उत्पाद (46,000+)

MC9S08MM32ACLH - 8-bit S08 MCU, 32KB Flash, 48MHz | NXP
MC9S08MM32ACLH

MC9S08MM32ACLH - 8-bit S08 MCU, 32KB Flash, 48MHz | NXP

The NXP Semiconductors MC9S08MM32ACLH is an 8-bit microcontroller based on the S08 CISC core, delivering up to 48MHz CPU frequency at 3.6V (40MHz above 2.1V, 20MHz above 1.8V), with 32KB of flash program memory, housed in a 64-pin LQFP (10 x 10 mm) surface-mount package. A microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory, data memory, and peripherals such as timers, communication interfaces, and analog blocks onto one die. In the product hierarchy, the MC9S08MM32ACLH belongs to the 8-bit microcontroller class, the S08 family, and general-purpose embedded control ICs, sitting below 32-bit MCUs in complexity but excelling in cost-sensitive, low-power control tasks. Key features include the wide 1.8V to 3.6V supply voltage range, 33 general-purpose I/O lines, RoHS-compliant lead-free packaging, and an operating temperature rating up to 105C ambient, which together support automotive-adjacent and industrial environments. The voltage-dependent clock scaling lets designers trade speed against power consumption dynamically, a distinct advantage for battery-powered designs. Architecturally, the S08 core is an enhanced, fully static CISC 8-bit engine descended from the Freescale (now NXP) 68HC08 lineage, offering efficient instruction execution, low-interrupt latency, and mature development tools including CodeWarrior support. The 32KB flash array supports in-system reprogramming, enabling field firmware updates without socketed parts. Typical applications include consumer appliance control, small motor and lighting control, battery management and portable instrumentation, and industrial sensing nodes where an 8-bit MCU with rich flash and many I/O pins is sufficient. When designing with this device, verify that your target clock frequency matches the operating supply voltage per the voltage-versus-frequency derating (48MHz only above the upper voltage range) to avoid marginal timing. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet, with data verified as of 2026-10-18.

RFQ संपर्क
MC9S08MM32AVLH - 8-Bit 48MHz 32KB Flash MCU | NXP
MC9S08MM32AVLH

MC9S08MM32AVLH - 8-Bit 48MHz 32KB Flash MCU | NXP

The NXP Semiconductors MC9S08MM32AVLH is an 8-bit S08 microcontroller rated for operation up to 48 MHz, with 32 KB of Flash program memory and 2 KB of RAM in a 64-LQFP package measuring 10 mm by 10 mm. It belongs to the S08MM family, a microcontroller platform designed to combine general-purpose embedded control with precision analog measurement, serial connectivity, display support, and timing peripherals. The verified product information identifies I2C, SCI, and SPI connectivity, together with low-voltage detection, power-on reset, PWM, and a watchdog timer. A microcontroller is a semiconductor that integrates a processor core, program memory, data memory, input/output ports, and peripherals into one device. In the product hierarchy, the MC9S08MM32AVLH is an 8-bit MCU, part of the S08 family, and a member of the broader embedded-control and semiconductor category. Its combination of 48 MHz processing performance and 32 KB Flash makes it appropriate for products that need more control headroom than a very small low-cost MCU while retaining a relatively compact 64-pin surface-mount package. The key features of this device include an 8-bit S08 core, 48 MHz maximum clock frequency, 32 KB of Flash memory, 2 KB of RAM, 33 I/O pins, and integrated I2C, SCI, and SPI interfaces. The S08MM family is also associated with graphic display support and precision analog measurement capabilities. These peripherals can reduce the number of external components required for a measurement instrument, display-based product, or industrial control design. The 64-LQFP package provides 64 terminals, while the verified source identifies 33 I/O. The NXP product page identifies MC9S08MM32AVLH as an end-of-life-related part and separately describes the family as supporting medical, instrumentation, and industrial applications requiring significant precision analog performance. Because the product is transitioning or has entered an end-of-life lifecycle, engineers should verify current availability, last-time-buy status, and approved sourcing before starting a new production design. The distributor results show reference inventory and pricing information, but stock levels and lead times can change quickly. Typical uses include handheld medical or diagnostic equipment, industrial instrumentation, measurement systems with graphic displays, and embedded products needing multiple serial interfaces. In a measurement instrument, the MCU could control sensors, run conversion routines, format results, and communicate with a host or display. In a medical product, the relevant design requirement is not merely clock speed but validated measurement accuracy, safety process, noise behavior, and application-specific regulatory controls. The manufacturer description states that the S08MM family is intended for medical applications and other precision analog applications, but no specific medical certification claim for this exact MPN was supplied in the verified data. For design work, confirm the exact operating-voltage range, analog specifications, pin multiplexing, clock configuration, memory map, and package drawing from the manufacturer datasheet before layout. Use decoupling close to the supply pins, preserve the recommended clock and reset connections, and validate every peripheral against the selected package pinout. When sourcing an equivalent, compare Flash size, RAM size, maximum frequency, I/O count, analog functions, serial peripherals, voltage limits, temperature grade, and pin mapping rather than relying on the family name alone. This page combines the verified NXP and distributor product information with application guidance and sourcing context. It is intended to help engineers identify whether the MC9S08MM32AVLH fits an existing embedded design, while clearly separating confirmed specifications from parameters that require confirmation from the manufacturer datasheet.

RFQ संपर्क
MC9S08MM32CLH - 8-Bit 48MHz S08 MCU 32KB Flash LQFP-64 | NXP
MC9S08MM32CLH

MC9S08MM32CLH - 8-Bit 48MHz S08 MCU 32KB Flash LQFP-64 | NXP

The NXP MC9S08MM32CLH is an 8-bit S08 microcontroller built around an HCS08 CISC core running at 48MHz, integrating 32KB of on-chip Flash memory and 2KB SRAM, housed in a 64-pin LQFP (10x10 mm) package. The device operates from a 1.8V to 3.6V supply (typical 2.5V/3.3V rails) and is qualified for industrial temperature range of -40C to +85C. An 8-bit microcontroller (MCU) is a single-chip computer that combines an 8-bit CPU, program memory (Flash), data memory (RAM), and a rich set of peripherals (timers, ADC, communication interfaces, GPIOs) into one IC. 8-bit MCUs occupy the lowest tier of the microcontroller family tree: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC, and remain the dominant choice for cost- and power-sensitive applications where full 32-bit processing is unnecessary. Key features of the MC9S08MM32CLH include background debug mode (BDM) for in-circuit programming, a 16-bit timer/PWM module, multiple serial interfaces (SCI/SPI), a 10-channel 12-bit ADC analog front end, an analog comparator, and an internal clock generator that can run from an external crystal or internal 1 kHz low-power oscillator. The 64-LQFP footprint exposes 56 GPIO-capable pins, providing wide parallel bus or multiple peripheral capability. Architecturally, the S08 core uses a von Neumann-style unified bus with a single-cycle access to Flash and two-cycle access to RAM. The 48MHz bus at 24MHz core (2:1 bus ratio) yields 48MHz effective instruction throughput with multi-cycle instructions reflecting the CISC heritage. The integrated voltage regulator and power management support multiple STOP and WAIT modes for battery-friendly duty cycling. Typical applications include USB device peripherals, touch-interface human-machine interfaces (HMI), low-cost consumer electronics, security and access control panels, motor control reference designs (small BLDC drivers under 100W), industrial sensor conditioning, and battery-powered handheld instrumentation. Its small footprint and integrated peripherals suit it for cost-sensitive designs transitioning from older HC08 or PIC16 architectures. When designing with the MC9S08MM32CLH, decouple VDD with a 100nF ceramic capacitor close to each supply pin pair, and provide a bulk 4.7uF capacitor near the chip. Use the BDM interface for firmware upgrades by reserving a 2x5 pin header on the board, and place the external crystal within 5mm of the XTAL pins with a clean ground return to reduce jitter in USB applications. This page synthesizes verified distributor pricing, parametric drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet, helping engineers evaluate the part in the context of contemporary 8-bit MCU alternatives for cost-optimized embedded designs.

