उत्पाद (46,000+)

XC3S400-5PQ208C - 400K Gate Spartan-3 FPGA | Xilinx
XC3S400-5PQ208C

XC3S400-5PQ208C - 400K Gate Spartan-3 FPGA | Xilinx

The Xilinx XC3S400-5PQ208C is a Spartan-3 field-programmable gate array with 400,000 system gates, 8,064 configurable logic cells, and 141 I/O sites in a 208-pin PQFP package. The device operates from a 1.2 V core supply and is associated with a 725 MHz device speed rating, making it suitable for embedded logic, control, communications, and general-purpose programmable systems. Its commercial-temperature designation indicates operation from 0°C to 85°C according to the available distributor specifications. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic can be configured after fabrication. FPGAs sit above programmable logic devices in the hardware hierarchy and combine configurable logic blocks, programmable interconnect, input/output blocks, and embedded memory resources. The Spartan-3 architecture uses a 90 nm process and provides a substantial logic capacity while using a conventional 208-pin PQFP surface-mount package, avoiding the larger ball-grid-array footprints used by many comparable devices. The XC3S400-5PQ208C provides 8,064 logic cells, 400,000 system gates, and 141 I/O. The -5 suffix identifies the device speed grade, while PQ208 identifies the 208-pin PQFP package. The available component listings also identify the device as lead-free and classify the package as 208-BFQFP. Exact core-voltage tolerances, configuration-memory organization, I/O standards, and recommended decoupling values were not supplied in the verified data and therefore are not inferred here. Typical applications include industrial control and automation, embedded instrumentation, communications gateways, digital signal-processing front ends, and general-purpose logic consolidation. The 141 I/O sites allow the FPGA to interface with parallel data buses, control signals, clocks, and external memory, while the 8,064 logic cells support state machines, protocol handling, data formatting, and arithmetic logic. Designers should assess clock-rate requirements carefully because a faster internal fabric does not guarantee that an external interface meets its specified timing. For a new PCB, the key design consideration is package-level planning. The 208-pin PQFP footprint requires adequate escape routing, exposed via access, and careful decoupling around the 1.2 V supply. A finished Spartan-3 design must also include a supported configuration path and a valid bitstream generated for the exact device, speed grade, and package identifier. Legacy software support should be verified before committing the part to a long-lived production program. This page consolidates verified distributor specifications, same-package replacement information, package and sourcing constraints, and engineering selection guidance. It also distinguishes directly compatible PQ208 alternatives from FG320 options that require a different PCB footprint, helping prevent a functionally similar FPGA from being mistaken for a true drop-in replacement.

RFQ संपर्क
XC3S400-5TQ144C - 400K Gate Spartan-3 FPGA | Xilinx
XC3S400-5TQ144C

XC3S400-5TQ144C - 400K Gate Spartan-3 FPGA | Xilinx

The Xilinx XC3S400-5TQ144C is a Spartan-3 field-programmable gate array with 400,000 system gates, a 1.2 V supply, and a 144-pin LQFP package. It is designed for programmable-logic applications requiring a balance of logic capacity, embedded block RAM, digital I/O, and device availability in a compact surface-mount package. The commercial temperature designation indicates operation from 0°C to +85°C according to the verified distributor specifications. The “-5” suffix identifies the device speed grade, while “TQ144C” identifies the 144-lead package and commercial grade. As an FPGA, the XC3S400-5TQ144C combines configurable logic blocks, programmable interconnect, block RAM, dedicated input/output resources, and embedded processor capabilities in a single semiconductor device. It belongs to the hierarchy FPGA > programmable logic device > digital semiconductor. Unlike a fixed-function application-specific integrated circuit, its internal functions are established through a configuration bitstream, allowing one device to implement multiple control, interface, arithmetic, and signal-processing functions. The verified distributor information identifies the component as a 400,000-system-gate Spartan-3 FPGA operating at 1.2 V in a 144-LQFP package. Its 144-pin surface-mount format is suitable for compact industrial, communications, control, and embedded-processing systems where larger BGA packages would be impractical. The active-low configuration pins, dedicated configuration resources, clock-management capabilities, and distributed and block RAM allow designers to implement parallel data paths and stateful control logic without combining numerous discrete devices. System timing should be evaluated against the -5 speed grade, the selected I/O standard, the external clock architecture, and the specific Spartan-3 family documentation. An LCSC result lists the XC3S400-5TQ144C as in stock with a price from $17.8523, making current supply and price useful differentiators. This page combines verified distributor specifications, price information, package details, practical design guidance, and strictly drop-in replacement candidates. It also separates confirmed values from engineering data that still requires manufacturer-documentation verification.

RFQ संपर्क
XC3S4000-4FG676C - 4M Gate Spartan-3 FPGA, 676-Ball FBGA | AMD
XC3S4000-4FG676C

XC3S4000-4FG676C - 4M Gate Spartan-3 FPGA, 676-Ball FBGA | AMD

The AMD Xilinx XC3S4000-4FG676C is a Spartan-3 family field programmable gate array built on 90 nm CMOS with 4,000,000 system gates, 62,208 logic cells, 489 user I/O and a 1.2 V core supply, supplied in a 676-ball fine-pitch BGA (FGG676) package. The -4 suffix designates the 630 MHz mid-speed performance grade of the Spartan-3 family, while the trailing C indicates the commercial operating-temperature grade. A field programmable gate array, or FPGA, is a programmable logic device whose internal array of configurable logic blocks, programmable interconnect and I/O blocks is set from a bitstream rather than mask programming. An FPGA sits above fixed logic and above mask-programmable ASICs in the design hierarchy: it is a semiconductor, and within the logic family it belongs to the CPLD/FPGA class of reconfigurable digital logic. Because the configuration is loaded at power-up, an FPGA allows field upgrades, prototyping and hardware revision without respinning silicon, which is why the device is chosen over an equivalent mask ASIC whenever time-to-market outweighs unit cost. Key features of this device include 62,208 configurable logic cells spread over 19,824 slices, a large number of dedicated 18 Kbit block RAM tiles, dedicated 18x18 multiplier blocks for DSP work, and 489 single-ended I/O that can be configured for LVCMOS, LVTTL, HSTL, SSTL and other standards. The 676-ball FBGA package exposes 489 I/O plus power, ground and configuration pins, keeping the total pin count within what fine-pitch BGA assembly can support. Spartan-3 devices use a column-based architecture in which each slice contains four 4-input LUTs and flip-flops shared with local routing, and in which dedicated vertical and horizontal interconnect channels route signals between slices. Because the fabric is only 90 nm, this family delivers a very favorable cost per logic cell for designs that need tens of thousands of gates, and it supports dedicated block RAM and DSP resources that keep most soft multipliers and FIFOs out of the general fabric. Configuration loading is handled through the standard serial or parallel configuration pins, and the device operates from a single 1.2 V core rail with separate adjustable I/O rails. Typical applications include industrial control and data acquisition equipment, video and image processing pipelines, telecom line cards, networking and protocol bridges, DSP and instrumentation, and embedded systems that need deterministic parallel logic with large on-chip memory. The 4M-gate density makes the XC3S4000-4FG676C a common fit for multi-channel protocol converters and test-equipment logic sections. When laying out a board around this device, treat the FGG676 land pattern and its power distribution network as the primary risk. The 1.2 V core rail and the I/O rails each need their own decoupling network, and every ground ball must be connected to a solid plane so that simultaneous switching in the fabric does not corrupt adjacent signal integrity. Use the pinout table and package drawing in the manufacturer datasheet when assigning ball locations, and confirm the power-up sequencing requirements for the configuration pins before committing the schematic.

