माइक्रोकंट्रोलर्स

उत्पाद (20,000+)

LPC4357JBD208E - 32-Bit Cortex-M4/M0 MCU | NXP | Industrial Control
LPC4357JBD208E

LPC4357JBD208E - 32-Bit Cortex-M4/M0 MCU | NXP | Industrial Control

The NXP Semiconductors LPC4357JBD208E is a 32-bit Arm Cortex-M4 microcontroller with an integrated Cortex-M0 coprocessor, up to 1 MB of flash memory, 136 kB of SRAM, and 16 kB of EEPROM in a 208-pin LQFP package. It combines high-performance embedded control with Ethernet, two high-speed USB interfaces, LCD support, and advanced configurable peripherals for industrial, communications, and consumer applications. A microcontroller is an integrated circuit containing a processor core, memory, and peripherals on one die. The LPC4357JBD208E belongs to the Arm Cortex-M4/M0 MCU family, combining a high-performance Cortex-M4 processor with an energy-efficient Cortex-M0 coprocessor. This architecture allows one device to handle control tasks, communications, and real-time workloads while keeping software development within the Arm ecosystem. Key features include up to 1 MB of embedded flash, 136 kB of on-chip SRAM, 16 kB of EEPROM, a quad SPI Flash Interface, Ethernet, two high-speed USB ports, LCD functionality, the State Configurable Timer, and Serial General Purpose I/O. The Cortex-M0 coprocessor is upward code- and tool-compatible with the Cortex-M4 core and is designed to reduce code size when replacing traditional 8-bit and 16-bit designs. The dual-core Arm architecture supports flexible partitioning between application processing and low-power or peripheral-control tasks. The device is supplied in a 208-pin LQFP package for surface-mount PCB assembly. Its extensive peripheral set can reduce the need for external interface components in embedded systems that require USB, Ethernet, display control, or multiple timer functions. Typical uses include industrial control equipment, USB-connected embedded systems, Ethernet-connected controllers, human-machine interfaces, communications equipment, and consumer products. Designers should confirm the exact peripheral pin mapping, clock configuration, power requirements, memory organization, and software support from the official NXP datasheet before layout or firmware development. A key design consideration is that this is a complex mixed-signal embedded controller. Decoupling, clock routing, high-speed USB and Ethernet signal integrity, exposed-pad or thermal management requirements, and correct startup configuration must be planned early in the PCB design process. This page combines verified manufacturer and distributor information with practical engineering guidance. It distinguishes confirmed LPC4357JBD208E attributes from unavailable details and focuses on helping engineers evaluate the MCU for real embedded designs rather than repeating generic catalog information.

RFQ संपर्क
LPC4357JBD208K - ARM Cortex-M4/M0 MCU, 1MB Flash, 208-LQFP | NXP
LPC4357JBD208K

LPC4357JBD208K - ARM Cortex-M4/M0 MCU, 1MB Flash, 208-LQFP | NXP

The NXP LPC4357JBD208K is a 32-bit dual-core ARM Cortex-M4/M0 microcontroller with up to 204 MHz performance, 1 MB of on-chip flash, and 136 kB of SRAM, housed in a 208-pin LQFP (28x28) package. It integrates a Cortex-M4 core with a Cortex-M0 coprocessor for offloading I/O and peripheral handling, plus 16 kB of EEPROM, a quad SPI Flash Interface (SPIFI), two High-speed USB ports, an Ethernet MAC, an LCD controller, and an External Memory Controller (EMC). An MCU (microcontroller unit) is a single-chip computer that integrates a CPU, memory (flash/SRAM), and programmable peripherals around a shared internal bus. The ARM Cortex-M family is a 32-bit RISC core family from Arm, and the Cortex-M4 (with FPU, DSP extensions) and Cortex-M0 (smallest, lowest-gate-count) are upward code- and tool-compatible, allowing a Cortex-M4 main core to be paired with a Cortex-M0 I/O coprocessor inside one chip. LPC43xx sits in NXP's high-performance MCU portfolio aimed at embedded applications that need both DSP-class signal processing and deterministic I/O. Key features include dual-core asymmetric processing (M4 main + M0 coprocessor), 1 MB flash, 136 kB SRAM, 16 kB EEPROM, SPIFI for off-chip quad-SPI flash expansion, an SCT (State Configurable Timer) for complex PWM/capture sequences, SGPIO for high-speed serial I/O, two High-speed USB (one with on-chip HS PHY), Ethernet, an LCD controller supporting STN/TFT panels, and an EMC for SRAM/SDRAM/NOR/NAND. The 208-LQFP (28x28) package provides a thermal resistance suitable for industrial ambient operation with moderate copper pour. Architecture depth: the Cortex-M4 core provides single-precision floating point and DSP (SIMD) instructions, while the Cortex-M0 coprocessor is intended to handle low-latency peripheral routines (for example, USB or motor-control loops) without disturbing the M4 application. A multi-layer AHB bus matrix routes independent masters (CPU, DMA, USB, Ethernet) to on-chip SRAM banks to minimize contention, and the SCT allows event-driven timing that can replace multiple capture/compare timers. Typical applications include industrial drives and motor control (using SCT and dual cores), HMI panels (LCD + touch + Ethernet), USB peripherals and hubs (HS USB host/device), embedded connectivity gateways (Ethernet + SPIFI for large external flash), test and measurement instruments, and audio front ends that benefit from M4 DSP + M0 I/O separation. When designing with this device, ensure the 208-LQFP power and ground pins are properly decoupled and that the SPIFI is only enabled when the application actually requires off-chip quad-SPI flash; otherwise keep it disabled to save power. Verify that the operating temperature grade (commercial 0 to 70 C, or industrial -40 to +85 C / -40 to +105 C depending on suffix) matches the end-equipment environment. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ संपर्क
LPC4357JET256 - Dual Cortex-M4/M0 MCU 1MB Flash | NXP
LPC4357JET256

LPC4357JET256 - Dual Cortex-M4/M0 MCU 1MB Flash | NXP

The NXP LPC4357JET256 is a dual-core 32-bit microcontroller combining an Arm Cortex-M4 core and an Arm Cortex-M0 coprocessor, packaged in a 256-ball LBGA (17x17 mm) and operating at up to 204 MHz. The Cortex-M4 core delivers 1.25 DMIPS/MHz with FPU and DSP extensions, while the Cortex-M0 coprocessor handles peripheral offload and real-time housekeeping. The device integrates 1 MB of on-chip flash, 136 kB of SRAM, and 16 kB of EEPROM for parameter storage, supporting IEC 60335 Class B firmware upgrades without external memory in many designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals onto one die. The LPC4357 belongs to the high-performance tier of microcontrollers, sitting architecturally above single-core Cortex-M parts but below Cortex-A application processors. Within the power-management hierarchy it ranks as a master controller, and within NXP's portfolio it is part of the LPC4300 family, which is positioned for embedded applications requiring mixed signal/digital workloads and rich connectivity. Key features include dual High-Speed USB 2.0 controllers (one Host/Device/OTG, one Host), a 10/100 Ethernet MAC with MII/RMII, an LCD controller supporting up to 1024x768, an External Memory Controller (EMC) for SDRAM/NOR/NAND, a quad SPI Flash Interface (SPIFI) up to 80 MB/s, two CAN 2.0B ports, an SD/MMC card interface, a State Configurable Timer (SCT), a Serial General Purpose I/O (SGPIO) peripheral, and 164 general-purpose I/O pins. The 16 kB EEPROM with on-the-fly erase/write and a 4 KB ROM bootloader with In-System Programming (ISP) and In-Application Programming (IAP) are particularly valuable for field-upgradable designs. The dual-core architecture uses an ARM Cortex-M4 with single-precision FPU, DSP/SIMD instructions, and a Nested Vectored Interrupt Controller (NVIC), paired with the Cortex-M0 supporting peripheral scheduling and deterministic interrupt handling. The asynchronous multi-master AHB bus matrix allows both cores to access on-chip memory and peripherals concurrently, enabling deterministic latency even under heavy I/O. According to NXP's product literature, the LPC4357JET256 targets embedded graphics, industrial HMI, and motor control applications. Typical applications include industrial Human-Machine Interfaces (HMI) with TFT LCD, point-of-sale terminals, factory automation controllers, motor drives and inverter control, smart-grid energy monitors, and embedded audio with USB streaming. Designers choose the LPC4357 when they need more processing headroom than a single-core Cortex-M4 can deliver, without paying for a Cortex-A-class application processor. When designing with this part, ensure the LBGA256 PCB footprint includes 4 thermal vias under the exposed die paddle to keep junction temperature below 110 °C; pair SPIFI with the high-speed flash part recommended in the user manual for best throughput; and use the on-chip EEPROM for non-volatile parameters that must survive flash reprogramming. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the NXP datasheet alone.

