MCIMX6S4AVM08AB
MCIMX6S4AVM08AB - i.MX6 Solo 800MHz ARM Cortex-A9 MPU | NXP
The NXP MCIMX6S4AVM08AB is an i.MX 6Solo applications processor based on a single-core ARM Cortex-A9 core running at 800 MHz, packaged in a 624-pin MAPBGA (21x21 mm). The part integrates an LCD controller, GPU (GC880 3D plus 2D), hardware video codecs (VPU), dual-camera MIPI-CSI interfaces, and a rich set of connectivity peripherals including USB, PCIe, Ethernet, and multiple SDIO/UART/I2C/SPI ports, targeting multimedia-rich consumer embedded applications.
An applications processor (AP) is a system-on-chip (SoC) class of microprocessor designed to run high-level operating systems (Linux, Android, Windows Embedded) and execute the bulk of user-facing workloads in an embedded system. Architecturally, an AP combines one or more CPU cores with on-chip SRAM/DRAM controllers, a graphics processing unit (GPU), hardware accelerators for media codecs, and a multi-standard fabric of peripheral interfaces. Within the broader semiconductor taxonomy, the i.MX6S belongs to the applications processor family, which sits above general-purpose microcontrollers (MCU) in integration and processing capacity, and below desktop CPUs in raw performance.
Key features of the MCIMX6S4AVM08AB include a single Cortex-A9 core at 800 MHz with 32 KB L1 instruction cache and 32 KB L1 data cache per core, plus a 512 KB unified L2 cache. The integrated GC880 GPU supports OpenGL ES 2.0 and OpenVG 1.1, while the VPU handles H.264 BP, MPEG-4, H.263, and MJPEG decoding up to 1080p30. Two MIPI-CSI camera ports, one 24-bit parallel RGB LCD interface up to WXGA (1366x768), and PCIe 2.0 (one x1 lane) make the silicon particularly suited to multimedia human-machine interface (HMI) designs.
Process technology is 40 nm low-power CMOS from NXP/Freescale, paired with multi-voltage domains (1.8 V/2.5 V/2.8 V/3.15 V) managed by the on-chip Smart Speed Technology (SST) power-management controller. The 624-pin MAPBGA 21x21 mm package exposes 32-bit DDR3/LPDDR2 memory controller, two SD3.0/MMC4.4 ports, three USB 2.0 controllers (one OTG with PHY), and a 10/100/1000 Ethernet MAC, with peripheral bandwidth exceeding 4 GB/s aggregate.
Typical applications include industrial human-machine interface (HMI) panels, point-of-sale terminals, portable medical imaging, smart-home gateways, single-board computers (SBC) and embedded Linux development kits, e-readers, and automotive infotainment entry-level head units. The device's combination of integrated GPU plus hardware video decode at 1080p30 makes it a practical choice for fanless, low-power multimedia designs.
Designers should plan a 6-layer PCB minimum for the DDR3 routing, allocate the 21x21 mm BGA fanout with 0.8 mm pitch, and follow NXP reference designs for PMIC sequencing (PFET family PF3000/PF3001 companion). For multimedia workloads, ensure the VPU clock is configured for the target frame rate; for Linux/Android BSP support, use NXP's i.MX 6 BSP and U-Boot bootloader validated on the i.MX 6Solo SABRE-SD platform.
This page synthesizes verified distributor pricing, datasheet extracts, and same-family NXP i.MX6 alternatives in a single place, complementing NXP's i.MX 6Solo reference manual with curated design notes and cross-reference links not found in a single manufacturer document.
Permintaan RFG
Kontak