माइक्रोकंट्रोलर्स

उत्पाद (20,000+)

BCM2711ZPKFSB06C0T - Quad-Core A72 1.5GHz SoC | Broadcom
BCM2711ZPKFSB06C0T

BCM2711ZPKFSB06C0T - Quad-Core A72 1.5GHz SoC | Broadcom

The Broadcom BCM2711ZPKFSB06C0T is a 64-bit quad-core ARM Cortex-A72 system-on-chip (SoC) running at 1.5 GHz with a VideoCore VI GPU, delivered in a fine-pitch BGA (FBGA) package designed for the Raspberry Pi 4 family of products. This is the exact processor at the heart of the Raspberry Pi 4 Model B and Compute Module 4. A system-on-chip integrates an entire computer - CPU cores, GPU, memory controller, peripheral controllers, and interconnect - onto a single silicon die. SoCs sit at the top of the embedded-computing hierarchy, combining a microprocessor, graphics processor, and microcontroller-class peripherals (GPIO, SPI, I2C, UART, PWM, DMA) into one power-optimized device. The BCM2711 is classified as an application processor / multimedia SoC for embedded and single-board-computer applications. Key features include four 64-bit ARM Cortex-A72 cores with out-of-order execution, hardware H.265 (HEVC) 4Kp60 video decode, dual-display support via two HDMI interfaces at up to 4K resolution, and a substantially upgraded peripheral set over the earlier BCM2837: a PCIe 2.0 lane (used for Gigabit Ethernet via an external LAN controller), native USB 3.0, a redesigned GPIO bank with more flexible alternate functions, and up to 8GB LPDDR4 SDRAM support on the same die via package-on-package memory stacking in end products. Architecturally, the BCM2711 uses an AMBA AXI-compatible interconnect. According to the official BCM2711 ARM Peripherals datasheet, the AXI system does not always return read data in-order; the GPU contains special logic to cope with out-of-order arrivals while the ARM core requires ordered access - a consideration critical for bare-metal OS porting. Peripherals documented in the datasheet include timers, interrupt controller, GPIO, USB, PCM/I2S, DMA controller, and I2C masters. Typical applications are single-board computers (Raspberry Pi 4 Model B), compute modules (CM4), industrial gateways, digital signage and media players leveraging 4Kp60 HEVC decode, and embedded vision or kiosk systems. Design consideration: the BCM2711 requires specific boot media (SPI boot EEPROM plus SD/eMMC) and a regulated core-voltage power tree; thermal design with a heat spreader or heatsink is recommended at sustained CPU load. Verify exact memory-density suffix and package dimensions against the Raspberry Pi technical data sheet before layout. This page synthesizes the manufacturer peripherals documentation, technical data sheet references, drop-in variant analysis, and practical design notes not consolidated in any single manufacturer document.

RFQ संपर्क
BCM2835IPPG - ARM11 700MHz SoC BGA | Broadcom
BCM2835IPPG

BCM2835IPPG - ARM11 700MHz SoC BGA | Broadcom

The Broadcom BCM2835IPPG is a multimedia application SoC integrating an ARM1176JZF-S processor core running at 700 MHz with a VideoCore IV GPU, housed in a small BGA package specified over -40C to +105C ambient. It is the processor at the heart of the original Raspberry Pi single-board computer. A system-on-chip (SoC) combines a CPU core, memory controller, graphics engine, and peripheral interfaces onto a single die, forming the top of the embedded processing hierarchy (SoC -> application processor -> microprocessor -> semiconductor IC). SoCs reduce board area, BOM count, and system power compared with discrete CPU-plus-chipset designs, which is why they dominate cost-sensitive multimedia and embedded Linux platforms. Key features of the BCM2835 include the ARM1176JZF-S core with a floating-point unit and 128 KB or larger L2 cache, the VideoCore IV GPU capable of hardware decode of 1080p30 H.264 video, a hardware ISP for image processing, and an integrated USB 2.0 OTG controller. The device provides 54 GPIO lines and peripheral functions including timers, an interrupt controller, PCM/I2S audio, UART, SPI, and I2C, as documented in the manufacturer datasheet covering Timers, Interrupt controller, GPIO, USB, PCM/I2S (205 pages). Architecturally, the BCM2835 couples the ARM11 CPU to the VideoCore IV graphics and multimedia pipeline through shared SDRAM. The GPU handles boot initialization, graphics acceleration (OpenGL ES 2.0 and OpenVG), and fixed-function video codecs, allowing the CPU to focus on application workloads. The board-level SDRAM interface and peripheral muxing are defined in the BCA ballout documented in the datasheet. Typical applications include single-board computers, embedded Linux HMIs, digital signage players, IP camera and video capture systems, industrial control panels, and educational computing platforms. The hardware H.264 engine and ISP make the part especially well suited to video-centric designs that must remain within a low bill-of-materials budget. Designers should treat the BCM2835IPPG as a board-level design: SDRAM, power rails, clocking, and boot flash must be implemented per the reference schematics in the manufacturer datasheet, and BGA assembly requires controlled-impedance, fine-pitch PCB processes. This page synthesizes distributor stock listings, the 205-page manufacturer datasheet reference, and sourcing notes for the BCM2835IPPG in one place, information not consolidated on any single distributor page.

RFQ संपर्क
BCM2835RIPPG - ARM11 700MHz SoC | Broadcom | Embedded
BCM2835RIPPG

BCM2835RIPPG - ARM11 700MHz SoC | Broadcom | Embedded

The Broadcom BCM2835RIPPG is the BCM2835 system-on-chip (SoC) supplied in the proprietary BGA package identified by the IPPG ordering code. The BCM2835 integrates an ARM1176JZF-S application processor core with a VideoCore IV graphics and multimedia engine, together with timers, an interrupt controller, GPIO, USB, and PCM/I2S peripherals, as described in the manufacturer datasheet. A system-on-chip is a single integrated circuit that consolidates the CPU, GPU, memory controller, and peripheral functions that traditionally occupied multiple chips. SoCs sit at the top of the embedded processing hierarchy (SoC -> microprocessor unit -> integrated circuit -> semiconductor), and the BCM2835 is the device class popularized by the original Raspberry Pi single-board computer, where it handled general-purpose Linux execution plus 1080p-class video decode through VideoCore IV. Key features of the BCM2835 family include the ARM1176JZF-S core, which provides an ARMv6 instruction set, an FPU, and JTAG debug; the VideoCore IV multimedia processor for graphics and video; and a rich peripheral set covering GPIO banks, I2C, SPI, UART, USB 2.0 host/device, and PCM/I2S audio. The IPPG suffix on this MPN identifies Broadcom's packaged ordering option; the specific package dimensions and pin count for this ordering code are not published in the verified data and are marked accordingly in the specifications table. Architecturally, the BCM2835 couples the general-purpose ARM core to a shared memory system and a dedicated multimedia subsystem, allowing Linux workloads and real-time video/audio pipelines to proceed concurrently. Peripheral functions are memory-mapped, and the datasheet documents register-level access for timers, the interrupt controller, GPIO, USB, and PCM/I2S blocks. Typical applications include single-board computers, embedded multimedia players, industrial HMI and kiosk controllers, and educational/prototyping platforms where GPIO plus Linux-class processing are required in one device. A key design consideration is that the ARM1176 is an ARMv6-class core; software stacks must be built for ARMv6 rather than ARMv7/ARMv8, and sourcing for this legacy SoC should be validated early in a project lifecycle. This page synthesizes distributor availability from Octopart and multiple brokers, datasheet provenance, and drop-in-alternative analysis not found on a single manufacturer page.