RFQ संपर्क
XC3S4000-4FG676I - 4M Gate Spartan-3 FPGA, 676-BGA | AMD
XC3S4000-4FG676I

XC3S4000-4FG676I - 4M Gate Spartan-3 FPGA, 676-BGA | AMD

The AMD Xilinx XC3S4000-4FG676I is a Spartan-3 field-programmable gate array with 4 million system-gate equivalents, 62,208 logic cells, 489 I/O lines, and 1,769,472 RAM bits in a 676-ball fine-pitch BGA package. It is designed for cost-sensitive, high-volume embedded systems requiring substantial programmable logic in a single device. A field-programmable gate array is a digital integrated circuit whose logic, interconnect, and configurable I/O are programmed after manufacture. Within the product hierarchy, an FPGA belongs to programmable logic devices and is broader than a fixed-function application-specific integrated circuit. The Spartan-3 architecture combines configurable logic blocks, distributed and block RAM, dedicated multipliers, and programmable I/O so engineers can implement parallel data processing, control, communications, and interface functions on one device. The XC3S4000 part of the Spartan-3 family provides 4 million system-gate equivalents, while the -4 suffix identifies its performance grade. The device provides 62,208 logic cells, 489 I/O lines, and 1,769,472 bits of RAM. Its 676-BGA package supports a high pin count, allowing extensive parallel connectivity in compact industrial, communications, instrumentation, and embedded-control equipment. The Spartan-3 architecture is organized around configurable logic blocks connected by programmable routing resources. Dedicated block RAM and arithmetic resources allow designers to place buffering, packet handling, filtering, and fixed-point processing close to the logic that consumes the data. This architecture is valuable when system throughput, parallel processing, or flexible post-deployment updates matter more than the absolute operating frequency of a large application-specific processor. Typical uses include industrial control systems, network-interface controllers, video and image-processing pipelines, communications equipment, test and measurement instruments, and embedded control platforms. The large I/O count also supports buses, memory interfaces, high-speed acquisition channels, and external peripheral connectivity when board constraints allow the associated signal-integrity engineering. Design planning must account for the BGA assembly process, power delivery across many supply balls, decoupling, thermal performance, and high-speed routing. Differential and sensitive interfaces should use controlled-length geometry and reference planes, while configuration, JTAG, decoupling, and clock circuitry should follow the manufacturer’s Spartan-3 design guidance. Verify every selected pin, voltage requirement, speed limit, and package dimension against the official device documentation before schematic release. This product record combines the device identity, package information, sourcing fields, technical specifications, drop-in candidates, application guidance, and design notes needed for initial engineering evaluation. The 676-ball footprint requires deliberate PCB layout and assembly planning, so migration decisions should be based on confirmed pin compatibility rather than family name or gate-count similarity alone.

RFQ संपर्क
XC3S4000-4FG900C - 4M Gate Spartan-3 FPGA | AMD
XC3S4000-4FG900C

XC3S4000-4FG900C - 4M Gate Spartan-3 FPGA | AMD

The AMD Xilinx XC3S4000-4FG900C is a Spartan-3 field-programmable gate array with 4,000,000 system gates, 62,208 logic cells, 6,912 configurable logic blocks, 1,769,472 RAM bits, and 633 user I/O in a 900-FBGA package. It operates from a 1.14 V to 1.26 V core supply and is specified for a 0 °C to 85 °C commercial temperature range. A field-programmable gate array, or FPGA, is a programmable digital integrated circuit whose logic, memory, and I/O resources can be configured after manufacture. Within the semiconductor hierarchy, an FPGA is a configurable logic device used for parallel processing, interface bridging, signal generation, data acquisition, and embedded control. The Spartan-3 family targets cost-sensitive designs requiring more logic density than small programmable logic devices while retaining a relatively simple implementation flow. Key resources include 62,208 logic cells distributed across 6,912 CLBs or LABs, together with 1,769,472 RAM bits for buffers, lookup tables, or distributed data storage. The device provides 633 user I/O, supporting interfaces to external memory, transceivers, converters, processors, and network equipment. Its 1.2 V-class core operation reduces power relative to many older FPGA generations, while the -4 speed designation identifies its performance grade. The 900-FBGA package concentrates a large amount of programmable logic and I/O into a compact surface-mount footprint. Fine-pitch ball-grid construction makes accurate PCB layout, via planning, assembly-profile inspection, and power distribution essential. Unlike a microcontroller, the FPGA executes hardware-defined parallel datapaths after configuration rather than relying primarily on sequential software execution. Typical uses include industrial control, communications infrastructure, video and image processing, test equipment, storage controllers, networking, and embedded signal-processing systems. The large LUT and RAM inventory is particularly useful for parallel filters, protocol engines, bus bridges, and high-speed data paths where multiple operations must execute concurrently. Before finalizing a board, verify the 900-ball land pattern against the manufacturer package drawing, provide clean core and I/O supplies, and confirm the selected Xilinx synthesis, implementation, and programming tools support the Spartan-3 device. Because this is a fine-pitch BGA package, assembly yield, solder-mask definition, X-ray inspection, and thermal design should be reviewed with the PCB fabricator. This page combines the published device resources, package characteristics, operating limits, sourcing path, replacement options, and practical implementation considerations in one engineering-focused reference for FPGA design and procurement teams.

RFQ संपर्क
XC3S4000-4FG900I - 4M-Gate Spartan-3 FPGA | AMD | 900-BBGA
XC3S4000-4FG900I

XC3S4000-4FG900I - 4M-Gate Spartan-3 FPGA | AMD | 900-BBGA

The AMD/Xilinx XC3S4000-4FG900I is a Spartan-3 field-programmable gate array with 4,000,000 system gates, 62,208 logic elements, 633 user I/O, and a 900-ball BGA package. It uses 1.2 V FPGA technology, operates at the -4 speed grade, and is specified for industrial-temperature applications. A Spartan-3 FPGA is a programmable digital semiconductor used to implement logic, control, signal processing, communication, and interface functions in a single configurable device. Its architecture combines configurable logic blocks, dedicated RAM, programmable input/output blocks, digital clock managers, and dedicated multipliers. Within the product hierarchy, it is an FPGA, a programmable logic device, and a semiconductor used instead of a large combination of fixed-function logic ICs. The device provides 4,000,000 system gates and 62,208 logic elements, making it suitable for medium-complexity embedded systems. Its 633 I/O sites support communication interfaces, memory connections, control buses, and external data paths. The -4 speed designation identifies its performance grade, while the 1.2 V technology node supports lower-voltage logic implementations than older generations of programmable logic. The 900-BBGA package provides a high connection count for designs requiring substantial external connectivity. Its large thermal and routing footprint differs from the smaller XC3S400-4FT256I, making a mechanical and pinout comparison essential before considering any migration. Configuration data, design constraints, and board-level power requirements must be reviewed rather than inferred from the family name alone. Typical uses include industrial control, instrumentation, embedded communications, data acquisition, test equipment, and signal-processing systems. The Spartan-3 architecture can connect processors and peripherals through programmable logic, implement protocol bridges, and consolidate functions that would otherwise require multiple configurable or fixed-function devices. Power and layout planning are critical because the 900-BBGA device has many power, ground, configuration, and I/O connections. Follow the pin-description table and recommended decoupling guidance in the DS099 family datasheet. Verify the exact pinout, allowable voltage ranges, clock requirements, and configuration method before releasing a PCB or selecting a replacement. This product record combines the device identity, published resource counts, package details, same-footprint family options, commercial sourcing guidance, and design checks into an engineer-oriented reference. The comparison table separates verified differences from fields requiring confirmation, helping designers evaluate the XC3S4000-4FG900I without assuming that another Spartan-3 device is automatically interchangeable.

