channels for UART/SPI/I2C, and a 12-bit ADC. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and programmable peripherals. The Cortex-M0 is the smallest ARM core, designed for deterministic real-time control in cost-sensitive applications where 8/16-bit MCUs previously dominated. The XMC1400 sits within the XMC1000 family, an industry-targeted extension of Cortex-M0 with hardware PWM and event-request units tailored for power and motion control. Key differentiating features include the CCU8 high-resolution PWM timer (150 ps resolution), HRPWMs for digital power conversion, a 12-bit 1 Msps ADC with up to 12 channels, and Infineon's ERU (Event Request Unit) for hardware event routing without CPU intervention. The device operates from 1.8 V to 5.5 V supply with 5 V-tolerant I/O on most pins, making it suitable for industrial 24 V bus-derived rails after regulation. The architecture combines Cortex-M0 simplicity with motor-control-specific peripherals, achieving deterministic interrupt latency below 25 ns. Integrated POSIF (Position Interface) supports encoder/multi-channel hall-sensor decoding directly in hardware, offloading CPU overhead in FOC motor loops. The XMC1404 family is also AEC-Q100 qualified variants available for automotive motor and lighting. Typical applications include BLDC/PMSM motor control, power conversion (PFC, LLC, solar micro-inverters), LED lighting drivers, industrial HMI panels, and low-cost sensor conditioning. The wide operating temperature range of -40 C to +125 C supports harsh industrial environments. When designing with this MCU, allocate at least 6 layer PCB stack-up for high-frequency signals, use low-ESR ceramic decoupling near each VDD pin, and leverage Infineon DAVE toolchain for code generation. Avoid routing PWM signals near ADC analog inputs to minimize switching noise coupling. This page synthesizes distributor inventory data, drop-in alternatives from the same XMC1400 family, and practical design notes beyond the manufacturer datasheet content.

RFQ संपर्क
XMC1404F064X0200AAXUMA1 - 48MHz Cortex-M0 MCU | Infineon
XMC1404F064X0200AAXUMA1

XMC1404F064X0200AAXUMA1 - 48MHz Cortex-M0 MCU | Infineon

Infineon XMC1404F064X0200AAXUMA1 is a 32-bit ARM Cortex-M0 industrial microcontroller operating at 48 MHz, with 200 KB of Flash memory, 16 KB of SRAM, and an LQFP-64 package. The device belongs to the XMC1000 family and is designed around real-time embedded control applications that include motor control, digital power conversion, LED lighting, and human-machine interfaces. A microcontroller is a programmable system-on-chip that combines a processor core, memory, digital peripherals, and interface functions on one integrated circuit. The ARM Cortex-M0 core provides a compact, low-complexity architecture for deterministic control tasks. Within the broader semiconductor hierarchy, this device is a microcontroller, embedded processor, and industrial automation IC with dedicated hardware for embedded power and motor-control systems. The XMC1404F064X0200AAXUMA1 combines a 48 MHz processing clock with 200 KB of Flash and 16 KB of SRAM. Its 64-lead LQFP package provides 64 externally accessible connection points, making it suitable for boards requiring a moderate number of general-purpose and control signals. The XMC1400 family also includes two CAN nodes, while its dedicated control peripherals support the timing and feedback requirements of real-time motor-control and power-conversion systems. The device uses the ARM Cortex-M0 instruction set and belongs to the XMC1000 family of industrial microcontrollers. Its 200 KB Flash provides on-chip program storage, while 16 KB of SRAM supports working memory, stack space, and state variables. For motor-control designs, this combination allows control firmware, parameter tables, and supervisory logic to remain local to the controller instead of depending on external program memory. Typical uses include brushless DC motor controllers, digital power converters, LED lighting systems, industrial automation equipment, and human-machine interface controllers. In these systems, the microcontroller can combine fast control-loop execution with communication and general-purpose I/O while operating from a single 10 mm by 10 mm LQFP-64 package. PCB planning should follow the pin-description and package-outline tables in the manufacturer datasheet. Pay particular attention to supply, ground, clock, reset, and debug connections because incorrect assignment can prevent programming or compromise signal integrity. Stable decoupling close to the device and a deliberate ground-return strategy are important in motor-control and power-conversion systems. This page combines the XMC1404 industrial MCU architecture, verified manufacturer and distributor product information, package and memory characteristics, and engineering guidance for motor-control, digital power conversion, LED lighting, and HMI designs. It also identifies same-footprint alternatives and distinguishes confirmed drop-in options from parts that would require software, peripheral, or package revalidation.

