माइक्रोकंट्रोलर्स

उत्पाद (20,000+)

R7F7016844AFP-C#BA1 - 32-bit 120MHz 3MB Flash Automotive MCU | Renesas
R7F7016844AFP-C#BA1

R7F7016844AFP-C#BA1 - 32-bit 120MHz 3MB Flash Automotive MCU | Renesas

The Renesas R7F7016844AFP-C#BA1 is a 32-bit single-core automotive microcontroller from the RH850/F1KM-S1 family, operating at up to 120 MHz on the RH850G3KH CPU core, with 3 MB of embedded flash memory, housed in a 100-pin LFQFP (14 x 14 mm) package and qualified to AEC-Q100 for automotive use. A microcontroller (MCU) is a single-chip integrated circuit that combines a processor core, memory, and peripherals into one device, forming the lowest tier of embedded processing hierarchy: MCU -> embedded processor -> application processor -> semiconductor. The RH850/F1KM-S1 group is a member of the RH850/F1x series, which Renesas designed specifically for automotive electrical body applications such as body control modules, chassis systems, and gateway nodes. Key features of this device include the 120 MHz RH850G3KH single-core CPU, 3 MB (3M x 8) on-chip flash memory for code storage, an integrated CAN FD interface for modern in-vehicle networking, and low power consumption typical of the F1KM family. Package options across the F1KM-S1 series span 48 to 100 pins, with flash densities from 512 KB to 3 MB, allowing designers to scale a single design across multiple cost tiers. The RH850 architecture provides automotive-grade functional safety support, and the AEC-Q100 qualification ensures reliability over the automotive temperature range. The CAN FD peripheral enables higher data throughput than classical CAN while preserving backward compatibility with existing vehicle networks. Typical applications include automotive body control units, chassis control units, door modules, lighting control, and driver assistance support nodes. The combination of 3 MB flash and CAN FD makes this part suitable for software-rich body domain controllers. Design consideration: verify the exact flash density and option-byte suffix (#BA1 vs #AA1) against the Renesas datasheet before layout, as family members share the same footprint but differ in memory. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ संपर्क
R7F7016903AFP-C - 32-Bit MCU 120MHz 1MB Flash | Renesas
R7F7016903AFP-C

R7F7016903AFP-C - 32-Bit MCU 120MHz 1MB Flash | Renesas

The R7F7016903AFP-C is a high-end automotive microcontroller from Renesas Electronics, part of the RH850/F1KM-S1 series, designed for body control applications. It features a 32-bit RH850G3KH CPU core running at up to 120 MHz, with 1MB (1M x 8) of internal flash memory and 64-LFQFP (10x10) package. This MCU is engineered for low power consumption while delivering robust performance for automotive electrical body systems. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory (flash and RAM), and programmable input/output peripherals. In the automotive domain, MCUs like the RH850/F1KM-S1 series are essential for body control modules, gateway modules, and motor control, providing real-time control and communication capabilities. The RH850/F1x series is a family of 32-bit automotive microcontrollers from Renesas, known for their high reliability and functional safety features. Key features of the R7F7016903AFP-C include a 120 MHz RH850G3KH core, 1MB flash memory, and a 64-pin LFQFP package. It supports a wide operating temperature range of -40°C to +125°C, making it suitable for harsh automotive environments. The device is AEC-Q100 qualified, ensuring compliance with automotive quality standards. It also includes a variety of communication interfaces such as CAN, LIN, and SPI, enabling seamless integration into vehicle networks. Technically, the RH850/F1KM-S1 series is built on Renesas' advanced 40nm process technology, offering a balance of performance and power efficiency. The MCU features a floating-point unit (FPU) for enhanced mathematical processing, and a memory protection unit (MPU) for safety-critical applications. It also supports on-chip debugging and flash programming, facilitating development and field updates. Typical applications include automotive body control modules (BCM), central gateway modules, and motor control for power windows, seats, and mirrors. The MCU's robust communication interfaces and low power consumption make it ideal for always-on systems in vehicles. When designing with this MCU, ensure proper decoupling of power supply pins and consider thermal management for high-temperature environments. The 64-LFQFP package requires careful PCB layout to minimize noise and ensure reliable operation.

RFQ संपर्क
R7FA6M2AF3CFP#AA0 - 120MHz Arm Cortex-M4 MCU, 1MB Flash, 100-LFQFP | Renesas
R7FA6M2AF3CFP#AA0

R7FA6M2AF3CFP#AA0 - 120MHz Arm Cortex-M4 MCU, 1MB Flash, 100-LFQFP | Renesas

The Renesas R7FA6M2AF3CFP#AA0 is a 32-bit microcontroller from the RA6M2 group, integrating an Arm Cortex-M4 core with FPU and DSP extensions running at 120 MHz, 1 MB of flash memory and 384 KB of SRAM, housed in a 100-pin LFQFP (14x14 mm) package. According to Renesas product page data, the device combines Ethernet MAC with DMA, USB 2.0 Full-Speed, CAN FD, and a 12-bit ADC, targeting connected industrial and IoT edge nodes. An Arm Cortex-M4 microcontroller is a 32-bit MCU class member of the ARM Cortex-M family, characterized by a Harvard architecture, hardware single-precision floating-point unit, DSP extensions, deterministic interrupt handling via NVIC, and low power modes. Within the hierarchy, Cortex-M4 sits between Cortex-M3 (no FPU) and Cortex-M7 (higher performance); the broader family lineage covers Cortex-M0/M0+/M3/M4/M7/M23/M33, and ultimately belongs to the semiconductor > integrated circuit > microcontroller > 32-bit MCU > ARM-based MCU product type tree. Key specifications of this part include a 120 MHz maximum CPU clock, 1 MB code flash, 384 KB SRAM, a 12-bit A/D converter with multiple channels, Ethernet MAC, USB 2.0 FS, CAN FD, multiple serial interfaces (SCI/SPI/I2C), and a wide operating voltage range typically from 2.7 V to 3.6 V. According to the Renesas RA6M2 group datasheet, this device also features security extensions, capacitive touch sensing, and a low-power RTC. The R7FA6M2AF3CFP#AA0 is built on a low-power CMOS process and uses the Armv7E-M architecture with a 3-stage pipeline. Its integration of Ethernet and USB on-chip reduces external component count for connected products. The peripheral set is software- and pin-compatible with other RA6 series devices, enabling scalability across the Renesas RA family platform. Typical applications include industrial sensor hubs, building automation controllers, IoT edge gateways with Ethernet, HMI panels, and motor-control auxiliary MCUs. The Ethernet MAC plus CAN FD combination supports Industry 4.0 nodes bridging fieldbus and corporate networks. When designing with this device, ensure the 100-LFQFP land pattern is properly cooled via copper pour; the on-chip Ethernet PHY interface requires a reference clock and magnetics. Use Renesas e2 studio IDE and the RA Flexible Software Package (FSP) for firmware development. This page synthesizes distributor pricing, parametric tables, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers evaluate and source the R7FA6M2AF3CFP#AA0 for production designs.