RFQ संपर्क
LPC4367JBD208E - 204MHz Dual-Core Cortex-M4/M0 MCU | NXP
LPC4367JBD208E

LPC4367JBD208E - 204MHz Dual-Core Cortex-M4/M0 MCU | NXP

The NXP LPC4367JBD208E is a dual-core 32-bit microcontroller based on Arm Cortex-M4 and Cortex-M0 processor cores, operating at up to 204 MHz. It integrates 1 MB of flash memory and 154 kB of SRAM in a 208-lead LQFP package measuring 28 x 28 mm. Ethernet, two high-speed USB interfaces, LCD support, and EMC features make it suitable for connected industrial, communications, and human-machine-interface equipment. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, peripherals, and communication interfaces into one package. The Cortex-M4 core handles real-time control and DSP-oriented processing, while the Cortex-M0 core can execute supporting tasks, offload background work, or provide a dedicated boot and communications path. This heterogeneous dual-core architecture belongs to the ARM Cortex-M family of low-power embedded processors. The LPC4367JBD208E combines 1 MB of on-chip flash with 154 kB of SRAM for code, data storage, frame buffering, and Ethernet or USB data handling. Its processor includes a memory protection unit supporting eight regions and a nested vectored interrupt controller for deterministic interrupt servicing. The 208-LQFP package provides extensive external connectivity for industrial control, network interface, display, and USB applications. The device integrates Ethernet, two high-speed USB ports, and LCD-related functionality. These interfaces allow one microcontroller to manage network traffic, USB connectivity, graphical output, and real-time control functions without requiring separate communication controllers. The combination of a 204 MHz Cortex-M4 core and an auxiliary Cortex-M0 core is particularly useful when control-loop workload must be isolated from service tasks or connectivity stacks. Typical applications include industrial Ethernet controllers, USB-to-Ethernet bridges, connected test equipment, building automation gateways, human-machine interfaces, and embedded data acquisition systems. The dual-core design can also support protocol handling alongside real-time sampling or motor-control workloads where deterministic task separation improves system responsiveness. When laying out the 208-LQFP board, follow the NXP datasheet pin-assignment table for every supply, ground, analog, and high-speed signal connection. Place decoupling capacitors at each supply pin, route Ethernet and USB differential pairs with controlled geometry, and keep the M4 and M0 clock, reset, and debug interfaces accessible for production programming and fault diagnosis. This page consolidates the NXP device specifications, package and memory details, interface capabilities, drop-in family alternatives, and practical layout guidance. It also provides parameter comparisons and engineering notes that support design review, sourcing, PCB planning, and long-term maintenance of LPC43xx-based products.

RFQ संपर्क
LPC4367JET100E - 204MHz Dual-Core Cortex-M4/M0 MCU, 1MB Flash | NXP
LPC4367JET100E

LPC4367JET100E - 204MHz Dual-Core Cortex-M4/M0 MCU, 1MB Flash | NXP

The NXP Semiconductors LPC4367JET100E is a high-performance 32-bit dual-core microcontroller built on Arm Cortex-M4/M0, operating up to 204 MHz with 1 MB (1M x 8) on-chip flash and 154 kB of on-chip SRAM in a 100-ball TFBGA (9x9 mm) package. It integrates Ethernet, two high-speed USB ports, an LCD controller and EMC peripherals. A microcontroller is a programmable system-on-chip that integrates a CPU core, memory and peripherals onto one die. The LPC43xx family belongs to the embedded microcontroller segment of integrated circuits, sitting between simple 8/16-bit controllers and higher-end application processors. Its Arm Cortex-M4 core carries the main application workload while an Arm Cortex-M0 subsystem handles peripheral management, and the M0 coprocessor is explicitly designed as a replacement for existing 8/16-bit microcontrollers with up to 204 MHz performance and a reduced code size. Key features of the LPC4367JET100E include dual-core operation at 204 MHz, 1 MB of flash for firmware and data, 154 kB of SRAM for working buffers, and 16 kB of on-chip EEPROM for parameter storage. The Cortex-M0 hardware multiply is implemented as a 32-cycle iterative multiplier, which keeps coprocessor execution deterministic. Two independent high-speed USB interfaces allow simultaneous host/device or dual-device connectivity, and the integrated Ethernet MAC supports networked industrial and communications equipment. Internally, the device combines an Arm Cortex-M4 processor with an Arm Cortex-M0 subsystem for managing peripherals, plus a separate Cortex-M0 coprocessor. Memories and peripherals sit behind an efficient bus matrix, and the LCD controller and EMC peripherals support display-driven human-interface designs. The LPC436x family targets embedded applications that need connectivity plus real-time control. Typical applications include industrial Ethernet gateways, USB-to-Ethernet bridges, PLC and data-acquisition controllers, human-machine interface panels with integrated LCD, and connected sensor or building-automation nodes. Because the MCU integrates USB, Ethernet and LCD control in one package, many designs replace a multi-chip processor-plus-interface solution. When designing with the LPC4367JET100E, plan power and decoupling carefully around the 204 MHz core, keep high-speed USB and Ethernet traces short and reference-controlled, and leave the BGA escape routing dense enough for clean layer changes. A 100-ball TFBGA also demands a careful ball-map review and adequate thermal vias under the die. This page assembles the NXP product information, distributor availability listings and the LPC436x family datasheet into one engineering reference, adding drop-in alternatives, parameter-by-parameter comparison and practical design notes that go beyond the manufacturer overview.