RFQ संपर्क
BCM2836IFBG - Quad-Core ARM SoC, BGA | Broadcom
BCM2836IFBG

BCM2836IFBG - Quad-Core ARM SoC, BGA | Broadcom

The Broadcom BCM2836IFBG is a quad-core ARM Cortex-A7 system-on-chip (SoC) running at 900 MHz with the VideoCore IV multimedia GPU, supplied in a BGA package. It is the processor used in the Raspberry Pi 2 Model B and integrates the CPU, GPU, SDRAM interface, peripherals, and boot ROM on a single die. A system-on-chip (SoC) is a highly integrated semiconductor that combines the functions of a computer system - processor cores, memory controller, graphics engine, and I/O interfaces - into a single package. Within the product hierarchy, the BCM2836 is an application processor belonging to the Broadcom BCM28xx multimedia SoC family, positioned above general-purpose microcontrollers and below application processors with integrated large DRAM. The BCM2836 succeeded the single-core BCM2835 by replacing the ARM11 core with a quad-core Cortex-A7 cluster, delivering roughly a sixfold increase in CPU throughput while retaining the same VideoCore IV GPU and peripheral set. Key features include four ARM Cortex-A7 cores with NEON SIMD and VFPv4 floating point, a 32 KB L1 instruction/data cache per core, a 512 KB shared L2 cache, the VideoCore IV GPU with 1080p30 H.264 decode capability, and peripheral blocks such as GPIO, UART, SPI, I2C, USB 2.0 (via a hub/LAN9514 companion on Raspberry Pi boards), timers, interrupt controller, and PCM/I2S audio interfaces. Per the public Broadcom BCM2835/BCM2836 peripheral documentation, memory ordering, GPIO, and interrupt architecture are shared across the family, easing software migration from BCM2835 designs. The BCM2836 architecture pairs the Cortex-A7 MPCore cluster with the VideoCore IV graphics pipeline and a shared memory system clocked by an LPDDR2 SDRAM controller. The partitioning allows Linux (Raspbian/Raspberry Pi OS, 32-bit ARMv7) to run on the ARM cores while the GPU handles graphics, camera ISP, and secure boot duties, with firmware-loaded kernel images delivered from the SD card boot flow used in Raspberry Pi products. Typical applications include single-board computers, embedded HMI and digital signage controllers, industrial gateways, and multimedia set-top platforms - use cases that need 1080p video, USB connectivity, and a mature Linux ecosystem on a cost-effective SoC. A key design consideration is thermal and power management: the four Cortex-A7 cores at 900 MHz typically require a 5 V, 2 A-class supply in reference designs, and under sustained multi-core load a heat spreader or airflow is recommended in enclosed enclosures. This page synthesizes distributor sourcing data, drop-in family alternatives, and practical design notes not found in the manufacturer documentation.

RFQ संपर्क
BCM2836RIFBG - Quad-Core Cortex-A7 SoC 900MHz | Broadcom
BCM2836RIFBG

BCM2836RIFBG - Quad-Core Cortex-A7 SoC 900MHz | Broadcom

The Broadcom BCM2836RIFBG is a quad-core ARM Cortex-A7 system-on-chip (SoC) running at 900 MHz with an integrated VideoCore IV GPU, housed in a ball grid array (BGA) package. This SoC is the application processor used on the Raspberry Pi 2 Model B and combines CPU, GPU, memory controller, and multimedia peripherals on a single die. A system-on-chip is an integrated circuit that integrates all major functional blocks of a computing system onto one die: processor cores, graphics acceleration, memory interface, peripheral controllers, and interconnect fabric. SoCs sit at the top of the embedded processor hierarchy (SoC -> application processor -> microprocessor -> semiconductor) and eliminate the need for discrete CPU, GPU, and controller chips in compact designs. Key features of the BCM2836 include four ARM Cortex-A7 cores with NEON SIMD and VFPv4 floating-point units, 32 KiB L1 instruction and data caches per core, and a shared 512 KiB L2 cache. The VideoCore IV graphics core supports 1080p30 H.264 decode and OpenGL ES 2.0-class 3D graphics. Peripheral set includes USB 2.0 host/OTG, 10/100 Ethernet MAC support via companion PHY, UART, SPI, I2C, PWM, and general-purpose I/O banks. The architecture pairs the Cortex-A7 cluster with the proprietary VideoCore IV multimedia engine, connected by an internal bus fabric. Boot code resides in on-chip ROM, with secondary bootloader loaded from external storage such as an SD card. Typical applications include single-board computers, embedded Linux gateways, industrial HMIs, digital signage players, and multimedia IoT nodes requiring 1080p video output. Design consideration: the BCM2836 is supplied under restricted documentation; full electrical and ballout details are available from Broadcom under NDA, so board design should reference the Raspberry Pi 2 reference schematics. This page synthesizes distributor availability, family alternatives, and practical design guidance not found in publicly restricted datasheets.

RFQ संपर्क
BCM2837B0IFSBG - Quad-Core Cortex-A53 SoC BGA | Broadcom
BCM2837B0IFSBG

BCM2837B0IFSBG - Quad-Core Cortex-A53 SoC BGA | Broadcom

The Broadcom BCM2837B0IFSBG is a quad-core ARM Cortex-A53 application processor (SoC) supplied in a BGA package. According to the BCM2837 datasheet from Broadcom, the BCM2837 is an A53 processor built around four 64-bit ARM Cortex-A53 CPU cores integrated with a multimedia GPU and system peripherals on a single die. An application processor SoC is the highest level of integration in the semiconductor hierarchy: within a power-management and computing hierarchy it combines a central processing unit (CPU), graphics processing unit (GPU), memory interfaces, and I/O peripherals into one chip, replacing the multi-chip solutions of earlier embedded boards. SoCs of this class sit above microcontrollers in capability and are the computational heart of single-board computers, embedded media systems, and industrial gateways. Key features of the BCM2837 family include its quad-core Cortex-A53 architecture supporting 64-bit ARMv8-A execution, an integrated multimedia GPU for video and graphics acceleration, and a peripheral set documented in the Broadcom 'BCM2835 ARM Peripherals' manual that also covers the BCM2837 die. The BGA package provides a dense, low-inductance surface-mount interconnect suited to high-speed memory and interface routing. Architecturally, the BCM2837B0 pairs the A53 cluster with Broadcom's VideoCore-class multimedia engine, allowing Linux-based operating systems to run while hardware blocks handle video decode, 3D graphics, and camera input. This split between general-purpose cores and fixed-function accelerators is what made the BCM2837 family the processor of choice for the Raspberry Pi 3 generation of boards. Typical applications include single-board computers, embedded HMI and display systems, industrial IoT gateways, digital signage media players, and networked camera or kiosk designs where a Linux-capable processor with graphics output is required in a compact footprint. A key design consideration with this BGA device is that it is a raw SoC requiring external boot media (SD/eMMC), power rails, and memory configuration; board bring-up must follow the reference schematic in the Broadcom documentation, and reflow assembly requires BGA-capable processes and X-ray inspection. This page synthesizes distributor sourcing data, same-family drop-in cross references, and practical design notes not found in the manufacturer datasheet, providing procurement and engineering context in one place.

RFQ संपर्क
BCM2837RIFBG - Quad Cortex-A53 1.2GHz SoC | Broadcom
BCM2837RIFBG

BCM2837RIFBG - Quad Cortex-A53 1.2GHz SoC | Broadcom

The Broadcom BCM2837RIFBG is a quad-core ARM Cortex-A53 system-on-chip running at 1.2 GHz and delivering approximately 2760 DMIPS per core, housed in a ball grid array (BGA330) package. It is the processor used in the Raspberry Pi 3 family of single-board computers. A system-on-chip (SoC) integrates all major functional blocks of a computing system onto a single silicon die, combining CPU cores, graphics processing, memory interfaces, and peripheral controllers. In the embedded hierarchy, the BCM2837 sits above microcontrollers and below multi-core application processors for mobile devices, targeting cost-sensitive Linux-capable embedded platforms. Key features include four 64-bit ARM Cortex-A53 cores clocked at 1.2 GHz, a Broadcom VideoCore IV GPU capable of hardware-accelerated graphics and 1080p video decode, and a rich peripheral set including USB 2.0, CSI camera and DSI display interfaces, and general-purpose I/O. The 64-bit ARMv8-A architecture allows execution of both 32-bit and 64-bit operating systems, with mainstream Linux support via the Raspberry Pi OS. Architecturally, the BCM2837 couples the quad-core Cortex-A53 cluster to the proven BCM283x peripheral complex originally developed for the BCM2835. This preserves software compatibility with earlier Raspberry Pi generations while multiplying compute throughput roughly tenfold. The VideoCore IV GPU also services camera and display pipelines, offloading video workloads from the CPU cores. Typical applications include single-board computers, industrial IoT gateways, digital signage players, kiosk controllers, HMI panels, and educational computing platforms. Its Linux ecosystem, broad community support, and integrated GPU make it well suited to products that need a full OS with multimedia capability. Design consideration: as a BGA-packaged SoC, the BCM2837RIFBG requires controlled-impedance PCB stackups for LPDDR2 memory routing, precise power sequencing, and careful thermal management, since the processor load can raise die temperature substantially in enclosed enclosures. Refer to the Raspberry Pi Foundation reference designs for proven power-tree implementations. This page synthesizes distributor availability data, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet, with pricing references as of 2026-09-14.

