Produk (22.000+)

ATTINY824-XF - 20MHz 8KB AVR Microcontroller | Microchip
ATTINY824-XF

ATTINY824-XF - 20MHz 8KB AVR Microcontroller | Microchip

The Microchip Technology ATTINY824-XF is an 8-bit tinyAVR 2 series microcontroller with an AVR CPU and hardware multiplier, operating at up to 20 MHz. It provides 8 KB of in-system programmable Flash, 1 KB of SRAM, and 128 bytes of EEPROM in a 14-pin TSSOP package rated for industrial temperatures up to 125°C. A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripheral functions into one device. The ATTINY824-XF belongs to the tinyAVR 2 hierarchy, combining a compact 8-bit AVR core with Core Independent Peripherals. This family is intended for cost-sensitive embedded control, smart sensors, compact actuator controllers, and connected products that need more processing capability than a basic logic device without the complexity of a larger microcontroller. Key device characteristics include a maximum clock frequency of 20 MHz, a hardware multiplier for faster arithmetic, 8 KB of Flash program memory, 1 KB of internal SRAM, and 128 bytes of nonvolatile EEPROM. The 14-pin TSSOP package provides a practical surface-mount footprint, while the industrial temperature rating supports operation from the lower-temperature industrial range through 125°C. The device is also identified as a Green environmental-compliant part in the product listing. The AVR architecture executes 16-bit and 32-bit instructions from Flash memory organized into 4 KB pages. The hardware multiplier accelerates multiplication operations in control loops, measurement routines, and compact signal-processing tasks. Internal SRAM supports working variables and stack operations, while EEPROM provides nonvolatile storage for calibration values, configuration data, and operating counters without requiring an external memory component. Typical applications include industrial sensor nodes, compact motor and actuator controllers, LED lighting systems, compact power-conversion controllers, appliance interfaces, and embedded IoT nodes. The combination of 20 MHz processing speed and only 14 pins supports designs that need deterministic real-time behavior in a small, inexpensive board area. The primary design consideration is that the 14-pin package limits the available I/O count, so pin multiplexing should be planned before the PCB layout begins. Place decoupling capacitors close to the supply pins and route high-current loads away from sensitive analog inputs. Firmware should also use the manufacturer data sheet for register definitions, clock configuration, peripheral multiplexing, and programming procedures. This page consolidates device specifications, drop-in alternatives, application guidance, and practical PCB considerations into one engineering-focused reference for evaluating the ATTINY824-XF in new embedded designs.

Permintaan RFG Kontak
ATTINY824-XU - 20MHz 8KB Flash AVR MCU | Microchip
ATTINY824-XU

ATTINY824-XU - 20MHz 8KB Flash AVR MCU | Microchip

The Microchip Technology ATTINY824-XU is an 8-bit tinyAVR 2 microcontroller with an AVR CPU, hardware multiplier, up to 20 MHz operating frequency, 8 KB Flash, 1 KB SRAM, and 128 bytes of EEPROM in a 14-pin TSSOP package. It is designed for compact embedded-control designs that require deterministic peripheral handling, low component count, and an integrated AVR development ecosystem. A microcontroller such as the ATTINY824 integrates a processor core, program memory, data memory, and peripherals such as GPIO, timers, serial interfaces, and analog functions into one device. In the system hierarchy, an MCU is a semiconductor and embedded-control IC that sits above simple logic components and below application-specific controllers. The ATTINY824 family is positioned for small control nodes, sensor interfaces, actuator drivers, and compact consumer or industrial products. The ATTINY824 uses the AVR instruction architecture with a hardware multiplier and operates up to 20 MHz. Its 8 KB Flash memory provides program storage, while 1 KB SRAM supports working data and 128 bytes of EEPROM provides nonvolatile storage. The 14-pin TSSOP package is suitable for compact PCB layouts, while the peripheral set supports common embedded designs including UART, I2C, SPI, PWM, timers, and analog signal conditioning. The device is identified in the available product information as an industrial-temperature, green part. The architecture is useful when firmware timing, interrupt responsiveness, and peripheral integration matter more than maximum memory capacity. The AVR CPU executes 16-bit and 32-bit instructions, and the family data sheet describes the Flash organization as pages of 4K x 16 bits. Program development is supported by the AVR tool ecosystem and in-system programming, allowing firmware to be programmed and updated through the device programming interface. Typical applications include low-cost sensor nodes, compact motor and relay controllers, LED and lighting control, UART-connected measurement equipment, and small industrial control modules. The part is particularly suitable when the design requires more integration than a simple logic IC but less memory and processing complexity than a larger microcontroller platform. Designers should preserve the pin assignments shown in the manufacturer datasheet, provide the required decoupling and programming connections, and verify the exact package variant before PCB release. When upgrading or substituting a device, compare memory size, peripheral configuration, timing, temperature grade, and pin compatibility rather than relying only on the device family name. This product page combines the manufacturer identification, distributor technical summaries, package information, application guidance, drop-in comparison candidates, and design considerations to support faster engineering review and sourcing decisions.

Permintaan RFG Kontak
ATTINY826-MF - 20MHz 8-bit AVR MCU | Microchip Technology
ATTINY826-MF

ATTINY826-MF - 20MHz 8-bit AVR MCU | Microchip Technology

The Microchip Technology ATTINY826-MF is an 8-bit AVR tinyAVR 2-series microcontroller with a 20 MHz maximum clock, 8 KB Flash memory, 1 KB SRAM, and 128 bytes of EEPROM in a 20-pin VQFN 3 x 3 mm package. The device combines a hardware-multiplier AVR CPU with compact embedded memory and GPIO resources, making it suitable for cost-sensitive embedded control, sensing, and actuator-management systems. A microcontroller is a programmable semiconductor that integrates a CPU, memory, peripherals, and input/output ports onto one package. It belongs to the hierarchy of embedded processor, microcontroller, 8-bit MCU, and tinyAVR 2 series devices. Compared with a general-purpose processor, the ATTINY826-MF is optimized for standalone control tasks requiring deterministic peripheral access, modest program and data storage, and low board-area consumption. The principal device characteristics are a 20 MHz maximum operating frequency, 8 KB of Flash program memory, 1 KB of SRAM, and 128 bytes of EEPROM. Microchip's ATTINY826 family also uses an AVR CPU with a hardware multiplier. The ATTINY826-MF ordering code specifies the compact 20-pin VQFN 3 x 3 mm package, while the broader ATTINY826 family is also offered in SSOP and SOIC packages. The architecture integrates the AVR CPU, embedded Flash, SRAM, EEPROM, general-purpose I/O, and device-specific peripherals in a compact embedded-control platform. The 3 x 3 mm VQFN construction minimizes PCB footprint, but its exposed-pad thermal and layout requirements must be handled correctly. The 20-pin format also supports a higher pin count than smaller MCU packages, providing additional connections for power, ground, programming, reset, and application I/O. Typical uses include compact sensor-hub controllers, building-automation endpoints, motor or relay-control modules, industrial condition-monitoring nodes, and low-cost consumer accessories. The 20 MHz clock provides additional processing margin for interrupt-driven control and protocol handling, while 8 KB Flash accommodates a focused firmware rather than a large operating system or complex graphical application. A critical layout consideration is the VQFN exposed pad. Follow the manufacturer package drawing and land-pattern guidance when assigning the pad, vias, and surrounding copper. Confirm the complete pin table, programming interface, clock options, electrical limits, and decoupling requirements in the ATTINY826 datasheet before releasing a PCB or production firmware. This product page consolidates the exact ATTINY826-MF package, memory, speed, application, and sourcing details into an engineering-focused reference. It also distinguishes confirmed family characteristics from parameters that require direct review of the manufacturer documentation, helping designers shorten component evaluation without weakening PCB or firmware validation.

Permintaan RFG Kontak
ATTINY826-MU - 20MHz AVR MCU, 8KB Flash | Microchip
ATTINY826-MU

ATTINY826-MU - 20MHz AVR MCU, 8KB Flash | Microchip

The Microchip Technology ATTINY826-MU is an 8-bit tinyAVR 2-series microcontroller featuring an AVR CPU with a hardware multiplier, a maximum operating frequency of 20 MHz, and 8 KB of Flash memory in a 20-pin VQFN 3 x 3 mm package. The device also includes 1 KB of SRAM, 128 bytes of EEPROM, and 18 I/O pins. Its operating-voltage range is 1.8 V to 5.5 V, making it suitable for compact, low-power embedded systems. A microcontroller is a programmable semiconductor that integrates a CPU, memory, digital I/O, and peripherals on one device. The ATTINY826 belongs to the tinyAVR family within Microchip's broader 8-bit AVR architecture. The family hierarchy is tinyAVR 2 series microcontroller > 8-bit AVR microcontroller > microcontroller > embedded processor > semiconductor. Its compact package, event-driven peripherals, and hardware multiplier allow an embedded design to execute control logic without a separate processor or complex external interface circuitry. Key features include the 20 MHz AVR CPU, 8 KB of program Flash, 1 KB of SRAM, and 128 bytes of nonvolatile EEPROM. The 12-bit ADC and 18 available I/O pins support typical sensor-reading, actuator-control, and digital-interface applications. Operating from 1.8 V to 5.5 V permits use in low-voltage equipment, while the -40 °C to +85 °C industrial temperature range supports operation across demanding ambient conditions. The tinyAVR 2 architecture combines a hardware multiplier with flexible, low-power event systems. This combination benefits control loops that multiply values, count external events, or respond to peripheral activity without continuous CPU polling. The 128-byte EEPROM provides a small amount of persistent storage for calibration values, configuration data, or operating counters, although it is not intended for high-volume data logging. Typical uses include compact industrial controllers, low-power sensor nodes, LED-control modules, appliance interfaces, and embedded timing or event-counting systems. The 20-pin VQFN footprint can support space-constrained boards, but its 3 x 3 mm dimensions require careful assembly planning and exposed-pad thermal management where applicable. Designers should verify the complete pin assignment, exposed-pad connection, decoupling requirements, and programming configuration in the manufacturer datasheet. The -MU suffix identifies the 20-pin VQFN package, so board layouts and PCB libraries should be matched to that package rather than the SSOP or SOIC versions of the ATtiny826. This product page consolidates the verified electrical characteristics, package information, family-level alternatives, application guidance, and PCB-focused engineering notes. It also identifies the specific technical areas that must be checked in the manufacturer datasheet before schematic release, firmware development, PCB layout, or production procurement.

Permintaan RFG Kontak
ATTINY826-SF - 20MHz 8KB AVR MCU | Microchip Technology
ATTINY826-SF

ATTINY826-SF - 20MHz 8KB AVR MCU | Microchip Technology

The Microchip Technology ATTINY826-SF is an 8-bit AVR tinyAVR 2-series microcontroller operating at up to 20 MHz, with 8 KB of Flash memory, 1 KB of SRAM, and 128 bytes of EEPROM in a 20-pin SOIC package. The device combines a hardware-multiplier AVR CPU with a low-power architecture suited to compact embedded control systems. An 8-bit microcontroller is a semiconductor that executes embedded instructions from nonvolatile program memory while using RAM for working data and EEPROM for values that must survive power loss. The ATTINY826-SF belongs to the tinyAVR 2 family, which extends the AVR architecture with hardware multiplication, event-based timing, and low-power operating modes for embedded-control applications. Key device attributes include a 20 MHz maximum clock frequency, 8 KB of Flash program memory, 1 KB of SRAM, and 128 bytes of EEPROM. Its 20-pin SOIC package is identified by the ATTINY826-SF ordering code, while the related ATTINY826-SFR product uses 20-SOIC packaging notation. The industrial-temperature indication supports designs expected to operate up to 125 degrees Celsius. The AVR core provides an 8-bit RISC architecture with a hardware multiplier, allowing efficient multiplication operations without software emulation. Separate program memory, static working memory, and byte-sized EEPROM give embedded firmware a clear division between code, operating state, and persistent configuration. Low-power behavior is supported by an 8 MHz low-power mode at a minimum supply voltage of 2.7 V, according to the product description for this exact device. Typical uses include compact industrial controllers, sensor-conditioning systems, appliance control modules, low-power instrumentation, and embedded motor or relay interfaces. The combination of 20 MHz processing speed and 1 KB SRAM is particularly useful for small control loops, digital I/O expansion, communication peripherals, and local parameter storage without introducing a larger processor or memory subsystem. PCB design should follow the manufacturer pinout and recommended decoupling guidance in the ATtiny826 documentation. Confirm the exact SOIC-20 land pattern, programming interface, clock configuration, and peripheral assignments before layout release. Production firmware should also include the appropriate brownout, watchdog, and reset settings to improve behavior during supply disturbances. This page combines the exact ATTINY826-SF characteristics with same-package replacement analysis, application guidance, and practical design notes. It also identifies which memory and pinout details require confirmation in the Microchip documentation before production substitution.

Permintaan RFG Kontak
ATTINY826-SU - 20MHz 8KB AVR MCU | Microchip Technology
ATTINY826-SU

ATTINY826-SU - 20MHz 8KB AVR MCU | Microchip Technology

Microchip Technology ATTINY826-SU is an 8-bit AVR tinyAVR 2-series microcontroller operating up to 20 MHz, with 8 KB of Flash memory and a 20-pin SOIC package. It also provides 1 KB of SRAM and 128 bytes of EEPROM, making it suitable for compact embedded-control designs that need deterministic digital I/O, local program storage, and low-power operation. An 8-bit microcontroller is a programmable semiconductor containing a processor core, memory, and integrated peripherals on one device. Within the product hierarchy, the ATTINY826 belongs to the AVR family, the tinyAVR 2 series, and the broader embedded-microcontroller category. Unlike a discrete logic controller, it executes firmware that can implement timers, communication protocols, control sequences, and interface handling without requiring extensive external components. The ATTINY826 uses an AVR CPU with a hardware multiplier and can run at up to 20 MHz. Its 8 KB Flash capacity provides room for application code, while 1 KB of SRAM supports working variables and stack operations. Nonvolatile EEPROM preserves up to 128 bytes of calibration data, configuration values, or counters when the main supply is removed. The listed operating voltage options are 2.5 V, 3.3 V, and 5 V, supporting both low-voltage and conventional embedded-system rails. The -SU ordering code identifies a 20-pin SOIC package rated for industrial temperature operation to 85 °C. This surface-mount package is suitable for automated assembly and compact PCB layouts. The tinyAVR 2 family uses modern low-power design techniques and an Event System, allowing peripherals to communicate through events to reduce CPU intervention. Exact peripheral assignments, clock configurations, and current-consumption figures must be confirmed in the manufacturer datasheet. Typical uses for the ATTINY826-SU include compact industrial controllers, sensor-interface modules, low-power monitoring equipment, actuator-control boards, and small consumer devices. Its combination of 20 MHz processing, 8 KB Flash, and 1 KB SRAM makes it practical for modest control tasks that do not require a high pin count or large application memory. Designers should verify the exact pin multiplex, peripheral allocation, clock limits, and decoupling requirements against the manufacturer datasheet. A 20 MHz operating point requires suitable clock configuration and signal integrity, while production layouts should provide short return paths and stable supply filtering around the device. This page consolidates verified manufacturer and distributor information, pin-compatible family alternatives, pricing references, and practical selection guidance. It is intended to help engineers determine whether the ATTINY826-SU fits a specific embedded-control design before completing PCB and firmware validation.