RFQ संपर्क
XC3S4000-5FG676C - 4M-Gate Spartan-3 FPGA | AMD Xilinx
XC3S4000-5FG676C

XC3S4000-5FG676C - 4M-Gate Spartan-3 FPGA | AMD Xilinx

AMD Xilinx XC3S4000-5FG676C is a Spartan-3 field-programmable gate array with 4,000,000 system gates, 489 I/O, and a 1.2 V supply in a 676-ball BGA package. The -5 speed grade supports designs requiring more timing margin than the -4 grade, while the commercial C temperature designation targets an operating range of 0°C to 85°C. A field-programmable gate array is a semiconductor whose logic fabric, programmable interconnect, and input/output resources are configured after manufacture. The Spartan-3 FPGA family belongs to the broader FPGA and programmable-logic hierarchy, allowing engineers to implement parallel data processing, control logic, interface bridging, and embedded systems in one reconfigurable device instead of combining multiple fixed-function components. The XC3S4000-5FG676C combines a 4-million-system-gate device with 489 I/O in a large 676-BGA package. Its 1.2 V core supply is characteristic of a high-density FPGA that separates core and I/O supply requirements. The -5 speed grade, commercial temperature marking, lead-free package designation, and legacy Spartan-3 architecture make the device most relevant to established designs that retain an existing board, bitstream, and software toolchain. The large I/O count provides substantial connectivity for memory interfaces, high-speed parallel buses, data converters, and external control peripherals. Because the package exposes many balls, power delivery and signal-integrity design are especially important. Designers should follow the manufacturer's decoupling, printed-circuit-board layout, and thermal guidance while confirming that the selected board pattern matches the exact 676-ball package. Typical uses include industrial automation, communications infrastructure, video and image processing, test equipment, embedded control, and legacy digital signal-processing platforms. The device is appropriate when existing Spartan-3 intellectual property, firmware, and tool-flow compatibility are more valuable than selecting a newer FPGA family. Before migration, verify timing closure, I/O voltage compatibility, memory-interface behavior, configuration requirements, and thermal performance. A different speed grade or temperature grade may fit the same family, but it is not automatically a drop-in replacement for a production design without engineering review and timing revalidation. This product page organizes the device identity, package characteristics, drop-in migration options, application guidance, comparison parameters, and design cautions. It also highlights where speed-grade and temperature-grade differences matter, helping engineering teams distinguish a mechanically compatible substitution from a functionally validated replacement.

RFQ संपर्क
XC3S4000-5FG900C - 4M Gate Spartan-3 FPGA | AMD Xilinx
XC3S4000-5FG900C

XC3S4000-5FG900C - 4M Gate Spartan-3 FPGA | AMD Xilinx

AMD Xilinx XC3S4000-5FG900C is a Spartan-3 field-programmable gate array with 4 million system gates, 62,208 logic cells, and up to 633 I/O, operating from a 1.2 V core supply in a 900-pin FBGA package. The XC3S4000-5FG900C combines a 90 nm CMOS process, a commercial temperature grade, and a speed grade of 5 for designs requiring substantial programmable logic in a single integrated circuit. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic is configured after fabrication. An FPGA belongs to the programmable-logic hierarchy, combining configurable logic blocks, programmable I/O, embedded memory resources, and clock-management circuitry. This implementation density allows one device to replace many interconnected discrete logic devices while preserving the flexibility to update a design through its configuration interface. The principal benefits of the XC3S4000-5FG900C are its 4 million-system-gate capacity, 62,208 logic cells, 633 I/O, and 725 MHz stated device performance. Its 1.2 V core supply suits modern low-voltage digital systems, while the 900-pin FBGA exposes a large number of user I/O for high-speed parallel interfaces, memory interfaces, control logic, and multi-channel data acquisition. Technically, the device uses 90 nm CMOS fabrication and belongs to the Spartan-3 FPGA family. The speed-grade designation identifies the device performance class, while the final C suffix identifies the commercial-grade ordering option. A large-ball-grid-array package supports dense PCB routing but requires careful escape routing, power-plane design, thermal management, and assembly-process control because direct inspection of hidden board connections is difficult after soldering. Typical applications include industrial control systems, communications infrastructure, instrumentation, video processing, embedded test equipment, and high-density digital interfaces. The large I/O count is especially useful when a design must connect multiple converters, memory devices, transceivers, clocks, and external control logic while maintaining predictable timing across the FPGA fabric. A key design consideration is that the 900-pin package demands careful PCB stack-up and power planning. Follow the manufacturer's pinout, differential-pair rules, decoupling recommendations, and exposed thermal strategy exactly; incorrect ball assignment or return-path discontinuities can prevent reliable configuration even when the logic design itself is correct. This product record combines the exact ordering code, core architecture, resource information, package details, temperature grade, and published device figures with procurement-focused comparisons. It also identifies same-footprint Spartan-3 options for speed-grade or temperature-grade changes while clearly distinguishing engineering fit from a guaranteed drop-in substitution.

RFQ संपर्क
XC3S400A-4FGG400C - 400K Gate Spartan-3A FPGA | AMD
XC3S400A-4FGG400C

XC3S400A-4FGG400C - 400K Gate Spartan-3A FPGA | AMD

The Advanced Micro Devices XC3S400A-4FGG400C is a Spartan-3A field-programmable gate array with 400,000 system gates, 8,064 configurable logic blocks, 311 I/O, and a maximum clock frequency of 667 MHz, housed in a 400-ball FBGA package. It uses 90 nm CMOS fabrication technology and a 1.2 V core supply, making it a cost-sensitive FPGA platform for moderate-density embedded logic designs. An FPGA is a semiconductor whose internal digital circuits are configured after manufacture. A field-programmable gate array belongs to the programmable-logic hierarchy: FPGA → programmable logic device → digital semiconductor. Unlike a fixed-function microcontroller, an FPGA can implement parallel data paths, protocol bridges, control logic, and signal processing in one device while retaining reprogrammability for design revisions or field updates. The Spartan-3A architecture combines 8,064 logic cells with 311 I/O in a compact 400-ball FBGA package. Its -4 speed designation identifies the performance grade, while the G package code identifies the lead-free 400-ball option. The device provides substantially more parallel I/O than typical low-pin-count microcontrollers, making it useful when several buses, converters, counters, or acquisition channels must operate concurrently. The XC3S400A family was created for high-volume, cost-sensitive systems. A 400K-gate device can consolidate control logic, interface translation, and limited parallel processing without requiring a larger FPGA. Its 1.2 V core architecture simplifies power partitioning when the board also uses 3.3 V I/O, although board-level voltage compatibility must be evaluated using the family datasheet rather than assumed from the package designation. Typical uses include industrial automation, motor and motion control, programmable logic controllers, protocol conversion, embedded test equipment, communications interfaces, and data-acquisition control. The large I/O count is especially useful for parallel ADC and DAC control, industrial data acquisition, and board-level interconnect logic. A high pin count also makes careful escape routing and layer planning essential. PCB implementation should preserve short configuration and clock paths, provide clean power planes for the 1.2 V core, and account for the 400-ball land pattern. Designers should also use the AMD Spartan-3A family pinout and configuration guidance to assign dedicated configuration pins and implement a reliable startup and JTAG arrangement. This product page combines the exact device identity, package, logic-capacity information, replacement analysis, comparison data, and implementation guidance needed to evaluate the XC3S400A-4FGG400C for legacy, industrial, and cost-sensitive programmable-logic designs.