RFQ संपर्क
BCM2837RIFBGT - Quad-Core A53 SoC 1.2GHz | Broadcom
BCM2837RIFBGT

BCM2837RIFBGT - Quad-Core A53 SoC 1.2GHz | Broadcom

The Broadcom BCM2837RIFBGT is a quad-core ARM Cortex-A53 system-on-chip (SoC) running at 1.2 GHz with the Broadcom VideoCore IV GPU, housed in a BGA package and delivered in tape-and-reel format. It is the application processor used in the Raspberry Pi 3 family of single-board computers. A system-on-chip integrates the CPU cores, graphics processor, memory controller, and peripheral interfaces onto a single silicon die, forming the top of the embedded processor hierarchy (SoC -> application processor -> microprocessor -> integrated circuit). In the BCM2837, four 64-bit ARM Cortex-A53 cores provide the general-purpose compute, while the VideoCore IV graphics engine accelerates 2D/3D graphics and video decode, offloading display workloads from the CPU. Key characteristics include 64-bit ARMv8-A architecture with quad-core symmetric multiprocessing, integration of the VideoCore IV GPU supporting HD-class graphics, and a peripheral set historically documented in the Broadcom BCM283x ARM Peripherals datasheet, a 205-page document covering GPIO, UART, SPI, I2C, PWM, USB, and display interfaces. The BCM283x family shares a common register map across BCM2835, BCM2836, and BCM2837, easing software porting across generations. Architecturally, the BCM2837 couples the Cortex-A53 quad cluster to on-chip interconnect and memory subsystems with the VideoCore IV acting as a co-processor for boot, graphics, and multimedia. Raspberry Pi documentation confirms the same silicon die was later repackaged with 512 MB of DRAM as the RP3A0 SiP used in the Raspberry Pi Zero 2 W, underscoring the maturity of the BCM2837 platform. Typical applications include single-board computers and embedded Linux gateways, industrial HMI and digital signage controllers, IoT edge devices, and educational computing platforms. The quad-core A53 delivers sufficient headroom for headless servers, media playback, and networked sensor aggregation. Design consideration: BGA packages demand controlled-impedance PCB stack-ups, precise land patterns, and reflow assembly; plan power distribution and decoupling carefully around the dense ball field, and verify the exact BGA ball count and footprint from the manufacturer package drawing before layout. This page synthesizes distributor pricing, same-family cross-references, and practical design notes not found in the manufacturer datasheet.

RFQ संपर्क
BCM47063SD01 - 3+3GE 11N/11AC WLAN Chipset | Broadcom
BCM47063SD01

BCM47063SD01 - 3+3GE 11N/11AC WLAN Chipset | Broadcom

Broadcom BCM47063SD01 is a 3+3GE WLAN chipset identified for embedded microprocessor applications and described by distributor data as supporting 11N plus 11AC wireless networking in a 3+3 configuration. The component is marketed by Broadcom Limited and is listed by DigiKey as a microprocessor IC. Its exact core architecture, operating frequency, memory configuration, radio integration, package dimensions, pinout, and electrical limits were not present in the verified source data and must therefore be confirmed from the original Broadcom documentation before design release. A WLAN chipset is a specialized embedded semiconductor that integrates the functional elements required to communicate through a wireless LAN. In the product hierarchy, this device is a wireless network processor or embedded connectivity solution rather than a general-purpose CPU. The verified description's 3+3 configuration normally identifies three concurrent radio paths and three spatial streams, while 11N and 11AC identify supported generations of the IEEE 802.11 family. The source snippet does not explicitly define the numerical configuration or provide corresponding throughput figures. The verified Broadcom offering identifies BCM47063SD01 as a 3+3GE WLAN chipset for 11N and 11AC embedded applications. This positions the part in home networking, connected-device, gateway, and embedded-router designs that require concurrent dual-band wireless operation. The GE designation is also supplied by the verified distributor record, although the exact interpretation of the E in GE is not defined in the source and should not be expanded into unsupported Ethernet or radio claims. Because the retrieved records classify BCM47063SD01 as a microprocessor IC, the device is intended to act as an embedded wireless processing platform rather than merely as a standalone analog radio front end. Its processing, memory, host interfaces, RF integration, and software support are fundamental selection criteria. None of those interface or processing details appear in the verified excerpts, so designers should not assume the presence of PCI, Ethernet, USB, DDR, SPI, flash, or any other host interface without checking the manufacturer package documentation. Typical design opportunities include dual-band wireless routers, smart-home gateways, connected appliances, and embedded Wi-Fi systems targeting 802.11n and 802.11ac clients. The 3+3 and 11N/11AC descriptions make those applications directionally relevant, but board-level selection still depends on antenna architecture, regulatory-domain support, reference firmware, driver availability, thermal performance, and the manufacturer-supported development platform. Before schematic capture, obtain the package drawing, complete pin list, exposed-pad requirements, absolute maximum ratings, recommended operating conditions, and hardware-design guidance from Broadcom or an authorized representative. Do not substitute a similarly named Broadcom wireless processor without confirming ball or lead assignment, RF routing, reference design, firmware support, and regulatory certification. The verified distributor search data supports procurement and identification, but it does not provide enough engineering detail to approve a drop-in replacement. This page separates confirmed facts from unavailable data: it uses the supplied 3+3GE, 11N, 11AC, Broadcom, microprocessor, distributor availability, and pricing-search references while marking unverified electrical, package, lifecycle, and mechanical parameters for review. It also adds procurement, comparison, application, and design-validation guidance without inventing specifications that were absent from the supplied evidence.

RFQ संपर्क
BCM47063SF02 - 3+3 802.11ac WLAN Chipset | Broadcom
BCM47063SF02

BCM47063SF02 - 3+3 802.11ac WLAN Chipset | Broadcom

The Broadcom BCM47063SF02 is a 3+3 Gigabit Ethernet WLAN chipset identified by distributor listings as supporting 802.11ac wireless networking. It is supplied by Broadcom Limited, originally associated with Avago Technologies, and is classified as an embedded microprocessor designed for integrated networking equipment. The verified listings identify the device as a 3+3 GE WLAN chipset, but they do not expose the package designation, processor core, clock rate, memory configuration, radio bands, or detailed electrical characteristics. An embedded WLAN chipset combines wireless LAN connectivity with general-purpose processing and often integrates Ethernet interfaces. Within the product hierarchy, the BCM47063SF02 belongs to the embedded microprocessor and wireless networking device categories, while 802.11ac describes the wireless LAN generation supported by the platform. A 3+3 radio configuration normally indicates three spatial streams and three antennas, although the verified sources provide only the condensed 3+3 designation and do not publish additional antenna specifications. The principal verified features are the 3+3 GE WLAN chipset description, 802.11ac support, Broadcom Limited as the manufacturer, and an embedded microprocessor classification. RoHS status is reported as ROHS3 Compliant by one distributor. Distributor records also associate the part with the BCM47063 series, but they do not expose a complete pin list, package dimensions, electrical ratings, or firmware compatibility information. Broadcom BCM47063SF02 devices are positioned for routers, wireless access points, gateways, and similar dual-network equipment where both Gigabit Ethernet and 802.11ac WLAN capability are required. Because public product pages provide limited technical tables, engineers should request the restricted Broadcom datasheet, hardware reference design, software release documentation, and radio calibration information before committing the part to a new layout. Typical deployments include tri-band and dual-band residential gateways, enterprise wireless access points, and connected home equipment that bridges wired Ethernet clients with 5 GHz and 2.4 GHz WLAN traffic. Product qualification should consider regulatory approvals, antenna path requirements, memory support, Linux or RTOS firmware integration, and the availability of matching Broadcom radio components. The critical design consideration is that this is a tightly integrated OEM chipset rather than a general-purpose RF module. PCB layout, antenna matching, thermal design, and firmware support are tightly coupled to Broadcom's reference designs. Engineers must not substitute a generic 802.11ac module without revalidating the host interface, regulatory compliance, antenna network, and driver stack. This page consolidates the verified distributor descriptions, sourcing status, and design implications for BCM47063SF02. It also identifies the technical documentation that must be obtained directly from Broadcom before layout release, because the public search data does not provide complete datasheet-level specifications or verified drop-in replacements.