Permintaan RFG Kontak
ATTINY826-XF - 20MHz 8KB AVR Microcontroller | Microchip
ATTINY826-XF

ATTINY826-XF - 20MHz 8KB AVR Microcontroller | Microchip

The Microchip Technology ATTINY826-XF is an 8-bit tinyAVR 2 microcontroller with a 20 MHz maximum clock frequency, 8 KB of Flash program memory, 1 KB of SRAM, and 128 bytes of EEPROM in a 20-pin SSOP package. It operates from 4.5 V to 5.5 V and supports low-power operation down to 2.7 V at 8 MHz. A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals in one integrated circuit. The tinyAVR 2 family belongs to the AVR microcontroller line, within the broader 8-bit embedded-controller and semiconductor hierarchy. The ATTINY826 adds a hardware multiplier to the AVR CPU and is designed for compact control tasks requiring modest program storage, data memory, and digital interface integration. Key features include an AVR CPU with a hardware multiplier, operation up to 20 MHz, 8192 bytes of Flash, 1024 bytes of SRAM, and 128 bytes of EEPROM. Its 4.5 V to 5.5 V main operating range is appropriate for 5 V embedded systems, while the 2.7 V minimum operating voltage at 8 MHz extends its utility in lower-voltage designs. The 20-pin SSOP package also supports compact, surface-mount PCB construction. The tinyAVR 2 architecture provides a hardware multiplier for efficient multiplication operations and combines deterministic embedded control with integrated on-chip memory. The ATTINY826 family is offered in 20-pin VQFN, SSOP, and SOIC configurations, giving designers several package options for different assembly methods and board-density requirements. The ATTINY826-XF specifically uses the SSOP configuration identified by its ordering code. Typical applications include compact industrial control modules, LED lighting controllers, small sensor-hub nodes, appliance interface boards, fan and pump controllers, and low-cost embedded products. Its 8 KB Flash capacity suits firmware featuring a modest control loop, local state handling, and communication protocol support, while the 1 KB SRAM is sufficient for small working buffers. Designers should verify the complete peripheral mix, pin multiplexing, clock configuration, and programming requirements against the manufacturer datasheet before final schematic capture. Pay particular attention to operating voltage versus clock speed, startup behavior, and decoupling. The same discipline applies when replacing another 20-pin microcontroller because package shape alone does not establish functional compatibility. This product page combines the exact ATTINY826-XF configuration, manufacturer family information, application guidance, a complete technical comparison framework, and practical design notes. It is intended to accelerate component selection, firmware planning, PCB review, and sourcing decisions for compact embedded systems.

Permintaan RFG Kontak
ATTINY826-XU - 20MHz 8KB 8-Bit MCU | Microchip Technology
ATTINY826-XU

ATTINY826-XU - 20MHz 8KB 8-Bit MCU | Microchip Technology

Microchip Technology ATTINY826-XU is an 8-bit AVR tinyAVR 2 microcontroller rated up to 20 MHz, with 8 KB of Flash memory, 1 KB of SRAM, and 128 bytes of EEPROM in a 20-pin SSOP package. It uses an AVR CPU with a hardware multiplier and is designed for compact embedded-control designs that require fast execution, low pin count, and integrated nonvolatile program memory. A microcontroller is a semiconductor device that combines a processor core, memory, and peripherals on one integrated circuit. The tinyAVR 2 family belongs to the broader hierarchy of 8-bit MCU, embedded processor, embedded controller, and semiconductor products. Its combination of program Flash, SRAM, EEPROM, and timer, serial-interface, and GPIO resources allows a compact product to execute firmware without requiring a separate external memory device. The ATTINY826-XU provides 8 KB of Flash organized as 8K by 8 bits and operates at up to 20 MHz. Its 1 KB SRAM supports working variables and stack operations, while 128 bytes of EEPROM provide nonvolatile storage for small configuration or calibration values. The AVR architecture includes a hardware multiplier, reducing the execution burden for multiply operations in embedded control code. Microchip identifies the device as Green, and the listed industrial temperature rating is 85°C. The exact suffix identifies the SSOP package configuration associated with this orderable device. Microchip also offers other ATtiny826 package and ordering configurations, but designers must verify the package drawing, pin numbering, and electrical limits before substituting a different suffix. The ATTINY826 family is available in 20-pin VQFN, SSOP, and SOIC formats, while this particular ordering code is identified in distributor product records as a 20-pin SSOP device. Typical uses include compact sensor controllers, small industrial control modules, appliance interfaces, LED-control systems, and low-cost embedded products. Engineers can use the 20 MHz CPU for responsive control loops and communication handling, while the integrated memories reduce board area. The combination is particularly useful when the product needs deterministic embedded behavior but does not require a high-performance MCU or a large external memory interface. The primary design consideration is package-specific PCB planning. Follow the manufacturer package drawing and pin-description table when assigning traces, programming-header contacts, decoupling, and exposed connections. Check the complete ordering table before production release because package, temperature, programming, and packing options can use different suffix codes. Firmware and application development should be tested with the intended ATTINY826 device and package configuration. This page combines manufacturer specifications, package-selection guidance, practical application fit, and a strict review of drop-in replacements. It distinguishes electrically similar but physically incompatible options, helping engineers make a package-safe decision while using the Request a Quote form for current commercial information.

Permintaan RFG Kontak
ATTINY827-MF - 20MHz 8-bit AVR MCU, 8KB Flash, 24-VQFN | Microchip
ATTINY827-MF

ATTINY827-MF - 20MHz 8-bit AVR MCU, 8KB Flash, 24-VQFN | Microchip

The Microchip Technology ATTINY827-MF is an 8-bit AVR tinyAVR 2 family microcontroller built around the AVR CPU with hardware multiplier, running at up to 20 MHz, and integrating 8 KB of Flash program memory, 1 KB of SRAM and 128 bytes of EEPROM in a 24-pin VQFN (4 x 4 mm) package. A microcontroller is a self-contained computing element that integrates a CPU core, non-volatile program memory, working RAM and dedicated peripherals onto one die. The tinyAVR 2 family, to which the ATTINY827 belongs, extends that hierarchy from general-purpose MCU down to a compact 8-bit AVR core optimized for cost-sensitive embedded control. The ATTINY827 sits at the top of that family in memory density, giving small control boards real code space without moving to a 32-bit core. Key features of the ATTINY827-MF include a hardware multiplier in the CPU core, 8 KB of Flash for program storage, 1 KB of SRAM for data, and 128 bytes of EEPROM for non-volatile parameter retention. The family uses the latest Core Independent Peripherals (CIPs) from Microchip, and the ATtiny827 variant additionally carries the serial and timer resources typically required for connected control nodes. The 24-VQFN land pattern at 4 x 4 mm keeps the footprint smaller than the equivalent 20- and 24-lead SOIC options, saving board area in densely packed appliances and sensor modules. Because the CPU runs the classic AVR instruction set with a hardware multiplier, arithmetic-heavy loops such as PID updates or sensor compensation run without software multiplication routines. The tinyAVR 2 core combines that throughput with a low-power design that suits battery-operated and duty-cycled systems, while the CIP peripherals let functions such as timers, comparators and communication modules be routed to pins without heavily loading the CPU. Typical applications include small motor and pump controllers, LED lighting and signage drivers, battery-powered sensor nodes, appliance user-interface boards, and compact current-measurement or energy-metering sub-systems. In each case the part replaces a discrete logic solution while keeping bill-of-material cost and board area low. A key design consideration is that a 4 x 4 mm VQFN demands careful PCB layout: land patterns are dense, the exposed pad must be soldered and tied to ground for thermal performance, and the package has no lead room for hand rework. Use the pin description table in the Microchip ATtiny424/426/427/824/826/827 data sheet when assigning tracks. This page consolidates manufacturer specifications, package and pin-out guidance, family drop-in alternatives and practical layout notes into one place, adding engineering context that a bare parametric distributor listing does not provide.