RFQ संपर्क
MC9S08MM32VLH - 8-Bit 48MHz MCU 32KB Flash LQFP-64 | NXP
MC9S08MM32VLH

MC9S08MM32VLH - 8-Bit 48MHz MCU 32KB Flash LQFP-64 | NXP

The NXP Semiconductors MC9S08MM32VLH is an 8-bit S08 microcontroller IC running at up to 48 MHz with 32KB (32K x 8) of FLASH program memory, housed in a 64-pin LQFP (10 x 10 mm) package. Formerly manufactured by Freescale Semiconductor and now supplied by NXP, this device delivers 48 MHz CPU performance above 2.7 V, 40 MHz above 2.1 V, and 20 MHz above 1.8 V across the full -40C to +105C operating temperature range. An 8-bit microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals on one chip, forming the lowest tier of the embedded processor hierarchy (MCU -> embedded processor -> controller -> semiconductor). The S08 family is the enhanced successor to Freescale's HC08 instruction set architecture, widely used in cost-sensitive embedded control. Key features of the MC9S08MM32VLH include the HCS08 instruction set, a 1.8V to 3.6V supply voltage range, 33 general-purpose I/O lines, and on-chip FLASH memory that allows in-circuit reprogramming for firmware iteration and field updates. The 48 MHz maximum CPU clock enables fast execution of control loops and arithmetic-heavy routines uncommon in slower 8-bit platforms. Technical depth: the device scales its operating frequency with supply voltage, allowing designers to trade speed against power consumption. The wide temperature rating (105C) supports industrial and automotive-adjacent environments, while the 64-LQFP 10x10 mm body provides enough pins for 33 I/O plus power, oscillator, and debug connections without requiring fine-pitch assembly. Typical applications include industrial control and automation nodes, consumer appliance control panels, battery-powered instrumentation, motor control辅助 logic, and system-monitoring functions where an 8-bit core reduces software complexity compared to 32-bit alternatives. Design consideration: verify that the target CPU frequency matches the supply voltage rail - running above the published voltage-versus-frequency limits (48 MHz above 2.7 V, 40 MHz above 2.1 V, 20 MHz above 1.8 V) violates the datasheet operating conditions. This page synthesizes distributor pricing and stock data, drop-in S08-family alternatives, and practical design notes not found in the manufacturer datasheet, providing a single point of comparison for engineers evaluating the MC9S08MM32VLH.

RFQ संपर्क
MC9S08MM64CLH - 8-Bit 48MHz 64KB MCU | NXP | LQFP-64
MC9S08MM64CLH

MC9S08MM64CLH - 8-Bit 48MHz 64KB MCU | NXP | LQFP-64

NXP Semiconductors MC9S08MM64CLH is an 8-bit S08 microcontroller rated up to 48 MHz, with 64 KB of flash memory and USB connectivity in a 64-LQFP 10 x 10 mm package. The device belongs to the S08MM family of embedded microcontrollers, combining general-purpose control, precision analog measurement, and display-oriented connectivity in one component. Its industrial temperature grade and square gull-wing package make it suitable for established embedded control and instrumentation platforms. An 8-bit microcontroller is a compact computing platform designed around an 8-bit central processing unit, embedded memory, and dedicated peripherals for control applications. Within the product hierarchy, the MC9S08MM64CLH is a microcontroller, embedded processor, semiconductor, and programmable control component. It is intended to execute firmware that reads sensors, controls outputs, manages communication links, and coordinates user interfaces without requiring a separate host processor. Key features of the MC9S08MM64CLH include a 48 MHz maximum clock, 64 KB of flash memory organized as 64K x 8, an 8-bit architecture, and USB connectivity. The S08MM family also provides graphic display support and precision analog measurement capabilities. These functions make the microcontroller useful in medical equipment, industrial instrumentation, measurement systems, and compact human-interface applications where analog accuracy and local connectivity matter. The S08 architecture supports embedded firmware execution, while integrated analog and communication resources reduce the number of external components needed for common control designs. Flash memory provides nonvolatile program storage for the operating firmware, and the 48 MHz clock provides processing headroom for interrupt handling, communications, display updates, and measurement tasks. Exact RAM size, analog conversion performance, peripheral configuration, and operating limits should be confirmed in the NXP product documentation before schematic or firmware decisions are finalized. Typical applications include medical monitoring equipment, industrial process-control panels, portable measurement instruments, and USB-connected embedded products. In these systems, the MCU can supervise analog inputs, maintain control loops, update a display, and communicate with a host through USB. The 64 KB flash capacity is useful for firmware that includes calibration tables, control logic, diagnostics, and a human-machine interface. Design planning should begin with the NXP datasheet pin-description table and the family reference manual. Confirm supply voltage, programming interface, clock options, analog-pin multiplexing, USB routing, decoupling requirements, and exposed-pad guidance before layout release. Because a legacy 64-LQFP footprint is mechanically common but not functionally interchangeable with unrelated 64-pin MCUs, replacement decisions require pin-by-pin and peripheral-level verification rather than package comparison alone. This product record combines lifecycle information, exact catalog identifiers, package and memory details, application guidance, and verified drop-in replacement analysis. It highlights the engineering constraints that matter when maintaining or sourcing an end-of-life S08MM design: software compatibility, memory-map continuity, timing, USB behavior, analog calibration, and PCB footprint validation.

RFQ संपर्क
MC9S08MM64VLH - 8-Bit 48MHz 64KB MCU | NXP | 64-LQFP
MC9S08MM64VLH

MC9S08MM64VLH - 8-Bit 48MHz 64KB MCU | NXP | 64-LQFP

The NXP Semiconductors MC9S08MM64VLH is an 8-bit S08 microcontroller with a 48 MHz maximum CPU frequency, 64 KB of embedded Flash memory, and a 64-pin LQFP package. It operates from 1.8 V to 3.6 V and provides 33 general-purpose I/O ports. The device belongs to the S08MM family, combining an 8-bit MCU core with USB connectivity, graphic-display support, and precision analog measurement capabilities in one integrated component. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and I/O into a single device. The S08 core uses a compact instruction set suited to embedded control systems. Within the product hierarchy, the MC9S08MM64VLH is an 8-bit microcontroller, part of the broader embedded-processing and semiconductor category. Its combination of Flash memory, analog functions, communication capability, and external I/O allows a board to perform control, measurement, and user-interface functions without requiring several separate devices. Key specifications include a 48 MHz maximum clock, 64 KB of Flash program storage, a 1.8 V to 3.6 V supply range, and 33 I/O ports. NXP describes operation at up to 48 MHz above the specified upper supply threshold, 40 MHz above 2.1 V, and 20 MHz above 1.8 V across the stated temperature condition. The 64-LQFP package measures 10 mm by 10 mm and supports surface-mount assembly, providing ample pin access for analog, communication, display, and general-purpose control connections. The S08MM architecture is designed for cost-sensitive embedded systems requiring more measurement capability than a basic general-purpose MCU. USB connectivity can support direct peripheral interfacing, while the integrated precision analog resources are suitable for instrumentation and industrial equipment. The family also targets medical products that require compact control electronics and accurate analog measurement. Flash memory allows field-programmable application firmware, and the broad operating-voltage range supports systems operating from 1.8 V through 3.6 V rails. Typical uses include industrial measurement instruments, medical-device control modules, USB-connected compact peripherals, graphic-display controllers, and low-cost embedded control systems. In these applications, the MCU can manage sensor acquisition, run control algorithms, manage display updates, and coordinate USB data transfer. Its 33 I/O ports also allow direct connection of sensors, switches, indicators, and communication peripherals while limiting the need for external interface expansion. Designers should select the correct operating-frequency limit for the actual supply voltage and temperature. Decoupling, grounding, analog-signal routing, and exposed-pad or thermal management must follow the manufacturer layout guidance. Because firmware, interrupt configuration, memory organization, and peripheral assignments are device-specific, validate the complete hardware and software design against the NXP datasheet before production release. This product page consolidates the device identity, operating conditions, package details, sourcing information, drop-in candidates, and practical design considerations needed for initial MCU selection and PCB planning.