RFQ संपर्क
BCM47063SN01 - 3x3 11N Gigabit WLAN Chipset | Broadcom
BCM47063SN01

BCM47063SN01 - 3x3 11N Gigabit WLAN Chipset | Broadcom

The Broadcom BCM47063SN01 is a highly integrated 3x3 11N Gigabit WLAN chipset (System-on-Chip) from Broadcom Limited (formerly Avago Technologies), supplied in tray packaging as an ordering code under the base product number BCM47063. It is designed for embedded networking equipment where a single silicon device integrates an 802.11n wireless LAN transceiver, a Gigabit Ethernet (GE) interface and the host processing needed to drive a residential or small-business router, access point or range extender. An embedded WLAN chipset (also called a wireless SoC, radio-on-chip or combo connectivity SoC) is an integrated circuit that merges the RF front end, baseband MAC/PHY and embedded CPU into one package. This integration reduces board area, bill-of-material cost and software complexity versus discrete radio plus host-MCU designs. Within the product hierarchy, BCM47063SN01 sits at the top as a highly integrated connectivity SoC, one level above discrete Wi-Fi front-end modules and two levels above standalone 802.11 transceivers. Verified distribution data identifies the device as a 3x3 11N GE WLAN chipset with ROHS3 compliance, tray package type, an NKESP order code of 73D-BCM47063SN01 and a listed base product number of BCM47063. The 3x3 notation refers to the three spatial streams and three antenna chains the radio supports, and the GE suffix denotes the integrated Gigabit Ethernet port that eliminates an external Ethernet PHY on typical designs. Because Broadcom does not publicly publish a full detailed datasheet for this ordering code, core electrical characteristics such as supply voltage, current consumption, RF output power, operating temperature range, pin count and package dimensions are not verifiable from the sources consulted. These are marked [DATA_NEEDED] in the specification table rather than guessed. Confirmation should be made with Broadcom or the authorised distributor before committing to a new PCB layout. Typical deployments are dual-band and single-band 802.11n residential routers, wireless access points, cable modems and DSL gateways with Ethernet LAN ports, mesh node and range-extender designs, and other embedded networking appliances that require an integrated Wi-Fi plus Gigabit Ethernet solution on a single board. When designing with this part, plan the PCB layout against the approved Broadcom reference design and evaluation kit, keep the RF path free of copper and metal obstructions, and provide the required decoupling and matching network footprint even if the values are only revealed under Broadcom NDA. Treat the RF section as a controlled-impedance, 50 ohm transmission-line layout from the outset, because retrofitting an antenna path after routing is a common source of yield loss. This page consolidates verified distributor availability, RoHS and packaging data, ordering codes, family-level drop-in options and practical RF layout guidance that is normally spread across distributor listings and vendor portals, giving engineers a single reference before committing a board spin.

RFQ संपर्क
BCM47063SO01 - 3x3 11N FE WLAN Chipset | Broadcom
BCM47063SO01

BCM47063SO01 - 3x3 11N FE WLAN Chipset | Broadcom

Broadcom BCM47063SO01 is a 3 x 3 11N FE WLAN chipset classified as an embedded microprocessor and supplied in a tray package. The verified product information identifies the BCM47063 series as a wireless LAN chipset for embedded networking equipment. The BCM47063SO01 ordering code is associated with Broadcom Limited, formerly identified in some listings as Avago Technologies, and is offered by multiple electronics distributors. A WLAN chipset is an embedded semiconductor platform that integrates wireless networking functions for a connected product. Within the product hierarchy, the device belongs to the embedded microprocessor category and ultimately the broader integrated-circuit and semiconductor families. The designation 11N identifies the wireless generation represented by the product, while 3 x 3 describes the published configuration associated with the chipset. The supplied distributor records do not expose the complete radio, antenna, interface, memory, and software requirements. The principal verified feature is the BCM47063SO01's 11N FE WLAN chipset architecture in a compact 3 x 3 configuration. The part is offered with a standard base product number of BCM47063, and one distributor lists the device as RoHS3 compliant. The ordering information identifies tray packaging, while other distributor pages provide purchasing, stock, and cross-reference links. No authoritative manufacturer datasheet was included in the verified search results, so electrical ratings and RF performance remain unconfirmed. As an embedded wireless platform, the BCM47063 series is associated with routers, gateways, access points, and other network equipment requiring 11N-class WLAN connectivity. Such equipment generally requires coordinated support from memory, Ethernet interfaces, clocks, power supplies, radio-frequency components, antenna paths, and embedded software. Because the available records identify the BCM47063 family but do not provide a detailed pin list, no unsupported claim is made about processor architecture, CPU core, RAM, flash, radio bands, or transceiver performance. A key procurement consideration is that the SO01 suffix may identify a specific orderable configuration, but the supplied results do not include a manufacturer ordering guide explaining every suffix. Engineers should therefore compare the complete BCM47063 ordering information, firmware support, regulatory certification, and end-product requirements before releasing a production design. The listing descriptions alone are not sufficient to approve a new router or access-point design. This page consolidates the verified Broadcom identity, 11N FE WLAN chipset classification, 3 x 3 configuration, tray packaging, RoHS3 statement, distributor availability records, and unresolved engineering data into one engineering-oriented reference. It deliberately distinguishes documented information from missing electrical, pinout, pricing, and lifecycle details so procurement and design teams can identify the verification work still required before qualification.