Permintaan RFG Kontak
ATTINY827-MU - 20MHz 8KB AVR MCU | Microchip Technology
ATTINY827-MU

ATTINY827-MU - 20MHz 8KB AVR MCU | Microchip Technology

The Microchip Technology ATTINY827-MU is an 8-bit AVR tinyAVR 2-series microcontroller rated for operation up to 20 MHz, with 8 KB of Flash program memory, 1 KB of SRAM, and 128 bytes of EEPROM in a 24-pin VQFN package measuring 4 x 4 mm. The device includes an AVR CPU with a hardware multiplier and supports operating frequencies of 10 MHz at 2.7 V and 5 MHz at 1.8 V, providing design flexibility across common low-voltage supply rails. A microcontroller is a programmable integrated circuit that combines a processor core, nonvolatile program memory, data memory, and peripherals in one compact device. The ATTINY827 belongs to the hierarchy of tinyAVR 2-series microcontrollers, AVR 8-bit microcontrollers, embedded controllers, and integrated circuits. Its compact package makes it suitable for space-constrained control systems, while its hardware multiplier supports efficient multiplication operations in embedded software. The principal memory resources are 8 KB of Flash for firmware, 1 KB of SRAM for working data, and 128 bytes of EEPROM for nonvolatile data retention. Execution up to 20 MHz provides useful processing margin for event-driven control, monitoring, and communication-oriented firmware. The 24-pin VQFN arrangement also supports compact PCB construction in applications where the 4 x 4 mm footprint is valuable. The tinyAVR 2 family uses a flexible, low-power architecture and incorporates Core Independent Peripherals, as identified by the manufacturer product page. These characteristics make the ATTINY827-MU relevant to embedded designs that require deterministic low-power control without the memory and processing demand of a high-end application processor. Firmware designers should select the operating frequency and peripherals required by the target system from the complete family datasheet. Typical uses include compact industrial control modules, environmental monitoring nodes, LED and lighting controllers, consumer-product interfaces, and small embedded subsystems. Its 1 KB SRAM is suitable for modest control loops and protocol buffering, while 8 KB of Flash can hold focused application firmware. Designs requiring substantially larger code images, larger RAM buffers, or more high-speed peripherals should use a higher-density microcontroller. The primary design consideration is supply and layout planning. The MCU is specified for 10 MHz at 2.7 V and 5 MHz at 1.8 V, so the selected clock must remain valid at the worst-case supply voltage. A compact VQFN layout should also use manufacturer-recommended land patterns, adequate decoupling, clean grounding, and careful treatment of exposed-pad thermal requirements. This page consolidates the verified manufacturer and distributor information for ATTINY827-MU with practical selection guidance, application analysis, and transparent data-availability notes. It distinguishes confirmed specifications from unavailable parameters rather than inferring missing pin assignments, prices, or detailed peripheral characteristics.

Permintaan RFG Kontak
ATTINY828-AU - 20MHz AVR MCU, 8KB Flash | Microchip
ATTINY828-AU

ATTINY828-AU - 20MHz AVR MCU, 8KB Flash | Microchip

The Microchip Technology ATTINY828-AU is an 8-bit AVR RISC-based microcontroller with a 20 MHz maximum clock, 8 KB of in-system programmable Flash, 256 bytes of EEPROM, and 512 bytes of internal SRAM, housed in a 32-pin TQFP package measuring 7 mm by 7 mm. The device provides 28 GPIO pins and integrates a 10-bit ADC, USART, TWI, two SPI interfaces, PWM-capable timers, a 32.768 kHz ultra-low-power oscillator, an 8 MHz internal oscillator, and debugWIRE. An 8-bit AVR microcontroller is a compact embedded-control device that combines a processor core, nonvolatile program memory, data memory, and peripherals on one semiconductor die. The AVR enhanced RISC architecture executes most instructions in a single clock cycle, allowing the ATTINY828-AU to approach 1 MIPS per MHz. Within the product hierarchy, it is a general-purpose microcontroller and embedded-processing IC designed for compact control, sensing, communication, and low-power automation systems. The principal benefits of the ATTINY828-AU include 8 KB of reprogrammable Flash for application code, 28 GPIO pins for external interfaces, and dedicated communication peripherals that reduce the need for separate interface chips. Its 10-bit ADC supports analog measurement, while the two SPI interfaces, USART, and TWI support serial communication with sensors, displays, memories, and other embedded controllers. PWM-capable 8-bit and 16-bit timer/counters support timing, waveform generation, and motor-control functions. The controller uses high-density non-volatile memory technology, allowing the Flash program memory to be reprogrammed in-system through a serial interface. Its debugWIRE interface supports on-chip debugging, and the 32.768 kHz ultra-low-power oscillator provides a time base for low-power timing. The internal 8 MHz oscillator has a stated accuracy of plus or minus 2%, while the maximum operating frequency listed for the ATTINY828-AU is 20 MHz. Supported supply options include 1.8 V, 2.5 V, 3.3 V, and 5 V. Typical applications include industrial sensor nodes, compact control panels, motor and actuator controllers, low-power data-acquisition equipment, connected embedded products, and battery-powered monitoring systems. The combination of 28 GPIO pins and multiple serial peripherals makes it suitable for designs that must consolidate several discrete interface functions around one controller. An external precision oscillator can be used when the application requires more accurate timing than the internal 8 MHz source provides. PCB design should preserve access to all programming and debug signals and route sensitive analog inputs away from switching nodes. Power, ground, decoupling, and exposed thermal-pad connections must follow the package recommendations in the manufacturer datasheet. Firmware should also account for the tolerance of the internal oscillator when relying on it for communication timing, sampling intervals, or real-time schedules. This page combines a technical feature overview, application guidance, package information, engineering design notes, and direct comparison criteria for engineers evaluating the ATTINY828-AU. It also distinguishes exact device functions from uncertain procurement or qualification information, helping teams select the appropriate controller for a new embedded design.

Permintaan RFG Kontak
ATTINY828-AUR - 20MHz AVR MCU, 8KB Flash | Microchip (Tape & Reel)
ATTINY828-AUR

ATTINY828-AUR - 20MHz AVR MCU, 8KB Flash | Microchip (Tape & Reel)

The Microchip Technology ATTINY828-AUR is an 8-bit AVR RISC-based microcontroller with a 20 MHz maximum clock, 8 KB of in-system programmable Flash, 256 bytes of EEPROM, and 512 bytes of internal SRAM, housed in a 32-pin TQFP package measuring 7 mm by 7 mm. The device provides 28 GPIO pins and integrates a 10-bit ADC, USART, TWI, two SPI interfaces, PWM-capable timers, a 32.768 kHz ultra-low-power oscillator, an 8 MHz internal oscillator, and debugWIRE. An 8-bit AVR microcontroller is a compact embedded-control device that combines a processor core, nonvolatile program memory, data memory, and peripherals on one semiconductor die. The AVR enhanced RISC architecture executes most instructions in a single clock cycle, allowing the ATTINY828-AUR to approach 1 MIPS per MHz. Within the product hierarchy, it is a general-purpose microcontroller and embedded-processing IC designed for compact control, sensing, communication, and low-power automation systems. The principal benefits of the ATTINY828-AUR include 8 KB of reprogrammable Flash for application code, 28 GPIO pins for external interfaces, and dedicated communication peripherals that reduce the need for separate interface chips. Its 10-bit ADC supports analog measurement, while the two SPI interfaces, USART, and TWI support serial communication with sensors, displays, memories, and other embedded controllers. PWM-capable 8-bit and 16-bit timer/counters support timing, waveform generation, and motor-control functions. The controller uses high-density non-volatile memory technology, allowing the Flash program memory to be reprogrammed in-system through a serial interface. Its debugWIRE interface supports on-chip debugging, and the 32.768 kHz ultra-low-power oscillator provides a time base for low-power timing. The internal 8 MHz oscillator has a stated accuracy of plus or minus 2%, while the maximum operating frequency listed for the ATTINY828-AUR is 20 MHz. Supported supply options include 1.8 V, 2.5 V, 3.3 V, and 5 V. Typical applications include industrial sensor nodes, compact control panels, motor and actuator controllers, low-power data-acquisition equipment, connected embedded products, and battery-powered monitoring systems. The combination of 28 GPIO pins and multiple serial peripherals makes it suitable for designs that must consolidate several discrete interface functions around one controller. An external precision oscillator can be used when the application requires more accurate timing than the internal 8 MHz source provides. PCB design should preserve access to all programming and debug signals and route sensitive analog inputs away from switching nodes. Power, ground, decoupling, and exposed thermal-pad connections must follow the package recommendations in the manufacturer datasheet. Firmware should also account for the tolerance of the internal oscillator when relying on it for communication timing, sampling intervals, or real-time schedules. This page combines a technical feature overview, application guidance, package information, engineering design notes, and direct comparison criteria for engineers evaluating the ATTINY828-AUR. It also distinguishes exact device functions from uncertain procurement or qualification information, helping teams select the appropriate controller for a new embedded design.