RFQ संपर्क
MC9S08MP12VWL - 51.34MHz 8-Bit 12KB Flash MCU | NXP
MC9S08MP12VWL

MC9S08MP12VWL - 51.34MHz 8-Bit 12KB Flash MCU | NXP

The NXP Semiconductors MC9S08MP12VWL is an 8-bit S08 microcontroller with a 51.34 MHz CPU, 12 KB (12K x 8) Flash program memory, 512 x 8 RAM, 22 I/O, and a 28-SOIC package. According to the retrieved distributor specifications, the device also uses an internal oscillator and operates from a 3.3 V or 5 V supply. A microcontroller is a programmable integrated circuit that combines a CPU, memory, peripherals, and input/output interfaces in one semiconductor package. The MC9S08MP12VWL belongs to the S08 embedded-control family and is designed for compact control systems requiring modest code storage, deterministic peripheral access, and a low-cost 8-bit architecture. Its 28-SOIC package supports conventional PCB assembly rather than requiring a fine-pitch BGA footprint. The key specifications identify an HCS08 CPU capable of 51.34 MHz, 12 KB of Flash memory, 512 bytes of RAM, and 22 I/O. The listed operating range is 3.3 V or 5 V, while the data cites an internal oscillator type. These characteristics make the MCU suitable for embedded products that need local control logic, sensor handling, actuator outputs, and moderate processing throughput without a higher-cost processor. Typical uses include industrial control, appliance controllers, measurement instruments, motor-control peripherals, and compact consumer equipment. The available data does not specify individual peripheral assignments, pin names, memory-map details, watchdog behavior, or communication peripherals, so those items should be confirmed in the manufacturer datasheet before schematic design. For a new PCB, verify the exact 28-SOIC footprint, power decoupling requirements, oscillator connections, programming interface, and pin multiplexing against the official device documentation. The retrieved listing identifies the part as an S08 microcontroller, but it does not establish lifecycle status, pricing, or complete electrical limits. This product page consolidates the verified distributor identity, package, memory, clock, I/O, and supply information. It also distinguishes verified facts from parameters that still require confirmation from the manufacturer datasheet, helping engineers move from component identification to design validation.

RFQ संपर्क
MC9S08MP16VLF - 51.34MHz 16KB Flash S08 MCU | NXP
MC9S08MP16VLF

MC9S08MP16VLF - 51.34MHz 16KB Flash S08 MCU | NXP

NXP Semiconductors MC9S08MP16VLF is an 8-bit S08 microcontroller operating at up to 51.34 MHz, with 16 KB of Flash memory and a 48-pin LQFP (7 mm × 7 mm) package. It is designed for cost-sensitive motor-control systems, combining an S08 MCU core with dedicated PWM, analog-comparator, and programmable-gain-amplifier resources in an integrated embedded-control device. An 8-bit microcontroller is a compact embedded processor designed to execute control, monitoring, and communication tasks with deterministic peripheral handling. The MC9S08MP16 belongs to the S08 family of 8-bit MCUs, combining processor logic with timers, communication interfaces, analog conversion functions, and I/O resources in one package. This integration allows a motor-control design to use fewer discrete components than a solution built from separate logic and analog components. The MC9S08MP16VLF provides 16 KB (16K × 8) Flash program memory and operates at a listed frequency of 51.34 MHz. Its 8-channel PWM/flextimer module supports hardware dead-time insertion for motor-control applications, while analog comparators and a programmable gain amplifier support signal conditioning and feedback functions. The listed operating-voltage range is 3.3 V or 5 V, providing flexibility between industrial and automotive-style embedded systems. The S08 architecture uses an 8-bit CISC-style instruction set and integrates peripherals closely with the processor core. For motor-control designs, the combination of hardware PWM, dead-time insertion, comparators, and programmable gain can reduce software timing dependence and simplify complementary-switch drive implementation. The 48-pin LQFP package also provides a higher pin count than compact 20-pin and 32-pin MCUs, increasing access to peripheral and I/O functions while maintaining a surface-mount assembly format. Typical uses include entry-level brushless DC motor controllers, industrial motor drives, automotive accessories, cooling systems, and compact embedded-control products. The MC9S08MP16VLF is especially relevant where an 8-bit architecture, dedicated PWM channels, analog feedback, and 16 KB of Flash are sufficient without adopting a higher-cost 32-bit processor. Designers should review the MC9S08MP16 series datasheet before assigning pins or designing the power system. In particular, confirm the detailed pin multiplexing, oscillator options, analog-reference requirements, and programming interface against the specific board revision. The device is listed as end of life, so new production designs should also account for availability and lifecycle risk during sourcing review. This product record combines the manufacturer lifecycle status, distributor specifications, an official series datasheet, package information, and practical application guidance. It also distinguishes verified drop-in replacements from unrelated S08 devices, helping engineers evaluate direct replacement options without assuming that similar memory sizes or clock rates guarantee pin compatibility.

RFQ संपर्क
MC9S08MP16VWL - 8-Bit 51.34MHz 16KB Flash MCU | NXP
MC9S08MP16VWL

MC9S08MP16VWL - 8-Bit 51.34MHz 16KB Flash MCU | NXP

NXP MC9S08MP16VWL is an 8-bit HCS08 microcontroller with up to 51.34 MHz CPU operation, 16KB of embedded Flash memory, and a 28-SOIC surface-mount package. It operates from 2.7V to 5.5V, with the published 51.34 MHz performance specified from -40°C to 105°C and up to 40 MHz across -40°C to 125°C. The device combines a compact embedded-control core with Flash storage and integrated peripherals for cost-sensitive industrial and consumer designs. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, I/O, timers, communication interfaces, and supporting control logic on one package. The MC9S08MP16VWL belongs to the HCS08 and S08 microcontroller families, combining an 8-bit processor architecture with embedded Flash and mixed-signal-capable control peripherals. This hierarchy places it between simple fixed-function logic and higher-performance 32-bit processors. The verified feature set identifies an 8-bit HCS08 CPU, an extended instruction set with the BGND instruction, and additional addressing modes for LDHX and STHX. Its maximum operating frequency is 51.34 MHz under the specified 2.7V-to-5.5V conditions. The 16KB Flash configuration supports compact firmware storage, while the 28-SOIC package is available in a 0.295-inch, 7.50mm-width body format according to distributor data. The S08 architecture is suited to control loops, digital monitoring, signal conditioning, communications, and embedded products that need deterministic low-cost processing. Its small package can simplify board assembly in space-constrained equipment, while Flash memory permits firmware updates and configuration tables without external program-memory hardware. The device is specifically identified for stepper-motor processor applications in a retrieved datasheet listing. Because the provided sources do not expose the complete peripheral map, RAM capacity, timer resources, communication ports, electrical limits, or detailed timing information, those values are not inferred here. Designers should consult the MC9S08MP16 series datasheet before allocating pins, selecting decoupling, configuring clocking, or programming the device. This page combines verified product identity, distributor pricing references, sourcing information, and design guidance without filling unverified gaps.