RFQ संपर्क
BCM47081SE03 - 2+2GE 11n/11ac WLAN SoC | Broadcom
BCM47081SE03

BCM47081SE03 - 2+2GE 11n/11ac WLAN SoC | Broadcom

The Broadcom BCM47081SE03 is a 2+2 Gigabit Ethernet WLAN chipset supporting 802.11n and 802.11ac, supplied as a microprocessor IC and identified by distributor listings as an RF system-on-chip. The verified product information establishes the integrated 2+2 Gigabit Ethernet configuration and dual-generation 11n/11ac WLAN capability, but it does not provide a package designation, pin map, core frequency, memory configuration, operating voltage, or detailed radio specifications. A WLAN chipset is an integrated semiconductor platform that combines wireless LAN connectivity with processor and Ethernet functions. In the network-device hierarchy, it sits below the broader category of wireless network controllers and system-on-chip devices. The BCM47081SE03 is therefore intended for embedded networking equipment where multiple Gigabit Ethernet ports and dual-band-capable 802.11n/802.11ac support are required within one communications platform. The principal verified feature is the 2+2 Gigabit Ethernet arrangement, which distinguishes this device from basic Wi-Fi-only embedded chips. Its support for both 802.11n and 802.11ac allows it to address legacy and higher-throughput Wi-Fi clients across consumer, enterprise-access, and service-provider equipment. Broadcom markets the device as a WLAN chipset, while distributor records place it in the microprocessor and network-controller categories. The available listings provide only abbreviated technical descriptions. They do not disclose the processor core, RAM, flash interface, radio bands, antenna interfaces, regulatory approvals, pin assignments, package dimensions, or operating-temperature limits. Consequently, those values are intentionally marked as unavailable rather than inferred from the part number or comparable Broadcom devices. A complete hardware design should use the exact manufacturer documentation supplied by Broadcom under an appropriate confidentiality agreement. Typical implementation areas include wireless routers, gateways, set-top boxes, smart-home access points, and embedded dual-band networking equipment. The integrated 2+2 Ethernet configuration can reduce the need for separate Ethernet interface devices when a board design calls for two wired Gigabit connections alongside WLAN support. Exact suitability still depends on the unavailable driver, interface, regulatory, and hardware documentation. The main design precaution is to obtain the controlled Broadcom documentation before committing PCB resources. Because the public listings do not identify the package or pinout, board layout, power sequencing, antenna integration, thermal design, and software enablement cannot be validated from the supplied evidence alone. This page consolidates verified distributor descriptions, current availability references, sourcing information, and application guidance for BCM47081SE03. It also distinguishes confirmed specifications from unavailable technical details so engineers can make a responsible preliminary sourcing and design assessment.

RFQ संपर्क
BCM47081SF03 - 2+2 802.11ac WLAN SoC | Broadcom
BCM47081SF03

BCM47081SF03 - 2+2 802.11ac WLAN SoC | Broadcom

Broadcom BCM47081SF03 is a 2+2 Gigabit Ethernet WLAN chipset system-on-chip supporting 802.11n and 802.11ac wireless networking. The supplied distributor data identifies the device as a microprocessor IC and specifically describes it as a 2+2 GE WLAN chipset (11n+11ac). These four verified capabilities place it in the broader wireless LAN controller category, where integrated processing and radio-network connectivity support routers, gateways, access points, and similar networking equipment. A wireless LAN SoC is an embedded semiconductor that combines one or more processor functions with dedicated networking and radio-interface logic. Within the product hierarchy, this BCM47081 device is a wireless network controller, embedded microprocessor, system-on-chip, and integrated circuit. Its 2+2 radio configuration supports two spatial streams, while 802.11n and 802.11ac provide the stated WLAN standards required for dual-band Wi-Fi networking systems. The principal verified features of the BCM47081SF03 are its 2+2 radio configuration, 2+2 Gigabit Ethernet WLAN chipset classification, and support for both 802.11n and 802.11ac. These specifications distinguish it from basic single-stream or legacy-only wireless controllers. For equipment designers, the combination indicates a device intended to handle wireless LAN connectivity in comparatively demanding access-point and router platforms. Technically, the chipset integrates embedded processing with WLAN functionality rather than operating only as a simple radio transceiver. The verified distributor listing classifies BCM47081SF03 as a microprocessor IC, while Mouser describes it as an RF system-on-chip. These descriptions support its use as the network-processing centerpiece of a wireless networking product, although processor architecture, clock rate, memory interfaces, radio bands, and firmware details are not present in the supplied source material. Typical applications include dual-band Wi-Fi routers, residential gateways, enterprise wireless access points, and network-attached storage systems using an 802.11ac-capable WLAN chipset. The device may also be evaluated for embedded networking appliances where a 2+2, dual-standard wireless LAN implementation is required. Selection should include verification of the complete datasheet, package drawing, pinout, regulatory approvals, antenna interface, and Broadcom firmware support for the intended product. The most important design step is to obtain the manufacturer documentation before PCB layout because the supplied data does not state the package type, pin count, exposed-pad arrangement, or physical dimensions. Designers should also confirm operating voltage, Ethernet interface details, supported memory, radio front-end requirements, and thermal conditions rather than infer them from the distributor descriptions. A board-level replacement is not interchangeable unless its package, pinout, electrical characteristics, radio interface, and firmware environment all match. This product record combines verified distributor descriptions, availability sources, purchasing information, and cautious engineering guidance. It distinguishes confirmed 2+2 802.11n/802.11ac chipset characteristics from unverified details, helping engineers identify the correct BCM47081SF03 documentation and evaluate replacement options without treating generic cross-reference results as proof of drop-in compatibility.

RFQ संपर्क
BCM47081SG03 - 2+3 GE WLAN 11n+11ac SoC | Broadcom
BCM47081SG03

BCM47081SG03 - 2+3 GE WLAN 11n+11ac SoC | Broadcom

The Broadcom BCM47081SG03 is an RF system-on-chip (SoC) for embedded wireless networking applications, identified by the verified product description as a 2+3 GE WLAN solution supporting 11n and 11ac wireless LAN operation. The part is listed by Broadcom and Avago Technologies distributor records as a microprocessor IC with a Broadcom RF SoC architecture. The available verified source data does not publish the processor core, clock rate, memory configuration, radio bands, antenna interfaces, operating temperature, or exact package dimensions. A wireless SoC combines multiple functions that are normally implemented as separate devices. For this BCM47081SG03, the verified description identifies the product as a 2+3 GE WLAN SoC, with 11n and 11ac support. The 2+3 GE designation is retained exactly as supplied in the distributor records; detailed interpretation of the GE interface arrangement requires the manufacturer datasheet, which was not included in the verified data. The BCM47081SG03 is intended for embedded routers, gateways, wireless access equipment, and other network products requiring integrated 11n/11ac wireless LAN functionality. Its RF SoC classification indicates that the device includes wireless network processing and radio-related functions in one component, reducing the need for separate wireless interface components in the completed product. The verified distributor listings also identify the part as a Broadcom RF System on Chip. Designers should treat the BCM47081SG03 as a highly application-specific component rather than a general-purpose microcontroller. The verified records provide the MPN, Broadcom identity, SoC description, 2+3 GE WLAN designation, 11n and 11ac support, RoHS3 compliance, tray packaging, and distributor availability. They do not provide verified values for pinout, package type, electrical ratings, memory, firmware support, host interfaces, RF certification, or lifecycle status. Before placing this device in a new design, obtain the applicable Broadcom datasheet and confirm the exact package, exposed-pad requirements, pin multiplexing, supply rails, clocking, boot interface, memory support, and regulatory requirements. Those details cannot be safely inferred from a distributor category label. The available information is sufficient for initial sourcing and product-family identification, but not for schematic capture or PCB layout. This page consolidates the verified distributor descriptions, package-format information, sourcing links, and available technical identifiers for BCM47081SG03. It is intended to support engineers evaluating the part for 11n/11ac embedded wireless networking designs while clearly separating confirmed information from manufacturer-document details that still require verification.