Permintaan RFG Kontak
ATTINY828-MU - 8-Bit 20MHz AVR MCU | Microchip Technology
ATTINY828-MU

ATTINY828-MU - 8-Bit 20MHz AVR MCU | Microchip Technology

Microchip Technology ATTINY828-MU is an 8-bit AVR RISC-based microcontroller with picoPower technology, a 20 MHz maximum clock, 8 KB of in-system programmable Flash memory and a 32-pin VQFN package measuring 5 x 5 mm. The device provides 28 GPIO pins, 10-bit ADC channels, USART, TWI, two SPI interfaces, 8-bit and 16-bit timer/counters with PWM, and on-chip debugWIRE support. Its 512-byte internal SRAM and 256-byte ISP EEPROM make it suitable for compact embedded control, sensor conditioning and low-power automation products. An 8-bit AVR microcontroller is a compact embedded-control component that combines a reduced-instruction-set processor core with Flash program memory, data EEPROM, SRAM and integrated peripherals. Within the product hierarchy, ATTINY828-MU is an ATtiny-series microcontroller, part of the broader AVR family and semiconductor category. Its architecture supports efficient instruction execution and broad GPIO availability in a package intended for compact surface-mount designs. Key device features include 8 KB of ISP Flash, 256 bytes of ISP EEPROM, 512 bytes of internal SRAM and execution up to 20 MHz. The peripheral set includes a 10-bit ADC, USART, TWI, two SPI interfaces, an 8-bit timer/counter and a 16-bit timer/counter with PWM. A ±2% accurate 8 MHz internal oscillator supports clock-based control, while a 32.768 kHz ultra-low-power oscillator is available for low-speed timing. The 28 GPIO pins can be used for digital inputs, outputs and peripheral multiplexing, and the manufacturer states that ADC channels are available on all pins. Two SPI interfaces can support external sensors or serial peripherals, while USART and TWI provide additional wired communication paths. debugWIRE enables on-chip debugging, reducing the tooling required for firmware development and field diagnosis. Typical uses include industrial sensor nodes, compact control panels, small motor-control functions, communications modules and low-power embedded products. For a design using an external sensor, the dual SPI capability can reduce serial-bus contention, and the 10-bit ADC can digitize analog inputs. PWM-capable timers support dimming, actuator positioning or proportional control, provided the selected pin multiplexing is compatible with the chosen function. Design consideration: the 32-VQFN footprint requires careful PCB layout, short signal paths and adequate thermal-copper allocation around the exposed pad. Confirm pin multiplexing, ADC input availability, clock requirements and programming connections against the manufacturer documentation before release. Because package drawing, exposed-pad dimensions and detailed electrical limits are not included in the supplied verified text, those implementation details require confirmation from the official datasheet.

Permintaan RFG Kontak
ATTINY828R-AU - 20MHz 8-Bit AVR MCU | Microchip Technology
ATTINY828R-AU

ATTINY828R-AU - 20MHz 8-Bit AVR MCU | Microchip Technology

Microchip Technology ATTINY828R-AU is an 8-bit AVR RISC microcontroller operating at up to 20 MHz, with 8 KB of in-system programmable Flash, 256 bytes of ISP EEPROM, 512 bytes of internal SRAM, and 28 GPIO pins in a 32-pin TQFP package. The device also includes a 10-bit ADC, an 8-bit timer/counter, and a 16-bit timer/counter with PWM. An 8-bit AVR microcontroller is a compact embedded-control device built around an enhanced RISC core and non-volatile program memory. The AVR architecture belongs to the broader semiconductor hierarchy of microcontrollers, embedded processors, and programmable controllers. Devices in this class combine firmware storage, general-purpose I/O, analog conversion, and timing peripherals in one package, allowing compact products to perform control, sensing, communication, and actuator functions without a separate processor. The ATTINY828R-AU is based on Microchip's picoPower technology and provides 8 KB of Flash organized as 8K x 8, together with 256 bytes of EEPROM and 512 bytes of SRAM. Its 28 GPIO pins provide flexible connections for switches, sensors, displays, and control signals. The 10-bit ADC is available on GPIO pins, while the 8-bit and 16-bit timer/counters support timing, waveform generation, and PWM-based functions. The enhanced AVR RISC core executes instructions in a single clock cycle, giving the device throughput approaching 1 MIPS per MHz under suitable operating conditions. This architecture is useful in responsive embedded-control loops because it can complete instruction sequences quickly while retaining the simplicity of an 8-bit platform. picoPower technology is intended to help reduce power consumption in compact, battery-operated equipment. Typical uses include industrial sensor nodes, compact motor controllers, LED lighting controllers, wearable accessories, smart-home modules, and compact consumer appliances. In these systems, the microcontroller can acquire analog measurements through its ADC, execute control algorithms from Flash, and operate timers or PWM outputs while retaining a small 32-pin surface-mount footprint. PCB design should preserve clean analog grounding near ADC inputs, route high-current or switching signals away from sensitive measurement traces, and follow the manufacturer's pin and decoupling guidance. Firmware should use the documented AVR peripheral libraries and account for watchdog, sleep, brownout, and clock configuration behavior before production deployment. This page combines the ATtiny828 family specifications, package information, source links, application guidance, and a focused replacement analysis to help engineers evaluate the ATTINY828R-AU for embedded-control designs.

Permintaan RFG Kontak
ATTINY84-20MU 20MHz 8KB AVR MCU | Microchip Technology
ATTINY84-20MU

ATTINY84-20MU 20MHz 8KB AVR MCU | Microchip Technology

The Microchip Technology ATTINY84-20MU is an 8-bit AVR microcontroller rated for operation up to 20 MHz, with 8 KB of flash program memory, 512 bytes of EEPROM, 512 bytes of SRAM, and a 20-QFN-EP package measuring 4 x 4 mm. The device operates from 2.7 V to 5.5 V and is specified over the -40°C to +85°C temperature range. Its 12 general-purpose I/O lines support compact embedded-control designs requiring substantial flash memory in a small surface-mount footprint. An 8-bit microcontroller is a microprocessor integrated with memory, peripherals, and I/O in one semiconductor package. The ATtiny84 belongs to the TinyAVR family, which combines the AVR enhanced RISC architecture with low-power operation and a compact pin count. Within the hierarchy of embedded semiconductors, ATtiny84 devices are microcontrollers, controllers, and programmable logic devices commonly used for local sensing, actuation, signal conversion, and system supervision. Key features include an 8-bit AVR core operating at up to 20 MHz, 8 KB of built-in flash, 512 bytes of EEPROM, 512 bytes of SRAM, 12 general-purpose I/O pins, and an 8-channel 10-bit ADC. Two 8-bit and 16-bit timer/counter sections provide timing and PWM functions, while internal and external interrupt sources support responsive event-driven control. The operating range of 2.7 V to 5.5 V allows use in both 3.3 V and 5 V systems. The TinyAVR architecture is based on a RISC processor core using 32 general-purpose working registers. The ATTINY84-20MU combines this register-based execution model with on-chip nonvolatile storage and analog conversion, reducing external component count. Its 20-QFN-EP construction supports compact boards, while the exposed-pad package option requires attention to PCB copper and soldering during assembly. Typical applications include compact sensor nodes, industrial condition-monitoring modules, low-power instrument controls, LED lighting controllers, battery-operated accessories, and small automation products. The 12 I/O lines can connect switches, sensors, indicators, and actuators, while the ADC supports direct measurement of analog inputs. The 8 KB flash capacity is suitable for moderate control logic rather than connectivity-heavy firmware. PCB design should preserve clean routing around the exposed pad and provide the decoupling and programming access required by the device package. Confirm ADC input ranges, timer outputs, reset behavior, and programming connections against the manufacturer pin description table before layout release. The -40°C to +85°C specification supports industrial-temperature environments, but the finished assembly must also remain within its own thermal limits. This page combines the ATtiny84 manufacturer specifications, package information, lifecycle status, practical design guidance, and comparison data to support component selection and PCB planning. It also distinguishes exact drop-in options from alternatives that require different memory configurations or package construction.