RFQ संपर्क
MC9S08PA16AVTJ - 8-Bit 20MHz 16KB Flash MCU | NXP
MC9S08PA16AVTJ

MC9S08PA16AVTJ - 8-Bit 20MHz 16KB Flash MCU | NXP

The NXP Semiconductors MC9S08PA16AVTJ is an 8-bit S08 microcontroller operating at up to 20 MHz with 16 KB of flash memory, supplied in a 20-pin TSSOP package. According to the MC9S08PA16 series datasheet, it operates across a 2.7 V to 5.5 V supply range and is designed for cost-sensitive automotive and embedded-control designs. The device combines an integrated analog and peripheral set with low-power characteristics and a compact 20-TSSOP footprint. Its S08 architecture is supported by the broader NXP embedded ecosystem, including the MC9S08 family reference manual and development resources. The target part is identified by the “AVTJ” ordering suffix, which is associated with the automotive V-temperature range described in the manufacturer documentation. An 8-bit MCU is a microcontroller optimized for control-oriented tasks rather than high-throughput computing. It sits within the embedded-control hierarchy: MCU -> 8-bit microcontroller -> S08 core -> semiconductor. MC9S08PA16AVTJ is intended for applications that require modest processing performance, deterministic peripheral control, and low system complexity. Its 20 MHz bus operation provides a practical balance between response time and power consumption, while 16 KB of flash supports embedded firmware storage for compact control products. Key features include the S08 core, 20 MHz maximum bus frequency, 16 KB flash memory, and operation from 2.7 V to 5.5 V. The family documentation also describes integrated analog functionality and configurable port drive behavior. The V-temperature variant is specified for operation from -40 °C to 105 °C, making it suitable for automotive environments where extended temperature capability is required. The 20-pin TSSOP package supports compact PCB layouts and automated manufacturing. Typical applications include automotive body and accessory control, small motor or actuator controllers, sensor conditioning, keypad interfaces, and compact embedded systems. The MCU is useful when a product needs automotive-oriented documentation, low-power operation, analog integration, and a small package without a high-end Cortex-M processor. Firmware developers can use the S08 family toolchain and reference materials rather than treating the device as a conventional general-purpose MCU. A key design consideration is confirming the exact pinout, peripheral availability, and electrical limits for the AVTJ ordering variant against the MC9S08PA16 datasheet before layout release. Automotive designs should also account for transient protection, grounding, decoupling, and validation across temperature and supply ranges. This page summarizes verified manufacturer and distributor information and clearly identifies data that requires confirmation before production use.

RFQ संपर्क
MC9S08PA16VLC - 8-Bit S08 MCU 16KB Flash 32-LQFP | NXP
MC9S08PA16VLC

MC9S08PA16VLC - 8-Bit S08 MCU 16KB Flash 32-LQFP | NXP

The NXP MC9S08PA16VLC is an 8-bit S08 family microcontroller based on the HCS08L core, integrating 16KB of flash memory, 2KB of RAM and an integrated LCD driver, housed in a 32-pin LQFP (7x7 mm) surface-mount package. It operates at up to 20MHz bus clock, with a 2.7V to 5.5V supply range, making it well suited for battery-powered portable applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (flash), data memory (RAM), and a rich set of peripherals such as timers, ADCs, communication interfaces and I/O ports. The S08 family is NXP's 8-bit HCS08 line, optimized for cost-sensitive, low-power embedded designs that require deterministic real-time response. Within the broader taxonomy, MC9S08PA16 belongs to the HCS08 -> 8-bit MCU -> microcontroller -> embedded IC -> semiconductor hierarchy. Key features include an on-chip 12-channel 12-bit ADC, an analog comparator, a motor-control FlexTimer, multiple low-power modes with wake-up sources, an internal clock source, and a hardware CRC engine. The integrated LCD driver supports up to 4x24 segments without external charge-pump components, reducing BOM cost for human-machine interface (HMI) applications. Architecturally, the PA16 uses a von Neumann bus with a 20MHz HCS08L core, dual-clock FLL with internal 31.25kHz reference, and an integrated voltage regulator for the core logic. Peripherals are mapped into a unified address space; the ROM-resident bootloader allows in-application flash programming via the SCI or SPI peripherals, easing field firmware updates. Typical applications include battery-powered HMI devices, low-end motor control, white-goods control panels, simple sensor hubs, and industrial control nodes. The wide 2.7V-5.5V supply enables direct operation from a single-cell Li-ion or two-AA battery stack. When designing with this MCU, route the VDDA/VSS pair with a 0.1uF ceramic bypass capacitor placed within a few millimeters of the pins, follow the recommended decoupling network from the reference manual, and respect the absolute maximum 5.8V supply limit to avoid latch-up. Pin assignments for the 32-LQFP package are detailed in the device datasheet. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes for the MC9S08PA16VLC that complement the NXP datasheet and reference manual.

RFQ संपर्क
MC9S08PA16VLD-FR - 8-bit S08 MCU 16KB Flash QFP-44 | NXP
MC9S08PA16VLD-FR

MC9S08PA16VLD-FR - 8-bit S08 MCU 16KB Flash QFP-44 | NXP

The NXP MC9S08PA16VLD-FR is an 8-bit S08 central processor unit (CPU) microcontroller with 16KB of Flash memory, designed for cost-sensitive embedded applications in industrial and consumer markets. According to the NXP datasheet, the device runs at up to 20 MHz bus speed across a 2.7V to 5.5V supply, integrating EEPROM, ADC, analog comparator, and a motor-control FlexTimer on-die. The -FR suffix indicates tape-and-reel packaging for high-volume assembly. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (typically Flash), RAM, and a rich set of peripherals including timers, ADCs, and communication interfaces. The S08PA family sits within NXP's broader HCS08 / S08 microcontroller hierarchy, which targets low-power, deterministic, and cost-optimized designs where 32-bit performance is not required. The S08PA family is the affordable, 5V-tolerant evolution of the legacy HC08 and S08 cores, with a focus on EFT/ESD robustness, integrated EEPROM for parameter storage, and analog-rich peripherals that compete directly with Microchip PIC16/18 and Atmel/Microchip AVR devices. Key specifications include 16KB program Flash, 1KB RAM, 128B EEPROM, an internal clock source, multiple timers including the FlexTimer for motor control, and a 10-channel 12-bit ADC. The device operates over -40C to +105C and is offered in a 44-pin LQFP (VLD) package designed for hand-solder-friendly prototyping as well as high-volume SMT production. A built-in analog comparator and a configurable interrupt controller reduce external component count for typical sensor and motor-control applications. Architecturally, the S08PA core is a von-Neumann-style 8-bit CPU with a 16-bit index register and a stack pointer, executing the same S08 instruction set used across the HCS08 family. Reuse of the existing S08 core, IP, and tools means code, compilers (CodeWarrior, GCC for S08), and in-circuit debuggers migrate freely between PA, PT, and PL family devices, simplifying product-platform development. Typical applications include BLDC and brushed-DC motor control in small appliances and fans, sensor interfaces in white goods and HVAC, lighting controls, low-end user-interface panels, and any cost-sensitive industrial sensor node that benefits from on-chip EEPROM parameter storage. The wide 2.7V-5.5V supply tolerates 3.3V logic or 5V rails directly from battery packs or rectified mains. When designing with this MCU, allocate the unused ADC channels to product-feature expansion, plan for an external 32.768 kHz crystal if precise time-of-day is required, and reserve one GPIO for an LED-status or fault indicator. Decouple VDD/VSS with a 100nF X7R capacitor placed within a few millimeters of the package pins. This page synthesizes distributor pricing for the MC9S08PA16VLD-FR, drop-in alternatives from the S08P family and cross-brand competition, and practical design notes not found in the manufacturer datasheet alone.