RFQ संपर्क
R7FS3A37A3A01CFM#BA0 - 48MHz Cortex-M4 512KB Flash MCU | Renesas
R7FS3A37A3A01CFM#BA0

R7FS3A37A3A01CFM#BA0 - 48MHz Cortex-M4 512KB Flash MCU | Renesas

The Renesas R7FS3A37A3A01CFM#BA0 is a 32-bit ARM Cortex-M4 microcontroller from the Synergy S3A3 platform group, integrating 512 KB of flash memory and 96 KB of SRAM, housed in a 64-pin LFQFP (10x10 mm) package. Operating at up to 48 MHz, the part belongs to the S3A3 MCU group optimized for portable medical and fitness devices with smart connected sensors, balancing low power consumption with Cortex-M4 class performance including single-precision FPU and DSP extensions. What is a Synergy S3A3 MCU? The Renesas Synergy Platform is a complete embedded solution combining microcontrollers, software APIs, and development tools. The S3 series represents the mainstream tier; the S3A3 sub-group targets low-power connected IoT endpoints. As a microcontroller (MCU), this device is a system-on-chip containing CPU, memory, and peripherals on a single die. MCUs hierarchically sit within microcontrollers -> embedded processors -> semiconductors -> integrated circuits. The Cortex-M4 core supports the Thumb-2 instruction set and is tailored for deterministic real-time control in resource-constrained applications. Key features of the R7FS3A37A3A01CFM#BA0 include 512 KB on-chip flash (512K x 8 organization), 96 KB SRAM (96K x 8 organization), 48 MHz maximum CPU clock, integrated single-precision FPU, and a rich peripheral set spanning multiple serial interfaces, timers, and ADC channels typical of the Synergy S3A3 group. The 64-LFQFP package provides an exposed pad option, simplifying PCB thermal dissipation for industrial-grade operation across the -40C to +105C temperature range. Architecturally, the S3A3 leverages ARM Cortex-M4 with hardware acceleration for DSP and floating-point math, paired with Renesas proprietary peripheral IP shared across the Synergy family for code portability. The flash/SRAM ratio favors embedded applications requiring larger firmware images but modest working memory, suiting connected sensor hubs and HMI subsystems. Typical applications span portable medical and fitness devices, smart connected sensor nodes, industrial IoT endpoints, low-power wireless gateways, consumer health monitors, and battery-powered HMI panels. The combination of low active power, Cortex-M4 performance, and the Synergy software ecosystem shortens time-to-market for connected embedded products. When designing with this MCU, verify the LFQFP-64 land pattern matches your PCB footprint and ensure the Synergy Software Package (SSP) version is compatible with your toolchain. For migration to pin-compatible variants, check the same-family MPNs in the alternatives section below. This page synthesizes distributor stock data, parametric specifications, drop-in alternatives from the same Synergy S3A3 family, and practical design considerations not consolidated on a single manufacturer page.

RFQ संपर्क
R7S721000VCFP#AA1 - ARM Cortex-A9 RZ/A1H 400MHz MPU | Renesas
R7S721000VCFP#AA1

R7S721000VCFP#AA1 - ARM Cortex-A9 RZ/A1H 400MHz MPU | Renesas

The Renesas R7S721000VCFP#AA1 is a high-performance ARM Cortex-A9 microprocessor from the RZ/A1H family, featuring a single 32-bit core running at 400 MHz, 10 MB of on-chip SRAM, and housed in a 256-pin LQFP package measuring 28x28 mm. The device targets embedded human-machine interface (HMI) and graphics applications where external memory bus design and procurement are major pain points for product longevity. A microprocessor (MPU) is an integrated circuit that integrates a CPU core, memory controllers, and a rich set of peripheral interfaces onto a single die. The RZ/A1H belongs to the broader taxonomy of application processors (CPU core -> application processor -> microprocessor -> embedded processing IC -> semiconductor), sitting above microcontrollers (MCUs) by combining higher CPU frequency with extensive multimedia-oriented peripherals. The on-chip 10 MB SRAM eliminates the need for external SDRAM, simplifying PCB layout and BOM for compact HMI designs. Key features of the RZ/A1H include dual-display support up to WXGA resolution (1280x800), integrated 2D graphics accelerator, parallel camera interface for image sensor input, hardware JPEG codec, and a wide range of connectivity peripherals including USB 2.0 Host/Function, Ethernet MAC, I2C, SPI, and UART. The single-core Cortex-A9 at 400 MHz delivers approximately 1.0 DMIPS/MHz while keeping power consumption compatible with industrial temperature ranges. The device architecture pairs the Cortex-A9 core with 32 KB instruction and 32 KB data L1 caches, plus a NEON SIMD engine and a Floating Point Unit (FPU). Its internal bus matrix (AXI/AHB/APB) routes traffic to memory and peripherals with low latency. The 10 MB on-chip SRAM is organized for frame buffer use, supporting two simultaneous displays without external DRAM. Typical applications include industrial HMI panels, building automation touchscreens, medical patient interface displays, home appliance control panels, point-of-sale (POS) terminals, and portable information terminals. The combination of graphics, camera, and rich connectivity peripherals makes the RZ/A1H ideal for any design that needs a crisp visual interface without external memory complexity. When designing with this MPU, ensure the PCB thermal pad and power rails deliver stable 3.3 V core/IO supply with adequate decoupling. Designers should reserve sufficient PCB area for the 256-pin LQFP fanout and follow Renesas reference designs to avoid signal-integrity issues on high-speed display and memory interfaces. This page synthesizes distributor pricing, drop-in alternatives drawn from the same RZ/A1 family, and practical design notes not collected in a single place on the manufacturer datasheet, giving engineers an immediate snapshot for sourcing and reuse.

RFQ संपर्क
R7S721021VCFP#AA1 - RZ/A1L 400MHz ARM Cortex-A9 MPU 3MB SRAM
R7S721021VCFP#AA1

R7S721021VCFP#AA1 - RZ/A1L 400MHz ARM Cortex-A9 MPU 3MB SRAM

The Renesas R7S721021VCFP#AA1 is an ARM Cortex-A9 microprocessor from the RZ/A1L group, operating at 400 MHz with 3 MB of on-chip SRAM, packaged in a 208-pin LFQFP (28x28 mm). Designed for compact embedded designs, it integrates rich peripherals including Ethernet, USB 2.0 host/function, CAN, LIN, SCI, SPI, I2C, UART, and an external bus interface, and is ROMless so external flash is required for code storage. A microprocessor (MPU) is an integrated circuit containing a full CPU core plus system logic, distinguished from a microcontroller (MCU) by higher processing throughput, external memory addressing, and complex peripheral integration. The RZ/A1L sits in the hierarchy: MPU -> application processor -> SoC -> RISC ARM Cortex-A family -> Renesas RZ/A1L product line. With 3 MB of embedded SRAM, the part targets graphical HMI applications where eliminating external DRAM reduces BOM cost and EOL risk. Key features of the R7S721021VCFP#AA1 include single-core 32-bit ARM Cortex-A9 at 400 MHz, 3 MB on-chip SRAM, integrated TFT LCD controller supporting up to 2x WVGA (800x480) or one WSVGA (1024x600) display, 10/100 Ethernet MAC, USB 2.0 host/function with PHY, multiple CAN/LIN/SPI/I2C interfaces, 12-bit ADC, timers, PWM, real-time clock, and watchdog timer. Architecture-wise, the Cortex-A9 core is paired with NEON SIMD and a dual-issue pipeline. The 3 MB unified SRAM can serve as frame buffer and code execution area without external DRAM, lowering system cost. The integrated TFT LCD controller with hardware-accelerated 2D graphics (raster engine) simplifies HMI design. Typical applications include industrial HMI panels, building automation control displays, home appliances with graphical UI, point-of-sale terminals, and medical device interfaces. The chip's high memory bandwidth plus display controller make it suited for graphics-rich embedded products. When designing, note that this is a ROMless device, so external NOR/NAND flash is mandatory. Power sequencing and decoupling per the Renesas hardware manual are critical for reliable boot. Use the Renesas e2studio IDE and Smart Configurator for pin and clock setup. This page synthesizes distributor stock status, drop-in alternatives, thermal/PCB guidance, and pricing benchmarks from multiple sources - engineering content complementing the manufacturer datasheet.