RFQ संपर्क
LPC4367JET256E - 204MHz Dual-Core MCU | NXP | 256-LBGA
LPC4367JET256E

LPC4367JET256E - 204MHz Dual-Core MCU | NXP | 256-LBGA

NXP LPC4367JET256E is a 32-bit dual-core microcontroller built around Arm Cortex-M4/M0 processor cores, operating up to 204 MHz, with 1 MB of embedded flash, 154 kB of SRAM, and 16 kB of EEPROM in a 256-LBGA package measuring 17 x 17 mm. It integrates Ethernet, two high-speed USB interfaces, and LCD support for connected embedded systems. A microcontroller is a programmable semiconductor that combines a processor core, nonvolatile program memory, working memory, and peripherals in one package. The LPC4367JET256E belongs to the Arm Cortex-M family and provides a higher-performance M4 core alongside an M0 subsystem for managing peripherals. Its integration supports connected industrial equipment, human-machine interfaces, data acquisition systems, and embedded network controllers without requiring separate devices for several common communication functions. The headline configuration combines 204 MHz maximum processing speed, 1 MB of flash, and 154 kB of SRAM. Its dual-core architecture can divide real-time peripheral-control work from higher-level application processing. The integrated Ethernet interface supports networked equipment, while two high-speed USB interfaces support direct connectivity, configuration, or peripheral expansion. The LCD interface is useful for control panels and local graphical status displays. NXP describes the LPC4367JET256E as a high-performance 32-bit MCU based on Arm Cortex-M4/M0. The 256-ball BGA package provides 256 physical contacts and supports the dense integration required by the Ethernet, USB, LCD, memory, and general-purpose I/O resources. The verified product information also identifies EMC support as part of the device capability set. Exact pin functions, complete electrical limits, and detailed timing parameters must be confirmed against the official NXP datasheet before schematic capture or PCB layout. Typical uses include industrial Ethernet controllers, USB-equipped data acquisition units, programmable logic and test equipment, LCD-based operator interfaces, and embedded gateways. The M4/M0 combination is particularly useful when deterministic peripheral management must coexist with more demanding protocol processing or application logic. PCB design should preserve the LBGA escape-routing channels, provide suitable power and decoupling networks, and follow NXP layout guidance. Because this package has a high ball count and fine pitch, assembly capability, via-in-pad requirements, thermal-via density, and solder-mask design should be reviewed with the board fabricator before release. This page consolidates the verified manufacturer and distributor information for the LPC4367JET256E, including its core architecture, memory configuration, package, connectivity, price reference, and traceable source links. It also separates verified facts from unavailable electrical details and highlights where an engineer must consult the official NXP datasheet before making a drop-in or layout decision.

RFQ संपर्क
LPC4370FET100K - 204MHz Tri-Core MCU | NXP | Industrial
LPC4370FET100K

LPC4370FET100K - 204MHz Tri-Core MCU | NXP | Industrial

The NXP Semiconductors LPC4370FET100K is a 32-bit Arm Cortex-M4 and two Cortex-M0 microcontroller with a 204 MHz primary core, 282 kB of SRAM, and a 100-TFBGA 9 x 9 mm package. The flashless device integrates Ethernet, two high-speed USB controllers, and an 80 Msps 12-bit ADC for connected embedded systems. A microcontroller is a programmable system-on-chip containing a processor core, memory, peripherals, and interface controllers on one package. The LPC4370 belongs to the 32-bit embedded MCU hierarchy and combines a Cortex-M4 application core with two Cortex-M0 cores for peripheral management and real-time control. Its mixed-core architecture can offload time-critical tasks while the primary core handles application logic and high-bandwidth communications. The LPC4370FET100K provides 204 MHz processing performance, 282 kB of SRAM, Ethernet, two high-speed USB ports, and an 80 Msps 12-bit ADC. The 12-bit converter combines sampling speed with sufficient resolution for many industrial monitoring, sensor acquisition, and control tasks. Its extensive serial, communications, timing, and configurable peripheral resources support data acquisition, communications equipment, industrial controllers, and connected embedded products. The Cortex-M4 core uses a three-stage pipeline, Harvard architecture, separate instruction and data buses, and a peripheral bus. This organization supports efficient concurrent access to code, data, and peripherals. The two Cortex-M0 resources are useful for managing peripherals or executing deterministic control functions without loading the main application core. The exact internal flash, memory, and peripheral configuration should be confirmed in the manufacturer LPC4370 product data sheet before firmware and board design begin. Typical applications include Ethernet-connected industrial controllers, high-speed USB data-acquisition equipment, environmental monitoring systems, factory automation nodes, and embedded gateways. Ethernet and dual high-speed USB support provide multiple paths for host connectivity, diagnostics, firmware update, and external storage or sensor interfaces. The 80 Msps ADC also makes the device suitable for rapid analog signal acquisition when paired with suitable front-end circuitry. PCB implementation requires careful attention to the 100-TFBGA footprint, high-speed USB routing, Ethernet impedance control, analog-input conditioning, and exposed-pad thermal management. Place decoupling capacitors close to their associated supply pins, use short return paths for high-speed signals, and follow the manufacturer package and layout guidance. Confirm all pin assignments and board dimensions against the LPC4370 product data sheet. This page combines the manufacturer product information with engineering-oriented application guidance, package considerations, a structured comparison against identified NXP family alternatives, and practical design notes. It helps engineers evaluate whether the LPC4370FET100K provides the required processing, connectivity, conversion performance, and package density for a specific embedded design.

RFQ संपर्क
LPC4370FET256E - Tri-Core 204MHz MCU with 282kB SRAM | NXP
LPC4370FET256E

LPC4370FET256E - Tri-Core 204MHz MCU with 282kB SRAM | NXP

The NXP Semiconductors LPC4370FET256E is a 32-bit tri-core Arm Cortex-M4 and Cortex-M0 microcontroller with a 204 MHz maximum CPU frequency, 282 kB of SRAM, and a 256-LBGA package measuring 17 x 17 mm. It is ROMless and operates from a 3.3 V supply according to the verified product listings. The LPC4370 combines one Cortex-M4 core with two Cortex-M0 cores, allowing control-intensive and communication-related tasks to be distributed across the processing architecture. A microcontroller is a programmable system-on-chip that integrates a processor core, memory interfaces, peripherals, and communication controllers onto one package. The LPC4370 belongs to the Arm Cortex-M4 microcontroller family and extends the platform with two Cortex-M0 subsystems for peripheral management. This hierarchy places it within embedded processors, where deterministic control, connectivity, and configurable peripherals are combined in a single device. Verified feature data identifies 282 kB of SRAM, Ethernet connectivity, two high-speed USB controllers, an 80 Msps 12-bit ADC, LCD support, configurable timers, and serial GPIO. The three-core arrangement can separate real-time I/O or protocol handling from higher-level application processing. Its 204 MHz Cortex-M4 core provides substantial computation for communications gateways, industrial controllers, and connected embedded equipment. The LPC4370 uses advanced configurable peripherals such as the State Configurable Timer and Serial General Purpose I/O interface. These resources can be adapted to application-specific timing, trigger, routing, or communication requirements rather than relying only on fixed peripheral functions. The two high-speed USB controllers, Ethernet interface, and 12-bit ADC also reduce the need for external interface devices when the board design requires several data acquisition and communications paths. Typical applications include industrial automation, Ethernet-connected control systems, high-speed data acquisition, human-machine interfaces with LCD support, and embedded gateways. The 256-LBGA package exposes a large number of I/O and peripheral resources, but its fine-pitch construction requires careful PCB layout, inspection, and assembly capability. Designers should confirm external memory configuration, pin multiplexing, power integrity, differential-signal routing, and thermal performance against the manufacturer datasheet. Because this part is ROMless, a boot strategy and external nonvolatile storage must be planned at the system level. Software compatibility, peripheral errata, and toolchain support should also be checked before production release. This page combines verified manufacturer and distributor information with package, sourcing, comparison, and design considerations. It identifies where the LPC4370FET256E fits and explicitly marks specifications that require confirmation rather than presenting unsupported values as facts.