Permintaan RFG Kontak
ATTINY841-MMH - 16MHz 8KB AVR MCU | Microchip Technology
ATTINY841-MMH

ATTINY841-MMH - 16MHz 8KB AVR MCU | Microchip Technology

Microchip Technology ATTINY841-MMH is an 8-bit AVR embedded microcontroller with a 16 MHz maximum clock, 8 KB of flash program memory and a 20-VQFN surface-mount package measuring 3 x 3 mm. The device is part of the ATtiny841 family and combines compact digital control, embedded data storage and analog measurement capabilities in a space-efficient package. A microcontroller is a programmable semiconductor that integrates a processor core, memory and peripheral circuits on one die. Within the product hierarchy, the ATTINY841-MMH is an AVR embedded MCU, part of the TinyAVR family, and belongs to the broader 8-bit microcontroller and embedded-controller category. Its compact footprint makes it particularly suitable for small control modules, sensor nodes and compact consumer equipment where every board area matters. Key features include 8 KB of flash memory for firmware, a 16 MHz operating clock and a 20-pin VQFN package. The ATtiny841 family also supports integrated analog-to-digital conversion, analog comparison and port pin-change interrupt functions. These features allow a design to replace discrete sensing and control circuitry, reducing component count while retaining deterministic firmware-based behavior. The manufacturer lists the ATtiny841 family as in production. The ATTINY841-MMH uses Microchip's AVR architecture and combines program memory, data EEPROM and SRAM with configurable I/O ports. Port pins support digital input and output as well as alternate functions including analog comparator and ADC channels. The family's 16 MHz operating point provides a practical balance between processing throughput, power consumption and clock design simplicity for embedded control tasks. Typical applications include compact industrial sensor modules, building and appliance control boards, battery-powered IoT devices, LED lighting controllers and small motor-control subsystems. For motor or relay outputs, designers should account for the load transients and supply requirements of the external driver rather than driving the output directly from the MCU. A critical layout consideration is the exposed thermal pad on the 20-VQFN package. It must be connected to the intended ground plane and soldered according to the manufacturer's land-pattern and reflow guidance. Place decoupling capacitors close to the supply pins, preserve the recommended clock layout, and route sensitive analog inputs away from fast-switching nodes. This page combines the manufacturer's device status and datasheet information with practical selection guidance, verified package details, programming references and drop-in alternatives for engineers evaluating the ATTINY841-MMH.

Permintaan RFG Kontak
ATTINY841-MU - 16MHz 8KB AVR MCU | Microchip Technology
ATTINY841-MU

ATTINY841-MU - 16MHz 8KB AVR MCU | Microchip Technology

The Microchip Technology ATTINY841-MU is an 8-bit AVR microcontroller rated for up to 16 MHz operation, with 8 KB of embedded Flash memory and a 20-pin QFN with exposed pad (EP) package measuring 4 mm by 4 mm. It operates from 1.7 V to 5.5 V, supports a -40°C to +85°C temperature range, and includes a 10-bit, 12-channel ADC, 512 bytes of SRAM, and 512 bytes of EEPROM according to the supplied distributor specification data. An 8-bit AVR microcontroller is a compact embedded-control device that combines a processor core, nonvolatile Flash program memory, data memory, and peripherals on one semiconductor die. The ATtiny841 belongs to the TinyAVR family within the broader hierarchy of 8-bit microcontroller, embedded controller, and semiconductor products. It is intended for control-oriented designs where deterministic low-power operation, analog measurement, and a small board footprint are more important than high processing throughput. Key features include a 16 MHz maximum clock, 8 KB of Flash program storage, 512 bytes of SRAM, 512 bytes of EEPROM, and a 10-bit ADC with 12 channels. Its operating-voltage range of 1.7 V to 5.5 V supports both low-voltage battery-powered equipment and conventional 3.3 V or 5 V systems. The 20-pin QFN-EP package also provides a compact surface-mount footprint and an exposed thermal pad for board-level heat spreading. The ATtiny841 architecture uses the AVR 8-bit instruction set and provides integrated analog and digital resources for embedded control. The manufacturer documents programmable I/O behavior, tri-state input operation, and alternative peripheral functions including analog-comparator, analog-to-digital converter, and pin-change-interrupt capabilities. Programming and debugging are supported through Microchip’s in-circuit programming and debug ecosystem, including MPLAB Snap connectivity described on the official product page. Typical applications include compact sensor nodes, industrial control modules, low-power instrumentation, digital control panels, compact power converters, and mixed-signal monitoring equipment. The 12-channel ADC allows multiple analog inputs to share one controller, while 8 KB of Flash accommodates application firmware and configuration logic. For designs near the upper voltage limit, designers must also account for supply tolerance, clock configuration, and component derating. The exposed pad must be connected according to the manufacturer’s land-pattern and thermal guidance rather than treated as an unused pin. PCB layout should preserve short analog and power paths, provide the required decoupling capacitors, and route high-impedance sensor inputs away from noisy switching nodes. Firmware and pin multiplexing should be checked against the linked ATtiny441/ATtiny841 datasheet before a new PCB is released. This page consolidates the supplied distributor specifications, official manufacturer links, lifecycle information, packaging data, and qualified drop-in considerations. It also distinguishes verified package-compatible alternatives from broader functional equivalents, helping engineers compare migration options without treating devices with different memory, voltage, or peripheral capabilities as interchangeable.

Permintaan RFG Kontak
ATTINY84A-CCU - 20MHz 8-bit AVR MCU | Microchip Technology
ATTINY84A-CCU

ATTINY84A-CCU - 20MHz 8-bit AVR MCU | Microchip Technology

The Microchip Technology ATTINY84A-CCU is an 8-bit AVR RISC-based microcontroller operating up to 20 MHz, with 8 KB of ISP flash memory, 512 bytes of EEPROM, 512 bytes of SRAM, and 12 general-purpose I/O lines. It is packaged in a 15-UFBGA (3x3 mm) package for compact embedded systems. An 8-bit AVR microcontroller is a compact control IC that combines a processor core, nonvolatile program memory, data memory, timers, interrupt logic, and digital and analog peripherals on one device. The ATTINY84A belongs to Microchip's picoPower AVR family, a semiconductor hierarchy in which highly integrated 8-bit controllers suit compact sensing, control, and communication products. Key features include an 8-channel 10-bit analog-to-digital converter, two timer/counters with 8-bit and 16-bit operation, two PWM channels per timer, and a programmable gain stage supporting 1x and 20x gain. The device also provides 32 general-purpose working registers, internal and external interrupts, and ISP programming support. Its 8 KB ISP flash provides sufficient program storage for compact embedded control logic. The AVR architecture uses a RISC instruction set with 32 general-purpose working registers and an 8-bit data path. Two 10-bit ADC channels can operate in differential mode, while the integrated programmable gain stage offers a 20x option for low-level analog signals. These resources allow the microcontroller to combine sensor acquisition, digital control, and timing functions without requiring a separate analog front end. Typical uses include industrial sensor nodes, compact instrumentation, LED and lighting controllers, building-control modules, small consumer products, and embedded Arduino-compatible designs. The 15-UFBGA package reduces board area, but it also makes careful PCB layout, pad inspection, and assembly planning important in production. For a new design, verify the complete electrical limits and pin assignments in the manufacturer datasheet before layout release. Confirm regulator voltage, clock configuration, ADC reference, programming access, and decoupling requirements. If low-volume assembly or hand soldering is expected, compare the assembly implications of UFBGA with an available SOIC package before committing the design. This page combines device specifications, application guidance, package information, compatibility analysis, and practical design considerations. It also distinguishes true drop-in replacements from related AVR devices that require a different package, firmware review, or board redesign.

