Produk (21.000+)

LPC4330FET180Y - Dual-Core 204MHz MCU | NXP
LPC4330FET180Y

LPC4330FET180Y - Dual-Core 204MHz MCU | NXP

The NXP Semiconductors LPC4330FET180Y is a dual-core 32-bit Arm Cortex-M4/M0 microcontroller rated at up to 204 MHz, with 264 kB of SRAM, 118 I/O lines, and a 180-pin TFBGA package measuring 12 mm by 12 mm. It is a ROMless microcontroller designed for embedded signal-processing, control, and communications systems requiring substantial peripheral connectivity. A microcontroller is a programmable semiconductor that integrates a processor core, memory interface, peripherals, and I/O into one device. The LPC4330FET180Y belongs to the Arm Cortex-M family of 32-bit embedded processors. Its Cortex-M4 core supports single-cycle multiply-accumulate, SIMD instructions, and hardware floating-point operations, while the Cortex-M0 coprocessor can handle I/O and digital-control tasks. This division supports responsive signal processing without relying on an external processor. The device combines 264 kB of SRAM with two high-speed USB interfaces and integrated Ethernet, CAN, AES, SPIFI, and SGPIO functions. Its 118 I/O lines and 32-bit external data bus suit designs that need substantial parallel connectivity. The manufacturer lists LPC4330FET180 as active, while LPC4330FET180Y denotes the orderable temperature and packaging configuration associated with that product. The mixed Cortex-M4 and Cortex-M0 architecture separates computationally intensive floating-point and DSP work from interrupt-driven peripheral control. The Cortex-M4 core can execute DSP-oriented instruction sequences efficiently, while the Cortex-M0 coprocessor handles real-time control tasks and external communication servicing. This combination can reduce the complexity of designs that would otherwise require multiple processors or a higher-cost application processor. Typical applications include industrial control systems, networked embedded equipment, USB-to-Ethernet gateways, motor and motion controllers, instrumentation, CAN-connected machines, and high-speed data-acquisition equipment. The broad I/O count and integrated communication interfaces are particularly useful when the design must consolidate several peripheral functions onto a single board. Designers should verify the exact ball assignments, power-supply requirements, boot configuration, external memory interface, and high-speed signal-integrity constraints in the NXP datasheet before layout. A 180-pin TFBGA also requires careful escape routing, via-in-pad or via-under-bump process selection, and a thermal-aware ball grid design rather than a simple two-layer assembly. This product overview consolidates the core architecture, memory capacity, package information, communication features, application fit, and practical PCB considerations into one engineering reference. It is designed to accelerate part selection while preserving the importance of checking the manufacturer documentation for production implementation details.

Permintaan RFG Kontak
LPC4330FET256 - Dual-core Cortex-M4/M0 MCU, 264KB SRAM | NXP
LPC4330FET256

LPC4330FET256 - Dual-core Cortex-M4/M0 MCU, 264KB SRAM | NXP

The NXP Semiconductors LPC4330FET256 is a dual-core ARM Cortex-M4/M0+ microcontroller with 264 KB SRAM, two High-Speed USB 2.0 ports with on-chip PHY, 10/100 Ethernet MAC, CAN 2.0, AES engine, SPIFI, SGPIO, and SCT timer/PWM subsystem, housed in a 256-ball LBGA (17x17 mm) package. It operates from a 2.2 V to 3.6 V supply, runs the M4 core up to 204 MHz and the M0 coprocessor up to 204 MHz, and integrates 83 GPIOs supporting multiple serial, parallel, and analog interfaces. What is a microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (SRAM and non-volatile storage), and programmable I/O peripherals. The LPC4300 series is positioned as a high-performance digital signal controller class MCU, combining deterministic real-time DSP from the Cortex-M4 with the low-latency I/O handling of a Cortex-M0 coprocessor — a hypernym hierarchy of MCU -> embedded processor -> semiconductor. The 'flashless' designation means the LPC4330 has no on-chip flash; code is executed from external QSPI flash via SPIFI or from internal SRAM, which simplifies the silicon for high-reliability designs and supports secure-boot applications. Key features include dual-core asymmetric multiprocessing (Cortex-M4 with FPU + Cortex-M0), 264 KB total SRAM, two Hi-Speed USB 2.0 ports with integrated PHY, 10/100 Ethernet MAC, CAN 2.0B, AES-128 hardware accelerator, SPI Flash Interface (SPIFI) for external code storage, Smart GPIO (SGPIO), State Configurable Timer (SCT), LCD controller supporting up to 1024 x 768, 12-bit ADC, 10-bit DAC, and a Smart Card interface. The LBGA256 package is rated for -40 C to +85 C operation. Technical depth: the Cortex-M4 includes a single-precision IEEE 754 floating-point unit and DSP extensions (SIMD, MAC), enabling audio, motor-control, and signal-processing workloads; the Cortex-M0 offloads real-time I/O servicing so the M4 core is never blocked. Memory architecture: 264 KB SRAM is split between system RAM and peripheral buffers; SPIFI provides XIP (execute-in-place) from Quad-SPI flash at up to 40 MB/s, eliminating the need for parallel memory bus. The HS-USB PHY embeds the 1.5 kOhm pull-up and current-mode termination so only external capacitors are required on D+/D-. Typical applications include industrial control HMI with TFT LCD, multi-axis motor control, audio processing, USB peripherals and hubs, Ethernet-connected IoT gateways, secure payment terminals, point-of-sale systems, robotics, and dual-core asymmetric processing designs where the M0 handles comms and the M4 runs control loops. The wide peripheral set also suits smart-meter, medical instrumentation, and printer/scanner controllers. Design consideration: because the part is flashless, every board must boot from an external SPIFI flash, ISP-mode UART, or USB DFU. Validate SPIFI timing at your M4 clock; the SPIFI controller must be reconfigured for each flash JEDEC ID. The LBGA256 requires a 0.8 mm ball pitch and PCB microvia/stacked-via process for fan-out. This page synthesizes distributor pricing, drop-in alternatives within the same LBGA256 footprint, and practical design notes not found on a single manufacturer datasheet page.

Permintaan RFG Kontak
LPC4333JBD144E - Dual-Core 204MHz Cortex-M4/M0 MCU | NXP
LPC4333JBD144E

LPC4333JBD144E - Dual-Core 204MHz Cortex-M4/M0 MCU | NXP

The NXP Semiconductors LPC4333JBD144E is a dual-core 32-bit Arm Cortex-M4/M0 microcontroller rated up to 204 MHz, with 512 KB of flash, 136 KB of on-chip SRAM, Ethernet, two high-speed USB interfaces, LCD support, and enhanced multipoint microcontrollers in a 144-pin LQFP package measuring 20 x 20 mm. A microcontroller is a programmable embedded-system controller that integrates a processor core, memory, and peripherals on one semiconductor device. Within the product hierarchy, the LPC4333 belongs to the Arm Cortex-M4 microcontroller class and combines an application processor with an Arm Cortex-M0 coprocessor. The secondary core can handle independent control tasks while the main core executes application, communications, and real-time processing functions. Key features include the dual-core Arm Cortex-M4/M0 architecture, a maximum 204 MHz operating frequency, 512 KB of flash memory, and 136 KB of SRAM. Communications and connectivity features include Ethernet, two high-speed USB ports, and a quad SPI Flash Interface, or SPIFI. The device also provides an LCD interface and enhanced multipoint microcontroller functionality, making it suitable for embedded systems requiring a broad mix of control and communications peripherals. Technically, the LPC4333 family combines a 32-bit Cortex-M4 main core with a 32-bit Cortex-M0 coprocessor. The coprocessor is useful for peripheral control, diagnostic routines, background processing, or workload separation where independent execution can improve system responsiveness. Its extensive pin count provides access to multiple communication and general-purpose interfaces, while the 20 x 20 mm LQFP package supports conventional leaded-board assembly and inspection. Typical applications include industrial gateways, Ethernet-connected controllers, USB-to-Ethernet equipment, human-machine interfaces, networked embedded systems, and real-time control platforms. The combination of Ethernet, two high-speed USB interfaces, LCD support, and dual-core processing supports designs that must combine human-interface connectivity, peripheral control, and network communications in one device. Designers should verify the complete pin assignment, power requirements, peripheral multiplexing, and board-level support circuitry against the manufacturer datasheet before layout. LQFP-144 routing is demanding, but its exposed lead geometry supports solder-joint inspection and can simplify prototype assembly compared with a very fine-pitch BGA package. This page consolidates the verified NXP and distributor information, focused drop-in alternatives, package-aware comparisons, and practical selection guidance to help engineers evaluate the LPC4333JBD144E for embedded networking, USB, and dual-core control designs.