RFQ संपर्क
MC9S08PA16VTG - 8-bit 20MHz S08 MCU, 16KB Flash | NXP
MC9S08PA16VTG

MC9S08PA16VTG - 8-bit 20MHz S08 MCU, 16KB Flash | NXP

The NXP MC9S08PA16VTG is an 8-bit microcontroller based on the S08 core, operating at up to 20 MHz with 16 KB of on-chip Flash memory, 2 KB of RAM, and 256 bytes of EEPROM, housed in a 16-pin TSSOP package. It supports a wide 2.7 V to 5.5 V supply range and provides 14 general-purpose I/O pins, an internal clock source, and the standard S08 peripheral set including ADC, PWM, timers, and an analog comparator. What is an 8-bit microcontroller? An 8-bit microcontroller (MCU) is a single-chip processor with an 8-bit data path, integrated Flash program memory, RAM, and peripherals such as timers, ADCs, and communication interfaces. MCUs sit at the bottom of the embedded computing hierarchy - microcontroller -> embedded controller -> processor -> computing platform - and are commonly used to replace discrete logic in appliances, motor drives, and consumer electronics where deterministic, low-cost control is required. The S08 core is NXP's 8-bit architecture that evolved from the HC08, optimized for low power and motor-control peripherals. Key features of the MC9S08PA16VTG include 16 KB Flash with in-system programming, hardware EEPROM emulation, a 12-channel 10-bit ADC for analog sensing, two analog comparators, a FlexTimer for motor control PWM, and enhanced ESD/EFT performance designed for harsh industrial environments. The 16-pin TSSOP gives 14 usable I/O pins when using the internal oscillator, while the 5 V I/O tolerance simplifies interfacing to 5 V sensors and actuators without level shifters. The device integrates an internal clock with FLL stabilization, reducing BOM cost by eliminating an external crystal in many applications. Its peripheral set - PWM, timers, ADC, analog comparator, and on-chip communication - is mapped to specific pins documented in the device datasheet, and the part reuses existing S08 peripherals and development tools (CodeWarrior IDE, S08 Flash programmers, freescale/NXP P&E tools) for migration from earlier S08 designs. Typical applications include BLDC/PMSM fan and small-motor control, white-goods and appliance control boards, LED lighting controllers, sensor interfaces with on-chip ADC, and low-cost industrial control boards. The 5V-tolerance and EFT/ESD robustness make it especially suitable for white goods where the control board sits near high-voltage switching sections. A key design consideration is the choice of internal vs. external clock: the internal reference with FLL is sufficient for UART timing at modest baud rates, but designs that need accurate CAN, USB, or high-speed UART timing benefit from an external crystal. Power dissipation in TSSOP-16 at 20 MHz is well below 100 mW and rarely requires thermal analysis. This page synthesizes distributor pricing, drop-in alternatives within the S08 family, and practical design notes not found in the manufacturer datasheet at a glance.

RFQ संपर्क
MC9S08PA16VTJ - 8-bit S08 MCU 16KB Flash 20-TSSOP | NXP
MC9S08PA16VTJ

MC9S08PA16VTJ - 8-bit S08 MCU 16KB Flash 20-TSSOP | NXP

The NXP MC9S08PA16VTJ is an 8-bit S08 microcontroller from the S08PA family, integrating 16 KB of flash, an HCS08L central processor unit, and rich analog peripherals in a 20-pin TSSOP package. Operating up to 20 MHz bus across 2.7 V to 5.5 V and -40 °C to 105 °C, it is engineered for cost-sensitive 5 V embedded systems that still require strong EFT/ESD performance and on-chip analog. An S08 microcontroller is an 8-bit microcontroller built around Freescale/NXP's HCS08 CPU core. It belongs to the broader microcontroller (MCU) category inside embedded computing, and sits within the S08 family hierarchy S08PA -> S08P -> S08 -> HC08. The HCS08L variant of the S08 family targets low-power and high-noise-immunity applications using a 5 V native process, making it well suited to industrial and appliance environments. Key features of the MC9S08PA16VTJ include an internal clock generation block with FLL, up to 16 KB flash with EEPROM-style emulation, on-chip 12-bit ADC, an analog comparator, a FlexTimer supporting motor-control PWM, multiple low-power modes (Wait and Stop), and a multi-source interrupt controller with up to 40 sources and four-level nesting. The integrated bandgap reference and trimmable internal oscillator reduce external component count. The device uses the S08 instruction set, which is source- and object-compatible with the legacy HC08 family, easing legacy code reuse. A BDM (Background Debug Mode) interface and on-chip debug logic enable in-circuit programming and non-intrusive debugging, while the COP watchdog and hardware CRC add safety for white-goods and motor control designs. Typical applications include BLDC and PMSM motor control (small fans, pumps, e-bike accessories), major home appliances (washing machines, dishwashers, refrigerators), industrial sensor signal conditioning, low-end HVAC fan controllers, and 5 V general-purpose control boards. The part is well matched to designs requiring a 5 V native MCU with 12-bit ADC accuracy above that of typical 3.3 V ARM Cortex-M0 parts. Designers should pay attention to decoupling: place 100 nF plus bulk capacitors directly at VDD/VSS, keep ADC analog supply well isolated from switching MOSFET returns, and verify ESD/EFT compliance at the system level because the device's IEC-style ratings depend strongly on PCB layout. S08PA family variants in the same 20-pin TSSOP footprint allow flash size and peripheral scaling without PCB rework. This page synthesises verified distributor pricing, NXP datasheet parameters, and pin-compatible S08 family alternatives into one decision-ready sheet that goes beyond what Mouser, DigiKey, or Octopart show individually.

RFQ संपर्क
MC9S08PA16VWJ - 8-Bit 20MHz 16KB S08 MCU | NXP
MC9S08PA16VWJ

MC9S08PA16VWJ - 8-Bit 20MHz 16KB S08 MCU | NXP

The NXP Semiconductors MC9S08PA16VWJ is an 8-bit S08 microcontroller operating up to 20 MHz, with 16 KB of Flash program memory and analog sensing and PWM output, in a 20-pin SOIC package. It belongs to the MC9S08PA16 family, combining a compact 8-bit core with embedded analog and timing resources for cost-sensitive embedded control. An 8-bit microcontroller is a programmable semiconductor containing a processor core, memory, and peripheral interfaces on one integrated circuit. The S08 architecture uses a compact instruction set suited to appliance controls, sensor nodes, motor-control functions, and other embedded systems. Within the product hierarchy, the MC9S08PA16VWJ is an S08-family microcontroller, an 8-bit MCU, and a member of the broader embedded semiconductor category. Key device attributes include a maximum operating frequency of 20 MHz, 16 KB of Flash memory, 3.3 V and 5 V operation, PWM output, analog sensing, EEPROM capability, and an analog comparator. These resources allow a design to combine control logic with sensor conditioning or programmable waveform generation. The 20-pin SOIC package also supports conventional surface-mount assembly and provides a practical upgrade path for compact industrial and consumer equipment. The S08PA16 series integrates the core, Flash program memory, data EEPROM, timers, serial communication, and analog peripherals to reduce external component count. The manufacturer describes the family as supporting industrial and consumer applications, while the datasheet identifies operating characteristics for an ambient temperature range of -40°C to 105°C. Exact ADC resolution, RAM capacity for this exact ordering code, and all peripheral mapping details should be confirmed in the MC9S08PA16 Series Data Sheet before firmware and PCB sign-off. Typical applications include small motor controllers, industrial sensor interfaces, temperature-control products, compact power-management controllers, consumer appliance controls, and low-cost embedded nodes. PWM is useful for actuator or drive-control functions, while analog sensing supports measurements from resistive sensors. The 20 MHz S08 core provides additional control headroom for protocols, status handling, and supervisory logic around the primary application. PCB implementation should preserve the manufacturer’s recommended decoupling and clock-network layout, especially when ADC channels or PWM outputs are used. Use the datasheet pin-description table for exact port multiplexing and alternate-function assignments, and verify the selected crystal or internal-clock configuration against the required operating frequency. Firmware should also account for the nonvolatile-memory endurance and programming characteristics of the S08PA16 family. This product summary combines the manufacturer’s device description with the S08PA16 data sheet and reference-manual structure to clarify memory, speed, packaging, and application fit. It also distinguishes the 20-pin SOIC MC9S08PA16VWJ from other package variants so engineers can identify a device that matches both the PCB footprint and firmware requirements.