RFQ संपर्क
XMC1404Q048X0200AAXUMA1 - 48MHz Cortex-M0 MCU | Infineon
XMC1404Q048X0200AAXUMA1

XMC1404Q048X0200AAXUMA1 - 48MHz Cortex-M0 MCU | Infineon

The Infineon XMC1404Q048X0200AAXUMA1 is a 32-bit Arm Cortex-M0 microcontroller designed for industrial embedded control, combining a 48 MHz CPU with 200 KB of flash memory and 16 KB of SRAM in a 48-pin PG-VQFN package. It is positioned for low-cost motor-control, power-conversion, LED-lighting, and human-machine-interface applications. A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals into one device. The XMC1404 belongs to the XMC1000 family and the XMC1400 subfamily, combining the Arm Cortex-M0 processor architecture with embedded-control peripherals. This product hierarchy places it between general-purpose microcontrollers and specialized industrial controllers, providing deterministic embedded processing without requiring a larger application processor. Three headline characteristics define its core capability: a 48 MHz Arm Cortex-M0 processor, 200 KB of program flash, and 16 KB of SRAM. The 200 KB flash provides room for control code, configuration data, and application logic, while the SRAM supports working memory and real-time control variables. Its 48-pin PG-VQFN package supports dense PCB layouts and includes an exposed-pad package option for thermal management. The XMC1400 series is optimized for embedded motor-control and power-conversion workloads. Its mixed-signal and timing resources can be used to monitor control loops, operate power stages, and manage LED lighting systems. The manufacturer describes the series as suitable for industrial systems, low-cost embedded-control applications, and human-machine interfaces, providing a practical bridge between simple logic controllers and more complex Cortex-M designs. Typical implementations include three-phase motor-control boards, DC and AC power-conversion systems, programmable LED-lighting controllers, and compact industrial HMI panels. For these applications, the 48 MHz processing rate supports timely control-loop execution, while 200 KB flash can accommodate firmware, lookup tables, and communication routines without immediately requiring external memory. Board design should follow the Infineon XMC1400 datasheet for pin multiplexing, power pins, decoupling, clocking, and exposed-pad layout. Software should also follow the ordering-specific pin map: using the wrong package code can assign a peripheral signal to an incorrect physical pin even when the device family is otherwise compatible. This product page combines the manufacturer part description, XMC1400-series technical details, package information, verified drop-in candidates, comparison parameters, and practical implementation guidance. It is intended to help engineers identify the correct MCU, confirm package compatibility, and plan PCB and firmware work with fewer board respins.

RFQ संपर्क
XMC1404Q064X0200AAXUMA1 - 200KB Flash 48MHz Cortex-M0 MCU | Infineon
XMC1404Q064X0200AAXUMA1