Permintaan RFG Kontak
LPC4333JET100E - 204MHz Dual-Core MCU with 512KB Flash | NXP
LPC4333JET100E

LPC4333JET100E - 204MHz Dual-Core MCU with 512KB Flash | NXP

NXP Semiconductors LPC4333JET100E is a 32-bit dual-core Arm Cortex-M4/M0 microcontroller with a 204 MHz Cortex-M4 processor, 512 KB of on-chip flash, 136 KB of on-chip SRAM, and a 100-TFBGA package measuring 9 x 9 mm. The device combines Cortex-M4 application processing with an Arm Cortex-M0 coprocessor for parallel control and peripheral-oriented workloads. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, communication peripherals, timers, and general-purpose I/O into one package. The LPC4333JET100E belongs to the LPC43xx family of Cortex-M4/M0 embedded microcontrollers, combining the LPC4300 series performance level with flexible peripherals and external memory interfaces. Its Ethernet, USB, LCD, and configurable peripheral resources make it suitable for connected embedded equipment rather than simple standalone control. Key features include a 204 MHz Arm Cortex-M4 core, an additional Arm Cortex-M0 coprocessor, 512 KB of flash, 136 KB of SRAM, Ethernet, two high-speed USB interfaces, LCD support, and advanced configurable peripherals including the State Configurable Timer and Serial General Purpose I/O interface. The LPC4333JET100E also includes an SPI Flash Interface for external serial flash access and on-chip EEPROM capability in the LPC43xx family. The dual-core architecture allows control tasks to execute on the Cortex-M0 coprocessor while the Cortex-M4 handles application processing, protocol management, or higher computational load. The 204 MHz operating speed and generous 136 KB SRAM help reduce external memory pressure in networking, industrial, communications, and human-machine-interface designs. The 512 KB flash provides 16 KB of EEPROM according to the verified NXP product description. Typical applications include Ethernet-connected industrial controllers, USB data-acquisition equipment, LCD human-machine interfaces, communications gateways, and embedded systems requiring multiple high-speed serial interfaces. The 100-TFBGA package also supports compact board layouts, although fine-pitch assembly and careful escape-routing are necessary. Designers should confirm the exact exposed pad, ball assignments, and PCB footprint against the manufacturer datasheet before fabrication. For new designs, the key engineering trade-off is integration versus package complexity. The LPC4333JET100E consolidates dual-core processing, connectivity, memory, and configurable peripherals in a 9 x 9 mm BGA, but it requires careful PCB layout, thermal analysis, and assembly-process control. For existing LPC4333 boards, validated firmware, memory sizing, peripheral configuration, and the TFBGA-100 footprint must be checked before substitution. This page combines verified manufacturer and distributor information with practical application guidance, package considerations, and drop-in comparison data to support component selection, PCB planning, sourcing, and replacement evaluation.

Permintaan RFG Kontak
LPC4333JET256 - Cortex-M4/M0 MCU 512KB Flash 256-LBGA | NXP
LPC4333JET256

LPC4333JET256 - Cortex-M4/M0 MCU 512KB Flash 256-LBGA | NXP

The NXP LPC4333JET256 is a 32-bit dual-core Arm Cortex-M4/M0 microcontroller (MCU) with a Cortex-M4 main core plus a Cortex-M0 coprocessor, both running up to 204 MHz, packaged in a 256-pin LBGA (17x17 mm). The device integrates 512 KB on-chip flash, 136 KB SRAM, 16 KB EEPROM, a quad SPI Flash Interface (SPIFI), an LCD controller, Ethernet MAC, two High-speed USB ports, a State Configurable Timer (SCT), and a Serial General Purpose I/O (SGPIO) interface. It is designed for embedded applications requiring deterministic real-time control alongside rich connectivity. An Arm Cortex-M4/M0 MCU is a heterogeneous multicore microcontroller that pairs a high-performance Cortex-M4 (with DSP and FPU) and an energy-efficient Cortex-M0 coprocessor on the same die, sharing peripherals and memory. The two cores are tool- and code-compatible within the Cortex-M family, allowing developers to offload housekeeping, communication, or low-priority tasks to the M0 while the M4 handles DSP, motor-control loops, or HMI rendering. This architecture sits in the broader taxonomy of: 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. The result is a flexible, low-power embedded platform that bridges 8/16-bit legacy designs and full application-processor-class silicon. Key features include 204 MHz operation on both cores, 512 KB flash with 16 KB EEPROM for non-volatile data, 136 KB total SRAM (split into multiple banks for DMA-friendly access), 4 KB ROM for boot and drivers, an 8-channel General-Purpose DMA controller, up to 164 GPIO, three I2C, two CAN, one Fast-mode Plus I2C, one UART, four USART, two SSP/SPI, and a 10/100 Ethernet MAC with MII/RMII. The integrated LCD controller supports up to 1024x768 STN or 24-bit TFT panels, enabling direct HMI integration. The LPC4333 uses a multilayer AHB/LPB bus matrix for concurrent core and DMA access to SRAM, flash, and peripherals, eliminating contention in typical Cortex-M designs. The SCTimer/PWM subsystem is a programmable state machine that allows complex PWM, capture, and timing sequences without CPU intervention, while the SGPIO interface provides fast parallel-style peripheral I/O useful for camera, FPGA, or display bridges. Typical applications include industrial HMI panels with TFT LCD, motor-control inverter front-ends, building automation gateways with Ethernet and dual USB, point-of-sale terminals, and embedded audio platforms requiring DSP and real-time deterministic I/O. The Ethernet MAC plus dual High-speed USB Host/Device/OTG ports make it a strong fit for connected industrial nodes. When designing with this device, pay close attention to the 256-LBGA PCB layout: use microvia stacks on the BGA pads, follow NXP's recommended 4-layer stack-up with continuous ground planes, and respect the SPIFI trace-length matching for high-speed quad-SPI flash expansion. Decoupling must include 100 nF per VDD/VBAT pin plus bulk 4.7 uF near the regulator output. This page synthesizes distributor pricing, drop-in alternatives within the same 256-LBGA footprint, and practical design notes not found in the manufacturer datasheet.

Permintaan RFG Kontak
LPC4337JBD144E - Dual-Core 204MHz MCU with 1MB Flash | NXP
LPC4337JBD144E

LPC4337JBD144E - Dual-Core 204MHz MCU with 1MB Flash | NXP

The NXP Semiconductors LPC4337JBD144E is a dual-core Arm Cortex-M4/M0 microcontroller with a 204 MHz Cortex-M4 processor, 1 MB of flash memory, up to 136 kB of on-chip SRAM, and 16 kB of EEPROM in a 144-LQFP 20 mm × 20 mm package. The MCU also integrates dual high-speed USB connectivity, Ethernet, a 10-bit ADC, a 10-bit DAC, and flexible serial peripherals for embedded control applications. A microcontroller is a programmable system-on-chip that combines a processor core, memory, communication peripherals, and control interfaces on one integrated circuit. The LPC4337 belongs to the NXP LPC43x family of 32-bit embedded microcontrollers. Its Cortex-M4 core handles control-oriented and computationally intensive tasks, while the Cortex-M0 coprocessor provides an independent execution environment for peripheral servicing, communication, or workload partitioning. Key device features include 1 MB of flash, up to 136 kB of SRAM, and 16 kB of EEPROM. The integrated connectivity includes two high-speed USB interfaces and Ethernet, as described by NXP. Additional peripherals include an eight-channel 10-bit ADC, a one-channel 10-bit DAC, SPIFI flash-interface support, a State Configurable Timer, and Serial General Purpose I/O, making the device useful for data acquisition, communications, control, and human-interface systems. The architecture combines a high-performance 32-bit Arm Cortex-M4 processor running at 204 MHz with a 32-bit Arm Cortex-M0 coprocessor. This dual-core arrangement can reduce interrupt servicing in the main core and allow real-time peripheral routines to execute independently. The 1 MB flash capacity provides room for a larger firmware image, while SRAM and EEPROM support working data, configuration values, and nonvolatile parameters. Typical uses include industrial automation and factory equipment, Ethernet-connected embedded controllers, USB data-acquisition equipment, medical monitoring systems, secure access equipment, and network-connected control products. The dual USB interfaces and Ethernet make it particularly relevant to systems that must bridge service interfaces, host devices, and an Ethernet network without requiring several discrete interface controllers. Designers should verify the exact pin functions, clock configuration, startup behavior, power-supply limits, and peripheral pin multiplexing in the NXP datasheet before layout is released. The 144-LQFP package provides many externally accessible signals, so careful decoupling, a clean ground plane, and controlled-length clock routing remain essential. This page consolidates verified distributor availability, manufacturer feature data, same-family drop-in alternatives, package-aware comparisons, and practical selection guidance. It supplements the raw ordering information with design-oriented context while explicitly identifying parameters that require confirmation from the manufacturer documentation.