RFQ संपर्क
LPC43S50FET180E - 204MHz Dual-Core MCU | NXP | 180-TFBGA
LPC43S50FET180E

LPC43S50FET180E - 204MHz Dual-Core MCU | NXP | 180-TFBGA

The NXP Semiconductors LPC43S50FET180E is a 32-bit dual-core Arm Cortex-M4/M0 flashless microcontroller for embedded applications, operating up to 204 MHz in a 180-ball TFBGA package measuring 12 x 12 mm. It includes 264 kB of SRAM, an AES security engine, Ethernet, two high-speed USB controllers, LCD support, SCTimer/PWM peripherals, and an SGPIO interface. The E suffix identifies the lead-free ordering variant listed by NXP. A microcontroller is an integrated semiconductor that combines a processor core, memory, communication peripherals, and control logic on one device. The LPC43S50FET180E belongs to the Cortex-M4/M0 embedded-processing hierarchy, combining a higher-performance Cortex-M4 core with a Cortex-M0 coprocessor. This architecture supports real-time control workloads that benefit from deterministic peripheral access, interrupt handling, and flexible timer-based signal generation without requiring external flash. The device runs at up to 204 MHz and provides 264 kB of SRAM for working data. Its integrated AES engine supports hardware-assisted cryptographic operations. Advanced configurable peripherals include the State Configurable Timer/PWM module and the Serial General-Purpose I/O interface, which can simplify motor, lighting, communications, and industrial-control designs. Two high-speed USB controllers add flexible host or device connectivity, while integrated Ethernet supports networked embedded equipment. The dual-core architecture can partition control and communication work between the Cortex-M4 and Cortex-M0 cores. The Cortex-M4 core handles performance-intensive processing, while the Cortex-M0 core can manage lower-level tasks independently. This division can reduce synchronization overhead when firmware is carefully partitioned, although shared-memory access and inter-core synchronization still require deliberate design. The manufacturer product page identifies the part for embedded applications with a broad combination of connectivity and control peripherals. Typical uses include industrial automation, Ethernet-connected controllers, USB peripherals and hosts, human-machine-interface controllers with LCD output, and motor or power-control systems using the SCTimer/PWM blocks. The 180-TFBGA package offers a high pin count for parallel interfaces and dedicated peripheral connections, but it requires careful escape routing, multilayer PCB construction, and precise component placement. When designing the PCB, follow the NXP package drawing and pin-assignment table for every ball connection. Route high-speed USB and Ethernet signals as controlled-impedance traces, provide the specified decoupling network, and reserve adequate copper for power and ground distribution. Because the device is flashless, system firmware must be loaded into the 264 kB of SRAM or paired with an external memory interface rather than assuming internal program flash. This page consolidates the exact LPC43S50FET180E identification, manufacturer feature description, verified distributor references, package details, engineering application guidance, and same-footprint replacement analysis into one decision resource. It also distinguishes confirmed drop-in compatibility from options that would require board-level redesign, firmware changes, or validation before use.

RFQ संपर्क
LPC43S57JBD208 - 204MHz Cortex-M4/M0 MCU | NXP
LPC43S57JBD208

LPC43S57JBD208 - 204MHz Cortex-M4/M0 MCU | NXP

NXP Semiconductors LPC43S57JBD208 is a 32-bit dual-core Arm Cortex-M4/M0 microcontroller operating at up to 204 MHz, with 1 MB of flash memory, 136 kB of SRAM, and 16 kB of EEPROM in a 208-pin LQFP package measuring 28 x 28 mm. The Cortex-M4 handles the primary embedded workload while the Cortex-M0 coprocessor supports independent control tasks. A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, data memory, and peripherals into one device. The Cortex-M4/M0 class belongs to the Arm Cortex-M family of 32-bit embedded processors. Within the electronics hierarchy, this device is a microcontroller IC, a semiconductor, and an embedded processing platform that can execute firmware while directly controlling memory, communications, security, display, and industrial I/O resources. The LPC43S57 family combines processing performance with integrated connectivity and security features. Verified product information identifies Ethernet connectivity, two USB interfaces, an LCD controller, an EMC engine, and an AES engine. These integrated resources reduce the need for separate peripheral devices when designing connected embedded systems. Its 136 kB SRAM provides substantially more working memory than many general-purpose microcontrollers, while the 1 MB flash capacity accommodates larger embedded code and data images. The 204 MHz Cortex-M4 core is designed for responsive real-time control, and the second Cortex-M0 core allows the system to divide control work between processors. This dual-core architecture can support concurrent tasks when firmware is partitioned appropriately. It is particularly relevant to industrial controllers, communications equipment, human-machine interfaces, and embedded systems that combine protocol handling with deterministic peripheral control. Typical applications include industrial Ethernet equipment, USB-connected control systems, LCD-equipped operator interfaces, secure embedded gateways, and networked factory automation nodes. Ethernet and dual USB support align with the device in connected machinery, while the LCD interface supports local status displays. The AES engine provides hardware-assisted encryption for designs requiring encrypted communication or protected firmware assets. PCB design should account for the 208-pin LQFP footprint, exposed power and ground requirements, high-speed USB routing, and Ethernet signal integrity. Differential USB and Ethernet pairs should be routed with controlled impedance and minimal discontinuity. Decoupling should be placed close to supply pins, and programming and debug access should be retained for production programming, field service, and firmware recovery. This page consolidates verified NXP product information, distributor pricing references, application guidance, and replacement analysis. It also distinguishes exact same-package alternatives from related LPC43S57 devices whose package pin counts differ, preventing a superficially similar part number from being presented as a true drop-in replacement.

RFQ संपर्क
LPC54101J256UK49Z - 100MHz Cortex-M4 MCU, 256KB Flash, 49-WLCSP | NXP
LPC54101J256UK49Z

LPC54101J256UK49Z - 100MHz Cortex-M4 MCU, 256KB Flash, 49-WLCSP | NXP

The NXP LPC54101J256UK49Z is a low-power 32-bit ARM Cortex-M4 microcontroller with 256 KB of on-chip Flash and 100 MHz CPU speed, packaged in a 49-ball WLCSP (3.29 x 3.29 mm). It belongs to the LPC541xx family, NXP's next-generation power-efficient MCU line targeting always-on sensor-processing and battery-powered applications, and provides flexible peripherals for mixed-signal IoT designs. What is an ARM Cortex-M4 microcontroller? An ARM Cortex-M4 microcontroller (MCU) is a 32-bit RISC processor featuring the Thumb-2 instruction set, hardware single-precision FPU, optional DSP extensions, and a tightly-coupled NVIC. MCUs integrate the CPU core, Flash, SRAM, timers, ADC, communication peripherals and power management into a single chip. The Cortex-M4 class sits between the Cortex-M0+ (lowest power) and Cortex-M7 (highest performance) within ARM's Cortex-M taxonomy, offering an excellent balance of computational throughput, deterministic interrupt response and energy efficiency. The LPC5410x family occupies a hypernym position of: microcontroller -> embedded processor -> semiconductor -> integrated circuit. The LPC54101J256UK49Z runs from a 1.62 V to 3.6 V supply, integrates 256 KB Flash, 104 KB SRAM, and supports up to 49 GPIOs depending on package. It includes a 12-bit, 5 MSPS ADC, multiple serial interfaces (USART, SPI, I2C), flexible timers, and a ROM-based bootloader with crypto and ISP support. The Cortex-M4 core includes a single-precision FPU and DSP extensions for efficient sensor-fusion math, while low-power modes (Sleep, Deep-sleep, Power-down, Deep-power-down) deliver quiescent currents suitable for coin-cell and energy-harvesting designs. Architecturally, the LPC5410x series is offered as either single Cortex-M4 or dual Cortex-M4 + Cortex-M0+ variants. The '01' suffix here denotes the single-core M4 configuration. The 49-WLCSP option minimises board area, addressing space-constrained wearables, hearables and IoT edge nodes where every square millimetre matters. Hardware-level features such as wake-up from multiple pin sources, RTC with calendar mode, and a power management unit with integrated LDO give the part its always-on character. Typical applications include wearable fitness and health sensors, IoT edge sensor nodes, low-power wireless modules, industrial sensor hubs, consumer hearables, and battery-powered human-machine interface controllers. The combination of Cortex-M4 DSP performance and deep-sleep currents in the single-digit microamp range makes this MCU particularly attractive for always-listening audio front-ends and motion-processing wearables. When designing, carefully manage the WLCSP land pattern and under-bump metallurgy for assembly yield; the exposed balls are 0.4 mm pitch. Decouple VDD and VDDIO close to each ball pair and follow the reference manual's recommended power-sequencing timing. Always respect the absolute maximum ratings on VBAT and VDD to avoid latch-up during battery hot-plug events. This page synthesises verified distributor pricing, package-compatible alternatives, and practical design notes for engineers selecting the LPC54101J256UK49Z into power-constrained embedded designs.