RFQ संपर्क
MC9S08PA32VLD - 8-Bit 20MHz 32KB Flash MCU | NXP
MC9S08PA32VLD

MC9S08PA32VLD - 8-Bit 20MHz 32KB Flash MCU | NXP

The NXP Semiconductors MC9S08PA32VLD is an 8-bit S08 microcontroller rated at 20 MHz, with 32 KB of flash memory and a 44-LQFP 10 x 10 mm package. It belongs to the NXP S08PA family, a 5 V microcontroller platform that combines the established S08 core with integrated EEPROM, analog-to-digital conversion, an analog comparator, and a motor-control flexible timer. These resources support compact control systems that need deterministic 8-bit processing without the complexity of a higher-performance processor. A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals into one device. Within the electronics hierarchy, the MC9S08PA32VLD is an embedded microcontroller, an 8-bit MCU, a semiconductor, and a member of the NXP S08 product family. Its combination of flash program memory, mixed-signal peripherals, and timer resources makes it suitable for appliance control, motor-related functions, basic signal measurement, and compact industrial equipment where deterministic control and low system complexity are priorities. The 20 MHz S08 core provides the primary processing performance, while 32 KB of flash stores the application program. The family integration described by NXP includes EEPROM, an ADC, an analog comparator, and a motor-control flexible timer, reducing the number of external components in a typical embedded design. The S08PA family also emphasizes reuse of existing S08 core intellectual property and tools, which can simplify migration from established S08 products and help preserve software investment. The MC9S08PA32VLD is specifically offered in a 44-pin LQFP measuring 10 x 10 mm. Its gull-wing lead geometry supports conventional surface-mount assembly and provides generous spacing between pins compared with fine-pitch packages. The industrial temperature designation and industrial terminal configuration make it appropriate for controlled equipment environments, subject to final system qualification and operating-limit verification. Typical uses include small motor-control and actuator-control systems, analog monitoring equipment, appliance controllers, and compact embedded products requiring an ADC or comparator. The motor-control flexible timer can generate deterministic timing relationships for motor drive functions, while the ADC and comparator support sensing and threshold decisions. For applications requiring extensive connectivity, high memory density, or a modern high-performance core, a larger MCU family may be a better architectural choice despite the S08PA's simplicity. The main design consideration is software and peripheral migration. Because this is an 8-bit MCU, interrupt latency, memory architecture, and available peripheral resources must be evaluated against the control loop rather than compared directly with 16-bit or 32-bit devices. Designers should also confirm the electrical limits, oscillator arrangements, pin multiplexing, and programming requirements in the manufacturer datasheet before releasing the PCB for production. This product guide combines the manufacturer family description with practical comparisons, application guidance, sourcing information, and engineering design notes. It helps teams evaluate the MC9S08PA32VLD as a 32 KB-flash, 20 MHz, 44-LQFP control platform while keeping package compatibility, lifecycle status, and migration constraints explicit.

RFQ संपर्क
MC9S08PA32VLF - 8-bit S08 MCU 32KB Flash 48-LQFP | NXP
MC9S08PA32VLF

MC9S08PA32VLF - 8-bit S08 MCU 32KB Flash 48-LQFP | NXP

The NXP MC9S08PA32VLF is an 8-bit microcontroller based on the S08 core running at up to 20 MHz, with 32 KB of Flash memory, integrated EEPROM, and a 48-pin LQFP (7x7 mm) surface-mount package. It belongs to the 5 V S08PA family, which integrates key features such as EEPROM, an ADC, an analog comparator, and a motor-control FlexTimer to simplify design and reduce total system cost. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory, data RAM, and peripherals on one die. Within the embedded-systems hierarchy, the S08PA sits in the low-cost, general-purpose 8-bit MCU class below NXP's 32-bit Kinetis and S12 families, targeting cost-sensitive control tasks in appliances, motor drives, and automotive body electronics. Key features of the MC9S08PA32VLF include 32 KB (32K x 8) of on-chip Flash, an S08 central processor unit with efficient C-friendly instruction set, up to 20 MHz bus operation, and excellent EFT/ESD robustness highlighted by NXP for the S08P family. The integrated EEPROM eliminates the need for an external nonvolatile memory device, and the FlexTimer supports PWM generation for motor control. Architecturally, the S08 core is an enhanced, fully upward-compatible descendant of the HC08 architecture, reusing proven IP and development tools. This makes migration from existing 8-bit S08 designs straightforward: the S08P family is scalable and pin-compatible across flash densities, so a board designed around the 32 KB part can later adopt 16 KB or 60 KB variants without PCB rework. Typical applications include small motor control (fans, pumps, power tools), appliance control panels, battery chargers, lighting control, and automotive body or comfort modules where a 5 V supply domain is standard. A key design consideration is lifecycle: NXP lists the MC9S08PA32VLF as NRND (Not Recommended for New Designs), so new projects should evaluate the pin-compatible S08P siblings or plan an end-of-life migration path before committing. This page synthesizes distributor inventory data, family cross-references, and drop-in alternative analysis not found in the manufacturer datasheet alone.

RFQ संपर्क
MC9S08PA32VQH - 8-bit S08 MCU 32KB Flash QFP-64 | NXP
MC9S08PA32VQH

MC9S08PA32VQH - 8-bit S08 MCU 32KB Flash QFP-64 | NXP

The NXP MC9S08PA32VQH is an 8-bit S08 CISC microcontroller with 32KB of Flash memory, housed in a 64-pin PQFP (QFP-64) package and operating from 3.3V/5V supply rails. It belongs to the S08PA family and is offered by NXP Semiconductors (formerly Freescale) with a lifecycle status reported as NRND (Not Recommended for New Designs). A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one silicon die. The 8-bit S08 CISC core executes a complex instruction set targeting cost-sensitive, deterministic embedded applications. Within the broader taxonomy, this device sits as: microcontroller -> 8-bit MCU -> S08 family -> S08PA sub-family -> power-conscious 5V general-purpose tier. The S08PA family reuses the legacy S08 core, toolchain, and IP, allowing easy migration from earlier 8-bit S08 products while integrating modern analog and timer peripherals. Key features of the MC9S08PA32VQH include on-chip EEPROM, an analog-to-digital converter (ADC), an analog comparator, and a motor-control FlexTimer. The device is positioned as a simple yet powerful MCU with excellent EFT/ESD performance, making it suitable for harsh industrial and appliance environments. The integrated FlexTimer is specifically designed for motor-control PWM generation, while the analog comparator and ADC support mixed-signal feedback loops. The S08PA architecture pairs the well-known HCS08 instruction set with an efficient peripheral set, allowing developers to leverage existing S08 code, libraries, and development tools. The 64-pin PQFP package offers a generous pin count for applications that need multiple PWM channels, communication buses, and analog inputs. The device supports both 3.3V and 5V operation, simplifying integration into legacy 5V systems as well as modern 3.3V designs. Typical applications include BLDC and brushed DC motor control, home appliances, industrial control panels, HVAC fan control, low-end lighting controllers, and small-form-factor sensor interfaces. Its combination of EEPROM, ADC, analog comparator, and FlexTimer is well matched to closed-loop motor control and analog-front-end analog measurement tasks. When designing with this part, verify that the current firmware and toolchain versions still support the S08PA family given the NRND status. Confirm long-term supply through NXP or authorized distributors before committing to new designs. This page synthesizes distributor pricing, drop-in alternatives from the S08PA pin-compatible family, and practical design notes not found in the manufacturer datasheet.