Permintaan RFG Kontak
LPC4337JET100E - 204MHz Dual-Core Cortex-M4/M0 MCU, 1MB Flash | NXP
LPC4337JET100E

LPC4337JET100E - 204MHz Dual-Core Cortex-M4/M0 MCU, 1MB Flash | NXP

The NXP Semiconductors LPC4337JET100E is a dual-core 32-bit Arm Cortex-M4/M0 microcontroller running at up to 204 MHz with 1 MB of on-chip flash, 136 kB of SRAM and 16 kB of EEPROM in a 100-ball TFBGA (9 x 9 mm) package. It integrates Ethernet, two high-speed USB ports, an LCD controller, a quad SPI Flash Interface (SPIFI), and the State Configurable Timer (SCT) with the Serial GPIO (SGPIO) interface. A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, and peripherals into a single package. The LPC4337JET100E belongs to the NXP LPC43xx family, a 32-bit microcontroller line built on the Arm Cortex-M4 processor architecture plus an energy-efficient Cortex-M0 coprocessor that is code- and tool-compatible with the M4 core, making it a straightforward replacement path for legacy 8/16-bit designs. Key features include a 204 MHz Arm Cortex-M4 core with a separate Cortex-M0 coprocessor, 1 MB (1M x 8) flash for code and data, 136 kB of SRAM for stack, buffers and DMA descriptors, and 16 kB of EEPROM for non-volatile parameter storage. Two independent high-speed USB controllers, a 10/100 Ethernet MAC, and an LCD interface remove the need for external interface controllers in connected embedded systems. Architecturally the device is a heterogeneous dual-core design: the M4 core handles mainline control logic, while the M0 coprocessor can run independent, low-overhead tasks such as I/O servicing or state monitoring, freeing the main core for deterministic control loops. The configurable peripherals (SCT and SGPIO) allow pin count and event routing to be tuned in software rather than fixed in hardware. Typical applications include industrial Ethernet gateways, HMI and panel controllers, USB-to-Ethernet bridges, data loggers, building automation controllers, and connected test equipment where LCD plus USB plus Ethernet must coexist on a single board. When designing around this device, budget for a 100-ball fine-pitch BGA land pattern with careful via-in-pad or via-under-ball escape routing, and confirm the 3.3 V supply tolerance and decoupling requirements against the NXP datasheet. Both cores share the same clock and bus matrix, so memory bandwidth planning matters for high-rate DMA traffic. This page consolidates verified distributor pricing, lifecycle status, and a curated set of same-footprint alternatives plus practical PCB and design notes that are not collected together in the manufacturer datasheet.

Permintaan RFG Kontak
LPC4337JET256Y - 204MHz Dual-Core MCU | NXP | 256-LBGA
LPC4337JET256Y

LPC4337JET256Y - 204MHz Dual-Core MCU | NXP | 256-LBGA

NXP Semiconductors LPC4337JET256Y is a 32-bit dual-core microcontroller based on Arm Cortex-M4 and Arm Cortex-M0 processor cores, operating up to 204 MHz and packaged in a 256-LBGA (17 x 17 mm) surface-mount package. The device includes 1 MB of flash memory and up to 136 kB of on-chip SRAM for embedded firmware, control logic, communications, and data processing. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one component. The LPC4337 belongs to the NXP LPC43xx family of Cortex-M4 microcontrollers with an energy-efficient Cortex-M0 coprocessor. This dual-core architecture allows the Cortex-M4 core to handle the main control workload while the Cortex-M0 core can execute independent or supporting tasks. The LPC4337JET256Y combines Ethernet connectivity, two high-speed USB interfaces, LCD support, and EMC-related peripherals in one microcontroller. Its 1 MB flash supports larger embedded applications and protocol stacks, while the SRAM accommodates active data, buffers, and real-time workloads. A 16 kB EEPROM provides nonvolatile storage for parameters, calibration data, and configuration records that must survive power loss. Advanced peripherals include the State Configurable Timer, known as SCT, the Serial General Purpose I/O interface, or SGPIO, and a quad SPI Flash Interface known as SPIFI. These resources support precise timing, flexible serial expansion, and communication with external flash devices. The dual Cortex architecture and broad peripheral set make the device suitable for connected industrial, communications, and embedded-control systems. Typical uses include Ethernet-connected industrial controllers, USB interface equipment, human-machine interfaces, and embedded gateways. The 256-LBGA package provides a high pin count for simultaneous communication and control functions, but its fine-pitch layout requires careful PCB design, reliable assembly processes, and adequate inspection coverage. The exposed thermal and power requirements must also be evaluated during thermal design. Designers should use the manufacturer pin-description table and package drawing when assigning every ball and power connection. Place decoupling capacitors close to the supply balls, keep sensitive interfaces away from noisy switching paths, and follow the recommended external-component values. Firmware development requires an Arm Cortex-M4-compatible toolchain, startup support for the dual-core architecture, and device-specific clock, memory, and peripheral initialization. This product summary consolidates the core processor, memory, connectivity, and package characteristics of the LPC4337JET256Y, then connects them to practical design guidance and verified same-package options. It is intended to help engineers evaluate fit, plan layouts, and identify the information still required before release to production.

Permintaan RFG Kontak
LPC4353JBD208E - 204MHz Cortex-M4/M0 MCU | NXP
LPC4353JBD208E

LPC4353JBD208E - 204MHz Cortex-M4/M0 MCU | NXP

NXP LPC4353JBD208E is a 204 MHz dual-core embedded microcontroller based on Arm Cortex-M4 and Arm Cortex-M0 cores, with 512 KB of flash and 136 kB of on-chip SRAM in a 208-lead LQFP package. The LPC4353 family combines a high-performance Cortex-M4 processor with a Cortex-M0 coprocessor for parallel control tasks, and the verified product information identifies quad SPI Flash Interface support, Ethernet connectivity, two high-speed USB interfaces, an LCD interface, and EMC. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one compact device. The Cortex-M4 portion provides the main real-time control platform, while the Cortex-M0 coprocessor can execute supporting tasks independently. This arrangement places the LPC4353 in the hierarchy of embedded processor, microcontroller, and system-on-chip, reducing external processing demand in industrial, communications, and embedded-control systems. Key features include a 204 MHz Cortex-M4 core, an integrated Cortex-M0 coprocessor, 512 KB of flash memory, 136 kB of SRAM, and 16 kB of EEPROM. The family supports a quad SPI Flash Interface, commonly called SPIFI, for high-speed serial flash access. Advanced configurable peripherals include the State Configurable Timer and Serial General Purpose I/O interface, while Ethernet and dual high-speed USB connectivity support network and peripheral data movement. The MCU combines a high-performance main core with an independent low-power coprocessor architecture. The Cortex-M4 core is suitable for demanding control algorithms and connected embedded workloads, while the Cortex-M0 core provides a separate execution environment for peripheral servicing or auxiliary control. Software can allocate tasks according to processing requirements, helping improve responsiveness without requiring a second discrete microcontroller. Typical applications include industrial automation, Ethernet-connected equipment, USB peripheral and host controllers, data acquisition systems, LCD-equipped human-machine interfaces, and high-performance embedded control platforms. The 208-lead LQFP provides extensive external peripheral connectivity for systems that need numerous mixed-signal and digital I/O resources. When laying out the PCB, place decoupling capacitors close to every supply pin, route high-speed and sensitive signals away from switching nodes, and confirm external component values against the manufacturer datasheet and errata. The large lead count also makes careful fanout, via placement, and ground-plane continuity important for reliable signal integrity. This product record combines verified manufacturer and distributor information with practical engineering guidance, package context, commercial availability, and same-family drop-in alternatives that are not consolidated into a single manufacturer datasheet page.