RFQ संपर्क
LPC54102J512UK49Z - 100MHz Dual-Core Cortex-M4/M0+ MCU 512KB | NXP
LPC54102J512UK49Z

LPC54102J512UK49Z - 100MHz Dual-Core Cortex-M4/M0+ MCU 512KB | NXP

The NXP LPC54102J512UK49Z is a low-power 32-bit dual-core microcontroller based on the ARM Cortex-M4 (with FPU) and Cortex-M0+ architecture, delivering up to 100MHz core frequency with 512KB on-chip Flash memory. The part integrates peripheral-rich connectivity and is housed in a compact 49-ball WLCSP (3.29mm x 3.29mm) package designed for space-constrained wearables, sensor nodes, and portable devices. The LPC541xx family represents NXP's next-generation power-efficient MCU portfolio. These dual-core MCUs pair a Cortex-M4 (application processing, DSP, FPU) with a Cortex-M0+ (peripheral and low-power housekeeping) on the same silicon. This asymmetric multiprocessing topology - formally called asymmetric dual-core (ADC) - allows designers to isolate time-critical or low-power peripheral servicing on the M0+ while the M4 application core sleeps. Architecturally, the LPC541xx sits inside the broader ARM Cortex-M hierarchy (Cortex-M4 -> Cortex-M processor family -> 32-bit RISC microcontrollers) and is positioned in NXP's general-purpose low-power MCU segment, competing with STM32L4 and EFM32 families. The device features include 104KB SRAM, multiple high-speed serial interfaces (USB 2.0 Full-Speed with on-chip PHY, SPI, I2C, UART), 12-bit ADC, and an integrated power management unit with multiple low-power modes. Per the NXP datasheet, active-mode current is approximately 100 uA/MHz at 3.0V with the M4 running, and deep-sleep current is in the single-digit microamp range when the M0+ continues peripheral servicing. Key features include dual-core Cortex-M4F + Cortex-M0+ at 100MHz, 512KB Flash, 104KB SRAM, USB 2.0 FS device/host, up to 12-bit 12-channel ADC, multiple low-power modes with sub-uA deep-sleep retention, and 49-WLCSP package. The compact 3.29mm x 3.29mm WLCSP footprint enables wearable form factors. Typical applications include always-on wearable devices, IoT sensor hubs, low-power wireless sensor nodes, smart home controllers, battery-powered consumer electronics, and HMI subsystems requiring simultaneous user-interface processing and low-power peripheral handling. Design considerations for this part include careful PCB routing under the WLCSP balls (the package has a 0.4mm pitch - per the WLCSP design guide, NSMD pads and microvia-in-pad or dog-bone escape routing are recommended), supply decoupling of at least 0.1uF + 4.7uF adjacent to each power pin, and boot-pin strapping to select ISP vs. internal Flash boot. Per the NXP datasheet, the dual-core boot sequence is configurable via the shared mailbox register and must be initialized in firmware. This page synthesizes distributor pricing, drop-in LPC541xx family alternatives, and practical design notes (WLCSP PCB layout, dual-core boot sequencing, low-power mode transitions) not found in the manufacturer datasheet.

RFQ संपर्क
LPC54113J256UK49Z - ARM Cortex-M4 256KB Flash MCU | NXP
LPC54113J256UK49Z

LPC54113J256UK49Z - ARM Cortex-M4 256KB Flash MCU | NXP

The NXP LPC54113J256UK49Z is a low-power 32-bit microcontroller from the LPC541xx family, featuring a single ARM Cortex-M4 core running at up to 100 MHz, 256 KB of on-chip Flash, and 192 KB of SRAM, packaged in a 49-pin WLCSP (3.44 x 3.44 mm). The device targets power-efficient always-on applications where a balance of compute throughput and energy budget is critical. It is the single-core variant (no Cortex-M0+ coprocessor) of the LPC5411x series, designed to minimize active and sleep current while retaining DSP and FPU capability at the M4 core. What is an ARM Cortex-M4 microcontroller? A Cortex-M4 MCU is a 32-bit RISC processor designed by Arm and licensed to silicon vendors; it is part of the Cortex-M family which sits under the broader Arm architecture umbrella. MCUs integrate CPU core, memory (Flash/SRAM), peripherals (ADC, timers, communication blocks), and power management on a single die, serving the role of the central controller in an embedded system. The Cortex-M4 specifically introduces single-precision FPU and DSP extensions versus the Cortex-M3, while remaining pin- and tool-compatible for code that does not use the FPU. Key features of the LPC54113J256UK49Z include a 12-bit resolution ADC, 37 configurable I/O pins, an operating voltage range of 1.62 V to 3.6 V, and an extended industrial temperature range from -40 C to +105 C. The WLCSP-49 package occupies only ~11.8 mm squared of PCB area, making it suitable for compact wearables and sensor nodes where board real estate is constrained. The LPC541xx architecture uses a low-leakage process with multiple low-power modes (Sleep, Deep-Sleep, Power-down, Deep Power-down) and a flexible ROM-based boot loader. Peripherals include multiple USART, SPI, I2C interfaces, timers, and a 12-bit ADC with sample rates suitable for sensor acquisition. Typical applications include IoT sensor nodes, wearable health monitors, BLE-enabled HID devices, low-power wireless sensor hubs, and battery-powered industrial sensor endpoints where the M4's signal-processing capability is combined with aggressive sleep-current management. Design consideration: The WLCSP package requires careful PCB pad design and under-bump metallization; reflow profile must follow JEDEC J-STD-020 MSL handling rules to avoid package cracking. Confirm that your in-house manufacturing supports WLCSP assembly before committing to this variant. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet, and reflects verified web data as of 2026-10-08.

RFQ संपर्क
LPC54606J256ET180551 - 180MHz Cortex-M4 MCU 256KB | NXP
LPC54606J256ET180551

LPC54606J256ET180551 - 180MHz Cortex-M4 MCU 256KB | NXP

The NXP LPC54606J256ET180551 is a 32-bit ARM Cortex-M4 microcontroller operating at up to 180 MHz with 256 KB of on-chip flash memory, housed in a 180-ball TFBGA (12 x 12 mm) package. It belongs to the LPC546xx family, which NXP positions for embedded applications requiring a rich peripheral set, very low power consumption, and enhanced debug features. A microcontroller (MCU) is a single integrated circuit that combines a processor core, program memory, data memory, and peripherals such as timers, ADCs, and communication interfaces. Within the semiconductor hierarchy, the LPC54606 sits under the category of 32-bit microcontrollers -> ARM Cortex-M4 based MCUs -> general-purpose embedded processors. The Cortex-M4 core adds DSP instructions and single-cycle MAC, letting the LPC546xx family support complex algorithms in data-intensive applications. Key features of the LPC54606J256ET180551 include the 180 MHz Cortex-M4 core, 262 KB (256 KB usable) of flash program memory, 145 general-purpose I/O lines, integrated ADC channels, DMA channels, and PWM outputs. The TFBGA-180 (12x12 mm) ball grid array provides high I/O density in a compact surface-mount footprint suitable for two-sided PCB assembly. Technically, the LPC546xx family combines the power efficiency of the Arm Cortex-M4 core with multiple high-speed connectivity options and advanced timers, per the NXP LPC546xx product data sheet. External memory interfaces extend the on-chip flash, and the family scales up to 512 KB flash, which protects software investment across memory variants. The 21-bit address bus and 16-bit external data bus support memory-mapped expansion. Typical applications include industrial automation and motor control (leveraging PWM outputs and ADC channels), consumer and IoT devices requiring high GPIO counts, and embedded systems needing DSP-class signal processing such as digital filtering and sensor fusion. When designing with this device, verify the exact ordering-code suffix: the 551 suffix denotes a specific packing/reel option of the LPC54606J256ET180, and the E variant (LPC54606J256ET180E) is the related ordering code seen at distributors - always cross-check pinout and temperature range on the LPC546xx datasheet before finalizing the BOM. This page synthesizes distributor pricing, drop-in alternatives from the same pin-compatible LPC546xx TFBGA-180 family, and practical design notes not found in a single manufacturer datasheet, providing unique cross-reference and selection value.