RFQ संपर्क
BCM47081SL01 - 2+3GE 11n+11ac WLAN SoC | Broadcom
BCM47081SL01

BCM47081SL01 - 2+3GE 11n+11ac WLAN SoC | Broadcom

Broadcom BCM47081SL01 is an RF system-on-chip and WLAN chipset combining 2+3 Gigabit Ethernet connectivity with 11n and 11ac wireless operation. The verified distributor information identifies this device as a Broadcom networking SoC rather than a general-purpose microprocessor, making it suitable for integrated wireless LAN and multi-gigabit Ethernet equipment. Its package, pin arrangement, core frequencies, memory interfaces, regulatory domains, and detailed electrical limits are not available in the supplied source data and must be confirmed in the manufacturer datasheet before PCB design or production use. A system on chip, or SoC, combines multiple functional blocks such as processors, connectivity controllers, radio interfaces, memory interfaces, and security functions into one integrated device. Within the networking hierarchy, an RF WLAN SoC sits between a discrete processor and a standalone radio, allowing a router, gateway, or access point to reduce component count and simplify board integration. The BCM47081SL01 is specifically identified by Broadcom distributor records as a 2+3GE WLAN chipset supporting 11n and 11ac, combining legacy and faster wireless modes with Gigabit Ethernet-class connectivity. The principal verified feature set includes a 2+3GE Ethernet arrangement, dual-mode 11n and 11ac WLAN support, and an RF system-on-chip architecture. These capabilities position the chipset for home networking, broadband gateways, Wi-Fi access points, and embedded network appliances. The 11ac designation indicates support for the 5 GHz-era wireless standard, while 11n coverage supports established 2.4 GHz and 5 GHz WLAN deployments. The source snippets do not provide channel widths, spatial-stream counts, antenna interfaces, regulatory approvals, or throughput figures, so none are inferred here. BCM47081SL01 is typically integrated into a complete networking platform rather than used alone. Surrounding circuitry includes power supplies, memory, Ethernet magnetics, clocks, RF front-end components, antennas, and configuration interfaces. Its exact memory architecture and I/O requirements cannot be stated from the verified excerpts. Designers should therefore treat the listed 2+3GE and 11n+11ac capabilities as verified device-level facts, while obtaining the complete Broadcom datasheet and reference design before selecting regulators, decoupling, clocking, and PCB land patterns. Typical uses include residential routers, broadband CPE equipment, dual-band wireless access points, and other network appliances that combine wired Gigabit Ethernet with Wi-Fi. The 2+3GE designation may support high-speed network paths, but the exact mapping between 2.5 GbE and 3 GbE interfaces, PHY integration, and external-component requirements remains unverified. Likewise, the 11ac feature does not by itself specify client rate, port count, antenna count, or regulatory compliance. The critical design action is to obtain an authorized Broadcom datasheet and hardware design package before layout. Do not infer a BGA pinout, power pin arrangement, RF routing geometry, or exposed-pad requirements from generic SoC practice. Confirm reference clock sources, DDR or flash interfaces, Ethernet magnetics support, boot configuration, debug access, firmware constraints, and decoupling directly from controlled Broadcom documentation. This page consolidates the verified Broadcom product description, distributor sourcing information, and cautious application guidance while explicitly separating known facts from unavailable data. It also records the absence of independently verified pin-to-pin substitutes, avoiding unsupported drop-in claims for a highly integrated, firmware-dependent WLAN chipset.

RFQ संपर्क
BCM47083SA03 - 3+3 11ac WLAN SoC | Broadcom
BCM47083SA03

BCM47083SA03 - 3+3 11ac WLAN SoC | Broadcom

Broadcom BCM47083SA03 is a 3+3 Gigabit Ethernet WLAN chipset supporting 11ac and identified by the verified distributor data as an RF system-on-chip in the network-controller and processor-IC category. The available source information identifies the device as a Broadcom Limited embedded microprocessor product, while one distributor listing describes it as a 3+3 GE WLAN chipset with 11ac capability. The verified record also identifies a tray package configuration and a manufacturer or distributor datasheet reference named BCM47083SA03.pdf. Detailed electrical ratings, processor architecture, memory configuration, radio interfaces, pin mapping, operating-temperature limits, and package dimensions are not included in the supplied source data and therefore require confirmation from the original manufacturer documentation. A WLAN chipset combines wireless LAN connectivity, Ethernet-facing networking functions, and embedded processing into a single platform. In the product hierarchy, BCM47083SA03 is an embedded microprocessor and RF system-on-chip, and it is associated with network controllers, wireless LAN devices, and Gigabit Ethernet networking equipment. The 3+3 designation indicates three-plus-three Gigabit Ethernet and 11ac positioning as stated by the supplied distributor records, but it should not be interpreted as a complete specification of antenna count, spatial streams, or radio bands without the original datasheet. The supplied records provide sourcing metadata rather than a complete electrical characterization. DigiKey lists the component under Broadcom Limited with orderable part number BCM47083SA03 and distributor part number BCM47083SA03-ND. Mouser Canada describes the same part as an RF System on Chip and 3+3 GE WLAN chipset with 11ac. Other listings classify it under embedded microprocessors and RF system-on-chip categories. These consistent descriptions make it suitable for preliminary design research into wireless routers, gateways, and similar connected equipment, provided the designer validates pin compatibility, radio certification, firmware support, and supply availability. A key design consideration is that BCM47083SA03 appears to be a specialized connected-product component rather than a general-purpose microcontroller. A replacement cannot be selected from a generic 32-bit processor list: the complete package, pinout, Ethernet integration, radio interfaces, firmware dependencies, and regulatory requirements must match. The verified cross-reference search did not identify a defensible drop-in replacement, so no substitute MPN is claimed on this page. Because the package pin count and public pin names are absent from the supplied data, the pinout is reported as unavailable rather than inferred. This page consolidates verified distributor descriptions, sourcing links, application context, and engineering selection guidance that are not available from a single catalog snippet. It also explicitly separates confirmed facts from parameters that still require the manufacturer datasheet, helping procurement and hardware teams avoid treating incomplete distributor metadata as a complete design reference.

RFQ संपर्क
BCM47083SB03 - 3+3 GE 11n/11ac WLAN SoC | Broadcom
BCM47083SB03

BCM47083SB03 - 3+3 GE 11n/11ac WLAN SoC | Broadcom

Broadcom BCM47083SB03 is an RF system-on-chip (SoC) and WLAN chipset identified by the verified listings as a 3+3 Gigabit Ethernet configuration supporting both 802.11n and 802.11ac. It is positioned as an embedded processor solution for networking equipment requiring combined wireless LAN and wired Ethernet connectivity. The available distributor data confirms the device family, manufacturer, MPN, wireless standards, and Gigabit Ethernet configuration, but it does not publish a complete electrical specification table. An RF system-on-chip integrates multiple radio and digital processing functions into one semiconductor device. In this product category, an embedded WLAN chipset connects a router, gateway, access point, or similar network appliance to wireless clients while coordinating Ethernet traffic within the same embedded platform. The BCM47083SB03 designation specifically identifies a 3+3 GE WLAN chipset supporting 11n and 11ac operation. The verified source information highlights three primary attributes: the BCM47083SB03 MPN, support for 802.11n plus 802.11ac, and a 3+3 Gigabit Ethernet WLAN chipset configuration. These features place the component in the connected-device and networking-equipment market. Broadcom / Avago is the manufacturer branding shown by Mouser, while other authorized-marketplace listings identify the part under Broadcom Limited. Because these integrated wireless processors normally contain sensitive radio, firmware, and platform-specific functions, designers should evaluate the complete Broadcom documentation, board support package, supported radio components, and reference designs before committing a layout. The supplied search results include distributor datasheet and technical-support links, but they do not expose verified processor frequency, core architecture, memory capacity, radio output power, channel bandwidth, security features, pin count, package dimensions, or electrical limits. Typical design uses include dual-band or multi-standard wireless routers, enterprise access points, residential gateways, smart-home hubs, and network appliances that need both Wi-Fi connectivity and Gigabit Ethernet interfaces. Those applications are justified by the verified 11n/11ac and 3+3 GE descriptions, although the exact port arrangement, antenna interface, regulatory approval, and supported operating bands must be confirmed from the manufacturer documentation for the intended product configuration. A key design caution is that chipset compatibility extends beyond matching the radio standard. The PCB stack-up, antenna matching network, RF layout, power supplies, clocks, memory interface, boot configuration, firmware, and regulatory certification all affect operation. A replacement should therefore be treated as drop-in only after its package, pinout, electrical ratings, radio calibration, firmware support, and board requirements have been independently verified. This page consolidates the verified distributor descriptions, available sourcing links, pricing limitations, and engineering cautions for BCM47083SB03. It also distinguishes documented facts from missing specifications and does not present unverified package, pin, performance, or replacement claims as confirmed facts.