RFQ संपर्क
XC3S400A-4FT256I - 400K Gate Spartan-3A FPGA | AMD
XC3S400A-4FT256I

XC3S400A-4FT256I - 400K Gate Spartan-3A FPGA | AMD

The AMD/Xilinx XC3S400A-4FT256I is a Spartan-3A field-programmable gate array with approximately 400,000 system gates, 8,064 logic elements, 368,640 RAM bits, and 195 user I/Os in a 256-FTBGA package. The -4 speed grade supports demanding control and datapath designs, while the industrial temperature designation supports operation across extended industrial temperature conditions. A field-programmable gate array is a programmable-logic semiconductor in which configurable logic blocks, memory, and I/O resources are interconnected through a user-programmed bitstream. Spartan-3A devices belong to the FPGA family within the broader programmable-logic and semiconductor hierarchy. They combine programmable digital logic with block RAM and dedicated multiplier resources for embedded control, signal processing, communications, and industrial equipment. The XC3S400A combines 8,064 logic elements with 368,640 RAM bits and 195 user I/Os, providing a balanced resource mix for protocol bridges, motor-control systems, data acquisition, industrial controllers, and general-purpose embedded logic. Its 256-FTBGA package uses fine-pitch solder balls and requires careful PCB layout, thermal analysis, and assembly process control. The device is identified by the Spartan-3A family designation, the XC3S400A device variant, the -4 speed grade, the FT256 package code, and the I industrial temperature suffix. The FTG256 ordering variant shown in the search results refers to the same 256-ball package family and provides a useful nomenclature cross-reference. Configuration and programming requirements should be checked against the manufacturer datasheet and toolchain documentation. Typical applications include industrial automation, programmable logic controllers, motion and motor control, communications infrastructure, instrumentation, test equipment, and embedded control platforms. The relatively high I/O count supports parallel interfaces, while the available logic and block RAM allow parallel datapaths and buffering. PCB implementation should preserve the FT256 land pattern, follow the manufacturer ball-grid-array assembly guidelines, provide clean power and ground distribution, and account for the thermal requirements of a fine-pitch BGA. Before replacing an existing FPGA, verify bitstream compatibility, configuration pins, I/O standards, speed grade, and industrial-temperature requirements. This product page organizes the XC3S400A-4FT256I specifications, sourcing information, same-package alternatives, application guidance, and practical design notes so engineers can evaluate the device for industrial embedded-logic designs efficiently.

RFQ संपर्क
XC3S400A-4FTG256C - Spartan-3A FPGA, 400K Gates, 256-FTBGA | AMD
XC3S400A-4FTG256C

XC3S400A-4FTG256C - Spartan-3A FPGA, 400K Gates, 256-FTBGA | AMD

The AMD (Xilinx) XC3S400A-4FTG256C is a Spartan-3A Field Programmable Gate Array (FPGA) with 400,000 system gates, 8,064 logic cells, and 195 user I/Os housed in a 256-ball Fine-Pitch Thin Ball Grid Array (FTBGA) measuring 17 × 17 mm. Built on a 90 nm CMOS process, the part operates across 0°C to +85°C commercial temperature range and supports up to 770 MHz internal clock performance per the Spartan-3A family datasheet. A Field Programmable Gate Array (FPGA) is a type of programmable logic device (semiconductor IC) that lets engineers configure digital logic, memory blocks, and I/O behavior after manufacture. Within the broader taxonomy, the Spartan-3A sits under FPGA -> programmable logic -> logic ICs -> integrated circuits -> semiconductor. FPGAs like the Spartan-3A family are used as flexible hardware platforms that replace large clusters of discrete glue logic, custom ASICs, and processor peripherals, enabling rapid design iteration without a fabrication spin. Key differentiating features of the XC3S400A include 368,640 bits of embedded Block RAM distributed across 20 dedicated blocks (each 18 Kbit), 4 dedicated silicon hardware multipliers (18 × 18-bit signed), 4 Digital Clock Managers (DCMs) for clock conditioning, and integrated configuration support for SPI, BPI, and JTAG modes. The 256-FTBGA package offers high board-density and a low-profile mounting footprint suitable for portable and embedded products, while the commercial speed/grade designation ("-4") reflects the timing/voltage balance selected for general-purpose logic systems. Architecturally, the Spartan-3A uses a structured ASIC-style fabric of Configurable Logic Blocks (CLBs), a hierarchical routing network, and a hardened set of I/O standards including LVCMOS, LVTTL, LVDS, and HSTL. The four silicon multipliers deliver deterministic DSP performance independent of slice utilization, while the four DCMs provide frequency synthesis, phase shifting, and jitter filtering on a per-clock-domain basis. Typical applications for the XC3S400A-4FTG256C include industrial control and factory automation backplanes, video/image processing front-ends, low-density DSP pipelines, embedded display controllers, automotive infotainment prototyping, communications glue logic, and legacy parallel-interface bridges between microcontrollers and high-speed peripherals. Its combination of moderate logic density and ample Block RAM makes it a strong fit for cost-sensitive designs that would otherwise require several smaller FPGAs. When designing with the 17 × 17 mm FTG256 package, allocate at least four PCB layers with a solid ground plane under the device to control simultaneous switching noise (SSN). All I/O banks must share a common Vcco reference per bank, and unused pins should be left floating per AMD/Xilinx guidelines to avoid leakage paths during configuration. This page synthesizes distributor pricing, drop-in same-package alternatives (XC3S400A-4FTG256I and XC3S400-4FTG256C), and practical design notes not consolidated in the manufacturer datasheet alone.

RFQ संपर्क
XC3S400A-5FTG256C - 8064-Cell Spartan-3A FPGA | AMD
XC3S400A-5FTG256C

XC3S400A-5FTG256C - 8064-Cell Spartan-3A FPGA | AMD

The AMD XC3S400A-5FTG256C is a Spartan-3A field-programmable gate array with 8064 logic cells, 368640 RAM bits, 195 user I/O, and a 400000-gate capacity, supplied in a 256-LBGA package. The -5 speed grade is intended for performance-oriented digital designs, while the C suffix identifies the commercial temperature grade. An FPGA is a programmable digital integrated circuit that combines configurable logic blocks, programmable interconnect, and input/output blocks in a single semiconductor device. Its internal fabric can be configured by a design tool to implement counters, state machines, interfaces, processors, signal-processing pipelines, or complete embedded systems. The XC3S400A belongs to the Spartan-3A family, which is positioned for high-volume, cost-sensitive, I/O-intensive equipment. Key device characteristics include 896 logic-related LAB or CLB resources, 195 user I/O, 368640 bits of embedded block RAM, and a 1.14 V to 1.26 V operating supply range. The 256-LBGA package supports dense board layouts and high pin counts compared with smaller plastic packages. The commercial temperature grade is specified for 0°C to 85°C junction temperature operation, so the design must maintain adequate margin across the complete system temperature range. The Spartan-3A architecture uses configurable logic, dedicated block RAM resources, dedicated multipliers, and programmable I/O blocks. This combination allows parallel data processing without the recurring unit cost of a mask change on a custom ASIC. Device configuration and timing closure remain design-engineering responsibilities, and the selected I/O standards must be compatible with the target board voltage and external devices. Typical applications include industrial control and data acquisition, embedded communications equipment, video and image-processing subsystems, instrumentation interfaces, and compact control logic. The 195 I/O count is useful for designs that need numerous parallel digital connections, while the 368640 RAM bits support packet buffering, data capture, or modest-width memories. For PCB layout, follow the AMD Spartan-3A package pinout and power-decoupling recommendations, including the requirements for each supply rail. Check the selected I/O standard against the board’s signal levels and confirm the -5 speed grade against the timing requirements of the selected clock rate. Validate the design with the appropriate AMD FPGA implementation and timing tools. This page combines the device specifications, qualified drop-in alternatives, comparison parameters, and practical design guidance to accelerate component selection, footprint review, and legacy Spartan-3A design maintenance.

RFQ संपर्क
XC3S50-4CP132I - 50K-Gate Spartan-3 FPGA | Xilinx
XC3S50-4CP132I

XC3S50-4CP132I - 50K-Gate Spartan-3 FPGA | Xilinx

The Xilinx XC3S50-4CP132I is a 50,000-system-gate Spartan-3 field-programmable gate array in a 132-terminal, approximately 8 mm square TFBGA package. Verified listings identify the device as a 192-CLB FPGA, while one comparison source states 630 MHz and 90 nm process technology. The “-4” ordering code identifies the performance grade, “CP” identifies the package family, “132” identifies the terminal count, and “I” identifies the industrial temperature grade. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, interconnect, and programmable I/O resources can be configured after manufacture. Within the product hierarchy, an FPGA is a programmable logic device and a configurable semiconductor. Spartan-3 devices target cost-sensitive embedded systems where parallel logic, state machines, protocol handling, data acquisition, and modest control functions must fit into a compact board area. The verified sources report 50,000 system gates and 192 configurable logic blocks. The DigiKey result for the closely identified XC3S50-4CPG132I also reports 73,728 registers and 1,728 logic cells, but those figures were not explicitly supplied for XC3S50-4CP132I and therefore are not treated as target specifications here. The target belongs to the Spartan-3 family and is suitable for consumer, automotive, industrial, telecommunications, communications-hardware, and embedded-control applications. The CP132 package uses ball terminals and is identified by sources as TFBGA or CSPBGA. Because it is a fine-pitch, 132-terminal surface-mount package, PCB layout quality directly affects assembly yield and long-term reliability. Its approximately 8 mm square body demands exact land-pattern, solder-mask, stencil, and component-placement verification against the manufacturer package drawing before fabrication. Typical designs use configurable logic for acquisition control, sensor conditioning, digital filtering, communications, industrial interfaces, and compact embedded systems. Unlike a microcontroller, this FPGA performs parallel operations in hardware and can achieve deterministic latency after configuration. Designers must still supply configuration memory or another supported configuration source, clocking, decoupling, I/O standards, and a valid power-distribution network. The primary procurement caution is lifecycle and exact-ordering-code validation. Multiple distributors reported inventory in October 2026, but long-term availability should be confirmed for the production quantity rather than inferred from a single marketplace listing. Rochester Electronics reported 22.534 units and a starting unit price of $2.10, while another marketplace result reported 5,641 pieces; these figures are source-specific and should not be treated as guaranteed consolidated stock. This page consolidates verified package, capacity, market-availability, and cross-reference information with a strict analysis of whether any candidate is truly drop-in compatible. Unlike a generic distributor listing, it also distinguishes exact evidence from unavailable electrical, pin-level, lifecycle, and certification details so engineers can identify what still requires manufacturer-documentation review.

RFQ संपर्क
XC3S50-4CPG132C - 4-Speed Spartan-3 FPGA | AMD
XC3S50-4CPG132C

XC3S50-4CPG132C - 4-Speed Spartan-3 FPGA | AMD

The AMD XC3S50-4CPG132C is a Spartan-3 field-programmable gate array supplied in a 132-ball TFBGA package, with 89 I/O and a distributor-listed logic-resource value of 73728. The ordering code identifies a -4 speed grade and a commercial-temperature grade through the C suffix. AMD acquired the original Xilinx Spartan-3 product line, so historical design materials commonly identify this device as XC3S50 rather than by its current corporate name. A field-programmable gate array, or FPGA, is a reconfigurable digital integrated circuit in which configurable logic blocks, programmable interconnect, and input/output resources implement a digital design. Within the semiconductor hierarchy, an FPGA sits above a programmable logic device and occupies the broader categories of programmable logic and digital logic ICs. Unlike a fixed-function microcontroller or application-specific processor, an FPGA allows parallel hardware architectures, timing control, and post-configuration logic updates. The verified distributor listing identifies 89 I/O, a 73728 logic-resource value, a 1728 feature value, and a 132-TFBGA package. The exact interpretation of the 73728 and 1728 distributor fields should be confirmed against the applicable Spartan-3 family data sheet before they are used in a resource budget. The part is identified as a Spartan-3 FPGA IC and is listed by DigiKey, Octopart, Win Source, IC-Components, and other distributors. The -4 suffix denotes the device speed grade within the Spartan-3 ordering system. A -4 grade is generally selected when design timing must be closed under a specified system clock, while it should not be treated as a guaranteed replacement for every speed grade. The C suffix identifies the commercial temperature grade, but exact minimum and maximum junction or ambient temperature limits require verification from the original manufacturer data sheet because those limits were not included in the retrieved snippets. The 132-ball TFBGA package supports compact, high-density board layouts, although its fine ball pitch makes inspection and rework more demanding than with a leaded package. Typical design uses include custom interface controllers, data-acquisition logic, embedded control functions, protocol bridges, and parallel signal processing. The 89 I/O count is a useful initial planning figure, but designers must also account for dedicated configuration pins, power pins, and other package balls that cannot be assigned as general user I/O. Because a BGA pin map was not included in the verified source material, the complete pin assignment cannot be reproduced safely. Before layout release, obtain the official Spartan-3 package data, confirm every power, ground, configuration, and user-I/O ball, and use the manufacturer land pattern and decoupling guidance. Do not infer the 132-ball map from the 89 user-I/O count. This page consolidates the verified distributor identity, package information, ordering-code details, cross-reference findings, and practical migration guidance. It also separates confirmed values from fields that still require manufacturer-document verification, helping engineers assess this legacy FPGA without treating distributor search snippets as a substitute for the complete data sheet.

RFQ संपर्क
XC3S50-4CPG132C0974 - Spartan-3 FPGA, 50K Gates, 132-CSBGA | AMD
XC3S50-4CPG132C0974

XC3S50-4CPG132C0974 - Spartan-3 FPGA, 50K Gates, 132-CSBGA | AMD

The AMD (formerly Xilinx) XC3S50-4CPG132C0974 is a Spartan-3 Field Programmable Gate Array offering 50,000 system gates, 1,728 logic cells, and 89 user I/Os in a 132-ball Chip-Scale BGA (CSBGA / TFBGA) package. The device is part of the lowest-density Spartan-3 family, designed for cost-sensitive, high-volume applications requiring programmable logic glue, custom bus interfaces, and low-cost DSP functions without the overhead of higher-density FPGAs. A Field Programmable Gate Array (FPGA) is a semiconductor device built around an array of configurable logic blocks (CLBs), programmable interconnect, and I/O cells that the designer configures after manufacture. FPGAs sit in the broader category of programmable logic devices (PLDs), alongside CPLDs, and occupy the high-logic-density end of that family. Within a digital system, an FPGA typically handles parallel processing, high-speed glue logic, custom peripheral bridging, and rapid-prototype ASIC replacement. Key differentiating features of the XC3S50 include 73,728 bits of distributed SelectRAM, 16 dedicated 18x18 hardware multipliers (DSP48-style slices for Spartan-3), four Digital Clock Managers (DCMs) for zero-delay clock alignment and frequency synthesis, and JTAG IEEE 1149.1/1532 boundary-scan support. The 132-ball CSBGA package supports up to 89 user I/Os at densities appropriate for industrial control, consumer, and communications glue logic. The speed grade -4 indicates a mid-range timing bin (faster than -5, slower than -3) optimized for design margin rather than peak performance. The Spartan-3 architecture combines a sea-of-CLBs fabric with block RAM tiles, multipliers, and DCMs stitched together by a hierarchical routing network. The 90 nm process node and 1.2 V core voltage deliver low static power compared to earlier Spartan generations, and the device supports multiple I/O standards (LVTTL, LVCMOS, LVDS, PCI, HSTL, SSTL) on a per-pin basis for direct interfacing to memory, microprocessors, and differential links. The -C suffix indicates a commercial temperature grade (0 C to +85 C). Typical applications include consumer electronics glue logic, industrial control and machine interfaces, low-cost DSP pre/post-processing, custom peripheral expansion for microcontrollers, and legacy ASIC replacement in production. Designers select the Spartan-3 family for non-volatile-free, lowest-cost FPGA deployment where the simplicity of SRAM configuration is acceptable. When designing with the XC3S50-4CPG132C0974, ensure that the configuration memory (typically an external SPI flash or Platform Flash) is sized appropriately for the bitstream and that the JTAG chain is accessible for in-system programming. Consider migrating to the pin-compatible Spartan-3AN or Spartan-6 family for new designs that require non-volatile configuration or lower power. This page synthesizes distributor pricing, drop-in Spartan-3 family alternatives, and practical design notes not found in the bare manufacturer datasheet front matter.