XMC1404Q064X0200AAXUMA1 - 200KB Flash 48MHz Cortex-M0 MCU | Infineon

The Infineon XMC1404Q064X0200AAXUMA1 is an industrial-grade 32-bit microcontroller built around an ARM Cortex-M0 core running at 48 MHz, integrating 200 KB of Flash and 16 KB of SRAM, and housed in a PG-VQFN-64-6 package with exposed pad. The XMC1400 family is designed for low-cost embedded control with deterministic peripherals aimed at motor control, power conversion, LED lighting and human-machine interface (HMI) applications. The 'Q064' suffix indicates the 64-pin VQFN package option, '0200' indicates 200 KB Flash, and 'XUMA1' is the tape-and-reel ordering code. A 32-bit microcontroller (MCU) is an integrated circuit that combines a CPU, memory, and programmable peripherals on a single die. The Cortex-M0 is ARM's smallest and most cost-optimized 32-bit core, offering Thumb-2 instruction set compatibility with deterministic interrupt latency. The XMC1000 family sits below the XMC4000 (Cortex-M4F) family in Infineon's portfolio, targeting cost-sensitive real-time control where the M0's instruction efficiency outperforms legacy 8-bit/16-bit architectures. Key features of the XMC1404 include the MATH coprocessor for hardware CORDIC and divide operations, the CCU (Capture Compare Unit 4) timers with hardware PWM support, the POSIF (Position Interface) for encoder feedback, a 12-bit ADC with up to 12 Msps, and the BCCU (Brightness and Colour Control Unit) for LED lighting. The device supports operating voltages from 3.0 V to 5.5 V and ambient temperatures from -40 C to +125 C, making it suitable for industrial environments. The XMC1404 integrates Infineon's proprietary peripheral set on a 130 nm process. The MATH coprocessor offloads trigonometric and arithmetic operations from the core, enabling faster field-oriented control (FOC) loops for motor control. Deterministic interrupt response (typical 12 cycles) and tightly-coupled peripherals minimize jitter in closed-loop applications. The 200 KB Flash supports both in-application programming and read-while-write operation for firmware updates. Typical applications include BLDC/PMSM motor control (PFC plus FOC), industrial automation drives, digital switched-mode power supplies, LED lighting controllers with dimming, and HMI panels with touch or LED feedback. The peripheral combination makes XMC1404 particularly effective for cost-sensitive real-time control loops up to a few kHz. When designing with this MCU, allocate the VQFN-64 thermal pad to a continuous ground copper pour for thermal and electrical performance. Place the 12 MHz crystal or external clock as close as possible to the XTAL pins to minimize EMI susceptibility, and follow Infineon's DAVE SDK for firmware development and code generation. This page consolidates distributor pricing, drop-in same-package alternatives from the XMC1400/XMC1300 family, and practical design notes beyond the manufacturer datasheet to support BOM decisions.

RFQ संपर्क
XMC4100F64F128ABXQMA1 - 80MHz Cortex-M4 128KB MCU | Infineon
XMC4100F64F128ABXQMA1

XMC4100F64F128ABXQMA1 - 80MHz Cortex-M4 128KB MCU | Infineon

Infineon Technologies XMC4100F64F128ABXQMA1 is a 32-bit ARM Cortex-M4 microcontroller operating at 80 MHz, with 128 KB of embedded Flash memory and 20 KB of SRAM, housed in a 64-pin PG-LQFP-64-19 package. The XMC4100 belongs to the XMC4000 family and targets industrial embedded systems requiring deterministic control, communications, and general-purpose processing. An MCU is a semiconductor device that combines a processor core, embedded memory, and peripherals in one integrated circuit. The XMC4100’s ARM Cortex-M4 core implements the ARM Thumb instruction set and provides the processing foundation for an industrial control hierarchy: MCU, embedded microcontroller, real-time control processor, and industrial automation component. Its 128 KB Flash supports firmware and application code, while 20 KB SRAM provides working memory for control algorithms, data buffers, and communication stacks. The XMC4100F64F128ABXQMA1 operates from a 1.3 V or 3.3 V supply and is identified as an industrial-temperature-grade component. Its 80 MHz clock rate supports responsive digital control, while the 32-bit architecture allows efficient handling of wider data values than an 8- or 16-bit processor. The 64-pin LQFP package also exposes a broad set of digital and analog interfaces for sensors, actuators, communications links, and supervisory circuitry. The XMC4000 family combines a Cortex-M4 core with embedded control peripherals designed for industrial equipment. At 128 KB Flash and 20 KB SRAM, this device offers more program and working memory than basic compact MCUs while retaining a 64-pin package suitable for conventional leaded-board assembly. The manufacturer lists XMC4100-F64K128-BA as an industrial Cortex-M4 configuration with the same 128 KB Flash, 20 KB SRAM, and 80 MHz operating frequency. Typical applications include industrial sensor controllers, building automation modules, motor and actuator control, industrial communications equipment, data acquisition systems, and compact embedded gateways. Its 80 MHz processing capability is useful when the firmware must combine control-loop execution with serial communications, diagnostics, and local data processing rather than perform only a simple sequential task. Designers should verify the exact pin functions, peripheral mix, clock requirements, and recommended decoupling in the manufacturer datasheet before layout. The 1.3 V and 3.3 V supply notation describes supported operating conditions rather than a choice of arbitrary rail voltage. PCB planning should preserve the exposed thermal and assembly geometry of the PG-LQFP-64-19 package and route sensitive analog and communication signals away from fast-switching nodes. This page combines the confirmed XMC4000-family specifications, same-package replacement candidates, application guidance, and design considerations needed to evaluate the XMC4100F64F128ABXQMA1 before schematic capture, PCB layout, firmware development, and production sourcing.