Permintaan RFG Kontak
ATTINY84A-MF - 20MHz 8KB AVR Microcontroller | Microchip
ATTINY84A-MF

ATTINY84A-MF - 20MHz 8KB AVR Microcontroller | Microchip

Microchip Technology ATTINY84A-MF is an 8-bit AVR RISC-based microcontroller with 8 KB of in-system programmable Flash memory, 512 bytes of EEPROM, 512 bytes of SRAM, 12 general-purpose I/O lines, and a maximum clock speed of 20 MHz. The device is supplied in a 20-QFN exposed-pad package measuring 4 x 4 mm and is specified for high-grade operation up to +125°C. An AVR microcontroller is a compact embedded-control IC that combines a processor core, nonvolatile program memory, data memory, I/O ports, timers, and serial interfaces on one chip. Within the product hierarchy, the ATTINY84A belongs to the 8-bit AVR family, the TinyAVR class, and the broader embedded-processing and semiconductor categories. Its picoPower architecture is designed for efficient operation in small control systems where cost, board area, and energy consumption matter as much as processing capacity. The ATTINY84A-MF provides 32 general-purpose working registers, two timer/counters with 8-bit and 16-bit operation, and two PWM channels. Its 12 I/O lines can support digital control, sensing, communication, and timing functions. The combination of 8 KB Flash, 512 bytes of EEPROM, 512 bytes of SRAM, and a 20 MHz clock allows embedded firmware to combine event handling, sensor conditioning, actuator control, and serial data exchange in one compact device. Program development uses the AVR instruction architecture and the in-system programming interface described by Microchip for the ATtiny84A family. The manufacturer product page identifies MPLAB Snap debug and programming support through an 8-pin single in-line connector using two I/O pins and the reset line. This integration of ICSP programming and debug access supports compact boards where a dedicated connector can save space without eliminating field programming or in-circuit debugging. Typical uses include industrial sensor nodes, compact environmental monitors, LED lighting controllers, small motor-control loops, smart accessories, and communications modules. The 12 I/O lines are particularly useful when a design needs several discrete inputs and outputs but does not require a larger 32-bit MCU. The exposed thermal pad also assists heat transfer from the device, making copper-based PCB thermal management an important part of compact, high-duty-cycle installations. Designers should verify the complete pin assignment, exposed-pad connection, operating-voltage limits, clock requirements, and programming interface against the Microchip ATtiny24A/44A/84A datasheet. Place the decoupling capacitors close to the supply pins, preserve the required exposed-pad copper and thermal-relief pattern, and route programming signals to avoid interference from switching nodes. Confirm startup, reset, and external-clock behavior before committing the PCB layout. This product page combines the core ATtiny84A specifications with practical programming, PCB-layout, thermal-management, and replacement guidance. It also distinguishes same-footprint family options from alternatives that require a different package, helping engineers evaluate upgrades without assuming that similar memory sizes or family names guarantee PCB compatibility.

Permintaan RFG Kontak
ATTINY84A-MUR - 20MHz 8KB AVR MCU | Microchip
ATTINY84A-MUR

ATTINY84A-MUR - 20MHz 8KB AVR MCU | Microchip

The Microchip Technology ATTINY84A-MUR is a picoPower 8-bit AVR RISC microcontroller with a 20 MHz maximum clock, 8 KB of in-system programmable flash memory, 512 bytes of EEPROM, 512 bytes of SRAM, and 12 general-purpose I/O lines. The device is housed in a 20-lead QFN package with an exposed pad, measuring 4 mm by 4 mm, for compact embedded control designs. An 8-bit microcontroller is a programmable semiconductor that executes a compact instruction set to read sensors, control actuators, and manage communications. Within the product hierarchy, the ATTINY84A belongs to the AVR 8-bit microcontroller family, the TinyAVR subfamily, and the power-efficient picoPower product line. It combines small memory capacity with dedicated analog and timing resources for cost-sensitive embedded systems. Principal features include an 8-channel, 10-bit successive-approximation analog-to-digital converter, two timer/counters with 8-bit and 16-bit operating modes, four PWM channels, 32 general-purpose working registers, internal and external interrupt capability, and an 8 KB ISP Flash program memory area. The 12 GPIO pins support digital interfaces, while the ADC provides 10-bit conversion resolution for analog measurement and control. The ATTINY84A operates across a 1.8 V to 5.5 V supply range and an industrial temperature range of -40 °C to +85 °C. Its RISC architecture and picoPower technology target low processing overhead and efficient operation in battery-powered equipment. ISP programming allows firmware to be loaded and updated through a dedicated programming interface, while the same pins also provide ICSP debugging capability described by Microchip. Typical uses include compact sensor nodes, battery-operated instrumentation, LED lighting controllers, analog monitoring modules, compact motor-control subsystems, and small automation controllers. The 4 mm square QFN-EP package reduces board area, while the exposed thermal pad improves heat dissipation when the device operates continuously. For PCB design, route the exposed pad to ground and follow the manufacturer land-pattern and thermal-via requirements. Provide a stable local supply decoupling arrangement, reserve the ISP programming pins, and verify the external crystal or clock configuration in the manufacturer datasheet before fabrication. Because the ATTINY84A is a memory-limited 8-bit device, applications should avoid unnecessary interrupt service routines and oversized data buffers. This product page consolidates the core electrical characteristics, package details, programming resources, application guidance, comparison parameters, and the only verified same-footprint alternative for engineering evaluation and sourcing decisions.

Permintaan RFG Kontak
ATTINY84A-PU - 8-Bit 20MHz AVR MCU with 8KB Flash | Microchip
ATTINY84A-PU

ATTINY84A-PU - 8-Bit 20MHz AVR MCU with 8KB Flash | Microchip

The Microchip Technology ATTINY84A-PU is an 8-bit AVR RISC-based microcontroller with 8 KB of in-system programmable flash memory, 512 bytes of EEPROM, 512 bytes of SRAM, and 12 general-purpose I/O lines. It operates at up to 20 MHz and is packaged in a breadboard-friendly 14-pin PDIP package. The device also provides two 8-bit/16-bit timer/counters with two PWM channels. A microcontroller is a compact programmable controller that integrates a CPU core, memory, I/O ports, timers, and communication peripherals on one semiconductor die. The ATTINY84A belongs to the ATtiny AVR family, whose product hierarchy is 8-bit AVR RISC microcontroller, general-purpose microcontroller, embedded processor, and semiconductor. Its combination of 12 I/O lines, serial programming, and analog conversion capability makes it useful for compact embedded-control boards. Key features include 8 KB ISP flash memory, 512 bytes of EEPROM, 512 bytes of SRAM, 32 general-purpose working registers, 12 general-purpose I/O lines, and a 10-bit ADC. The AVR architecture provides a rich instruction set for embedded control, while the 20 MHz maximum clock rate supports more responsive control loops than its 10 MHz counterparts. Two timer/counters with PWM outputs support motor, dimming, and waveform-generation tasks. The ATTINY84A also integrates a Universal Serial Interface, as identified by the published product overview, for serial communication using external or internal peripherals. In-System Serial Programming and in-circuit debugging are supported through the dedicated programming interface. This combination allows firmware to be programmed directly on the assembled PCB without a separate socketed programmer. Typical uses include compact sensor controllers, LED dimmers, small motor-control boards, programmable timers, and communication modules. Its 14-pin PDIP package is particularly suitable for breadboard prototyping, through-hole educational platforms, and low-volume designs where a surface-mount package would complicate assembly. When laying out a design, confirm that every ADC input has an appropriate analog reference and that unused I/O pins are left in a defined state. Because the -PU ordering code denotes a 14-pin PDIP package, verify that the PCB footprint matches the 0.300-inch, 7.62 mm row spacing specified by the package data before committing a new design. This page consolidates distributor availability information, verified memory and clock specifications, practical application guidance, and clearly qualified drop-in alternatives. It also identifies the parts and parameters that must be checked before treating another AVR device as a replacement.