RFQ संपर्क
XC3S50-4CPG132I - 1728-Logic-Cell Spartan-3 FPGA | AMD
XC3S50-4CPG132I

XC3S50-4CPG132I - 1728-Logic-Cell Spartan-3 FPGA | AMD

AMD XC3S50-4CPG132I is a Spartan-3 field-programmable gate array with 1,728 logic cells, 89 user I/O, and 73,728 RAM bits in a 132-pin TFBGA/CSPBGA package. The device operates from a 1.14 V to 1.26 V supply and is specified for a -40°C to 100°C junction-temperature range. Its -4 speed designation identifies the performance grade used by the ordering code, while the I suffix identifies the industrial temperature option. A field-programmable gate array is a semiconductor device whose digital logic and interconnect structures are configured after manufacture. An FPGA sits above programmable logic within the broader semiconductor hierarchy and differs from a fixed-function application-specific integrated circuit because one package can implement many control, interface, datapath, or communication designs. This configurability is useful when product requirements evolve, production volumes warrant custom logic, or a system needs parallel processing beyond a simple microcontroller. The verified device data identifies 192 LABs or CLBs, 89 I/O, and 73,728 RAM bits. These resources support parallel state machines, control logic, data acquisition, communications, and embedded control functions. The Spartan-3 architecture is specifically associated with a 1.2 V-class supply in the supplied results, but individual bank requirements, configuration interfaces, AC/DC limits, and timing values must be checked in the official family documentation before implementation. Typical uses include industrial controllers, data-acquisition systems, communication peripherals, instrumentation, embedded processors, and compact control platforms. Its 89 available I/O provide external interfaces for clocks, serial links, digital buses, status indicators, and actuator controls. Designers should account for the 132-ball package when planning fanout and PCB escape routing, and must preserve the exact ball assignments used by the selected board design. For a new board, XC3S50-4CPG132I is appropriate when its 1,728 cells and 73,728 RAM bits satisfy the design and when an industrial-temperature, 1.2 V-class FPGA is required. For a direct replacement, compatibility must include the 132-ball footprint, exact ball map, supply rails, I/O standards, configuration interface, timing margin, and bitstream support rather than package count alone. This product record combines verified source specifications, procurement context, and engineering checks that should precede substitution. It distinguishes confirmed values such as cell count, RAM, I/O, voltage, package, and temperature from data that still requires the official pinout, price, lifecycle, and electrical-characteristic tables.

RFQ संपर्क
XC3S50-4PQ208C - 50K Gate Spartan-3 FPGA | AMD
XC3S50-4PQ208C

XC3S50-4PQ208C - 50K Gate Spartan-3 FPGA | AMD

The AMD XC3S50-4PQ208C is a 50,000-system-gate Spartan-3 field-programmable gate array with 1,728 logic cells, 124 user I/O pins, and a 208-pin PQFP package. The supplied data identifies a 1.2 V device and a maximum stated frequency of 630 MHz. Its architecture combines configurable logic, programmable I/O, and 73,728 total RAM bits in a cost-optimized device intended for logic-intensive embedded and control systems. A field-programmable gate array is a semiconductor device whose logic and interconnect resources are configured after fabrication. FPGAs sit above simple fixed-function logic devices in the hardware hierarchy because designers can implement counters, state machines, interfaces, control logic, and signal processing without manufacturing a custom integrated circuit. The Spartan-3 family targets applications where moderate logic density, flexible I/O, and economical implementation are more important than the very high capacity of larger FPGAs. The XC3S50-4PQ208C provides 50,000 system gates and 1,728 logic cells, while the supplied distributor information reports 124 user I/O pins. Its 73,728 RAM bits can support small internal buffers, lookup-table-based storage, counters, and communication state. The 208-pin PQFP package is a leaded surface-mount package that is easier to inspect and rework than a very fine-pitch BGA, although its 208 leads require a substantially larger board footprint. The device is associated with 90 nm technology and a 1.2 V supply in the supplied product references. The -4 designation is associated with the device’s speed grade, while the C suffix identifies the commercial temperature/grade coding used by the manufacturer’s ordering system. Exact timing constraints should be taken from the applicable Xilinx Spartan-3 datasheet and the selected design package. Typical uses include industrial control, instrumentation, communications, embedded systems, consumer electronics, and compact digital logic platforms. The 124 available I/O pins make the device useful when a design requires more external connectivity than a small FPGA package provides. The internal RAM can support protocol state, data buffering, and lookup functions without using external memory when the required storage is small. Designers should verify the exact pinout, power rails, decoupling requirements, configuration interface, I/O standards, and timing constraints against the official Spartan-3 documentation before layout. The PQFP footprint requires adequate solder mask and paste design around 208 leads, while the FPGA’s configuration pins, clock inputs, and I/O buffers must be planned during schematic capture. This page consolidates distributor and manufacturer-linked reference information, including logic density, RAM, I/O count, package, voltage, and stated frequency, and provides engineering guidance for selecting and integrating the XC3S50-4PQ208C. Availability, pricing, lifecycle status, and exact electrical limits should be confirmed against the current authorized source data.

RFQ संपर्क
XC3S50-4PQ208I - 50K Spartan-3 FPGA, 208-Pin | Xilinx
XC3S50-4PQ208I

XC3S50-4PQ208I - 50K Spartan-3 FPGA, 208-Pin | Xilinx

The Xilinx XC3S50-4PQ208I is a Spartan-3 field-programmable gate array with 50,000 system gates, 1,728 logic elements, 124 user I/O pins, and a 208-pin BFQFP package. According to the verified product data, it uses 1.2 V core technology, offers 73,728 RAM bits, and is rated for an operating temperature range of 0°C to 85°C. The device is designed for programmable logic, embedded control, communications, and cost-sensitive digital systems. A field-programmable gate array is a semiconductor device whose digital logic is configured after manufacture. An FPGA combines programmable logic blocks, programmable interconnect, input/output blocks, and memory resources into a flexible parallel-processing platform. The Spartan-3 family targets designs that need more capability than simple fixed-function logic while retaining cost, power, and design-entry advantages appropriate to compact embedded systems. The XC3S50-4PQ208I provides 50,000 system gates, 1,728 logic cells, 124 user I/O pins, and 73,728 RAM bits. Its -4 speed designation identifies the verified performance grade, while the I suffix denotes the specified industrial temperature class. The 208-BFQFP package provides 208 physical terminals for PCB integration, with gull-wing leads and a square package format. The verified distributor listing also identifies 1.2 V FPGA operation and 90 nm technology. Because the device is programmable, engineers can implement parallel datapaths, control logic, interfaces, state machines, and signal-processing functions in one integrated device. The Spartan-3 architecture is useful when deterministic hardware timing and flexible post-build updates are more valuable than the simplicity of a fixed-function microcontroller or small PLD. Resource counts should be checked against the complete Xilinx datasheet before assigning a large design, especially when block RAM, DSP, clocking, or high-speed I/O requirements are substantial. Typical uses include industrial control, communications interfaces, test equipment, instrumentation, embedded gateways, and compact control systems. The 124 user I/O pins are useful for parallel buses, status LEDs, capture logic, and external interfaces. Designers must also budget pin multiplexing, clocking, configuration memory or configuration sources, I/O standards, power rails, and board-level signal integrity; those details are not fully specified in the supplied search data and must be verified against the manufacturer datasheet. A key design consideration is that an FPGA replacement must match the physical package, pinout, electrical limits, configuration method, memory resources, and timing requirements. The verified search results identify no pin-compatible substitute in the supplied cross-reference data, so a footprint-compatible replacement should not be assumed. This page consolidates verified specifications, sourcing links, application guidance, and the limitations of the available replacement data.