RFQ संपर्क
RA8T2 - 1GHz Arm Cortex-M85 Motor Control MCU | Renesas
RA8T2

RA8T2 - 1GHz Arm Cortex-M85 Motor Control MCU | Renesas

The Renesas RA8T2 is a high-performance ASSP microcontroller featuring a 1 GHz Arm Cortex-M85 core paired with a 250 MHz Arm Cortex-M33 core, up to 1 MB of code MRAM, and 2 MB of SRAM with ECC, engineered specifically for industrial motor control applications requiring high real-time performance and high-precision control. A microcontroller (MCU) is a single-chip integrated circuit that combines a processor core, memory, and peripherals to execute dedicated control tasks. Within the hierarchy of embedded processors, the RA8T2 sits at the top of Renesas' RA family of Arm-based MCUs, above general-purpose Cortex-M4/M33 parts, and competes with high-end digital signal controllers in the industrial automation domain. Key features include over 7,000 CoreMark performance enabled by an advanced 22 nm process, advanced-function PWM and high-resolution PWM timers for precise motor drive waveforms, and high integration with a Layer 3 Ethernet Switch Module, USB 2.0 Full-Speed, CAN FD, SDHI, I3C, and Octal SPI with decryption on-the-fly. MRAM code storage provides fast, reliable non-volatile memory with high endurance compared to conventional Flash. Technically, the dual-core architecture separates high-speed field-oriented control (FOC) loops on the 1 GHz Cortex-M85 from communication stacks and supervisory tasks on the 250 MHz Cortex-M33, delivering deterministic real-time behavior. Hardware ECC on the 2 MB SRAM and functional-safety-oriented peripherals support demanding industrial equipment requirements. Typical applications include industrial servo drives, brushless DC (BLDC) and permanent magnet synchronous motor (PMSM) control, robotics, and high-end factory automation equipment where sub-microsecond control-loop latency is essential. EtherCAT-class industrial networking is supported via the Ethernet switch module. Design consideration: choose the correct speed-grade orderable part number (e.g., 1 GHz vs 600 MHz variants such as R7KA8T2LFLCAB#UC0 vs R7KA8T2AFECAB#BC1) and validate thermal design at full 1 GHz operation, as 22 nm high-frequency operation demands attention to power dissipation and PCB thermal relief. This page synthesizes distributor data, datasheet highlights, orderable-part variants, and practical design guidance not consolidated in the manufacturer datasheet alone.

RFQ संपर्क
RK3168 - Dual-Core Cortex-A9 SoC | Rockchip | Mobile/Embedded
RK3168

RK3168 - Dual-Core Cortex-A9 SoC | Rockchip | Mobile/Embedded

The Rockchip RK3168 is a low-power, high-performance dual-core ARM Cortex-A9 SoC for smartphones, tablets, personal mobile internet devices, and digital multimedia applications. The RK3168 integrates two Cortex-A9 cores with separate NEON and FPU coprocessors, a PowerVR SGX540 GPU clocked at 400 MHz, and a hardware video decoder supporting up to 1080p H.264/MJPEG/VC-1/MPEG-4, all in a low-power BGA package. A SoC (System-on-Chip) is an integrated circuit that consolidates CPU cores, GPU, video codecs, display controllers, and peripheral interfaces on a single silicon die. Within the broader taxonomy, the RK3168 belongs to the application processor family, sitting between a microcontroller (no display/multimedia capability) and a full multimedia SoC. The Cortex-A9 microarchitecture places the RK3168 in the mid-2010s generation of ARMv7 application processors, which succeeded the Cortex-A8 and was later overtaken by Cortex-A53/A55 designs. Key features include dual-core 1.2 GHz Cortex-A9 with out-of-order execution, PowerVR SGX540 graphics, integrated HDMI/LVDS display controllers, USB 2.0 OTG, MIPI CSI camera interface, multiple SDIO/EMAC/SD card controllers, and a hardware crypto block. The SoC is fabbed on a low-power process with typical smartphone power dissipation below 1 W, enabling fanless designs in tablets and set-top boxes. Architecturally, the RK3168 uses a dual-core Cortex-A9 with NEON SIMD for media acceleration and a separate VPU (Video Processing Unit) that offloads 1080p decode from the CPU. This hardware partitioning delivers the multimedia performance of higher-priced application processors while maintaining the power profile of mobile devices. The SGX540 GPU provides OpenGL ES 2.0 and OpenVG 1.1 support suitable for 3D UI and casual gaming. Typical applications include Android smartphones and tablets in the 7-10 inch class, Miracast/dongle wireless display adapters, low-cost media players and set-top boxes, in-vehicle infotainment (IVI) systems, and industrial HMI panels. The Miracast reference design (RK3168 + Wi-Fi companion chip) became a $10 retail adapter form factor in 2013. When designing with this part, ensure the PCB stack-up meets the BGA escape routing requirements and provide adequate thermal relief on the package substrate. Designers should pair the RK3168 with LPDDR2 or DDR3 memory validated by Rockchip's hardware reference manual to avoid boot issues. This page synthesizes distributor pricing, datasheet details, and Rockchip family alternatives not available on a single manufacturer datasheet, helping procurement engineers and engineering teams source the part with confidence.

RFQ संपर्क
RK3288 - Quad-Core Cortex-A17 SoC | Rockchip | BGA-636
RK3288

RK3288 - Quad-Core Cortex-A17 SoC | Rockchip | BGA-636

The Rockchip RK3288 is a low-power, high-performance 32-bit quad-core application processor built around four ARM Cortex-A17 cores with a separately clocked NEON SIMD coprocessor and an ARM Mali-T764 GPU, packaged in a 636-ball BGA. It is designed for mobile phones, personal mobile internet devices (PMID), and other digital multimedia applications, integrating CPU, GPU, multimedia, memory controller, and peripheral I/O into a single SoC. A quad-core application processor (AP) is a system-on-chip that integrates multiple CPU cores, a graphics processor, memory interfaces, display controllers, and standard peripherals (USB, SDIO, I2C, SPI, UART, Ethernet, HDMI, LVDS, MIPI) on a single die. In a system architecture, the AP sits between power management ICs (PMICs), DRAM (LPDDR2/LPDDR3/DDR3), and the display/camera subsystems. The RK3288 belongs to a broader family of Rockchip ARM APs and is part of the Cortex-A17 generation that targeted Android tablets, set-top boxes, Chromebooks, and digital signage during the mid-2010s. Key features include quad-core ARM Cortex-A17 up to 1.8 GHz, Mali-T764 GPU with OpenGL ES 3.1 support, hardware-accelerated 4K H.264/H.265 video decode, HDMI 2.0 output up to 4K@60Hz, dual-channel 32-bit LPDDR3/DDR3/LPDDR2 interface, MIPI DSI and LVDS display outputs, USB 2.0, SD/MMC, eMMC 5.0 support, and integrated audio codec with SPDIF/I2S. The chip supports Android 5.x/6.x and Linux kernels, making it a versatile multimedia AP for consumer and embedded OEMs. The RK3288 uses a 28 nm HKMG CMOS process, which balances performance with reasonable power consumption. Its quad-core Cortex-A17 out-of-order design delivers significantly higher single-threaded performance than the Cortex-A9 predecessor (RK3188) and enables efficient multitasking. The Mali-T764 GPU supports modern graphics APIs, while the 4K hardware codec block offloads video decode from the CPU cores. Typical applications include Android tablets, Chromebooks, digital signage, smart home control panels, set-top boxes, industrial HMI terminals, and embedded kiosks. Designers choose the RK3288 when they need a mature quad-core Cortex-A17 SoC with strong multimedia capabilities and broad Linux/Android BSP support. When designing with the RK3288, pay attention to PCB layout for the BGA-636 footprint - it requires microvia / HDI PCB technology for reliable BGA escape routing. Thermal management is critical because the SoC can dissipate 2 to 5 W under full CPU+GPU+4K decode load. Use a multi-layer PCB with a continuous ground plane under the BGA and provide adequate copper thermal relief around the package. Validate the PMIC compatibility (e.g., RK808 or ACT8846 family) and DRAM timing margins before committing to volume production. This page synthesizes distributor pricing, drop-in same-package Rockchip SoC variants, application pairings, and practical PCB/system design notes not typically consolidated in the manufacturer datasheet.