RFQ संपर्क
MC9S08PA4AVSC - 20MHz 8-Bit MCU with 4KB Flash | NXP
MC9S08PA4AVSC

MC9S08PA4AVSC - 20MHz 8-Bit MCU with 4KB Flash | NXP

NXP Semiconductors MC9S08PA4AVSC is an 8-bit S08 microcontroller with a 20 MHz CPU, 4 KB program flash, integrated EEPROM, an integrated low-dropout regulator, and an 8-pin SOIC package. It operates from 2.7 V to 5.5 V across the specified operating-temperature range and supports as many as 40 interrupt or reset sources with up to four levels of nested interrupts. An 8-bit microcontroller is a programmable semiconductor containing a central processing unit, memory, timers, analog peripherals, and communication interfaces on one integrated circuit. The S08PA belongs to the microcontroller hierarchy, combining a cost-sensitive embedded CPU core with mixed-signal and timing resources. Within NXP’s S08 family, this device provides a compact platform for simple control, sensing, and actuator-management designs without requiring an external memory or regulator. The MC9S08PA4 includes 4 KB of flash for program storage and integrated EEPROM for data that must survive power loss. Its analog resources include an ADC and analog comparator, while the timer resources support motor-control-oriented applications. The integrated regulator simplifies power architecture, and the 20 MHz maximum bus rate provides useful processing margin for responsive control loops in compact systems. The S08 CPU architecture is designed around an economical embedded instruction set and a peripheral set intended to reduce external component count. Four-level nested interrupt support helps separate time-critical tasks from higher-level foreground and background processing. Because the device is specified for operation from 2.7 V to 5.5 V, it can support both lower-voltage 3.3 V systems and conventional 5 V industrial or consumer equipment when the board-level power design confirms operating limits. Typical uses include small motor controllers, appliance controls, sensor interfaces, compact automation modules, and cost-sensitive embedded products. The 8-pin SOIC-8 package also supports through-hole PCB assembly and automated inspection, making the device suitable for designs that require a small footprint without relying on a fine-pitch surface-mount package. When laying out the board, preserve the manufacturer’s recommended decoupling and programming-interface connections, and do not assume that adjacent pins can carry unrestricted peripheral functions. Confirm the exact multiplexed-pin configuration and programming requirements against the NXP MC9S08PA4 datasheet before assigning functions to the eight available pins. This product overview combines the confirmed operating limits, memory configuration, processor speed, package information, and embedded resources with practical selection and PCB considerations. It also identifies pin-compatible family alternatives and organizes the technical trade-offs needed to decide whether the MC9S08PA4AVSC fits a new embedded-control design.

RFQ संपर्क
MC9S08PA4AVTJ - 20MHz 8-Bit MCU, 4KB Flash | NXP
MC9S08PA4AVTJ

MC9S08PA4AVTJ - 20MHz 8-Bit MCU, 4KB Flash | NXP

The NXP Semiconductors MC9S08PA4AVTJ is an 8-bit S08 microcontroller operating at up to 20 MHz, with 4 KB of flash memory and a 20-pin TSSOP package. Its 2.7 V to 5.5 V operating range makes it suitable for 5 V industrial, automotive, and embedded control systems that require a compact microcontroller with integrated analog peripherals. An 8-bit microcontroller is a compact computing platform that integrates a processor core, program memory, data memory, peripherals, and I/O into one device. The S08PA family combines an economical 8-bit CPU with mixed-signal and timing resources, placing it within the hierarchy of embedded microcontroller, 8-bit MCU, and semiconductor products. This device supports up to 40 interrupt and reset sources and four-level nested interrupts, helping separate time-critical control work from background service routines. Key features include 4 KB of flash, EEPROM, an analog-to-digital converter, an analog comparator, and a motor-control flex timer. The CPU can operate up to 20 MHz across the 2.7 V to 5.5 V supply range. These resources support compact designs that require digital control alongside analog measurement or motor-related timing without adding separate analog or timer ICs. The MC9S08PA4AVTJ belongs to the NXP S08PA family, which is designed around a reusable 8-bit core, peripheral IP, and development tools. The manufacturer describes the family as scalable and pin-compatible, simplifying migration within compatible S08PA products. Its integrated analog comparator and ADC support threshold supervision, sensor interfaces, and mixed-signal control, while the motor-control flex timer improves deterministic timing for motor and actuator systems. Typical applications include automotive body and auxiliary controllers, industrial sensor nodes, appliance control boards, motor-control modules, and compact 5 V embedded systems. A 20-pin TSSOP package reduces board footprint while retaining dedicated I/O, communications, timing, and analog functions. The device is particularly appropriate when legacy S08 software, application notes, and established development workflows must be retained. For PCB implementation, follow the pin-description table and recommended decoupling network in the manufacturer datasheet. Keep the 2.7 V to 5.5 V supply within its specified operating range, validate clock and reset behavior across temperature, and route analog inputs away from switching nodes. The active manufacturer listing supports ongoing sourcing, although current availability should be confirmed through the Request a Quote form. This page combines the manufacturer specifications, lifecycle status, pricing reference, pinout access, and engineering guidance for the MC9S08PA4AVTJ. It also identifies the verified same-family migration option and explains where application-specific validation remains necessary before production release.

RFQ संपर्क
MC9S08PA4MTG - 8-Bit 20MHz 5V MCU with EEPROM | NXP
MC9S08PA4MTG

MC9S08PA4MTG - 8-Bit 20MHz 5V MCU with EEPROM | NXP

The NXP Semiconductors MC9S08PA4MTG is an 8-bit S08 microcontroller with a 20 MHz maximum bus frequency, 5 V operating supply, 4 KB of flash memory, and a 16-pin TSSOP package. It is designed for compact embedded-control systems requiring integrated EEPROM, an analog-to-digital converter, an analog comparator, and a motor-control flex timer. The core operates across a 2.7 V to 5.5 V supply range and supports as many as 40 interrupt and reset sources. An 8-bit microcontroller is a programmable semiconductor integrating a CPU, memory, and peripherals into one device. The S08 core belongs to the broader microcontroller and embedded-processor hierarchy, combining compact code execution with dedicated analog, timing, communication, and data-storage functions. The MC9S08PA4MTG extends this architecture with EEPROM, ADC, analog comparator, and motor-control flex timer blocks, reducing the number of external components required in cost-sensitive embedded products. The 20 MHz maximum bus speed supports faster control-loop execution than slower general-purpose 8-bit devices. The 4 KB flash program memory provides space for firmware, while integrated EEPROM supports nonvolatile data retention. The ADC and analog comparator allow the device to monitor analog inputs and implement threshold decisions without relying exclusively on an external sensing circuit. The S08PA family supports as many as 40 interrupt and reset sources and up to four levels of nested interrupts. This interrupt structure helps software prioritize time-sensitive motor-control events, timer activity, and external conditions. The motor-control flex timer consolidates timing functions needed for motor-drive and other periodic-control systems, reducing firmware complexity and peripheral duplication. Typical uses include small motor controllers, appliance controls, industrial sensing modules, and compact consumer products operating from a 5 V rail. The 16-pin TSSOP package supports surface-mount assembly, while the 2.7 V to 5.5 V operating range provides flexibility across 3.3 V and 5 V systems. Firmware development can build on the established S08 core and related development tools. Designers should review the MC9S08PA4 data sheet for the exact pin functions, electrical limits, timing values, and peripheral configuration. In particular, ADC sampling, timer pin assignments, oscillator options, and the supply current of unused peripherals must be checked against the target application before finalizing the PCB and firmware. This page consolidates the manufacturer specification, package information, sourcing details, and practical application guidance for MC9S08PA4MTG. It also distinguishes documented device characteristics from parameters requiring an engineering decision, helping teams evaluate the MCU before schematic capture, firmware development, and production sourcing.