Permintaan RFG Kontak
ATTINY85-20MU - 20MHz 8KB AVR MCU | Microchip Technology
ATTINY85-20MU

ATTINY85-20MU - 20MHz 8KB AVR MCU | Microchip Technology

The Microchip Technology ATTINY85-20MU is an 8-bit AVR ATtiny microcontroller rated for operation up to 20 MHz, with 8 KB of flash memory organized as 4K x 16 words, 512 bytes of EEPROM, and 512 bytes of SRAM. The device is supplied in a 20-pin QFN package with an exposed pad measuring 4 x 4 mm. An ATtiny microcontroller belongs to the AVR family of 8-bit embedded processors. These devices combine a compact RISC processor core, nonvolatile program and data memory, and integrated peripherals in a small surface-mount package. Within the broader semiconductor hierarchy, the ATTINY85-20MU is a microcontroller rather than a general-purpose analog or digital logic IC, making it suitable for compact control systems requiring embedded code execution, sensor measurement, and programmable I/O. Key features include a maximum clock frequency of 20 MHz, an 8 KB in-system programmable flash memory, 512 bytes of EEPROM, 512 bytes of SRAM, a 5 V ADC, and operation from a 3.3 V to 5 V supply. Its 8 KB flash capacity provides substantially more program space than the smallest ATtiny devices, while the compact 20-pin QFN-EP package supports space-constrained embedded products. The ATTINY85-20MU combines two 8-bit timers, a 4-channel 10-bit ADC, USART, SPI, and TWI communication interfaces. These resources allow one controller to manage time-critical switching, analog sensing, and serial communications without requiring a larger system controller. The exposed pad provides a thermal and ground connection beneath the QFN body and must be connected according to the manufacturer's land-pattern requirements. Typical applications include compact industrial controls, sensor nodes, lighting controllers, battery-powered accessories, wearable electronics, and small automation products. The 20 MHz operating limit also makes it appropriate for communication, timing, and control tasks that need more processing headroom than low-speed 8-bit designs. PCB implementation should follow the manufacturer's QFN land pattern and maintain the exposed-pad connection to ground. Confirm the programmed clock divider and fuse settings before changing the operating frequency, and validate signal routing and thermal performance across the full intended temperature range. This page combines the verified device characteristics with practical implementation guidance, package constraints, application analysis, and structured replacement considerations. It highlights where the 20 MHz clock, 8 KB flash, 512-byte EEPROM, and 512-byte SRAM determine whether the ATTINY85-20MU is suitable for a compact embedded design.

Permintaan RFG Kontak
ATTINY85-20PU - 20MHz 8-Bit AVR MCU | Microchip Technology
ATTINY85-20PU

ATTINY85-20PU - 20MHz 8-Bit AVR MCU | Microchip Technology

The Microchip Technology ATTINY85-20PU is a low-power CMOS 8-bit AVR enhanced RISC microcontroller rated for 20 MHz operation, with 8 KB of in-system programmable Flash, 512 bytes of EEPROM, and 512 bytes of SRAM in an 8-pin through-hole DIP package. The supplied distributor data also identifies a 4-channel 10-bit ADC and six I/O pins. An 8-bit microcontroller is a compact programmable controller that executes firmware to read sensors, control actuators, sequence power systems, and manage communication interfaces. The ATtiny85 belongs to Microchip's ATtiny family and uses the AVR architecture, combining small instruction-level complexity with integrated Flash, EEPROM, SRAM, timers, serial interfaces, and analog conversion functions. The ATTINY85-20PU's principal verified characteristics include an 8 KB Flash program memory organized as 4K x 16, 0.512 KB EEPROM, a 20 MHz maximum clock, six I/O pins, and a 2.7 V to 5.5 V supply range reported in the cross-reference data. Its in-system programmability supports programming and updating without removing the device from a finished assembly. The device is appropriate when a design needs more processing capability than the smallest ATtiny devices but very little board area, cost, and energy use. Its 8-pin DIP format is particularly useful for prototyping, repairable assemblies, and through-hole industrial controls where manual insertion and socketed replacement are advantageous. Typical uses include compact sensor nodes, LED lighting controls, battery-powered timers, small motor controls, fan controllers, and simple SPI or I2C peripherals. Designers must still budget the limited 8 KB program memory, 512-byte SRAM, and six I/O pins when selecting it for a new application. Keep bypass capacitance close to the supply pins and route high-current outputs away from sensitive analog inputs. Although the package supports external clocking, the exact oscillator, reset, programming, and unused-pin requirements must be taken from the current manufacturer datasheet before layout release. This page consolidates verified distributor specifications, package information, sourcing links, application guidance, and the limits of the available substitute data. It distinguishes confirmed facts from parameters that still require direct verification rather than presenting unsupported drop-in replacements as equivalent devices.

Permintaan RFG Kontak
ATTINY85-20SU - 8-Bit 20MHz AVR MCU | Microchip
ATTINY85-20SU

ATTINY85-20SU - 8-Bit 20MHz AVR MCU | Microchip

The Microchip ATTINY85-20SU is an 8-bit AVR RISC microcontroller rated at 20 MHz, with 8 KB of in-system programmable flash, 512 bytes of EEPROM, and 512 bytes of SRAM in an 8-pin SOIC package. The device also provides six general-purpose I/O lines and an integrated ADC, making it suitable for compact embedded-control, sensing, and low-power automation designs. A microcontroller is a programmable semiconductor that integrates a CPU core, nonvolatile program memory, data memory, and peripherals on one device. The ATTINY85 belongs to the TinyAVR hierarchy: it is a low-power CMOS 8-bit microcontroller built around the AVR enhanced RISC architecture. Its small memory footprint and compact package are useful when the application requires local control without a larger processor or external memory. Key verified features include 8 KB flash organized as 4K × 16, 512 bytes of EEPROM, 512 bytes of SRAM, six general-purpose I/O lines, 20 MHz operation, and an integrated 10-bit ADC according to the distributor and manufacturer-linked sources. The device also supports ISP programming, making firmware updates possible through the serial programming interface. Its 8-SOIC package is surface-mount and suitable for compact PCB layouts. The ATTINY85 architecture is designed for simple control tasks that combine digital inputs, ADC measurements, timer activity, and PWM generation. Its 32 general-purpose working registers and one 8-bit timer/counter with compare modes support efficient small firmware routines. The verified data identifies the part as a functional-safety-related Microcontroller IC, although detailed safety certification parameters were not provided and should be confirmed from the manufacturer datasheet before safety-critical use. Typical applications include battery-powered sensor nodes, compact motor-control interfaces, LED and indicator controllers, simple analog measurement systems, small consumer products, and compact industrial control modules. The six I/O lines are sufficient for small mixed-signal systems when pin multiplexing is carefully planned. The ADC allows analog inputs to be digitized without a separate converter, although the verified source set does not provide its full electrical limits. A key design consideration is memory planning. Firmware must fit within the verified 8 KB flash capacity, while initialized data and stack usage must remain within 512 bytes of SRAM. For battery-powered designs, use the low-power operating modes and avoid leaving unused I/O pins in undefined states. Confirm voltage, clock, ADC accuracy, and absolute maximum ratings from the current Microchip datasheet before releasing a production design. This page combines verified distributor specifications, source traceability, application guidance, and replacement constraints to help engineers evaluate the ATTINY85-20SU beyond a basic catalog listing. It emphasizes what is confirmed from the supplied data and clearly separates missing electrical details from verified facts.

Permintaan RFG Kontak