RFQ संपर्क
RK3368 - Octa-Core 64-bit ARM Cortex-A53 SoC | Rockchip
RK3368

RK3368 - Octa-Core 64-bit ARM Cortex-A53 SoC | Rockchip

The Rockchip RK3368 is a low-power, high-performance 64-bit application processor integrating an octa-core ARM Cortex-A53 CPU cluster with separately clocked NEON coprocessors and an ARM Mali-T720MP2 GPU, targeted at smart TV boxes, OTT streaming devices, set-top boxes, and personal mobile internet devices. The part is manufactured in a 28 nm HPC process, supports up to 1.5 GHz core frequency, integrates 4K H.265/H.264 hardware decoding, HDMI 2.0 output up to 4K@60 Hz, and dual-channel DDR3/DDR3L/LPDDR2/LPDDR3 memory controllers. The RK3368 ships in a 19 mm x 19 mm BGA-453 package (0.8 mm pitch) and is specified for commercial-grade operation at 0 C to +80 C ambient. What is an application processor SoC? An application processor SoC (System-on-Chip) integrates the CPU, GPU, memory controller, video decoder/encoder, display pipeline, and connectivity peripherals onto a single silicon die. In the broader taxonomy: SoC -> application processor -> microprocessor unit (MPU) -> semiconductor. Rockchip positions the RK3368 in its 64-bit octa-core family below the RK3399 (big.LITTLE A72+A53) and above the entry-level RK3328 (quad-core A53). Key features include 64-bit ARMv8 instruction set with full AArch64 execution, hardware H.265 Main Profile decoding up to 4K@60 Hz with H.265 Main10 support, OpenGL ES 3.1 / OpenCL 1.2 capable Mali-T720MP2 GPU running at up to 600 MHz, USB 2.0 host and OTG ports, Gigabit Ethernet MAC, and a flexible VOP (Video Output Processor) supporting HDMI 2.0, eDP, and MIPI-DSI. The integrated Cortex-A53 cores provide 2-3x the performance-per-watt of the previous-generation Cortex-A7 used in the RK3288. The RK3368 architecture uses a single homogeneous octa-core cluster with coherent L2 cache, simplifying software scheduling compared to big.LITTLE designs. The 28 nm process keeps idle power low, while the integrated LPDDR3 controller with 32-bit width and 800 MHz clock provides up to 6.4 GB/s memory bandwidth suitable for 4K video decode. Typical applications include 4K Android TV boxes, OTT streaming sticks, smart signage players, industrial HMI panels, and education tablets. The Cortex-A53's power efficiency also makes the part suitable for fanless enclosures. Design consideration: the RK3368 requires careful 4-layer or 6-layer PCB stack-up with matched-length DDR3 traces and a robust PMIC (RK806 or compatible). LPDDR3 routing demands 100 ohm differential impedance; deviations will cause read/write errors at high temperatures. This page synthesizes distributor pricing, drop-in Rockchip alternatives (same BGA-453 family where applicable), and design notes not consolidated in the public RK3368 datasheet.

RFQ संपर्क
RV1109 - Dual Cortex-A7 AI Vision SoC | Rockchip
RV1109

RV1109 - Dual Cortex-A7 AI Vision SoC | Rockchip

The Rockchip RV1109 is a high-performance AI vision processor System-on-Chip (SoC) tailored for IP cameras (IPC) and machine-vision applications, integrating a dual-core ARM Cortex-A7 32-bit CPU with NEON and FPU, a hardware-based 5-megapixel ISP, and an embedded H.265/H.264 video encoder in a 409-ball FCCSP (14x14 mm) package. Headline parameters include 5M30FPS encoding capability, typical power consumption of approximately 1.2 W at 5M@30fps, and support for multi-stream encoding up to one 5M@30FPS plus one 720P@30FPS simultaneous stream. The part is offered across commercial and industrial temperature grades (-40C to +85C industrial variants documented). An SoC (System-on-Chip) is a single silicon device that integrates a CPU, memory subsystem, specialized accelerators, and I/O peripherals, replacing what would otherwise require a discrete processor plus companion logic. Within the broader taxonomy, the RV1109 sits inside application-specific vision SoCs (a sub-class of microprocessors/MPUs) and below general-purpose SoCs in the processing hierarchy. For AI vision workloads, Rockchip co-integrates a neural-network accelerator alongside the ISP so that inference runs without consuming the A7 cores. Key features distinguishing the RV1109 include a hardware ISP supporting HDR, 3A (AE/AF/AWB), lens shading correction (LSC), 3DNR, 2DNR, sharpening, dehaze, fisheye correction, gamma correction, and feature-point detection. The integrated encoder supports H.265/H.264 at 5 megapixels, with multi-stream capability to feed both local storage and cloud simultaneously. Operating junction temperature supports commercial/industrial deployment, and the FCCSP-409 (14x14 mm) package balances I/O density with PCB manufacturability. Architecturally the RV1109 combines Cortex-A7 application cores for control flow, Linux/SDK management and user I/O with dedicated hardware pipelines (ISP, encoder, NPU) that offload pixel-rate and inference tasks. This heterogeneous architecture keeps the application CPU free for OS-level tasks while real-time image processing runs on deterministic hardware. Typical applications include IP cameras, consumer CCTV, AI dashcams, smart doorbells, biometrics terminals, machine-vision edge devices, and dual-lens AI camera modules. In each case the integrated NPU plus ISP allows on-device analytics such as face recognition or object detection without an external AI accelerator. The RV1126 shares the same FCCSP-409 pinout for higher-resolution variants in the same family. When designing with the RV1109, ensure the carrier PCB provides the published power-rail sequencing and an exposed thermal copper pour under the BGA; the 1.2 W typical dissipation at 5M30fps remains within the package's thermal envelope but rises quickly under sustained NPU load. This page synthesizes distributor pricing, drop-in family alternatives (notably the RV1126 and RV1126B), and design considerations compiled from the Rockchip datasheet and community hardware design references.

RFQ संपर्क
RV1126 - Vision Processor SoC, 4x Cortex-A7, 2 TOPS NPU | Rockchip
RV1126

RV1126 - Vision Processor SoC, 4x Cortex-A7, 2 TOPS NPU | Rockchip

The Rockchip RV1126 is a high-performance vision processor SoC designed for IPC/CVR (IP camera / car video recorder) and edge AI vision applications, integrating quad-core ARM Cortex-A7 CPU cores (up to 1.5 GHz) with NEON and FPU plus an independent RISC-V MCU. The device integrates a 2 TOPS NPU for on-device AI inference, an H.264/H.265 video codec supporting 4K H.264/H.265 decode at 30 fps, a high-quality ISP, and a rich set of peripherals including I2C, SPI, PWM, and USB. Per the Rockchip brief datasheet, typical power consumption at 4K30 fps is about 1.8 W, making the part attractive for thermally constrained edge enclosures. A vision processor SoC is a class of system-on-chip optimized to ingest high-throughput camera data, perform image signal processing (ISP), optionally run neural-network inference on each frame, and encode/decode video with hardware acceleration. Unlike a general-purpose application processor, a vision SoC typically integrates the ISP, vision DSP, video codec, and AI accelerator alongside the application CPU, reducing bill-of-materials and power versus a discrete multi-chip design. The RV1126 sits in the taxonomy "vision processor SoC -> AI vision SoC -> edge AI SoC -> multimedia SoC -> semiconductor", sharing that niche with Rockchip's own RV1109 and competing parts from Novatek, HiSilicon, and Ambarella. Key features include the 4x Cortex-A7 application cluster up to 1.5 GHz, a hardware 2 TOPS INT8 NPU, integrated ISP for high-dynamic-range image pipelines, hardware H.264/H.265 4Kp30 decode, and a Pin-to-Pin compatible footprint with the dual-core RV1109 within the same SoC family. The FCCSP-409 (14 x 14 mm) package supports low-cost four-layer PCB designs with on-package DDR3L. Operating temperature range spans -40 C to +125 C (per JLCPCB listing) for automotive and industrial outdoor deployments. Typical applications include AI IP cameras, automotive dashcams, smart doorbells with on-device AI, video door phones, body-worn cameras, and machine-vision endpoints where 4K video decode, edge inference, and low power must coexist. When designing with this device, prioritize thermal management for the 1.8 W typical load and verify DDR3L PCB layout against the Rockchip hardware design guide to maintain signal integrity at 4K video data rates.

RFQ संपर्क
S32K146 - 112MHz Cortex-M4F 1MB Flash MCU | NXP | Automotive
S32K146

S32K146 - 112MHz Cortex-M4F 1MB Flash MCU | NXP | Automotive

The NXP S32K146 is a 32-bit Arm Cortex-M4F based microcontroller from the S32K1xx family, operating at up to 112 MHz with 1 MB of flash memory, CAN FD, FlexIO, and CSEc hardware security, targeted at general-purpose automotive and high-reliability industrial applications. What is an automotive MCU? An automotive microcontroller is a specialized IC that manages electronic control units (ECUs) in vehicles, handling engine control, body electronics, and gateway communication. Automotive MCUs must meet stringent reliability, temperature, and safety requirements, typically certified to standards like AEC-Q100. Within the embedded processor hierarchy, the S32K146 sits as a general-purpose MCU for automotive body and gateway applications. Key features include a 112 MHz Arm Cortex-M4F core with single-precision floating-point unit (FPU), 1 MB of program flash, 128 KB of SRAM, multiple FlexCAN modules supporting CAN FD, FlexIO for flexible serial protocol emulation, and CSEc hardware security for secure key storage and cryptographic operations. The device supports low-power modes for energy-efficient operation. Technically, the S32K146 is built on a 40nm process balancing performance and power efficiency. It includes a memory protection unit (MPU) and error-correcting code (ECC) on both flash and SRAM for enhanced reliability. The MCU operates from a 2.7V to 5.5V supply and from -40C to +125C ambient, suitable for under-hood automotive environments. Available packages include LQFP-64, LQFP-100, and LQFP-144, enabling scalability within the S32K1xx family. Typical applications include automotive body control modules, gateway modules, industrial automation controllers, and HVAC/blower control. CAN FD support enables high-speed in-vehicle networking with payloads up to 64 bytes, while FlexIO emulates UART, SPI, I2C, and other serial protocols without CPU overhead. When designing with the S32K146, use the S32K1xx reference manual for register details and the S32 Design Studio IDE for development. Ensure proper decoupling and power supply sequencing; note that S32K146 consumes approximately 10% more power than the S32K144 in both run and low-power modes, affecting thermal design.

RFQ संपर्क
S32K344 - 160MHz Arm Cortex-M7 MCU | NXP | Automotive
S32K344

S32K344 - 160MHz Arm Cortex-M7 MCU | NXP | Automotive

The NXP S32K344 is a 32-bit Arm Cortex-M7 based microcontroller from the S32K3 family, designed for automotive and industrial applications requiring functional safety and security. It operates over a voltage range of 2.97 V to 5.5 V and an ambient temperature range of -40 °C to 125 °C for all power modes. The device features a single Arm Cortex-M7 core running at up to 160 MHz (with a maximum frequency of 320 MHz in some variants), delivering 2.14 DMIPS/MHz. It is available in a 172-pin High-Density Quad Flat Package (HDQFP) and a 257-ball BGA package, with 4 MB of flash memory and 512 kB of RAM. An Arm Cortex-M7 is a high-performance 32-bit processor core based on the Armv7-M architecture, featuring a 6-stage pipeline, branch prediction, and a floating-point unit (FPU). It is widely used in microcontrollers for applications requiring significant processing power, such as real-time control, digital signal processing, and machine learning at the edge. The S32K344 integrates this core with a rich set of peripherals, including CAN FD, Ethernet, QSPI, and a Hardware Security Engine (HSE), making it suitable for automotive body electronics, gateway modules, and industrial control systems. Key features of the S32K344 include dual-core lockstep configuration for ASIL-D functional safety, a Hardware Security Engine (HSE) for secure boot and key management, and support for firmware over-the-air (FOTA) updates. The device also offers a comprehensive set of communication interfaces, including Ethernet, CAN FD, LIN, SPI, I2C, and UART, along with advanced analog and timer peripherals. The S32K344 is designed to meet ISO 26262 functional safety requirements, with safety mechanisms such as ECC on memories, clock and voltage monitoring, and a lockstep core option. The S32K344 is built on NXP advanced process technology, offering low power consumption and high reliability. It includes a memory protection unit (MPU), a DMA controller for efficient data transfer, and a flexible clocking scheme with internal and external oscillators, plus multiple low-power modes for battery-powered designs. Typical applications for the S32K344 include automotive body control modules, gateway modules, battery management systems, and industrial automation controllers. Its combination of performance, safety, and security makes it ideal for applications requiring real-time control and secure communication. The S32K344 is supported by NXP S32 Design Studio IDE, AUTOSAR-compliant drivers, and a comprehensive SDK. When designing with the S32K344, place 100 nF decoupling capacitors close to each power pin and a bulk capacitor on the main supply. For functional safety applications, enable the lockstep mode and configure safety mechanisms per ISO 26262 guidelines.

RFQ संपर्क
S3F8S7BXZZ-TW8B - 8-bit MCU, 64KB Flash, 80-TQFP | Zilog
S3F8S7BXZZ-TW8B

S3F8S7BXZZ-TW8B - 8-bit MCU, 64KB Flash, 80-TQFP | Zilog

The Zilog S3F8S7BXZZ-TW8B is an 8-bit SAM88RC microcontroller from the S3F8S family, packaged in an 80-pin TQFP, featuring a Z8-compatible CPU core, 64 KB of on-chip Flash program memory, and an extensive set of integrated peripherals for embedded control applications. Key features of the S3F8S7B family include a Z8-compatible CPU that delivers a fast and efficient register-oriented architecture, 64 KB of Flash memory for program storage, RAM for data operations, and a sophisticated interrupt controller that supports fast context switching. The integrated peripherals typically include multiple timers/counters, a UART, an A/D converter, GPIO, and PWM channels, allowing the device to consolidate many discrete analog and digital functions onto a single chip and reduce overall BOM cost. Typical applications for this MCU include home appliance control (washing machines, microwave ovens, induction cookers), industrial motor control, HVAC control panels, security alarm panels, remote controllers, and consumer electronics that require a small, low-cost 8-bit controller with ample Flash for feature-rich firmware. The 80-pin TQFP package provides sufficient I/O for multi-segment LCD driving or keypad scanning without external I/O expanders. The SAM88RC architecture is a well-known 8-bit core in the legacy embedded market, and Zilog continues to support this family with stable toolchains and a stable long-term supply. The combination of 64 KB Flash and the Z8-compatible ISA makes this MCU a familiar migration target for engineers replacing obsolete 80C51 or other legacy 8-bit designs.

RFQ संपर्क
S5LS10106ASPGEQQ1 - Hercules TMS570 Cortex-R4F MCU 1MB Flash 144LQFP | TI
S5LS10106ASPGEQQ1

S5LS10106ASPGEQQ1 - Hercules TMS570 Cortex-R4F MCU 1MB Flash 144LQFP | TI

The Texas Instruments S5LS10106ASPGEQQ1 is a 16/32-bit ARM Cortex-R4F Flash microcontroller from TI's Hercules TMS570 family, housed in a 144-pin LQFP (20x20 mm) package qualified to AEC-Q100 for automotive safety applications. It integrates 1 MB of Flash program memory (organized as 1M x 8), 128 KB of on-chip SRAM, and runs at a maximum CPU clock of 140 MHz. The device operates from a dual 1.5 V core / 3.3 V I/O supply rail and offers 68 general-purpose I/O pins, three MibSPI controllers (each with four chip selects), two SCI / UART channels, two CAN controllers, and a 12-bit ADC. A microcontroller (MCU) is a single-chip programmable computer that integrates a CPU core, memory (Flash for program storage, SRAM for working data), and a rich set of on-chip peripherals (timers, ADC, communication controllers). Cortex-R4F is ARM's real-time, fault-tolerant core architecture, aimed at safety-critical systems. The Hercules TMS570 line wraps the Cortex-R4F with ECC-protected Flash, parity/ECC on SRAM, dual Cortex-R4F lockstep (on certain siblings), a built-in Memory Protection Unit, and a windowed watchdog, positioning it as a safety MCU within the broader power management / domain controller hierarchy in modern vehicles. Key features include 1 MB ECC Flash, 128 KB ECC SRAM, lockstep-friendly Cortex-R4F core, hardware CRC, 32-bit timers, an external-clock ECLK output, and a wide operating temperature range of -40C to +125C that satisfies automotive under-the-hood requirements. Three MibSPI ports with up to four chip selects each accelerate communication with external sensors and power-converter peripherals, while two CAN controllers support legacy automotive network integration. Typical applications include automotive brake systems (ABS/ESC), electric power steering (EPS), airbag ECU, battery management systems (BMS), body and chassis ECUs, industrial safety PLCs, and railway signaling controllers. The 144-LQFP package exposes enough I/O for multi-channel sensor aggregation and redundant actuator drive. Design consideration: AEC-Q100 qualification means this part has been characterized across automotive temperature profiles; designers should still apply the same PCB layout hygiene as for any high-speed MCU - decoupling within 1-2 mm of each supply pin, a solid ground plane under the 144-LQFP paddle and short traces to the high-speed oscillator. While the S5LS10106AS variant is a feature node, the S5LS20206AS sibling in the same family doubles flash/RAM. This page synthesizes Hercules TMS570 family positioning, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ संपर्क
S908GR32AH0CFAER - 8-Bit 8MHz 32KB MCU | NXP
S908GR32AH0CFAER

S908GR32AH0CFAER - 8-Bit 8MHz 32KB MCU | NXP

The NXP Semiconductors S908GR32AH0CFAER is an 8-bit HC08/S08 microcontroller operating at 8 MHz, with 32 KB of flash memory and a 48-LQFP 7 x 7 mm package. It is identified by distributor listings as an automotive-qualified general-purpose device with consumer and industrial positioning. A microcontroller is a programmable semiconductor that integrates a CPU core, nonvolatile program memory, data memory, and peripherals into one device. The HC08/S08 architecture provides a compact control platform for embedded products, where a controller must read inputs, execute firmware, control outputs, and manage system timing without a separate processor. In the power hierarchy, this device is a microcontroller IC, not a voltage regulator or power-management component. The supplied distributor data identifies the core as HC08, the word length as 8 bits, the maximum clock as 8 MHz, and flash storage as 32 KB organized as 32K x 8. The device also carries automotive qualification language in a distributor datasheet listing. Its 48-LQFP package provides a higher pin count than common small-outline packages and is suitable for systems requiring multiple external connections. The S908GR32AH0CFAER is positioned for general-purpose embedded control, automotive-oriented electronics, consumer equipment, and industrial products. Typical designs would use it for sensor acquisition, actuator control, keyboard or interface management, and low-to-medium-complexity automation. The exact peripheral set, RAM capacity, pin functions, electrical limits, and programming details require confirmation from the manufacturer datasheet before final hardware design. The principal design consideration is to verify the complete 48-pin pinout, power requirements, clocking, and peripheral multiplexing against the official documentation. Because the provided search results identify a 48-LQFP package, PCB layout and assembly must match the exact land pattern and pin numbering. Firmware should also be checked against the intended HC08/S08 toolchain and memory map. This page combines verified distributor specifications, package and application context, sourcing links, and explicit data gaps. It does not infer unreported RAM, GPIO, timer, communication, or electrical specifications. Confirm manufacturer documentation, lifecycle status, and qualification details before committing a production design.

RFQ संपर्क
S908GR8E0CDWE - 8-bit HC08 MCU, 8KB Flash, 8MHz | NXP / Freescale
S908GR8E0CDWE

S908GR8E0CDWE - 8-bit HC08 MCU, 8KB Flash, 8MHz | NXP / Freescale

The NXP (formerly Freescale) S908GR8E0CDWE is an 8-bit HC08 microcontroller with 7.5 KB of Flash program memory and an 8 MHz CPU core, housed in a 28-pin SOIC package and qualified to operate from -40 °C to +85 °C for automotive-grade applications. It is a member of the low-cost, high-performance M68HC08 Family of 8-bit microcontroller units (MCUs), originally derived from the legacy MC68HC08G line. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash/RAM), and peripherals on one silicon die. Within that hierarchy, this part is a Flash-based HC08 core MCU. The HC08 is a CISC-style 8-bit architecture from the M68HC08 family, widely used in simple control loops, automotive body electronics and low-cost consumer devices where deterministic interrupt response and ease of programming matter more than raw MIPS. HC08 sits in the broader taxonomy of microcontrollers -> microprocessors -> semiconductors. Key features include 7.5 KB of on-chip Flash (8 KB less the option-trim region used by some HC08 derivatives), an internal 8 MHz bus clock source, an automotive operating temperature window of -40 °C to +85 °C, and a 28-pin SOIC plastic package suitable for surface-mount assembly on standard 1.27 mm SOIC footprints. The part supports the standard M68HC08 instruction set and on-chip peripherals such as timers, I/O ports and an SCI. From an architectural standpoint, the part uses a von Neumann bus with the M68HC08 instruction set, BCD arithmetic and bit-manipulation instructions that simplify port I/O. Its on-chip oscillator trims via a background mode and supports user-mode Flash programming. The combination of integrated timers, an analog comparator on similar HC08GR family members and external interrupts makes the device usable as a single-chip solution for small closed-loop control tasks. Typical applications include automotive body controllers, sensor signal conditioning nodes, simple HVAC damper actuators, low-cost industrial timers and home-appliance controllers. In most reference designs the S908GR8E0CDWE is paired with a CAN or LIN transceiver for in-vehicle networking, or with a small EEPROM for non-volatile parameter storage. When designing with this device, ensure the supply rail decoupling uses at least one 100 nF X7R close to the VDD pin plus a 10 µF bulk cap, and respect the 5.5 V absolute maximum on VDD. Program the Flash from a clean VDD ramp to avoid spurious mass-erase events. This page synthesizes distributor pricing, drop-in alternatives and practical design notes not found in the manufacturer datasheet.