RFQ संपर्क
LPC54606J512BD100E - 220MHz Cortex-M4 MCU 512KB Flash | NXP
LPC54606J512BD100E

LPC54606J512BD100E - 220MHz Cortex-M4 MCU 512KB Flash | NXP

The NXP LPC54606J512BD100E is a power-efficient 32-bit ARM Cortex-M4 microcontroller with FPU and DSP instructions, operating at up to 220 MHz, integrating 512 KB of on-chip Flash and 200 KB SRAM in a 100-pin LQFP package (14x14 mm). It supports a wide 1.71V to 3.6V supply range and is rated -40C to +105C for industrial environments. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash for program code and SRAM for data), peripherals, and I/O. The Cortex-M4 is an ARM processor core designed for embedded applications, combining deterministic interrupt response with DSP extensions and a single-precision floating-point unit (FPU). The LPC546xx family in particular targets low-power, high-performance applications, sitting in the ARM Cortex-M4 tier below Cortex-M7 but above Cortex-M0+ devices in computational capability. Key features include a quad SPI Flash Interface (SPIFI) for low-cost memory expansion, one high-speed and one full-speed USB controller (host/device), 10/100 Ethernet with AVB support, CAN FD, an LCD controller, a Smart Card Interface, SD/MMC, an External Memory Controller (EMC), and a DMIC subsystem with PDM microphone interface. Twelve 12-bit ADCs and a 10-bit DAC support analog signal acquisition, while 21 communication interfaces aggregate data for IoT gateways. The device uses a Cortex-M4 core with single-precision FPU, DSP/SIMD instructions, and a Memory Protection Unit. An internal oscillator with PLL generates the 220 MHz system clock, and a low-power RTC with separate battery domain supports sleep modes drawing only a few microamperes, enabling battery-backed always-on designs. Typical applications include industrial HMI with LCD, IoT gateways aggregating multiple sensor buses, smart energy metering with CAN FD, audio front ends with PDM microphones, and connected medical devices needing Ethernet/USB. The integrated peripherals replace several external components, shrinking BOM and PCB area. When designing, choose MCUXpresso SDK for firmware development and provision the SWD/JTAG interface for debug. Place 100 nF + 10 uF decoupling close to each VDD pin and route VDD/VSS pairs symmetrically. This page synthesizes distributor pricing across DigiKey, Mouser, Arrow and Heisener, verified cross-reference alternatives, and practical design notes not consolidated on the manufacturer product page.

RFQ संपर्क
LPC54S001JEV180 - 180MHz ARM Cortex-M4 MCU, 4MB Flash | NXP
LPC54S001JEV180

LPC54S001JEV180 - 180MHz ARM Cortex-M4 MCU, 4MB Flash | NXP

The NXP LPC54S001JEV180 is a 180 MHz ARM Cortex-M4 microcontroller with FPU, 4 MB on-chip flash, and integrated security features, housed in a 180-pin LBGA package. It belongs to the LPC54S0xx family (the secure variant of the LPC540xx series), engineered for embedded applications demanding low power, rich peripherals, and enhanced debug. An ARM Cortex-M4 microcontroller (MCU) is a 32-bit processor core built on the ARMv7-M architecture, optimized for deterministic real-time control. The Cortex-M4 sits in the broader taxonomy of microcontrollers -> embedded processors -> semiconductors -> integrated circuits. The 'S' in LPC54S0xx denotes the security-enabled sub-family, adding features such as hardware cryptography, secure boot, and a secure key storage unit not present in the standard LPC540xx line. These features position the part for connected, IP-protected embedded products. Key features include a 180 MHz Cortex-M4 core with single-precision FPU and MPU, up to 4 MB on-chip flash, up to 360 KB SRAM, and a peripheral complement that includes multiple high-speed serial interfaces, an LCD controller, and a 12-bit ADC. Power-saving modes and on-chip voltage regulation minimize active and standby consumption, while the Secure Boot / Hardware Crypto engine supports AES, SHA, and secure key storage. The LBGA-180 package provides the pin count required to expose the full peripheral set without multiplexing. Architecturally, the LPC54S0xx family uses a low-power 90 nm process and integrates an on-chip DC-DC converter that powers the core from a single external supply, simplifying board design. The bus matrix supports parallel peripheral access for deterministic DMA throughput, and the MPU enables isolation of trusted and untrusted code regions - a foundational primitive for security-aware firmware. Typical applications include secure IoT gateways, industrial HMI with rich graphics, smart-metering endpoints, and embedded point-of-sale terminals where cryptographic acceleration and tamper detection are required. The device is also used in factory-automation controllers and connected medical peripherals requiring deterministic real-time response. When designing with this part, ensure the LBGA-180 land pattern and stack-up support the 0.8 mm ball pitch, and provide a clean 3.3 V supply with adequate bulk decoupling. Migration from the pin-compatible LPC546xx is supported per NXP application note AN13168, though the JxM variants are not compatible due to internal QSPI flash. This page synthesizes the LPC54S001JEV180 datasheet, parametric comparison against same-family variants, drop-in alternatives, and practical design notes that go beyond the manufacturer product page.

RFQ संपर्क
LPC54S018JET180E - 180MHz Cortex-M4 MCU, 360KB SRAM | NXP
LPC54S018JET180E

LPC54S018JET180E - 180MHz Cortex-M4 MCU, 360KB SRAM | NXP

The NXP Semiconductors LPC54S018JET180E is a 32-bit ARM Cortex-M4 microcontroller from the LPC540xx family, operating at 180 MHz and housed in a 180-TFBGA (12x12 mm) package with 145 I/O pins. It is a ROMless security-enhanced variant delivering 360 KB of on-chip SRAM and is built around a Harvard architecture with a 3-stage pipeline for high-throughput deterministic performance. According to the NXP product page and distributor listings, this part targets next-generation IoT endpoints that need real-time responsiveness with hardware cryptography. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile and non-volatile memory, and a rich set of peripherals such as timers, communication controllers and analog blocks. The LPC54S018JET180E sits in the Cortex-M4 tier of ARM's embedded roadmap: M4 adds DSP extensions and single-precision floating point on the same Thumb-2 ISA foundation shared with Cortex-M0/M0+/M3, making it suitable for signal processing as well as control. The 'S' suffix in the part number denotes the security-enhanced sub-family with hardware AES, secure boot and TrustZone-M style isolation, while the '0' indicates ROMless operation that pairs with external SPIFI flash. Key differentiating features of the LPC54S018JET180E include a high-speed USB 2.0 controller with on-chip PHY (host+device), a 10/100 Ethernet MAC with AVB support, an LCD interface capable of driving TFT panels directly, and a quad-SPI Flash Interface (SPIFI) for low-cost program memory expansion. Communication peripherals include CAN FD, two CAN 2.0B controllers, smart-card interfaces, I2S, DMIC/PDM microphone input, SD/MMC, and an External Memory Controller (EMC) for SRAM/PSRAM/NOR/NAND expansion. The 360 KB of SRAM is large for the class and lets designers keep full TCP/IP stacks or graphics framebuffers in RAM. Typical applications for this MCU are industrial HMI panels with TFT LCD, secure IoT gateways combining Ethernet AVB and CAN FD, point-of-sale terminals requiring smart-card interfaces, audio front-ends with PDM microphones, and connected appliances that need both USB device and Ethernet. The security extensions make it a strong fit for any design that demands secure boot, encrypted firmware updates or hardware key storage. When designing with the LPC54S018JET180E, ensure the SPIFI flash is selected with the correct boot mode and that decoupling on the 3.3 V and 1.2 V rails follows NXP's recommended LC network in the data sheet. The 180-TFBGA package demands 4-layer or higher PCB stack-ups with via-in-pad or dog-bone fan-outs, and the package thermal resistance allows operation up to 105 °C junction temperature with proper copper. This page synthesizes distributor pricing from DigiKey and Mouser, package-level drop-in alternatives from the same LPC54(S)0xx family, and practical design notes that complement the NXP LPC54018JxM/LPC54S018JxM data sheet.