RFQ संपर्क
XMC4100F64F128BAXQMA1 - 80MHz Cortex-M4 MCU | Infineon
XMC4100F64F128BAXQMA1

XMC4100F64F128BAXQMA1 - 80MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4100F64F128BAXQMA1 is an industrial 32-bit Arm Cortex-M4 microcontroller operating at up to 80 MHz, with 128 KB of flash memory and 20 KB of SRAM in a 64-pin PG-TQFP-64-19 package. It belongs to the XMC4000 family and combines deterministic microcontroller performance with communication and embedded-control capabilities for motor-drive, industrial automation, and networked embedded systems. An Arm Cortex-M4 microcontroller is a 32-bit embedded processor designed for real-time control systems. Its instruction set, integrated memory, and dedicated peripherals place it within the hierarchy of embedded processor, microcontroller, and industrial semiconductor. The XMC4000 family targets applications that require more deterministic control than a general-purpose application processor while retaining a compact, integrated design. The device provides 128 KB of flash for program storage, 20 KB of SRAM for working data, and a maximum operating frequency of 80 MHz. A 64-pin TQFP package provides a practical surface-mount solution for control boards with moderate pin requirements. The ordering code also identifies a 3.3 V device configuration and an exposed-pad package, allowing compact PCB construction without relying on a large BGA assembly. The XMC4100 is positioned for embedded motor control, motion control, industrial communication, and connected industrial equipment. Its CAN and LIN support makes it suitable for distributed control networks where a controller must exchange diagnostic, status, or command data with remote nodes. The 80 MHz Cortex-M4 core provides computational headroom for control loops and supervisory logic while retaining deterministic peripheral-driven operation. A typical motor-drive design uses the microcontroller to execute current, speed, or position-control algorithms, operate communication interfaces, and supervise external sensors and actuators. In industrial automation equipment, the same device can coordinate analog and digital I/O, perform protocol handling, and implement safe state transitions through firmware. In building and industrial control systems, CAN or LIN connectivity helps reduce wiring complexity between a central controller and distributed modules. PCB design should treat the exposed thermal pad as both a thermal path and a low-impedance ground connection. Follow the manufacturer land-pattern and solder-reflow requirements, place decoupling capacitors close to their supply pins, and preserve a continuous ground plane under the package. Confirm the exact peripheral availability, pin multiplexing, voltage limits, and clock-tree configuration in the manufacturer datasheet before finalizing the schematic. This product page combines the manufacturer’s device description with practical package, application, comparison, and sourcing guidance. The comparison focuses on same-family alternatives that can support a controlled redesign, while the design notes emphasize exposed-pad layout, decoupling, firmware portability, and qualification checks for production use.