RFQ संपर्क
S908QY4E0CDWER - 8-bit HC08/S08 MCU 4KB Flash | NXP
S908QY4E0CDWER

S908QY4E0CDWER - 8-bit HC08/S08 MCU 4KB Flash | NXP

The NXP (formerly Freescale) S908QY4E0CDWER is an 8-bit microcontroller from the HC08/S08 family with 4 KB of Flash program memory, designed for cost-sensitive embedded control applications. Housed in a SOIC-16 wide-body (DW) package with tape-and-reel packaging, this part integrates the S08 CPU core, on-chip debug support, and the standard QY-series peripheral set including timers, ADC, and serial interfaces. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash/RAM), and I/O peripherals. Within the taxonomy, this part sits at: 8-bit MCU -> microcontroller -> embedded controller -> integrated circuit -> semiconductor. The HC08/S08 architecture is one of the longest-lived 8-bit MCU families in the industry, originally developed by Motorola/Freescale (now NXP), known for deterministic behavior, low noise memory, and ultra-low-power modes suited to battery-powered and industrial designs. Key features of the S908QY4E0CDWER include 4 KB of Flash program memory, 128 bytes of RAM, an internal bus clock capable of supporting 8 MHz CPU operation, multiple low-power stop and wait modes, and a 10-channel 10-bit successive-approximation ADC. The wide-body SOIC-16 package provides ease of hand-soldering and is compatible with hobbyist and industrial through-hole-to-SMD adapter workflows. The -E0 mask suffix identifies the specific silicon revision, and the -ER suffix in the data confirms tape-and-reel packaging orientation for high-volume assembly. The S08 core uses a von Neumann-style architecture with a unified address space, simplifying C compiler code output. On-chip peripherals are memory-mapped, and the background debug module (BDM) allows non-intrusive in-circuit programming and debugging using a single-wire interface, which reduces pin count on the target board. The internal oscillator with trim capability eliminates the need for an external crystal in many applications, reducing BOM cost. Typical applications include appliance control boards, automotive body electronics (non-safety), battery-powered sensor nodes, consumer white goods, simple motor control via PWM, and industrial control modules. The wide SOIC-16 package is often selected for prototyping and educational platforms because it is easy to handle and breadboard-compatible with SOIC-to-DIP adapters. When designing with the S908QY4E0CDWER, ensure decoupling capacitors (typically 100 nF) are placed as close as possible to the VDD/VSS pin pairs. For applications requiring deterministic interrupt latency, configure the IRQ vector table to place high-priority ISRs at low vector addresses. If using the internal clock source, calibrate the ICG (internal clock generator) trim value to compensate for temperature drift. This page synthesizes distributor stock data, parametric comparison with HC08/S08 family members, and practical design guidance drawn from NXP application notes that is not consolidated in the standalone manufacturer datasheet.

RFQ संपर्क
S912XD128F2MAL - 16-bit HCS12X MCU, 128KB Flash | NXP
S912XD128F2MAL

S912XD128F2MAL - 16-bit HCS12X MCU, 128KB Flash | NXP

The NXP S912XD128F2MAL is a 16-bit automotive microcontroller built on the HCS12X CPU core, integrating 128 KB of Flash and operating up to 80 MHz in a 112-pin LQFP package. It is designed for automotive body and chassis applications requiring deterministic real-time control and CAN connectivity, qualified over -40 °C to +125 °C. The HCS12X core is upward-compatible with the legacy HCS12 instruction set, supporting advanced indexed addressing, an enhanced instruction queue, and an interrupt model identical to HCS12, enabling easy migration of existing S12 firmware. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, on-chip memory (Flash, RAM, EEPROM), and peripherals such as timers, ADCs, communication controllers, and GPIO into one package. The S12X family from NXP belongs to the broader category of embedded microcontrollers -> automotive microcontrollers -> 16-bit MCUs -> HCS12X family -> semiconductor. Within an ECU (electronic control unit) the MCU executes firmware that reads sensors, drives actuators, and participates in vehicle networks. Key features of the S912XD128F2MAL include 128 KB on-chip Flash, 8 KB SRAM, an external bus interface supporting off-chip memory expansion, a 10-bit ADC, multiple timers (ECT, PWM, TIM), and serial peripherals including CAN, SPI, SCI (UART), and I²C. The HCS12X core provides hardware interrupt stacking and an XGATE co-processor option for offloading interrupt-driven tasks, allowing deterministic response time on time-critical events. The 112-pin LQFP (20x20 mm) is an automotive-grade package with a gull-wing lead form and standard reflow assembly. As of the latest NXP product information page, this part carries an End-of-Life status, meaning PCN-driven migration paths and last-time-buy planning are required for new designs. Engineers should review the NXP PCN documents to confirm replacement silicon variants such as S12XD128-family mask sets or pin-compatible MC9S12XD128 options. Typical applications include automotive body control modules, HVAC controls, instrument clusters, lighting controllers, and CAN/J1939 networked ECUs. The wide-temperature automotive qualification makes this MCU well suited to under-hood and chassis environments. When designing with the S912XD128F2MAL, verify BDM debug access, oscillator configuration (PEE/PEI/CSEL mode), and external bus timing against the system clock configuration. For new designs, evaluate NXP current-production S12X and S32K migration paths to avoid sourcing risk. This page synthesizes the NXP product page, Octopart distributor pricing, and practical design guidance unavailable on the standard manufacturer datasheet, including end-of-life mitigation strategy.

RFQ संपर्क
S912XD128F2MAL-FR - 80MHz 16-Bit 128KB Flash MCU | NXP
S912XD128F2MAL-FR

S912XD128F2MAL-FR - 80MHz 16-Bit 128KB Flash MCU | NXP

The NXP Semiconductors S912XD128F2MAL-FR is an automotive-qualified 16-bit S12X microcontroller operating at 80 MHz, with 128 KB of Flash memory, in a 112-pin LQFP package. It supports the S12X core architecture and is associated with a -40°C to +125°C operating-temperature range. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and interface circuitry on one device. The S12X family belongs to the embedded-processor hierarchy and is designed for automotive and industrial control systems requiring deterministic embedded control, communication peripherals, and external signal connectivity. The device combines 16-bit processing with 128 KB of Flash and a 112-pin surface-mount package. The verified source data identifies the device as an S12X-core MCU with 80 MHz operation, 128 KB Flash, an automotive qualification, and QFP-112 packaging. The -40°C to +125°C range supports harsh-temperature automotive environments, subject to the complete manufacturer datasheet and device qualification details. The large 112-pin package provides numerous external connections compared with smaller microcontroller packages, which can simplify access to peripheral signals but requires careful PCB layout. The S912XD128F2MAL-FR is positioned for embedded automotive controllers, body and chassis electronics, sensor aggregation, actuator control, and other real-time control applications. Its 16-bit architecture and 80 MHz operating point are useful for interrupt-driven control loops and communication-intensive embedded tasks. The 128 KB Flash allocation provides storage for application code, while the remaining RAM, peripheral set, and electrical limits require confirmation from the official datasheet. Because the manufacturer page identifies this part as End of Life, new production designs should confirm lifecycle status, sourcing availability, and any approved migration path with NXP before committing to a design. For an existing PCB, replacement qualification must verify package dimensions, pinout, supply voltage, clock requirements, memory organization, peripheral compatibility, and software migration requirements. This page consolidates the verified manufacturer identity, package information, lifecycle indication, technical search terms, and sourcing context for S912XD128F2MAL-FR. It is intended to support engineering selection and RFQ planning, while clearly separating verified facts from parameters that still require datasheet confirmation.