Permintaan RFG Kontak
LPC4357FET256 - Dual-Core Cortex-M4/M0 MCU, 1MB Flash | NXP
LPC4357FET256

LPC4357FET256 - Dual-Core Cortex-M4/M0 MCU, 1MB Flash | NXP

The NXP LPC4357FET256 is a dual-core 32-bit microcontroller combining an ARM Cortex-M4 core with an ARM Cortex-M0 coprocessor, housed in a 256-pin LBGA package (17x17 mm). The device operates at up to 204 MHz on both cores and integrates 1 MB of on-chip flash memory alongside 136 kB of SRAM for data and code storage. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals on a single silicon die. Dual-core Cortex-M4/M0 parts like the LPC4357 belong to a specialized category often called asymmetric multicore MCUs: the Cortex-M4 provides high-performance DSP and floating-point execution, while the Cortex-M0 handles real-time I/O offload. Within the broader taxonomy, the LPC4357 sits in the hierarchy MCU -> 32-bit ARM microcontroller -> Cortex-M4/M0 dual-core -> high-performance signal controller. The LPC43xx family from NXP targets embedded applications that need deterministic I/O and DSP-class signal processing on a single chip. Key features of the LPC4357FET256 include two High-Speed USB 2.0 interfaces with on-chip PHY (Host/OTG/Device configurable), a 10/100 Ethernet MAC, an LCD controller, an external memory controller (EMC), the State Configurable Timer (SCT), Serial GPIO (SGPIO), SPI Flash Interface (SPIFI), CAN, I2C, UART, and a 10-bit ADC. The asymmetric core architecture lets designers offload peripheral servicing to the M0 while running application and DSP code on the M4, reducing latency on time-critical events. The Cortex-M4 core includes a single-precision IEEE 754 floating-point unit and DSP extensions (SIMD, MAC), while the Cortex-M0 supports the ARMv6-M instruction set for low-latency interrupt response. The two cores communicate via a shared mailbox and interrupt mechanism, and the chip integrates a flash accelerator for zero-wait-state execution at 204 MHz from on-chip flash. This combination makes the LPC4357FET256 well suited to motor control, industrial automation, audio processing, and power-conversion applications. Typical applications include industrial drives, PLCs, and fieldbus nodes; medical patient-monitoring and diagnostic equipment; audio processing and effects units; graphics-enabled HMI panels; and high-end IoT gateways. The wide peripheral set allows one device to replace multi-chip solutions that previously required an MCU plus a separate communications controller. When designing with the LPC4357FET256, ensure the LBGA256 PCB land pattern uses microvia or via-in-pad technology for reliable assembly. The 1 MB flash is split into two banks, which allows read-while-write firmware updates - a critical feature for field-serviceable industrial products. Power decoupling requires 100 nF ceramics on every VDD/VSS pair plus bulk 4.7 uF caps near the regulator pins. This page synthesizes distributor pricing, validated drop-in alternatives from the LPC43xx family, and practical design notes not collected in any single manufacturer datasheet.

Permintaan RFG Kontak
LPC4357FET256K - Dual-Core 204MHz MCU with 1MB Flash | NXP
LPC4357FET256K

LPC4357FET256K - Dual-Core 204MHz MCU with 1MB Flash | NXP

NXP Semiconductors LPC4357FET256K is a 32-bit dual-core Arm Cortex-M4/M0 microcontroller with a 204 MHz Cortex-M4 processor, 1 MB of flash memory, 136 kB of SRAM, two high-speed USB interfaces with on-chip PHY, Ethernet, LCD support, and a 256-LBGA package. The Cortex-M4 core handles DSP-intensive work with single-cycle multiply-accumulate, SIMD instructions, and hardware floating-point support, while the Cortex-M0 coprocessor manages I/O and digital control tasks. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces on one device. In the embedded-system hierarchy, the LPC4357FET256K belongs to the 32-bit microcontroller family and combines real-time control capabilities with dedicated signal-processing performance. Its dual-core architecture allows computational work to be separated by task, which can improve responsiveness when an application must maintain control loops while processing data. The LPC4357FET256K combines 1 MB flash for firmware and program storage with 136 kB SRAM for working memory. Its operating feature set includes Ethernet, two high-speed USB ports with integrated PHYs, and LCD connectivity. These interfaces make the device suitable for connected industrial equipment, multimedia control systems, data-acquisition equipment, human-interface systems, and embedded gateways requiring both network connectivity and real-time processing. The Arm Cortex-M4 processor operates at up to 204 MHz and is specifically positioned for embedded signal-processing applications. According to the NXP product information, the M4 core supports single-cycle multiply-accumulate operations, SIMD instructions, and a hardware floating-point unit. The separate Cortex-M0 coprocessor can handle I/O and digital-control duties while the M4 core performs more computationally intensive processing. Because the device uses a 256-LBGA package, PCB design must account for dense ball-pitch layout, via-in-pad requirements, thermal management, and assembly-process compatibility. The two high-speed USB interfaces with on-chip PHY can simplify direct USB connectivity, while Ethernet supports networked control and communications equipment. LCD support allows the MCU to drive graphical or segmented human-interface displays without requiring a separate display controller. For a new design, choose the LPC4357FET256K when the application needs the combination of a 204 MHz Cortex-M4 core, a Cortex-M0 coprocessor, 1 MB flash, 136 kB SRAM, USB, Ethernet, and LCD support in a 256-ball package. Existing boards should use the manufacturer's pin description, recommended footprint, and power-delivery guidance to preserve electrical and mechanical compatibility. This product page organizes the device's core specifications, application guidance, package considerations, and verified replacement information. It also provides direct links to NXP product documentation and a focused engineering comparison for engineers evaluating the LPC4357FET256K in high-performance embedded systems.

Permintaan RFG Kontak
LPC4357JBD2088 - 204MHz Cortex-M4/M0 MCU | NXP
LPC4357JBD2088

LPC4357JBD2088 - 204MHz Cortex-M4/M0 MCU | NXP

NXP Semiconductors LPC4357JBD2088 is a 32-bit Arm Cortex-M4 microcontroller with an Arm Cortex-M0 coprocessor, operating up to 204 MHz, and packaged in a 208-pin LQFP configuration. The device belongs to the LPC435x/3x/2x/1x family of embedded microcontrollers and provides up to 1 MB of flash memory, 136 kB of on-chip SRAM, and 16 kB of EEPROM memory. A microcontroller is a programmable system-on-chip used to control embedded equipment by executing software, sampling sensors, driving peripherals, and managing communications. Within the broader semiconductor hierarchy, this device is an Arm Cortex-M4 microcontroller with an Arm Cortex-M0 coprocessor, combining real-time control capability with a compact embedded-processing architecture. Its coprocessor is code- and tool-compatible with the Cortex-M4 core and offers up to 204 MHz performance with reduced code size. Key features include a quad SPI Flash Interface, or SPIFI, for high-speed serial flash access, plus advanced configurable peripherals such as the State Configurable Timer and Serial General Purpose I/O interface. Two high-speed USB interfaces are listed in the family description, while the device family also supports Ethernet-oriented applications. These resources make the LPC4357JBD2088 suitable for industrial networking, data acquisition, USB-connected control equipment, and systems requiring extensive connectivity. The architecture gives software designers access to a high-performance Cortex-M4 processor while an energy-efficient Cortex-M0 coprocessor can handle suitable background or control tasks. Up to 1 MB of flash supports a comparatively large embedded application, and the 136 kB SRAM plus 16 kB EEPROM provide memory for working data and nonvolatile parameter storage. Exact voltage ranges, peripheral mappings, and pin functions should be confirmed against the manufacturer datasheet for the specific ordering code. Typical uses include EtherNet-based embedded controllers, USB-to-serial data concentrators, motor and motion-control equipment, industrial gateways, and high-speed data loggers. The combination of SPIFI, dual-core processing, high-speed USB, Ethernet, and flexible timer and serial GPIO resources supports designs that consolidate control, communications, and external memory access on one device. For PCB implementation, pay particular attention to the 208-pin LQFP footprint, exposed-pad and thermal requirements, power decoupling, clock stability, high-speed differential routing, and Ethernet magnetics interface. Confirm the complete pin assignment, operating limits, startup sequence, and package details in the NXP documentation before releasing the layout. This product page combines the NXP family architecture with practical interface guidance, application-focused design considerations, and a conservative comparison of documented LPC4357 ordering variants. It is intended to accelerate component selection while preserving the need for datasheet-level verification before hardware release.