RFQ संपर्क
XC3S50-4PQG208C - 50K Gate Spartan-3 FPGA | AMD
XC3S50-4PQG208C

XC3S50-4PQG208C - 50K Gate Spartan-3 FPGA | AMD

The AMD XC3S50-4PQG208C is a Spartan-3 field-programmable gate array with 50,000 system gates, 1,728 logic cells, 124 user I/O, and a 630 MHz performance figure in a 208-pin PQFP package. It uses 90 nm fabrication technology, a 1.2 V core supply, and 3.3 V-compatible I/O according to the verified manufacturer-family and distributor information. The commercial-temperature suffix C supports operation from 0°C to 85°C. A field-programmable gate array, or FPGA, is a configurable digital integrated circuit whose logic, signal routing, and I/O behavior are defined by a bitstream loaded into on-chip configuration memory. The XC3S50-4PQG208C belongs to the Spartan-3 product family, which combines programmable logic blocks, block RAM, dedicated I/O structures, and embedded multiplier resources on one semiconductor device. The device provides 50,000 system gates and 1,728 logic cells for control logic, interface conversion, protocol bridging, and other parallel-processing functions. Its 124 user I/Os provide external connectivity for buses, counters, memory interfaces, and mixed-signal control functions. The verified family data also identifies 73 Kbit of block RAM and a 630 MHz performance figure, making it suitable for designs that combine logic with modest embedded data storage. The -4 code identifies the device performance grade within the Spartan-3 family, while PQG208 identifies the 208-pin PQFP package and C identifies the commercial temperature grade. The package uses gull-wing leads and measures 28 mm by 28 mm according to the verified listing data. The 1.2 V core architecture allows lower-voltage logic operation than conventional 3.3 V-only programmable logic implementations. Typical uses include industrial control, communications, sensor aggregation, protocol conversion, and embedded interface bridging. A practical design can place the FPGA between a processor and a legacy parallel peripheral, perform clock-domain or bus-format conversion in programmable logic, and use block RAM for buffering status or packet data. Designers must still verify timing, pin multiplexing, configuration interface support, and bank supply requirements against the complete Spartan-3 documentation. Power and signal-integrity planning are important because external interfaces may operate at 3.3 V while the core uses 1.2 V. Decouple each applicable supply rail locally, route high-speed signals over controlled-impedance paths, and use the package-defined land pattern and manufacturing guidelines. Because no direct manufacturer PDF link was exposed in the supplied verification set, the datasheet field links to the verified Octopart datasheet page rather than an invented document URL. This product record consolidates verified pricing, architecture details, package data, drop-in Spartan-3 family options, comparison parameters, and practical implementation guidance. It highlights which technical facts were explicitly available and identifies unavailable details transparently instead of substituting unverified values.

RFQ संपर्क
XC3S50-4PQG208I - Spartan-3 FPGA, 50K Gates, PQFP-208 | AMD/Xilinx
XC3S50-4PQG208I

XC3S50-4PQG208I - Spartan-3 FPGA, 50K Gates, PQFP-208 | AMD/Xilinx

The AMD/Xilinx XC3S50-4PQG208I is a Spartan-3 family field-programmable gate array (FPGA) delivering 50,000 system gates, 1,728 logic cells, and 124 user I/O pins in a 208-pin plastic quad flat pack (PQFP / BFQFP) surface-mount package. The device operates from a 1.14V to 1.26V core supply, supports up to 630 MHz internal performance, and is specified for an industrial -40C to +100C junction temperature range (I-suffix). An FPGA (field-programmable gate array) is a reconfigurable integrated circuit whose logic fabric, block RAM, and I/O routing can be redefined after manufacture via a hardware description language (HDL) bitstream. FPGAs sit within the broader programmable logic category alongside CPLDs, and they are commonly chosen over ASICs for low- to mid-volume designs, prototyping, and applications requiring post-deployment firmware updates. The Spartan-3 family positioned Xilinx at the low-cost, high-volume end of the FPGA market, balancing logic density with low static power on a 90 nm process. Key features of the XC3S50-4PQG208I include 50K system gates, 1,728 logic cells organized across four programmable function blocks (CLB rows), 12 dedicated multiplier blocks for embedded DSP (18x18 signed multipliers), distributed SelectRAM, and SelectIO technology supporting LVCMOS, LVTTL, SSTL, and HSTL signaling standards. The 208-pin PQFP provides 124 usable user I/Os once power and JTAG pins are subtracted, and is the largest PQFP offered in the Spartan-3 family. Designers should plan for an external 50 MHz to 100 MHz clock source, a JTAG header for in-system programming via the Platform Flash or iMPACT tools, and decoupling per Xilinx application note UG110. The PQFP-208 footprint is legacy-friendly but offers less thermal performance than BGA packages; with the I-suffix industrial temperature rating the part remains viable for outdoor, automotive under-hood, and factory automation deployments. Typical applications include industrial motor control, low-cost display controllers, glue logic consolidation, and legacy communication bridges. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical PCB-layout design notes not found in the manufacturer datasheet alone.

RFQ संपर्क
XC3S50-4TQ144C - 50K-Gate Spartan-3 FPGA | AMD
XC3S50-4TQ144C

XC3S50-4TQ144C - 50K-Gate Spartan-3 FPGA | AMD

The AMD XC3S50-4TQ144C is a Spartan-3 field-programmable gate array with 50,000 system gates, 1,728 logic cells, 97 user I/Os and 73,728 RAM bits in a 144-LQFP package. It operates from a 1.2 V supply and belongs to the Spartan-3 FPGA family. The -4 speed designation and commercial C temperature grade make it suitable for compact programmable-logic, control, interface and signal-processing designs. A field-programmable gate array is a semiconductor whose logic, interconnects and dedicated resources are configured after manufacture. The FPGA product hierarchy places the XC3S50-4TQ144C among FPGAs, programmable-logic devices and digital semiconductors. Unlike a fixed-function application-specific integrated circuit, an FPGA can implement parallel control logic, state machines, protocol interfaces and data-processing pipelines in one configurable device. The verified listing identifies 192 logic array blocks, 97 user I/O pins, 73,728 RAM bits and 1,728 logic cells. These resources support concurrent datapaths and moderate control complexity. The 1.2 V core supply can simplify power architecture when paired with appropriate I/O voltage selection, although the complete board design must follow the manufacturer’s bank-specific voltage and decoupling guidance. Architecturally, the Spartan-3 device combines configurable logic blocks, programmable routing, dedicated block RAM and hard input/output resources. This allows designers to balance parallel logic against memory-based pipelines. Compared with larger members of the Spartan-3 family, the XC3S50 emphasizes compact capacity and cost rather than maximum logic density. Typical uses include industrial control, embedded instrumentation, communication-interface bridges, low-pin-count peripheral expansion, digital signal-processing front ends and general embedded control. A 144-LQFP package also provides a familiar gull-wing footprint for conventional multilayer PCB assembly, although its fine pitch requires controlled soldering and inspection. Designers should verify the complete pinout, supported I/O standards, configuration interface and unused-pin requirements against the manufacturer datasheet before layout release. The sparse verified data does not expose a manufacturer part page or complete electrical table, so power, timing and pin details must not be inferred. This page consolidates verified distributor specifications, package evidence, sourcing links and candid data-gap notes. It also separates exact published facts from unavailable electrical, pricing, lifecycle and pin-level information so engineers can make a safer FPGA selection.