RFQ संपर्क
LPC5526JBD64E - Cortex-M33 150MHz 256KB MCU | NXP
LPC5526JBD64E

LPC5526JBD64E - Cortex-M33 150MHz 256KB MCU | NXP

The NXP LPC5526JBD64E is a 32-bit Arm Cortex-M33 microcontroller running at up to 150 MHz with 256 KB on-chip flash memory, housed in a 64-pin HTQFP (10x10 mm) package. It belongs to the LPC552x/S2x family within the EdgeVerse edge computing platform, the world's first general-purpose Cortex-M33-based MCU series. A microcontroller (MCU) is a single-chip embedded computer integrating a processor core, memory, and peripherals on one die. The LPC5526 sits in the general-purpose MCU hierarchy: Arm Cortex-M33 core -> 32-bit embedded microcontroller -> NXP LPC5500 family -> EdgeVerse edge computing platform. Arm TrustZone technology provides hardware-enforced security partitioning, a differentiator versus older Cortex-M4/M3 parts. Key features include the Cortex-M33 (Armv8-M mainline) core with a Memory Protection Unit (MPU), built-in Nested Vectored Interrupt Controller (NVIC), and an NMI input with selectable sources. The device leverages a cost-effective 40-nm NVM process technology. According to NXP, the LPC552x/S2x family offers pin-, software-, and peripheral-compatibility across family members, accelerating time to market. The 150 MHz core frequency with dual-bank flash execution supports demanding control and signal-processing workloads. The 256 KB flash accommodates complex application firmware plus in-system programming headroom, while the rich peripheral set (per the manufacturer datasheet) serves mixed-signal embedded designs. Typical applications include industrial automation and motor control, IoT edge nodes requiring TrustZone security, consumer appliances, and embedded sensing systems where 150 MHz 32-bit performance is needed without the cost of larger LPC55S6x parts. Design consideration: confirm the exact RAM size, supply voltage range, and peripheral counts against the manufacturer datasheet before finalizing the schematic, as these values vary within the family. The package_svg and footprint for the 64-HTQFP is shared across all LPC552x JBD64 variants, enabling PCB reuse during memory or security upgrades. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ संपर्क
LPC5526JBD64K - 150MHz Cortex-M33 MCU, 256KB Flash | NXP
LPC5526JBD64K

LPC5526JBD64K - 150MHz Cortex-M33 MCU, 256KB Flash | NXP

The NXP LPC5526JBD64K is a 32-bit Arm Cortex-M33 microcontroller running at up to 150 MHz with 256 KB of on-chip flash memory, housed in a 64-pin HTQFP (10x10 mm) exposed-pad package and supplied in tray packaging. It belongs to the LPC552x/S2x MCU family within NXP's EdgeVerse edge computing platform, the world's first general-purpose Cortex-M33-based MCU series, fabricated on a cost-effective 40-nm NVM process technology. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals into one chip, forming the lowest tier of the embedded processing hierarchy: MCU -> microcontroller -> embedded processor -> semiconductor device. MCUs execute dedicated control tasks in electronic systems, and the LPC552x family extends this role with hardware-based security and dual-core scalability. Key features of the LPC5526JBD64K include the Arm Cortex-M33 core (r0p3) with a Memory Protection Unit (MPU) and built-in Nested Vectored Interrupt Controller (NVIC), a non-maskable interrupt (NMI) input with selectable sources, and a FlexComm serial interface architecture that lets each instance be configured as UART, SPI, or I2C. The family datasheet also documents CASPER cryptographic co-processor support, USB high-speed, SDIO, SCTimer/PWM, a Programmable Logic Unit (PLU), and a 16-bit 1.0 Msamples/sec ADC across the LPC552x/S2x series. Technical depth comes from the 40-nm process node, which lowers cost per function while the Cortex-M33 with TrustZone-class security features addresses modern IoT security requirements. The PLU allows logic customization without an FPGA, and the FlexComm structure reduces external glue logic. Typical applications include industrial control nodes, IoT edge devices requiring secure connectivity, and consumer appliances needing motor control, USB connectivity, and analog sensing. The 1.0 Msps ADC and SCTimer/PWM directly serve these use cases. A key design consideration: the 64-pin HTQFP with exposed pad requires a well-designed thermal and ground land pattern on the PCB for reliable power delivery and signal integrity at 150 MHz. This page synthesizes distributor pricing, drop-in family alternatives, and design guidance not found in the manufacturer datasheet.

RFQ संपर्क
LPC5526JBD64Y - 150MHz Cortex-M33 MCU 256KB | NXP
LPC5526JBD64Y

LPC5526JBD64Y - 150MHz Cortex-M33 MCU 256KB | NXP

The NXP LPC5526JBD64Y is a 32-bit Arm Cortex-M33 microcontroller running at up to 150 MHz with 256 KB on-chip flash memory and 256 KB SRAM, housed in a 64-pin HTQFP (10 x 10 mm) package from the LPC552x/S2x family. A microcontroller (MCU) is a single-chip embedded computer that integrates a processor core, memory, and peripherals such as UART, SPI, I2C, and USB onto one die. MCUs sit at the device level of the embedded hierarchy - below SoCs and application processors but above simple logic ICs - and are the workhorses of industrial control, IoT nodes, and consumer appliances. The LPC5526 belongs to general-purpose flash MCUs, specifically the Arm Cortex-M class of 32-bit embedded processors. Key features of the LPC5526JBD64Y include the Arm Cortex-M33 core (r0p3) with a Memory Protection Unit (MPU), a built-in Nested Vectored Interrupt Controller (NVIC), and a non-maskable interrupt (NMI) input with selectable sources. The family leverages a cost-effective 40-nm NVM process technology and is part of NXP's EdgeVerse edge computing platform. Flexcomm serial connectivity supports I2C, SDIO, SPI, and UART/USART, alongside USB. The CASPER hardware co-processor accelerates cryptographic arithmetic, a family hallmark that offloads security workloads from the CPU. A major strength of the LPC552x/S2x family is pin-, software-, and peripheral-compatibility across members, allowing developers to scale memory and performance without board redesign. The 150 MHz core clock delivers roughly double the throughput of mainstream Cortex-M4 parts at similar power, and the Cortex-M33 TrustZone-capable architecture future-proofs security-sensitive designs. Typical applications include industrial automation and motor control, IoT edge nodes with secure connectivity, and consumer appliances requiring USB device connectivity. The Flexcomm architecture lets each serial block be dynamically assigned as UART, SPI, or I2C, reducing external component count. For design, budget the 150 MHz core current against your supply rail and use NXP's MCUXpresso Config Tools for pin muxing and clock setup before PCB routing. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet, as of 2026-10-12.