Permintaan RFG Kontak
LPC4357JBD208E - 32-Bit Cortex-M4/M0 MCU | NXP | Industrial Control
LPC4357JBD208E

LPC4357JBD208E - 32-Bit Cortex-M4/M0 MCU | NXP | Industrial Control

The NXP Semiconductors LPC4357JBD208E is a 32-bit Arm Cortex-M4 microcontroller with an integrated Cortex-M0 coprocessor, up to 1 MB of flash memory, 136 kB of SRAM, and 16 kB of EEPROM in a 208-pin LQFP package. It combines high-performance embedded control with Ethernet, two high-speed USB interfaces, LCD support, and advanced configurable peripherals for industrial, communications, and consumer applications. A microcontroller is an integrated circuit containing a processor core, memory, and peripherals on one die. The LPC4357JBD208E belongs to the Arm Cortex-M4/M0 MCU family, combining a high-performance Cortex-M4 processor with an energy-efficient Cortex-M0 coprocessor. This architecture allows one device to handle control tasks, communications, and real-time workloads while keeping software development within the Arm ecosystem. Key features include up to 1 MB of embedded flash, 136 kB of on-chip SRAM, 16 kB of EEPROM, a quad SPI Flash Interface, Ethernet, two high-speed USB ports, LCD functionality, the State Configurable Timer, and Serial General Purpose I/O. The Cortex-M0 coprocessor is upward code- and tool-compatible with the Cortex-M4 core and is designed to reduce code size when replacing traditional 8-bit and 16-bit designs. The dual-core Arm architecture supports flexible partitioning between application processing and low-power or peripheral-control tasks. The device is supplied in a 208-pin LQFP package for surface-mount PCB assembly. Its extensive peripheral set can reduce the need for external interface components in embedded systems that require USB, Ethernet, display control, or multiple timer functions. Typical uses include industrial control equipment, USB-connected embedded systems, Ethernet-connected controllers, human-machine interfaces, communications equipment, and consumer products. Designers should confirm the exact peripheral pin mapping, clock configuration, power requirements, memory organization, and software support from the official NXP datasheet before layout or firmware development. A key design consideration is that this is a complex mixed-signal embedded controller. Decoupling, clock routing, high-speed USB and Ethernet signal integrity, exposed-pad or thermal management requirements, and correct startup configuration must be planned early in the PCB design process. This page combines verified manufacturer and distributor information with practical engineering guidance. It distinguishes confirmed LPC4357JBD208E attributes from unavailable details and focuses on helping engineers evaluate the MCU for real embedded designs rather than repeating generic catalog information.

Permintaan RFG Kontak
LPC4357JBD208K - ARM Cortex-M4/M0 MCU, 1MB Flash, 208-LQFP | NXP
LPC4357JBD208K

LPC4357JBD208K - ARM Cortex-M4/M0 MCU, 1MB Flash, 208-LQFP | NXP

The NXP LPC4357JBD208K is a 32-bit dual-core ARM Cortex-M4/M0 microcontroller with up to 204 MHz performance, 1 MB of on-chip flash, and 136 kB of SRAM, housed in a 208-pin LQFP (28x28) package. It integrates a Cortex-M4 core with a Cortex-M0 coprocessor for offloading I/O and peripheral handling, plus 16 kB of EEPROM, a quad SPI Flash Interface (SPIFI), two High-speed USB ports, an Ethernet MAC, an LCD controller, and an External Memory Controller (EMC). An MCU (microcontroller unit) is a single-chip computer that integrates a CPU, memory (flash/SRAM), and programmable peripherals around a shared internal bus. The ARM Cortex-M family is a 32-bit RISC core family from Arm, and the Cortex-M4 (with FPU, DSP extensions) and Cortex-M0 (smallest, lowest-gate-count) are upward code- and tool-compatible, allowing a Cortex-M4 main core to be paired with a Cortex-M0 I/O coprocessor inside one chip. LPC43xx sits in NXP's high-performance MCU portfolio aimed at embedded applications that need both DSP-class signal processing and deterministic I/O. Key features include dual-core asymmetric processing (M4 main + M0 coprocessor), 1 MB flash, 136 kB SRAM, 16 kB EEPROM, SPIFI for off-chip quad-SPI flash expansion, an SCT (State Configurable Timer) for complex PWM/capture sequences, SGPIO for high-speed serial I/O, two High-speed USB (one with on-chip HS PHY), Ethernet, an LCD controller supporting STN/TFT panels, and an EMC for SRAM/SDRAM/NOR/NAND. The 208-LQFP (28x28) package provides a thermal resistance suitable for industrial ambient operation with moderate copper pour. Architecture depth: the Cortex-M4 core provides single-precision floating point and DSP (SIMD) instructions, while the Cortex-M0 coprocessor is intended to handle low-latency peripheral routines (for example, USB or motor-control loops) without disturbing the M4 application. A multi-layer AHB bus matrix routes independent masters (CPU, DMA, USB, Ethernet) to on-chip SRAM banks to minimize contention, and the SCT allows event-driven timing that can replace multiple capture/compare timers. Typical applications include industrial drives and motor control (using SCT and dual cores), HMI panels (LCD + touch + Ethernet), USB peripherals and hubs (HS USB host/device), embedded connectivity gateways (Ethernet + SPIFI for large external flash), test and measurement instruments, and audio front ends that benefit from M4 DSP + M0 I/O separation. When designing with this device, ensure the 208-LQFP power and ground pins are properly decoupled and that the SPIFI is only enabled when the application actually requires off-chip quad-SPI flash; otherwise keep it disabled to save power. Verify that the operating temperature grade (commercial 0 to 70 C, or industrial -40 to +85 C / -40 to +105 C depending on suffix) matches the end-equipment environment. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Permintaan RFG Kontak
LPC4357JET256 - Dual Cortex-M4/M0 MCU 1MB Flash | NXP
LPC4357JET256

LPC4357JET256 - Dual Cortex-M4/M0 MCU 1MB Flash | NXP

The NXP LPC4357JET256 is a dual-core 32-bit microcontroller combining an Arm Cortex-M4 core and an Arm Cortex-M0 coprocessor, packaged in a 256-ball LBGA (17x17 mm) and operating at up to 204 MHz. The Cortex-M4 core delivers 1.25 DMIPS/MHz with FPU and DSP extensions, while the Cortex-M0 coprocessor handles peripheral offload and real-time housekeeping. The device integrates 1 MB of on-chip flash, 136 kB of SRAM, and 16 kB of EEPROM for parameter storage, supporting IEC 60335 Class B firmware upgrades without external memory in many designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals onto one die. The LPC4357 belongs to the high-performance tier of microcontrollers, sitting architecturally above single-core Cortex-M parts but below Cortex-A application processors. Within the power-management hierarchy it ranks as a master controller, and within NXP's portfolio it is part of the LPC4300 family, which is positioned for embedded applications requiring mixed signal/digital workloads and rich connectivity. Key features include dual High-Speed USB 2.0 controllers (one Host/Device/OTG, one Host), a 10/100 Ethernet MAC with MII/RMII, an LCD controller supporting up to 1024x768, an External Memory Controller (EMC) for SDRAM/NOR/NAND, a quad SPI Flash Interface (SPIFI) up to 80 MB/s, two CAN 2.0B ports, an SD/MMC card interface, a State Configurable Timer (SCT), a Serial General Purpose I/O (SGPIO) peripheral, and 164 general-purpose I/O pins. The 16 kB EEPROM with on-the-fly erase/write and a 4 KB ROM bootloader with In-System Programming (ISP) and In-Application Programming (IAP) are particularly valuable for field-upgradable designs. The dual-core architecture uses an ARM Cortex-M4 with single-precision FPU, DSP/SIMD instructions, and a Nested Vectored Interrupt Controller (NVIC), paired with the Cortex-M0 supporting peripheral scheduling and deterministic interrupt handling. The asynchronous multi-master AHB bus matrix allows both cores to access on-chip memory and peripherals concurrently, enabling deterministic latency even under heavy I/O. According to NXP's product literature, the LPC4357JET256 targets embedded graphics, industrial HMI, and motor control applications. Typical applications include industrial Human-Machine Interfaces (HMI) with TFT LCD, point-of-sale terminals, factory automation controllers, motor drives and inverter control, smart-grid energy monitors, and embedded audio with USB streaming. Designers choose the LPC4357 when they need more processing headroom than a single-core Cortex-M4 can deliver, without paying for a Cortex-A-class application processor. When designing with this part, ensure the LBGA256 PCB footprint includes 4 thermal vias under the exposed die paddle to keep junction temperature below 110 °C; pair SPIFI with the high-speed flash part recommended in the user manual for best throughput; and use the on-chip EEPROM for non-volatile parameters that must survive flash reprogramming. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the NXP datasheet alone.