USD $45.94 स्टॉक में
XC3S50-4TQ144I - 50K Spartan-3 FPGA, 144-LQFP | AMD
XC3S50-4TQ144I

XC3S50-4TQ144I - 50K Spartan-3 FPGA, 144-LQFP | AMD

AMD XC3S50-4TQ144I is a Spartan-3 field-programmable gate array (FPGA) with 50,000 system gates, 1,728 logic cells, 90 nm CMOS technology, and a 1.2 V supply in a 144-pin LQFP package. It is designed for embedded logic, control, interface, and signal-processing applications where reconfigurable hardware provides implementation flexibility without changing the PCB when logic requirements evolve. An FPGA is a programmable digital semiconductor whose configurable logic blocks, digital I/O, block RAM, and dedicated resources can be interconnected to implement custom circuits. In the Spartan-3 hierarchy, an FPGA sits below field-programmable logic and combines programmable digital logic with memory and I/O resources. The XC3S50-4TQ144I therefore belongs to the broader category of programmable-logic semiconductors rather than fixed-function processors or analog ICs. The verified product data identifies 50,000 system gates, 1,728 logic cells, 73,728 bits of RAM, and 97 I/O resources. The part is offered in a surface-mount 144-pin LQFP package and uses a 1.2 V FPGA supply as identified by distributor data. Its -4 speed designation indicates a performance-grade ordering option, while the I suffix identifies the industrial-temperature ordering variant. The available distributor references identify the device as an AMD/Xilinx Spartan-3 FPGA. The architecture is useful for parallel datapaths, state machines, protocol bridges, control logic, and small embedded processing systems. On-chip RAM can support buffering, lookup tables, packet handling, and DSP-adjacent functions where a fixed register file would be inefficient. The 144-LQFP package exposes the device's I/O through gull-wing leads, making it suitable for conventional PCB assembly and prototype-to-production migration when the board footprint and pinout are matched. Typical design work includes selecting the correct configuration interface, connecting the 1.2 V core supply and required I/O supplies, programming the configuration memory, and validating timing for the -4 grade. Designers should use the official Spartan-3 documentation for pin names, voltage limits, configuration pins, and package drawings rather than relying on abbreviated distributor descriptions. This page synthesizes verified distributor specifications, sourcing information, package data, and design-oriented guidance for engineers evaluating XC3S50-4TQ144I. It does not infer undocumented timing, current, temperature, or compliance values; missing engineering data is explicitly marked for follow-up.

RFQ संपर्क
XC3S50-4TQG144C - 50K Spartan-3 FPGA, 144-TQFP | AMD Xilinx
XC3S50-4TQG144C

XC3S50-4TQG144C - 50K Spartan-3 FPGA, 144-TQFP | AMD Xilinx

AMD Xilinx XC3S50-4TQG144C is a Spartan-3 field-programmable gate array with 50,000 system gates, 1,728 logic cells, and a 144-lead TQFP package. The device operates from a 1.14 V to 1.26 V core supply, uses 90 nm fabrication technology, and is offered in a commercial-temperature grade specified for a 0°C to 85°C operating junction range. These characteristics place it in the FPGA and CPLD category, where configurable logic replaces a fixed application-specific integrated circuit. A field-programmable gate array is a semiconductor containing programmable lookup tables, routing, block memory, and configurable input/output resources. It sits within the broader programmable-logic hierarchy of FPGA and CPLD devices, enabling parallel digital logic, control functions, serial communication, and embedded memory to be consolidated into one configurable device. The XC3S50-4TQG144C provides 97 dedicated I/O resources according to its distributor listing, giving a designer a substantial interface complement relative to its 50,000-system-gate logic capacity. The Spartan-3 architecture combines configurable logic with embedded block RAM and dedicated input/output resources in a single device. Its stated 630 MHz performance figure makes it suitable for clocked control logic, data acquisition, industrial interfaces, communications equipment, and embedded system prototypes. The four-speed-grade suffix identifies a device positioned for a maximum 630 MHz operation, while the TQG144 portion identifies the physical 144-pin TQFP package used for surface-mount PCB assembly. The 90 nm process and 1.2 V core supply provide useful context when comparing this device with later programmable-logic families. A 1.2 V core requires appropriate on-board supply regulation and decoupling, while the 144-pin package offers a conventional quad-flat lead arrangement that can simplify inspection and rework. Designers should still follow the AMD Spartan-3 selection guide, pinout, configuration guidance, and power-supply recommendations for the exact device variant. Typical uses include industrial automation, communications, automotive electronics, embedded control, data-capture, and general digital prototyping. In these applications, the FPGA can implement parallel pipelines or state machines while its programmable I/O interfaces external converters, sensors, memories, and communications transceivers. Its commercial operating grade and 50,000-system-gate capacity make it most appropriate when moderate logic density is needed without moving to a larger package. The principal design consideration is migration and configuration reliability. PCB design must preserve the TQFP-144 footprint, power and ground distribution, decoupling, configuration interface, and exposed I/O constraints of the selected Spartan-3 device. Although XC3S50AN-4TQG144C appears in cross-reference results, designers must confirm that configuration behavior, supported I/O standards, memory resources, and power requirements are fully interchangeable before using it as a replacement. This page consolidates verified distributor specifications, package details, temperature information, and candidate replacement data with practical selection guidance. It also distinguishes true same-package options from alternatives that require a different package, helping engineers reduce procurement and PCB-rework risk.

RFQ संपर्क
XC3S50-4TQG144I - 50K Spartan-3 FPGA, 144-TQFP | AMD
XC3S50-4TQG144I

XC3S50-4TQG144I - 50K Spartan-3 FPGA, 144-TQFP | AMD

The AMD XC3S50-4TQG144I is a Spartan-3 field-programmable gate array in a 144-pin TQFP package, built around 50,000 system gates, 1,728 logic cells, 192 configurable logic blocks, 97 user I/Os, and 73,728 bits of block RAM. The device uses a 90 nm process and a nominal 1.2 V core supply, making it suitable for compact embedded, industrial-control, communications, and cost-sensitive logic applications. Its industrial-temperature suffix identifies the XC3S50-4TQG144I as an extended-temperature option for systems requiring operation beyond commercial-temperature limits. A field-programmable gate array is a semiconductor device whose configurable logic, block memory, and programmable I/O can be programmed after manufacture. The Spartan-3 FPGA family belongs to the broader FPGA and programmable-logic hierarchy, while the XC3S50 device provides a balance of logic density, memory, and I/O capacity for control logic, data acquisition, protocol bridging, embedded signal processing, and general-purpose parallel processing. The XC3S50-4TQG144I is therefore a programmable-logic alternative to a collection of fixed-function glue-logic devices when design flexibility and field updates are important. Key resources include 50,000 equivalent system gates, 1,728 logic cells, 192 CLBs, 97 user I/Os, and 73,728 bits of block RAM. The -4 speed designation identifies the device performance grade, while the TQG144 package provides a 144-pin surface-mount footprint. The 1.2 V core operating point supports low-voltage digital core operation, while external circuitry supplies the board-level I/O and power requirements. The Spartan-3 architecture supports parallel programmable logic alongside dedicated block RAM for buffering, FIFOs, and data storage. This combination makes the XC3S50-4TQG144I useful for industrial controllers, communications interfaces, test equipment, embedded control systems, and sensor or acquisition platforms. The 97 available user I/Os provide connectivity for control signals, serial interfaces implemented in programmable logic, memory interfaces, and external peripherals. Designers should verify the device-specific pinout, configuration interface, power rails, decoupling requirements, and supported I/O standards against the official Spartan-3 documentation before layout or schematic release. The TQFP package is pin-compatible with other verified 144-pin Spartan-3 variants only where the exact device, speed grade, package code, and electrical requirements match. Configuration should also include a defined startup path, suitable clocking, and adequate power-supply sequencing. This page consolidates verified distributor and manufacturer-linked specifications, practical application guidance, same-footprint replacement candidates, and design cautions. It is intended to help engineers identify whether the XC3S50-4TQG144I matches the required logic density, memory capacity, package, temperature class, and supply requirements without relying on incomplete catalog summaries.

RFQ संपर्क