RFQ संपर्क
XMC4100F64K128ABXQSA1 - 80MHz Cortex-M4 MCU | Infineon
XMC4100F64K128ABXQSA1

XMC4100F64K128ABXQSA1 - 80MHz Cortex-M4 MCU | Infineon

The Infineon XMC4100F64K128ABXQSA1 is a 32-bit Arm Cortex-M4 microcontroller operating at 80 MHz, with 128 KB of flash memory, 20 KB of SRAM, and a 64-pin LQFP exposed-pad package. It belongs to the XMC4000 industrial microcontroller family and supports the XMC4000 peripheral set for embedded control, communications, and real-time applications. A microcontroller is a programmable system-on-chip that combines a processor core, nonvolatile program memory, volatile data memory, peripherals, and interface control logic. The Cortex-M4 architecture provides a 32-bit processing platform with deterministic interrupt handling, while the XMC integration adds industrial-oriented peripherals and communication interfaces. The XMC4100F64K128ABXQSA1 therefore occupies the microcontroller -> embedded processor -> industrial control IC hierarchy. The principal device parameters are an 80 MHz Arm Cortex-M4 core, 128 KB of flash, 20 KB of SRAM, and a 3.3 V operating supply identified for this ordering code. Its documented connectivity includes CAN, I2C, LIN, SPI, UART/USART, and USB interfaces. These interfaces make the device suitable for distributed industrial controllers, motor-control gateways, and connected sensor systems requiring several communications protocols. The XMC4000 platform combines a 32-bit core with hardware peripherals for communication and control. Its 128 KB flash provides room for an embedded application, boot logic, and configuration data, while 20 KB of SRAM supports working memory and peripheral buffers. The 80 MHz clock rate allows the processor to service multiple interrupts and communication tasks, although final performance depends on peripheral configuration, memory latency, and the selected toolchain and operating system. Typical uses include industrial communication controllers, CAN-to-serial gateways, LIN-based body and factory nodes, USB-to-fieldbus adapters, sensor-hub controllers, and compact motor-control modules. A 64-pin LQFP exposed-pad package also provides a conventional PCB footprint and a thermal pad for distributing heat through the board structure. Designers should review the manufacturer pin-description table and electrical characteristics before assigning analog, communications, debug, clock, and power pins. Decoupling, exposed-pad soldering, clock stability, unused-pin treatment, and startup configuration must follow the XMC4100/XMC4200 datasheet and reference manual. This product page combines the exact ordering-code characteristics with an application-focused selection guide, interface recommendations, comparison parameters, and practical PCB guidance. These engineering-oriented details help teams evaluate the XMC4100F64K128ABXQSA1 without reducing the selection decision to processor speed and flash memory alone.

RFQ संपर्क
XMC4100F64K128BAXQMA1 - 80MHz Cortex-M4 MCU | Infineon
XMC4100F64K128BAXQMA1

XMC4100F64K128BAXQMA1 - 80MHz Cortex-M4 MCU | Infineon

The Infineon Technologies XMC4100F64K128BAXQMA1 is an industrial 32-bit ARM Cortex-M4 microcontroller with an 80 MHz operating frequency, 128 KB of flash memory, and 20 KB of SRAM in a 64-pin PG-LQFP-19 package. It combines deterministic control capability with integrated DMA, I2S, LED control, power-on reset, PWM generation, and watchdog functions, making it suitable for industrial motor-control, communications, and embedded automation systems. A microcontroller is a programmable system-on-chip that integrates a processor core, nonvolatile program memory, volatile data memory, peripherals, and interrupt control into one device. The XMC4100 belongs to Infineon's XMC4000 family, where the ARM Cortex-M4 core is used in the hierarchy Cortex-M4 processor → 32-bit microcontroller → embedded microcontroller → industrial semiconductor. Its combination of 128 KB flash, 20 KB SRAM, and 80 MHz execution speed provides a practical balance between firmware capacity, real-time processing, and package size. Key features include the 80 MHz ARM Cortex-M4 processor core, 128 KB flash organized as 128K × 8, and 20 KB SRAM. On-chip resources include DMA for efficient data movement, I2S for digital audio data transfer, PWM generation for motor or power-converter control, an LED-control peripheral, a power-on reset function, and a watchdog timer. These integrated blocks reduce external component requirements and allow control software to service multiple deterministic tasks. The 64-pin LQFP package provides conventional leaded soldering access while supporting a board footprint identified as PG-LQFP-64-19. The industrial XMC4100-F64K128-BA device variant is explicitly presented by Infineon as an industrial ARM Cortex-M4 microcontroller. Its 80 MHz core is suitable for sampled control loops and protocol handling, while DMA reduces processor intervention when transferring data between memory and serial peripherals. Typical uses include industrial motor controllers, distributed automation nodes, digital audio interfaces, LED control systems, and embedded communications equipment. For motor-control designs, the PWM and DMA resources can support deterministic actuator timing, while the I2S interface can serve synchronous digital-audio paths. The 128 KB flash region accommodates control code, configuration tables, and field-update routines, while 20 KB SRAM supports working state and communication buffers. When designing a board, validate the exact package pin mapping, exposed-pad connection, decoupling requirements, clock configuration, and peripheral instance assignments against the manufacturer datasheet. Firmware should include watchdog servicing, controlled reset behavior, and graceful handling of communications loss. Production programming and lifecycle decisions should also use the ordering code rather than assuming that every XMC4100 package variant is electrically or pin compatible. This product page consolidates verified distributor availability, manufacturer specifications, package information, and honest drop-in replacement findings. It distinguishes verified electrical identity from unverified peripheral deltas, helping engineers review availability, procurement, firmware compatibility, and PCB reuse without relying on speculative substitutions.