Permintaan RFG Kontak
LPC4367JBD208E - 204MHz Dual-Core Cortex-M4/M0 MCU | NXP
LPC4367JBD208E

LPC4367JBD208E - 204MHz Dual-Core Cortex-M4/M0 MCU | NXP

The NXP LPC4367JBD208E is a dual-core 32-bit microcontroller based on Arm Cortex-M4 and Cortex-M0 processor cores, operating at up to 204 MHz. It integrates 1 MB of flash memory and 154 kB of SRAM in a 208-lead LQFP package measuring 28 x 28 mm. Ethernet, two high-speed USB interfaces, LCD support, and EMC features make it suitable for connected industrial, communications, and human-machine-interface equipment. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, peripherals, and communication interfaces into one package. The Cortex-M4 core handles real-time control and DSP-oriented processing, while the Cortex-M0 core can execute supporting tasks, offload background work, or provide a dedicated boot and communications path. This heterogeneous dual-core architecture belongs to the ARM Cortex-M family of low-power embedded processors. The LPC4367JBD208E combines 1 MB of on-chip flash with 154 kB of SRAM for code, data storage, frame buffering, and Ethernet or USB data handling. Its processor includes a memory protection unit supporting eight regions and a nested vectored interrupt controller for deterministic interrupt servicing. The 208-LQFP package provides extensive external connectivity for industrial control, network interface, display, and USB applications. The device integrates Ethernet, two high-speed USB ports, and LCD-related functionality. These interfaces allow one microcontroller to manage network traffic, USB connectivity, graphical output, and real-time control functions without requiring separate communication controllers. The combination of a 204 MHz Cortex-M4 core and an auxiliary Cortex-M0 core is particularly useful when control-loop workload must be isolated from service tasks or connectivity stacks. Typical applications include industrial Ethernet controllers, USB-to-Ethernet bridges, connected test equipment, building automation gateways, human-machine interfaces, and embedded data acquisition systems. The dual-core design can also support protocol handling alongside real-time sampling or motor-control workloads where deterministic task separation improves system responsiveness. When laying out the 208-LQFP board, follow the NXP datasheet pin-assignment table for every supply, ground, analog, and high-speed signal connection. Place decoupling capacitors at each supply pin, route Ethernet and USB differential pairs with controlled geometry, and keep the M4 and M0 clock, reset, and debug interfaces accessible for production programming and fault diagnosis. This page consolidates the NXP device specifications, package and memory details, interface capabilities, drop-in family alternatives, and practical layout guidance. It also provides parameter comparisons and engineering notes that support design review, sourcing, PCB planning, and long-term maintenance of LPC43xx-based products.

Permintaan RFG Kontak
LPC4367JET100E - 204MHz Dual-Core Cortex-M4/M0 MCU, 1MB Flash | NXP
LPC4367JET100E

LPC4367JET100E - 204MHz Dual-Core Cortex-M4/M0 MCU, 1MB Flash | NXP

The NXP Semiconductors LPC4367JET100E is a high-performance 32-bit dual-core microcontroller built on Arm Cortex-M4/M0, operating up to 204 MHz with 1 MB (1M x 8) on-chip flash and 154 kB of on-chip SRAM in a 100-ball TFBGA (9x9 mm) package. It integrates Ethernet, two high-speed USB ports, an LCD controller and EMC peripherals. A microcontroller is a programmable system-on-chip that integrates a CPU core, memory and peripherals onto one die. The LPC43xx family belongs to the embedded microcontroller segment of integrated circuits, sitting between simple 8/16-bit controllers and higher-end application processors. Its Arm Cortex-M4 core carries the main application workload while an Arm Cortex-M0 subsystem handles peripheral management, and the M0 coprocessor is explicitly designed as a replacement for existing 8/16-bit microcontrollers with up to 204 MHz performance and a reduced code size. Key features of the LPC4367JET100E include dual-core operation at 204 MHz, 1 MB of flash for firmware and data, 154 kB of SRAM for working buffers, and 16 kB of on-chip EEPROM for parameter storage. The Cortex-M0 hardware multiply is implemented as a 32-cycle iterative multiplier, which keeps coprocessor execution deterministic. Two independent high-speed USB interfaces allow simultaneous host/device or dual-device connectivity, and the integrated Ethernet MAC supports networked industrial and communications equipment. Internally, the device combines an Arm Cortex-M4 processor with an Arm Cortex-M0 subsystem for managing peripherals, plus a separate Cortex-M0 coprocessor. Memories and peripherals sit behind an efficient bus matrix, and the LCD controller and EMC peripherals support display-driven human-interface designs. The LPC436x family targets embedded applications that need connectivity plus real-time control. Typical applications include industrial Ethernet gateways, USB-to-Ethernet bridges, PLC and data-acquisition controllers, human-machine interface panels with integrated LCD, and connected sensor or building-automation nodes. Because the MCU integrates USB, Ethernet and LCD control in one package, many designs replace a multi-chip processor-plus-interface solution. When designing with the LPC4367JET100E, plan power and decoupling carefully around the 204 MHz core, keep high-speed USB and Ethernet traces short and reference-controlled, and leave the BGA escape routing dense enough for clean layer changes. A 100-ball TFBGA also demands a careful ball-map review and adequate thermal vias under the die. This page assembles the NXP product information, distributor availability listings and the LPC436x family datasheet into one engineering reference, adding drop-in alternatives, parameter-by-parameter comparison and practical design notes that go beyond the manufacturer overview.

Permintaan RFG Kontak
LPC4367JET256E - 204MHz Dual-Core MCU | NXP | 256-LBGA
LPC4367JET256E

LPC4367JET256E - 204MHz Dual-Core MCU | NXP | 256-LBGA

NXP LPC4367JET256E is a 32-bit dual-core microcontroller built around Arm Cortex-M4/M0 processor cores, operating up to 204 MHz, with 1 MB of embedded flash, 154 kB of SRAM, and 16 kB of EEPROM in a 256-LBGA package measuring 17 x 17 mm. It integrates Ethernet, two high-speed USB interfaces, and LCD support for connected embedded systems. A microcontroller is a programmable semiconductor that combines a processor core, nonvolatile program memory, working memory, and peripherals in one package. The LPC4367JET256E belongs to the Arm Cortex-M family and provides a higher-performance M4 core alongside an M0 subsystem for managing peripherals. Its integration supports connected industrial equipment, human-machine interfaces, data acquisition systems, and embedded network controllers without requiring separate devices for several common communication functions. The headline configuration combines 204 MHz maximum processing speed, 1 MB of flash, and 154 kB of SRAM. Its dual-core architecture can divide real-time peripheral-control work from higher-level application processing. The integrated Ethernet interface supports networked equipment, while two high-speed USB interfaces support direct connectivity, configuration, or peripheral expansion. The LCD interface is useful for control panels and local graphical status displays. NXP describes the LPC4367JET256E as a high-performance 32-bit MCU based on Arm Cortex-M4/M0. The 256-ball BGA package provides 256 physical contacts and supports the dense integration required by the Ethernet, USB, LCD, memory, and general-purpose I/O resources. The verified product information also identifies EMC support as part of the device capability set. Exact pin functions, complete electrical limits, and detailed timing parameters must be confirmed against the official NXP datasheet before schematic capture or PCB layout. Typical uses include industrial Ethernet controllers, USB-equipped data acquisition units, programmable logic and test equipment, LCD-based operator interfaces, and embedded gateways. The M4/M0 combination is particularly useful when deterministic peripheral management must coexist with more demanding protocol processing or application logic. PCB design should preserve the LBGA escape-routing channels, provide suitable power and decoupling networks, and follow NXP layout guidance. Because this package has a high ball count and fine pitch, assembly capability, via-in-pad requirements, thermal-via density, and solder-mask design should be reviewed with the board fabricator before release. This page consolidates the verified manufacturer and distributor information for the LPC4367JET256E, including its core architecture, memory configuration, package, connectivity, price reference, and traceable source links. It also separates verified facts from unavailable electrical details and highlights where an engineer must consult the official NXP datasheet before making a drop-in or layout decision.