RFQ संपर्क
BCM47093SA03 - 802.11n Processor IC | Broadcom
BCM47093SA03

BCM47093SA03 - 802.11n Processor IC | Broadcom

Broadcom BCM47093SA03 is an embedded microprocessor IC identified as an Intensifi Gigabit Ethernet and Draft 802.11n processor. It is intended for network equipment that combines wireless networking with wired Ethernet connectivity. The component is supplied by Broadcom under the exact orderable MPN BCM47093SA03, and distributor records classify it as a microprocessor IC. An integrated wireless network processor is a specialized type of embedded processor that executes networking software, controls radio and Ethernet interfaces, and manages traffic between local clients and an upstream network. Its functional hierarchy extends from an embedded microprocessor to a system-on-chip, network processor, and connected-device semiconductor. This makes BCM47093SA03 relevant to routers, gateways, access points, and other products requiring integrated Gigabit Ethernet and 802.11n networking. The principal documented feature of BCM47093SA03 is its Draft 802.11n wireless-networking capability alongside Gigabit Ethernet processing. Draft 802.11n connectivity allows compatible equipment to combine wireless and wired networking functions in one system. The exact processor core, clock rate, memory capacity, radio integration details, and operating limits are not established by the manufacturer datasheet excerpt cited in the product records and should therefore be confirmed before schematic or firmware decisions are finalized. The BCM47093 family is associated with Broadcom's Intensifi platform for integrated networking products. In such systems, a network processor can coordinate Ethernet traffic, wireless-medium access functions, protocol processing, and host-side networking services. This architecture can reduce the number of separate controllers required in a network appliance, although final RF design, antenna implementation, regulatory approval, and antenna selection remain the responsibility of the product manufacturer. Typical uses include residential dual-band routers, wireless gateways, broadband customer-premises equipment, mesh-networking nodes, and embedded Ethernet appliances. In these applications, BCM47093SA03 can serve as the principal communications controller when the surrounding design also supplies suitable memory, power, clock, Ethernet magnetics, radio circuitry, flash storage, and required firmware. A primary design consideration is firmware and platform validation. Confirm that the Broadcom SDK, board support package, network driver, regulatory configuration, and security updates apply to the exact BCM47093SA03 ordering option. Also verify the manufacturer's pin description and package drawing before assigning PCB nets; these details must not be inferred from the BCM4705 or BCM4709 family labels because related processor numbers can use different interfaces or package arrangements. This product page combines the exact Broadcom MPN, distributor product records, availability channels, technical comparison fields, application guidance, and design cautions in one engineering-oriented reference. It highlights what is established for BCM47093SA03 while directing firmware, package, and layout decisions to the applicable Broadcom documentation and authorized product channels.

RFQ संपर्क
BCM47452SN01 RF System on Chip | Broadcom
BCM47452SN01

BCM47452SN01 RF System on Chip | Broadcom

Broadcom BCM47452SN01 is an RF system-on-chip solution combining the BCM47452 processor with BCM43570E and BCM54210E devices in one Broadcom wireless-connectivity offering. The manufacturer product listing identifies it specifically as an RF system on chip, while distributor records classify it under embedded system-on-chip components. Its package type, pin count, operating frequencies, memory configuration, power ratings, and environmental limits are not stated in the available product records. A radio-frequency system on chip, or RF SoC, combines digital processing, radio control, and connectivity functions within a single semiconductor platform. In the broader semiconductor hierarchy, an RF SoC belongs to the integrated-circuit and wireless-connectivity domains. Its practical value comes from integrating functions that would otherwise require several discrete chips, thereby reducing interconnections, board area, and the software and hardware coordination needed to operate a connected product. The BCM47452SN01's defining feature is its integrated connectivity architecture. The listed BCM47452 core is paired with BCM43570E and BCM54210E devices, creating a platform associated with wireless networking and embedded connectivity. The exact division of radio, Ethernet, control, and interface functions requires confirmation from the manufacturer datasheet. In particular, engineers should not infer supported wireless bands, port counts, protocols, or transceiver performance from the part number alone. Because this component combines multiple Broadcom devices, it belongs to the class of highly integrated embedded wireless platforms rather than general-purpose microcontrollers. Such devices commonly coordinate firmware, network traffic, radio operation, host interfaces, and external memory. They are normally designed for embedded connectivity products where a controlled hardware and software stack is more valuable than a broad collection of general-purpose peripherals. Potential applications include embedded wireless routers, connected gateways, industrial network equipment, and other products requiring Broadcom's integrated wireless-connectivity architecture. In these systems, the BCM47452SN01 can serve as the central connectivity processor when its documented interfaces, memory, firmware support, and regulatory requirements match the product design. Ethernet companion options such as DP83867IRRGZR may be considered in related equipment, but the final architecture must follow the device's documented reference connections. The primary design consideration is verification. Before schematic capture or PCB layout, obtain the manufacturer datasheet and confirm pin assignments, exposed-pad requirements, power rails, clocking, boot configuration, memory interfaces, RF routing, decoupling, and thermal conditions. These details determine whether BCM47452SN01 is appropriate for the intended enclosure, antenna system, compliance region, and operating environment. This product page consolidates the confirmed Broadcom device composition, distributor classification, sourcing references, and engineering-selection questions. It also distinguishes documented facts from parameters that require manufacturer confirmation, helping engineers evaluate BCM47452SN01 without assuming unstated electrical, package, or pin-level details.

RFQ संपर्क
BCM55030SF01 Broadcom SoC for Embedded Systems
BCM55030SF01

BCM55030SF01 Broadcom SoC for Embedded Systems

The Broadcom BCM55030SF01 is an embedded System on Chip (SoC) identified in the manufacturer and distributor records as the BCM55030 combined with BCM54640 functionality. It is categorized as an integrated semiconductor device intended for embedded connectivity and control systems. The exact electrical ratings, processor configuration, memory capacity, transceiver characteristics, pin count, package dimensions, and environmental limits are not stated in the available manufacturer-facing references for this ordering code, so those values should be confirmed against the Broadcom product documentation before design release. An SoC combines multiple functional blocks on one semiconductor device. In embedded networking equipment, an SoC may integrate a processor, memory interfaces, communications controllers, and supporting peripherals to reduce component count and simplify a board design. The BCM55030SF01 designation specifically appears in connection with BCM55030 and BCM54640, indicating a specific Broadcom device ordering code rather than a generic discrete component. Its system-level integration can help designers standardize platforms across gateway, access, and industrial networking products, but the exact interface set must be checked for each revision. The BCM55030SF01 is listed by Broadcom as a System on Chip (SOC) IC. Distributor catalog records also classify the part as an embedded SoC and identify Broadcom as the manufacturer. This classification is the key technical fact available for initial component selection. Before assigning this device to a PCB, engineers should verify the package drawing, pin assignment, power architecture, required clocking, boot interface, Ethernet or other network interfaces, and recommended external components in the appropriate Broadcom datasheet. Typical engineering uses include embedded network appliances, access equipment, industrial controllers, and communication systems that require a highly integrated Broadcom platform. The device may be considered when a design needs the BCM55030 and BCM54640 feature combination in one ordering code. Suitability depends on matching the available interface set, performance requirements, software support, operating-temperature range, and lifecycle expectations to the target product. For PCB design, preserve the package-specific land pattern, provide the required power and decoupling networks, and follow the reference clock and reset guidance in the manufacturer documentation. For software, verify the supported boot flow, firmware image format, device-tree or board-support-package requirements, and peripheral pin multiplexing. Do not infer register compatibility from the BCM55030 or BCM54640 names alone; use the exact BCM55030SF01 documentation for the production design. This page organizes the confirmed Broadcom identity, the BCM55030 plus BCM54640 device description, catalog sources, commercial request path, and design questions engineers should resolve. It is intended to support early sourcing and engineering review while directing final footprint, electrical, and qualification decisions to the exact manufacturer documentation.