RFQ संपर्क
XMC4100Q48F128ABXUMA1 - 80MHz Cortex-M4 MCU | Infineon
XMC4100Q48F128ABXUMA1

XMC4100Q48F128ABXUMA1 - 80MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4100Q48F128ABXUMA1 is a 32-bit ARM Cortex-M4 microcontroller operating at up to 80 MHz, with 128 KB of Flash memory organized as 128K x 8 and supplied in a 48-pin PG-VQFN-53 surface-mount package with an exposed pad. It belongs to the Infineon XMC4000 family and is designed for embedded industrial control applications requiring deterministic real-time performance, compact packaging, and integrated microcontroller resources. An ARM Cortex-M4 microcontroller is a reduced-instruction-set processor within the broader 32-bit embedded MCU category. It combines a processor core, Flash program memory, SRAM, communications peripherals, timers, and GPIO in one device. The XMC4000 family extends this architecture into industrial control systems where compact embedded processing, real-time interrupt handling, and deterministic peripheral interfaces are central design requirements. Key characteristics of the XMC4100Q48F128ABXUMA1 include an 80 MHz maximum clock, 128 KB of 128K x 8 Flash, a 32-bit architecture, and a 3.3 V supply designation. The 48-VFQFN package with exposed pad supports compact surface-mount construction and provides a central thermal and electrical land area. Tape-and-reel packaging is identified for this ordering configuration, supporting automated production and standard component handling. The XMC4000 architecture is positioned between basic Cortex-M microcontrollers and more complex application processors. It provides dedicated real-time capabilities suited to industrial automation, motor-control, communications, and embedded control systems. Its 80 MHz operating point supports timely peripheral servicing and control-loop execution, while the integrated Flash supports embedded firmware, configuration data, and application code within a single package. Typical uses include industrial automation controllers, communication equipment, motor-control systems, data acquisition modules, and compact embedded control platforms. The Cortex-M4 software ecosystem supports development with embedded IDEs, debug probes, compilers, and configuration tools designed for ARM-based microcontrollers. Firmware architecture should be checked against the selected peripherals, memory map, pin multiplexing, and device errata before production release. A key design consideration is thermal management around the exposed pad. Follow the Infineon land-pattern, solder, and exposed-pad requirements in the XMC4100/XMC4200 datasheet, and connect the thermal land to the appropriate ground plane and copper area. Decoupling, signal routing, and unused-pin treatment must also follow the manufacturer’s board-level guidance to preserve signal integrity and reliable operation. This page combines the exact ordering and package information, technical specifications, practical application guidance, comparison data, and engineering design notes for the XMC4100Q48F128ABXUMA1. It is intended to help hardware and firmware engineers assess the device, plan its implementation, and identify same-family alternatives without overlooking package, memory, or peripheral differences.

RFQ संपर्क