Permintaan RFG Kontak
LPC4370FET100E - Cortex-M4/M0 MCU with Ethernet | NXP
LPC4370FET100E

LPC4370FET100E - Cortex-M4/M0 MCU with Ethernet | NXP

NXP Semiconductors LPC4370FET100E is a 32-bit, flashless embedded microcontroller combining one Arm Cortex-M4 core with two Cortex-M0 cores, providing 282 kB of SRAM in a TFBGA-100 package. The device also integrates Ethernet, two high-speed USB controllers, and a 12-bit ADC capable of 80 Msps. These resources make the LPC4370FET100E suitable for connected industrial equipment, data acquisition systems, and embedded network controllers requiring substantial RAM and extensive peripheral connectivity. A microcontroller is a programmable semiconductor that combines a processor core, memory interfaces, communication peripherals, timers, and analog or digital I/O on one integrated circuit. The LPC4370 architecture extends the Cortex-M4 concept with a dedicated Cortex-M0 coprocessor and a separate Cortex-M0 peripheral-management subsystem. Within the embedded-controller hierarchy, this arrangement combines application-processing capability with hardware that can offload communication, control, or peripheral tasks while reducing main-core interrupt overhead. The principal features include 282 kB of SRAM, a flashless architecture for external program-memory support, two high-speed USB interfaces, Ethernet connectivity, and an 80 Msps 12-bit ADC. The 204 MHz Cortex-M4 processing capability supports demanding control loops, protocol processing, and real-time embedded workloads. Configurable peripherals such as the State Configurable Timer and Serial General Purpose I/O interface allow timing and signal-routing functions to be adapted to application-specific requirements. The mixed-core design allows the Cortex-M4 processor to execute the main application while the Cortex-M0 subsystem handles peripheral management and the additional Cortex-M0 core can support a coprocessor workload. This division can improve deterministic response and isolate timing-sensitive activity from the primary application. The flashless configuration is important for systems that use external QSPI flash, code-execution security mechanisms, or a boot architecture requiring the MCU to operate as the system controller without embedded program memory. Typical applications include industrial Ethernet bridges, high-speed data loggers, USB-to-Ethernet gateways, programmable logic controllers, motor-control equipment, and instrumentation with high-speed analog sampling. Ethernet and dual high-speed USB make the device especially relevant to gateways that must bridge industrial networks and service interfaces. Its 282 kB SRAM also benefits data-intensive control systems that require buffering without immediately transferring every sample to external storage. PCB design should preserve clean power distribution and controlled impedance for Ethernet and high-speed USB. Place bypass capacitors close to supply pins, route sensitive analog inputs away from digital switching nodes, and follow the manufacturer’s recommended TFBGA-100 land pattern and via configuration. Because this is a flashless MCU, the external memory interface and boot configuration also require careful planning to prevent bus contention and timing problems during startup. This page combines the manufacturer product information, memory and connectivity characteristics, application guidance, comparison parameters, and practical PCB considerations into a focused engineering reference. It also identifies the limits of current cross-reference information so designers can distinguish a confirmed package match from a device that still requires firmware, boot, and electrical verification.

Permintaan RFG Kontak
LPC4370FET100K - 204MHz Tri-Core MCU | NXP | Industrial
LPC4370FET100K

LPC4370FET100K - 204MHz Tri-Core MCU | NXP | Industrial

The NXP Semiconductors LPC4370FET100K is a 32-bit Arm Cortex-M4 and two Cortex-M0 microcontroller with a 204 MHz primary core, 282 kB of SRAM, and a 100-TFBGA 9 x 9 mm package. The flashless device integrates Ethernet, two high-speed USB controllers, and an 80 Msps 12-bit ADC for connected embedded systems. A microcontroller is a programmable system-on-chip containing a processor core, memory, peripherals, and interface controllers on one package. The LPC4370 belongs to the 32-bit embedded MCU hierarchy and combines a Cortex-M4 application core with two Cortex-M0 cores for peripheral management and real-time control. Its mixed-core architecture can offload time-critical tasks while the primary core handles application logic and high-bandwidth communications. The LPC4370FET100K provides 204 MHz processing performance, 282 kB of SRAM, Ethernet, two high-speed USB ports, and an 80 Msps 12-bit ADC. The 12-bit converter combines sampling speed with sufficient resolution for many industrial monitoring, sensor acquisition, and control tasks. Its extensive serial, communications, timing, and configurable peripheral resources support data acquisition, communications equipment, industrial controllers, and connected embedded products. The Cortex-M4 core uses a three-stage pipeline, Harvard architecture, separate instruction and data buses, and a peripheral bus. This organization supports efficient concurrent access to code, data, and peripherals. The two Cortex-M0 resources are useful for managing peripherals or executing deterministic control functions without loading the main application core. The exact internal flash, memory, and peripheral configuration should be confirmed in the manufacturer LPC4370 product data sheet before firmware and board design begin. Typical applications include Ethernet-connected industrial controllers, high-speed USB data-acquisition equipment, environmental monitoring systems, factory automation nodes, and embedded gateways. Ethernet and dual high-speed USB support provide multiple paths for host connectivity, diagnostics, firmware update, and external storage or sensor interfaces. The 80 Msps ADC also makes the device suitable for rapid analog signal acquisition when paired with suitable front-end circuitry. PCB implementation requires careful attention to the 100-TFBGA footprint, high-speed USB routing, Ethernet impedance control, analog-input conditioning, and exposed-pad thermal management. Place decoupling capacitors close to their associated supply pins, use short return paths for high-speed signals, and follow the manufacturer package and layout guidance. Confirm all pin assignments and board dimensions against the LPC4370 product data sheet. This page combines the manufacturer product information with engineering-oriented application guidance, package considerations, a structured comparison against identified NXP family alternatives, and practical design notes. It helps engineers evaluate whether the LPC4370FET100K provides the required processing, connectivity, conversion performance, and package density for a specific embedded design.

Permintaan RFG Kontak
LPC4370FET256E - Tri-Core 204MHz MCU with 282kB SRAM | NXP
LPC4370FET256E

LPC4370FET256E - Tri-Core 204MHz MCU with 282kB SRAM | NXP

The NXP Semiconductors LPC4370FET256E is a 32-bit tri-core Arm Cortex-M4 and Cortex-M0 microcontroller with a 204 MHz maximum CPU frequency, 282 kB of SRAM, and a 256-LBGA package measuring 17 x 17 mm. It is ROMless and operates from a 3.3 V supply according to the verified product listings. The LPC4370 combines one Cortex-M4 core with two Cortex-M0 cores, allowing control-intensive and communication-related tasks to be distributed across the processing architecture. A microcontroller is a programmable system-on-chip that integrates a processor core, memory interfaces, peripherals, and communication controllers onto one package. The LPC4370 belongs to the Arm Cortex-M4 microcontroller family and extends the platform with two Cortex-M0 subsystems for peripheral management. This hierarchy places it within embedded processors, where deterministic control, connectivity, and configurable peripherals are combined in a single device. Verified feature data identifies 282 kB of SRAM, Ethernet connectivity, two high-speed USB controllers, an 80 Msps 12-bit ADC, LCD support, configurable timers, and serial GPIO. The three-core arrangement can separate real-time I/O or protocol handling from higher-level application processing. Its 204 MHz Cortex-M4 core provides substantial computation for communications gateways, industrial controllers, and connected embedded equipment. The LPC4370 uses advanced configurable peripherals such as the State Configurable Timer and Serial General Purpose I/O interface. These resources can be adapted to application-specific timing, trigger, routing, or communication requirements rather than relying only on fixed peripheral functions. The two high-speed USB controllers, Ethernet interface, and 12-bit ADC also reduce the need for external interface devices when the board design requires several data acquisition and communications paths. Typical applications include industrial automation, Ethernet-connected control systems, high-speed data acquisition, human-machine interfaces with LCD support, and embedded gateways. The 256-LBGA package exposes a large number of I/O and peripheral resources, but its fine-pitch construction requires careful PCB layout, inspection, and assembly capability. Designers should confirm external memory configuration, pin multiplexing, power integrity, differential-signal routing, and thermal performance against the manufacturer datasheet. Because this part is ROMless, a boot strategy and external nonvolatile storage must be planned at the system level. Software compatibility, peripheral errata, and toolchain support should also be checked before production release. This page combines verified manufacturer and distributor information with package, sourcing, comparison, and design considerations. It identifies where the LPC4370FET256E fits and explicitly marks specifications that require confirmation rather than presenting unsupported values as facts.