RFQ संपर्क
LPC5528JBD64K - Cortex-M33 150MHz 512KB Flash MCU | NXP
LPC5528JBD64K

LPC5528JBD64K - Cortex-M33 150MHz 512KB Flash MCU | NXP

The NXP Semiconductors LPC5528JBD64K is a 32-bit ARM Cortex-M33 microcontroller running at up to 150 MHz with 512 KB of on-chip flash memory, supplied in a 64-pin HTQFP (10x10 mm) package with exposed pad in tray packaging. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals onto one die, forming the lowest tier of the embedded computing hierarchy: MCU -> embedded processor -> application processor -> system-on-chip. The LPC5528 belongs to the LPC552x/S2x family, which is part of the EdgeVerse edge computing platform and extends the world's first general-purpose Cortex-M33-based MCU series with pin-, software- and peripheral-compatibility across family members. Key features of the LPC5528JBD64K include the ARM Cortex-M33 core (r0p3) at 150 MHz with a Memory Protection Unit (MPU), the built-in Nested Vectored Interrupt Controller (NVIC), and an NMI input with selectable sources. The device leverages the cost-effective 40-nm NVM process technology and operates from a 3.3V supply across a -40C to +105C industrial temperature range. Technically, the Cortex-M33 combines the ARMv8-M mainline architecture with DSP instructions and TrustZone-style security foundations, giving the LPC5528 strong computation-per-milliamp characteristics for real-time control and edge processing. Family members differ mainly in flash size and security features, allowing PCB and firmware reuse across the LPC552x/S2x range. Typical applications include industrial automation and motor control, IoT edge nodes and sensor hubs, and consumer/appliance control boards requiring a 150 MHz-class 32-bit MCU with industrial temperature qualification. Design consideration: confirm the exact RAM size, peripheral set, and GPIO count against the official NXP LPC5528 datasheet before layout lock, since family members share the HTQFP-64 footprint but differ in memory options. This page synthesizes distributor pricing (LCSC, Mouser, DigiKey), drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ संपर्क
LPC55S26JBD64E - 150MHz Cortex-M33 MCU 256KB Flash | NXP
LPC55S26JBD64E

LPC55S26JBD64E - 150MHz Cortex-M33 MCU 256KB Flash | NXP

The NXP LPC55S26JBD64E is a 32-bit Arm Cortex-M33 microcontroller running at up to 150 MHz, with 256 KB on-chip flash memory and 256 KB SRAM, housed in a 64-pin HTQFP (10 x 10 mm) surface-mount package. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and programmable peripherals onto one die, sitting at the center of embedded system hierarchies: microcontroller -> embedded processor -> system-on-chip -> semiconductor device. The LPC552x/S2x family belongs to the broader LPC5500 MCU series within NXP's EdgeVerse edge computing platform, and was the world's first general-purpose Cortex-M33-based MCU series, offered on a cost-effective 40-nm NVM process technology. Key features of the LPC55S26 include the Arm Cortex-M33 core (r0p3) with a Memory Protection Unit (MPU), a built-in Nested Vectored Interrupt Controller (NVIC), and a non-maskable interrupt (NMI) input with selectable sources. The device integrates CASPER hardware cryptography co-processor, USB high-speed (USB HS), FlexComm serial interfaces, SDIO, 32-bit counter/timers, SCTimer/PWM, a Programmable Logic Unit (PLU), a 16-bit 1.0 Msamples/sec ADC, analog comparators, and an on-chip temperature sensor. Security is addressed through AES, PUF, SHA, CRC, and a true random number generator (RNG). Architecturally, the FlexComm concept lets each serial block be configured as USART, SPI, I2C, or I2S, maximizing pin flexibility on the 64-pin package. The PLU allows combinational-logic custom peripherals without CPU load, a distinctive advantage over conventional MCUs. Typical applications include industrial IoT nodes, general embedded control, secure connected devices, and motor-control or sensing front ends that leverage the 1 Msps ADC and PWM timers. Design consideration: verify power sequencing and configure the FlexComm muxes early in firmware, since pin functions default per the UM at reset and the secure boot chain (PUF/AES) must be provisioned before locking the flash. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ संपर्क
LPC55S26JBD64K - 150MHz Cortex-M33 MCU 256KB Flash | NXP
LPC55S26JBD64K

LPC55S26JBD64K - 150MHz Cortex-M33 MCU 256KB Flash | NXP

The NXP LPC55S26JBD64K is a 32-bit microcontroller based on the Arm Cortex-M33 core running at up to 150 MHz, with 256 KB of on-chip flash memory and 144 KB of SRAM, housed in a 64-pin HTQFP (10 x 10 mm) package rated from -40C to +105C. As a member of the LPC55S2x secure MCU family within NXP's EdgeVerse edge computing platform, it integrates Arm TrustZone technology for hardware-based security. A microcontroller (MCU) is a single-chip computer combining a processor core, memory, and peripherals on one die. Within the embedded systems hierarchy, the LPC55S26 sits in the general-purpose Cortex-M class of microcontrollers, above entry-level Cortex-M0+ devices and below high-performance Cortex-M7/M55 parts, serving as the central control element in embedded electronic systems. Key features include the world's-first general-purpose Cortex-M33 architecture, hardware TrustZone security, a Memory Protection Unit (MPU), and a Nested Vectored Interrupt Controller (NVIC). Pin-, software-, and peripheral-compatibility across the LPC552x/S2x family lets designers scale memory and security options without redesigning the PCB, accelerating time to market while controlling cost. Technically, the device executes from dual-bank flash allowing code execution in parallel with erase/write operations, and the Cortex-M33 pipeline delivers deterministic real-time performance at 150 MHz. The S-series suffix denotes the security-enabled variant with TrustZone, crypto support, and secure boot capabilities compared with the non-secure LPC552x versions. Typical applications include industrial automation and control, IoT edge nodes, access control and secure connectivity, motor control, and consumer appliances. The combination of security, performance, and -40C to +105C operation fits demanding industrial environments. Design consideration: budget the 144 KB SRAM carefully between the two banks, and plan secure vs non-secure memory partitioning early, since TrustZone attribution affects flash and SRAM allocation at build time. This page synthesizes distributor pricing (as of 2026-10-12), same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ संपर्क
LPC55S26JBD64Y - 150MHz Cortex-M33 MCU 256KB | NXP
LPC55S26JBD64Y

LPC55S26JBD64Y - 150MHz Cortex-M33 MCU 256KB | NXP

The NXP Semiconductors LPC55S26JBD64Y is a 32-bit Arm Cortex-M33 microcontroller running at up to 150 MHz with 256 KB of on-chip flash memory, housed in a 64-pin HTQFP (10 x 10 mm) package with exposed pad. A microcontroller (MCU) is a single-chip embedded computer that integrates a processor core, program memory (flash), data memory (SRAM), and peripherals such as UART, SPI, I2C, USB, and ADC on one die. Within the power-management hierarchy of embedded systems, MCUs sit at the lowest level of programmable control, directly driving sensors, actuators, and communication interfaces. The LPC55S26JBD64Y belongs to the LPC552x/S2x family, part of NXP's EdgeVerse edge computing platform and the world's first general-purpose Cortex-M33-based MCU series. Key features include a 150 MHz Cortex-M33 core, 256 KB (256K x 8) of flash program memory, and a 40-nm NVM process technology for cost-effective, power-efficient operation. The LPC55S2x variants add NXP security features for protected firmware and data, while remaining pin-, software-, and peripheral-compatible across the family - a major advantage for developers scaling designs between memory or security tiers. Technically, the Armv8-M mainline architecture supports TrustZone-style security partitioning concepts in the S-series, and the high clock speed combined with single-cycle multiply accelerators delivers DSP-class throughput for signal processing. The exposed-pad HTQFP-64 improves thermal performance and grounding compared with standard gull-wing packages, and the industrial temperature grade supports harsh environments. Typical applications include industrial automation and motor control, IoT edge nodes and sensor hubs, and consumer appliances or secure connected devices requiring low-power 32-bit processing. The 150 MHz core and rich peripheral set make the device a strong fit for USB-enabled products and analog-sensing systems with on-chip ADC inputs. When designing with the LPC55S26JBD64Y, allocate decoupling capacitance on all VDD pins, route the exposed pad to a solid ground plane, and plan firmware for the 256 KB flash boundary if code growth is expected - the pin-compatible LPC55S28 doubles flash within the same footprint. This page synthesizes distributor inventory data, same-family drop-in alternatives, and practical design guidance not consolidated on the manufacturer's own product page.

RFQ संपर्क