RFQ संपर्क
BH67F5362A - 24-bit Delta-Sigma A/D LCD Flash MCU | Holtek
BH67F5362A

BH67F5362A - 24-bit Delta-Sigma A/D LCD Flash MCU | Holtek

The Holtek Semiconductor BH67F5362A is a high-performance 8-bit RISC Flash microcontroller with an integrated 24-bit Delta-Sigma analog-to-digital converter and an LCD driver, engineered for high-precision measurement products such as electronic scales, blood pressure meters, clinical thermometers, and industrial meters. It supports a system clock up to 16 MHz delivering up to 0.25 µs instruction cycle at VDD = 5 V, and is housed in an LQFP-64 package (10 mm × 10 mm, 0.5 mm pitch). Wide operating voltage from 1.8 V to 5.5 V at 8 MHz scales up to 3.3 V–5.5 V at 16 MHz, and the part integrates multi-programmable Flash program memory, RAM data memory, and true EEPROM for non-volatile calibration and serial-number storage. A microcontroller with an integrated 24-bit Delta-Sigma ADC is part of the precision-measurement MCU category, which sits hierarchically within MCU -> microcontroller -> embedded controller -> semiconductor. These MCUs combine a CPU core, on-chip peripherals, and a precision analog front end in a single device, removing the need for an external ADC and enabling low-noise, high-ENOB acquisition directly at the sensor. Key features include a 24-bit Delta-Sigma A/D converter with programmable data rate and selectable gain, an integrated LCD driver supporting multiple bias and duty modes, multiple oscillator options (external HXT, internal HIRC 8/12/16 MHz, external LXT 32.768 kHz, internal LIRC) for low-power or high-throughput operation, and an In-Application Programming (IAP) interface for in-field firmware updates. Power-down and wake-up functions, along with rich communication peripherals (UART, I²C, SPI), make the BH67F5362A a flexible platform for battery-powered instrumentation. The architecture is built on Holtek's 8-bit RISC core with a Harvard-style memory layout separating program Flash from data RAM and EEPROM. The Delta-Sigma modulator uses a switched-capacitor front end with a digital decimation filter, and the integrated LCD driver supports resistive or PWM-segment biasing with software-configurable frame frequency, allowing the MCU to drive a multi-segment glass directly without an external charge-pump IC. Typical applications include electronic weighing scales, sphygmomanometers (blood pressure monitors), body-thermometers and glucometers, industrial process meters, and water/gas utility meters. The wide VDD range and rich peripherals also support HVAC sensor readouts and portable data loggers. When designing with the BH67F5362A, ensure the analog front-end layout follows Holtek's reference design: a guard ring around the ADC input traces, separate analog and digital ground planes joined at a single point, and a 100 nF decoupling capacitor within 5 mm of each power pin. Use the internal EEPROM to store per-unit calibration constants; load them on every power-up to compensate for load-cell drift. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, including pinout references and In-Application Programming workflows validated against the official Holtek datasheet v1.10.

RFQ संपर्क
BH67F5372A - 24-Bit ADC LCD Flash MCU | Holtek Semiconductor
BH67F5372A

BH67F5372A - 24-Bit ADC LCD Flash MCU | Holtek Semiconductor

The Holtek Semiconductor BH67F5372A is a 24-bit Delta-Sigma A/D LCD Flash microcontroller built on an 8-bit high-performance RISC architecture, packaged in an LQFP-64 housing. It integrates a multi-channel 12-bit A/D converter, an analog comparator, a 24-bit Delta-Sigma A/D converter with programmable gain amplifier, a built-in LCD driver, and flexible Timer Modules supporting timing, pulse generation, and PWM functions. The integrated 24-bit Delta-Sigma ADC is designed for high-precision differential measurement of low-frequency analog signals. What is an A/D Flash MCU? An A/D Flash microcontroller (MCU) is a single-chip microcontroller that combines Flash program memory (re-programmable in-circuit) with high-resolution analog-to-digital conversion peripherals. The Flash program memory enables in-system firmware updates, while the integrated A/D converter allows the MCU to directly digitize analog sensor signals without an external ADC chip. The BH67F5372A belongs to the microcontroller product family, within the broader category of microcontrollers -> microprocessors -> integrated circuits -> semiconductors. Its 24-bit Delta-Sigma ADC provides effective number of bits (ENOB) suitable for precision weighing scales, blood pressure monitors, and industrial measurement instruments that interface directly to analog signals and require an LCD display. Key features of the BH67F5372A include 24-bit Delta-Sigma A/D converter with integrated programmable gain amplifier (PGA), a separate multi-channel 12-bit SAR A/D converter, an integrated LCD driver for direct glass connection, abundant I/O for key scanning and segment expansion, and Flash program memory supporting in-system programming (ISP). Multiple flexible Timer Modules provide timing, pulse generation, and PWM generation functions. Communication peripherals include interfaces for host and external (UART, I2C, SPI typically available on this Holtek family). The BH67F5372A uses Holtek's 8-bit high-performance RISC core with a Harvard architecture, enabling single-cycle instruction execution at typical oscillator speeds. The wide operating voltage and integrated analog front-end (PGA + 24-bit Delta-Sigma ADC) eliminate the need for external signal conditioning, reducing BOM cost and PCB area. The on-chip LCD driver supports a wide range of LCD panel configurations through internal bias generation and software-controlled segment mapping, simplifying the design of battery-powered instruments with display readouts. Typical applications include electronic weighing scales, body composition analyzers, blood pressure monitors, medical measurement instruments, industrial process sensors, and consumer health devices. The combination of high-resolution ADC and LCD driver makes it a single-chip solution for portable battery-powered instruments. When designing with this MCU, pay attention to the analog front-end grounding: separate analog and digital ground planes with a single-point connection near the MCU's AVSS/AVDD pins is critical to achieve the full 24-bit ENOB performance. The integrated PGA gain settings must be matched to the sensor output range to maximize dynamic range. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet. We cross-reference same-brand LQFP-64 variants of the BH67F5372A family and Holtek's sister MCU BH67F5362A for designers evaluating pin-compatible alternatives.

RFQ संपर्क
BSC9131NJE1HHHB - QorIQ Qonverge SoC, 800MHz e500 + StarCore | NXP
BSC9131NJE1HHHB

BSC9131NJE1HHHB - QorIQ Qonverge SoC, 800MHz e500 + StarCore | NXP

The NXP (formerly Freescale) BSC9131NJE1HHHB is a QorIQ Qonverge heterogeneous SoC that pairs an 800 MHz Power Architecture e500 microprocessor core with an 800 MHz StarCore SC3850 DSP core and a MAPLE-B2F baseband accelerator, housed in a 520-pin FCBGA (21x21 mm) package and rated for the -40C to +105C industrial/extended temperature range. A QorIQ Qonverge SoC is a heterogeneous communications processor that combines a control-plane general-purpose CPU, a signal-processing DSP core, and hardware acceleration for baseband or packet processing in a single die. The BSC9131 specifically targets small-cell wireless base stations and other line-card applications where latency-sensitive control and high-throughput DSP must coexist on one chip, simplifying board design versus a discrete CPU + DSP architecture. Key features include: 1x e500 core at 800 MHz for control-plane code, 1x SC3850 StarCore DSP at 800 MHz for PHY/baseband processing, an integrated MAPLE-B2F baseband accelerator, DDR3 memory controller with ECC, integrated SEC (Security Engine) for IPsec/cryptographic offload, dual 10/100/1000 Ethernet MACs, multiple SerDes lanes for SGMII/PCIe, and a temperature range of -40C to +105C. The 520-pin FCBGA package exposes the full SerDes, Ethernet, DDR3, and JTAG interfaces needed for small-cell line cards. Architecturally, the e500 core runs the control-plane operating system and management stack while the SC3850 + MAPLE-B2F combination offloads L1/L2/L3 baseband DSP and Turbo/FFT operations, reducing overall BOM and power versus two discrete chips. SEC hardware accelerates encryption/decryption for secure backhaul links. Typical applications include small-cell LTE/eNodeB base stations, enterprise VoIP gateways, smart-grid control nodes, and defense/industrial signal-processing platforms that need combined control + DSP on one SoC. When designing with this device, plan PCB layout for the 520-ball FCBGA carefully - 0.8 mm or finer pitch BGA escape routing, controlled-impedance SerDes traces, and a multilayer stack-up with dedicated ground/power planes are required for signal integrity on DDR3 and SGMII links. This page synthesizes distributor pricing, lifecycle status, and design considerations beyond the manufacturer datasheet, helping engineers evaluate the BSC9131NJE1HHHB for current and legacy designs.

RFQ संपर्क