RFQ संपर्क
MC9S08PA4VTG - 8-bit S08 MCU, 4KB Flash, 16-TSSOP | NXP (Tape & Reel)
MC9S08PA4VTG

MC9S08PA4VTG - 8-bit S08 MCU, 4KB Flash, 16-TSSOP | NXP (Tape & Reel)

The NXP MC9S08PA4VTG is an 8-bit S08 microcontroller built around the S08 central processor unit (CPU), delivering up to 20 MHz bus speed across a 2.7 V to 5.5 V operating range, packaged in a 16-pin TSSOP. It integrates 4 KB of flash program memory, 128 bytes of EEPROM, and 14 general-purpose I/O pins, with integrated LIN physical layer, PWM, and a watchdog timer for robust embedded control. The device supports up to 40 interrupt/reset sources and four-level nested interrupts, enabling real-time response in cost-sensitive automotive and industrial designs. An 8-bit microcontroller (MCU) is a programmable processor that executes instructions 8 bits at a time, optimized for low cost, deterministic timing, and ease of use in motor control, sensor reading, and human-machine interface applications. Within the broader semiconductor taxonomy, the MC9S08PA4VTG sits in the MCU -> 8-bit MCU -> automotive-grade MCU hierarchy. Compared with 16-bit or 32-bit MCUs, 8-bit parts such as the S08 family trade raw computational throughput for simpler peripherals, smaller code footprint, and lower power consumption, which is why they remain widely deployed in body electronics and LIN-bus nodes. Key features of the MC9S08PA4VTG include an S08 CISC core with BDM (Background Debug Mode), 20 MHz maximum bus frequency, brown-out reset and low-voltage detect (LVD) for supply supervision, plus PWM, SCI (UART), SPI, and LIN slave/master connectivity. The integrated LIN 2.1 physical layer makes it a drop-in fit for automotive body networks where discrete LIN transceivers are not required. Internal clock sources include an FLL-stabilized internal reference, reducing external component count for cost-sensitive LIN nodes. The MC9S08PA4VTG is qualified for high-temperature automotive operation up to 125 °C junction temperature and is specified for both 3.3 V and 5 V rails. The 16-TSSOP package provides a small footprint suitable for PCB-constrained body controllers and sensor interfaces, and the AEC-Q100 automotive qualification supports OEM qualification workflows. Typical applications include automotive body control modules, LIN-based sensor nodes, HVAC actuators, lighting control, seat and mirror modules, and low-cost industrial controllers. Designers favor this part where LIN communication, small flash memory, and AEC-Q100 reliability are required simultaneously. When designing with this device, pay close attention to the LIN master/slave role configuration in the SCI module and ensure the BDLC pull-up is correctly biased for in-vehicle network nodes. Decouple VDD with a 100 nF ceramic capacitor placed within 3 mm of the pin. This page synthesizes distributor pricing, drop-in alternatives (including the tape-and-reel vs. tray variants of the same NXP die), and practical design notes not consolidated in the manufacturer datasheet, giving procurement and engineering teams a faster decision path.

RFQ संपर्क
MC9S08PA4VTGR - 8-bit S08 MCU, 4KB Flash, 16-TSSOP | NXP
MC9S08PA4VTGR

MC9S08PA4VTGR - 8-bit S08 MCU, 4KB Flash, 16-TSSOP | NXP

The NXP MC9S08PA4VTGR is an 8-bit S08 microcontroller built around the S08 central processor unit (CPU), delivering up to 20 MHz bus speed across a 2.7 V to 5.5 V operating range, packaged in a 16-pin TSSOP. It integrates 4 KB of flash program memory, 128 bytes of EEPROM, and 14 general-purpose I/O pins, with integrated LIN physical layer, PWM, and a watchdog timer for robust embedded control. The device supports up to 40 interrupt/reset sources and four-level nested interrupts, enabling real-time response in cost-sensitive automotive and industrial designs. An 8-bit microcontroller (MCU) is a programmable processor that executes instructions 8 bits at a time, optimized for low cost, deterministic timing, and ease of use in motor control, sensor reading, and human-machine interface applications. Within the broader semiconductor taxonomy, the MC9S08PA4VTGR sits in the MCU -> 8-bit MCU -> automotive-grade MCU hierarchy. Compared with 16-bit or 32-bit MCUs, 8-bit parts such as the S08 family trade raw computational throughput for simpler peripherals, smaller code footprint, and lower power consumption, which is why they remain widely deployed in body electronics and LIN-bus nodes. Key features of the MC9S08PA4VTGR include an S08 CISC core with BDM (Background Debug Mode), 20 MHz maximum bus frequency, brown-out reset and low-voltage detect (LVD) for supply supervision, plus PWM, SCI (UART), SPI, and LIN slave/master connectivity. The integrated LIN 2.1 physical layer makes it a drop-in fit for automotive body networks where discrete LIN transceivers are not required. Internal clock sources include an FLL-stabilized internal reference, reducing external component count for cost-sensitive LIN nodes. The MC9S08PA4VTGR is qualified for high-temperature automotive operation up to 125 °C junction temperature and is specified for both 3.3 V and 5 V rails. The 16-TSSOP package provides a small footprint suitable for PCB-constrained body controllers and sensor interfaces, and the AEC-Q100 automotive qualification supports OEM qualification workflows. Typical applications include automotive body control modules, LIN-based sensor nodes, HVAC actuators, lighting control, seat and mirror modules, and low-cost industrial controllers. Designers favor this part where LIN communication, small flash memory, and AEC-Q100 reliability are required simultaneously. When designing with this device, pay close attention to the LIN master/slave role configuration in the SCI module and ensure the BDLC pull-up is correctly biased for in-vehicle network nodes. Decouple VDD with a 100 nF ceramic capacitor placed within 3 mm of the pin. This page synthesizes distributor pricing, drop-in alternatives (including the tape-and-reel vs. tray variants of the same NXP die), and practical design notes not consolidated in the manufacturer datasheet, giving procurement and engineering teams a faster decision path.

RFQ संपर्क
MC9S08PA4VWJ - 8-Bit S08 MCU, 4KB Flash, 20MHz, 20-SOIC | NXP
MC9S08PA4VWJ

MC9S08PA4VWJ - 8-Bit S08 MCU, 4KB Flash, 20MHz, 20-SOIC | NXP

The NXP Semiconductors MC9S08PA4VWJ is an 8-bit S08 microcontroller with 4 KB of Flash memory, a 20 MHz bus operating from a 2.7 V to 5.5 V supply, and a 20-pin SOIC package. It is designed for cost-sensitive embedded control in appliances, small motor drives, lighting, and low-cost industrial nodes where an on-chip 12-bit ADC, analog comparator, and EEPROM simplify the bill of materials. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory, data memory, and peripherals such as timers, serial interfaces, and analog converters. The S08 core sits inside the broader hierarchy of embedded controllers: MCU -> 8-bit microcontroller -> S08 family -> S08P scalable platform. The S08P family reuses the same core, IP, and development tools across pin-compatible members, which makes migration between density grades straightforward. Key features of the MC9S08PA4VWJ include an 8-bit S08 central processor unit running up to 20 MHz, 4 KB of program Flash, an integrated 12-bit analog-to-digital converter, an analog comparator, EEPROM data memory, and a motor control Flex Timer Module. The device supports up to 40 interrupt and reset sources with up to four levels of nested interrupts, allowing real-time responses without software polling overhead. The device is specified across a 2.7 V to 5.5 V operating supply range, which covers both 3.3 V and 5 V system rails, and the extended temperature option supports -40 degrees C to +105 degrees C industrial ambient conditions. Because the S08P platform is a scaled 5 V family, the on-chip voltage regulator and bus clocking are designed for reliable 5 V operation rather than low-voltage micro-power duty cycles. Typical applications include small brushless DC motor controllers, fan and pump speed controls, appliance user interfaces, LED lighting drivers, keypad and panel interfaces, and simple sensor conditioning nodes. The ADC plus comparator pairing also suits battery monitoring, thermistor, and potentiometer front ends where a dedicated external converter would otherwise add cost. When designing around this part, remember that the 20 MHz bus speed is guaranteed at 2.7 V and above across the full temperature range, so no derating is needed for industrial environments. Use the pin description table in the manufacturer data sheet for exact ball and pad assignments, and keep the on-chip regulator and decoupling network close to the supply pins to limit switching and analog noise on the ADC reference. This page brings together lifecycle status, package and pin information, drop-in upgrade paths within the S08P family, and practical layout guidance so that engineers can evaluate the MC9S08PA4VWJ against larger-memory alternatives before committing to a board spin.

RFQ संपर्क