RFQ संपर्क
S912XD128F2VAL - 16-bit S12X MCU, 128KB Flash, 80MHz, LQFP-112
S912XD128F2VAL

S912XD128F2VAL - 16-bit S12X MCU, 128KB Flash, 80MHz, LQFP-112

The NXP Semiconductors S912XD128F2VAL is a 16-bit automotive-qualified microcontroller built around the HCS12X CPU core, offering 128 KB of on-chip Flash program memory, 8 KB of Data RAM, and a maximum CPU clock of 80 MHz, all housed in a 112-pin LQFP (LQFP-112) surface-mount package with gull-wing leads. The device operates across an industrial/automotive temperature range of -40 °C to +105 °C and is qualified to the AEC-Q100 automotive standard, making it suitable for under-hood and body-electronics applications where thermal stress and reliability requirements are stringent. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash/ROM), working memory (RAM), and a rich set of programmable peripherals such as timers, ADC, PWM, SCI/SPI/I2C communication blocks, and GPIO into a single chip. MCUs sit at the top of the embedded-control hierarchy: sensor → signal conditioning → MCU → actuator/driver, executing firmware that interprets sensor inputs and drives outputs in real time. Within NXP's portfolio, the S12X family extends the classic HCS12 instruction set with an enhanced index-addressing mode, additional instructions, and an instruction queue, while remaining object-code compatible with older HCS12 designs to protect existing firmware investments. Key features of the S912XD128F2VAL include a 16-bit HCS12X core with interrupt stacking that matches the HCS12 programmer's model, an instruction queue for improved throughput, and an enhanced indexed-addressing mode that accelerates table lookups and pointer math. The 112-pin LQFP provides abundant I/O for body-controller, gateway, and chassis sub-system designs, and the automotive-grade qualification supports deployment in passenger-vehicle electronic control units. Architecturally, the S12X core pairs a 16-bit ALU with an instruction pipeline and queue that allows the next opcode to be fetched while the current one is still executing, effectively boosting sustained throughput versus the original HCS12. On-chip peripherals typically include multiple SCI (UART) ports, SPI, I2C, CAN, PWM channels for motor and lighting control, a 10- or 12-bit ADC for sensor reading, and a 16-bit counter/timer block, all clocked from an internal PLL that derives 80 MHz from an external resonator. Typical applications include automotive body controllers, climate/HVAC modules, instrument clusters, lighting controllers, and CAN/LIN gateways; the wide temperature range also suits industrial PLCs and building-automation controllers where a rugged 16-bit MCU is preferred over an 8-bit device. When designing with this part, verify that your firmware budget fits within 128 KB of Flash and that RAM usage stays below 8 KB; if the application grows, consider the pin-compatible S912XD256F2VAL or S912XD512F2VAL with larger memory but identical LQFP-112 footprint. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes that complement - rather than restate - the manufacturer datasheet.

RFQ संपर्क
S912XD256J1MAA - 16-Bit 80MHz 256KB MCU | NXP
S912XD256J1MAA

S912XD256J1MAA - 16-Bit 80MHz 256KB MCU | NXP

The NXP S912XD256J1MAA is a 16-bit HCS12X embedded microcontroller rated at up to 80 MHz, with 256 KB of flash memory organized as 256K x 8 and an 80-lead QFP package measuring 14 x 14 mm. It is positioned for automotive-temperature embedded control applications that require deterministic processing, substantial embedded program storage, and a conventional gull-wing surface-mount footprint. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and interface blocks into one embedded-control component. The S912XD256J1MAA belongs to the HCS12X family and sits within the broader hierarchy of embedded processors and controllers, microcontrollers, and semiconductors. Its 16-bit architecture and 256 KB flash configuration provide a useful balance between code capacity and real-time control capability for automotive electronics. Verified distributor information identifies the device as an HCS12X microcontroller with a 16-bit CPU, 80 MHz maximum listed frequency, 256 KB flash memory, and an 80-QFP 14 x 14 mm package. The J1MAA ordering suffix is associated in distributor data with an automotive temperature grade. Additional electrical details such as supply voltage, RAM, EEPROM, peripheral mix, and temperature limits were not supplied in the verified dataset and therefore require confirmation from the manufacturer documentation before schematic capture. The 80-lead QFP package provides more external connection capacity than a small dual in-line package and supports integration with external memory, communications circuitry, sensors, actuators, and interface transceivers. Compared with a smaller microcontroller package, its 14 x 14 mm footprint offers many more available I/O and bus connections, but it also demands careful escape routing, adequate assembly clearance, and a larger land pattern on the printed circuit board. Typical uses include body, chassis, powertrain-adjacent, motor-control, vehicle-network, sensor-conditioning, and industrial embedded-control platforms where legacy software investment and 16-bit processing are important. The part should be selected only after confirming exact peripheral compatibility, memory map, clock configuration, electrical limits, and software-device identity through the authoritative HCS12X documentation. A practical design constraint is that software migration cannot be judged from clock speed alone. Engineers should verify controller revisions, peripheral modules, interrupt vectors, pin multiplexing, flash wait states, and toolchain support before committing to a redesign. This page combines verified distributor facts, sourcing context, and selection guidance while clearly separating parameters that still require manufacturer-datasheet confirmation.

RFQ संपर्क
S912XD64F2VAA - 80MHz S12X MCU, 64KB Flash | NXP | Automotive
S912XD64F2VAA

S912XD64F2VAA - 80MHz S12X MCU, 64KB Flash | NXP | Automotive

The NXP Semiconductors S912XD64F2VAA is a 16-bit HCS12X automotive-qualified microcontroller operating at up to 80 MHz, with 64 KB of flash program memory and 59 I/O pins in an 80-pin QFP package. Its -40°C to +105°C temperature range and integrated CAN bus, I²C, SCI, SPI, PWM, watchdog, low-voltage detection, and power-on reset peripherals suit demanding automotive and industrial-control systems. A microcontroller is an integrated semiconductor device that executes firmware, reads sensor inputs, controls actuators, and coordinates communication between electronic subsystems. The HCS12X architecture remains upward-compatible with the HCS12 instruction set while adding enhanced indexed addressing, an enhanced instruction set, interrupt stacking, and a programmer's model compatible with HCS12. Within the system hierarchy, this MCU combines real-time control, data processing, and serial communications in one device. The principal verified features are an 80 MHz maximum clock, 64 KB x 8 flash memory, 59 I/O pins, and an 80-pin QFP package. The listed connectivity includes CANbus, I²C, SCI, and SPI, while the peripheral set includes pulse-width modulation, a watchdog timer, low-voltage detection, and power-on reset. These resources reduce the need for external interface devices in body, vehicle, and industrial-control designs. Its 16-bit HCS12X core is designed for embedded control rather than host-class computing. The 64 KB flash budget provides room for application firmware, while 1 KB of EEPROM supports nonvolatile data storage. The MCU's mix of serial interfaces supports sensor networking, actuator control, diagnostics, and communication with external transceivers or modules. Typical uses include automotive body and chassis control, engine-adjacent control systems, industrial automation equipment, CAN-connected controllers, data-acquisition systems, and embedded motor-control platforms. The -40°C to +105°C range is especially relevant where components must operate across extended automotive thermal conditions. Designers should verify clock, memory, peripheral, reset, and pin assignments against the manufacturer datasheet before schematic capture. QFP-80 assembly also requires adequate PCB routing space, pin-1 identification, solderability planning, and thermal-conduction design. Because NXP identifies the part as end of life, long-term availability and legacy-system continuity should be confirmed before new production commitments. This page consolidates the verified manufacturer and distributor findings, distinguishes lifecycle risk from electrical suitability, and provides engineering-oriented selection guidance. It does not infer missing electrical limits or claim an unverified drop-in replacement where the available cross-reference evidence does not establish pin compatibility.

RFQ संपर्क