Permintaan RFG Kontak
LPC43S20FET180E - 204MHz Dual-Core MCU | NXP | Embedded
LPC43S20FET180E

LPC43S20FET180E - 204MHz Dual-Core MCU | NXP | Embedded

NXP LPC43S20FET180E is a 32-bit dual-core Arm microcontroller for embedded applications, combining an Arm Cortex-M4 processor, an Arm Cortex-M0 coprocessor, 200 kB of SRAM, and a maximum operating frequency of 204 MHz in a 180-ball TFBGA package measuring 12 x 12 mm. The ROMless design requires external nonvolatile memory for program storage. A microcontroller is a programmable semiconductor that integrates a processor core, memory interfaces, communication peripherals, timers, and digital I/O into one device. The LPC43S20 belongs to the microcontroller, embedded processor, and semiconductor hierarchy. Its asymmetric dual-core architecture can divide work between the Cortex-M4 and Cortex-M0 cores, making it useful where control-loop performance and lower-power background processing must coexist in a compact embedded platform. Key features include an AES engine for hardware-assisted security, a high-speed USB controller, an external memory controller, configurable SCTimer/PWM resources, and the SGPIO interface. The device also includes connectivity described as CANbus, EBI/EMI, I2C, SD, SPI, UART/USART, and USB OTG. These interfaces support industrial control, communications equipment, data acquisition, and USB-connected embedded products without requiring a separate collection of peripheral devices. The Cortex-M4 core provides the primary high-performance processing path, while the Cortex-M0 coprocessor supports additional control tasks. The 204 MHz clock rating allows computationally intensive routines to execute at a substantially higher clock rate than typical low-power microcontroller cores. The 200 kB SRAM provides internal working memory, while the external memory interface allows designs to use external storage when boot code, firmware images, trace data, or working sets exceed internal SRAM capacity. Typical uses include industrial automation controllers, USB data-acquisition equipment, motor and motion-control systems, communication gateways, and embedded security appliances. For these applications, the combination of USB, serial interfaces, timers, external memory, and dual processing cores supports connected control systems with multiple concurrent workloads. The ROMless architecture is also appropriate when firmware updateability, code protection, or separate storage between the MCU and application data is required. PCB design must account for the 180-ball BGA footprint, high-speed routing requirements, decoupling, ground-plane continuity, and external memory implementation. Because the device is ROMless, boot configuration, programming, and external flash design are central to a working system rather than optional add-ons. Review the pin-description and connection tables in the NXP datasheet before assigning power, ground, clocks, and communication signals. This product page consolidates the manufacturer architecture description, package and connectivity details, procurement information, drop-in-family analysis, and practical implementation guidance into a single engineering reference. It also distinguishes verified pin-compatible family members from cross-reference candidates that do not establish true drop-in equivalence.

Permintaan RFG Kontak
LPC43S30FET100E - 204MHz Cortex-M4/M0 MCU | NXP
LPC43S30FET100E

LPC43S30FET100E - 204MHz Cortex-M4/M0 MCU | NXP

The NXP LPC43S30FET100E is a 32-bit dual-core microcontroller built around an Arm Cortex-M4 processor and an Arm Cortex-M0 coprocessor. It operates at up to 204 MHz, provides 264 kB of SRAM, and is housed in a 100-TFBGA package measuring 9 x 9 mm. The device also includes an AES security engine, two high-speed USB controllers, Ethernet connectivity, advanced configurable timers, and serial general-purpose I/O. A dual-core microcontroller is an embedded processing device that executes application code on a primary Arm Cortex-M4 core while using an Arm Cortex-M0 core for dedicated control or peripheral tasks. This heterogeneous architecture belongs to the microcontroller hierarchy: embedded controller, 32-bit MCU, Arm Cortex-M processor, and system-on-chip. It can improve real-time workload partitioning compared with a single-core design without requiring a separate controller for every peripheral function. The LPC43S30FET100E combines a 204 MHz Cortex-M4 core with a Cortex-M0 coprocessor in one package. Up to 264 kB of SRAM supports protocol buffers, display data, and real-time control state. Integrated Ethernet supports connected equipment, while the dual high-speed USB controllers can simplify USB host or device connectivity. The AES engine adds hardware-assisted encryption for data protection and authenticated communication workflows. The LPC43S30 series combines conventional microcontroller peripherals with programmable and serial peripherals. SCTimer and PWM resources provide flexible timing and motor-control functions, while SGPIO extends serial I/O capability beyond standard UART and SPI interfaces. These resources allow an embedded design to consolidate functions that would otherwise require additional programmable logic, interface controllers, or discrete peripherals. Typical applications include industrial Ethernet controllers, connected test equipment, secure embedded gateways, USB-to-Ethernet bridges, high-speed data acquisition systems, and motor-control platforms. The Cortex-M4 core is suited to protocol processing and real-time control, while the Cortex-M0 coprocessor can service timing-sensitive or low-level tasks. Its 100-TFBGA footprint supports compact designs but requires careful escape routing and exposed-pad thermal management. Board design should follow the manufacturer pin and land-pattern guidance for the 100-TFBGA package. Place decoupling capacitors close to the supply pins, preserve the required via and ball-pitch constraints, and use thermal vias beneath the exposed pad. Confirm the PCB stack-up, assembly process, and ground-plane continuity before releasing a production design. This product page combines the LPC43S30FET100E core architecture and interface capabilities with practical design guidance, package information, sourcing answers, and a focused comparison of pin-compatible NXP options for engineers evaluating secure dual-core embedded platforms.

Permintaan RFG Kontak
LPC43S30FET256E - 204MHz Dual-Core MCU | NXP | 256-LBGA
LPC43S30FET256E

LPC43S30FET256E - 204MHz Dual-Core MCU | NXP | 256-LBGA

NXP LPC43S30FET256E is a 32-bit dual-core Arm Cortex-M4/M0 microcontroller rated at 204 MHz, with 264 kB of SRAM and AES security hardware, packaged in a 256-LBGA 17 x 17 mm package. It is designed for embedded applications requiring real-time control, Ethernet, two high-speed USB controllers, and configurable peripheral functions. An Arm Cortex-M4 microcontroller is a 32-bit embedded processor built around the Arm Cortex-M architecture. The LPC43S30FET256E combines a Cortex-M4 main processor with a Cortex-M0 coprocessor, creating a platform within the hierarchy of microcontroller, embedded processor, and semiconductor. This dual-core arrangement allows control-intensive tasks and simpler auxiliary work to be organized within one device. Key device features include up to 264 kB of SRAM, a hardware AES engine, Ethernet connectivity, two high-speed USB controllers, SCTimer and PWM resources, and the Serial General-Purpose I/O interface. The Cortex-M0 coprocessor is code- and tool-compatible with the Cortex-M4 core and can provide up to 204 MHz performance with a simpler instruction set and reduced code footprint. The part is ROMless, so an external nonvolatile memory device is required for persistent program storage. The manufacturer identifies the LPC43S30FET256 family for embedded systems combining high-performance control, communications, and configurable timing. Its dual-core architecture can help partition interrupt-heavy or utility workloads, while the Cortex-M0 core supports energy-efficient execution. Typical applications include industrial automation controllers, Ethernet-connected embedded systems, USB host or device equipment, motor-control and power-management systems, and communications infrastructure requiring multiple serial peripherals. Two high-speed USB controllers are especially useful for systems that need simultaneous USB connectivity, while Ethernet supports network-connected monitoring and control functions. PCB design should account for the 256-ball BGA footprint, high-speed USB and Ethernet signal routing, and the external memory interface required by the ROMless architecture. Power sequencing, decoupling, and signal-integrity layout should follow the pin-description and layout guidance in the NXP documentation for the LPC43S30FET256 family. This product page combines the manufacturer overview, exact-orderable-package information, sourcing guidance, drop-in replacement analysis, and practical engineering considerations for the LPC43S30FET256E. It is intended to help engineers confirm architecture, memory, package, connectivity, and replacement requirements before beginning a 256-LBGA layout.

Permintaan RFG Kontak