DS1307ZN+T&R vs DS1307N तुलना

विस्तृत दोनों ओर की तुलना DS1307ZN+T&R द्वारा Analog Devices और DS1307N द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
DS1307ZN+T&R DS1307ZN+T&R - I2C RTC with 56B SRAM | Analog Devices

DS1307ZN+T&R - I2C RTC with 56B SRAM | Analog Devices

DS1307ZN+T&R ✓ सक्रिय
Analog Devices
DS1307N DS1307N+ - 64x8 Serial I2C RTC, 56B NV SRAM, 8-DIP | Maxim

DS1307N+ - 64x8 Serial I2C RTC, 56B NV SRAM, 8-DIP | Maxim

DS1307N ✓ सक्रिय

विशेषता तुलना

पैरामीटर DS1307ZN+T&R DS1307N
ब्रांड Analog Devices Analog Devices
श्रेणी Clock & Timing Clock & Timing
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Serial real-time clock and calendar with NV SRAM —
Clock Calendar Data Format Binary-coded decimal (BCD) —
Serial Interface I2C, bidirectional 2-wire serial —
NV SRAM Capacity 56 bytes —
Calendar Resolution Seconds through year —
Maximum Supply Voltage 5.5 V —
पैकेज 8-pin SOIC, 0.154 inch body width, 3.90 mm width 8-DIP (PDIP-8, 0.300 inch / 7.62 mm)
माउंटिंग प्रकार Surface mount Through-Hole
Shipping Format Tape and reel —
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] —
Supply Voltage Range [DATA_NEEDED: minimum and maximum operating supply voltage range] —
Timekeeping Accuracy [DATA_NEEDED: clock accuracy] —
Backup Battery Current [DATA_NEEDED: backup battery current] —
Active Current [DATA_NEEDED: active supply current] —
I2C Address [DATA_NEEDED: I2C slave address] —
Oscillator Type [DATA_NEEDED: oscillator and crystal configuration] —
RoHS स्थिति [DATA_NEEDED: RoHS status] [DATA_NEEDED: lead-free/RoHS exact status]
REACH Status [DATA_NEEDED: REACH status] —
फ़ंक्शन — Real-Time Clock (RTC) with 56 bytes NV SRAM
Time Format — HH:MM:SS (12/24 hr), YY-MM-DD-dd, BCD
Date Format — YY-MM-DD-dd
मेमोरी आकार — 64 x 8 (56 bytes user NV SRAM + 8 bytes RTC registers)
इंटरफ़ेस — I2C, 2-Wire Serial
I2C Bus Frequency — 100 kHz (Standard) / 400 kHz (Fast-mode)
Supply Voltage (VCC) — 4.5 V to 5.5 V
Backup Battery Voltage (VBAT) — 2.0 V to 3.5 V (typ. 3 V coin cell)
Active Supply Current — 1.5 mA
Standby (Timekeeping) Current — 200 uA
Leap-Year Compensation — Valid up to year 2100
Programmable Square-Wave Output — 1 Hz, 4.096 kHz, 8.192 kHz, 32.768 kHz
ऑपरेटिंग तापमान — 0C to +70C (commercial)
MSL स्तर — 1 (unlimited floor life)

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध